Gotowa bibliografia na temat „Polymer sublayer”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Polymer sublayer”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Polymer sublayer"
Makarenkova, Anastasiia, i Inna Starovoit. "INVESTIGATION OF VORTEX FEEDING OF POLYMER INTO THE TURBULENT BOUNDARY LAYER". Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies, nr 1 (1.08.2023): 149–53. http://dx.doi.org/10.20998/2222-0631.2023.01.22.
Pełny tekst źródłaJovanovic, Jovan, Bettina Frohnapfel, Mira Pashtrapanska i Franz Durst. "The effect of polymers on the dynamics of turbulence in a drag reduced flow". Thermal Science 9, nr 1 (2005): 13–41. http://dx.doi.org/10.2298/tsci0501013j.
Pełny tekst źródłaShugurov, A. R., A. I. Kozel’skaya i A. V. Panin. "Viscoelastic wrinkling in compression-stressed metal film-polymer sublayer system". Technical Physics Letters 37, nr 10 (październik 2011): 896–99. http://dx.doi.org/10.1134/s1063785011100130.
Pełny tekst źródłaPavlovsky, V., i О. Orlov. "Specific features of coordinated variations in friction resistance and flow velocity profile in tubes at Toms effect". Transactions of the Krylov State Research Centre 3, nr 397 (6.08.2021): 25–32. http://dx.doi.org/10.24937/2542-2324-2021-3-397-25-32.
Pełny tekst źródłaMorimoto, Masahiro, Atsuhiro Kusakabe, Kazuya Sakamoto, Junji Gonda i Atsushi Kubono. "Formation of Interfacial Layer between Liquid Crystal and Polymer Alignment Sublayer". Japanese Journal of Applied Physics 48, nr 7 (6.07.2009): 070220. http://dx.doi.org/10.1143/jjap.48.070220.
Pełny tekst źródłaYANG, SHU-QING, i G. DOU. "Turbulent drag reduction with polymer additive in rough pipes". Journal of Fluid Mechanics 642 (11.12.2009): 279–94. http://dx.doi.org/10.1017/s002211200999187x.
Pełny tekst źródłaSingh, Rashi, i Ashwini Bharati. "Review: Controlled Release of Analgesics". International Journal for Research in Applied Science and Engineering Technology 11, nr 2 (28.02.2023): 654–59. http://dx.doi.org/10.22214/ijraset.2023.49109.
Pełny tekst źródłaJovanović, J., M. Pashtrapanska, B. Frohnapfel, F. Durst, J. Koskinen i K. Koskinen. "On the Mechanism Responsible for Turbulent Drag Reduction by Dilute Addition of High Polymers: Theory, Experiments, Simulations, and Predictions". Journal of Fluids Engineering 128, nr 1 (2.08.2005): 118–30. http://dx.doi.org/10.1115/1.2073227.
Pełny tekst źródłaMorimoto, Masahiro, Yoshio Makino, Junji Gonda, Masahiro Misaki, Kenji Ishida, Yasukiyo Ueda i Atsushi Kubono. "Electrorheological response of the interfacial layer between a liquid crystal and a polymer alignment sublayer". Thin Solid Films 558 (maj 2014): 227–30. http://dx.doi.org/10.1016/j.tsf.2014.02.065.
Pełny tekst źródłaKalutskii, V. N., V. G. Shigorin, L. V. Lomova i N. I. Lebedinskaya. "Effect of metallising conditions on structural characteristics of the aluminium sublayer of metallised-polymer coatings". Welding International 5, nr 11 (styczeń 1991): 883–84. http://dx.doi.org/10.1080/09507119109446808.
Pełny tekst źródłaRozprawy doktorskie na temat "Polymer sublayer"
Zhang, Teng. "Elaboration and characterization of functionalized hybrid carbon fiber reinforced composites (CFRCs) for innovative applications". Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCA005.
Pełny tekst źródłaCarbon fiber reinforced composites (CFRC) have been successfully developed since decades as efficient and lightweight materials for various innovative applications and mostly for transport applications. Due to the low electrical conductivity of the polymer matrix of CFRCs, a better functionalization of such materials, such as developing a metallic coating on the CFRC structure of an aircraft, brings added values that contribute to a longer life and new performances such as the lightning strike protection (LSP) performance. The major objective of this PhD research program is to improve the metallization of a CFRC substrate by a new approach that focuses on the development of a hybrid layered structure made of CFRC and a biphasic sublayer embedded onto the top surface of this structure, prior to a cold spray metallization. To achieve this objective, the research works rely on an experimental task and a computational analysis which can be divided into three significant contributions:The first experimental part focuses on the development of a biphasic sublayer in between the CFRC substrate and the metal coating. This sublayer consists of a mixture of a polymer (Thermoset Epoxy, Thermoplastic Polymethyl methacrylate) with a micron sized metal powder (Al, Cu). The vacuum assisted resin infusion process is used to produce the hybrid CFRC with the biphasic sublayer on its top face. Prior to the cold spray metallization, the thermo-physical properties of the hybrid CFRCs/biphasic sublayer are characterized using a differential scanning calorimetry (DSC) analysis and a thermal conductivity measurement. The mechanical properties of the hybrid CFRC system are characterized by means of mechanical testing (impact test, tensile test, three-point flexural test, lap-shear adhesion test).The second part of this PhD work investigates the metallization of the hybrid system CFRC/biphasic sublayer using the low-pressure cold spray Dymet 423 system. Copper, aluminum, zinc, and tin powders are used as coating material due to their good electrical and thermal conductivity. Powder mixtures made of these metals and alumina powders (Al2O3) are considered as other potential materials for the cold spray metallization of the biphasic sublayer/CFRC system. An embedment of the cold spray powders onto the biphasic sublayer is found to ease the coating formation, except for the Cu cold spray powder. A continuous 60 μm thick coating of Sn+Al2O3 is obtained onto the biphasic TS-Cu sublayer, that shows the feasibility of surface functionalization of CFRC via a biphasic sublayer and a low-pressure cold spraying.The third part of this PhD work focuses on a phenomenological analysis of the mechanical response of the TS biphasic sublayer during the high-speed collision of the cold spray process. This part aims to depict further improvements through a computational analysis. The erosion issue of the epoxy matrix of the sublayer is found to govern the unsuccessful coating formation onto the thermoset sublayer. Therefore, to find out suitable biphasic polymer materials, a simulation of a Cu powder collision onto thermoplastic media (TP and TP-Cu) has been investigated, that shows a good embedment of the Cu powder onto the TP substrate via a mechanical interlocking (metal-to-resin bonding). The copper particles of the biphasic TP-Cu sublayer enable to promote a plastic deformation of the sprayed Cu particles and is conducive to a bonding formation and coating growth. Finally, to provide a proof of concept, experimental HPCS metallization onto biphasic sublayers made of a TP matrix are performed. A continuous coating formation of spherical Cu, dendritic Cu, and Cu+Al2O3 is obtained onto TP-Cu sublayer, with a thickness of 95 µm, 231 µm, and 114 μm respectively. Thereby, the feasibility of the metallization of CFRC via a TP biphasic sublayer and a high-pressure cold spray deposition has been demonstrated
Streszczenia konferencji na temat "Polymer sublayer"
Zhang, T., E. Padayodi, R. N. Raoelison i J. C. Sagot. "Development of Compatibilizing Sublayer for Metallizing CFRP Structures by Cold Spray". W ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0893.
Pełny tekst źródłaZhang, T., E. Padyyodi, R. N. Raoelison i J. C. Sagot. "Sublayer-Assisted Cold Spray Metallization of Carbon Fiber Reinforced Composites". W ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0314.
Pełny tekst źródłaEtebari, Ali, Barbar Akle, Kevin Farinholt, Matthew Bennet, Donald J. Leo i Pavlos P. Vlachos. "The Use of Active Ionic Polymers in Dynamic Skin Friction Measurements". W ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56837.
Pełny tekst źródłaLawn, Brian R. "Failure of Ceramic Coatings on Soft Substrates". W ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2661.
Pełny tekst źródłaCorredor, Fabio Ernesto Rodriguez, Majid Bizhani i Ergun Kuru. "An Experimental Investigation of Turbulent Drag Reduction in Concentric Annulus Using Particle Image Velocimetry Technique". W ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-11408.
Pełny tekst źródłaOrtiz-Villafuerte, Javier, i Yassin A. Hassan. "Investigation of Microbubble Boundary Layer Using Particle Image Velocimetry". W ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45639.
Pełny tekst źródłaBandyopadhyay, Promode R. "Stokes’ Mechanism of Drag Reduction". W ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45340.
Pełny tekst źródłaHerrera, Carlos, Abdul Muqtadir Khan, Abdulrahman Almulhim i Saad Hamid. "A Workflow to Assess the Effect of Lateral Landing, Completion, and Fracturing on Production Potential in an Explorational Clastic Environment". W Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213758-ms.
Pełny tekst źródłaLuo, Yin, Philippe Enkababian, Leah Hrab, Anas Najy, Ahmed Shokry, Ahmed Berrim, Arlen Sarsekov, Andika Sulaiman i Bulat Kamaletdinov. "Diverting from the Status Quo: Leveraging Acid Retardation for Production Enhancement in Offshore Carbonates in UAE". W SPE Annual Technical Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/206154-ms.
Pełny tekst źródła