Gotowe bibliografie tematyczne / Plasmons Tamm

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Części książek
Streszczenia konferencji

Gotowa bibliografia na temat „Plasmons Tamm”

Autor: Grafiati

Data publikacji: 12 kwietnia 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Plasmons Tamm”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Plasmons Tamm"

Balevičius, Zigmas. "Strong Coupling between Tamm and Surface Plasmons for Advanced Optical Bio-Sensing". Coatings 10, nr 12 (5.12.2020): 1187. http://dx.doi.org/10.3390/coatings10121187.

Pełny tekst źródła

Streszczenie:

The total internal reflection ellipsometry method was used to analyse the angular spectra of the hybrid Tamm and surface plasmon modes and to compare their results with those obtained using the conventional single SPR method. As such type of measurement is quite common in commercial SPR devices, more detailed attention was paid to the analysis of the p-polarization reflection intensity dependence. The conducted study showed that the presence of strong coupling in the hybrid plasmonic modes increases the sensitivity of the plasmonic-based sensors due to the reduced losses in the metal layer. The experimental results and analysis of the optical responses of three different plasmonic-based samples indicated that the optimized Tamm plasmons ΔRp(TP) and optimized surface plasmons ΔRp(SP) samples produce a response that is about five and six times greater than the conventional surface plasmon resonance ΔRp(SPR) in angular spectra. The sensitivity of the refractive index unit of the spectroscopic measurements for the optimized Tamm plasmon samples was 1.5 times higher than for conventional SPR, while for wavelength scanning, the SPR overcame the optimized TP by 1.5 times.

Style APA, Harvard, Vancouver, ISO itp.

Buchnev, Oleksandr, Alexandr Belosludtsev, Victor Reshetnyak, Dean R. Evans i Vassili A. Fedotov. "Observing and controlling a Tamm plasmon at the interface with a metasurface". Nanophotonics 9, nr 4 (18.03.2020): 897–903. http://dx.doi.org/10.1515/nanoph-2019-0514.

Pełny tekst źródła

Streszczenie:

AbstractWe demonstrate experimentally that Tamm plasmons in the near infrared can be supported by a dielectric mirror interfaced with a metasurface, a discontinuous thin metal film periodically patterned on the sub-wavelength scale. More crucially, not only do Tamm plasmons survive the nanopatterning of the metal film but they also become sensitive to external perturbations as a result. In particular, by depositing a nematic liquid crystal on the outer side of the metasurface, we were able to red shift the spectral position of Tamm plasmon by 35 nm, while electrical switching of the liquid crystal enabled us to tune the wavelength of this notoriously inert excitation within a 10-nm range.

Style APA, Harvard, Vancouver, ISO itp.

Iorsh, I., P. V. Panicheva, I. A. Slovinskii i M. A. Kaliteevski. "Coupled Tamm plasmons". Technical Physics Letters 38, nr 4 (kwiecień 2012): 351–53. http://dx.doi.org/10.1134/s1063785012040074.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chen, Yikai, Douguo Zhang, Liangfu Zhu, Qiang Fu, Ruxue Wang, Pei Wang, Hai Ming, Ramachandram Badugu i Joseph R. Lakowicz. "Effect of metal film thickness on Tamm plasmon-coupled emission". Phys. Chem. Chem. Phys. 16, nr 46 (2014): 25523–30. http://dx.doi.org/10.1039/c4cp04031g.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vijisha, M. V., Jagadeesan Ramesh, Chellaiah Arunkumar i K. Chandrasekharan. "Impressive nonlinear optical responses of a cationic porphyrin derivative in a flexible all-polymer Bragg stack on optical Tamm mode coupling". Journal of Materials Chemistry C 8, nr 36 (2020): 12689–97. http://dx.doi.org/10.1039/d0tc01874k.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pyatnov, Maxim V., Rashid G. Bikbaev, Ivan V. Timofeev, Ilya I. Ryzhkov, Stepan Ya Vetrov i Vasily F. Shabanov. "Tamm Plasmons in TiO2 Nanotube Photonic Crystals". Photonics 10, nr 1 (6.01.2023): 64. http://dx.doi.org/10.3390/photonics10010064.

Pełny tekst źródła

Streszczenie:

The anodic TiO2 photonic crystals evoke great interest for application as photocatalytic media due to high absorption of light resuling from their specific structure. In this work, the optical properties of the photonic crystal based on a bamboo-type TiO2 nanotube with a metallic coating are analyzed theoretically by the finite-difference time-domain method. The occurrence of Tamm plasmons that appears as a peak in the absorption spectrum is predicted. A Tamm plasmon polariton is a localized state of light excited at the boundary of two highly reflective media, a metal and a Bragg reflector. The integral absorption of the gold-, titanium-, and titanium nitride-coated photonic crystals in the wavelength range of 450–600 nm is calculated. It is established that the titanium nitride-coated structure exhibits the maximum integral absorption.

