Gotowa bibliografia na temat „Power cone”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Power cone”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Power cone"

1

Viswanath, G., i T. V. Sreenivas. "Cone-kernel representation versus instantaneous power spectrum". IEEE Transactions on Signal Processing 47, nr 1 (1999): 250–54. http://dx.doi.org/10.1109/78.738265.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Soni, R. K., V. K. Mandloie, M. B. Pote i A. K. Nath. "Spinning cone water film power meter for high-power CO2 lasers". Optics & Laser Technology 39, nr 1 (luty 2007): 196–201. http://dx.doi.org/10.1016/j.optlastec.2005.03.003.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kyrala, G. A., A. Seifter, J. L. Kline, S. R. Goldman, S. H. Batha i N. M. Hoffman. "Tuning indirect-drive implosions using cone power balance". Physics of Plasmas 18, nr 7 (lipiec 2011): 072703. http://dx.doi.org/10.1063/1.3598179.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Hien, Le Thi Khanh. "Differential properties of Euclidean projection onto power cone". Mathematical Methods of Operations Research 82, nr 3 (16.09.2015): 265–84. http://dx.doi.org/10.1007/s00186-015-0514-0.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kim, Sungjun, Sunghun Jung, Min-Hwi Kim, Tae-Hyeon Kim, Suhyun Bang, Seongjae Cho i Byung-Gook Park. "Nano-cone resistive memory for ultralow power operation". Nanotechnology 28, nr 12 (23.02.2017): 125207. http://dx.doi.org/10.1088/1361-6528/aa5e72.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Murmu, Chandra Shekhar, Suman Majumdar i Kanan K. Datta. "C ii and H i 21-cm line intensity mapping from the EoR: impact of the light-cone effect on auto and cross-power spectra". Monthly Notices of the Royal Astronomical Society 507, nr 2 (17.08.2021): 2500–2509. http://dx.doi.org/10.1093/mnras/stab2347.

Pełny tekst źródła
Streszczenie:
ABSTRACT C ii line intensity mapping (LIM) is a potential technique to probe the early galaxies from the Epoch of Reionization (EoR). Several experiments e.g. CONCERTO, TIME, CCAT-p are underway to map the C ii LIM signal fluctuations from the EoR, enabling us to estimate the C ii power-spectrum and C ii × 21-cm cross-power spectrum. The observed LIM signal will have its time evolution embedded in it along the line of sight due to the finite traveltime of the signal from its origin to the observer. We have investigated this so-called light-cone effect on the observed statistics of our seminumerically simulated C ii signal from the EoR. Using a suit of simulated C ii and neutral hydrogen 21-cm maps and corresponding light-cone boxes, we have shown that the light-cone effect can impact the C ii power spectrum by more than 15 per cent at large scales ($k\sim 0.1\, \text{Mpc}^{-1}$, at $z$ = 6.8). We have also observed that the impact of light-cone effect on the C ii power spectrum drops with decreasing redshift within the redshift range considered here (7.2 ≲ $z$ ≲ 6). The C ii × 21-cm cross-power spectrum is also affected by light cone, and in our models where reionization ends before $z$ = 6, we find that the maximum impact on cross-power can reach up to 20 per cent. At $z$ = 6.4, we find comparatively pronounced variation in the light-cone effect with reionization history on the cross-power. Faster reionization histories have a more drastic light-cone effect on cross-power. We conclude that we need to incorporate the light cone in order to properly model the signal, constrain the EoR-related astrophysical parameters and reionization history using the C ii × 21-cm cross-power spectrum.
Style APA, Harvard, Vancouver, ISO itp.
7

Dhurandhar, Akshay S., i Amarsingh B. Kanase-Patil. "Experimental Study on Effect of Water Spray Characteristics on Performance of Cooling Tower". E3S Web of Conferences 170 (2020): 01009. http://dx.doi.org/10.1051/e3sconf/202017001009.

