Zaloguj się

Gotowe bibliografie tematyczne / Power hardware in loop / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Power hardware in loop.

Artykuły w czasopismach na temat „Power hardware in loop”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Power hardware in loop”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Brandl, Ron, Mihai Calin i Thomas Degner. "Power hardware-in-the-loop setup for power system stability analyses". CIRED - Open Access Proceedings Journal 2017, nr 1 (1.10.2017): 387–90. http://dx.doi.org/10.1049/oap-cired.2017.1100.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Kikusato, Hiroshi, Taha Selim Ustun, Masaichi Suzuki, Shuichi Sugahara, Jun Hashimoto, Kenji Otani, Kenji Shirakawa, Rina Yabuki, Ken Watanabe i Tatsuaki Shimizu. "Microgrid Controller Testing Using Power Hardware-in-the-Loop". Energies 13, nr 8 (20.04.2020): 2044. http://dx.doi.org/10.3390/en13082044.

Pełny tekst źródła

Streszczenie:

Required functions of a microgrid become divers because there are many possible configurations that depend on the location. In order to effectively implement the microgrid system, which consists of a microgrid controller and components with distributed energy resources (DERs), thorough tests should be run to validate controller operation for possible operating conditions. Power-hardware-in-the-loop (PHIL) simulation is a validation method that allows different configurations and yields reliable results. However, PHIL configuration for testing the microgrid controller that can evaluate the communication between a microgrid controller and components as well as the power interaction among microgrid components has not been discussed. Additionally, the difference of the power rating of microgrid components between the deployment site and the test lab needs to be adjusted. In this paper, we configured the PHIL environment, which integrates various equipment in the laboratory with a digital real-time simulation (DRTS), to address these two issues of microgrid controller testing. The test in the configured PHIL environment validated two main functions of the microgrid controller, which supports the diesel generator set operations by controlling the DER, regarding single function and simultaneously activated multiple functions.

Style APA, Harvard, Vancouver, ISO itp.

3

Puschmann, Frank. "Sicheres Testen durch Power-Hardware-in-the-Loop-Systeme". ATZelektronik 16, nr 7-8 (lipiec 2021): 52–55. http://dx.doi.org/10.1007/s35658-021-0645-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Puschmann, Frank. "Safe Testing through Power Hardware-in-the-Loop Systems". ATZelectronics worldwide 16, nr 7-8 (lipiec 2021): 50–53. http://dx.doi.org/10.1007/s38314-021-0649-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Ojaghloo, B., i G. B. Gharehpetian. "Power Hardware In The Loop Realization, Control and Simulation". Renewable Energy and Power Quality Journal 1, nr 15 (kwiecień 2017): 108–13. http://dx.doi.org/10.24084/repqj15.235.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Jha, Kapil, Santanu Mishra i Avinash Joshi. "Boost-Amplifier-Based Power-Hardware-in-the-Loop Simulator". IEEE Transactions on Industrial Electronics 62, nr 12 (grudzień 2015): 7479–88. http://dx.doi.org/10.1109/tie.2015.2454489.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

García-Martínez, Eduardo, José Francisco Sanz, Jesús Muñoz-Cruzado i Juan Manuel Perié. "Online database of Power Hardware In-the-Loop tests". Data in Brief 29 (kwiecień 2020): 105128. http://dx.doi.org/10.1016/j.dib.2020.105128.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Racewicz, Szymon, Filip Kutt i Łukasz Sienkiewicz. "Power Hardware-In-the-Loop Approach for Autonomous Power Generation System Analysis". Energies 15, nr 5 (25.02.2022): 1720. http://dx.doi.org/10.3390/en15051720.

Pełny tekst źródła

Streszczenie:

The article presents the Power Hardware-In-the-Loop (PHIL) dynamic model of a synchronous generator of 125 kVA for autonomous power generation system analysis. This type of system is typically composed of electrical energy sources in the form of several diesel generator units with synchronous machines, the main distribution switchboard and different loads. In modern power distribution systems, the proposed power management strategies are typically aimed at the minimization of fuel consumption by maintaining the operation of diesel generator units at peak efficiency. In order to design and test such a system in conditions as close as possible to the real operating conditions, without constructing an actual power distribution system, a PHIL model in the form of a power inverter that emulates the behaviour of a real synchronous generator is proposed. The PHIL model was prepared in the MATLAB/Simulink environment, compiled to the C language and fed into a 150 kVA bidirectional DC/AC commercial-grade converter driven by a HIL real-time simulation control unit. Experimental research was performed in the LINTE2 laboratory of the Gdańsk University of Technology (Poland), where the PHIL emulator was developed. The proposed model was validated by comparing the output voltages and currents as well as an excitation current with the measurements performed on the 125 kVA synchronous generator. The obtained results proved satisfactory compliance of the PHIL model with its real counterpart.

Style APA, Harvard, Vancouver, ISO itp.

