Gotowe bibliografie tematyczne / Polymeric Solar Cells

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Polymeric Solar Cells”

Autor: Grafiati
Data publikacji: 7 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Polymeric Solar Cells”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Polymeric Solar Cells"

1

Mdluli, Siyabonga B., Morongwa E. Ramoroka, Sodiq T. Yussuf, Kwena D. Modibane, Vivian S. John-Denk i Emmanuel I. Iwuoha. "π-Conjugated Polymers and Their Application in Organic and Hybrid Organic-Silicon Solar Cells". Polymers 14, nr 4 (13.02.2022): 716. http://dx.doi.org/10.3390/polym14040716.

Pełny tekst źródła
Streszczenie:
The evolution and emergence of organic solar cells and hybrid organic-silicon heterojunction solar cells have been deemed as promising sustainable future technologies, owing to the use of π-conjugated polymers. In this regard, the scope of this review article presents a comprehensive summary of the applications of π-conjugated polymers as hole transporting layers (HTLs) or emitters in both organic solar cells and organic-silicon hybrid heterojunction solar cells. The different techniques used to synthesize these polymers are discussed in detail, including their electronic band structure and doping mechanisms. The general architecture and principle of operating heterojunction solar cells is addressed. In both discussed solar cell types, incorporation of π-conjugated polymers as HTLs have seen a dramatic increase in efficiencies attained by these devices, owing to the high transmittance in the visible to near-infrared region, reduced carrier recombination, high conductivity, and high hole mobilities possessed by the p-type polymeric materials. However, these cells suffer from long-term stability due to photo-oxidation and parasitic absorptions at the anode interface that results in total degradation of the polymeric p-type materials. Although great progress has been seen in the incorporation of conjugated polymers in the various solar cell types, there is still a long way to go for cells incorporating polymeric materials to realize commercialization and large-scale industrial production due to the shortcomings in the stability of the polymers. This review therefore discusses the progress in using polymeric materials as HTLs in organic solar cells and hybrid organic-silicon heterojunction solar cells with the intention to provide insight on the quest of producing highly efficient but less expensive solar cells.
Style APA, Harvard, Vancouver, ISO itp.
2

Palewicz, Marcin, i Agnieszka Iwan. "Photovoltaic Phenomenon in Polymeric Thin Layer Solar Cells". Current Physical Chemistry 1, nr 1 (1.01.2011): 27–54. http://dx.doi.org/10.2174/1877946811101010027.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Palewicz, Marcin, i Agnieszka Iwan. "Photovoltaic Phenomenon in Polymeric Thin Layer Solar Cells". Current Physical Chemistrye 1, nr 1 (1.01.2011): 27–54. http://dx.doi.org/10.2174/1877947611101010027.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Lanzi, Massimiliano, Elisabetta Salatelli, Tiziana Benelli, Daniele Caretti, Loris Giorgini i Francesco Paolo Di-Nicola. "A regioregular polythiophene-fullerene for polymeric solar cells". Journal of Applied Polymer Science 132, nr 25 (10.03.2015): n/a. http://dx.doi.org/10.1002/app.42121.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Szindler, Magdalena M. "Polymeric Electrolyte Thin Film for Dye Sensitized Solar Cells Application". Solid State Phenomena 293 (lipiec 2019): 73–81. http://dx.doi.org/10.4028/www.scientific.net/ssp.293.73.

Pełny tekst źródła
Streszczenie:
In this paper, the possibility of replacing liquid electrolyte in a dye sensitized solar cells with a thin film of conductive polymer material was investigated. Liquid electrolyte in the construction of dye sensitized solar cells leaks and evaporates and leads to corrosion of the electrode, which lowers the conversion efficiency of solar radiation to electricity. The research focuses on the appropriate doping of the PVDF-HFP polymer by potassium iodide to improve its electrical conductivity and the development of thin film deposition technology for use in solar cells. Changes in PVDF-HFP surface morphology were researched through increasing of the potassium iodide content measured by scanning electron microscope. The increased content of potassium iodide also led to increased electrical conductivity measured by the Keithley meter. In order to test the suitability of developed materials for application in the construction of photovoltaic cells, a series of dye-sensitized solar cells ITO/TiO2/dye/active layer/Al were prepared. The active layer is made from pure PVDF-HFP and doped with potassium iodide. As a reference solar cell, a standard dye sensitized solar cell with a liquid electrolyte and a counter electrode was also made. Keywords PVDF-HFP; Polyelectrolyte; Dye-sensitized solar cells
Style APA, Harvard, Vancouver, ISO itp.
6

Vlachopoulos, Nick, Michael Grätzel i Anders Hagfeldt. "Solid-state dye-sensitized solar cells using polymeric hole conductors". RSC Advances 11, nr 62 (2021): 39570–81. http://dx.doi.org/10.1039/d1ra05911d.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Seco, Cristina Rodríguez, Anton Vidal-Ferran, Rajneesh Misra, Ganesh D. Sharma i Emilio Palomares. "Efficient Non-polymeric Heterojunctions in Ternary Organic Solar Cells". ACS Applied Energy Materials 1, nr 8 (6.07.2018): 4203–10. http://dx.doi.org/10.1021/acsaem.8b00828.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Hahn, T., C. Saller, M. Weigl, I. Bauer, T. Unger, A. Köhler i P. Strohriegl. "Organic solar cells with crosslinked polymeric exciton blocking layer". physica status solidi (a) 212, nr 10 (10.06.2015): 2162–68. http://dx.doi.org/10.1002/pssa.201532040.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Uranbileg, Nergui, Chenglin Gao, Chunming Yang, Xichang Bao, Liangliang Han i Renqiang Yang. "Amorphous electron donors with controllable morphology for non-fullerene polymer solar cells". Journal of Materials Chemistry C 7, nr 35 (2019): 10881–90. http://dx.doi.org/10.1039/c9tc02663k.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Lim, Kyung-Geun, Soyeong Ahn, Young-Hoon Kim, Yabing Qi i Tae-Woo Lee. "Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells". Energy & Environmental Science 9, nr 3 (2016): 932–39. http://dx.doi.org/10.1039/c5ee03560k.

Pełny tekst źródła
Streszczenie:
Tailoring the interface energetics between a polymeric hole extraction layer (HEL) and a photoactive layer (PAL) in organic photovoltaics (OPVs) and organic–inorganic hybrid perovskite solar cells (PrSCs) is very important to maximize open circuit voltage (Voc), power conversion efficiency (PCE), and device lifetime.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Polymeric Solar Cells"

1

Andersson, Lars Mattias. "Electronic Transport in Polymeric Solar Cells and Transistors". Doctoral thesis, Linköping : Department of Physics, Chemistry and Biology, Linköping University, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10380.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Mbambisa, Gcineka. "Polymeric-bimetallic oxide nanoalloy for the construction of photovoltaic cells". University of the Western Cape, 2014. http://hdl.handle.net/11394/4364.

Pełny tekst źródła
Streszczenie:
Philosophiae Doctor - PhD
Research in renewable energy has become a focal point as a solution to the energy crisis. One of renewable forms of energy is solar energy, with the main challenge in the development of the solar cells being the high cost. This has led to the exploration of the use of organic molecules to construct solar cells since it will lead to lowered costs of construction. The focus of this research is on the synthesis and characterisation of the polyaniline derivatives materials and zinc gallate for application in the construction of hybrid solar cells with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as an acceptor. The polyaniline (PANi) and doped polyaniline derivatives, polyaniline phenathrene sulfonic acid (PANi-PSA), poly[ortho-methyl aniline] phenanthrene sulfonc acid (POMA-PSA) poly[ortho-methyl aniline] anthracene sulfonc acid (POMA-ASA) were produced via chemical synthetic procedures. The zinc gallate (ZnGa2O4) was also produced using a chemical method. The vibrational and electronic spectra of the polymers and zinc gallate were interrogated independently and dependently. Electronic transitions due to charge defects (polarons and bipolarons) were observed for the polymers that are doped. The PANi was the one with the lowest band gap of 2.4 eV with the POMA-ASA having the widest bandgap of 3.0 eV. The XRD and TEM analysis of the polymers revealed characteristics that show that the PANi has the highest level of crystallinity and the POMA-ASA displayed the least level of crystallinity. The electronic data, XRD, TEM data led to the conclusion that the conductivity of the polymers is decreasing in the following sequence, PANi > PANi-PSA > POMA-PSA > POMA-ASA. The photoluminescence of the polymers alone and with the nanoparticles was investigated in solution and on an ITO coated glass substrate. Photoluminescence was observed for the polymers due to relaxation of the exciton and also from the formation of excimers. The relaxation due to the exciton was observed at higher energy levels, while the one that is as a result of the excimer formation was seen at lower energy levels. Enhancement of the peak due to the excimer was observed when the compound is mixed with the nanoparticles in solution. When the analysis was done on the ITO coated glass substrate, it was found that zinc gallate does not lead to quenching of the emission of the polymers; hence it can not be used as an acceptor in this particular system. The electrochemical behaviour of the polyaniline derivatives was investigated using cyclic voltammetry and electrochemical impedance spectroscopy. Interaction of the polymers with the PCBM (acceptor) was investigated using UV-visible absorption spectroscopy and photoluminescence spectroscopy. It was able to quench the photoluminescence of the polymers. Hence it was used as an acceptor in the construction of the photovoltaic cells. The polymers alone and with the nanoparticles were used in the formation of bulk heterojunction photovoltaic cells with PCBM as an acceptor. The photovoltaic behaviour was investigated and PANi was the one that displayed the highest efficiency.
Style APA, Harvard, Vancouver, ISO itp.
3

Ripollés, Sanchis Teresa. "Interfacial and Bulk Operation of Polymeric Solar Cells by Optoelectronics and Structural Techniques". Doctoral thesis, Universitat Jaume I, 2014. http://hdl.handle.net/10803/277095.

Pełny tekst źródła
Streszczenie:
This Ph.D. Thesis focuses on the investigation of organic photovoltaic (OPV) technology, especially in aspects of experimental device processing, and optoelectronic and electrical characterization on OPV devices to be readily marketable. More specifically, the topics addressed are the following: origin of recombination current,open-circuit voltage and crystallinity, transport driving force, contact selectivity and interface states, alternative hole transporting layers and oxygen and degradation routes.
Style APA, Harvard, Vancouver, ISO itp.
4

Mangold, Hannah [Verfasser]. "Charge separation and recombination in novel polymeric absorber materials for organic solar cells : a photophysical study / Hannah Mangold". Mainz : Universitätsbibliothek Mainz, 2013. http://d-nb.info/1046208454/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Ekhagen, Sebastian. "Stability of electron acceptor materials for organic solar cells : a work function study of C60/C70 derivatives and N2200". Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-72727.

Pełny tekst źródła
Streszczenie:
Thin films of the fullerenes PC60BM and PC70BM and the non-fullerene N2200, three popular electron acceptor materials in organic photovoltaics, have been studied, using both the Kelvin probe method as well as ultraviolet photoelectron spectroscopy. With these methods the work function was measured, as well as the highest occupied molecular orbital (HOMO) onset. Additionally band bending effects were studied by illuminating the samples while measuring the work function with the Kelvin probe so called surface photovoltage. Sample of each material was exposed to either air and simulated sunlight or N2 and simulated sunlight, for different length of time, to observe how the materials work function evolves after exposure to the different conditions. It was observed that, as expected from previous studies, that PC60BM was less photo-stable than PC70BM. Additionally, the work function of PC60BM changed significantly by storage in N2. Each material after exposure for 24h to air and light, was annealed and measured with the Kelvin probe. A restoring effect was observed,  for the non-fullerene material N2200. All three materials developed an increasing surface photovoltage, which suggest increased band bending, when exposed to air and light, indicating that due phot-oxidization, charges are redistributed at the surface of the film. The fullerenes showed a larger surface photovoltage effect than the non-fullerene materials. A difference between the work function values obtained from the Kelvin probe method and the ultraviolet photoelectron spectroscopy could be seen, however the exact reason for this couldn't be isolated within this thesis, but was discussed.
Style APA, Harvard, Vancouver, ISO itp.
6

Quadretti, Debora. "Nuovi polimeri tiofenici per celle fotovoltaiche con architettura BHJ". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/16662/.

Pełny tekst źródła
Streszczenie:
Recently, as the fossil fuels strongly decreased, several studies have been conducted in order to exploit solar power as an alternative source of energy. To make this possible with sustainable costs, the attention has been focused on the development of organic photovoltaic solar cells (OPVs) based on polymeric photoactive layer. The aim of this work is to describe the synthesis and characterization of new copolymers, poly[3-(6-fullerenylhexyl)thiophene-co-3-(6-bromohexyl)thiophene], starting from soluble regioregular (PT6BrR) and regiorandom (PT6Br) homopolymeric precursors. These materials are new intrinsically conductive copolymers made of thiophenic units bearing a fullerene and a bromine atom at the end of a hexylic side chain. The obtained homopolymers and copolymers have been widely characterized with different techniques, such as 1H-NMR, FT-IR and UV-Vis spectroscopy, thermal analysis (DSC and TGA) and gel permeation chromatography (GPC). All the synthesized materials were tested as active media in organic solar devices of BHJ type, blended with PC61BM (1:1 w/w) as the acceptor material and as double-cable materials.
Style APA, Harvard, Vancouver, ISO itp.
7

Liu, Hua. "Investigation on Transport Mechanisms and Interfacial Properties of Solar Cells By Simulation". University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1365873270.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Braun, Slawomir. "Studies of Materials and Interfaces for Organic Electronics". Doctoral thesis, Linköping : Univ, 2007. http://www.bibl.liu.se/liupubl/disp/disp2007/tek1103s.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Yi, Chao. "Towards High Performance Polymer Solar Cells Through Interface Engineering". University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1367597024.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

He, Yinghui. "Novel N-type Π-conjugated Polymers for all-polymer solar cells". Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0651/document.

Pełny tekst źródła
Streszczenie:
Les cellules solaires organiques (OSC) apparaissent comme une technologie prometteuse pour les énergies renouvelables en raison de leur poids léger, leur grande flexibilité et leur processus de fabrication peu coûteux. Jusqu'à présent, la plupart des OPV ont utilisé des dérivés de Fullerene, tels que PCBM ou PC71BM, en tant qu'accepteur d'électrons dans la couche active, qui s'est avéré être un goulet d'étranglement pour cette technologie. Par conséquent, le développement d'accepteurs non-fullerene est devenu la nouvelle force motrice de ce domaine. Les cellules solaires tout-polymères (tous-PSC) qui ont les avantages de la robustesse, de la stabilité et de l'accessibilité ont déjà atteint PCE jusqu'à 9%. Ainsi, le développement de nouveaux matériaux accepteurs est impératif pour améliorer les performances de tous les PSC
Organic solar cells (OSCs) appear as a promising technology for renewable energy owing to their light weight, great flexibility and low-cost fabrication process. So far most of the OPV shave been using fullerene derivatives, such as PCBM or PC71BM, as the electron acceptor in the active layer, which have been proven to a bottleneck for this technology. Therefore,developing non-fullerene acceptors has become the new driving force for this field. All-polymer solar cells (all-PSCs) that have the advantages of robustness, stability and tunability have already achieved PCE up to 9%. Thus, developing novel acceptor materials is imperative for improving the performance of all-PSCs
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Polymeric Solar Cells"

1

Solar module packaging: Polymeric requirements and selection. Boca Raton: Taylor & Francis, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Krebs, Frederik C., red. Stability and Degradation of Organic and Polymer Solar Cells. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119942436.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Krebs, Frederik C. Stability and degradation of organic and polymer solar cells. Hoboken, N.J: Wiley, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Burte, Edmund Paul. Herstellung und Charakterisierung von Inversionsschichtsolarzellen auf polykristallinem Silizium. Essen: W. Girardet, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Gregg, Brian A. Do the defects make it work?: Defect engineering in Pi-conjugated polymers and their solar cells. Golden, CO: National Renewable Energy Laboratory, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ram, Kachare, Moacanin Jovan 1926- i Jet Propulsion Laboratory (U.S.), red. A summary report on the Flat-Plate Solar Array Project Workshop on Transparent Conducting Polymers: January 11 and 12, 1985. Pasadena, Calif: Jet Propulsion Laboratory, California Institute of Technology, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Polymeric Solar Cells: Materials, Design, Manufacture. DEStech Publications, Inc., 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Poliskie, Michelle. Solar Module Packaging: Polymeric Requirements and Selection. Taylor & Francis Group, 2016.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Poliskie, Michelle. Solar Module Packaging: Polymeric Requirements and Selection. Taylor & Francis Group, 2016.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Poliskie, Michelle. Solar Module Packaging: Polymeric Requirements and Selection. Taylor & Francis Group, 2017.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Polymeric Solar Cells"

1

Lu, Luyao, i Luping Yu. "Polymers for Solar Cells". W Encyclopedia of Polymeric Nanomaterials, 1–9. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36199-9_12-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Lu, Luyao, i Luping Yu. "Polymers for Solar Cells". W Encyclopedia of Polymeric Nanomaterials, 2013–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-29648-2_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

John, Suru Vivian, i Emmanuel Iwuoha. "Electrochromic Polymers for Solar Cells". W Polymers and Polymeric Composites: A Reference Series, 789–823. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-95987-0_22.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

John, Suru Vivian, i Emmanuel I. Iwuoha. "Electrochromic Polymers for Solar Cells". W Polymers and Polymeric Composites: A Reference Series, 1–36. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92067-2_22-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Duan, Chunhui, Chengmei Zhong, Fei Huang i Yong Cao. "Interface Engineering for High Performance Bulk-Heterojunction Polymeric Solar Cells". W Organic Solar Cells, 43–79. London: Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-4823-4_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Facchetti, Antonio. "Polymeric Acceptor Semiconductors for Organic Solar Cells". W Organic Photovoltaics, 239–300. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527656912.ch08.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Sharma, Shveta, Richika Ganjoo, Abhinay Thakur i Ashish Kumar. "One-Dimensional Polymeric Nanocomposites for Flexible Solar Cells". W One-Dimensional Polymeric Nanocomposites, 307–20. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003223764-17.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Petchimuthu, Karapagavinayagam, Baby Suneetha Ragupathy, Joseph Sahaya Anand, Suguna Perumal i Vedhi Chinnapiyan. "Recent Development in One-Dimensional Polymer-Based Nanomaterials for High-Performance Solar Cells". W One-Dimensional Polymeric Nanocomposites, 321–36. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003223764-18.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Suganya, N., G. Hari Hara Priya i V. Jaisankar. "Fabrication of Natural Dye-Sensitised Solar Cells Based on Quasi Solid State Electrolyte Using TiO2 Nanocomposites". W Advanced Polymeric Systems, 31–43. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003337058-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Shuai, Zhigang, Lingyi Meng i Yuqian Jiang. "Theoretical Modeling of the Optical and Electrical Processes in Polymeric Solar Cells". W Topics in Applied Physics, 101–42. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-45509-8_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Polymeric Solar Cells"

1

Raffaelle, Ryne, Brian Landi, Christopher Evans, Cory Cress, John Andersen, Stephanie Castro i Sheila Bailey. "Nanomaterial Development for Polymeric Solar Cells". W 2006 IEEE 4th World Conference on Photovoltaic Energy Conference. IEEE, 2006. http://dx.doi.org/10.1109/wcpec.2006.279413.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Castro, Stephanie, Ryne Raffaelle, Sheila Bailey i Brian Landi. "Colloidal CuInS2 Nanoparticles for Polymeric Solar Cells". W 2nd International Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-5528.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Wu, Fu-Chiao, Tsai-Bau Wu, Horng-Long Cheng, Wei-Yang Chou i Fu-Ching Tang. "Microstructural modification of polycarbazole-based polymeric solar cells by thermal annealing". W 2014 21st International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD). IEEE, 2014. http://dx.doi.org/10.1109/am-fpd.2014.6867183.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

de Oliveira Hansen, Roana M., Manuela Schiek, Yinghui Liu, Morten Madsen i Horst-Günter Rubahn. "Efficiency enhancement of ITO-free organic polymeric solar cells by light trapping". W SPIE Photonics Europe, redaktorzy Ralf Wehrspohn i Andreas Gombert. SPIE, 2012. http://dx.doi.org/10.1117/12.921797.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Prosposito, P., L. D'Amico, M. Casalboni i N. Motta. "Periodic arrangement of mono-dispersed gold nanoparticles for high performance polymeric solar cells". W 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2015. http://dx.doi.org/10.1109/nano.2015.7389005.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Yusli, Mohd Nizam, Khaulah Sulaiman, Swee-Ping Chia, Kurunathan Ratnavelu i Muhamad Rasat Muhamad. "Solvent Effect on the Formation of Photoactive Thin Films for the Polymeric Solar Cells". W FRONTIERS IN PHYSICS: 3rd International Meeting. AIP, 2009. http://dx.doi.org/10.1063/1.3192258.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Guedes, Andre F. S., Vilmar P. Guedes, Monica L. Souza, Simone Tartari i Idaulo J. Cunha. "The electrodeposition of multilayers on a polymeric substrate in flexible organic photovoltaic solar cells". W SPIE Optics + Photonics for Sustainable Energy, redaktorzy Louay A. Eldada i Michael J. Heben. SPIE, 2015. http://dx.doi.org/10.1117/12.2189872.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Samoylov, Anton, Nick Swenson, Chi Nguyen, Antonio Murrieta, Juliana Baltram, Matthew Dailey i Adam Printz. "Improving the Thermomechanical Stability of High Efficiency Perovskite Solar Cells via Polymeric Nanofiber Reinforcement". W Materials Research Society Fall 2022 Meeting, Boston, MA, 11/27/22-12/02/22. US DOE, 2022. http://dx.doi.org/10.2172/1922118.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Gao, Yongqian, Thomas P. Martin, Edwards T. Niles, Adam J. Wise, Alan K. Thomas i John K. Grey. "Spectroscopic and electrical imaging of disordered polymeric solar cells: understanding aggregation effects on material performance". W SPIE NanoScience + Engineering, redaktor Oleg V. Prezhdo. SPIE, 2010. http://dx.doi.org/10.1117/12.861859.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Kim, D. S., R. Smirani, M. A. El Khakani, J. Hong, M. H. Kang, B. Rounsaville, A. Ristow i in. "High performance solar cells with silicon carbon nitride (SiCxNy) antireflection coatings deposited from polymeric solid source". W 2008 33rd IEEE Photovoltaic Specialists Conference (PVSC). IEEE, 2008. http://dx.doi.org/10.1109/pvsc.2008.4922640.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Polymeric Solar Cells"

1

Sellinger, Alex. Perovskite Solar Cells: Addressing Low Cost, High Efficiency, and Reliability through Novel Polymeric Hole Transport Materials. Office of Scientific and Technical Information (OSTI), styczeń 2023. http://dx.doi.org/10.2172/1913945.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Yang, Yang. Achieving 15% Tandem Polymer Solar Cells. Fort Belvoir, VA: Defense Technical Information Center, czerwiec 2015. http://dx.doi.org/10.21236/ada618617.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Stiebitz, Paul. Hyperspectral Polymer Solar Cells, Integrated Power for Microsystems. Office of Scientific and Technical Information (OSTI), maj 2014. http://dx.doi.org/10.2172/1167104.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sun, Sam-Shajing. Cost Effective Polymer Solar Cells Research and Education. Office of Scientific and Technical Information (OSTI), październik 2015. http://dx.doi.org/10.2172/1345531.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jen, Alex K. Development of Efficient Charge-Selective Materials for Bulk Heterojunction Polymer Solar Cells. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2015. http://dx.doi.org/10.21236/ada616502.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Alivisatos, A. P. Hybrid Nanorod-Polymer Solar Cell: Final Report; 19 July 1999--19 September 2002. Office of Scientific and Technical Information (OSTI), sierpień 2003. http://dx.doi.org/10.2172/15004565.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Adam J. Moule. Final Closeout report for grant FG36-08GO18018, titled: Functional Multi-Layer Solution Processable Polymer Solar Cells. Office of Scientific and Technical Information (OSTI), maj 2012. http://dx.doi.org/10.2172/1047857.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Heeger, Alan J., i Thuc-Quyen Nguyen. Functional Interfaces in Polymer-Based Bulk Heterojunction Solar Cells: Establishment of a Cluster for Interdisciplinary Research and Training. Office of Scientific and Technical Information (OSTI), styczeń 2009. http://dx.doi.org/10.2172/946053.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Mantel, A., I. Irgibaeva, A. Aldongarov i N. Barashkov. Preparation and characterization of down-shifting film for silicon solar cell based on the stilben 420, PVA polymer and silver nanoparticles. Physico-Technical Society of Kazakhstan, grudzień 2017. http://dx.doi.org/10.29317/ejpfm.2017010209.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Polymeric Solar Cells” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii