Gotowe bibliografie tematyczne / Polymeric composites

Gotowa bibliografia na temat „Polymeric composites”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 3 marca 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Polymeric composites”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Polymeric composites"

1

Kim, Jin Woo, Jung Ju Lee i Dong Gi Lee. "Effect of Fiber Orientation on the Tensile Strength in Fiber-Reinforced Polymeric Composite Materials". Key Engineering Materials 297-300 (listopad 2005): 2897–902. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.2897.

Pełny tekst źródła
Streszczenie:
The study for strength calculation of one way fiber-reinforced composites and the study measuring precisely fiber orientation distribution were presented. However, because the DB that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed, we need the systematic study for that. Therefore, in this study, we investigated what effect the fiber content ratio and fiber orientation distribution have on the strength of composite sheet after making fiber reinforced polymeric composite sheet by changing fiber orientation distribution with the fiber content ratio. The result of this study will become a guide to design data of the most suitable parts design or fiber reinforced polymeric composite sheet that uses the fiber reinforced polymeric composite sheet in industry spot, because it was conducted in terms of developing products. We studied the effect the fiber orientation distribution has on tensile strength of fiber reinforced polymeric composite material and achieved this results below. We can say that the increasing range of the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation is getting wider as the fiber content ratio increases. It shows that the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation 90° is similar with the value of polypropylene’s intensity when fiber orientation function is J= 0.7, regardless of the fiber content ratio. Tensile strength of fiber reinforced polymeric composite is affected by the fiber orientation distribution more than by the fiber content ratio.
Style APA, Harvard, Vancouver, ISO itp.
2

OPRAN, Constantin Gheorghe, Cătălina Bivolaru i Diana Murar. "Researches Concerning Structural and Mechanical Behavior of Sandwich Composite Polymeric Products". Key Engineering Materials 498 (styczeń 2012): 151–60. http://dx.doi.org/10.4028/www.scientific.net/kem.498.151.

Pełny tekst źródła
Streszczenie:
The sandwich composite polymeric products have a wide utilization in various fileds like aircraft and automotive construction, load bearing structures, sports equipment, more specifically, wherever weight-saving is required. Sandwich composites polymeric products represent excellent examples of the potential offered by composite materials. The combination of two composite faces and a lightweight polystyrene core allows obtaining a high flexural stiffness with a weak mass. This paper deals with the analysis of the structural and mechanical behavior properties of the core, adhesive and faces, for sandwich composite polymeric products. There are also presented the investigation results on how different specific factors like: mechanical and structural behavior, interface between the faces and core, constant force resistance in time, the reinforcing elements (fiber glass), the polyester core do influence the machinability of sandwich composites polymeric products..
Style APA, Harvard, Vancouver, ISO itp.
3

Kim, GeunHyung, i Yuri M. Shkel. "Polymeric Composites Tailored by Electric Field". Journal of Materials Research 19, nr 4 (kwiecień 2004): 1164–74. http://dx.doi.org/10.1557/jmr.2004.0151.

Pełny tekst źródła
Streszczenie:
A solid composite of desirable microstructure can be produced by curing a liquid polymeric suspension in an electric field. Redistribution effect of the field-induced forces exceeds that of centrifugation, which is frequently employed to manufacture functionally graded materials. Moreover, unlike centrifugational sedimentation, the current approach can electrically rearrange the inclusions in targeted areas. The electric field can be employed to produce a composite having uniformly oriented structure or only modify the material in selected regions. Field-aided technology enables polymeric composites to be locally micro-tailored for a given application. Moreover, materials of literally any composition can be manipulated. In this article we present testing results for compositions of graphite and ceramic particles as well as glass fibers in epoxy. Electrical and rheological interactions of inclusions in a liquid epoxy are discussed. Measurements of tensile modulus and ultimate strength of epoxy composites having different microstructure of 10 vol% graphite, ceramic particles and glass fiber are presented.
Style APA, Harvard, Vancouver, ISO itp.
4

Lee, Hanbin, Nam Kyeun Kim, Daeseung Jung i Debes Bhattacharyya. "Flammability Characteristics and Mechanical Properties of Casein Based Polymeric Composites". Polymers 12, nr 9 (12.09.2020): 2078. http://dx.doi.org/10.3390/polym12092078.