9

Yu, Jungkyum, Kwangil Kim i Kyongsu Yi. "Development of a hardware-in-the-loop simulation system for power seat and power trunk electronic control unit validation". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233, nr 3 (23.02.2018): 636–49. http://dx.doi.org/10.1177/0954407017751951.

Pełny tekst źródła

Streszczenie:

This paper describes a hardware-in-the-loop simulation system for the validation of a vehicle body electronic control unit. The hardware-in-the-loop simulation system consists of three parts: a real-time target machine, an electronic control unit, and a signal conditioning unit, which regulates the voltage levels between the real-time target and the electronic control unit. The real-time target machine generates switch and feedback signals to the electronic control unit. The software model, representing body electronics hardware, such as a power seat and power trunk, runs inside a real-time target machine. The software model is composed of a mechanical part that represents the dynamic behaviors and an electronic part to calculate the motor speeds, current, and electronic loads under various conditions. The hardware-in-the-loop test was carried out for two different large passenger vehicle electronic control units, since the purpose of this research is to validate the various electronic control units by just simply modifying the corresponding vehicle model, the power seat, and the power trunk. Test results indicate that the developed software model can effectively replace the real hardware, and that this virtual model can be used to validate the signal logic between the electronic control unit and the model. In addition, the electrical robustness of the electronic control unit was validated by applying surge currents to the electronic control unit.

Style APA, Harvard, Vancouver, ISO itp.

10

Li, Junhong. "Practice of power electronic hardware loop simulation based on fpga". IOP Conference Series: Materials Science and Engineering 452 (13.12.2018): 042069. http://dx.doi.org/10.1088/1757-899x/452/4/042069.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Kim, Dae-Jin, Byungki Kim, Kung-Sang Ryu, Gwang-Se Lee, Moon-Seok Jang i Hee-Sang Ko. "Development of PV-Power-Hardware-In-Loop Simulator with Realtime to Improve the Performance of the Distributed PV Inverter". Journal of the Korean Solar Energy Society 37, nr 3 (30.06.2017): 47–59. http://dx.doi.org/10.7836/kses.2017.37.3.047.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Moore, R. M., K. H. Hauer, G. Randolf i M. Virji. "Fuel cell hardware-in-loop". Journal of Power Sources 162, nr 1 (listopad 2006): 302–8. http://dx.doi.org/10.1016/j.jpowsour.2006.06.066.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

García Martínez, E., J. F. Sanz Osorio, J. Muñoz Cruzado Alba i J. M. Perié. "Massive Parallel Current Power Amplifier Concept for Power Hardware in the Loop Applications". Renewable Energy and Power Quality Journal 20 (wrzesień 2022): 374–78. http://dx.doi.org/10.24084/repqj20.316.

Pełny tekst źródła

Streszczenie:

The development of the smartgrid increases the complexity of the current electric grid. To verify and validate the operation of the systems involved in it, Power Hardware-In-theLoop (PHIL) technique allows to test the complete system in an exhaustive way. But the reduced bandwidth of the overall test system can cause inaccuracies and instabilities, which can be harmful for the Hardware Under Test (HUT) or the people who are performing the test. To increase PHIL performance and tackle these problems, this paper proposes a new concept of high bandwidth current amplifier. It is based on a topology of massive parallel interleaved buck-boost converter, which distribute in an equal manner the total current in all the branches. This current reduction allows to use transistors with better switching behaviour, which increase the bandwidth of the converter. Furthermore, a Discontinuous Conduction Mode (DCM) is used, obtaining the nominal output current in only one switching cycle. Description of the concept and the design parameters are provided. Finally, the behaviour of the proposed Power Amplifier (PA) at high frequency setpoint currents is shown in a Matlab/Simulink simulation.

Style APA, Harvard, Vancouver, ISO itp.

14

Badar, Jahangir, Saddaqat Ali, Hafiz Mudassir Munir, Veer Bhan, Syed Sabir Hussain Bukhari i Jong-Suk Ro. "Reconfigurable Power Quality Analyzer Applied to Hardware-in-Loop Test Bench". Energies 14, nr 16 (19.08.2021): 5134. http://dx.doi.org/10.3390/en14165134.

Pełny tekst źródła

Streszczenie:

Integration of renewable energy resources and conventional grids leads to an increase in power quality issues. These power quality issues require different standards to be followed for accurate measurement and monitoring of various parameters of the power system. Conventional power quality analyzers (PQAs) are programmed to a particular standard and cannot be reconfigured by the end user. Therefore, conventional PQAs cannot meet the challenges of a rapidly changing grid. In this regard, a Compact RIO-based (CRIO-based) PQA was proposed, that can be easily reprogrammed and cope with the challenges faced by conventional PQAs. The salient features of the proposed PQA are a high processing speed, interactive interface, and high-quality data-storage capacity. Moreover, unlike conventional PQAs, the proposed PQA can be monitored remotely via the internet. In this research, a hardware-in-loop (HIL) simulation is used for performing the power-quality assessment in a systematic manner. Power quality indices such as apparent power, power factor, harmonics, frequency disturbance, inrush current, voltage sag and voltage swell are considered for validating the performance of the proposed PQA against the Fluke’s PQA 43-B.

