Książki na temat „Processus de solidification”

Janssson, J. F., i U. W. Gedde, red. Solidification Processes in Polymers. Darmstadt: Steinkopff, 1992. http://dx.doi.org/10.1007/bfb0115564.

Symposium F on Advances in Solidification Processes (1993 Strasbourg, France). Advances in solidification processes. Amsterdam: North-Holland, 1993.

P, Bárczy, red. Solidification and microgravity. Zürich: Trans Tech Publications, 1991.

Risk Reduction Engineering Laboratory (U.S.), red. Interference mechanisms in waste stabilization/solidification processes: Project summary. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1990.

Jones, Larry W. Interference mechanisms in waste stabilization/solidification processes: Project summary. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1990.

International Conference on Modeling of Casting and Welding Processes (4th 1988 Palm Coast, Fla.). Modeling and control of casting and welding processes IV: Proceedings of the Fourth International Conference on Modeling of Casting and Welding Processes. Warrendale, Pa: Minerals, Metals & Materials Society, 1988.

Symposium, F. on Advances in Solidification Processes (1993 Strasbourg France). Advances in solidification processes: Proceedings of the Symposium F on Advances in Solidification Processes of the 1993 E-MRS Spring Conference, Strasbourg, France, May 4-7, 1993. Amsterdam: North Holland, 1993.

D, Solomon Alan, red. Mathematical modeling of melting and freezing processes. Washington: Hemisphere Pub. Corp., 1993.

International Conference on Modeling of Casting and Welding Processes (8th 1998 San Diego, Calif.). Modeling of casting, welding, and advanced solidification processes VIII: Proceedings of the Eighth International Conference on Modeling of Casting and Welding Processes, held in San Diego, California on June 7-12, 1998. Warrendale, Pa: Minerals, Metals & Materials Society, 1998.

1942-, Stefanescu Doru Michael, Engineering Conferences International i International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (10th : 2003 : Destin, Fla.), red. Modeling of casting, welding, and advanced solidification processes-X: Proceedings from the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes : held in Destin, Florida on May 25-30, 2003. Warrendale, Pa: Minerals, Metals & Materials Society, 2003.

MRS International Meeting on Advanced Materials (1st 1988 Tokyo, Japan). Powder preparation ; Rapid quenching: June 1-June 3, 1988, Sunshine City, Ikebukuro, Tokyo, Japan. Redaktorzy Akashi Kazuo 1928- i Materials Research Society. Pittsburgh, Pa: Materials Research Society, 1989.

International Conference on Modeling of casting, Welding, and Advanced Solidification Processes (12th 2009 Vancouver, B.C.). Modeling of casting, welding, and advanced solidification processes XII: Proceedings from the twelfth International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes : held on the Celebrity cuise ship Mercury, leaving from Vancouver, BC, Canada on June 7-14, 2009. Warrendale , Pa: TMS, 2009.

International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (9th 2000 Aachen, Germany). Modeling of casting, welding and advanced solidification processes IX: Proceedings of the ninth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes held in Aachen, Germany, on August 20 to 25, 2000. Aachen, Germany: Shaker, 2000.

H, Fredriksson, European Materials Research Society. Meeting i Council of Europe, red. State of the art of computer simulation of casting and solidification processes, 1986: June 17th-20th, 1986, Strasbourg (France). Les Ulis, France: Editions de physique, 1986.

Inc, 1366 Technologies, i National Renewable Energy Laboratory (U.S.), red. Kerfless silicon precursor wafer formed by rapid solidification: October 2009 - March 2010. Golden, Colo: National Renewable Energy Laboratory, 2011.

ASM Materials Week '86 (1986 Orlando, Fla.). Processing of structural metals by rapid solidification: Proceedings of a seven session symposium on Enhanced Properties in Structural Metals via Rapid Solidification sponsored by the Materials Processing Committee of ASM's Materials Science Division held at Materials Week '86, Orlando, Fla., 6-9 October 1986. [Metals Park, Ohio]: ASM International, 1987.

