Artykuły w czasopismach na temat „Plastic slip”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Plastic slip”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Schmalzer, Andrew M., i A. Jeffrey Giacomin. "Die drool theory". Journal of Polymer Engineering 33, nr 1 (1.02.2013): 1–18. http://dx.doi.org/10.1515/polyeng-2012-0044.
Pełny tekst źródłaKawano, Yoshiki, Tsuyoshi Mayama, Ryouji Kondou i Tetsuya Ohashi. "Crystal Plasticity Analysis of Change in Active Slip Systems of α-Phase of Ti-6Al-4V Alloy under Cyclic Loading". Key Engineering Materials 725 (grudzień 2016): 183–88. http://dx.doi.org/10.4028/www.scientific.net/kem.725.183.
Pełny tekst źródłaZhu, Xiao Hua, Yu Wang, Fu Cheng Deng, Li Ping Tang i Hua Tong. "Optimal Design of Slip Dog Based on the Elasticoplasticity Contact Analysis". Applied Mechanics and Materials 34-35 (październik 2010): 1718–23. http://dx.doi.org/10.4028/www.scientific.net/amm.34-35.1718.
Pełny tekst źródłaYokogawa, Toshiya, Sachi Niki, Junko Maekawa, Masahiko Aoki i Masaki Fujikane. "Dislocation Formation via an r-Plane Slip Initiated by Plastic Deformation during Nano-Indentation of a High Quality Bulk GaN Surface". MRS Advances 1, nr 58 (2016): 3847–52. http://dx.doi.org/10.1557/adv.2016.165.
Pełny tekst źródłaZhu, Eryu, Teng Li, Haoran Liu, Chunqi Zhu, Lei Liu, Yuanyuan Tian, Yujie Li i Wei Yang. "Bond-Slip Behavior between Plastic Bellow and Concrete". Advances in Materials Science and Engineering 2022 (14.06.2022): 1–16. http://dx.doi.org/10.1155/2022/2450503.
Pełny tekst źródłaLiu, Yun Xi, Wei Chen, Zhi Qiang Li, Liang Liang Liu i Dong Liu. "In Situ Observation on the Deformation Behavior of Primary α-Ti in a Textured Ti-6Al-4V". Materials Science Forum 993 (maj 2020): 365–73. http://dx.doi.org/10.4028/www.scientific.net/msf.993.365.
Pełny tekst źródłaAndo, Shinji, Masayuki Tsushida i Hiromoto Kitahara. "Plastic Deformation Behavior in Magnesium Alloy Single Crystals". Materials Science Forum 706-709 (styczeń 2012): 1122–27. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1122.
Pełny tekst źródłaOhashi, Tetsuya, Michihiro Sato i Yuhki Shimazu. "Evaluation of Plastic Work Density, Strain Energy and Slip Multiplication Intensity at Some Typical Grain Boundary Triple Junctions". Materials Science Forum 654-656 (czerwiec 2010): 1283–86. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.1283.
Pełny tekst źródłaGerdeen, J. C., W. W. Predebon, P. M. Schwab i A. Shah. "Elastic-Plastic Analysis of Directionally Solidified Lamellar Eutectic Composites". Journal of Engineering Materials and Technology 109, nr 1 (1.01.1987): 53–58. http://dx.doi.org/10.1115/1.3225933.
Pełny tekst źródłaLiu, Conghui, Rhys Thomas, João Quinta da Fonseca i Michael Preuss. "Early slip activity and fatigue crack initiation of a near alpha titanium alloy". MATEC Web of Conferences 321 (2020): 11040. http://dx.doi.org/10.1051/matecconf/202032111040.
Pełny tekst źródłaAnguige, Keith, i Patrick W. Dondl. "Relaxation of the Non-Convex, Incremental Energy-Minimization Problem in Single-Slip Strain-Gradient Plasticity". Key Engineering Materials 651-653 (lipiec 2015): 963–68. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.963.
Pełny tekst źródłaOrtiz, M. "Plastic Yielding as a Phase Transition". Journal of Applied Mechanics 66, nr 2 (1.06.1999): 289–98. http://dx.doi.org/10.1115/1.2791048.
