Artykuły w czasopismach na temat „Printing method”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Printing method”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Phillips, Michael. "“Printing in the infernal method”: William Blake’s method of “Illuminated Printing”". Interfaces, nr 39 (1.07.2018): 67–89. http://dx.doi.org/10.4000/interfaces.489.
Pełny tekst źródłaChen, Ni, Qiang Wang, Ping Yang i Jun Long Xu. "Research on the Evaluation of Digital Prints Quality Based on Noise". Applied Mechanics and Materials 731 (styczeń 2015): 222–27. http://dx.doi.org/10.4028/www.scientific.net/amm.731.222.
Pełny tekst źródłaPeng Liu, Peng Liu, Ning Zhao Ning Zhao, Linghui Ren Linghui Ren i Qianqian Xu Qianqian Xu. "Color restoration method of printing in machine visual detection". Chinese Optics Letters 12, s1 (2014): S11501–311506. http://dx.doi.org/10.3788/col201412.s11501.
Pełny tekst źródłaYang, Minhua, Xin-guang Lv, Xiao-jie Liu i Jia-qing Zhang. "Research on color 3D printing based on color adherence". Rapid Prototyping Journal 24, nr 1 (2.01.2018): 37–45. http://dx.doi.org/10.1108/rpj-07-2016-0112.
Pełny tekst źródłaShen, Xiaoqiang, Zhiheng Yu, Fengli Huang, Jinmei Gu i Hui Zhang. "Fabrication of 3D microstructures for flexible pressure sensors based on direct-writing printing". AIP Advances 12, nr 10 (1.10.2022): 105205. http://dx.doi.org/10.1063/5.0107003.
Pełny tekst źródłaVaganov, A. V., S. S. Shemelyunas, A. A. Shvedunenko i A. M. Makarov. "3D PRINTING TIME REDUCTION METHOD". Izvestia Volgograd State Technical University, nr 3 (2022): 47–49. http://dx.doi.org/10.35211/1990-5297-2022-3-262-47-49.
Pełny tekst źródłaPhillips, Michael. ""Printing in the Infernal Method"". Interfaces 30, nr 1 (2010): 21–34. http://dx.doi.org/10.3406/inter.2010.1369.
Pełny tekst źródłaPhung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed". NIP & Digital Fabrication Conference 33, nr 1 (1.11.2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.126.
Pełny tekst źródłaPhung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed". NIP & Digital Fabrication Conference 33, nr 1 (1.11.2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.1.art00030_1.
Pełny tekst źródłaJi, Wen Ge, Hua Wu, Jing Shen i Mei Feng Wang. "A Novel and Efficient Method for Digital Printing". Applied Mechanics and Materials 404 (wrzesień 2013): 668–71. http://dx.doi.org/10.4028/www.scientific.net/amm.404.668.
Pełny tekst źródłaTeng, H. M., S. K. Fan, C. H. Jiang, Q. W. Yang, F. H. Liu i C. C. Tsao. "Study on the printing quality of fused deposition modeling using Taguchi method". Journal of Physics: Conference Series 2345, nr 1 (1.09.2022): 012014. http://dx.doi.org/10.1088/1742-6596/2345/1/012014.
Pełny tekst źródłaCoggiola, Vivian N., Juan Pablo Real i Santiago D. Palma. "A new method for 3D printing drugs: melting solidification printing process". Journal of 3D Printing in Medicine 4, nr 3 (wrzesień 2020): 131–34. http://dx.doi.org/10.2217/3dp-2020-0024.
Pełny tekst źródłaPhung, Thanh Huy, Seora Kim i Kye-Si Kwon. "A high speed electrohydrodynamic (EHD) jet printing method for line printing". Journal of Micromechanics and Microengineering 27, nr 9 (2.08.2017): 095003. http://dx.doi.org/10.1088/1361-6439/aa7c6b.
Pełny tekst źródłaNemoto, Nobuki, Takeo Miki i Takashi Yamaguchi. "Digital Watermark for Printing Images -Application to Thermal Transfer Printing Method-". NIP & Digital Fabrication Conference 30, nr 1 (1.01.2014): 243–48. http://dx.doi.org/10.2352/issn.2169-4451.2014.30.1.art00060_1.