Style APA, Harvard, Vancouver, ISO itp.

15

Muhammad, Moiz, Holger Behrends, Stefan Geißendörfer, Karsten von Maydell i Carsten Agert. "Power Hardware-in-the-Loop: Response of Power Components in Real-Time Grid Simulation Environment". Energies 14, nr 3 (25.01.2021): 593. http://dx.doi.org/10.3390/en14030593.

Pełny tekst źródła

Streszczenie:

With increasing changes in the contemporary energy system, it becomes essential to test the autonomous control strategies for distributed energy resources in a controlled environment to investigate power grid stability. Power hardware-in-the-loop (PHIL) concept is an efficient approach for such evaluations in which a virtually simulated power grid is interfaced to a real hardware device. This strongly coupled software-hardware system introduces obstacles that need attention for smooth operation of the laboratory setup to validate robust control algorithms for decentralized grids. This paper presents a novel methodology and its implementation to develop a test-bench for a real-time PHIL simulation of a typical power distribution grid to study the dynamic behavior of the real power components in connection with the simulated grid. The application of hybrid simulation in a single software environment is realized to model the power grid which obviates the need to simulate the complete grid with a lower discretized sample-time. As an outcome, an environment is established interconnecting the virtual model to the real-world devices. The inaccuracies linked to the power components are examined at length and consequently a suitable compensation strategy is devised to improve the performance of the hardware under test (HUT). Finally, the compensation strategy is also validated through a simulation scenario.

Style APA, Harvard, Vancouver, ISO itp.

16

Vogel, Steffen, Ha Thi Nguyen, Marija Stevic, Tue Vissing Jensen, Kai Heussen, Vetrivel Subramaniam Rajkumar i Antonello Monti. "Distributed Power Hardware-in-the-Loop Testing Using a Grid-Forming Converter as Power Interface". Energies 13, nr 15 (22.07.2020): 3770. http://dx.doi.org/10.3390/en13153770.

Pełny tekst źródła

Streszczenie:

This paper presents an approach to extend the capabilities of smart grid laboratories through the concept of Power Hardware-in-the-Loop (PHiL) testing by re-purposing existing grid-forming converters. A simple and cost-effective power interface, paired with a remotely located Digital Real-time Simulator (DRTS), facilitates Geographically Distributed Power Hardware Loop (GD-PHiL) in a quasi-static operating regime. In this study, a DRTS simulator was interfaced via the public internet with a grid-forming ship-to-shore converter located in a smart-grid testing laboratory, approximately 40 km away from the simulator. A case study based on the IEEE 13-bus distribution network, an on-load-tap-changer (OLTC) controller and a controllable load in the laboratory demonstrated the feasibility of such a setup. A simple compensation method applicable to this multi-rate setup is proposed and evaluated. Experimental results indicate that this compensation method significantly enhances the voltage response, whereas the conservation of energy at the coupling point still poses a challenge. Findings also show that, due to inherent limitations of the converter’s Modbus interface, a separate measurement setup is preferable. This can help achieve higher measurement fidelity, while simultaneously increasing the loop rate of the PHiL setup.

Style APA, Harvard, Vancouver, ISO itp.

17

Montoya, Juan, Ron Brandl, Keerthi Vishwanath, Jay Johnson, Rachid Darbali-Zamora, Adam Summers, Jun Hashimoto i in. "Advanced Laboratory Testing Methods Using Real-Time Simulation and Hardware-in-the-Loop Techniques: A Survey of Smart Grid International Research Facility Network Activities". Energies 13, nr 12 (24.06.2020): 3267. http://dx.doi.org/10.3390/en13123267.

Pełny tekst źródła

Streszczenie:

The integration of smart grid technologies in interconnected power system networks presents multiple challenges for the power industry and the scientific community. To address these challenges, researchers are creating new methods for the validation of: control, interoperability, reliability of Internet of Things systems, distributed energy resources, modern power equipment for applications covering power system stability, operation, control, and cybersecurity. Novel methods for laboratory testing of electrical power systems incorporate novel simulation techniques spanning real-time simulation, Power Hardware-in-the-Loop, Controller Hardware-in-the-Loop, Power System-in-the-Loop, and co-simulation technologies. These methods directly support the acceleration of electrical systems and power electronics component research by validating technological solutions in high-fidelity environments. In this paper, members of the Survey of Smart Grid International Research Facility Network task on Advanced Laboratory Testing Methods present a review of methods, test procedures, studies, and experiences employing advanced laboratory techniques for validation of range of research and development prototypes and novel power system solutions.