Style APA, Harvard, Vancouver, ISO itp.

Auguié, Baptiste, Axel Bruchhausen i Alejandro Fainstein. "Critical coupling to Tamm plasmons". Journal of Optics 17, nr 3 (13.02.2015): 035003. http://dx.doi.org/10.1088/2040-8978/17/3/035003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Leuthold, Juerg, i Alexander Dorodnyy. "On-demand emission from Tamm plasmons". Nature Materials 20, nr 12 (21.10.2021): 1595–96. http://dx.doi.org/10.1038/s41563-021-01128-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shagurina, A., S. Kutrovskaya, I. Skryabin i A. Kel’. "AFM lithography for TAMM plasmons observation". Journal of Physics: Conference Series 951 (styczeń 2018): 012021. http://dx.doi.org/10.1088/1742-6596/951/1/012021.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pühringer, Gerald, Cristina Consani i Bernhard Jakoby. "Impact of Different Metals on the Performance of Slab Tamm Plasmon Resonators". Sensors 20, nr 23 (28.11.2020): 6804. http://dx.doi.org/10.3390/s20236804.

Pełny tekst źródła

Streszczenie:

We investigate the concept of slab Tamm plasmons (STP) in regard to their properties as resonant absorber or emitter structures in the mid-infrared spectral region. In particular, we compare the selective absorption characteristics resulting from different choices of absorbing material, namely Ag, W, Mo or highly doped Si. We devised a simplified optimization procedure using finite element simulations for the calculation of the absorption together with the application of micro-genetic algorithm (GA) optimization. As characteristic for plasmonic structures, the specific choice of the metallic absorber material strongly determines the achievable quality factor (Q). We show that STP absorbers are able to mitigate the degradation of Q for less reflective metals or even non-metals such as doped silicon as plasmonic absorber material. Moreover, our results strongly indicate that the maximum achievable plasmon-enhanced absorption does not depend on the choice of the plasmonic material presuming an optimized configuration is obtained via the GA process. As a result, absorptances in the order of 50–80% could be achieved for any absorber material depending on the slab thickness (up to 1.1 µm) and a target resonance wavelength of 4.26 µm (CO2 absorption line). The proposed structures are compatible with modern semiconductor mass fabrication processes. At the same time, the optimization procedure allows us to choose the best plasmonic material for the corresponding application of the STP structure. Therefore, we believe that our results represent crucial advances towards corresponding integrated resonant absorber and thermal emitter components.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Plasmons Tamm"

Toanen, Vincent. "Plasmons Tamm pour la réalisation de nouvelles sources de lumière". Electronic Thesis or Diss., Lyon 1, 2022. http://www.theses.fr/2022LYO10049.

Pełny tekst źródła

Streszczenie:

Les plasmons Tamm, ou modes Tamm optiques, sont des modes électromagnétiques présents à l'interface entre un miroir de Bragg (DBR) et une couche métallique. Ces modes présentent un fort intérêt pour la réalisation de nouvelles sources de lumière, notamment grâce à la partie métallique, qui peut d'une part fournir un contrôle et un confinement micrométrique à trois dimensions du mode optique, et d'autre part assurer l'injection d'un courant électrique dans la structure pour y exciter un milieu émetteur. De nombreuses sources de lumière pourraient être réalisées grâce à cette double fonction du métal, comme des sources polarisées intégrées, des générateurs de plasmons de surface ou encore des tableaux de laser adressables à grande échelle. Mon travail de doctorat a consisté à pousser les sources de lumière Tamm vers l'applicatif, en développant leur fonctionnement à température ambiante et en excitation électrique, par opposition aux démonstrations à température cryogénique et en pompage optique effectuées jusqu'alors. Ce développement a été effectué sur des structures semi-conductrices basées sur des alliages ternaires d'AlGaAs, mais est hautement transposable à d'autres familles de matériaux. La première partie de ce travail s'est concentrée sur l'obtention d'un effet laser à température ambiante. Grâce à une amélioration de la structure, consistant à insérer une couche de bas indice entre le DBR semi-conducteur et le métal, les pertes ohmiques dans ce dernier ont été réduites, ce qui a permis d'atteindre le régime laser à température ambiante. Le second volet de cette thèse concerne l'injection électrique des sources de lumière à mode Tamm. Partant d'un DBR dopé, deux procédés de micro-structuration en salle blanche ont été élaborés pour permettre cette injection. Le premier, inspiré de techniques usuelles de micro-fabrication, n'a pas fait ses preuves, en raison de la dégradation de la surface du DBR par certaines étapes classiques de structuration, et de la forte sensibilité du plasmon Tamm à la composition de surface du DBR. Nous avons donc développé une méthode de structuration alternative. Son originalité repose dans la protection permanente de la surface du DBR destinée au contact avec le métal. Cette nouvelle méthode a permis la fabrication des premières diodes électroluminescentes basées sur l'émission dans un mode Tamm. Leur caractérisation a montré la réussite de l'excitation du plasmon Tamm par l'injection électrique des émetteurs à puits quantiques, et prouve la possibilité d'utiliser un unique élément métallique pour confiner le mode optique et injecter les porteurs de charge. Ces résultats constituent une étape importante vers le développement d'une variété de sources de lumière intégrées utilisant les modes Tamm
Tamm plasmons, or optical Tamm states, are electromagnetic modes that exist at the interface between a Distributed Bragg Reflector (DBR) and a metallic layer. They are of high interest for the design of new light sources, thanks to the metallic part, which can provide 3D confinement and control of the optical mode but also electrical injection of the structure, in order to excite light emitters. Many light emitting devices could be realised using this dual function, such as integrated polarised light sources, surface plasmon generators or large-scale addressable laser arrays. This PhD work mainly consisted in pushing Tamm light emitting devices towards applicability, with the development of their room-temperature operation and electrical pumping, as opposed to previous demonstrations which were carried out under cryogenic temperature and optical pumping. Semiconducting heterostructures based on ternary alloys of AlGaAs were used for this development, but our results are highly transposable to other families of materials. The first part of this work focused on obtaining a laser effect at room temperature. By improving the structure with the insertion of a low-index layer between the semiconductor DBR and the metal, the ohmic losses in the metal were reduced, thus enabling lasing operation at room temperature. The second part of this work was about achieving the electrical injection of Tamm-based light sources. Starting from a doped DBR with quantum wells, we developed two processes, mostly based on cleanroom microfabrication techniques, to enable electrical injection. The first one, inspired by common microfabrication techniques, has not proved to be successful, due to the degradation of the DBR surface by some standard fabrication steps, and to the strong sensitivity of the Tamm plasmon to the surface composition of the DBR. Therefore, we developed a second method. Its originality lies in a permanent protection of the part of the DBR on which the metallic element will be deposited to form the Tamm mode and inject electrical current. This new method allowed the fabrication of the first light-emitting diodes based on Tamm mode emission. With electro-optical measurements, we demonstrated the excitation of the Tamm plasmon state through electrical pumping of the quantum wells, and proved the possibility to use a single metallic element to confine the optical mode and bring charge carriers into the structure. These results are an important step towards the development of new integrated light emitting devices using Tamm modes

Style APA, Harvard, Vancouver, ISO itp.

Lheureux, Guillaume. "Étude de l'effet laser dans les structures à plasmon Tamm". Thesis, Lyon 1, 2015. http://www.theses.fr/2015LYO10341/document.

Pełny tekst źródła

Streszczenie:

Ce travail de thèse porte sur l'étude expérimentale de structures à plasmons Tamm actives, composées d'une couche d'argent déposée sur un miroir de Bragg semiconduc teur AlGaAs/GaAs contenant des puits quantiques InGaAs. Après une description des modes Tamm et de leurs propriétés planaires, nous nous sommes intéressés plus parti culièrement aux structures à plasmons Tamm confinés par un micro-disque de métal. Des mesures de photoluminescence ont permis de mettre en évidence un effet laser dans ces structures. Une étude approfondie a montré une évolution du seuil laser en fonction du diamètre du disque, résultant d'un compromis entre confinement et pertes. Dans un second temps, nous avons étudié la réponse optique de structures à plasmon Tamm asy métriques, où le plasmon Tamm est confiné par des micro-rectangles. Cette asymétrie lève la dégénérescence en énergie qui existe entre les deux modes linéairement polarisés de la structure. Ceci, associé à un fort désaccord spectral entre l'émission des puits et le plasmon Tamm, permet d'obtenir une émission laser linéairement polarisée . Enfin, nous présentons l'étude d'une structure à plasmon Tamm comportant un réseau permettant le couplage du plasmon Tamm au plasmon de surface de l'interface air/argent. Grâce à des mesures tirant parti de l'aspect propagatif des modes, nous avons mis en évidence un battement entre plasmon Tamm et plasmon de surface
This thesis focuses on the experimental study of actives Tamm plasmons structures, consisting in a layer of silver deposited on a AlGaAs/GaAs semiconductor Bragg mir ror which con.tains InGaAs quantum wells. After describing Tamm planar modes and their properties, we focused particularly on structures where Tamm plasmons are la terally confined by a metallic micro-disk. Photoluminescence measurements have been carried out in order to demonstrate lasing in these structures. A comprehensive study has shown a change in the lasing threshold with the diameter of the disk, resulting from a compromise between the confinement and the lasses. Secondly, we studied the optical response of asymmetric Tamm plasmon structures, where the Tamm plasmon is confined by micro-rectangles. This asymmetry lifts the degeneracy of energy between the two linearly polarized modes of the structure. Combined with a strong spectral de tuning between the quantum wells emission and the Tamm plasmon, this allows linearly polarized laser emission to set-up. Finally, we present the study of a Tamm plasmon structure comprising a gratting to couple the Tamm plasmon to the surface plasmon at the silver/air interface. Thanks to propagation measurements, we have highlighted the beating between Tamm plasmon and surface plasmon modes

Style APA, Harvard, Vancouver, ISO itp.

Mathmann, Baptiste. "États de Tamm optiques dans les nanostructures photoniques pour application aux capteurs". Electronic Thesis or Diss., Centrale Lille Institut, 2024. http://www.theses.fr/2024CLIL0027.

Pełny tekst źródła

Streszczenie:

Les capteurs d'indice de réfraction sont très largement employés dans l'industrie et la santé. Ils trouvent des applications aussi bien en contrôle de qualité que pour la détection d'espèces en chimie et biochimie. Si l'utilisation de plasmons de surface pour ces applications est très répandue, ceux-ci souffrent néanmoins de défauts, parmi lesquels de faibles facteurs de qualité. Plusieurs solutions existent pour résoudre ce problème, tels que le couplage avec d'autres modes de résonance ou l'utilisation d'effets magnéto-optiques.Dans ce travail, nous nous intéressons aux modes de Tamm optiques, aussi appelés plasmons de Tamm, et à leurs avantages pour la réalisation de capteurs d'indice de réfraction. Nous étudions dans un premier temps numériquement les modes de Tamm pouvant êtres excités en utilisant une surface structurée, composée d'un réseau de nanorubans, ainsi que l'influence sur la sensibilité de l'utilisation d'un tel réseau.Nous confrontons ensuite ces résultats numériques à l'expérience en fabriquant et en caractérisant un capteur d'indice de réfraction basé sur ce principe.Nous explorons pour finir l'utilisation d'effets magnéto-optiques (TMOKE) pour améliorer ce capteur, de façon analogue aux travaux menés dans le cadre des capteurs plasmoniques
Refractive index sensors are widely used in industry and health sectors. They find applications in quality control as well as for species detection in chemistry and biochemistry. Although the use of surface plasmons for these applications is widespread, they nevertheless suffer from shortcomings, including low quality factors. Several solutions exist to solve this problem, such as coupling with other resonance modes or using magneto-optical effects.In this work, we focus on optical Tamm modes, also called Tamm plasmons, and their advantages for the realization of refractive index sensors. We first study numerically the Tamm modes that can be excited on a structured surface, using a nanoribbon grating, as well as the influence on the sensitivity of such a grating.We then confront these numerical results with experience by fabricating and characterizing a refractive index sensor based on this principle.We finally explore the use of magneto-optical effects (TMOKE) to improve this sensor, in a way similar to the work carried out in the context of plasmonic sensors

Style APA, Harvard, Vancouver, ISO itp.

Brückner, Robert. "Coherence and Coupling of Cavity Photons and Tamm Plasmons in Metal-Organic Microcavities". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-115452.

Pełny tekst źródła

Streszczenie:

The subject of this thesis is the investigation of organic microcavities with implemented unstructured and laterally structured metal layers. The optical properties are studied by means of various spectroscopic techniques and are compared to conventional metal-free devices. It is shown that the large expected absorption caused by the embedded metal is reduced compared to the case of a free-standing metal layer of the same thickness. As a consequence of the interaction of the photonic cavity mode with the metallic structures, two new coupled modes emerge which are called Tamm plasmons. The strength of this coupling and the resulting spectral difference of these modes are defined by the thickness of both the metal layer and the adjacent dielectric layers. These control parameters enable the optimization of the structural design. Accordingly, coherent emission from Tamm plasmons is realized at room temperature. An analytical approach is developed accounting for the experimentally observed polarization splitting of detuned resonances. Next, laterally structured metal layers embedded into organic microcavities are considered. The structuring leads to a confinement of the photonic density of states evident from a clear discretization in energy of the corresponding modes. Applying a photolithographic technique to structure the metal layer into a pattern of regularly placed stripes leads to additional effects due to the resulting periodicity. By exciting this hybrid structure above a certain threshold, periodic arrays of localized cavity modes and metal-based Tamm plasmons are generated. These Bloch-like excited states are capable of phase coupling across the grating. Additionally, surface plasmon polaritons (SPPs) are excited propagating at the interface of the silver and the adjacent dielectric layers. Thanks to the periodicity of the metallic stripes, SPPs are subject to efficient Bragg scattering into the light cone in air. Modes up to order number 30 are detectable as quasi-linear periodic lines in the dispersion pattern. A Fourier analysis reveals an in- or out-of-phase coupling of the modes and a spread of the coherence over macroscopic distances of more than 40 µm. This strategy of embedding metal patterns into an organic microcavity yields a viable route towards electrically contacted organic solid-state lasers
In dieser Arbeit werden erstmals dünne, unstrukturierte sowie lateral strukturierte metallische Schichten in organische Mikroresonatoren eingebettet und anschließend die optischen Eigenschaften mittels spektroskopischer Verfahren untersucht. Es zeigt sich, dass die erwarteten hohen optischen Verluste durch die Absorption des elektrischen Feldes im Metall deutlich reduziert sind, verglichen mit dem Fall einer freistehenden, nicht eingebetteten Metallschicht gleicher Dicke. Als Folge der Wechselwirkung der photonischen Kavitätsmode mit dem Metall spaltet diese in zwei miteinander gekoppelte Moden auf. Diese neuartigen Moden werden als Tamm-Plasmonen bezeichnet. Die Kopplung sowie die spektrale Differenz beider Moden ist zum einen durch die optischen Eigenschaften und die Dicke der eingebetteten Metallschicht definiert, zum anderen durch die optische Dicke der angrenzenden dielektrischen Schichten. Dadurch ist eine Optimierung des Systems im Hinblick auf Absorption und Emissionswellenlänge der Bauteile möglich, so dass selbst bei Raumtemperatur kohärente Emission eines Tamm-Zustands erzielt werden kann. Eine erarbeitete analytische Rechnung bestätigt und erklärt die experimentell gemessene, polarisationsabhängige Aufspaltung der auftretenden resonanten Moden. Im zweiten Teil der Arbeit sind organische Mikroresonatoren, deren eingebettete Metallschicht in lateraler Richtung auf verschiedene Weisen strukturiert sind, Gegenstand der Untersuchungen. Als Folge dieser Strukturierung kommt es zur lateralen Beschränkung der photonischen Zustandsdichte, was durch eine Diskretisierung der Energiespektren der resultierenden optischen Moden experimentell nachweisbar ist. Werden periodische Metallstreifen mittels Photolithographie erzeugt, so kommt es neben einer weiteren Beeinflussung der Zustandsdichte auch zu Effekten, die durch diese Periodizität bedingt sind. Entsprechend reproduziert sich die Kavitätsmode mehrfach im Impulsraum. Oberflächenplasmonen, die auf der Grenzfläche zwischen dem Metall und den dielektrischen Schichten propagieren, werden auf Grund der Periodizität bis in den experimentell zugänglichen Lichtkegel gestreut. Dabei werden Plasmonenresonanzen bis hin zur 30. Ordnung gemessen. Im letzten Experiment werden derart periodisch strukturierte Metall-Organik-Mikroresonatoren auf ihre Lasertätigkeit hin untersucht. Eine lokal begrenzte optische Anregung mittels eines gepulsten Lasers führt zur Ausbildung verschiedener Bloch-ähnlicher Moden, deren Kohärenz sich lateral bis zu 40 µm ausbreitet. Eine Fourieranalyse zeigt eindeutige und feste Phasenbeziehungen zwischen angrenzenden Maxima der Moden. Zusammenfassend ergeben sich interessante metall-organische Systeme, die minimale Absorption und niedrige Laserschwellen aufweisen und die prinzipielle Eignung zur elektrischen Kontaktierung besitzen

Style APA, Harvard, Vancouver, ISO itp.

Brückner, Robert [Verfasser], Karl [Akademischer Betreuer] Leo, Karl [Akademischer Betreuer] Lao i Thomas [Akademischer Betreuer] Riedl. "Coherence and Coupling of Cavity Photons and Tamm Plasmons in Metal-Organic Microcavities / Robert Brückner. Gutachter: Karl Lao ; Thomas Riedl. Betreuer: Karl Leo". Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2013. http://d-nb.info/1068152850/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Brückner, R., V. G. Lyssenko, S. Hofmann i K. Leo. "Lasing of Tamm states in highly efficient organic devices based on small-molecule organic semiconductors". Royal Society of Chemistry, 2014. https://tud.qucosa.de/id/qucosa%3A36129.

Pełny tekst źródła

Streszczenie:

We discuss approaches to increase the light outcoupling efficiency in organic microcavity (MC) lasers and organic light-emitting diodes (OLEDs). We find that the introduction of metals into the cavities leads to additional Tamm-plasmon polariton modes, while the corrugation of metal contacts, such as perforated m-size holes or a periodic array of metal stripes, leads to 2D confinement of the cavity modes, which in turn reduces the lasing threshold in MCs. Furthermore, we elucidate light loss mechanisms in OLEDs and reveal how external dielectric layers and periodic gratings can be used to enhance outcoupling from the OLED cavity.

Style APA, Harvard, Vancouver, ISO itp.

Buller, Jakov. "Structure and Dynamics of Microcavity Exciton-Polaritons in Acoustic Square Lattices". Doctoral thesis, Humboldt-Universität zu Berlin, 2018. http://dx.doi.org/10.18452/19328.

Pełny tekst źródła

Streszczenie:

Exziton-Polaritonen in Mikrokavitäten sind Quasi-Teilchen, die unter bestimmten physikalischen Konditionen kondensieren und damit in einen energetisch gleichen, gemeinsamen makroskopischen Quantenzustand (MQZ) übergehen können. Exziton-Polariton-Kondensate können mithilfe von akustischen Oberflächenwellen moduliert werden, um ihre Eigenschaften zu verändern. Dies ist insbesondere von großer Relevanz für zukünftige Anwendungen. In dieser Arbeit wurden die Struktur sowie die Dynamik der Exziton-Polariton-Kondensate in den durch die akustischen Oberflächenwellen erzeugten quadratischen Gittern untersucht. Es wurde dazu die Wellenfunktion der Exziton-Polariton-Kondensate im Rahmen der spektroskopischen und zeitaufgelösten Messungen im Orts- und Impulsraum abgebildet. Die MQZ wurden in einer optisch-parametrischen Oszillatorkonfiguration resonant angeregt. Die spektroskopischen Messungen zeigten, dass Exziton-Polariton-Kondensate in akustischen quadratischen Gittern aus unterschiedlichen MQZ, nämlich aus einem zwei-dimensionalen Gap-Soliton (2D GS) umgeben von mehreren ein-dimensionalen MQZ, und einem inkohärenten Strahlungshintergrund zusammengesetzt sind. Im Rahmen der zeitaufgelösten Experimente wurde die Dynamik der Wellenfunktion des 2D GS untersucht. Die zeitaufgelösten Ergebnisse zeigten, dass sowohl die Intensität der von dem 2D GS emittierten Photolumineszenz (PL) als auch die Kohärenzlänge des 2D GS zeitlich oszillieren. Die Intensität der PL und die Kohärenzlänge hängen von der Anregungsleistung, der Größe des Laserspots sowie von der relativen Position des akustischen Gitters und dem Laserspot ab. Im Ausblick dieser Arbeit wurde theoretisch die Anregung von Tamm-Plasmon/Exziton- Polaritonen (TPEP) sowie deren Modulation mithilfe von akustischen Oberflächenwellen diskutiert. TPEP entstehen durch die Superposition der in der Grenzschicht zwischen Mikrokavität und Metall angeregten Tamm-Plasmonen und den in der Mikrokavität erzeugten Exziton-Polaritonen.
Microcavity (MC) exciton-polaritons can form condensates, i.e. macroscopic quantum states (MQSs), as well under a periodic potential modulation. The modulation by a surface acoustic wave (SAW) provides a powerful tool for the formation of tunable lattices of MQSs in semiconductor MC. In this work, fundamental aspects of the structure and dynamics of exciton-polariton condensate in acoustic square lattices were investigated by probing its wavefunction in real- and momentum space using spectral- and time-resolved studies. The MQSs were resonantly excited in an optical parametric oscillator configuration. The tomographic study revealed that the exciton-polariton condensate structure self-organises in a concentric structure, which consists of a single, two-dimensional gap soliton (2D GS) surrounded by one-dimensional MQSs and an incoherent background. 2D GS size tends to saturate with increasing particle density. The experimental results are supported by a theoretical model based on the variational solution of the Gross-Pitaevskii equation. Time-resolved studies showed the evolution of the 2D GS wavefunction at the acoustic velocity. Interestingly, the photoluminescence (PL) intensity emitted by the 2D GS as well as its coherence length oscillate with time. The PL oscillation amplitude depends on the intensity and the size of the exciting laser spot, and increases considerably for excitation intensities close to the optical threshold power for the formation of the MQS. In the outlook, the formation of Tamm-Plasmon/Exciton-Polariton (TPEP) hybrid states and their modulation by SAWs was theoretically discussed. Here, the upper DBR is partly replaced by a thin metal layer placed on top of the MC. In this case, TPEP form by the superposition of Tamm plasmons at the metal-semiconductor interface and the exciton-polaritons in the MC.

Style APA, Harvard, Vancouver, ISO itp.

Khan, Mughees Mahmood. "Fabrication and testing of nano-optical structures for advanced photonics and quantum information processing applications". [College Station, Tex. : Texas A&M University, 2006. http://hdl.handle.net/1969.1/ETD-TAMU-1165.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

STELLA, UGO. "Light manipulation in multilayered photonic structures". Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2842499.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Mischok, Andreas, Robert Brückner, Hartmut Fröb, Vadim G. Lyssenko i Karl Leo. "Photonic lattices in organic microcavities: Bloch states and control of lasing". SPIE, 2015. https://tud.qucosa.de/id/qucosa%3A35053.

Pełny tekst źródła

Streszczenie:

Organic microcavities comprising the host:guest emitter system Alq3:DCM offer an interesting playground to experimentally study the dispersion characteristics of laterally patterned microlasers due to the broad emission spectrum and large oscillator strength of the organic dye. By structuring of metallic or dielectric sublayers directly on top of the bottom mirror, we precisely manipulate the mode structure and in fluence the coherent emission properties of the device. Embedding silver layers into a microcavity leads to an interaction of the optical cavity-state in the organic layer and the neighboring metal which red-shifts the cavity resonance, creating a Tamm-plasmon-polariton state. A patterning of the metal can in turn be exploited to fabricate deep photonic wells of micron-size, efficiently confining light in lateral direction. In periodic arrays of silver wires, we create a Kronig-Penney-like optical potential in the cavity and in turn observe optical Bloch states spanning over several photonic wires. We modify the Kronig-Penney theory to analytically describe the full far-field emission dispersion of our cavities and show the emergence of either zero- , π-, or 2π- phase-locking in the system. By investigating periodic SiO2 patterns, we experimentally observe stimulated emission from the ground and different excited discrete states at room temperature and are able to directly control the laser emission from both extended and confined modes of the photonic wires at room-temperature.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Plasmons Tamm"

Panda, Abinash, i Puspa Devi Pukhrambam. "Study of Metal-Porous GaN-Based 1D Photonic Crystal Tamm Plasmon Sensor for Detection of Fat Concentrations in Milk". W Lecture Notes in Electrical Engineering, 415–25. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2308-1_42.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gubaydullin, A. R., C. Symonds, J. Bellessa, K. A. Ivanov, E. D. Kolykhalova, M. E. Sasin, A. Lemaitre, P. Senellart, G. Pozina i M. A. Kaliteevski. "PURCELL EFFECT IN TAMM PLASMON STRUCTURES". W Physics, Chemistry and Application of Nanostructures, 85–88. WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813224537_0020.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hasegawa, Akira, i Yuji Kodama. "Modulation Instability". W Solitons in Optical Communications, 282–97. Oxford University PressOxford, 1995. http://dx.doi.org/10.1093/oso/9780198565079.003.0015.

Pełny tekst źródła

Streszczenie:

Abstract A continuous wave with a cubic nonlinearity in an anomalous dispersion regime is known to develop instability with respect to small modulations in amplitude or in phase, called modulational instability. The phenomenon of modulational instability was discovered in fluids (Ostrovskii 1963, 1966; Whitham 1965; Benjamin and Feir 1967), in nonlinear optics (Bespalov and Talanov 1966; Karpman 1967), and in plasmas (Taniuti and Washimi 1968; Tam 1969; Hasegawa 1970, 1971). Modulational instability of a light wave in a fibre was suggested by Hasegawa and Brinkman (1980) as a means to generate a far infrared light source. Akhmediev et al. (1986, 1987) studied the modulational instability by constructing exact periodic solutions of the NLS equation. The first experimental verification of the modulational instability of a light wave in a fibre was made by Tai et al. (1986a). The modulational instability can also be induced by a mixture of a small amplitude light waves with the frequency separation (with respect to the carrier cw wave) falling into the sideband frequency range of instability (Hasegawa 1984). This induced modulational instability can be used to generate an ultra short pulse train with a desired repetition rate. The first experimental evidence of an induced modulational instability was also produced by Tai et al. (1986b). Modulational instability can also be produced by cross phase modulation (Berkhoer and Zakharov 1970; Agrawal 1987). This chapter is devoted to presenting theoretical and experimental analyses of modulational instabilities in fibres.

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Plasmons Tamm"

Ye, Ming-Jyun, Satoshi Ishii i Kuo-Ping Chen. "Revisable Tuning of Tamm Plasmon Polaritons". W JSAP-Optica Joint Symposia, 19a_P08_6. Washington, D.C.: Optica Publishing Group, 2024. https://doi.org/10.1364/jsapo.2024.19a_p08_6.

Pełny tekst źródła

Streszczenie:

Phase-change materials (PCMs) provide a specific combination of properties. The binary semiconducting chalcogenide Sb2S3 is consider one of the promising candidates, especially its intrinsic high refractive index, low loss and wide bandgap properties, in near infrared (NIR). Here, the Sb2S3 transformation from amorphous to crystal state embedded between the distribute Bragg reflector (DBR) and metal layer. At the interface between DBR and metal layer in specific parameter, Phase-change Tamm plasmon–polariton (PC-TPP) resonance could be produce. The PC-TPP resonance has a 70 nm modulation wavelength. Also, the resonance achieves around 100 nm-shifted in NIR at the proper incident angle.

Style APA, Harvard, Vancouver, ISO itp.

Berguiga, Lotfi, Théo Girerd, Fabien Mandorlo, Cécile Jamois, Taha Benyattou, Xavier Letartre i Lydie Ferrier. "Enhancing phase sensitivy by approaching the critical coupling of resonant metasurface sensor". W Optical Sensors, SM1H.7. Washington, D.C.: Optica Publishing Group, 2024. https://doi.org/10.1364/sensors.2024.sm1h.7.

Pełny tekst źródła

Streszczenie:

Very high sensitive photonic sensor with phase interrogation is achieved by approaching the critical coupling by tuning the geometry of the nanostructured Tamm plasmon photonic crystal. Theoretical and experimental proofs are presented.

Style APA, Harvard, Vancouver, ISO itp.

Ko, Joo Hwan, Dong Hyun Seo, Se Yeon Kim i Young Min Song. "Electrically Programable Tamm Plasmon for Broadband Optical Neuromorphic Computing". W 2024 International Conference on Optical MEMS and Nanophotonics (OMN), 1–2. IEEE, 2024. http://dx.doi.org/10.1109/omn61224.2024.10685224.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chen, Kuo-Ping. "Tunable bound states in the continuum in Tamm plasmon and metasurface lasers". W Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XXII, redaktorzy Yu-Jung Lu i Takuo Tanaka, 36. SPIE, 2024. http://dx.doi.org/10.1117/12.3028348.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kulanthaivel, Jayakrishnan, V. Hitaishi i Ashok Nandam. "A Metal-DBR Interface Structure-Based Tamm Plasmon Sensor for Refractive Index Sensing Applications". W 2023 IEEE Workshop on Recent Advances in Photonics (WRAP), 1–3. IEEE, 2023. http://dx.doi.org/10.1109/wrap59682.2023.10712807.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Durach, Maxim, i David W. Keene. "Hyperbolic Tamm Plasmons". W Frontiers in Optics. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/fio.2014.fth3e.3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Reshetnyak, Victor, Timothy Bunning i Dean Evans. "Using Liquid Crystals To Control Tamm Plasmons". W 2020 IEEE Research and Applications of Photonics in Defense Conference (RAPID). IEEE, 2020. http://dx.doi.org/10.1109/rapid49481.2020.9195651.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Feng, F., S. Portalupi, X. Lafosse, A. Raj Dhawan, W. Daney de Marcillac, J. M. Frigerio, C. Schwob i in. "Coupling colloidal nanocrystals to Optical Tamm plasmons". W 2015 17th International Conference on Transparent Optical Networks (ICTON). IEEE, 2015. http://dx.doi.org/10.1109/icton.2015.7193580.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Afinogenov, B. I., V. O. Bessonov i A. A. Fedyanin. "Sub-picosecond all-optical switching of Tamm plasmons". W ADVANCES IN ELECTRICAL AND ELECTRONIC ENGINEERING: FROM THEORY TO APPLICATIONS: Proceedings of the International Conference on Electrical and Electronic Engineering (IC3E 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.4998030.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ferrier, Lydie, Cécile Jamois, Clémentine Symonds, Joël Bellessa i Taha Benyattou. "Tailoring Bloch modes in Tamm plasmons structures (Conference Presentation)". W High Contrast Metastructures VI, redaktorzy Connie J. Chang-Hasnain, Fumio Koyama, Weimin Zhou i Andrei Faraon. SPIE, 2017. http://dx.doi.org/10.1117/12.2250319.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!