Pełny tekst źródłaCykowska-Błasiak, Małgorzata, i Paweł Ozga. "3D printing, as a tool for planning orthopedic surgery". Budownictwo i Architektura 14, nr 1 (10.03.2015): 015–23. http://dx.doi.org/10.35784/bud-arch.1662.
Pełny tekst źródłaZhou, Jin Feng, Zeng Kai Jin, Mei Fei Zhang i Hui Ying Chen. "A Fast Digital Printing Method for Silk Book". Advanced Materials Research 811 (wrzesień 2013): 304–7. http://dx.doi.org/10.4028/www.scientific.net/amr.811.304.
Pełny tekst źródłaWang, Yi Ming, Bang She Chen, Yan Li i Shao Hua Zhang. "Research on Dynamic Design Method Based on Measuring Information for Printing Press". Advanced Materials Research 174 (grudzień 2010): 290–94. http://dx.doi.org/10.4028/www.scientific.net/amr.174.290.
Pełny tekst źródłaLuo, Mingying. "Discussion on Redesign of Image from Digital Printing Process". Asian Journal of Social Science Studies 2, nr 2 (26.05.2017): 45. http://dx.doi.org/10.20849/ajsss.v2i2.163.
Pełny tekst źródłaWang, Xin Feng, Qing Quan Liao, Fang Xie i Yi Tao. "A Kind of Electrode Printing Screen of Equivalent Elastic Modulus Calculation Method". Key Engineering Materials 546 (marzec 2013): 81–83. http://dx.doi.org/10.4028/www.scientific.net/kem.546.81.
Pełny tekst źródłaShi, Jing Min, Jian Wei Wang i Wei Xiao. "Research Progress of Preparation Technology of Nano Copper Powder for 3D Printing". Key Engineering Materials 777 (sierpień 2018): 150–57. http://dx.doi.org/10.4028/www.scientific.net/kem.777.150.
Pełny tekst źródłaKamalElDeen, Marwa. "Studying the influence of using Nano technology on printing methods future and un-printing image method". International Design Journal 1, nr 1 (1.01.2012): 1–7. http://dx.doi.org/10.21608/idj.2012.295283.
Pełny tekst źródłaHan, Qiang, i Wei Huang. "Control Method for Improving Efficiency of Digital Inkjet Printing". Advanced Materials Research 816-817 (wrzesień 2013): 467–70. http://dx.doi.org/10.4028/www.scientific.net/amr.816-817.467.
Pełny tekst źródłaDelehanty, James B., i Frances S. Ligler. "Method for Printing Functional Protein Microarrays". BioTechniques 34, nr 2 (luty 2003): 380–85. http://dx.doi.org/10.2144/03342mt02.
Pełny tekst źródłaNikitov, S. A., L. Presmanes, Ph Tailhades i D. E. Balabanov. "Magnetic duplication and contact printing method". Journal of Magnetism and Magnetic Materials 241, nr 1 (marzec 2002): 124–30. http://dx.doi.org/10.1016/s0304-8853(01)00920-9.
Pełny tekst źródłaNino, Cesar L., i T. Roger Keane. "A Robust Multi-pass Printing Method". NIP & Digital Fabrication Conference 23, nr 1 (1.01.2007): 781–86. http://dx.doi.org/10.2352/issn.2169-4451.2007.23.1.art00065_2.
Pełny tekst źródłaChoi, B.-O., C. H. Kim i D. S. Kim. "Manufacturing ultra-high-frequency radio frequency identification tag antennas by multilayer printings". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 224, nr 1 (11.08.2009): 149–56. http://dx.doi.org/10.1243/09544062jmes1610.
Pełny tekst źródłaKokosha, Anna, Dmytro Uschapovskyi, Viktoriya Vorobyova, Tetiana Motronyuk i Georgy Vasiliev. "CORROSION RESISTANCE OF ZINC GALVANIC DEPOSITS OBTAINED BY THE ELECTROCHEMICAL 3D PRINTING METHOD". TECHNICAL SCIENCES AND TECHNOLOGIES, nr 1(35) (2024): 232–39. http://dx.doi.org/10.25140/2411-5363-2024-1(35)-232-239.
Pełny tekst źródłaCao, Ying Yu, Hui Qi Gong, Jia Yi Jin, Wang De Wu i Ji Zong Wang. "The Study of Wide-Format Digital Inkjet Printers’ Carriage Control Method with Double-Carriage". Applied Mechanics and Materials 741 (marzec 2015): 749–56. http://dx.doi.org/10.4028/www.scientific.net/amm.741.749.
Pełny tekst źródłaKoponen, Jarmo, Keijo Haataja i Pekka Toivanen. "A novel deep learning method for recognizing texts printed with multiple different printing methods". F1000Research 12 (20.04.2023): 427. http://dx.doi.org/10.12688/f1000research.131775.1.
Pełny tekst źródłaHu, Qingxi, Die Feng, Haiguang Zhang, Yuan Yao, Mohamed Aburaia i Herfried Lammer. "Oriented to Multi-Branched Structure Unsupported 3D Printing Method Research". Materials 13, nr 9 (26.04.2020): 2023. http://dx.doi.org/10.3390/ma13092023.
Pełny tekst źródłaWang, Ying, Hao Xue Liu i Min Huang. "A Novel Method to Qualify the Status of Printing Process Rapidly". Advanced Materials Research 174 (grudzień 2010): 203–6. http://dx.doi.org/10.4028/www.scientific.net/amr.174.203.
Pełny tekst źródłaZhang, Xinyu, Xiang Chi, Zongan Li, Zhe Yuan, Jiquan Yang, Liya Zhu i Feng Zhang. "An electrohydrodynamic (EHD) printing method with nanosilver ink for flexible electronics". International Journal of Modern Physics B 34, nr 17 (15.06.2020): 2050154. http://dx.doi.org/10.1142/s0217979220501544.
Pełny tekst źródłaZeng, Lingwei, Fan Zhang, Xinghua Zhang i Yiwen Tu. "3D printing path method for multi-tow continuous carbon fiber". Journal of Physics: Conference Series 2760, nr 1 (1.05.2024): 012054. http://dx.doi.org/10.1088/1742-6596/2760/1/012054.
Pełny tekst źródłaYu, JiangYou, Le Cao, Hao Fu i Jun Guo. "A method for optimizing stencil cleaning time in solder paste printing process". Soldering & Surface Mount Technology 31, nr 4 (2.09.2019): 233–39. http://dx.doi.org/10.1108/ssmt-10-2018-0037.
Pełny tekst źródłaDu, Bin, Shi Sheng Zhou i Nan Wang. "Study on Printing Techniques of Modified Aluminum Paste Printing Ink". Advanced Materials Research 181-182 (styczeń 2011): 691–96. http://dx.doi.org/10.4028/www.scientific.net/amr.181-182.691.
Pełny tekst źródłaAhn, Ju-Hun, Han-Na Kim, Jin Yeon Cho, Jeong Ho Kim i Chang-Yull Lee. "Evaluation of Temperature Sensors for Detection of Heat Sources Using Additive Printing Method". Sensors 22, nr 21 (29.10.2022): 8308. http://dx.doi.org/10.3390/s22218308.
Pełny tekst źródłaQiu, Jingjiang, Junfu Li, Zhongwei Guo, Yudong Zhang, Bangbang Nie, Guochen Qi, Xiang Zhang, Jiong Zhang i Ronghan Wei. "3D Printing of Individualized Microfluidic Chips with DLP-Based Printer". Materials 16, nr 21 (31.10.2023): 6984. http://dx.doi.org/10.3390/ma16216984.
Pełny tekst źródłaShen, Xin Min, Jian Zhao Zhou i Qun Zhang Tu. "Development of Three-Dimensional Printing Technology Based on Deterministic Electrochemical Deposition Method". Advanced Materials Research 1089 (styczeń 2015): 319–23. http://dx.doi.org/10.4028/www.scientific.net/amr.1089.319.
Pełny tekst źródłaZhao, Chen Fei, Qing Han i Yong Chang Chen. "Research on Ink's Dot Area Percentage's Prediction in Digital Printing Based on Spectrum Analyzing". Applied Mechanics and Materials 469 (listopad 2013): 340–43. http://dx.doi.org/10.4028/www.scientific.net/amm.469.340.
Pełny tekst źródłaHung, Tsung Hsin. "The Integration of Taguchi Method and FAHP Method to Improve the SMT Solder Paste Printing Thickness Processing Capability". Advanced Materials Research 569 (wrzesień 2012): 316–19. http://dx.doi.org/10.4028/www.scientific.net/amr.569.316.
Pełny tekst źródłaRitonga, Nurhikma, Neni Mulyani i Rika Nofitri. "IMPLEMENTATION OF E-COMMERCE IN PERCETAKAN CITRA BERSAMA TANJUNGBALAI USING THE CRM METHOD". Jurnal Riset Informatika 4, nr 2 (6.03.2022): 183–90. http://dx.doi.org/10.34288/jri.v4i2.369.
Pełny tekst źródłaLi, Wei Wei, Lu Hai Li, Li Xin Mo, Xu Wei Hu, Xian Leng, Hua Fang, Wen Bo Li i Shu Kun Li. "Progress of Printing RFID Antenna Using Water-Based Conductive Ink". Advanced Materials Research 380 (listopad 2011): 137–40. http://dx.doi.org/10.4028/www.scientific.net/amr.380.137.
Pełny tekst źródłaWang, Jun, Tie Feng Zhang i Xiang Yi Guan. "Study on Fuzzy Comprehensive Evaluation Model of Printing Quality Based on AHP Method". Advanced Materials Research 174 (grudzień 2010): 243–46. http://dx.doi.org/10.4028/www.scientific.net/amr.174.243.
Pełny tekst źródłaZhang, Wei, Xiangwen Deng i Jie Cai. "Intelligent Automatic 3D Printing Machine Based on Wireless Network Communication". Wireless Communications and Mobile Computing 2021 (16.12.2021): 1–14. http://dx.doi.org/10.1155/2021/1778281.
Pełny tekst źródłaCha, Minsu, Chang-Won Kim, Taehee Lee, Baek-Joong Kim, Hunhee Cho, Taehoon Kim i Hyunsu Lim. "An Optimal Layout Model of Curved Panels for Using 3D Printing". Sustainability 14, nr 21 (26.10.2022): 13896. http://dx.doi.org/10.3390/su142113896.
Pełny tekst źródłaLi, Bing Fang. "Study on Client-Side Color Reproduction Methods of Network Printing". Applied Mechanics and Materials 182-183 (czerwiec 2012): 1967–71. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.1967.
Pełny tekst źródłaJing, Jianping, Yasufumi Takama i Toru Yamaguchi. "Application of Fuzzy Inference Method in Printing Pressure State Expectation System". Journal of Advanced Computational Intelligence and Intelligent Informatics 10, nr 4 (20.07.2006): 594–601. http://dx.doi.org/10.20965/jaciii.2006.p0594.
Pełny tekst źródłaKim, Min-Wook, Sang-Hyun Park i Kye-Si Kwon. "Bi-Direction Continuous Inkjet Printing for Selective Area Coating". Journal of Flexible and Printed Electronics 2, nr 2 (grudzień 2023): 273–80. http://dx.doi.org/10.56767/jfpe.2023.2.2.273.
Pełny tekst źródłaGuan, Jiaao, Shangting You, Yi Xiang, Jacob Schimelman, Jeffrey Alido, Xinyue Ma, Min Tang i Shaochen Chen. "Compensating the cell-induced light scattering effect in light-based bioprinting using deep learning". Biofabrication 14, nr 1 (3.12.2021): 015011. http://dx.doi.org/10.1088/1758-5090/ac3b92.
Pełny tekst źródłaZhang, Haiguang, Wenguang Zhong, Qingxi Hu, Mohamed Aburaia, Joamin Gonzalez-Gutierrez i Herfried Lammer. "Research and Implementation of Axial 3D Printing Method for PLA Pipes". Applied Sciences 10, nr 13 (7.07.2020): 4680. http://dx.doi.org/10.3390/app10134680.
Pełny tekst źródła