Style APA, Harvard, Vancouver, ISO itp.

18

Ren, W., H. Chen i J. Song. "Model-based development for an electric power steering system". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222, nr 7 (1.07.2008): 1265–69. http://dx.doi.org/10.1243/09544062jmes925.

Pełny tekst źródła

Streszczenie:

A model-based development method for electric power steering (EPS) system has been explored. A practicable model for the EPS system has been established in a full vehicle mechanical system environment. The performance of the electric control system of the EPS system has been evaluated in this static analysis environment. The model has then been used in a dynamic test environment based on dSPACE hardware and software, including Software-in-the-Loop and Hardware-in-the-Loop. The test result validates the simulation model, and shows that this development method can be used to evaluate the conceptual design of the EPS system as well as the control software design and testing.

Style APA, Harvard, Vancouver, ISO itp.

19

Liang, Jian Wei, Ling Liang i Shu Ren Han. "Design of Dual-PWM VVVF System Based on ARM". Advanced Materials Research 756-759 (wrzesień 2013): 569–73. http://dx.doi.org/10.4028/www.scientific.net/amr.756-759.569.

Pełny tekst źródła

Streszczenie:

The article, three-phase squirrel cage induction motor as the research object, introduces the design of a new dual-PWM VVVF system based on ARM. The rectifier link design control strategies based on the power of the inner power loop and outer voltage square loop control system. The inverter link design a double infinite loop vector control speed regulation system of torque, flux linkage to the inner ring, rotational speed to the outer ring a double infinite loop vector control . And then, to combine rectifier link and inverter link to build dual-PWM VVVF system. Focuses on realization of the control system software and hardware-based LPC2132 and μ C/OS-II. Gives the hardware design of the overall program, as well as software realization based on the hardware μC/OS-IIoperating system . Introduce some of the specific features of the program as well as hardware and software anti-jamming technology . Conduct simulation verification to the dual-PWM VVVF system. The results show that: The dual-PWM control system can realize better control effect.

Style APA, Harvard, Vancouver, ISO itp.

20

Upamanyu, Kapil, i G. Narayanan. "Improved Accuracy, Modeling, and Stability Analysis of Power-Hardware-in-Loop Simulation With Open-Loop Inverter as Power Amplifier". IEEE Transactions on Industrial Electronics 67, nr 1 (styczeń 2020): 369–78. http://dx.doi.org/10.1109/tie.2019.2896093.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Lauss, Georg, M. Omar Faruque, Karl Schoder, Christian Dufour, Alexander Viehweider i James Langston. "Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems". IEEE Transactions on Industrial Electronics 63, nr 1 (styczeń 2016): 406–17. http://dx.doi.org/10.1109/tie.2015.2464308.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Marks, Nathan D., Wang Y. Kong i Daniel S. Birt. "Stability of a Switched Mode Power Amplifier Interface for Power Hardware-in-the-Loop". IEEE Transactions on Industrial Electronics 65, nr 11 (listopad 2018): 8445–54. http://dx.doi.org/10.1109/tie.2018.2814011.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Jiaqun, Xu, Xing Meili i Zhang Hongqiang. "Universal Power-Hardware-in-the-Loop Simulator for BLDCM and PMSM". Journal of Magnetics 24, nr 3 (30.09.2019): 454–62. http://dx.doi.org/10.4283/jmag.2019.24.3.454.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Petrochenkov, A. B., T. Frank, A. V. Romodin i A. V. Kychkin. "Hardware-in-the-loop simulation of an active-adaptive power grid". Russian Electrical Engineering 84, nr 11 (listopad 2013): 652–58. http://dx.doi.org/10.3103/s1068371213110102.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Kim, Jin-Geun, Sung-Kyu Kim, Minwon Park i In-Keun Yu. "Hardware-in-the-Loop Simulation for Superconducting DC Power Transmission System". IEEE Transactions on Applied Superconductivity 25, nr 3 (czerwiec 2015): 1–4. http://dx.doi.org/10.1109/tasc.2015.2406293.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Tremblay, Olivier, Handy Fortin-Blanchette, Richard Gagnon i Yves Brissette. "Contribution to stability analysis of power hardware-in-the-loop simulators". IET Generation, Transmission & Distribution 11, nr 12 (24.08.2017): 3073–79. http://dx.doi.org/10.1049/iet-gtd.2016.1574.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Ruuskanen, Vesa, Joonas Koponen, Kimmo Huoman, Antti Kosonen, Markku Niemelä i Jero Ahola. "PEM water electrolyzer model for a power-hardware-in-loop simulator". International Journal of Hydrogen Energy 42, nr 16 (kwiecień 2017): 10775–84. http://dx.doi.org/10.1016/j.ijhydene.2017.03.046.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Castaings, A., A. Bouscayrol, W. Lhomme i R. Trigui. "Power Hardware-In-the-Loop simulation for testing multi-source vehicles". IFAC-PapersOnLine 50, nr 1 (lipiec 2017): 10971–76. http://dx.doi.org/10.1016/j.ifacol.2017.08.2469.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Guillo-Sansano, Efren, Mazheruddin H. Syed, Andrew J. Roscoe, Graeme M. Burt i Federico Coffele. "Characterization of Time Delay in Power Hardware in the Loop Setups". IEEE Transactions on Industrial Electronics 68, nr 3 (marzec 2021): 2703–13. http://dx.doi.org/10.1109/tie.2020.2972454.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Lentijo, S., S. D'Arco i A. Monti. "Comparing the Dynamic Performances of Power Hardware-in-the-Loop Interfaces". IEEE Transactions on Industrial Electronics 57, nr 4 (kwiecień 2010): 1195–207. http://dx.doi.org/10.1109/tie.2009.2027246.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Yue, Bonnie, i Amir Khajepour. "Hardware-in-the-loop for power level estimation of planetary rovers". International Journal of Vehicle Autonomous Systems 10, nr 4 (2012): 315. http://dx.doi.org/10.1504/ijvas.2012.051272.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Alessandri, Giacomo, Federico Gallorini, Luca Castellini, Dan El Montoya, Erick Fernando Alves i Elisabetta Tedeschi. "An innovative Hardware-In-the-Loop rig for linear PTO testing". International Marine Energy Journal 5, nr 3 (19.12.2022): 305–14. http://dx.doi.org/10.36688/imej.5.305-314.

Pełny tekst źródła

Streszczenie:

This paper describes the activities related to the design, manufacturing and commissioning of an innovative Hardware-In-the-Loop test rig for linear Power Take-Off testing. The rig is characterised by a fully coupled architecture in which three electro-mechanical units integrating a ballscrew and an electrical machine can actuate on a linear axis, either as motor or generator. A preliminary mechanical design of the test rig was carried out by identifying the most demanding conditions. The electrical and mechanical designs were assessed through a de-risking simulation of the overall test rig set-up, considering faults between the motors and respective power converters. The resulting rig setup includes a structure that embeds the three units, an electrical control panel and a control system. The use of electro-mechanical units increases the flexibility of the setup and simplifies the test of extreme conditions such as maximum output power or actuation force. Moreover, it allows reusing the power produced by the generating devices, thus reducing operational costs of the tests. The control system integrates a real-time hardware-in-the-loop simulation platform, a supervisory control and data acquisition systems. Those offer not only the possibility of easily tuning parameters but also testing new control strategies, operational situations, and failures of a power-take-off system in very realistic conditions.

Style APA, Harvard, Vancouver, ISO itp.

33

Soomro, Jahangir Badar, Faheem Akhtar Chachar, Hafiz Mudassir Munir, Jamshed Ahmed Ansari, Amr S. Zalhaf, Mohammed Alqarni i Basem Alamri. "Efficient Hardware-in-the-Loop and Digital Control Techniques for Power Electronics Teaching". Sustainability 14, nr 6 (16.03.2022): 3504. http://dx.doi.org/10.3390/su14063504.

Pełny tekst źródła

Streszczenie:

Power electronics is a core subject in electrical and electronics engineering at the undergraduate level. The rapid growth in the field of power electronics requires necessary changes in the curricula and practica for power electronics. The proposed next-generation power electronics teaching laboratory changes the learning paradigm for this subject and is for the first time used for teaching purposes in Pakistan. The proposed controller hardware-in-the-loop (CHIL) laboratory enabled students to design, control, and test power converters without the fear of component failure. CHIL setup allowed students to directly validate the physical controller without the need for any real power converter. This allowed students to obtain more repeatable results and perform extreme digital controller testing of power converters that are otherwise not possible on real hardware. Furthermore, students could start learning power electronics concepts with hardware from the beginning on a safe, versatile, fully interactive, and reconfigurable platform. The proposed laboratory meets the accreditation board for engineering and technology (ABET) student outcome criterion K such that students can continue with the same hardware and software toolset for graduate and research purposes. The knowledge and skills acquired during undergraduate years can help students create new solutions for power electronics systems and develop their expertise in the field of power electronics. The results obtained from the survey indicated that the majority of the students were satisfied with the laboratory setup. They also expressed appreciation over the provision of a high-level graphical language “LabVIEW” for the digital controllers compared to conventional low-level text-based languages such as VHDL, Verilog, C, or C++.

Style APA, Harvard, Vancouver, ISO itp.

34

Zhang,, Huisheng, Ming Su, and i Shilie Weng. "Hardware-in-the-Loop Simulation Study on the Fuel Control Strategy of a Gas Turbine Engine". Journal of Engineering for Gas Turbines and Power 127, nr 3 (24.06.2005): 693–95. http://dx.doi.org/10.1115/1.1805012.

Pełny tekst źródła

Streszczenie:

A hardware-in-the-loop simulation of a three-shaft gas turbine engine for ship propulsion was established. This system is composed of computers, actual hardware, measuring instruments, interfaces between actual hardware and computers, and a network for communication, as well as the relevant software, including mathematical models of the gas turbine engine. “Hardware-in-the-loop” and “volume inertia effects” are the two innovative features of this simulation system. In comparison to traditional methods for gas turbine simulation, the new simulation platform can be implemented in real time and also can test the physical hardware’s performance through their integration with the mathematical simulation model. A fuel control strategy for a three-shaft gas turbine engine, which can meet the requirement to the acceleration time and not exceeding surge line, was developed using this platform.

Style APA, Harvard, Vancouver, ISO itp.

35

Ihrens, Jana, Stefan Möws, Lennard Wilkening, Thorsten A. Kern i Christian Becker. "The Impact of Time Delays for Power Hardware-in-the-Loop Investigations". Energies 14, nr 11 (28.05.2021): 3154. http://dx.doi.org/10.3390/en14113154.

Pełny tekst źródła

Streszczenie:

Power hardware-in-the-loop (PHiL) simulations provide a powerful environment in the critical process of testing new components and controllers. In this work, we aim to explain the impact of time delays in a PHiL setup and recommend how to consider them in different investigations. The general concept of PHiL, with its necessary components, is explained and the benefits compared to pure simulation and implemented field tests are presented. An example for a flexible PHiL environment is shown in form of the Power Hardware-in-the-Loop Simulation Laboratory (PHiLsLab) at TU Hamburg. In the PHiLsLab, different hardware components are used as the simulator to provide a grid interface via an amplifier system, a real-time simulator by OPAL-RT, a programmable logic controller by Bachmann, and an M-DUINO microcontroller. Benefits and limitations of the different simulators are shown using case examples of conducted investigations. Essentially, all platforms prove to be appropriate and sufficiently powerful simulators, if the time constants and complexity of the investigated case fit the simulator performance. The communication interfaces used between simulator and amplifier system differ in communication speed and delay; therefore, they have to be considered to determine the level of dynamic interactions between the simulated rest of system and the hardware under test.

Style APA, Harvard, Vancouver, ISO itp.

36

Cabeza, Luisa F., David Verez i Mercè Teixidó. "Hardware-in-the-Loop Techniques for Complex Systems Analysis: Bibliometric Analysis of Available Literature". Applied Sciences 13, nr 14 (12.07.2023): 8108. http://dx.doi.org/10.3390/app13148108.

Pełny tekst źródła

Streszczenie:

Simulating complex systems in real time presents both significant advantages and challenges. Hardware-in-the-loop (HIL) simulation has emerged as an interesting technique for addressing these challenges. While HIL has gained attention in the scientific literature, its application in energy studies and power systems remains scattered and challenging to locate. This paper aims to provide an assessment of the penetration of the HIL technique in energy studies and power systems. The analysis of the literature reveals that HIL is predominantly employed in evaluating electrical systems (smart grids, microgrids, wind systems), with limited application in thermal energy systems (energy storage). Notably, the combination of electrical hardware-in-the-loop (EHIL) and thermal hardware-in-the-loop (THIL) techniques has found application in the assessment of vehicle thermal management systems and smart cities and, recently, has also been adopted in building systems. The findings highlight the potential for further exploration and expansion of the HIL technique in diverse energy domains, emphasizing the need for addressing challenges such as hardware–software compatibility, real-time data acquisition, and system complexity.

Style APA, Harvard, Vancouver, ISO itp.

37

Zhou, Yu, Jin Lin, Yonghua Song, Yu Cai i Hao Liu. "A power hardware-in-loop based testing bed for auxiliary active power control of wind power plants". Electric Power Systems Research 124 (lipiec 2015): 10–17. http://dx.doi.org/10.1016/j.epsr.2015.02.018.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Resch, Simon, Juliane Friedrich, Timo Wagner, Gert Mehlmann i Matthias Luther. "Stability Analysis of Power Hardware-in-the-Loop Simulations for Grid Applications". Electronics 11, nr 1 (21.12.2021): 7. http://dx.doi.org/10.3390/electronics11010007.

Pełny tekst źródła

Streszczenie:

Power Hardware-in-the-Loop (PHiL) simulation is an emerging testing methodology of real hardware equipment within an emulated virtual environment. The closed loop interfacing between the Hardware under Test (HuT) and the Real Time Simulation (RTS) enables a realistic simulation but can also result in an unstable system. In addition to fundamentals in PHiL simulation and interfacing, this paper therefore provides a consistent and comprehensive study of PHiL stability. An analytic analysis is compared with a simulative approach and is supplemented by practical validations of the stability limits in PHiL simulation. Special focus is given on the differences between a switching and a linear amplifier as power interface (PI). Stability limits and the respective factors of influence (e.g., Feedback Current Filtering) are elaborated with a minimal example circuit with voltage-type Ideal Transformer Model (ITM) PHiL interface algorithm (IA). Finally, the findings are transferred to a real low-voltage grid PHiL application with residential load and photovoltaic system.