Pełny tekst źródła
Streszczenie:
Cooling tower is an indispensable part, used as a direct contact type heat exchanger mainly for evaporative cooling. Cooling tower generally dissipates, remove heat from thermal power plants. In an induced draft cooling tower of counter flow, used for a mini-steam power plant, hot water enters at the top, while the air is introduced at the bottom and exits at the top, air is allowed to come in contact with falling water droplets, causing evaporative cooling. A possibility of desired change with different spray angle, patterns, is tried and analysed. On findings, best suited spray nozzle angle resulted is 90°, and amongst three spray patterns, full cone, hollow cone and spiral type nozzle; full cone nozzle of 90° spray angle helps achieving efficiency up to 82%. The range increases successively from 9.8°C to 15.5°C for FC nozzle, in approach to WBT; the desirable fall of 3.56°C is attained with effectiveness of 81.63%.
Style APA, Harvard, Vancouver, ISO itp.
8

Pratiwi, Febrianti Zarra, Hari Setijono i Yusuf Fuad. "Effect of Plyometric Front Cone Hops Training and Counter Movement Jump Training to Power and Strenght of Leg Muscles". Jurnal SPORTIF : Jurnal Penelitian Pembelajaran 4, nr 1 (27.05.2018): 105. http://dx.doi.org/10.29407/js_unpgri.v4i1.12073.

Pełny tekst źródła
Streszczenie:
The purpose of this research is to increase performance athletes bolavoli and that basketball with the methods exercise plyometric front cone hops and plyometric counter movement jump. Thirty students who elected in accordance criteria will be conducted pretest to determine division of a group plyometric front cone hops, plyometric counter movement jump or the control group. Back leg dynamometer to measure the muscle power limbs and jump md to measure the power limb muscles.Will be given exercise for 6 weeks to masing-masing groups and treatment 3 times a week. Test results paired sample t-test show a method of exercise plyometric front cone hops significant influence on the variables of strength and power limb muscles, group plyometric counter movement jump significant influence on the variables of power limb muscles. It can be concluded that of the exercise plyometric front cone hops and plyometric counter movement jump more effective for the two components of the physical condition of strength and power limb muscles.
Style APA, Harvard, Vancouver, ISO itp.
9

TANAKA, Hirohisa. "Power transmission of a cone roller toroidal traction drive." JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry 32, nr 1 (1989): 82–90. http://dx.doi.org/10.1299/jsmec1988.32.82.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

NAKANO, Keiichi, Yoshikazu TANAKA, Takashi MATSUOKA, Kazuhiko SAKAGUCHI i Kikuo OKAMURA. "Power Transfer Characteristic of Ring-Cone 3K Type CVT". Transactions of the Japan Society of Mechanical Engineers Series C 72, nr 714 (2006): 628–35. http://dx.doi.org/10.1299/kikaic.72.628.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Rozprawy doktorskie na temat "Power cone"

1

Vilches, Freixas Gloria. "Dual-energy cone-beam CT for proton therapy". Thesis, Lyon, 2017. http://www.theses.fr/2017LYSEI099/document.