Pełny tekst źródła
Streszczenie:
Even though casein has an intrinsic potential ability to act as a flame retardant (FR) additive, the research regarding the FR performance of casein filled polymeric composites has not been thoroughly conducted. In the present work, two commercial casein products, such as lactic casein 720 (LAC) and sodium casein 180 (SC), were chosen to investigate their effects on the performances of the polypropylene (PP) composites. The melt compounding and compression moulding processes were employed to fabricate these casein-based composites. Ammonium polyphosphate (APP) was also selected to explore its combined effects in conjunction with casein on the composite’s flammability. The cone calorimeter results showed that the addition of casein significantly reduced (66%) the peak heat release rate (PHRR) of the composite compared to that of neat PP. In particular, the combination of LAC and APP led to the formation of more compact and rigid char compared to that for SC based sample; hence, a further reduction (80%) in PHRR and self-extinguishment under a vertical burn test were accomplished. Moreover, the tensile modulus of the composite improved (23%) by the combined effects of LAC and APP. The overall research outcome has established the potential of casein as a natural protein FR reducing a polymer’s flammability.
Style APA, Harvard, Vancouver, ISO itp.
5

Qi, Ben, i Michael Bannister. "Mechanical Performance of Carbon/Epoxy Composites with Embedded Polymeric Films". Key Engineering Materials 334-335 (marzec 2007): 469–72. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.469.

Pełny tekst źródła
Streszczenie:
This paper presents experimental results on the mechanical performance of advanced carbon/epoxy composites with embedded polymeric films. The composite laminates with polymeric films, which are potentially used as a sensor/actuator carrier for structural health monitoring applications, were investigated under various mechanical loadings including low velocity impact, single lap shear and short beam shear. The preliminary work showed that embedment of those polymeric films does not degrade, but could significantly improve, the mechanical properties of the composite laminates.
Style APA, Harvard, Vancouver, ISO itp.
6

Kala, Shiva Kumar, i Chennakesava Reddy Alavala. "Enhancement of Mechanical and Wear Behavior of ABS/Teflon Composites". Trends in Sciences 19, nr 9 (8.04.2022): 3670. http://dx.doi.org/10.48048/tis.2022.3670.

Pełny tekst źródła
Streszczenie:
In the present investigations, Most of the engineering applications of metallic materials are replaced by polymeric based composite materials. Because of the low cost and accessible handling of polymer composite materials such as Acrylonitrile butadiene styrene (ABS) matrix materials are used to make the composites with additions of filler enhance the properties of the matrix materials. In the present study, ABS matrix material is used to make the composite materials by adding the Teflon materials. Investigations are carried out to find the enhancement of the composites' mechanical properties. Optimizing the process parameters is done to identify the composite's most optimum used to get composite with better mechanical properties. SEM analysis and wear Debris are investigated to study the microscopic surface nature and behavior of the composites.
Style APA, Harvard, Vancouver, ISO itp.
7

Chambers, D. L., K. A. Taylor, C. T. Wan i A. J. Emrick. "Sputtering on polymeric composites". Surface and Coatings Technology 41, nr 3 (czerwiec 1990): 315–23. http://dx.doi.org/10.1016/0257-8972(90)90142-y.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Mang, Thomas, i Friedhelm Haulena. "Recycling of polymeric composites". Macromolecular Symposia 135, nr 1 (grudzień 1998): 147–56. http://dx.doi.org/10.1002/masy.19981350117.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kužel, R., I. Kǐivka, J. Kubát, J. Prokeš, S. Nešpůek i C. Klason. "Multi-component polymeric composites". Synthetic Metals 67, nr 1-3 (listopad 1994): 255–61. http://dx.doi.org/10.1016/0379-6779(94)90052-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Kim, Byung Sun, i Terry F. Lehnhoff. "Polymeric Composite Tube Fabrication". Journal of Engineering Materials and Technology 117, nr 2 (1.04.1995): 235–37. http://dx.doi.org/10.1115/1.2804535.

Pełny tekst źródła
Streszczenie:
An aluminum mold was designed for fabrication of research quality composite tubes on a hot press (miniclave). This mold allows the pressure to be applied uniformly to the inner surface of a composite (prepreg tape) tube while a constant vacuum is also applied independently to the composite throughout the course of fabrication. With proper placement of stoppers and spacers inside the mold, various types of high quality unidirectional composites with fibers oriented either in the zero or 90 degree directions, respectively, were fabricated on a hot press. The mold design had less resin loss throughout fabrication compared to a conventional tubular mold. Physical and material tests have characterized the superior qualities of the resulting composite tubes.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Polymeric composites"

1

Norpoth, Lawrence R. "Processing parameters for the consolidation of thermoplastic composites". Thesis, Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/19099.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Corlay, Charlotte. "Thermal and mechanical analysis of polymer matrix composite materials exposed to a concentrated heat source for a short duration". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 236 p, 2007. http://proquest.umi.com/pqdlink?did=1251905081&Fmt=7&clientId=79356&RQT=309&VName=PQD.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.M.E.)--University of Delaware, 2006.
Principal faculty advisors: Suresh G. Advani, Dept. of Mechanical Engineering; and Shridhar Yarlagadda, Shridhar Yarlagadda, Dept. of Electrical and Computer Engineering. Includes bibliographical references.
Style APA, Harvard, Vancouver, ISO itp.
3

Prystaj, Laurissa Alia. "Effect of carbon filler characteristics on the electrical properties of conductive polymer composites possessing segregated network microstructures". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/31667.

Pełny tekst źródła
Streszczenie:
Thesis (M. S.)--Materials Science and Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Rosario Gerhardt; Committee Member: Gleb Yushin; Committee Member: Hamid Garmestani. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Style APA, Harvard, Vancouver, ISO itp.
4

Hsu, Sheng-yuan. "On the prediction of compressive strength and propagation stress of aligned fiber-matrix composites /". Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Podnos, Eugene Grigorievich. "Application of fictitious domain method to analysis of composite materials /". Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Poole, Eric L. "Durability of polymeric composites after elevated temperature aging /". Thesis, Connect to this title online; UW restricted, 1997. http://hdl.handle.net/1773/9963.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Potocki, Mark L. "Behavior of composite panels under an applied load and one dimensional heat flux /". Thesis, Connect to this title online; UW restricted, 2000. http://hdl.handle.net/1773/7025.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Yang, Heechun. "Modeling the processing science of thermoplastic composite tow prepreg materials". Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17217.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Bhuyan, Satyam Kumar. "Investigation of tribological properties of biobased polymers and polymeric composites". [Ames, Iowa : Iowa State University], 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Batra, Saurabh. "Creep rupture and life prediction of polymer composites". Morgantown, W. Va. : [West Virginia University Libraries], 2009. http://hdl.handle.net/10450/10381.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2009.
Title from document title page. Document formatted into pages; contains xix, 195 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 193-195).
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Polymeric composites"

1

Engineers, Society of Automotive, i SAE International Congress & Exposition (1998 : Detroit, Mich.), red. Polymer composites and polymeric materials. Warrendale, PA: Society of Automotive Engineers, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Seymour, Raymond Benedict. Polymer composites. Utrecht, The Netherlands: VSP, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Nwabunma, Domasius. Polyolefin composites. Hoboken, N.J: John Wiley & Sons, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

1985), Prague IUPAC Microsymposium on Macromolecules (28th. Polymer composites: Proceedings. Berlin: De Gruyter, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

author, Gupta A. C., red. Polymer composites. London: New Academic Science, 2019.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Advanced polymeric materials: From macro- to nano-length scales. Toronto: Apple Academic Press, 2015.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

I, Kroschwitz Jacqueline, red. High performance polymers and composites. New York: Wiley, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Haghi, A. K., G. E. Zaikov i Pooria Pasbakhsh. Applied research on polymer composites. Toronto: Apple Academic Press, 2015.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Weitsman, Y. Jack. Fluid Effects in Polymers and Polymeric Composites. Boston, MA: Springer US, 2012. http://dx.doi.org/10.1007/978-1-4614-1059-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

International, ASM, red. Advanced polymer composites. Materials Park, OH: ASM International, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Polymeric composites"

1

Fancey, Kevin S. "Viscoelastically Prestressed Polymeric Matrix Composites". W Polymer Composites, 715–46. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527645213.ch22.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Manayan Parambil, Ajithkumar, Jiji Abraham, Praveen Kosappallyillom Muraleedharan, Deepu Gopakumar i Sabu Thomas. "Fiber-Reinforced Composites". W Polymers and Polymeric Composites: A Reference Series, 417–46. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-95987-0_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Billah, Shah Mohammed Reduwan. "Composites and Nanocomposites". W Polymers and Polymeric Composites: A Reference Series, 447–512. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-95987-0_15.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Manayan Parambil, Ajithkumar, Jiji Abraham, Praveen Kosappallyillom Muraleedharan, Deepu Gopakumar i Sabu Thomas. "Fiber-Reinforced Composites". W Polymers and Polymeric Composites: A Reference Series, 1–30. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92067-2_14-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Reduwan Billah, Shah M. "Composites and Nanocomposites". W Polymers and Polymeric Composites: A Reference Series, 1–67. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-92067-2_15-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ray, Bankim Chandra, Rajesh Kumar Prusty i Dinesh Kumar Rathore. "Introduction". W Fibrous Polymeric Composites, 1–27. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Ray, Bankim Chandra, Rajesh Kumar Prusty i Dinesh Kumar Rathore. "Micro- and Macrocharacterization Techniques". W Fibrous Polymeric Composites, 29–34. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ray, Bankim Chandra, Rajesh Kumar Prusty i Dinesh Kumar Rathore. "Temperature-Induced Degradations in Polymer Matrix Composites". W Fibrous Polymeric Composites, 35–49. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Ray, Bankim Chandra, Rajesh Kumar Prusty i Dinesh Kumar Rathore. "Moisture-Dominated Failure in Polymer Matrix Composites". W Fibrous Polymeric Composites, 51–78. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Ray, Bankim Chandra, Rajesh Kumar Prusty i Dinesh Kumar Rathore. "Hygrothermal-Dominated Failure in Polymer Matrix Composites". W Fibrous Polymeric Composites, 79–83. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Polymeric composites"

1

PARK, CHANWOOK, JIWON JUNG, TAEHOON PARK i GUNJIN YUN. "A Polymer-physics-based Multiscale Modeling Approach for Inhomogeneous Deformation of Polymeric Nanocomposites". W American Society for Composites 2019. Lancaster, PA: DEStech Publications, Inc., 2019. http://dx.doi.org/10.12783/asc34/31385.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Nikitin, L., A. Vasilkov, Yu Vopilov, M. Buzin, S. Abramchuk, V. Bouznik, A. Khokhlov, Alberto D’Amore, Domenico Acierno i Luigi Grassia. "MAKING OF METAL-POLYMERIC COMPOSITES". W IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989022.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Hosier, I. L., M. S. Abd Rahman, E. W. Westenbrink i A. S. Vaughan. "Laser ablation of polymeric composites". W 2010 10th IEEE International Conference on Solid Dielectrics (ICSD). IEEE, 2010. http://dx.doi.org/10.1109/icsd.2010.5568154.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Řídký, R., M. Popovič, S. Rolc, M. Drdlová i J. Krátký. "The absorption of polymeric composites". W INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015 (ICNAAM 2015). Author(s), 2016. http://dx.doi.org/10.1063/1.4952290.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Gargiulo, M., L. Sorrentino, S. Iannace, Alberto D’Amore, Domenico Acierno i Luigi Grassia. "HIGH PERFORMANCE POLYMERIC FOAMS". W IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2988967.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ganguli, Sabyasachi, Ajit K. Roy, David Anderson i Josh Wong. "Thermally Conductive Epoxy Nanocomposites". W ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-43347.

