Rozprawy doktorskie na temat „Projectors”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Projectors”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Yu, Xing Jie. "Optical components for LCOS projectors /". View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202004%20YU.
Pełny tekst źródłaNysjö, Fredrik. "Rendering Software for Multiple Projectors". Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-161644.
Pełny tekst źródłaXu, Jia. "Subgradient projectors : theory, extensions and algorithms". Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57955.
Pełny tekst źródłaIrving K. Barber School of Arts and Sciences (Okanagan)
Mathematics, Department of (Okanagan)
Graduate
Kaczorowski, Andrzej. "Adaptive aberration correction for holographic projectors". Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/270322.
Pełny tekst źródłaSummet, Jay W. "Virtual Rear Projection: Improving the User Experience with Multiple Redundant Projectors". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19737.
Pełny tekst źródłaCommittee Co-Chair: Abowd, Gregoy D.; Committee Co-Chair: Rehg, James M.; Committee Member: Corso, Gregoy M.; Committee Member: Mynatt, Elizabeth; Committee Member: Pierce, Jeffrey S.; Committee Member: Pinhanez, Claudio.
Zekonyte, Kristina. "Projectors in seventeenth century England and their relevance to the field of project management". Thesis, University of Brighton, 2018. https://research.brighton.ac.uk/en/studentTheses/b5d4ae88-7cef-4d52-9cf7-dacb0485f418.
Pełny tekst źródłaWillis, Karl D. D. "Ubiquitous Projection: New Interfaces using Mobile Projectors". Research Showcase @ CMU, 2013. http://repository.cmu.edu/dissertations/216.
Pełny tekst źródłaHartrick, Elizabeth. "Consuming illusions : the magic lantern in Australia and Aotearoa/New Zealand 1850-1910 /". Connect to thesis, 2003. http://eprints.unimelb.edu.au/archive/00002203.
Pełny tekst źródłaLeung, Kit Yee. "Single-panel sequential-color LCOS projectors using LED lamps /". View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?ECED%202008%20LEUNG.
Pełny tekst źródłaChan, Hoi Chun. "Hand held and wireless micro projector /". View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20CHAN.
Pełny tekst źródłaAndersson, Carl. "Seamless Automatic Projector Calibration of Large Immersive Displays using Gray Code". Thesis, Uppsala universitet, Avdelningen för visuell information och interaktion, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-207956.
Pełny tekst źródłaLi, Shuo. "Multiple-LED color-sequential liquid crystal on silicon projector /". View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?ECED%202008%20LIS.
Pełny tekst źródłaBennett, Marissa A. "Improving Model Performance with Robust PCA". Digital WPI, 2020. https://digitalcommons.wpi.edu/etd-theses/1366.
Pełny tekst źródłaButler, Eliza A. "Making argument visible the magic lantern shows of Jacob A. Riis /". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 63 p, 2008. http://proquest.umi.com/pqdweb?did=1597631581&sid=33&Fmt=2&clientId=8331&RQT=309&VName=PQD.
Pełny tekst źródłaPombo, Mauro Ricardo Vilhena. "Sistemas de gestão de projectos e serviços: estudo de caso". Master's thesis, Escola Superior de Ciências Empresariais, 2013. http://hdl.handle.net/10400.26/5121.
Pełny tekst źródłaO mundo empresarial está cada vez mais competitivo, as empresas enfrentam uma mudança cada vez mais rápida em termos de mercados, tecnologias e produtos/serviços. As empresas procuram a todo o momento preencher lacunas entre o planeamento e a execução dos projectos. Para tal, procuram apoiar-se em ferramentas que auxiliem a gestão de projectos. Os sistemas de gestão de projectos de engenharia possibilitam a optimização e sistematização das tarefas durante a execução do projecto. Estes proporcionam uma gestão mais eficiente, maior capacidade para armazenamento e tratamento de informação e maior organização. Procurei analisar algumas das soluções de sistemas de gestão de projectos de engenharia e aferir quanto às vantagens destes sistemas nas PME’s (Pequenas e Médias Empresas).
The business world is increasingly competitive, companies face an increasingly rapid change in terms of markets, technologies and products/services. Companies seek at all times to fill gaps between projects planning and implementation. To this end, they seek to rely on tools that help manage projects. Engineering projects management systems enable the optimization and systematization of tasks during the project implementation. These provide more efficient, higher capacity storage and processing of information and greater organization. I tried to analyze some of the solutions of engineering project management systems and benchmark as to the advantages of these systems in SME’s (Small and Medium Enterprises).
Hizli, Cem. "Thermal Optimization of Veo+ Projectors (thesis work at Optea AB) : Trying to reduce noise of the Veo+ projector by DOE (Design of Experiment) tests to find anoptimal solution for the fan algorithm while considering the thermal specifics of the unit". Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10382.
Pełny tekst źródłaRoberts, Rebecca J. "'Two meane fellows grand projectors' : the self-projection of Sir Arthur Ingram and Lionel Cranfield, Earl of Middlesex, 1600-1645, with particular reference to their houses". Thesis, Teesside University, 2012. http://hdl.handle.net/10149/254593.
Pełny tekst źródłaMögel, Jens. "Virtual Reality und Augmented Reality als Werkzeug in der Aufstellplanung". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-215197.
Pełny tekst źródłaMadureira, Margarida Paulos e. Cruz. "Mega-projectos e transição agrária : o caso do projecto WANBAO (Moçambique)". Master's thesis, Instituto Superior de Economia e Gestão, 2013. http://hdl.handle.net/10400.5/11400.
Pełny tekst źródłaEsta dissertação aborda o fenómeno de land grabbing - investimentos de grande escala em terrenos agrícolas em países em desenvolvimento - como uma forma específica assumida pelo processo de transição agrária no contexto destes países no início do séc. XXI. Para tal, toma como estudo de caso o projecto Wanbao, em Xai-Xai (província de Gaza, Moçambique). Trata-se de um projecto que pretende aumentar a produtividade agrícola, nomeadamente na produção de arroz, e que assenta numa parceria entre a empresa chinesa Wanbao e a empresa pública moçambicana Regadio do Baixo Limpopo. A implementação do projecto implica a concessão de 20 mil hectares de terrenos no Regadio do Baixo Limpopo e a expropriação de milhares de camponeses que dependiam destes terrenos para a sua subsistência. O trabalho de campo foi realizado em Junho de 2013 e incluiu a realização de 24 entrevistas, em Xai-Xai e Maputo, com responsáveis do projecto, representantes de entidades oficiais moçambicanas e de organizações da sociedade civil e diversos camponeses afectados. Conclui-se que o projecto Wanbao está a implicar uma transformação profunda das estruturas sociais na região, a qual pode ser interpretada proveitosamente à luz da bibliografia histórica e teórica sobre a transição agrária correspondente à penetração das lógicas mercantis e capitalistas, na medida em que incorpora todos os elementos dessa transição: expropriação, concentração da propriedade e (semi-proletarização).
This dissertation addresses the phenomenon of land grabbing - large scale investments in agriculture in developing countries - as a particular form taken by the process of agrarian transition in the context of these countries in the beginning of the 21st Century. For this purpose, the Wanbao project in Xai-Xai (Gaza province, Mozambique) is used as a case study. The Wanbao project aims at increasing agricultural productivity, namely in rice production, and it builds on a partnership between the Chinese private company Wanbao and the Mozambican state company Regadio do Baixo Limpopo. The implementation of the project implies both the concession of 20 thousand hectares in the Regadio do Baixo Limpopo area and the expropriation of thousands of peasants who relied on these lands for their subsistence. Fieldwork was undertaken in June 2013 and included 24 interviews, in Xai-Xai and Maputo, with project managers, representatives of the Mozambican authorities and civil society organizations, as well as several affected peasants. We conclude that the Wanbao project is bringing about a profound transformation of the region?s social structures which can be usefully interpreted under the light of the historical and theoretical literature on the agrarian transition corresponding to the penetration of mercantile and capitalist logics insofar as this process exhibits all the elements of that transition: expropriation; consolidation of land holdings; and (semi-proletarianization).
Sousa, Ana Filipa Martins de. "Gestão ágil de projectos multimédia: o caso do projecto Sapo Campus". Master's thesis, Universidade de Aveiro, 2010. http://hdl.handle.net/10773/3708.
Pełny tekst źródłaPerante a mudança revolucionária nos estilos de desenvolvimento de novos produtos e a crescente substituição das metodologias tradicionais por metodologias ágeis, surge com a presente investigação um espaço e tempo para compreender a adequação da gestão ágil de projectos ao cenário do desenvolvimento de produtos multimédia. Esta investigação foi sustentada por um estudo de caso focado num cenário académico, o Laboratório SAPO/UA, mais concretamente no projecto SAPO Campus. A dinâmica de funcionamento deste cenário, presentemente debilitada quanto a processos e práticas de gestão, foi analisada com vista à posterior elaboração de um modelo ágil de gestão de projectos. O modelo concebido foi implementado num grupo restrito de membros da equipa de projecto e posteriormente validado. Como resultado, espera-se uma melhoria efectiva do funcionamento do projecto, bem como uma reunião de argumentos que fortifiquem uma perspectiva clara acerca da adaptação da gestão ágil de projectos ao cenário da produção multimédia.
Given the revolutionary change in the styles of new product development and the increasing replacement of traditional methodologies for agile methodologies, this research comes up with a space and time to understand the suitability of agile project management to the scenario of the development of multimedia products. This investigation was supported by a case study focused on an academic scenario, the Laboratory SAPO/UA, specifically in the SAPO Campus project. The working dynamics of this context, currently depleted in management processes and practices, was analyzed to further develop of an agile project management model. The designed model was implemented in a small group of members of project team and subsequently validated. As a result, we expect a real improvement of the project as well as a gathering of arguments that strengthen a clear perspective on the adaptation of agile project management to the context of multimedia production.
Castro, Pedro Fragoso Machado. "Uma experiência prática em projecto de arquitectura na PROAP: estudos e projectos de arquitectura paisagista". Master's thesis, Universidade de Évora, 2014. http://hdl.handle.net/10174/13389.
Pełny tekst źródłaGraça, Ana Luísa Gomes dos Santos. "Projectar com o lugar: sustentabilidade patrimonial : projecto de reabilitação para a Quinta dos Alfinetes". Master's thesis, Univerdidade de Lisboa. Faculdade de Arquitetura, 2014. http://hdl.handle.net/10400.5/7756.
Pełny tekst źródłaA presente dissertação tem como objectivo a compreensão do acto de Projecto em perfeita sintonia com o Lugar, físico e cultural, da Quinta dos Alfinetes, localizado em Marvila, na cidade de Lisboa. Uma Quinta de Recreio devoluta e expectante, onde se pretende realizar uma intervenção que suporte o conceito de Sustentabilidade Patrimonial, recuperação e património – numa simbiose entre o novo e o velho. Aliado a este, surge o conceito de Educação Ambiental, que se destaca pelos seus objectivos de consciencialização do Homem pela preservação do meio ambiente, na sua utilização de forma sustentável e no incentivo de concretizações arquitectónicas conscientes do seu meio. A partir de uma análise histórica, tipológica e de vários casos de estudo, obtivemos os elementos-chave para a realização da nossa proposta de recuperação da Quinta dos Alfinetes: a implementação de um programa ligado às raízes tipológicas da propriedade original (de carácter recreativo e de produção agrícola), a educação para o ambiente, e a comercialização da sua produção como meio de subsistência da propriedade. Surge assim o Centro de Educação Ambiental de Marvila, um programa já bastante disseminado nacionalmente e que achamos servirá a necessidade futura da freguesia, pela sua vertente comunitária, na criação de hortas urbanas que apoiem a população maioritariamente desempregada e de baixa escolaridade. A proposta arquitectónica tem uma abordagem de enfatização do objecto principal existente e os seus componentes principais da tipologia da Quinta de Recreio e a sua adaptação a uma estrutura arquitectónica nova, que se pretende una e indissociável.
ABSTRACT: This dissertation aims at the understanding of the act of planning in perfect harmony with the physical and cultural place of Alfinetes Villa, located in Marvila, in the city of Lisbon. A Leisure Villa vacant and expectant, where we intend to carry out an intervention that supports the concept of Sustainable Heritage, recovering de heritage – a symbiosis between the new and the old. Allied to this, the concept of Environmental Education, which stands out by for its goals to raise awareness for the preservation of the human environment, its sustainable use, and its use of sustainably and in encouraging architectural achievements that are aware of their environment. From a historical and typological analysis of several case studies, we obtained the key elements for the realization of our proposed recovery of Alfinetes Villa: the implementation of a program linked to the typological roots of the original property (recreational and agricultural production), environmental education, and the marketing of their production for their livelihoods property. So it arises the Environmental Educational Center of Marvila, a program already quite widespread nationally and that we will serve the future needs of the town, for its community dimension, the creation of urban gardens that support mostly unemployed and low education population. In terms of architectural proposal, is intended an approach of emphasizing the existing main purpose and the main components of the typology of the Leisure Villa and its adaptation to a new architectural structure, intended to be one and inseparable.
Osipova, Ekaterina. "On enhancing joint risk management throughout a project's lifecycle : Empirical studies of Swedish construction projects". Doctoral thesis, Luleå tekniska universitet, Byggkonstruktion och -produktion, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25895.
Pełny tekst źródłaGodkänd; 2013; 20131205 (ekaosi); Tillkännagivande disputation 2014-01-07 Nedanstående person kommer att disputera för avläggande av teknologie doktorsexamen. Namn: Ekaterina Osipova Ämne: Byggproduktion/Construction Engineering Avhandling: On enhancing joint risk management throughout a project's lifecycle: Empirical studies of Swedish construction projects Opponent: Professor Stuart Green, Head of School of Construction Management and Engineering, University of Reading, UK Ordförande: Biträdande professor Per-Erik Eriksson, Institutionen för ekonomi, teknik och samhälle, Luleå tekniska universitet Tid: Fredag den 7 februari 2014, kl 10.00 Plats: F1031, Luleå tekniska universitet
Systematisk gemensam riskhantering i byggprojekt
Ramos, Elena Garcia. "Investigations of chiral symmetry breaking and topological aspects of lattice QCD". Doctoral thesis, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät I, 2014. http://dx.doi.org/10.18452/16890.
Pełny tekst źródłaThe spontaneous breaking of chiral symmetry is a fascinating phenomenon of QCD whose mechanism is still not well understood and it has fundamental phenomenological implications. It is, for instance, responsible for the low mass of the pions which are effectively Goldstone bosons of the spontaneously broken symmetry. Since these phenomena belong to the low energy regime of QCD, non-perturbative techniques have to be applied in order to study them. In this work we use the twisted mass lattice QCD regularization to compute the chiral condensate, the order parameter of spontaneous chiral symmetry breaking. To this end we apply the recently introduced method of spectral projectors which allows us to perform calculations in large volumes due to its inherently low computational cost. This approach, moreover, enables a direct calculation of the chiral condensate based on a theoretically clean definition of the observable via density chains. We thus present a continuum limit determination of the chirally extrapolated condensate for N_f=2 and N_f=2+1+1 flavours of twisted mass fermions at maximal twist. In addition we study the chiral behavior of the topological susceptibility, a measure of the topological fluctuations of the gauge fields. We again apply the spectral projector method for this calculation. We comment on the difficulties which appear in the calculation of this observable due to the large autocorrelations involved. Finally we present the continuum limit result of the topological susceptibility in the pure gluonic theory which allows us to perform a test of the Witten-Veneziano relation. We found that this relation is well satisfied. Our results support the validity of the Witten-Veneziano formula which relates the topological fluctuations of the gauge fields with the unexpectedly large value of the eta''
Alves, Lina Beatriz Pires. "Mulheres e Tatuagens: construção de identidades". Master's thesis, Instituto Superior de Ciências Sociais e Políticas, 2017. http://hdl.handle.net/10400.5/15064.
Pełny tekst źródłaNas sociedades ocidentais, os assuntos corporais têm sido motivo de interesse e investigação sobretudo a partir da década de 1980. O corpo tende a tornar-se uma matéria prima pronta a moldar, uma construção pessoal elaborada pelo sujeito que o transforma. Associada a essa construção estão diversas modificações corporais, como as tatuagens. As tatuagens sofreram uma renovação a nível gráfico, simbólico e social conduzindo a uma padronização do universo das modificações corporais e ao surgimento de novas práticas de consumo. Tanto homens como mulheres foram sendo cada vez mais atraídos para inscreverem tatuagens nas suas peles, à medida que a sua associação às dissidências sociais se foi diluindo e surgiram novos significados. Numa sociedade de consumo com regras de comportamento rígidas, os sujeitos são encorajados a seguirem determinados projectos corporais pré-definidos. Por isso, quando falamos em tatuagens extensas estamos a falar de práticas desviantes a esses padrões previamente definidos. No entanto, as mulheres parecem esquecidas como participantes nesta prática, especialmente se estivermos a falar de corpos femininos extensamente tatuados, constituindo desse modo um fenómeno silencioso numa sociedade de consumo com regras de comportamento feminino rígidas. O cenário apresentado torna pertinente o estudo acerca deste fenómeno, de forma a contribuir para suscitar, à sua escala, mais interesse académico a nível nacional. O presente trabalho pretende interrogar-se sobre o papel que as tatuagens têm na construção das identidades femininas. Propondo-se a responder aos objectivos: identificar os motivos que levam as mulheres a tatuar os seus corpos; caracterizar a importância e visibilidade destas modificações corporais nas suas vidas; descrever os seus contextos sociais, profissionais e familiares. Com uma metodologia assente nos procedimentos qualitativos, com recurso às técnicas da entrevista semi-estruturada a mulheres com tatuagens extensivas pelo corpo em zonas visíveis, ou seja, tatuagens onde a exposição pública é mais difícil de camuflar. Estas mulheres quando se tatuam extensivamente ganham novos projectos corporais que não se encontram registados na sociedade. As tatuagens são assim uma representação do eu, uma exteriorização de um self planeado tendo em conta as pressões sociais e os problemas que daí podem advir. As modificações corporais mudam a imagem que as mulheres têm do seu corpo e a auto-estima aumenta. Prevalece a vontade de continuar o projecto e resistir às normas de comportamento e beleza ocidentais.
In the western societies, there has been a lot of investigation around the body since 1980. The body as a whole concept tends to become a resource that can be worked upon at the will of the individual, and one of the common ways to change the body aspect is through tattoos. Tattoos suffered a big transformation in their graphics, social and symbolical design in the last decades of the twentieth century, which contributed to the standardization of the changes that can be made to the human body. Men and Women were slowly but surely attracted by the general idea of getting tattoos, and as these were spreading throughout the different social classes they earned new insightful meanings. In a consumerist society with strict rules when it comes to behavior, individuals are forced to follow standardized body projects. Furthermore, when we speak about heavily tattooed bodies, we can acknowledge that these individuals deviate from the previously determined standards. And if we focus on women, these almost seem forgotten about their tattoos, especially the heavily tattooed bodies create a silent social phenomenon within the same consumerists societies. This scenario makes the study of the phenomenon a useful and prolific way of understanding tattoos in a social context, and possibly generate more interest surrounding this subject. Our work tries to identify the role of tattoos in the foundations of the female identity. Our objective consist of: identifying the reasons that take women to get tattoos, understanding the importance and visibility of these body changes and their social, professional and personal context. Using a methodology based on qualitative procedures, with a special focus on data recovered from in-depht interviews to women who have highly visible tattoos that are hard to hide in a public scenario. Our findings revealed that women with an overwhelming number of tattoos, have gained new body projects that are not contained inside the norms of society. Tattoos are a clear representation of the "I", as well as a way to show the criteria in which the "Self" can express itself, showing a disdain towards the social pressure. These body changes create an image that each individual wants of his own body and also raises their self-esteem as a result of set changes. Ultimately the will of pursuing each personal projects prevails over any behavior or beauty standards.
N/A
Passi, Emilio C. "Bloom's taxonomy agent /". View online record:, 2000. http://srproj.lib.calpoly.edu/projects/csc/Passi%5FEmilio/.
Pełny tekst źródłaNovak, Matthew Wayne. "T.S. Eliot criticism a dynamic Web interface /". View online record:, 2000. http://srproj.lib.calpoly.edu/projects/engl/Novak%5FMatthew.
Pełny tekst źródłaBergamini, Jeffrey Albert. "Virterrain 3D visual earth environment simulation /". View Senior Project online:, 2003. http://srproj.lib.calpoly.edu/projects/CSC/bbergamini.
Pełny tekst źródłaPratt, Stephen Wells. "The design and implementations of a push down automaton simulator senior project /". Download online PDASimulator Zip file, 2004. http://srproj.lib.calpoly.edu/projects/csc/spratt/.
Pełny tekst źródłaAraújo, Ricardo Miguel Lavado. "Análise de requisitos para aprovação de projectos de investigação na área de sistemas de informação". Master's thesis, Instituto Superior de Economia e Gestão, 2011. http://hdl.handle.net/10400.5/10204.
Pełny tekst źródłaOs projectos de investigação são um dos principais veículos de investigação em todo o mundo. Em Portugal é da competência da Fundação para a Ciência e a Tecnologia (FCT) a abertura periódica de concursos públicos para financiamento de projectos de investigação nas diversas áreas do domínio científico. Os projectos da área de Sistemas de Informação (SI) estão enquadrados dentro do domínio da gestão e apresentam uma taxa de aprovação abaixo da média. A presente investigação procura analisar como é que os projectos de investigação da área de SI a concurso na FCT, contemplam os diversos critérios de avaliação. Desta forma, o objectivo principal da investigação passa por uma análise dos projectos de investigação da área de SI a concurso na FCT, segundo um conjunto de dezassete critérios de avaliação para projectos de investigação, criado a partir da análise da literatura. A abordagem metodológica usada nesta investigação é qualitativa, pois "implica uma ênfase nos processos e significados" (Garcia e Quek, 1997, p.451). Desta forma é efectuado um estudo de caso exploratório, tendo como base os projectos de investigação de SI que se candidataram ao apoio da FCT, através dos concursos em todos os domínios científicos, 2004, 2006 e 2008. Ao nível dos resultados finais e no que concerne aos perfis dos sete projectos aprovados, seria de esperar um preenchimento mais completo dos vários critérios de avaliação. Noutro prisma é possível perceber a subjectividade que os diversos critérios de avaliação possuem, dando uma ênfase maior às capacidades e conhecimentos de cada avaliador.
The research projects are one of the main investigation vehicles all over the world. In Portugal the Foundation for Science and Technology (FCT) is responsible for periodically opening public calls for funding research projects in the science domain areas. The Information Systems (IS) projects are framed in the management area and represent an approval rate below the average. The following investigation try's to analyse how the research projects in the IS area, running in a FCT call, contemplate the various evaluation criteria. This way, the principal objective of the investigation goes through analyzing the research projects on the IS area running in a FCT call, through a set of seventeen evaluation criteria for research projects, created on the literature review. The methodological approach used in this investigation is qualitative, because it "implicates an emphasis in the processes and meanings" (Garcia e Quek, 1997, p.451). This way, it's effectuated an exploratory case study, having has base the IS research projects that runned for the FCT support, through the calls on all the scientific domains in 2004, 2006 and 2008. At the final results level it's possible to analyse the profiles of the seven approved projects, we should expect a more complete filling of the various evaluation criteria In another prism, it's possible to understand the subjectivity that the diverse criteria's of evaluation have, giving more emphasis to the capacities and knowledge of each evaluator.
Huang, Kuan-Chun, i 黃冠鈞. "Auto-calibration multi-projectors system". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/41474719468820181487.
Pełny tekst źródła國立中興大學
電機工程學系所
98
The correlative applications are proposed increasingly with the improved technique of projector manufacture. The projectors can not only provide functions of flat panel display, but also create special visual effect, for instances movie theaters, 3D projection, surrounding display, projection performance, and visual reality, which are hardly implemented by flat panel displays. However, this kind of applications depends on high-level projectors. Gradually, the researches about multi-projectors system are taken seriously therefore. First, the conventional multi-projectors system are discussed in the chapter one of this study, some of them makes the projections side by side through regulating the placements of projectors; others feedback the position of projectors by using a high-resolution camera. However, these two common methods have their own advantages and defects. Hence, an Auto-Calibration Multi-projectors System aimed to the situation above is provided in this paper. When combining the projections of multi-projectors, brighter regions are usually appearing due to the overlaps of projections, and the projections are distorted by the keystone effect because of improper projector placements. Consequently, after building the system structure, to ensure the final combined projection is smooth and continuous for vision, the edge blending technique for removing the brighter regions and homography matrix in order to calibrate the distortion of projection are introduced in the chapter two. After simply understanding the two techniques, the chapter three first proposes the system flow of the Auto-Calibration Multi-projectors System and deeply expatiates on the principles and theories mentioned in chapter two. Nevertheless, the brighter region turns into darker contrarily if the original edge blending technique is applied directly to the projection overlap. Therefore, a webcam is used to observe the properties between projectors and build a corrected edge blending weighting table. On the other hand, the pre-calibrated images are obtained by utilizing modified homography matrix according to distortion of each projector fedback from the webcam. To further improve the accuracy of projection combination, a projection test pattern is adopted to enhance the relative resolution and avoid using the unideal part of webcam image. The chapter four provides experiments to prove the techniques mentioned in chapter three. The first experiment is single projection calibration which makes sure the homography matrix obtained from webcam calibrates the projection correctly; next, edge blending weighting tables are built from the properties between projectors, and then put the tables into test; the third experiment applies the result of the former two to 2×2 multi-projectors and checks the exactitude of outcomes; finally, in order to improve the convenience of the system, webcam calibration is proposed and calibrates the distortion due to improper webcam placement. The chapter five concludes each experiment and proffers solutions. Expect the achievements of this paper can implement a low-cost and simple Auto-Calibration Multi-Projectors System to advance the practicability of projectors
CHEN, FANG-TIEN, i 陳芳鈿. "Automatic color matching for tiled multiple projectors". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/27444905222479912182.
Pełny tekst źródła國立中央大學
資訊工程學系碩士在職專班
94
To produce a large screen, one economical way is using multiple projectors to tile. However, each projector has its individual luminance and color characteristics due to different electronic components and light bulbs. The tiled screen then appears the non-uniform color and luminance and has blocking effect. In this study, we use a camera to capture the tiled screen, and propose two automatic calibration methods to resolve the non-uniform color and luminance problems. At last, we generate the feedback control signal to the multiple projectors through the RS-232 port to automatically adjust the projectors. The first method is gamma curve adjusting method, it uses lowest lightness projector to produce known gamma lookup table, and then use this table to individually adjust the gamma curve of each projector; the second method is color coordinate adjusting method, it adjusts color coordinate of primary color of each projector directly. The first method needs to adjust every step of gamma lookup table, it seems hard; the second method needs to use integrated circuit built-in feature, the portability is not so good. Each method has both advantages and disadvantages. Users need to decide what method will be adopted by their application.
Ko, Tung-Yi, i 柯東杙. "Air inlets and outlets of LED micro projectors". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/60617298632991750618.
Pełny tekst źródła國立交通大學
工學院精密與自動化工程學程
105
Even though the market for projectors is dominated by corporate customers, it has recently expanded to include household customers. Moreover, because of continued advances in integrated circuits and semiconductor technologies, miniaturized electronic components and projection technologies have enabled the growing use of micro projectors. This study investigated heat-transfer designs for the air inlets and outlets of light-emitting diode micro projectors. Specifically, this study explored how to ensure the optimal air flow rates for inlets and outlets under forced convection generated by a built-in fan, identify the optimal positions for the inlets and outlets, and allow hot air to be removed efficiently from projectors. A portable electronic micro projector was used. This projector contained lithium batteries; aperture criteria for inlets and outlets were specified to satisfy the aperture requirements of the case. The heat-transfer design method and procedure demonstrated in this study can be used to improve the heat transfer characteristics of micro projectors, to reduce the cost of their development, and to simplify and expedite their development.
劉家倫. "Improment of falling damage resistance of pico- projectors". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/82176619152650892710.
Pełny tekst źródła國立交通大學
工學院精密與自動化工程學程
100
The projector industry is now developing towards lightness and portability; with the current commercialization, its product bulk is almost that of a mobile phone. But since it is easy to carry, projectors are often dropped due to carelessness; the most common defects are cracking and breakage to the cover. The subjects of study in this paper were commercialized pico-projectors. They were tested according to CNS drop test specifications to verify whether the design of its cover could withstand breakage inadvertently caused by users dropping the product. This study aimed to further explore this phenomenon and analyze the possible causes for cover defects. Strengthening began from the design end, while computer-aided engineering software simulation was used to confirm the results. Then a drop test was performed with actual products on the market, the results of which were finally compared with the computer simulation analysis results. Two methods for improvement were discovered; changing the cover material to a material with better rupture strength properties, and re-designing its structure for increased strength. The results and experience gained may be used as feedback in the design guidelines for product development, thus enhancing overall product quality further.
WU-SHIH-MIN i 吳世民. "Throughput Analysis of Light Valve Projectors Using Etendue Method". Thesis, 2000. http://ndltd.ncl.edu.tw/handle/15373433135392743774.
Pełny tekst źródła國立臺灣科技大學
電子工程系
88
When one estimates the throughput of the light valve LCD projectors prior to constructing prototype, the efficiency for each component in the LCD projector is specified. However, efficiency for the lamp-reflector combination is lacking, which in fact is among the most important factors to estimate the efficiency of the light valves projector. It is crucial because it represents how many lumens are coupled into the systems that are collected by the reflector. This factor varies, depending on how the system is designed. It is also related to the size of the source, the area of the aperture stop of the system, and the F/# of the system. Those geometry parameters influence a quantity we call it Etendue, which is a French word means ''optical extent'' or ''optical invariant''. Adopting Etendue concept, the system designer will be able to estimate the throughput of the light valve projectors completely. In this paper, we will provide an innovative method estimate efficiency via the use of the collected lumens from the source-reflector combination, based upon the Etendue concept.
YUWEN, TSAI, i 蔡譽文. "Numerical Analysis using in Heat Transfer of Pico Projectors". Thesis, 2018. http://ndltd.ncl.edu.tw/handle/y6jynv.
Pełny tekst źródłaChen, Heng-che, i 陳亨哲. "Innovative Light Guide Design of Illumination System in LED Projectors". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/xdg496.
Pełny tekst źródła國立臺灣科技大學
電子工程系
94
In view of the fact that LED projectors use only three primary RGB colors, while suffered from the shortcoming of low output flux and troublesome cooling system design. We therefore, in this paper add another cyan color spectrum LED to make picture more colorful and brighter in order to extend color gamut and increase output flux as well. Besides, nowadays many researches discussing LED illumination projection system are focused on no more than mixing three colors, to have uniform effect with light guide. An optical component X-cube is then used to get mixing effect by stacking three colors. But these constructures are still too big and the cooling system can be very complicated. Therefore, we design an innovative illumination system in this paper, it is not only achieving same effect and is even richer in color. The total volume is only 95 and the cooling system becomes simpler. We used Lumileds series LED to design the illumination system. We calculated the positions and specification of the interior reflective parts in the light guide, according to the geometrical optics. Finally, we confirmed results using TracePro software and performed to analyze.
Si-Xian, Li, i 李思賢. "High Power LED Illumination System for Pocket-Sized DLP Projectors". Thesis, 2007. http://ndltd.ncl.edu.tw/handle/38269716821154756822.
Pełny tekst źródła國立高雄第一科技大學
工程科技研究所
95
Typical projectors are used for business presentation and rear projection TV applications. They are not well suited for personally portable use or use for small groups in an informal setting. The use of projectors in LED pocket-sized projection display system promises to be a much more significant innovation. This paper presents that we replace Light Emitting Diode (LED) with the light source of general projection display, and design a new optical engine structure. In this case single red (R), green (G), blue (B) LEDs are used to create a 3 primary display. Injection-molded acrylic collimators redistribute the light. Then RGB colors are recomposed of by Dichroic X-CUB. A condenser lens is designed to focus the light onto the entrance of newly developed U shape integrator rod to have output light uniform; in this reseach, U shape rod is firstly introduced in this paper due to the minimization of optical system. A relay lens set working with TIR prism, will keep the light path onto the 0.55” DLP™ panel-DMD. TIR prism is employed as an angular analyzer for light from light vale and relay lens that separate the image and the illumination light by angle. In order to test the performance of the whole optical engine, we design two set of projection zoom lens for the illumination system and light valve system. Include system output luminous flux, illumination uniformity performance, and the packing size of the system. In this design, project image on the screen has its projected size in 17”~22” and its objective distance is approximate 600mm. To achieve maximum efficiency and effectiveness in the product design, we applies the integration of Taguchi methods and PCA and the Taguchi methods coupled with the powerful approach that combines PCA and fuzzy logic analysis to optimise multiple quality characteristics of a LED pocket-sized projection display system. A set of optimal design parameters will be developed to produce the best results on the system.
Jiang, Jhih-wun, i 姜智文. "Design and Implementation of An Embedded Multi-Projectors Stitching System". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/83677007853261138097.
Pełny tekst źródła國立中央大學
資訊工程學系
101
The application of multi-projector is often seen in a large exhibition. In general, multi-projector display system should be manually installed and calibrated by human. It is time-consuming and non-adaptable for the environment variation. We proposed a camera-based automatic multi-projector stitching method and implemented it into an embedded multi-projector display system. The system is consisted by a master controller and two or multiple slave controllers. The master controller captures the display images from all the projectors by camera and executes the geometric calibration and the brightness calibration for the overlap projection region between two projectors. The slave controllers serve for the display control of individual projector. Finally, a seamless multi-projector automatic stitching system is realized. Experiments show that our embedded multi-projector display system has good stitching quality as well as excellent synchronization mechanism.
Tsai, Ho-Min, i 蔡和旻. "Application of Piezoelectric Fan in Pico Projectors and its Thermal Investigation". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/5vagz5.
Pełny tekst źródła國立高雄應用科技大學
機械與精密工程研究所
102
This study embedding two different shaped piezoelectric fans into the micro projector as cooling devices to investigate the cooling effect of micro projector with various placed orientations, fins, blades material and operating frequency. The micro projector is experimented in a horizontally or vertically oriented and the two piezoelectric fans are placed in two heights, where those are placed 19mm and 26mm. Furthermore, the operating frequency ranges are depending on blades shape and material. The operating frequency ranges of narrow mylar, wide mylar and wide aluminum respectively are from 129.5 Hz to 135.5 Hz, 71.5 Hz to 86.5 Hz and 121.5 Hz to 145.5 Hz. The result showed that when piezoelectric fans are unactuated, vertically oriented cooling effect is better than horizontal placement. Moreover, the thermal resistance of the tested micro projector in vertical placement was descended where it was placed in heights 19 mm and 26 mm, the drop values are between 0.27 ℃/W and 1.61 ℃/W, and 0.15 ℃/W and 1.62 ℃/W respectively. Piezoelectric fans is acutely influenced by heat, especially when the micro projector was in horizontal placement, wherefore the piezoelectric fan amplitude change with different heat source power from 2 W to 7 W will be discussed. The result indicate that narrow mylar piezoelectric fans with array pin fins can achieve the lowest thermal resistant of the tested micro projector, where it is in vertical placement and furthermore the working frequency of piezoelectric fans is at 133.5 Hz. In the above case, the drop values of thermal resistant is from 3.52 ℃/W to 6.34 ℃/W, when heat source power from 2 W to 7 W. At a particular frequency, the maximum range of the thermal resistant shift is from 0.52 ℃/W to 3.92 ℃/W, when piezoelectric fan is affected by heat.
Shih, Bing-Hong, i 施秉鋐. "High-efficiency Polarized Light Illumination System for Liquid-Crystal-Display Projectors". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/89021141389001382112.
Pełny tekst źródła逢甲大學
電機工程所
98
This research use the polarization optics and ZEMAX optical design software to design the light polarization conversion components which fully convert the polarization state of light for the illumination light of the projection system. This research use ZEMAX optical design software to design the polarization conversion components, and analyze the illumination and parallelism of light by TRACEPRO analysis software for finishing the design of high-efficiency polarized light illumination system in the LCD projector. The system specification are: 46 mm × 40 mm × 5 mm、the material of all the lens are BK7 and light source wavelength is 546.1 nm. The light doesn’t pass through PBS and wave retarder, its irradiance is 13.395 watts (44.65%); and the light pass through PBS and wave retarder with power(focal length is equal to 5 mm ), its irradiance is 19.007 watts (63.35%). This study not only demonstrated that through the reflector and the polarization conversion element can effectively improve the efficiency from 44.65% to 63.35%, but also constructed a compact light illumination system in the LCD projectors.
"Projector-based interactive visual processing". Thesis, 2011. http://library.cuhk.edu.hk/record=b6075187.
Pełny tekst źródłaSecond, we extend the projection on traditional rigid screen to projection on flexible surfaces. A new flexible display method is proposed, which can project information on a hand-held flexible surface (e.g. an ordinary white paper with a checker pattern at the back) that can be twisted freely. While the user twists the projection surface, the system recovers the deformation of the surface and projects well-tailored information onto the surface corresponding to the deformation. As a result, the viewer will see the information as if it was printed on the paper. Two applications, the flexible image projection and curvilinear data slicing are created to demonstrate the usefulness of the method. After the studies on fixed-position projection, we conduct an investigation on mobile projectors, which is becoming especially necessary with the rapid popularity of mobile projectors. We propose a hand-held movable projection method that can freely project keystone-free content onto a general flat surface without any markings or boundaries on the displaying screen. Compared with traditional static projection systems that keep the projector and screen in fixed positions, our projection scheme can give the user greater freedom of display control while producing undistorted images at the same time.
The recent trend of human-computer interaction technologies has revealed the potential of the projector as an powerful interaction tool. More than a pure display tool, a projector has great strength that can change largely the way a traditional user interface works. Although some possibilities have been investigated in previous work, certain applications and approaches deserve further studies. For example, 1) Projection showing 3D information: viewing 3D models is usually achieved by projecting polarized light of different phases for left and right eyes, and the user is required to wear specially designed spectacles. The cost of building such a system is high. 2) Projection on flexible surface: most existing systems display information on flat rigid projection screens, extending it to non-planar flexible surfaces is an interesting and useful research direction; 3) Direct user-info interaction: existing systems using mouse and screen have limited freedom of control and low level of user experience. Direct manipulation of the display object by the hands of a user is more natural; 4) Mobile projector display: portable or embedded projectors are becoming more and more popular, but some fundamental problems, e.g. the keystone correction, are not fully studied.
To verify the correctness of our methods, we built prototype systems using off-the-shelf devices and conducted extensive experiments, including both simulation and real experiments. The results show that the proposed methods are effective and good performance has been achieved. In particular, the real-time speed and low-cost requirement make it quite appealing in many application areas, such as education, digital games, medical applications etc. Capitalizing on the shrinking size, increasing portability, and decreasing cost of projectors, it is predictable that projector-based interactive processing will become more and more popular in the near future. We believe the research work in this thesis will provide a good foundation for further research and development on computer vision and projector-based applications.
Li, Zhaorong.
Adviser: Kin-Hong Wong.
Source: Dissertation Abstracts International, Volume: 73-06, Section: B, page: .
Thesis (Ph.D.)--Chinese University of Hong Kong, 2011.
Includes bibliographical references (leaves 133-142).
Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web.
Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web.
Electronic reproduction. Ann Arbor, MI : ProQuest Information and Learning Company, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web.
Abstract also in Chinese.
Hsieh, Herbert, i 謝欣樺. "High-End Projectors New Project Development Management–A Case Study of M company". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/ftzyg2.
Pełny tekst źródła國立中央大學
工業管理研究所在職專班
102
Currently the video industry, the increasing popularity of large-size TV era, action to improve the convenience of display devices, think about how the conventional leadership under a competitive market, seek out the blue ocean leadership opportunities, market segmentation approach, to a high technical threshold of direction research and development, applied to large conference room, high lumens education in developing countries and emerging market demand for cinema, high-end projection system, currently in China, India, ASEAN and other regional areas and outdoor cinema projector market continues to grow . Project management skills through case company to achieve higher-order functions satisfy the customer demand projected date successfully market and make use of financial management methods projector case company departments to maintain profitable basis, so that businesses, manufacturing, materials, research and development related units can collaborate reach sector performance. So we generated the conclusions and suggestions were as below: A.Integration of the various stages of the development process of new project phase in, for the process to reduce the risks associated with lack of material and build a modular platform design concept in the future competitiveness of the industry's continued leadership derivative project. B.Establishment of financial management indicators, strengthen business sales mix to achieve the profit target by producing sector management methods, combined with the procurement strategy and project management to improve efficiency so that sustainable business models.
Shalaby, Mohamed Mahmoud Youssef, i Apostolos Vourdas. "Mutually unbiased projectors and duality between lines and bases in finite quantum systems". Thesis, 2013. http://hdl.handle.net/10454/9731.
Pełny tekst źródłaWu, Yen-Nien. "Geometric and Photometric Calibration for Tiling Multiple Projectors with a Pan-Tilt-Zoom Camera". 2004. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-1607200400163300.
Pełny tekst źródłaRose, David Emile Vatcher. "Categorification of quantum sl_3 projectors and the sl_3 Reshetikhin-Turaev invariant of framed tangles". Diss., 2012. http://hdl.handle.net/10161/5592.
Pełny tekst źródłaQuantum sl_3 projectors are morphisms in Kuperberg's sl_3 spider, a diagrammatically defined category equivalent to the full pivotal subcategory of the category of (type 1) finite-dimensional representations of the quantum group U_q (sl_3 ) generated by the defining representation, which correspond to projection onto (and then inclusion from) the highest weight irreducible summand. These morphisms are interesting from a topological viewpoint as they allow the combinatorial formulation of the sl_3 tangle invariant (in which tangle components are labelled by the defining representation) to be extended to a combinatorial formulation of the invariant in which components are labelled by arbitrary finite-dimensional irreducible representations. They also allow for a combinatorial description of the SU(3) Witten-Reshetikhin-Turaev 3-manifold invariant.
There exists a categorification of the sl_3 spider, due to Morrison and Nieh, which is the natural setting for Khovanov's sl_3 link homology theory and its extension to tangles. An obvious question is whether there exist objects in this categorification which categorify the sl_3 projectors.
In this dissertation, we show that there indeed exist such "categorified projectors," constructing them as the stable limit of the complexes assigned to k-twist torus braids (suitably shifted). These complexes satisfy categorified versions of the defining relations of the (decategorified) sl_3 projectors and map to them upon taking the Grothendieck group. We use these categorified projectors to extend sl_3 Khovanov homology to a homology theory for framed links with components labeled by arbitrary finite-dimensional irreducible representations of sl_3 .
Dissertation
Wu, Yen-Nien, i 吳延年. "Geometric and Photometric Calibration for Tiling Multiple Projectors with a Pan-Tilt-Zoom Camera". Thesis, 2004. http://ndltd.ncl.edu.tw/handle/13351493115037455304.
Pełny tekst źródła國立臺灣大學
資訊工程學研究所
92
Over the past few years a considerable number of studies have been made on building large, high-resolution displays. The aim of this thesis is to build a seamless large-scale display system by tiling multiple projectors with the help of a pan-tilt-zoom camera. It adds to the display world by combining different techniques to create a large, high-resolution, and low-cost display system. This research takes two tasks into consideration when producing the seamless display: (1) the geometric calibration and (2) the photometric calibration. Here, I develop a vision-based approach to accomplish these tasks by utilizing a pan-tilt-zoom video camera. Compared to previous work, my method for geometric calibration is more accurate because I have a much higher resolution (because I combine several zoom-in images). And it does not require a camera calibration, nor does it require the 3D geometry estimation of the display surface. As opposed to using the spectroradiometer, an expensive device previously used for color calibration, a camera is used due to its low cost. I take advantage of high dynamic range image to estimate the real color, and with a mapping between it and the colorimeter. With photometric calibration, the color across the different projectors will become uniform. This system has great potential for many applications that require large format and high resolution display, such as scientific visualizations and visual display wall.
Vourdas, Apostolos. "Random projectors with continuous resolutions of the identity in a finite-dimensional Hilbert space". 2019. http://hdl.handle.net/10454/17437.
Pełny tekst źródłaRandom sets are used to get a continuous partition of the cardinality of the union of many overlapping sets. The formalism uses Möbius transforms and adapts Shapley's methodology in cooperative game theory, into the context of set theory. These ideas are subsequently generalized into the context of finite-dimensional Hilbert spaces. Using random projectors into the subspaces spanned by states from a total set, we construct an infinite number of continuous resolutions of the identity, that involve Hermitian positive semi-definite operators. The simplest one is the diagonal continuous resolution of the identity, and it is used to expand an arbitrary vector in terms of a continuum of components. It is also used to define the function on the 'probabilistic quadrant' , which is analogous to the Wigner function for the harmonic oscillator, on the phase-space plane. Systems with finite-dimensional Hilbert space (which are naturally described with discrete variables) are described here with continuous probabilistic variables.
The full-text of this article will be released for public view at the end of the publisher embargo on 15 Oct 2020.
Research Development Fund Publication Prize Award winner, October 2019.
LIN, MIN-CHEN, i 林泯辰. "Designs and Analysis of Compact Projectors with Cemented Fly-eyes and X-cube Prisms". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/40974840181239287771.
Pełny tekst źródła國立高雄應用科技大學
機械與精密工程研究所
104
A compact projection system, using separated RGB LEDs as light sources, is designed mainly by cementing fly-eye arrays on the surfaces of X-cube prism, which is helpful for not only shrinking the system volume but also increasing the energy efficiency by reducing the reflection loss on optical surfaces. For constructing the initial first-order design of the illumination component, the focal lengths and dimensions of corresponding elements are solved by the optical invariant principle. The next step is to compare the influence on the uniformity for condensers with the same focal length but different lens shapes. Thirdly, condensers are optimized and analyzed for each primary colors. For imaging component, two types of telecentric lenses with purely spherical surfaces are designed. One design is not offset but the other provides offset ability to correct the keystone distortion. Eventually, both illumination and imaging parts are combined and the overall illumination uniformity on the projection screen is discussed.
Chiu, Chia-hao, i 邱嘉豪. "Color-Temperature Modulation of RGB LEDs and It’s Application of Color-Sequential Pico-Projectors". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/45268182586114439405.
Pełny tekst źródła國立中央大學
光電科學研究所
99
In this thesis, the modulations on LEDs driving current and duration ratio of RGB-LED-array as light source for pico-projector display were proposed. The light source that we use in this study is OSRAM LE ATB S2W. We perform our light source in consideration of three orientations, power consumption, brightness, and color temperature. Two designs for different projection types, low power-consumption and high brightness, are proposed. Both types are designed to achieve color temperature of 6500K. For a low-power-consumption type, the light source is able to supply 47 lm with color temperature of 6530K at only 0.85-watt power consumption. For high-brightness type, 78.08 lm flux output with color temperature of 6700K is achieved at 2.53 W. Only 5 % difference in brightness and 3 % difference in color temperature between design and measurement. Furthermore, we program a computation tool to simplify computations of prominent appropriate RGB duration ratio from inputting different objective color temperature and driving current of each LED. It also shows brightness and color space results.