Pełny tekst źródła
Streszczenie:
La proton thérapie est une modalité de traitement du cancer qu’utilise des faisceaux de protons. Les systèmes de planification de traitement actuels se basent sur une image de l’anatomie du patient acquise par tomodensitométrie. Le pouvoir d’arrêt des protons relatif à l’eau (Stopping Power Ratio en Anglais, SPR) est déterminé à partir des unités Hounsfield (Hounsfield Units en Anglais, HU) pour calculer la dose absorbée au patient. Les protons sont plus vulnérables que les photons aux modifications du SPR du tissu dans la direction du faisceau dues au mouvement, désalignement ou changements anatomiques. De plus, les inexactitudes survenues de la CT de planification et intrinsèques à la conversion HU-SPR contribuent énormément à l’incertitude de la portée des protons. Dans la pratique clinique, au volume de traitement s’ajoutent des marges de sécurité pour tenir en compte ces incertitudes en détriment de perdre la capacité d’épargner les tissus autour de la tumeur. L’usage de l’imagerie bi-énergie en proton thérapie a été proposé pour la première fois en 2009 pour mieux estimer le SPR du patient par rapport à l’imagerie mono-énergie. Le but de cette thèse est d’étudier la potentielle amélioration de l’estimation du SPR des protons en utilisant l’imagerie bi-énergie, pour ainsi réduire l’incertitude dans la prédiction de la portée des protons dans le patient. Cette thèse est appliquée à un nouveau système d’imagerie, l’Imaging Ring (IR), un scanner de tomodensitométrie conique (Cone-Beam CT en Anglais, CBCT) développé pour la radiothérapie guidée par l’image. L’IR est équipé d’une source de rayons X avec un système d’alternance rapide du voltage, synchronisé avec une roue contenant des filtres de différents matériaux que permet des acquisitions CBCT multi-énergie. La première contribution est une méthode pour calibrer les modèles de source et la réponse du détecteur pour être utilisés en simulations d’imagerie X. Deuxièmement, les recherches ont évalué les facteurs que peuvent avoir un impact sur les résultats du procès de décomposition bi-énergie, dès paramètres d’acquisition au post-traitement. Les deux domaines, image et basée en la projection, ont été minutieusement étudiés, avec un spéciale accent aux approches basés en la projection. Deux nouvelles bases de décomposition ont été proposées pour estimer le SPR, sans avoir besoin d’une variable intermédiaire comme le nombre atomique effectif. La dernière partie propose une estimation du SPR des fantômes de caractérisation tissulaire et d’un fantôme anthropomorphique à partir d’acquisitions avec l’IR. Il a été implémentée une correction du diffusé, et il a été proposée une routine pour interpoler linéairement les sinogrammes de basse et haute énergie des acquisitions bi-énergie pour pouvoir réaliser des décompositions en matériaux avec données réelles. Les valeurs réconstruits du SPR ont été comparées aux valeurs du SPR expérimentales déterminés avec un faisceau d’ions de carbone
Proton therapy is a promising radiation treatment modality that uses proton beams to treat cancer. Current treatment planning systems rely on an X-ray computed tomography (CT) image of the patient's anatomy to design the treatment plan. The proton stopping-power ratio relative to water (SPR) is derived from CT numbers (HU) to compute the absorbed dose in the patient. Protons are more vulnerable than photons to changes in tissue SPR in the beam direction caused by movement, misalignment or anatomical changes. In addition, inaccuracies arising from the planning CT and intrinsic to the HU-SPR conversion greatly contribute to the proton range uncertainty. In clinical practice, safety margins are added to the treatment volume to account for these uncertainties at the expense of losing organ-sparing capabilities. The use of dual-energy (DE) in proton therapy was first suggested in 2009 to better estimate the SPR with respect to single-energy X-ray imaging. The aim of this thesis work is to investigate the potential improvement in determining proton SPR using DE to reduce the uncertainty in predicting the proton range in the patient. This PhD work is applied to a new imaging device, the Imaging Ring (IR), which is a cone-beam CT (CBCT) scanner developed for image-guided radiotherapy (IGRT). The IR is equipped with a fast kV switching X-ray source, synchronized with a filter wheel, allowing for multi-energy CBCT imaging. The first contribution of this thesis is a method to calibrate a model for the X-ray source and the detector response to be used in X-ray image simulations. It has been validated experimentally on three CBCT scanners. Secondly, the investigations have evaluated the factors that have an impact on the outcome of the DE decomposition process, from the acquisition parameters to the post-processing. Both image- and projection-based decomposition domains have been thoroughly investigated, with special emphasis on projection-based approaches. Two novel DE decomposition bases have been proposed to estimate proton SPRs, without the need for an intermediate variable such as the effective atomic number. The last part of the thesis proposes an estimation of proton SPR maps of tissue characterization and anthropomorphic phantoms through DE-CBCT acquisitions with the IR. A correction for X-ray scattering has been implemented off-line, and a routine to linearly interpolate low-energy and high-energy sinograms from sequential and fast-switching DE acquisitions has been proposed to perform DE material decomposition in the projection domain with real data. DECT-derived SPR values have been compared with experimentally-determined SPR values in a carbon-ion beam
Style APA, Harvard, Vancouver, ISO itp.
2

Burdette, Matthew E. "Theology for the revolution : a study of the political eschatologies of Robert W. Jenson and James H. Cone". Thesis, University of Aberdeen, 2016. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=230704.