Style APA, Harvard, Vancouver, ISO itp.

39

Reveillere, Adrien, Martin Longeon i Iacopo Rossi. "Dynamic simulation of a combined cycle for power plant flexibility enhancement". E3S Web of Conferences 113 (2019): 01005. http://dx.doi.org/10.1051/e3sconf/201911301005.

Pełny tekst źródła

Streszczenie:

System simulation is used in many fields to help design, control or troubleshoot various industrial systems. Within the PUMP-HEAT H2020 project, it is applied to a combined cycles power plant, with innovative layouts that include heat pumps and thermal storage to un-tap combined cycle potential flexibility through low-CAPEX balance of plant innovations. Simcenter Amesim software is used to create dynamic models of all subsystems and their interactions and validate them from real life data for various purpose. Simple models of the Gas Turbine (GT), the Steam loop, the Heat Recovery Steam Generator (HRSG), the Heat Pump and the Thermal Energy storage with Phase Change material are created for Pre-Design and concept validation and then scaled to more precise design. Control software and hardware is validated by interfacing them with detailed models of the virtual plant by Model in the Loop (MiL), Software in the Loop (SiL) and Hardware in the Loop (HiL) technologies. Unforeseen steady state and transient behaviours of the powerplant can be virtually captured, analysed, understood and solved. The purpose of this paper is to introduce the associated methodologies applied in the PUMP-HEAT H2020 project and their respective results.

Style APA, Harvard, Vancouver, ISO itp.

40

Kiesbye, Jonis, David Messmann, Maximilian Preisinger, Gonzalo Reina, Daniel Nagy, Florian Schummer, Martin Mostad, Tejas Kale i Martin Langer. "Hardware-In-The-Loop and Software-In-The-Loop Testing of the MOVE-II CubeSat". Aerospace 6, nr 12 (1.12.2019): 130. http://dx.doi.org/10.3390/aerospace6120130.

Pełny tekst źródła

Streszczenie:

This article reports the ongoing work on an environment for hardware-in-the-loop (HIL) and software-in-the-loop (SIL) tests of CubeSats and the benefits gained from using such an environment for low-cost satellite development. The satellite tested for these reported efforts was the MOVE-II CubeSat, developed at the Technical University of Munich since April 2015. The HIL environment has supported the development and verification of MOVE-II’s flight software and continues to aid the MOVE-II mission after its launch on 3 December 2018. The HIL environment allows the satellite to interact with a simulated space environment in real-time during on-ground tests. Simulated models are used to replace the satellite’s sensors and actuators, providing the interaction between the satellite and the HIL simulation. This approach allows for high hardware coverage and requires relatively low development effort and equipment cost compared to other simulation approaches. One key distinction from other simulation environments is the inclusion of the electrical domain of the satellite, which enables accurate power budget verification. The presented results include the verification of MOVE-II’s attitude determination and control algorithms, the verification of the power budget, and the training of the operator team with realistic simulated failures prior to launch. This report additionally presents how the simulation environment was used to analyze issues detected after launch and to verify the performance of new software developed to address the in-flight anomalies prior to software deployment.

Style APA, Harvard, Vancouver, ISO itp.

41

Potashov, I. S., i A. I. Bokarev. "Hardware in the loop simulation technology evaluation method for power steering systems". Journal of Physics: Conference Series 2061, nr 1 (1.10.2021): 012137. http://dx.doi.org/10.1088/1742-6596/2061/1/012137.

Pełny tekst źródła

Streszczenie:

Abstract In the paper, the method of measuring and assessing of steering systems with the help of test benches with HILS technology implementation is justified in part of the adaptive algorithms of the regulation of the assistant steering torque. In the article, overall principal of creating virtual – physical system using as a physical part the rack and pinion steering system with electromechanical assistant is described. Interaction of the physical and virtual parts and fields of usage are described. Development, calibration and tweaking of the newly designed ECU and adaptive algorithms suppose a lot of testing. Time consumption and difficultness can be reduced only by the way of carrying out bench tests with usage of HILS technology.

Style APA, Harvard, Vancouver, ISO itp.

42

Tong, Heqin, Ming Ni, Lili Zhao i Manli Li. "Flexible hardware-in-the-loop testbed for cyber physical power system simulation". IET Cyber-Physical Systems: Theory & Applications 4, nr 4 (1.12.2019): 374–81. http://dx.doi.org/10.1049/iet-cps.2019.0001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Palmintier, Bryan, Blake Lundstrom, Sudipta Chakraborty, Tess Williams, Kevin Schneider i David Chassin. "A Power Hardware-in-the-Loop Platform With Remote Distribution Circuit Cosimulation". IEEE Transactions on Industrial Electronics 62, nr 4 (kwiecień 2015): 2236–45. http://dx.doi.org/10.1109/tie.2014.2367462.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Viehweider, Alexander, Georg Lauss i Lehfuss Felix. "Stabilization of Power Hardware-in-the-Loop simulations of electric energy systems". Simulation Modelling Practice and Theory 19, nr 7 (sierpień 2011): 1699–708. http://dx.doi.org/10.1016/j.simpat.2011.04.001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Paran, Sanaz, Tuyen V. Vu, Fernand Diaz Franco i Chris S. Edrington. "Evaluation of the Interface Accuracy for Power Hardware-in-the-Loop Experiments". Electric Power Components and Systems 45, nr 7 (12.04.2017): 763–73. http://dx.doi.org/10.1080/15325008.2017.1294634.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Allegre, A. L., A. Bouscayrol, J. N. Verhille, P. Delarue, E. Chattot i S. El-Fassi. "Reduced-Scale-Power Hardware-in-the-Loop Simulation of an Innovative Subway". IEEE Transactions on Industrial Electronics 57, nr 4 (kwiecień 2010): 1175–85. http://dx.doi.org/10.1109/tie.2009.2029519.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Faruque, M. O. O., i V. Dinavahi. "Hardware-in-the-Loop Simulation of Power Electronic Systems Using Adaptive Discretization". IEEE Transactions on Industrial Electronics 57, nr 4 (kwiecień 2010): 1146–58. http://dx.doi.org/10.1109/tie.2009.2036647.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Liu, Chen, Rui Ma, Hao Bai, Zhongliang Li, Franck Gechter i Fei Gao. "Hybrid modeling of power electronic system for hardware-in-the-loop application". Electric Power Systems Research 163 (październik 2018): 502–12. http://dx.doi.org/10.1016/j.epsr.2018.06.018.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Ostadrahimi, Amir, i Stefano Bifaretti. "Hardware-in-the-Loop Implementation of ROMAtrix, a Smart Transformer for Future Power Grids". Machines 11, nr 2 (19.02.2023): 308. http://dx.doi.org/10.3390/machines11020308.

Pełny tekst źródła

Streszczenie:

The evolution of power generation brings about extensive changes in other parts of the grid, especially in the transmission and distribution components. Within the scope of the Internet of Energy (IoE), electric power flows more flexibly between different parts of the grid. DC power will play an essential role in IoE. Decentralized photovoltaic panels, energy storage, electric vehicle charging stations, and data centers are some of the significant components of future grids dealing with DC power. As a result, power transformers must be appropriately modified to manage power among the different parts of the grid. A power electronic transformer (PET), also known as a solid-state transformer (SST) or smart transformer (ST), is a solution enabling a power grid to deal with this growing complexity. ROMAtrix, as a matrix-converter-based ST, is a developing project targeting future power grids. ROMAtrix realizes the application of a medium voltage (MV) transformer using commercially available power electronic semiconductors. Due to the distinctive features of ROMAtrix and a high number of switches, the implementation of the control system using a single control board is highly demanding. This paper aims to illustrate the implementation, on a field-programmable gate array (FPGA), of pulse width modulation (SVMPWM) applied to the ROMAtrix, considering specific switching patterns. The proposed switching procedure was simulated with PLECS and validated with the hardware-in-the-loop using the OPAL-RT solver.

Style APA, Harvard, Vancouver, ISO itp.

50

Schaarschmidt, Marco, Michael Uelschen i Elke Pulvermüller. "Hunting Energy Bugs in Embedded Systems: A Software-Model-In-The-Loop Approach". Electronics 11, nr 13 (21.06.2022): 1937. http://dx.doi.org/10.3390/electronics11131937.

Pełny tekst źródła

Streszczenie:

Power consumption has become a major design constraint, especially for battery-powered embedded systems. However, the impact of software applications is typically considered in later phases, where both software and hardware parts are close to their finalization. Power-related issues must be detected in early stages to keep the development costs low, satisfy time-to-market, and avoid cost-intensive redesign loops. Moreover, the variety of hardware components, architectures, and communication interfaces make the development of embedded software more challenging. To manage the complexity of software applications, approaches such as model-driven development (MDD) may be used. This article proposes a power-estimation approach in MDD for software application models in early development phases. A unified modeling language (UML) profile is introduced to model power-related properties of hardware components. To determine the impact of software applications, we defined two analysis methods using simulation data and a novel in-the-loop concept. Both methods may be applied at different development stages to determine an energy trace, describing the energy-related behavior of the system. A novel definition of energy bugs is provided to describe power-related misbehavior. We apply our approach to a sensor node example, demonstrate an energy bug detection, and compare the runtime and accuracy of the analysis methods.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!