Pełny tekst źródła
Streszczenie:
The quest for improvement of thermal conductivity in aerospace structures is gaining momentum. This is even more important as modern day aerospace structures are embedded with electronics which generate considerable amounts of heat energy. This generated heat if not dissipated might potentially affect the structural integrity of the composite structure. The use of polymer based composites in aerospace applications has also increased due to their obvious superior specific properties. But the thermal conductivity of the polymer matrix is very low and not suited for the design demands in aerospace applications. Several research studies have been conducted to improve the thermal conductivity of the polymeric composites. Different fillers have been used to improve the thermal conductivity of the polymeric matrix. Fillers may be in the form of fibers or in the form of particles uniformly distributed in the polymer matrix. The thermophysical properties of fiber filled composites are anisotropic, except for the very short, randomly distributed fibers, while the thermophysical properties of particle filled polymers are isotropic. Numerous studies have also been conducted in recent years where nanoparticles have been dispersed in the polymeric matrix to improve the thermal conductivity. Putman et al. [1] used the 3ω method to study the thermal conductivity of composites of nanoscale alumina particles in polymethylmethacrylate (PMMA) matrices in the temperature range 40 to 280 K. For 10% of 60 nm of alumina particle filler by weight (3.5% by volume) thermal conductivity of the composite slightly decreased at low temperatures. Whereas, above 100 K, thermal conductivity of the nanocomposite increased by 4% at room temperature. Kruger and Alam [2] studied the thermal conductivity of aligned, vapor grown carbon nanoscale fiber reinforced polypropylene composite. They measured thermal conductivity by laser flash instrument in the longitudinal and transverse directions for 9%, 17% and 23% fiber reinforcements by volume. The values of thermal conductivity as reported by them were 2.09, 2.75, 5.38 W/m.K for the longitudinal directions and 2.42, 2.47, 2.49 W/m-K for the transverse direction respectively, while the thermal conductivity of unfilled PP was 0.24 W/m-K. Exfoliated graphite platelets are another filler material of promise for improving the thermo-mechanical properties of the polymeric matrix. Aylsworth [3, 4] developed and proposed expanded graphite as reinforcement of polymers in 1910s. Lincoln and Claude [5] in 1980s proposed the dispersion of intercalated graphite in polymeric resins by conventional composite processing techniques. Since that time, research has been conducted on exfoliated graphite reinforced polymers using graphite particles of various dimensions and a wide range of polymers. Drzal et al. [6] have demonstrated the use of exfoliated graphite platelets to enhance the thermal and mechanical properties of polymeric resins. They concluded that composites made by in situ processing have better mechanical properties compared to composites made by melt-mixing or other ex situ fabrication methods due to better dispersion, prevention of agglomeration and stronger interactions between the reinforcement and the polymer. In the present study we use silver nano-filaments, nickel nano-filaments, alumina and exfoliated graphite platelets to enhance the thermal conductivity of an epoxy thermoset resin. The objective of this research is to identify the right filler to achieve the thermal conductivity as required by aerospace design engineers which is around 10 W/ m-K. An arbitrary filler loading of 8 wt% was chosen to compare the different fillers used in this study.
Style APA, Harvard, Vancouver, ISO itp.
7

ELNEKHAILY, SARAH A., i RAMESH TALREJA. "Damage Initiation in Unidirectional Fiber Reinforced Polymeric Composites Under Shear Loading". W American Society for Composites 2017. Lancaster, PA: DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15228.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Cardone, G., G. Carotenuto, D. Acierno, Alberto D’Amore, Domenico Acierno i Luigi Grassia. "POLYMERIC NANOCOMPOSITES BASED ON GOLD-NANOPARTICLES". W IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989013.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Harinath, V. A., Jianzhong Lou, Jag Sankar i Leonard Uitenham. "Characterization of the Thermo-Oxidative Stability of Filled Thermoplastic Polyetherimide". W ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43599.

Pełny tekst źródła
Streszczenie:
Selected fillers were incorporated to prepare polytherimide composite. The influence of fillers on the thermo-oxidative stability of the composite was studied by thermogravimetric analysis. The results showed that at optical filler loading and characteristics, the polymer composite became superior in its thermo-oxidative stability that is very promising in widening the window of service temperature of polyimides for extremely high temperature conditions where most polymeric composites fail. The findings should prove useful in developing high-temperature polymer composites for aerospace and electronics applications.
Style APA, Harvard, Vancouver, ISO itp.
10

Bria, Vasile, Iulian-Gabriel Birsan, Adrian Circiumaru, Victor Ungureanu i Igor Roman. "Tribological Characterization of Particulate Composites". W ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-25302.