Conference on Modeling of Casting and Welding Processes (3rd 1986 Santa Barbara, Calif.). Modeling and control of casting and welding processes: Proceedings of the Third Conference on Modeling of Casting and Welding Processes, sponsored by the Engineering Foundation [and] held on January 12-17, 1986, in Santa Barbara, California. Warrendale, Pa: Metallurgical Society, 1986.

International Conference on Modeling of Casting and Welding Processes (5th 1990 Davos, Switzerland). Modeling of casting, welding and advanced solidification processes V: Proceedings of the Fifth International Conference on Modeling of Casting and Welding Processes : held in Davos, Switzerland, September 16-21, 1990. Warrendale, Pa: Minerals, Metals & Materials Society, 1991.

Conference on Modeling of Casting and Welding Processes. (4th 1988 Palm Coast, Fla.). Modeling and control of casting and welding processes IV: Proceedings of the Fourth International Conference on Modeling of Casting and Welding Processes, sponsored by the Engineering Foundation and co-sponsored by The Minerals, Metals & Materials Society, The American Society for Metals and the American Welding Society, held in Palm Coast, Florida April 17-22, 1988. Warrendale, PA: Minerals, Metals & Materials Society, 1988.

Eurotherm, Seminar (30th 1992 Orsay France). Heat transfer in phase-change processes: Melting and solidification : Eurotherm Seminar 30 proceedings : October 22-23, 1992, Orsay, France. [France?]: s.n., 1992.

International Conference on Modeling of Casting and Welding Processes (6th 1993 Palm Coast, Fla.). Modeling of casting, welding, and advanced solidification processes VI: Proceedings of the Sixth Conference in a series on Modeling, Casting, and Welding Processes, held in Palm Coast, Florida, March 21-26, 1993. Warrendale, Pa: Minerals, Metals & Materials Society, 1993.

International Congress on Waste Solidification-Stabilisation Processes (1995 Nancy, France). Proceedings of the International Congress on Waste Solidification-Stabilisation Processes: 28 November-1st December 1995, Nancy, France = Actes du Congrès international sur les procédés de solidification et de stabilisation des déchets / J.M. Cases and F. Thomas, editors. Grenoble: Société alpine de publications, 1997.

Michel, Rappaz, Özgü Mustafa R, Mahin Kim Walker i Engineering Foundation (U.S.), red. Modeling of casting, welding and advanced solidification processes V: Proceedings of the Fifth International Conference on Modeling of Casting and Welding Processes, held in Davos, Switzerland, September 16-21, 1990. Warrendale, Pa: Minerals, Metals & Materials Society, 1991.

United States. National Aeronautics and Space Administration., red. The influence of a microgravity environment on the dendritic morphology during directional solidification of hypoeutectic Al-Si alloys: Report to NASA code SN regarding work performed under grant NAGW-2540 which covered the period from 1 May 1991 to 30 April 1992. [Washington, DC: National Aeronautics and Space Administration, 1993.

Solidification processes in polymers. Darmstadt: Steinkopff, 1992.

Vases, J. M., i F. Thomas. Waste Solidification-stabilization Processes. Editions Technip, 1999.

Jansson, Jan-Fredrik, i Ulf Gedde. Solidification Processes in Polymers. Steinkopff, 2013.

Eshraghi, Mohsen, red. Numerical Simulation of Solidification Processes. MDPI, 2023. http://dx.doi.org/10.3390/books978-3-0365-8601-4.

Barczy. Solidification and Microgravity (Materials Science Forum,). Trans Tech Publications, 1992.

Johnson, W. L., i M. Tenhover. Science and Technology of Rapidly Quenched Alloys: Symposium (Materials Research Society Symposium Proceedings). Materials Research Society, 1987.

Johnson, W. L., L. E. Tanner i M. Tenhover. Science and Technology of Rapidly Quenched Alloys: Volume 80. University of Cambridge ESOL Examinations, 2014.

(Editor), B. G. Thomas, i C. Beckermann (Editor), red. Modeling of Casting, Welding and Advanced Solidification Processes (Conference on Modeling of Casting and Welding Processes//Proceedings). Minerals, Metals, & Materials Society, 1998.

(Editor), Mark Cross, i J. Campbell (Editor), red. Modeling of Casting, Welding and Advanced Solidification Processes (Conference on Modeling of Casting and Welding Processes//Proceedings). Minerals, Metals, & Materials Society, 1996.

Udaykumar, H. S. A mixed Eulerian-Lagrangian approach for the simulation of interfacial phenomena in solidifcation processing. 1994.

Stefanescu, Doru. Modeling of Casting, Welding, and Advanced Solidification Processes X. Minerals, Metals, & Materials Society, 2003.

Jansson, J. F. Solidification Processes in Polymers (Progress in Colloid & Polymer Science,). Springer, 1996.

(Editor), A. F. Giamei, i G. J. Abbaschian (Editor), red. Modeling and Control of Casting and Welding Processes IV. Tms, 1988.

Jansson, J. F. Solidification Processes in Polymers (Progress in Colloid & Polymer Science, Vol 87). Springer, 1992.

Symposium F on Advances in Solidification Processes, H. Jones, H. Fredriksson i G. Lesoult. Advances in Solidification Processes: Proceedings (European Materials Research Society Symposia Proceedings). North-Holland, 1994.

Institute of Physics (Great Britain) Staff. MCWASP XIV : International Conference on Modelling of Casting, Welding and Advanced Solidification Processes: Hyogo, Japan, 21-26 June 2015. Taylor & Francis Group, 2015.

(Editor), Michel Rappaz, Christoph Beckermann (Editor), Rohit Trivedi (Editor) i Wilfried Kurz (Editor), red. Solidification Processes and Microstructures: A Symposium in Honor of Wilfried Kurz. Minerals, Metals, & Materials Society, 2004.

Modeling of casting, welding, and advanced solidification processes VII: Proceedings of the seventh conference in a series on modeling, casting, and welding processes, held in London, England from 10-15 September 1995. Warrendale, Pa: TMS, 1995.

(Tokyo, Japan) Mrs International Meeting on Advanced Materials 1988, i Kazuo Akashi. Powder Preparation - Rapid Quenching: Materials Research Society International Symposium Proceedings - Imam No. 3. (Materials Research Society International Symposium Proceedings). Materials Research Society, 1989.

Modeling and Control of Casting and Welding Processes: Proceedings of the Third Conference on Modeling of Casting and Welding Processes, held on January 12-17, 1986, in Santa Barbara, California. Metallurgical Society, 1986.

Evtushenko, Yury, Vladimir Zubov i Anna Albu. Optimal control of thermal processes with phase transitions. LCC MAKS Press, 2021. http://dx.doi.org/10.29003/m2449.978-5-317-06677-2.

Campbell, F. C., red. Metals Fabrication. ASM International, 2013. http://dx.doi.org/10.31399/asm.tb.mfub.9781627083089.

A Review of Alternative Wasteforms and Processes for Future Solidification of High-level Liquid Wastes. AEA Technology Plc, 1986.

Rappaz, Michel, Mustafa R. Ozgu i Kim Walker Mahin. Modeling of Casting, Welding, and Advanced Solidification Processes, V: Proceedings of the Fifth International Conference on Modeling of Casting and (Conference ... Casting and Welding Processes//Proceedings). Minerals, Metals, & Materials Society, 1990.

Solidification processes and microstructures: A symposium in honor of Wilfried Kurz : proceedings of symposium held at the 2004 TMS Annual Meeting, Charlotte, North Carolina, March 14-18, 2004. Warrendale, Pa: TMS, 2004.

Piwonka, T. S., i V. Voller. Modeling of Casting, Welding and Advanced Solidification Processes - VI: Proceedings of the Sixth Conference in a Series on Modeling Casting and Wel (Conference ... Casting and Welding Processes//Proceedings). Tms, 1993.