Pełny tekst źródła
Streszczenie:
The theologies of Robert W. Jenson and James H. Cone have not been interpreted together. This thesis argues that the two theologians are profoundly similar. The study argues that Jenson's and Cone's theologies converge in such manner that they may be described as sharing a common task; namely, the development of a theology of revolution. 'Theology of revolution' denotes both a doctrine of God that is metaphysically revolutionary, and a theology that enables revolutionary politics. Specifically, both theologians diagnose a problem with Christian theology, and their diagnoses are finally the same: theology has inherited from Greek theology assumptions about deity that construe eternity and time as contradictory, resulting in an abstraction from historical life, and a denigration of historical particularity, contingency, and concreteness. In Cone's analysis, white supremacy, as well as a heretical Christology, emerges from this theological assumption; in Jenson's analysis, oppressive political ideologies and inadequately orthodox Christology emerges from this inherited Hellenistic assumption. For both theologians, at stake is Christian eschatology, which, for both, is determinative of political life. Jenson and Cone alike argue that the God of Jesus is the God of history, and is therefore the God of eschatological revolution who enables and inspires revolutionary politics in history. Cone's theology has extensively developed a politics of this eschatology, but has insufficiently developed its corresponding metaphysics; Jenson has devoted enormous energy to developing the revisionary metaphysics of the gospel, arguing that the gospel's God is revolutionary, but has only occasionally addressed politics, and has largely neglected the implications of his theology for the problem of white supremacy. This study argues that just as Jenson's and Cone's theological programmes converge, their theologies are also mutually corrective for one another, enabling one another to better articulate a theology of revolution. Chapter One will address the theological and political context out of which Cone's theology arises, clarifying the theological and political programmes to which Cone is reacting in order to identify the revolutionary intentions of his theology. Chapter Two argues that political concerns partially occasion Jenson's theology, and that his occasional political writings that propose a revolutionary politics are constitutive of his effort to develop a revisionary metaphysics. Chapter Three explicates Cone's eschatological doctrine of God, in which God is the eschatological revolution, by means of analysing Cone's Christology. Chapter Four develops Jenson's proposal for a revolutionary politics, analysing how this proposal arises from his eschatological doctrine of God. Chapter Five analyses how Cone's proposal for a revolutionary 'Black Power' politics is a broader proposal for a revolutionary eschatology, in which eternity is the revolutionary fulfilment of time in the future. Chapter Six elaborates Jenson's revisionary metaphysics by explicating his Christology, showing how this Christology results in a revolutionary, eschatological doctrine of God. The Conclusion of the study restates and clarifies the argument of the study, that Jenson and Cone have developed a mutually corrective theology of revolution.
Style APA, Harvard, Vancouver, ISO itp.
3

Liu, Ming. "Power and code management in wireless networks". Connect to resource, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1118933878.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--Ohio State University, 2005.
Title from first page of PDF file. Document formatted into pages; contains xvi, 158 p.; also includes graphics. Includes bibliographical references (p. 147-158). Available online via OhioLINK's ETD Center
Style APA, Harvard, Vancouver, ISO itp.
4

Bao, Wenlei. "Power Aware WCET Analysis". The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1398937286.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

虞愛 i Ai Yu. "A study of power control in CDMA overlay". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31241293.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Yu, Ai. "A study of power control in CDMA overlay /". Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B22926033.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Nourizadeh, Sam. "Power control techniques for CDMA-based mobile systems". Thesis, University of Surrey, 2003. http://epubs.surrey.ac.uk/844068/.

Pełny tekst źródła
Streszczenie:
Code division multiple access (CDMA) is a well-known radio communication technique that allows multiple users to share the same spectrum simultaneously. It is an alternative to frequency division and time division multiple access scheme. Its numerous advantages have merited being the main air-interface choice for the third generation (3G) mobile communication system. Nevertheless, due to the use of same frequency, the capacity of CDMA air-interface is interference limited. This problem is minimised by use of power control scheme. Power Control reduces the interference in the system by adjusting the transmitted power according to the received Signal-to-Interference (SIR) ratio. The main difficulty to achieve this scheme is that mobile terminals experience different radio propagation channel. For success completion of this task, two objectives have been identified for power control. First assure that the received signal matches the required SIR at physical layer and secondly adjust the required SIR of users at system layer to an acceptable value so that the terminals in the system are capable of achieving. In this thesis both objectives are discussed and analysed through analytical and simulation methods. At physical layer, two analytical methods based on non-linear control theory are proposed to combat the fast fading channel propagation. The proposed methods are a fast solution to assess the performance of the Closed Loop Power Control compared to the usual lengthy simulation process. At system level, a new distributed power algorithm for reverse link that adjusts the SIR target of the mobile terminal at the base station is proposed. This algorithm brings the performance of the distributed algorithm closer to the optimal solution provided by the non-feasible centralised power control algorithm in current technology.
Style APA, Harvard, Vancouver, ISO itp.
8

Parra, Avila Benigno Rafael. "On Rational and Periodic Power Series and on Sequential and Polycyclic Error-Correcting Codes". Ohio University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1257886601.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kwak, Yongjun. "Near Shannon Limit and Reduced Peak to Average Power Ratio Channel Coded OFDM". Thesis, Harvard University, 2012. http://dissertations.umi.com/gsas.harvard:10176.

Pełny tekst źródła
Streszczenie:
Solutions to the problem of large peak to average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems are proposed. Although the design of PAPR reduction codewords has been extensively studied and the existence of asymptotically good codes with low PAPR has been proved, still no reduced PAPR capacity achieving code has been constructed. This is the topic of the current thesis.This goal is achieved by implementing a time-frequency turbo block coded OFDM. In this scheme, we design the frequency domain component code to have a PAPR bounded by a small number. The time domain component code is designed to obtain good performance while the decoding algorithm has reasonable complexity. Through comparative numerical evaluation we show that our method achieves considerable improvement in terms of PAPR with slight performance degradation compared to capacity achieving codes with similar block lengths. For the frequency domain component code, we used the realization of Golay sequences as cosets of the fi rst order Reed-Muller code and the modi cation of dual BCH code. A simple MAP decoding algorithm for the modi ed dual BCH code is also provided. Finally, we provide a flexible and practical scheme based on probabilistic approach to a PAPR problem. This approach decreases the PAPR without any signi cant performance loss and without any adverse impact or required change to the system.
Engineering and Applied Sciences
Style APA, Harvard, Vancouver, ISO itp.
10

Makido, Satoshi, Takaya Yamazato, Masaaki Katayama i Akira Ogawa. "Hierarchical Transmission of Huffman Code Using Multi-Code/Multi-Rate DS/SS Modulation with Appropriate Power Control". IEICE, 1998. http://hdl.handle.net/2237/7208.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Power cone"

1

Power in the Southern Cone borderlands: An anthropology of development practice. Westport, Conn: Bergin & Garvey, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Garrioch, Stephen Hugh. A finite element study of power-law fluids in cone flow. Ottawa: National Library of Canada, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

AI-5: A opressão no Brasil : um repórter nos bastidores políticos das ditaduras do Cone Sul. Rio de Janeiro: Editora Record, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Truppi, Lawrence E. A computer data base from EPA's complex terrain field studies: Description of a SAS computer data base from tracer field studies at Cinder Cone Butte, ID, Hogback Ridge, NM, and the Tracy Power Plant, NV. Research Triangle Park, NC: U.S. Environmental Protection Agency, Atmospheric Sciences Research Laboratory, 1988.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Codes of power. London: Hodder Mobius, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Carroll, Dyer E. The ASME code simplified: Power boilers. New York: McGraw Hill, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Power Rangers mystic force: Code busters. New York: Scholastic Inc., 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Moser, Patrick (Patrick J.), 1963-, red. The code: The power of "I will". Layton, Utah: Gibbs Smith, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Knoepfel, Heinz. Energy 2000: An overview of the world's energy resources in the decades to come. New York: Gordon and Breach Science Publishers, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Institute of Electrical and Electronics Engineers., red. National electrical safety code. Wyd. 2. New York, NY: IEEE, 2002.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Power cone"