Pełny tekst źródła
Streszczenie:
Among composites, the polymer matrix ones are the cheapest and the easiest to form but they show major disadvantages such as poor electrical and thermal conductivity, low fire resistance etc. In the case of any composite, some of the properties may be designed, some of them may be obtained by using an appropriate forming technique and, at least, some of them may be improved by special treatments. In the case of polymer matrix composites the first two ways are recommended if we are taking into account the polymers’ properties while the last one will turn the PMC into an expensive material due to the costs of metal or oxide thin film deposition on polymeric surface. Is it possible to solve all the problems by material design and by developing a convenient forming technique? Powders are used as fillers in order to obtain bi-components composites. The most important aim is about the uniform distribution of particles in matrix. If the fillers’ particles are arranged into the polymer volume is possible to change the electro-magnetic behavior of the obtained composite making this one to act as a meta-material. The powders can be dielectric as talc, clay or ferrite can be magnetic active as ferrite, or electric active as CNT or carbon nano-fibers. All these powders have effects on the electromagnetic, thermal and mechanical properties of the composite. This study is about the influence of fillers on the tribological behavior of particulate composites. Epoxy resin was used as matrix and various powders were used to fill the polymer: ferrite, zinc, clay. The materials were thermally treated in order to reach the best polymer properties. Pin on disk fixture on a CETR-UTM had been used to determine the friction coefficient for each filler concentration. The Wear resistance of each material had been evaluated using the same apparatus but with some modifications.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Polymeric composites"

1

Chiang, Martin Y. M., i Gregory B. McKenna. Hygrothermal effects on the performance of polymers and polymeric composites:. Gaithersburg, MD: National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5826.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Cai, L. W., i Y. Weitsman. Non-Fickian Moisture Diffusion in Polymeric Composites. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1992. http://dx.doi.org/10.21236/ada257919.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Weitsman, Y. J. Effects of Fluids on Polymeric Composites - A Review. Fort Belvoir, VA: Defense Technical Information Center, lipiec 1995. http://dx.doi.org/10.21236/ada297030.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sun, C. T. Characterizing and Modeling Physical Aging in Polymeric Composites. Fort Belvoir, VA: Defense Technical Information Center, lipiec 2001. http://dx.doi.org/10.21236/ada388068.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Huber, Tito E. Scanning Force Microscopy of Nanostructured Conducting Composites and Polymeric Materials. Fort Belvoir, VA: Defense Technical Information Center, grudzień 2001. http://dx.doi.org/10.21236/ada398399.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Nguyen, Tinh. A fatigue model for fiber-reinforced polymeric composites for offshore applications. Gaithersburg, MD: National Bureau of Standards, 2000. http://dx.doi.org/10.6028/nist.tn.1434.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Weitsman, Y. J. A Method to Determine Moisture Profiles from Total Moisture Weight-Gain Data in Polymeric Composites. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1991. http://dx.doi.org/10.21236/ada247449.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, Hannah Peel, L. Mimum, J, Buchanan, Xin Guan i in. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), wrzesień 2021. http://dx.doi.org/10.21079/11681/42132.

Pełny tekst źródła
Streszczenie:
The properties of composite materials are strongly influenced by both the physical and chemical properties of their individual constituents, as well as the interactions between them. For nanocomposites, the incorporation of nano-sized dopants inside a host material matrix can lead to significant improvements in mechanical strength, toughness, thermal or electrical conductivity, etc. In this work, the effect of cellulose nanofibrils on the structure and mechanical properties of cellulose nanofibril poly(vinylidene fluoride) (PVDF) composite films was investigated. Cellulose is one of the most abundant organic polymers with superior mechanical properties and readily functionalized surfaces. Under the current processing conditions, cellulose nanofibrils, as-received and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) oxidized, alter the crystallinity and mechanical properties of the composite films while not inducing a crystalline phase transformation on the 𝛾 phase PVDF composites. Composite films obtained from hydrated cellulose nanofibrils remain in a majority 𝛾 phase, but also exhibit a small, yet detectable fraction of 𝛼 and ß PVDF phases.
Style APA, Harvard, Vancouver, ISO itp.
9

Chattopadhyay, Aditi. Damage Precursor Detection in Polymer Matrix Composites Using Novel Smart Composite Particles. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2016. http://dx.doi.org/10.21236/ad1018261.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Johnson, Carl, Shu Sing Chang i Donald Hunston. Polymer Composite Processing:. Gaithersburg, MD: National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.4461.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Polymeric composites” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii