Zaloguj się

Gotowe bibliografie tematyczne / Prototype system / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Prototype system.

Artykuły w czasopismach na temat „Prototype system”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 12 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Prototype system”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Shankar, Mr A. Ravi, Dr S. Kishore Reddy i Dr Sultan Feisso. "Prototype of Total Artificial Heart System". International Journal of Trend in Scientific Research and Development Volume-1, Issue-6 (31.10.2017): 850–55. http://dx.doi.org/10.31142/ijtsrd4693.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Crouhy, Michel, Dan Galai i Robert Mark. "Prototype risk rating system". Journal of Banking & Finance 25, nr 1 (styczeń 2001): 47–95. http://dx.doi.org/10.1016/s0378-4266(00)00117-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Altobelli, Frank, Henry F. Taylor i Leonhard E. Bernold. "Prototype Robotic Masonry System". Journal of Aerospace Engineering 6, nr 1 (styczeń 1993): 19–33. http://dx.doi.org/10.1061/(asce)0893-1321(1993)6:1(19).

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Abazov, Victor, Gennady Alexeev, Maxim Alexeev, Vladimir Frolov, Georgy Golovanov, Sergey Kutuzov, Alexei Piskun i in. "PANDA Muon System Prototype". EPJ Web of Conferences 177 (2018): 04001. http://dx.doi.org/10.1051/epjconf/201817704001.

Pełny tekst źródła

Streszczenie:

The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR) which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS) at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

Style APA, Harvard, Vancouver, ISO itp.

5

Liu, Mengchi. "The Relationlog system prototype". Software: Practice and Experience 31, nr 5 (2001): 409–43. http://dx.doi.org/10.1002/spe.378.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Chimenti, D., R. Gamboa, R. Krishnamurthy, S. Naqvi, S. Tsur i C. Zaniolo. "The LDL system prototype". IEEE Transactions on Knowledge and Data Engineering 2, nr 1 (marzec 1990): 76–90. http://dx.doi.org/10.1109/69.50907.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Soehren, W., i W. Hawkinson. "Prototype personal navigation system". IEEE Aerospace and Electronic Systems Magazine 23, nr 4 (kwiecień 2008): 10–18. http://dx.doi.org/10.1109/maes.2008.4493437.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Nuswantari, Ayu, Ying-Tien Wu i Herman Dwi Surjono. "The Synchronous Online Argumentation System User Interface with an Integrated Design Framework: Redesign and Evaluation". JPI (Jurnal Pendidikan Indonesia) 9, nr 1 (31.03.2020): 106. http://dx.doi.org/10.23887/jpi-undiksha.v9i1.23104.

Pełny tekst źródła

Streszczenie:

The Synchronous online argumentation system is highly needed to facilitate learning activity in this internet era. To gain deeper insights about this important issue, this study developed nine principles based on Cognitive Load, User Interface, and User Experience to redesign a system. With this framework, 48 (forty-eight) students of Chi-Ying High School had tested with two prototypes, and the second prototype used the nine principles. The systems were measured with Web-Based Learning Environment (WEBLEI) and System Usability Test (SUS). The result of WEBLEI measurement shows that the second prototype gives better result and shows higher user acceptance than the first prototype. The result of SUS measurement shows that the usability of the second prototype is better than on the first prototype with (4.43) SUS score difference. The result shows that the use of nine principles that applied to the second prototype does increase the usability and acceptance of the students.

Style APA, Harvard, Vancouver, ISO itp.

9

Gulay, A. V., i V. M. Zaitsev. "Intelligent system construction as consequent transformation of the model range of its functional prototypes". Doklady BGUIR 19, nr 1 (23.02.2021): 37–45. http://dx.doi.org/10.35596/1729-7648-2021-19-1-37-45.

Pełny tekst źródła

Streszczenie:

Application of the technology of consecutive construction of the functionally expanding model range of structural system prototypes is an advanced conceptual development direction of intellectual systems construction methods. The guiding principle of intellectual system construction under the suggested technology is that a highly sophisticated system is worked out and adjusted by stages with the use of the structural increment and functional complexity parallel-sequential scheme. At every construction step it is implemented in the form of a hardware and software complex – the structural prototype with a certain set of allocated components and performed functions. The structural prototype is understood as a certain version of its construction in the form of a logical or physical model, which includes a predetermined set of information, technical and software tools, performs system functions, makes it possible to evaluate the achieved parameter levels, as well as ensures further system build-up and development. Verbal-heuristic and graphic-heuristic models, which reflect the set of original requirements and the intelligent system structure, are used as mandatory prototypes of primary levels. The mandatory prototype of subsequent levels of the system technology includes a material model of the system nucleus, which combines hardware and software components, where joint functioning delivers the required set of integrative systematic properties. Sequential step-by-step choice of all the more complex prototypes with simultaneous enrichment of the composition of applied tools and performed system functions forms the expanded model range of the system. In the practice of systems development it is limited with a certain upper level prototype, which meets preset technical requirements to the system. Step-by- step development and adjustment of models, which are highly complicated prototypes, with the use of the parallel-sequential scheme of their structural enrichment and functional complication, is the effective technological trend of co-engineering.

Style APA, Harvard, Vancouver, ISO itp.

10

Domingo, L., D. Moore, D. Sirkin, G. Toye, L. Leifer i M. Cutkosky. "STRATEGIC PROTOTYPING TO LEARN IN STANFORD UNIVERSITY'S ME310 DESIGN INNOVATION COURSE". Proceedings of the Design Society: DESIGN Conference 1 (maj 2020): 1687–96. http://dx.doi.org/10.1017/dsd.2020.176.

Pełny tekst źródła

Streszczenie:

AbstractThrough a strategic learning process, prototypes unveil design directions. We provide a review of prototyping methods for novice designers to study and pedagogical practice for capstone design course faculty to juxtapose. Stanford University's ME310 graduate-level project-based learning course introduces students to various prototyping design techniques, such as Needfinding and Benchmarking, and prototyping methods, such as the Critical Experience Prototype, Critical Function Prototype, Dark Horse Prototype, Part-X is Finished, Funky System Prototype, and Functional System Prototype.

Style APA, Harvard, Vancouver, ISO itp.

11

Bowen, Charles D. "Prototype Classification and User Interface Management during the Requirements Analysis Phase of System Acquistion". Proceedings of the Human Factors Society Annual Meeting 36, nr 15 (październik 1992): 1110–12. http://dx.doi.org/10.1518/107118192786749829.

Pełny tekst źródła

Streszczenie:

Much has been written about the value of prototyping during the requirements analysis phase of system acquisition. This paper focuses on the classification of prototypes as they impact the user interface. Using a style guide to manage the user interface during the prototyping process is also examined. A distinction between different categories of prototypes, can be drawn in terms of the amount of functionality provided to the user. Consequently, three distinct types of prototypes can be differentiated: conceptual, detailed design and operational prototypes. The conceptual prototype presents the user with the least amount of functionality and is often undertaken to derive functional requirements and to exhibit a proposed solution to a problem. The detailed design prototype exhibits more functionality and is often used by human factors personnel to collect detailed user feedback and performance data to make specific tradeoff decisions and to derive a more detailed design of the user interface. An operational prototype is a complete system that has been fully tested by selected end users, but is not sold as a commercial product. Once the category of prototype is established, a style guide is helpful in managing the development of the user interface. Ensuring consistency within a prototype is the principal role of a user interface style guide. Recent experience in the creation of a style guide for a prototyping effort for the US Air Force has led to a number of suggestions. These suggestions are discussed and future efforts in the development of user interface style guides is indicated.

Style APA, Harvard, Vancouver, ISO itp.

12

Su, Ching-Lung, Tse-Min Chen i Kuo-Hsuan Wu. "A Prototype-Based Gate-Level Cycle-Accurate Methodology for SoC Performance Exploration and Estimation". VLSI Design 2013 (16.05.2013): 1–10. http://dx.doi.org/10.1155/2013/529150.

Pełny tekst źródła

Streszczenie:

A prototype-based SoC performance estimation methodology was proposed for consumer electronics design. Traditionally, prototypes are usually used in system verification before SoC tapeout, which is without accurate SoC performance exploration and estimation. This paper attempted to carefully model the SoC prototype as a performance estimator and explore the environment of SoC performance. The prototype met the gate-level cycle-accurate requirement, which covered the effect of embedded processor, on-chip bus structure, IP design, embedded OS, GUI systems, and application programs. The prototype configuration, chip post-layout simulation result, and the measured parameters of SoC prototypes were merged to model a target SoC design. The system performance was examined according to the proposed estimation models, the profiling result of the application programs ported on prototypes, and the timing parameters from the post-layout simulation of the target SoC. The experimental result showed that the proposed method was accompanied with only an average of 2.08% of error for an MPEG-4 decoder SoC at simple profile level 2 specifications.

Style APA, Harvard, Vancouver, ISO itp.

13

Magee, J., J. Sidhu i R. L. Cooke. "A Prototype laser forming system". Optics and Lasers in Engineering 34, nr 4-6 (październik 2000): 339–53. http://dx.doi.org/10.1016/s0143-8166(00)00069-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Peterson, R., A. Robbi i J. Sable. "Skipper: A Prototype Expert System". IEEE Transactions on Consumer Electronics CE-31, nr 3 (sierpień 1985): 543–51. http://dx.doi.org/10.1109/tce.1985.289969.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Zhang, Xin, Wen Dong, Sihai Li, Jiancheng Luo i Tianhe Chi. "China Digital Ocean Prototype System". International Journal of Digital Earth 4, nr 3 (maj 2011): 211–22. http://dx.doi.org/10.1080/17538947.2010.512367.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Abdulhafedh, Azad. "Prototype Road Surface Management System". World Journal of Engineering and Technology 04, nr 02 (2016): 325–34. http://dx.doi.org/10.4236/wjet.2016.42033.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Nasyarudin, Achmad Faris, Ritzkal Ritzkal i Arief Goeritno. "Prototipe Perangkat untuk Pemantauan dan Pengendalian Berbasis Web Diiintegrasikan ke Smarthome System". IJEIS (Indonesian Journal of Electronics and Instrumentation Systems) 10, nr 2 (31.10.2020): 167. http://dx.doi.org/10.22146/ijeis.58316.

Pełny tekst źródła

Streszczenie:

The design and construction of a device prototype for a water level measurement system in a tank and controlling a number of garden light analogies has been carried-out and the prototype can be integrated into smarthome system. Three topics are discussed in this paper, including the manufacture, programming, and performance measurement of device prototypes. The formation of prototype of the device is done through wiring integration between electronic devices, in order to obtain the hardware handshacking. Programming the prototype of device is done through the creation of algorithms and preparation of syntax, in order to obtain the software handshacking. The performance of the prototype of device is measured when integrated into the Smarthome system, in order to obtain the hardware and software handshacking. The performance of prototype of the device when monitoring in the form of information about the water level in the water tank with 3 (three) conditions, namely the criteria of "empty", "medium", and "full", while the control in the form of information about the operation of ON/OFF of the LED as an analogy to the lamp garden are done for 3 (three) positions, namely position #1, #2, and #3. The manufactured subsystem prototype can be integrated into the smarthome system when a validation test is performed. Prototype of the device for monitoring and control based-on web that can be integrated into the smarthome system.

Style APA, Harvard, Vancouver, ISO itp.

18

Effendi, bin MOHAMAD, i ITO Teruaki. "410 Development of a prototype system for Lean Manufacturing CAI". Proceedings of Conference of Chugoku-Shikoku Branch 2012.50 (2012): 41001–2. http://dx.doi.org/10.1299/jsmecs.2012.50.41001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Harichandran, Aparna, Benny Raphael i Abhijit Mukherjee. "Development of Automated Top-Down Construction System for Low-rise Building Structures". International Journal of Industrialized Construction 1, nr 1 (14.07.2020): 22–33. http://dx.doi.org/10.29173/ijic217.

Pełny tekst źródła

Streszczenie:

Automation is the best solution for achieving high productivity and quality in the construction industry at reduced cost and time. The main objective of this study is to develop an economical automated construction system (ACS) for low-rise buildings. The incremental development of the construction system and the structural system through different versions of laboratory prototypes are described in this paper. These ACS prototypes adopt a top-down construction method. This method involves the building of the structural system step by step from the top floor to the bottom floor by connecting and lifting structural modules. ACS prototype 1 consist of wooden structural modules and electric motor system. ACS prototype 2 has a highly automated custom designed hydraulic motor system to construct steel structural frame. ACS prototype 3 is a partially automated system where the steel structural modules are connected manually. These prototypes were evaluated on the basis of function, cost and efficiency of operations. Based on overall performance, ACS prototype 3 is identified as the best economical option for the construction of low-rise buildings. When the speed of construction is more important than cost, the ACS prototype 2 is the apt solution. This paper describes the challenges in developing an ACS and the criteria to evaluate its performance. It also includes a preliminary framework for the development of an automated construction monitoring system and its experimental evaluation. This machine learning-based framework is to identify the operations of ACS from sensor measurements using Support Vector Machines. Most of the operations are identified reasonably well and the best identification accuracy is 96%. The future studies are focusing on to improve the accuracy of operation identification, further development of the monitoring system and the ACS for actual implementation in construction sites.

Style APA, Harvard, Vancouver, ISO itp.

20

Anderson, Cory, Arianna Efaw, Edward Emery, John Mueller i James Schreiner. "Next Generation Universal Ground Control System HMI Design". Industrial and Systems Engineering Review 5, nr 2 (18.12.2017): 109–15. http://dx.doi.org/10.37266/iser.2017v5i2.pp109-115.

Pełny tekst źródła

Streszczenie:

The existing Human Machine Interface (HMI) for the Army’s Universal Ground Control Station (UGCS) represents a 1980s, windows-based technology which is neither intuitive nor scalable for operators. It creates high levels of cognitive load on the operators, and its closed architecture limits its adaptability for UAS missions as technologies evolve. This research presents a methodology for creating and evaluating next generation HMI designs while leveraging GNU Image Manipulation Program (GIMP) and TELLUS flight simulation software in the creation of five HMI prototype designs. A proof of concept approach in the evaluation of prototypes was performed with five UAS Aircraft Operators (15W MOS) and five USMA cadets; examination of the impact of age and experience on the perceived value of new HMI designs will influence recommendations on full experimental design. The value-focused approach to design presented in this paper and prototype designs provide a basis for full prototype development and experimental testing through PM UAS with the Intelligence and Maneuver Centers of Excellence. Results include a trade space and sensitivity analysis towards development of improved HMI designs. The methodology and high performing prototypes for HMI design will be integrated by the PM UAS CSI Project Office for further development and full experimental analysis.

Style APA, Harvard, Vancouver, ISO itp.

21

HARYANTO, DEDY, GIARNO GIARNO, JOKO PRASETIO WITOKO, GREGORIUS BAMBANG HERU KUSNUGROHO, RAHAYU KUSUMASTUTI i MULYA JUARSA. "Karakterisasi Prototipe Heater Element System pada Untai Uji RCCS-RDNK menggunakan Kamera Infra Merah". ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika 8, nr 2 (19.05.2020): 313. http://dx.doi.org/10.26760/elkomika.v8i2.313.

Pełny tekst źródła

Streszczenie:

ABSTRAKReactor Cavity Cooling System (RCCS) adalah salah satu sistem keselamatan pada Reaktor Daya Non Komersial (RDNK). Untuk mensimulasikan keadaaan tersebut, dibuat prototype Heater Element System (HES) yang merupakan sistem pemanas listrik dan berfungsi untuk memberikan kalor pada simulator dinding RPV (wall) seperti pada acuan RPV tipe HTGR. Tujuan penelitian adalah untuk memperoleh karakteristik temperatur selama pemanasan prototype HES hingga mencapai temperature 400°C berdasarkan posisi vertikal dan horizontal HES. Metode pengamatan dilakukan dengan menggunakan kamera infra merah NEC tipe TH9100ML sebagai alat ukur temperatur dan alat visualisasi ditribusi temperatur. Hasil pengamatan menunjukkan, bahwa kehilangan kalor pada prototipe HES pada posisi vertikal lebih kecil dibandingankan pada posisi horizontal hal ini disebabkan karena luas permukaan pada posisi horizontal sebesar 7,260 cm2 lebih memungkinkan untuk kehilangan kalor lebih besar. Posisi vertikal temperatur yang dicapai pada wall prototipe HES lebih tinggi dibandingkan pada posisi horizontal.Kata Kunci: RCCS, Heater Element System, kamera infra merah, temperatur ABSTRACTReactor Cavity Cooling System (RCCS) is one of the safety systems in Non-Commercial Power Reactors (RDNK). To simulate this situation, a prototype Heater Element System (HES) was made using electric heating system as a heat sources and it serves to provide radiation heat to the RPV wall simulator as the reference of the RPV of HTGR type. The purpose of this study was to obtain the temperature characteristics during the heating of the HES prototype to reach temperatures of 400°C base on HES position, horizontal and vertical positions. The observation method was carried out using a TH9100ML infrared camera NEC type as a temperature measurement and a temperature distribution base on visualization. The observations show that the heat loss in the HES prototype in the vertical position is smaller than in the horizontal position because this is because the surface area in the horizontal position 7.260 cm2 is more likely to lose more heat. The vertical position the temperature achieved on the HES prototype wall is higher than in the horizontal position.Keywords: RCCS, Heater Element System, infrared camera, temperature

Style APA, Harvard, Vancouver, ISO itp.

22

Whang, Allen Jong-Woei, Tsai-Hsien Yang, Zhong-Hao Deng, Yi-Yung Chen, Wei-Chieh Tseng i Chun-Han Chou. "A Review of Daylighting System: For Prototype Systems Performance and Development". Energies 12, nr 15 (25.07.2019): 2863. http://dx.doi.org/10.3390/en12152863.

Pełny tekst źródła

Streszczenie:

Daylighting systems make daylight illuminance possible, and the development of prototype daylighting systems can provide more efficient daylight illuminance. The purpose of this article is to review the development and performance of prototype daylighting systems in the last decade. The passive and active daylighting systems are listed separately and divided into the four categories by the presence and absence of hybrid. Each prototype daylighting system was evaluated in terms of cost and daylight performance and as well as their novel optical design. We evaluated the architecture and daylighting principles of each system by reviewing individual prototype daylighting systems. The cost of prototype systems still poses a challenge to development. How to use passive or active systems in different environments and whether or not electrical lighting assistance is needed is a controversial issue. However, active daylighting systems equipped with solar tracking systems are still mainstream. This research is a valuable resource for daylight researchers and newcomers. It is helpful to understand the advantages of various prototype daylighting systems and commercial daylighting systems that have been developed for many years; moreover, it is also possible to know the research directions suggested by the prototype daylighting systems. These will be of further use in developing innovative and better daylighting systems and designs.

Style APA, Harvard, Vancouver, ISO itp.

23

Grundspenkis, Janis, i Alla Anohina. "Evolution of the Concept Map Based Adaptive Knowledge Assessment System: Implementation and Evaluation Results". Scientific Journal of Riga Technical University. Computer Sciences 38, nr 38 (1.01.2009): 13–24. http://dx.doi.org/10.2478/v10143-009-0001-2.

Pełny tekst źródła

Streszczenie:

Evolution of the Concept Map Based Adaptive Knowledge Assessment System: Implementation and Evaluation ResultsThe paper represents the concept map based adaptive knowledge assessment system. Advantages of concept maps are analyzed emphasizing that the approach offers a reasonable balance between requirements to assess higher levels of knowledge according to Bloom's taxonomy and complexity of a system. Concept maps allow revealing of student's knowledge structure, promote system thinking and support process oriented learning where a study course is divided into stages in each of which knowledge assessment is carried out. The developed knowledge assessment system consists from a teacher's, learner's and administrator's modules and is implemented as a multiagent system. Four prototypes of the system developed within four projects are described. The first prototype supports only fill-in-the-map tasks where a learner must put given concepts in correct places. The second prototype provides changing the degree of task difficulty, thus, performing adaptation to a learner's knowledge level. The set of tasks are also extended by construct-the-map tasks. Improvements implemented in the third prototype allow using of directed arcs and standard relationships in concept maps. The three-tier architecture used in the fourth prototype is chosen to rise the security level of the system. Besides that learner's support is considerably expanded giving help and tutoring to a learner. Results of evaluation of the developed system's prototypes in different study courses are presented. The paper concludes with the comparison of all four prototypes using all main characteristics of the developed knowledge assessment system.

Style APA, Harvard, Vancouver, ISO itp.

24

McQuerry, Meredith, Roger Barker i Emiel DenHartog. "Functional Design and Evaluation of Structural Firefighter Turnout Suits for Improved Thermal Comfort". Clothing and Textiles Research Journal 36, nr 3 (11.02.2018): 165–79. http://dx.doi.org/10.1177/0887302x18757348.

Pełny tekst źródła

Streszczenie:

Structural firefighter prototype designs incorporating ventilation, stretch, and modularity were developed following Watkins’ functional design process. Prototypes were designed and manufactured, including single-layer, vented, stretch, and combination prototypes. Prototype garments were evaluated for improved thermal comfort and heat loss using sweating thermal manikin assessments in two conditions: static (standing still with no wind) and dynamic (walking with wind). Raw thermal and evaporative resistance data from the manikin testing were input into a thermal modeling software system (RadTherm®) and physiological responses (core temperature, skin temperature, and sweat rate) were predicted for each prototype. A significant improvement in heat loss was measured when ventilation openings and modularity were added to the design of the clothing system. The single-layer, vented, and combination prototypes also had significantly lower increases in predicted physiological responses.

Style APA, Harvard, Vancouver, ISO itp.

25

Liu, Weisong, Xiang Wang, Shouzhong Zhu, Liwei Zhu i Jie Yang. "Researches on the Wideband Spectrum Sensing Prototype System Based on MWC". International Journal of Signal Processing Systems 5, nr 2 (czerwiec 2017): 70–74. http://dx.doi.org/10.18178/ijsps.5.2.70-74.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Stavrov, Vladimir, Dimitar Chakarov, Assen Shulev i Mihail Tsveov. "Mechatronic Scanning System with Integrated Micro Electro Mechanical System Position Sensors". Journal of Theoretical and Applied Mechanics 46, nr 2 (1.06.2016): 37–50. http://dx.doi.org/10.1515/jtam-2016-0009.

Pełny tekst źródła

Streszczenie:

Abstract In this paper, a study of a mechatronic scanning system for application in the microbiology, microelectronics research, chemistry, etc. is presented. Integrated silicon micro electro mechanical system (MEMS) position sensor is used for monitoring the displacement of the scanning system. The utilized silicon MEMS sensors with sidewall embedded piezoresistors possess a number of key advantages such as high sensitivity, low noise and extremely low temperature dependence. Design of 2D scanning system with a travel range of 22 × 22 μm2 has been presented in present work. This system includes a Compliant Transmission Mechanism, (CTM) designed as a complex elastic mechanism, comprising four parallelograms. Computer aided desigh (CAD) model and finite element analysis (FEA) of the Compliant Transmission Mechanism mechanisms have been carried out. A prototype of the scanning system is fabricated, based on CAD model. An experimental set-up of an optical system and a correlation technique for digital image processing have been used for testing the scanning system prototype. Results of the experimental investigations of the prototyped scanning system are also presented.

Style APA, Harvard, Vancouver, ISO itp.

27

Xie, Hua Long, Fei Li, Ning Weng i Zhong Qi Sheng. "Virtual Prototype Modeling of Biped Robot with Heterogeneous Legs". Applied Mechanics and Materials 307 (luty 2013): 117–20. http://dx.doi.org/10.4028/www.scientific.net/amm.307.117.

Pełny tekst źródła

Streszczenie:

Biped robot with heterogeneous legs (BRHL) can simulate amputees dressed with intelligent above/knee (A/K) prosthesis and can be used to evaluate intelligent prosthesis (IP) performance. First the concept of virtual prototype technology and BRHL is introduced. Then virtual prototypes of BRHL mechanical system, ground environment, perception and control system are established. In the end, the continuously walking simulation of BRHL based on virtual prototype is done. The research indicates that virtual prototype modeling based on Pro/E, ADAMS and MATLAB/Simulink is feasible.

Style APA, Harvard, Vancouver, ISO itp.

28

Lucchetti, Gino L., i Gerard A. Gray. "Technical Notes: Prototype Water Reuse System". Progressive Fish-Culturist 50, nr 1 (styczeń 1988): 46–49. http://dx.doi.org/10.1577/1548-8640(1988)050<0046:tnpwrs>2.3.co;2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Daniels, Matthew, Pezhman Ghadimi, Ivor Lanning, Cathal Heavey, Alan Ryan i Mark Southern. "An Engineering Prototype Workflow Management System". IFAC Proceedings Volumes 46, nr 9 (2013): 1471–76. http://dx.doi.org/10.3182/20130619-3-ru-3018.00428.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Skibniewski, Miroslaw J., i Jeffrey S. Russell. "Construction Robot Fleet Management System Prototype". Journal of Computing in Civil Engineering 5, nr 4 (październik 1991): 444–63. http://dx.doi.org/10.1061/(asce)0887-3801(1991)5:4(444).

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Liu, Xicheng, i Timothy J. Li. "Implementation of a prototype VoIP system". Journal of Computer Science and Technology 15, nr 5 (wrzesień 2000): 480–84. http://dx.doi.org/10.1007/bf02950412.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Gonçalves, B., J. Sousa, B. B. Carvalho, A. P. Rodrigues, M. Correia, A. Batista, J. Vega i in. "ITER prototype fast plant system controller". Fusion Engineering and Design 86, nr 6-8 (październik 2011): 556–60. http://dx.doi.org/10.1016/j.fusengdes.2011.04.062.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Werner, M., M. Ivanenko, M. Klasing i P. Hering. "Prototype CO2 laser system for osteotomy". Journal of Biomechanics 39 (styczeń 2006): S209. http://dx.doi.org/10.1016/s0021-9290(06)83762-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Cupello, James M., i David J. Mishelevich. "Managing prototype knowledge/expert system projects". Communications of the ACM 31, nr 5 (maj 1988): 534–50. http://dx.doi.org/10.1145/42411.42416.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Catarci, Tiziana, i Giuseppe Santucci. "The prototype of the DARE system". ACM SIGMOD Record 30, nr 2 (czerwiec 2001): 609. http://dx.doi.org/10.1145/376284.375771.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Hickey, Thomas B., i Andrew M. Calabrese. "Electronic Document Delivery: OCLC's Prototype System". Library Hi Tech 4, nr 1 (styczeń 1986): 65–71. http://dx.doi.org/10.1108/eb047635.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Ulrich, Thomas A., Roger Lew, Ronald L. Boring i Ken Thomas. "A Computerized Operator Support System Prototype". Proceedings of the Human Factors and Ergonomics Society Annual Meeting 58, nr 1 (wrzesień 2014): 1899–903. http://dx.doi.org/10.1177/1541931214581397.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Kozachok, A. V., i E. V. Kochetkov. "Verified program code execution system prototype". Proceedings of the Institute for System Programming of the RAS 29, nr 6 (2017): 7–24. http://dx.doi.org/10.15514/ispras-2017-29(6)-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Moores, B. M., T. Dovas, B. Pullan i R. Booler. "A prototype digital ionographic imaging system". Physics in Medicine and Biology 30, nr 1 (1.01.1985): 11–20. http://dx.doi.org/10.1088/0031-9155/30/1/002.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Meng, J. S., i J. E. Aldrich. "A prototype computerized ultrasound thermography system". International Journal of Radiation Oncology*Biology*Physics 19 (styczeń 1990): 270. http://dx.doi.org/10.1016/0360-3016(90)90931-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Wisswani, N. W., i I. G. N. B. Catur Bawa. "Web-Based Honorarium Confirmation System Prototype". Journal of Physics: Conference Series 953 (styczeń 2018): 012051. http://dx.doi.org/10.1088/1742-6596/953/1/012051.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Doradla, Pallavi, Karim Alavi, Cecil Joseph i Robert Giles. "Single-channel prototype terahertz endoscopic system". Journal of Biomedical Optics 19, nr 8 (11.08.2014): 080501. http://dx.doi.org/10.1117/1.jbo.19.8.080501.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Karwati, K., i J. Kustija. "Prototype of Water Level Control System". IOP Conference Series: Materials Science and Engineering 384 (lipiec 2018): 012032. http://dx.doi.org/10.1088/1757-899x/384/1/012032.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Mulyana, Y., i D. L. Hakim. "Prototype of Water Turbidity Monitoring System". IOP Conference Series: Materials Science and Engineering 384 (lipiec 2018): 012052. http://dx.doi.org/10.1088/1757-899x/384/1/012052.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Al-Ghassani, Ahmed M., John M. Kamara, Chimay J. Anumba i Patricia M. Carrillo. "Prototype System for Knowledge Problem Definition". Journal of Construction Engineering and Management 132, nr 5 (maj 2006): 516–24. http://dx.doi.org/10.1061/(asce)0733-9364(2006)132:5(516).

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Dabke, K. P., K. M. Thomas i V. Shams. "EELIAS—A Prototype Library Expert System". Australian Academic & Research Libraries 22, nr 2 (styczeń 1991): 88–95. http://dx.doi.org/10.1080/00048623.1991.10754721.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Kovalerchuk, Boris, James Ruiz, Evgenii Vityaev i Steven Fisher. "Prototype internet consultation system for radiologists". Journal of Digital Imaging 11, S1 (sierpień 1998): 22–26. http://dx.doi.org/10.1007/bf03168252.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Song, Jeong-Hoon. "Development of a Prototype New Electric Power Steering (EPS) System". Transactions of the Korean Society of Mechanical Engineers A 30, nr 6 (1.06.2006): 684–90. http://dx.doi.org/10.3795/ksme-a.2006.30.6.684.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Backes, Paul G., John Beahan, Mark K. Long, Robert D. Steele, Bruce Bon i Wayne Zimmerman. "A prototype ground-remote telerobot control system". Robotica 12, nr 6 (listopad 1994): 481–90. http://dx.doi.org/10.1017/s0263574700016829.

Pełny tekst źródła

Streszczenie:

SummaryA local-remote telerobot control system is described which is being developed for time-delayed groundremote control of space telerobotic systems. The system includes a local site operator interface for interactive command building and sequencing for supervised autonomy and a remote site: the Modular Telerobot Task Execution System (MOTES), to provide the remote site task execution capability. The local site system also provides stereo graphics overlay on video with interactive update of the remote environmental model. The operator selects objects in the environment to interact with and skill types to specify the tasks to be performed, such as grasping a module or opening a door.

Style APA, Harvard, Vancouver, ISO itp.

50

Prasetyo, T. F., D. Zaliluddin i M. Iqbal. "Prototype of smart office system using based security system". Journal of Physics: Conference Series 1013 (maj 2018): 012189. http://dx.doi.org/10.1088/1742-6596/1013/1/012189.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!