Gotowa bibliografia na temat „Piezoresistive transducer”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Piezoresistive transducer”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Piezoresistive transducer"
Pereira, Ricardo dos Santos, i Carlos Alberto Cima. "Thermal Compensation Method for Piezoresistive Pressure Transducer". IEEE Transactions on Instrumentation and Measurement 70 (2021): 1–7. http://dx.doi.org/10.1109/tim.2021.3092789.
Pełny tekst źródłaStiefvater, Jason, Yuhong Kang, Albrey de Clerck, Shuo Mao, Noah Jones, Josh Deem, Alfred Wicks, Hang Ruan i Wing Ng. "Dual-Use Strain Sensors for Acoustic Emission and Quasi-Static Bending Measurements". Sensors 24, nr 5 (2.03.2024): 1637. http://dx.doi.org/10.3390/s24051637.
Pełny tekst źródłaRollins, Kyle M., J. Dusty Lane, Emily Dibb, Scott A. Ashford i A. Gray Mullins. "Pore Pressure Measurement in Blast-Induced Liquefaction Experiments". Transportation Research Record: Journal of the Transportation Research Board 1936, nr 1 (styczeń 2005): 210–20. http://dx.doi.org/10.1177/0361198105193600124.
Pełny tekst źródłaBayram, Ferhat, Durga Gajula, Digangana Khan i Goutam Koley. "Investigation of AlGaN/GaN HFET and VO2 Thin Film Based Deflection Transducers Embedded in GaN Microcantilevers". Micromachines 11, nr 9 (20.09.2020): 875. http://dx.doi.org/10.3390/mi11090875.
Pełny tekst źródłaAlmassri, Ahmed M., W. Z. Wan Hasan, S. A. Ahmad, A. J. Ishak, A. M. Ghazali, D. N. Talib i Chikamune Wada. "Pressure Sensor: State of the Art, Design, and Application for Robotic Hand". Journal of Sensors 2015 (2015): 1–12. http://dx.doi.org/10.1155/2015/846487.
Pełny tekst źródłaSøndergård, Ole, i Peter Gravesen. "A new piezoresistive pressure transducer principle with improvements in media compatibility". Journal of Micromechanics and Microengineering 6, nr 1 (1.03.1996): 105–7. http://dx.doi.org/10.1088/0960-1317/6/1/025.
Pełny tekst źródłaAparna, Dr K. Durga, K. L. V. Nagasree i G. Lalitha Devi. "Design and Fabrication of Mems U-Shaped Cantilever". International Journal of Recent Technology and Engineering (IJRTE) 11, nr 6 (30.03.2023): 80–83. http://dx.doi.org/10.35940/ijrte.f7496.0311623.
Pełny tekst źródłaTong, Zhao Jing, Xiu Hua Shi, Xiang Dang Du, Sheng Wu Wang i Tian Peng He. "Temperature Compensation System of Diesel Engine Piezoresistive Pressure Transducer Based on Neural Networks and LabVIEW". Applied Mechanics and Materials 241-244 (grudzień 2012): 833–36. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.833.
Pełny tekst źródłaFroemel, Joerg, Gildas Diguet i Masanori Muroyama. "Micromechanical Force Sensor Using the Stress–Impedance Effect of Soft Magnetic FeCuNbSiB". Sensors 21, nr 22 (15.11.2021): 7578. http://dx.doi.org/10.3390/s21227578.
Pełny tekst źródłaChartrand, D. A., T. H. Ye, J. M. Maarek i H. K. Chang. "Measurement of pleural pressure at low and high frequencies in normal rabbits". Journal of Applied Physiology 63, nr 3 (1.09.1987): 1142–46. http://dx.doi.org/10.1152/jappl.1987.63.3.1142.
Pełny tekst źródłaRozprawy doktorskie na temat "Piezoresistive transducer"
Wu, Hankai. "Développement de transducteurs piézo-résistifs sur substrat textile pour caractérisation de flux d'air". Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2024. http://www.theses.fr/2024IMTA0405.
Pełny tekst źródłaThe aim of this work is to develop a pressure drop detecting system, which is to be integrated onto an air filter in an air handling unit (AHU). Indeed, filter pressure drop increases with the duration of use, and theevolution has a significant impact on the energy consumption of AHU. A measurement system has been developed using commercial sensors connected to a microcontroller. But this system is not permeable to airflow. A textile sensing solution, based on the piezoresistive phenomenon, was therefore proposed and developed. The textile substrate chosen was elastane, because of its elasticity and ability to deform under low stress. This material was functionalized by two techniques with a π conjugated polymer, poly(3,4-ethylenedioxythiophene), possessing semiconducting properties and bringing exploitable conductivity to a unitary textile yarn over lengths of the order of a meter. These functionalized textile yarns were characterized mechanically, morphologically, electrically and electromechanically. The results demonstrated the affinity of the conductive layer to the textile substrate, and training procedures were established to improve electromechanical responses at 5% elongation. Finally, preliminary detection tests on a laboratory-scale ventilation duct and on an industrial-scale AHU concluded that these yarns could discriminate air velocities ranging from 1 to 3 m/s
Rafael, Rémi. "Étude des propriétés piézorésistives de jonctions tunnel MIM pour la réalisation de jauges de déformations". Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI105/document.
Pełny tekst źródłaNew applications are emerging with de development of flexible electronic like flexible touch panels and wearable movement sensors. The well mastered silicon technologies are ill adapted to these uses (low maximal elongation, high fabrication temperatures). In this context, it is necessary to develop new types of strain gauges. Numerous possibilities have been studied that can be divided in two main categories: nanosomic transducers and composite transducers. In this work, we study the possibility to use a MIM (Metal Insulator Metal) tunnel junction as strain gauge. This kind of structure is very unusual in the literature were the only similar article are based on MIS (Metal Insulator Semiconductor) junctions. The objectives of this thesis are thus the understanding of the piezorisistive properties of MIM structures, the optimisation of their sensitivity, and the realisation of a sensor prototype exploiting plastonic technologies
Law, Jesse Townsend. "Application of the van der Pauw structure as a piezoresistive pressure sensor a numerical study /". Thesis, Montana State University, 2007. http://etd.lib.montana.edu/etd/2007/law/LawJ0807.pdf.
Pełny tekst źródłaNaeli, Kianoush. "Optimization of piezoresistive cantilevers for static and dynamic sensing applications". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28247.
Pełny tekst źródłaCommittee Chair: Brand, Oliver; Committee Member: Adibi, Ali; Committee Member: Allen, Mark G.; Committee Member: Bottomley, Lawrence A.; Committee Member: Degertekin, F. Levent.
White, N. M. "A study of the piezoresistive effect in thick-film resistors and its application to load transduction". Thesis, University of Southampton, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.384433.
Pełny tekst źródłaCoraucci, Guilherme de Oliveira. "Sensor de pressão microeletronico baseado no efeito piezoresistivo transversal em silicio". [s.n.], 2008. http://repositorio.unicamp.br/jspui/handle/REPOSIP/259037.
Pełny tekst źródłaDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação
Made available in DSpace on 2018-08-12T17:39:52Z (GMT). No. of bitstreams: 1 Coraucci_GuilhermedeOliveira_M.pdf: 8439243 bytes, checksum: d062ad2bf9b0e8eaae04ac2443802dab (MD5) Previous issue date: 2008
Resumo: Apresentamos neste trabalho um sensor de pressão piezorresistivo de multiterminais totalmente compatível com o processo de fabricação CMOS, constituído de um piezoelemento sensível ao estresse mecânico disposto sobre uma membrana microfabricada. O layout deste piezoelemento permite maximizar o efeito do estresse mecânico sobre a deflexão das equipotenciais distribuídas sobre sua região ativa. Utilizamos a análise baseada no Método de Elementos Finitos no projeto da membrana, bem como na definição da disposição dos piezoelementos sobre a mesma. O sensor foi fabricado em duas tecnologias diferentes: CMOS 0,3 ?m MAS (Austria Mikro Systeme International) - disponibilizado pelo Projeto Multi-Usuário PMU-FAPESP - e CCS/Unicamp (Centro de Componentes Semicondutores da Unicamp). Realizamos a membrana, no sensor fabricado na tecnologia AMS, através de um processo de desbaste mecânico da pastilha de silício. Já para o sensor fabricado na tecnologia do CCS/Unicamp, utilizamos um aparato de corrosão química (solução de KOH) para corrosão anisotrópica do silício monocristalino e, desta forma, obtivemos uma membrana com maior qualidade. Realizamos o estudo, analítico e numérico, da dependência da tensão de saída do piezoelemento de multiterminais com relação ao estresse mecânico. Os sensores fabricados apresentaram sensibilidade proporcional ao número de contatoscorrente de entrada e pouca dependência desta sensibilidade com sua geometria para uma grande faixa de variação de suas dimensões. Na tecnologia AMS, o sensor apresentou uma sensibilidade de 0,24 mV/psi e na tecnologia CCS/Unicamp 4,8 mV/psi com linearidade máxima de aproximadamente 5,6% FSO
Abstract: This work describes a CMOS-Compatible multiterminal piezoresistive pressure sensor based on the transversal piezoresistive effect, which consists of a piezotransducer fabricated on a membrane. The layout of this piezoelement is designed in such a way that its sensitivity is improved by maximizing the effect of the mechanical stress over the equipotential lines distribution in its active region. We performed Element Finite analyses in both membrane and piezoelement designs. The sensor was fabricated using two different technologies: CMOS 0,35 ?m AMS process (Austria Mikro Systeme International) - supported by the Fapesp Multi-User Project - and CCS/Unicamp process (Center for Semiconductor Components). In the AMS process, we realized a diaphragm by reducing the thickness of the die through a mechanical polishing process. In the sensor fabricated at CCS/Unicamp process, a backside bulk micro-machining was performed by using an automated KOH chemical etching apparatus, which provides a well-controlled anisotropic etching process. The sensor sensitivity is proportional to the number of input current terminals. The sensor sensitivity dependence related to its geometry is minimized even for a wide range of the sensor layout's aspect-ratio. In the AMS process, sensor's sensitivity amounted to 0.24 mV/psi and in the CCS/Unicamp process the sensitivity amounted to 4,8 mV/psi with a maximum linearity of about 5,6% FSO
Mestrado
Eletrônica, Microeletrônica e Optoeletrônica
Mestre em Engenharia Elétrica
Cassel, Robert Douglas. "Design, fabrication, and testing of the van der Paw piezoresistive structure for pressure sensing". 2008. http://etd.lib.montana.edu/etd/2008/cassel/CasselR0508.pdf.
Pełny tekst źródłaKsiążki na temat "Piezoresistive transducer"
Total Dose Effects of Ionizing and Non-Ionizing Radiation on Piezoresistive Pressure Transducer Chips. Storming Media, 2003.
Znajdź pełny tekst źródłaFluctuating pressures measured beneath a high-temperature, turbulent boundary layer on a flat plate at a Mach number of 5. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.
Znajdź pełny tekst źródłaCzęści książek na temat "Piezoresistive transducer"
Adams, Thomas M., i Richard A. Layton. "Piezoresistive transducers". W Introductory MEMS, 211–30. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-09511-0_8.
Pełny tekst źródłaLenk, Claudia, Kalpan Ved, Steve Durstewitz, Tzvetan Ivanov, Martin Ziegler i Philipp Hövel. "Bio-inspired, Neuromorphic Acoustic Sensing". W Springer Series on Bio- and Neurosystems, 287–315. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-36705-2_12.
Pełny tekst źródłaWhittier, Robert M. "High Performance Miniaturized Piezoresistive Pressure Transducers". W Micro System Technologies 90, 587–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_83.
Pełny tekst źródłaLiang, Yiching A., Su-Wen Ueng i Thomas W. Kenny. "Performance Characterization of Ultra-Thin N-Type Piezoresistive Cantilevers". W Transducers ’01 Eurosensors XV, 970–73. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_229.
Pełny tekst źródłaSchwizer, Jürg, Michael Mayer, Oliver Brand i Henry Baltes. "Analysis of Ultrasonic Wire Bonding by In-situ Piezoresistive Microsensors". W Transducers ’01 Eurosensors XV, 1398–401. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_330.
Pełny tekst źródłaWu, C. H., S. Stefanescu, H. I. Kuo, C. A. Zorman i M. Mehregany. "Fabrication and Testing of Single Crystalline 3C-SiC Piezoresistive Pressure Sensors". W Transducers ’01 Eurosensors XV, 514–17. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_122.
Pełny tekst źródłaPruitt, Beth, Dae-Han Choi, Jeff Florando, Rod Martens, Stuart Wenzel, Carl Reynolds, William Nix i Thomas Kenny. "Low Force Electrical Contact Measurements Using Piezoresistive MEMS Cantilevers to Characterize Thin-Film Metallization". W Transducers ’01 Eurosensors XV, 1004–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_237.
Pełny tekst źródłavon Berg, Jochen, Marco Gnielka, Claudio Cavalloni, Thomas Boltshauser, Thomas Diepold, Biswajit Mukhopadhyay i Ernst Obermeier. "A Piezoresistive Low-Pressure Sensor Fabricated Using Silicon-on-Insulator (SOI) for Harsh Environment Applications". W Transducers ’01 Eurosensors XV, 482–85. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_114.
Pełny tekst źródłaBourouina, Tarik, Eric Lebrasseur, Gilbert Reyne, Hiroyuki Fujita, Takahisa Masuzawa, Alfred Ludwig, Eckhard Quandt, Hideo Muro, Takahiko Oki i Akira Asaoka. "A Novel Optical Scanner with Integrated Two-Dimensional Magnetostrictive Actuation and Two-Dimensional Piezoresistive Detection". W Transducers ’01 Eurosensors XV, 1300–1303. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_306.
Pełny tekst źródłaClark, D. L. "Temperature Compensation for Piezoresistive Pressure Transducers at Cryogenic Temperatures". W Advances in Cryogenic Engineering, 1447–52. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3368-9_80.
Pełny tekst źródłaStreszczenia konferencji na temat "Piezoresistive transducer"
Chen, Steven, i J. Albert Chiou. "Hall Sensors Using Piezoresistive Transducer Fabrication Process". W ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13592.
Pełny tekst źródłaDavaji, Benyamin, Shrinidhi Kulkarni, Visarute Pinrod, Alexander Ruyack i Amit Lal. "Piezoresistive Graphene SAW Transducer". W 2018 IEEE International Ultrasonics Symposium (IUS). IEEE, 2018. http://dx.doi.org/10.1109/ultsym.2018.8579639.
Pełny tekst źródłaNishida, Toshikazu, Robert Dieme, Mark Sheplak i Gijs Bosman. "Noise Modeling and Characterization of Piezoresistive Transducers". W ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15392.
Pełny tekst źródłaHurst, Adam M., Timothy R. Olsen, Scott Goodman, Joe VanDeWeert i Tonghuo Shang. "An Experimental Frequency Response Characterization of MEMS Piezoresistive Pressure Transducers". W ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-27159.
Pełny tekst źródła"Four-terminal piezoresistive transducer: Theory and perspectives". W 2009 International Student School and Seminar on Modern Problems of Nanoelectronics, Micro- and Nanosystem Technologies (INTERNANO). IEEE, 2009. http://dx.doi.org/10.1109/internano.2009.5335610.
Pełny tekst źródłaTalukdar, Abdul, i Goutam Koley. "Gated piezoresistive GaN microcantilever as an acoustic transducer". W 2014 72nd Annual Device Research Conference (DRC). IEEE, 2014. http://dx.doi.org/10.1109/drc.2014.6872292.
Pełny tekst źródłaSangtong, Suttisak, i Apinunt Thanachayanont. "Low-voltage CMOS instrumentation amplifier for piezoresistive transducer". W TENCON 2005 - 2005 IEEE Region 10 Conference. IEEE, 2005. http://dx.doi.org/10.1109/tencon.2005.301274.
Pełny tekst źródłaDempsey, Adam B., Patrick J. Seiler i Simon Johnson. "Comparison of Cylinder Pressure Measurements on a Heavy-Duty Diesel Engine Using a Switching Adapter". W ASME 2018 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icef2018-9776.
Pełny tekst źródłaHurst, Adam M., Anthony D. Kurtz i Boaz Kochman. "High Temperature Static and Dynamic Pressure Transducer for Combustion Instability Control Using Acoustic Low-Pass Filter Structures". W ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51522.
Pełny tekst źródłaXu Song i Sheng Liu. "A performance prediction model for a piezoresistive transducer pressure sensor". W ICEPT 2003. Fifth International Conference on Electronic Packaging Technology. Proceedings. IEEE, 2003. http://dx.doi.org/10.1109/eptc.2003.1298688.
Pełny tekst źródła