Pełny tekst źródłaSung, T. H., J. C. Huang, J. H. Hsu, S. R. Jian i T. G. Nieh. "Yielding and plastic slip in ZnO". Applied Physics Letters 100, nr 21 (21.05.2012): 211903. http://dx.doi.org/10.1063/1.4720169.
Pełny tekst źródłaHuang, Houxu, Jie Li i Jiuqi Wei. "Analytical Solution of Displacements Around Circular Openings in Generalized Hoek-Brown Rocks". Journal of Theoretical and Applied Mechanics 47, nr 3 (26.09.2017): 81–95. http://dx.doi.org/10.1515/jtam-2017-0015.
Pełny tekst źródłaHayroyan, S. G., i H. S. Hayroyan. "Methods for determining shear resistance by a system of cracks and old slip surfaces with the purpose to evaluate the stability of landslides". Journal of Physics: Conference Series 2231, nr 1 (1.04.2022): 012017. http://dx.doi.org/10.1088/1742-6596/2231/1/012017.
Pełny tekst źródłaHayroyan, S. G., i H. S. Hayroyan. "Methods for determining shear resistance by a system of cracks and old slip surfaces with the purpose to evaluate the stability of landslides". Journal of Physics: Conference Series 2231, nr 1 (1.04.2022): 012017. http://dx.doi.org/10.1088/1742-6596/2231/1/012017.
Pełny tekst źródłaYu, Qin, Jian Wang i Yanyao Jiang. "Inverse Slip Accompanying Twinning and Detwinning during Cyclic Loading of Magnesium Single Crystal". Journal of Materials 2013 (17.09.2013): 1–8. http://dx.doi.org/10.1155/2013/903786.
Pełny tekst źródłaLian, Yong, Li Hu, Tao Zhou, Mingbo Yang i Jin Zhang. "Numerical Investigation of Secondary Deformation Mechanisms on Plastic Deformation of AZ31 Magnesium Alloy Using Viscoplastic Self-Consistent Model". Metals 9, nr 1 (5.01.2019): 41. http://dx.doi.org/10.3390/met9010041.
Pełny tekst źródłaEterashvili, Tamaz, T. Dzigrashvili i M. Vardosanidze. "Initial Aspects of Low-Cycle Fatigue Fracture of Martensitic Steels". Key Engineering Materials 348-349 (wrzesień 2007): 385–88. http://dx.doi.org/10.4028/www.scientific.net/kem.348-349.385.
Pełny tekst źródłaMan, Jiří, Anja Weidner, Petr Klapetek i Jaroslav Polák. "Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel". Key Engineering Materials 592-593 (listopad 2013): 785–88. http://dx.doi.org/10.4028/www.scientific.net/kem.592-593.785.
Pełny tekst źródłaZaiser,, M., i E. C. Aifantis,. "Avalanches and Slip Patterning in Plastic Deformation". Journal of the Mechanical Behavior of Materials 14, nr 4-5 (wrzesień 2003): 255–70. http://dx.doi.org/10.1515/jmbm.2003.14.4-5.255.
Pełny tekst źródłaMuñoz, A., A. Domínguez-Rodríguez i J. Castaing. "Slip Systems and plastic anisotropy in CaF2". Journal of Materials Science 29, nr 23 (grudzień 1994): 6207–11. http://dx.doi.org/10.1007/bf00354561.
Pełny tekst źródłaTabatabaei Mirhosseini, Ramin, Ehsan Araghizadeh i Soroush Rashidi. "Approximate Relationship for the Bond-Slip Using a Concrete Damage-Plastic Model". Advances in Materials Science and Engineering 2023 (17.04.2023): 1–15. http://dx.doi.org/10.1155/2023/1320192.
Pełny tekst źródłaUehara, Takuya. "An Atomistic Study on the Slip Deformation Mechanism of Crystalline Materials Using a Weak-Plane Model". Applied Mechanics and Materials 197 (wrzesień 2012): 321–26. http://dx.doi.org/10.4028/www.scientific.net/amm.197.321.
Pełny tekst źródłaSerre, Ingrid, Daniel Salazar i Jean Bernard Vogt. "Plastic Deformation Quantified by Atomic Force Microscopy Measurements for Duplex Stainless Steel under Monotonic and Cyclic Loading". Applied Mechanics and Materials 13-14 (lipiec 2008): 163–72. http://dx.doi.org/10.4028/www.scientific.net/amm.13-14.163.
Pełny tekst źródłaPolák, Jaroslav, i Jiří Man. "Cyclic Slip Localization and Crack Initiation in Crystalline Materials". Advanced Materials Research 891-892 (marzec 2014): 452–57. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.452.
Pełny tekst źródłaEterashvili, Tamaz, T. Dzigrashvili i M. Vardosanidze. "TEM Study of Microstructure Changes, Formation and Distribution of Slip Bands in Austenitic Steels after Low-Cycle Fatigue (LCF) Deformation - II". Key Engineering Materials 665 (wrzesień 2015): 141–44. http://dx.doi.org/10.4028/www.scientific.net/kem.665.141.
Pełny tekst źródłaXu, Biqiang, i Yanyao Jiang. "Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact". Journal of Tribology 124, nr 1 (26.03.2001): 20–26. http://dx.doi.org/10.1115/1.1395630.
Pełny tekst źródłaXu, Shuang, i Ya Fang Guo. "Effects of Strain Rate on the Tensile Deformation of Single-Crystal Copper Films". Materials Science Forum 675-677 (luty 2011): 671–73. http://dx.doi.org/10.4028/www.scientific.net/msf.675-677.671.
Pełny tekst źródłaMatsugaki, Aira, Gento Aramoto, Takuya Ishimoto i Takayoshi Nakano. "Control of Osteoblastic Cell Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure". Materials Science Forum 706-709 (styczeń 2012): 549–52. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.549.
Pełny tekst źródłaMatsuno, Hiroshi. "Characteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued Metals". Key Engineering Materials 340-341 (czerwiec 2007): 513–18. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.513.
Pełny tekst źródłaZhang, Xin Ming, i Yang Xiao. "Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy". Materials Science Forum 546-549 (maj 2007): 261–66. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.261.
Pełny tekst źródłaSetz, Luiz Fernando Grespan, Laís Koshimizu, Sonia Regina Homem de Mello-Castanho i Márcio Raymundo Morelli. "Rheological Analysis of Ceramics Suspensions with High Solids Loading". Materials Science Forum 727-728 (sierpień 2012): 646–51. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.646.
Pełny tekst źródłaPolák, Jaroslav. "Role of Persistent Slip Bands and Persistent Slip Markings in Fatigue Crack Initiation in Polycrystals". Crystals 13, nr 2 (25.01.2023): 220. http://dx.doi.org/10.3390/cryst13020220.
Pełny tekst źródłaCelik, Alptekin, Fabian Willems, Mustafa Tüzün, Svetlana Marinova, Johannes Heyn, Markus Fiedler i Christian Bonten. "Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications". Polymers 15, nr 12 (6.06.2023): 2589. http://dx.doi.org/10.3390/polym15122589.
Pełny tekst źródłaWang, Hongbo, Bowen Huang, Wangyu Hu i Jian Huang. "Studying Plastic Deformation Mechanism in β-Ti-Nb Alloys by Molecular Dynamic Simulations". Metals 14, nr 3 (10.03.2024): 318. http://dx.doi.org/10.3390/met14030318.
Pełny tekst źródłaZeng, Bo, Hongwei Liu, Hongzhou Song, Zhe Zhao, Shaowei Fan, Li Jiang, Yuan Liu i in. "Design and slip prevention control of a multi-sensory anthropomorphic prosthetic hand". Industrial Robot: the international journal of robotics research and application 49, nr 2 (30.12.2021): 289–300. http://dx.doi.org/10.1108/ir-07-2021-0133.
Pełny tekst źródłaCarrez, Philippe, Patrick Cordier, David Mainprice i Andrea Tommasi. "Slip systems and plastic shear anisotropy in Mg2SiO4 ringwoodite: insights from numerical modelling". European Journal of Mineralogy 18, nr 2 (11.05.2006): 149–60. http://dx.doi.org/10.1127/0935-1221/2006/0018-0149.
Pełny tekst źródłaWang, Jiwei, Bin Shao, Debin Shan, Bin Guo i Yingying Zong. "The Effect of Hydrogen on Plastic Anisotropy of Mg and α-Ti/Zr from First-Principles Calculations". Materials 16, nr 8 (11.04.2023): 3016. http://dx.doi.org/10.3390/ma16083016.
Pełny tekst źródłaFu, Ge Yan, i Shi Hong Shi. "Mechanism Research of Low-Stress Threshold of Plastic Accumulation under Super-Low Repeated Impact Stress". Key Engineering Materials 464 (styczeń 2011): 605–8. http://dx.doi.org/10.4028/www.scientific.net/kem.464.605.
Pełny tekst źródłaZeng, Xiang Guo, Qing Yuan Wang, Jing Hong Fan, Zhan Hua Gao i Xiang He Peng. "A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application". Materials Science Forum 546-549 (maj 2007): 81–88. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.81.
Pełny tekst źródłaAlharbi, Hamad F., Monis Luqman, Ehab El-Danaf i Nabeel H. Alharthi. "Experimental and Numerical Study of Texture Evolution and Anisotropic Plastic Deformation of Pure Magnesium under Various Strain Paths". Advances in Materials Science and Engineering 2018 (2018): 1–12. http://dx.doi.org/10.1155/2018/2867281.
Pełny tekst źródłaJang, Min Gyu, Chul Hee Lee i Seung Bok Choi. "Stick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction Model". Advanced Materials Research 47-50 (czerwiec 2008): 246–49. http://dx.doi.org/10.4028/www.scientific.net/amr.47-50.246.
Pełny tekst źródłaAbe, Takeji. "On the Relation between R-Value of a Grain and the Operating Slip Systems of the Grain". Key Engineering Materials 626 (sierpień 2014): 566–69. http://dx.doi.org/10.4028/www.scientific.net/kem.626.566.
Pełny tekst źródłaLance, Gary L., i S. Nemat-Nasser. "Slip-induced plastic flow of geomaterials and crystals". Mechanics of Materials 5, nr 1 (marzec 1986): 1–11. http://dx.doi.org/10.1016/0167-6636(86)90011-6.
Pełny tekst źródłaLance, Gary L., i S. Nemat-Nasser. "Slip-induced plastic flow of geomaterials and crystals". Mechanics of Materials 6, nr 2 (czerwiec 1987): 175. http://dx.doi.org/10.1016/0167-6636(87)90007-x.
Pełny tekst źródłaBrown, Donald W., Sean R. Agnew, S. P. Abeln, W. R. Blumenthal, Mark A. M. Bourke, M. C. Mataya, Carlos Tomé i Sven C. Vogel. "The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning". Materials Science Forum 495-497 (wrzesień 2005): 1037–42. http://dx.doi.org/10.4028/www.scientific.net/msf.495-497.1037.
Pełny tekst źródłaA. Shubbar, Sawsan D., i Aqeel S. Al-Shadeedi. "UTILIZATION OF WASTE PLASTIC BOTTLES AS FINE AGGREGATE IN CONCRETE". Kufa Journal of Engineering 8, nr 2 (17.07.2017): 132–46. http://dx.doi.org/10.30572/2018/kje/821171.
Pełny tekst źródłaEterashvili, Tamaz, Temur Dzigrashvili i M. Vardosanidze. "SEM Study of the Influence of Microstructure on Low Cycle Fatigue Crack Growth in Martensitic Steel I". Key Engineering Materials 774 (sierpień 2018): 96–100. http://dx.doi.org/10.4028/www.scientific.net/kem.774.96.
Pełny tekst źródłaTawfik, M. S., i T. D. O’Rourke. "Load-Carrying Capacity of Welded Slip Joints". Journal of Pressure Vessel Technology 107, nr 1 (1.02.1985): 36–43. http://dx.doi.org/10.1115/1.3264401.
Pełny tekst źródła