1

Calvert, Peter. "British Relations with the Southern Cone States". W Great Power Relations in Argentina, Chile and Antarctica, 41–58. London: Palgrave Macmillan UK, 1990. http://dx.doi.org/10.1007/978-1-349-10075-0_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Marchesini, Giuseppe. "Power Terms in QCD Hard Processes and Running Coupling". W New Non-Perturbative Methods and Quantization on the Light Cone, 213–17. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-662-08973-6_25.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sun, Xinjie, Jiangping Jing, Zhangliang Shen i Liudong Zhang. "Second-Order Cone Based Dynamic Reconfiguration of Distribution Networks". W Conference Proceedings of 2022 2nd International Joint Conference on Energy, Electrical and Power Engineering, 542–52. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-4334-0_68.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Dorfman, Adriana. "Smuggling: Power Networks, Moral Geographies and Norm Enforcement at Work at Southern Cone Borders". W Borderities and the Politics of Contemporary Mobile Borders, 171–87. London: Palgrave Macmillan UK, 2015. http://dx.doi.org/10.1057/9781137468857_10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Akpan-Obong, Patience I., i Mary Jane C. Parmentier. "Coordination, Convergence or Contradiction: Information and Communication Technologies for Integration and Development in Southern Africa and the Southern Cone". W The Rise of Technological Power in the South, 300–319. London: Palgrave Macmillan UK, 2010. http://dx.doi.org/10.1057/9780230276123_16.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Buhring, Kurt. "Why Divine Goodness or Power? Why God? Why Liberation?: Critiques and Affirmations of James Cone". W Conceptions of God, Freedom, and Ethics in African American and Jewish Theology, 61–83. New York: Palgrave Macmillan US, 2008. http://dx.doi.org/10.1057/9780230611849_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Sun, Guo, i Jianfeng Ren. "CVaR-Based Formulation for Stochastic Extended Vertical Second-Order-Cone Linear Complementarity Problems and Applications in Optimal Power Flow in Networks". W Lecture Notes in Electrical Engineering, 509–18. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3951-0_56.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Sieren, Frank. "The Decline of Power". W The China Code, 56–78. London: Palgrave Macmillan UK, 2007. http://dx.doi.org/10.1057/9780230625082_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Leung, Tim. "Building Reusable Code Components". W Beginning Power Apps, 715–47. Berkeley, CA: Apress, 2021. http://dx.doi.org/10.1007/978-1-4842-6683-0_22.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Boukalas, Christos. "Medical power". W Biosecurity, Economic Collapse, the State to Come, 15–21. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003302988-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Power cone"

1

Markov, Georgi, i Ekaterinoslav Sirakov. "Near Region Acoustic Driver Circular Cone". W 2019 16th Conference on Electrical Machines, Drives and Power Systems (ELMA). IEEE, 2019. http://dx.doi.org/10.1109/elma.2019.8771516.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Haijun Xing, Haozhong Cheng, Libo Zhang, Shengxi Zhang i Yi Zhang. "Second-Order Cone model for Active Distribution Network Expansion Planning". W 2015 IEEE Power & Energy Society General Meeting. IEEE, 2015. http://dx.doi.org/10.1109/pesgm.2015.7286204.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Long, Christopher A., Alan B. Turner, Guven Kais, Kok M. Tham i John A. Verdicchio. "Measurement and CFD Prediction of the Flow Within an H.P. Compressor Drive Cone". W ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30239.

Pełny tekst źródła
Streszczenie:
In some gas turbine aeroengines, the H.P. compressor is driven by the H.P. turbine through a conical shaft or drive cone. This drive cone is enclosed by a stationary surface that forms the supporting material for the combustion chambers. Air used to cool the turbine blades is directed into the space around the drive cone, and a major concern to an engine designer is the temperature rise in this air due to frictional dissipation and heat transfer. This paper presents results from a combined experimental and CFD investigation into the flow within an engine representative H.P. compressor drive cone cavity. The experimental results show similarities in flow structure to that found in classic rotor-stator systems. Both 2D and 3D CFD simulations were carried out using the FLUENT/UNS code. The 3D model which included the actual compressor blade tip clearance gave the best agreement with the experimental data. However, the computational resource required to run the 3D model limits its practical use. The 2D CFD model, however, was found to give good agreement with experiment, providing care was exercised in selecting an appropriate value of initial tangential velocity.
Style APA, Harvard, Vancouver, ISO itp.
4

Man, Xu, Zhang Ruifang, Dai Mengdi, Xu Jian i Liao Siyang. "New Energy Reactive Power Optimization Based on Second-order Cone Programming". W 2021 IEEE Sustainable Power and Energy Conference (iSPEC). IEEE, 2021. http://dx.doi.org/10.1109/ispec53008.2021.9735988.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Coletta, Nancy J., i David R. Williams. "Psychophysical estimate of parafoveal cone spacing". W OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1986. http://dx.doi.org/10.1364/oam.1986.thi2.

Pełny tekst źródła
Streszczenie:
Over a narrow range of spatial frequencies higher than the parafoveal resolution limit, interference fringes can appear as striated patterns whose predominant orientation is perpendicular to the actual fringe orientation. This finding has been confirmed with a forced-choice orientation identification procedure. Aliasing by the parafoveal cone mosaic may explain this orientation reversal at high spatial frequencies. In these conditions, the power spectra of fringes sampled by the irregular cone mosaic contain low frequencies whose overall orientation is perpendicular to the fringe orientation. This happens only when the fringe period equals the average spacing of cones. In our measurements at various retinal eccentricities, the fringe period that produces the orientation reversal agrees with the anatomical measures of cone spacing of Osterberg1 which suggests that the alias arises in cones.
Style APA, Harvard, Vancouver, ISO itp.
6

Mototani, Suguru, Ryo Yamamoto, Kae Doki i Akihiro Torii. "Possibility of the Undersea Wireless Power Transfer Using a Cone Spiral Coil". W 2020 IEEE Wireless Power Transfer Conference (WPTC). IEEE, 2020. http://dx.doi.org/10.1109/wptc48563.2020.9295537.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Bunaiyan, Amin, Miguel Carrasco i Fernando Mancilla-David. "Numerical assessment of second order cone relaxation for distribution optimal power flow problems". W 2016 North American Power Symposium (NAPS). IEEE, 2016. http://dx.doi.org/10.1109/naps.2016.7747964.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Bishop, Kristen, i William Allan. "Effects of Fuel Nozzle Condition on Gas Turbine Combustion Chamber Exit Temperature Distributions". W ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-23441.

Pełny tekst źródła
Streszczenie:
The effects of fuel nozzle condition on the temperature distributions experienced by the nozzle guide vanes have been investigated using an optical patternator. Average spray cone angle, symmetry, and fuel streaks were quantified. An ambient pressure and temperature combustion chamber test rig was used to capture exit temperature distributions and to determine the pattern factor. The rig tests matched representative engine operating conditions by matching Mach number, equivalence ratio, and fuel droplet size. It was observed that very small deviations (± 10° in spray cone angle) from a nominal distribution in the fuel nozzle spray pattern correlated to increases in pattern factor, apparently due to a degradation of mixing processes, which created larger regions of very high temperature core flow and smaller regions of cooler temperatures within the combustion chamber exit plane. The spray cone angle had the most measureable influence while the effects of spray roundness and streak intensity had slightly less influence. Comparisons were made with published studies conducted on the combustion chamber geometry, and recommendations were made for fuel nozzle inspections.
Style APA, Harvard, Vancouver, ISO itp.
9

Wang, Fengyue, Jiayi Hu i Fangzong Wang. "Optimal Placement of Distributed Generations Using Second-Order Cone Programming". W 2012 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2012. http://dx.doi.org/10.1109/appeec.2012.6307484.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Nguyen, Hieu, Duong Nguyen, Anh Phuong Ngo i Christan Thomas. "Solar PV Modeling with Lambert W Function: An Exponential Cone Programming Approach". W 2022 IEEE Kansas Power and Energy Conference (KPEC). IEEE, 2022. http://dx.doi.org/10.1109/kpec54747.2022.9814756.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Power cone"

1

Kevin C. Galbreath, Donald L. Toman i Christopher J. Zygarlicke. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE. Office of Scientific and Technical Information (OSTI), wrzesień 1999. http://dx.doi.org/10.2172/824926.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Rebane, Aleksander. Two-Photon Porphyrin Core Dendrimers for Optical Power Limiting. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2006. http://dx.doi.org/10.21236/ada495180.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Wiles, J. Photovoltaic power systems and the National Electrical Code: Suggested practices. Office of Scientific and Technical Information (OSTI), grudzień 1996. http://dx.doi.org/10.2172/486131.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

WILES, JOHN. Photovoltaic Power Systems and the National Electrical Code: Suggested Practices. Office of Scientific and Technical Information (OSTI), marzec 2001. http://dx.doi.org/10.2172/808812.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Tunc ALdemir, Don Miller i Peng Wang. Development of An On-Line, Core Power Distribution Monitoring System. Office of Scientific and Technical Information (OSTI), październik 2007. http://dx.doi.org/10.2172/920987.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Galbreath, K. C. Reducing power production costs by utilizing petroleum coke. Annual report. Office of Scientific and Technical Information (OSTI), lipiec 1998. http://dx.doi.org/10.2172/666276.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Thacker, L. . In-Core Flux/Power Distribution Detectors: A Comparison of Types. Office of Scientific and Technical Information (OSTI), grudzień 1990. http://dx.doi.org/10.2172/1869087.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Anderson, J., E. Hagen i T. Morelock. Summary of inadequate core cooling instrumentation for US nuclear power plants. Office of Scientific and Technical Information (OSTI), lipiec 1990. http://dx.doi.org/10.2172/6791562.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Qamhia, Issam, Erol Tutumluer i Han Wang. Aggregate Subgrade Improvements Using Quarry By-products: A Field Investigation. Illinois Center for Transportation, czerwiec 2021. http://dx.doi.org/10.36501/0197-9191/21-017.

Pełny tekst źródła
Streszczenie:
This report presents a case study for constructing aggregate subgrade improvement (ASI) layers using quarry by-product aggregates (QBA), a quarry mix of large primary crushed rocks (PCR) and sand-sized quarry fines. The construction took place at Larry Power Road in Bourbonnais Township in Kankakee County, Illinois, where the Illinois Department of Transportation placed two QBA mixes. The first mix (QBA_M1) consisted of 45% quarry by-products and 55% railroad ballast–sized 3×1 PCR. The second mix (QBA_M2) consisted of 31% and 69% quarry by-products and PCR, respectively. Two conventional ASI sections were also constructed conforming to Illinois Department of Transportation’s CS02 gradation. All sections consisted of a 9 in. (229 mm) QBA/PCR layer topped with a 3 in. (76 mm) dense-graded capping layer. Laboratory studies preceded the construction to recommend optimum quarry by-product content in the QBA materials and construction practice. The Illinois Center for Transportation research team monitored the quality and uniformity of the construction using nondestructive testing techniques such as dynamic cone penetrometer, lightweight deflectometer, and falling weight deflectometer. The segregation potential was monitored by visual inspection and imaging-based techniques. Short-term field evaluation of the constructed QBA layers, particularly QBA_M2 with a 31% quarry by-product content, showed no evidence of abnormal segregation and did not jeopardize the structural integrity of the QBA ASI layers, which had slightly lower but comparable strength and stiffness profiles to the conventional ASI sections. The use of QBA materials in ASI was field validated as a sustainable construction practice to provide stable pavement foundation layers.
Style APA, Harvard, Vancouver, ISO itp.
10

Dobranich, D. A computer program to determine the specific power of prismatic-core reactors. Office of Scientific and Technical Information (OSTI), maj 1987. http://dx.doi.org/10.2172/6129635.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii