Gotowa bibliografia na temat „Physical foaming”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Physical foaming”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Physical foaming"
Ogawa, Yuji, Didier Huin, Henri Gaye i Naoki Tokumitsu. "Physical Model of Slag Foaming." ISIJ International 33, nr 1 (1993): 224–32. http://dx.doi.org/10.2355/isijinternational.33.224.
Pełny tekst źródłaLi, Qi Jin, Guo Zhong Li i Cong Cong Jiang. "Study on the Properties of Physical and Chemical Foaming Concrete". Advanced Materials Research 549 (lipiec 2012): 741–44. http://dx.doi.org/10.4028/www.scientific.net/amr.549.741.
Pełny tekst źródłaGhag, Surinder S., Peter C. Hayes i Hae-Geon Lee. "Physical Model Studies on Slag Foaming." ISIJ International 38, nr 11 (1998): 1201–7. http://dx.doi.org/10.2355/isijinternational.38.1201.
Pełny tekst źródłaПопов, Александр, Aleksandr Popov, В. В. Нелюбова, Viktoriya Nelyubova, Д. Нецвет i Dar'ya Necvet. "THE INFLUENCE OF THE FOAMING AGENTS NATURE ON PHYSICAL AND TECHNICAL PROPERTIES OF FOAM". Bulletin of Belgorod State Technological University named after. V. G. Shukhov 3, nr 3 (25.03.2018): 5–12. http://dx.doi.org/10.12737/article_5abfc9b7ce94e3.70688983.
Pełny tekst źródłaLlewelyn, Rees, Griffiths i Jacobi. "A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes". Polymers 11, nr 11 (17.11.2019): 1896. http://dx.doi.org/10.3390/polym11111896.
Pełny tekst źródłaXalikovna, Musaeva Rano, Uvayzov Said Komilovich, Musaeva Nigina Xamidovna, Qo’ldosheva Feruza Salimovna i Akramov Doston Rustam Ugli. "RESEARCH AND EXPERIMENTAL DETERMINATION OF THERMO PHYSICAL PROPERTIESOF HIGHLY FOAMING SOLUTION". International Journal of Psychosocial Rehabilitation 24, nr 04 (28.02.2020): 1918–28. http://dx.doi.org/10.37200/ijpr/v24i4/pr201300.
Pełny tekst źródłaLiu, Fu-Min, i An-Lin Wang. "Numerical Investigation on Physical Foaming and Decay Process Using Multicomponent Thermal Lattice Boltzmann Model". MATEC Web of Conferences 237 (2018): 02003. http://dx.doi.org/10.1051/matecconf/201823702003.
Pełny tekst źródłaZhang, Guangchun, Yuanliang Wang, Haiping Xing, Jian Qiu, Jiang Gong, Kun Yao, Haiying Tan, Zhiwei Jiang i Tao Tang. "Interplay between the composition of LLDPE/PS blends and their compatibilization with polyethylene-graft-polystyrene in the foaming behaviour". RSC Advances 5, nr 34 (2015): 27181–89. http://dx.doi.org/10.1039/c4ra16084c.
Pełny tekst źródłaZhai, Chenxi, Yang Yu, Yumei Zhu, Jing Zhang, Ying Zhong, Jingjie Yeo i Mingchao Wang. "The Impact of Foaming Effect on the Physical and Mechanical Properties of Foam Glasses with Molecular-Level Insights". Molecules 27, nr 3 (27.01.2022): 876. http://dx.doi.org/10.3390/molecules27030876.
Pełny tekst źródłaSun, Qiang, Guan Bao Huang, Jun Hui Ji i Chang An Zhang. "Preparation of Poly(Butylene succinate)(PBS) Foaming Materials". Advanced Materials Research 287-290 (lipiec 2011): 1805–10. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.1805.
Pełny tekst źródłaRozprawy doktorskie na temat "Physical foaming"
Gong, Pengjian. "PHYSICAL FOAMING BEHAVIOR AT THE INTERFACE OF POLYMER BLENDS-Foaming Mechanism and its Application-". 京都大学 (Kyoto University), 2013. http://hdl.handle.net/2433/180507.
Pełny tekst źródłaPurcell, Matthew S. "Supercritical fluid foaming : a novel route to polymeric allografts?" Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14198/.
Pełny tekst źródłaSharudin, Rahida Wati Binti. "Carbon Dioxide Physical Foaming of Polymer Blends:-Blend Morphology and Cellular Structure-". 京都大学 (Kyoto University), 2012. http://hdl.handle.net/2433/161019.
Pełny tekst źródłaPhianmongkhol, Aphirak. "Characterisation of protein foams using a method based on conductivity measurement and measurement of physical properties of protein solutions relevant to foaming behaviour". Thesis, University of Reading, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326975.
Pełny tekst źródłaJiraporn, Sirison. "Studies on functional properties of soy lipophilic protein and its potential for food applications". Doctoral thesis, Kyoto University, 2021. http://hdl.handle.net/2433/263363.
Pełny tekst źródłaRainglet, Benoit. "Etude du moussage par CO2 de polypropylène et de TPV en autoclave et par extrusion : formulation, rhéologie et modélisation". Electronic Thesis or Diss., Lyon, 2021. http://www.theses.fr/2021LYSES029.
Pełny tekst źródłaWork on the physical foaming of vulcanised polyolefins and thermoplastics (TPV) by the addition of supercritical CO2, whether by continuous process (extrusion) or by batch process (reactor).Through the formulation, rheological study and foaming of existing and new polymers, a rheological criterion for defining the ability to foam was demonstrated and extended to complex polymer blends (as TPV). More specifically, the study of TPV formulation on foaming was investigated .Conclusions regarding cross-linking chemistry and addition of fillers were determined.Numerical modelling and implementation of extrusion foaming were carried out and demonstrated the possibility of obtaining a regular and homogeneous foam as well as predicting, depending on the input parameters, the final characteristics of the foam
Ercoli, Roberto. "Chemical neutralization of industrial by-products from the secondary aluminum industry: re-use as foaming agents for the synthesis of geopolymers and monitoring of the hydrogen-rich gas production". Doctoral thesis, Urbino, 2022. http://hdl.handle.net/11576/2698511.
Pełny tekst źródłaAlbertsson, Galina. "Effect of the presence of a dispersed phase (solid particles, gas bubbles) on the viscosity of slag". Thesis, KTH, Mikro-modellering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133495.
Pełny tekst źródłaAlhasan, Ahmad Abdulraheem. "Low Temperature Characterization of Foamed Warm Mix Asphalt". University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1374676401.
Pełny tekst źródłaCHANG, CHIH-CHE, i 張誌哲. "Effect of Nucleating Agent on EVA Foaming Material under Supercritical Fluid Physical Foaming". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/ew7pz3.
Pełny tekst źródła逢甲大學
纖維與複合材料學系
105
In this study, using calcium carbonate, talc and white carbon black add to EVA, and studied its physical properties after foaming by supercritical fluid carbon dioxide, In view of the traditional chemical foaming system requires high temperature and a long time to achieve the complete reaction decomposition of chemical foaming agent,This experiment mainly uses less than the traditional chemical foaming of the processing temperature and time on different formulations to foaming it. By changing the amount of different powder added, discussion the effect of tensile strength, tear strength, elongation, density, expansion ratio, and surface hardness, under different content, the relationship between the expansion ratio and the above physical properties is also discussed, and the surface condition and cell structure were observed by optical microscope and SEM. The first step in this article use calcium carbonate, talc, white carbon black for the addition of different content, measure the relationship between the amount of change and the various physical properties, and then according to the different expansion ratio to explore its trend with a variety of physical properties and observing its surface structure and bubble structure in the same time. The second part is compare that the selection of calcium carbonate filled with 10 unit of the foam material and the EVA630 chemical foam materials that refer by literature, Compare the two similarities and differences. The results show that under supercritical fluid, foaming can be successfully performed at low temperature and low pressure, the comprehensive conditions and performance are better than ADC chemical foaming. The different nucleating agents also have different effects on the foamed material, filled with talc and white carbon black, both in tensile strength, tear strength, elongation properties, reinforcement effect and extension performance Comprehensive performance observation, mostly better than the calcium carbonate system, especially the addition of white carbon black in the tensile strength has especially good performance, Talc powder in the tear performance has a good cost-effective. No matter what kind of powder to add, the expansion ratio is negatively correlated with mechanical strength and surface hardness, has a positive correlation with elongation. Optical microscopy and SEM analysis of the observation can be seen that the addition of powder can significantly help the nucleation and growth of bubbles, among them, white carbon black system added to the material let the bubble to achieve the smallest and ideal case, but whether the material surface or internal observation, can be found reunion occurred.
Części książek na temat "Physical foaming"
Li, Furong, Zhicheng Sun, Shouzheng Jiao, Zixiong Que, Xiaoyang Du, Ruping Liu, Siyu He, Shiyi Wang i Luhai Li. "Study on the Printability of Chemical and Physical Foaming Inks". W Lecture Notes in Electrical Engineering, 675–81. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1864-5_92.
Pełny tekst źródłaLakshmi, V. V. K., V. Arun Vikram, K. V. Subbaiah, K. Suresh i B. Surendra Babu. "Effect of Exfoliated Vermiculite as Thickening and Foaming Agent on the Physical Properties of Aluminium Foam". W Advances in Applied Mechanical Engineering, 853–60. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1201-8_91.
Pełny tekst źródłaSun, Xiaowei, Miao Gao, Honghong Zhou, Jing Lv i Zhaoyang Ding. "Influence of Fiber on Properties of Graphite Tailings Foam Concrete". W Lecture Notes in Civil Engineering, 508–15. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_46.
Pełny tekst źródłaKoczo, Kalman, Mark D. Leatherman, Kevin Hughes i Don Knobloch. "Foaming Chemistry and Physics". W Lubricant Additives, 337–84. Third edition. | Boca Raton : CRC Press, Taylor & Francis Group, 2017.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315120621-19.
Pełny tekst źródłaPlatikanov, D., V. N. Izmailova i G. P. Yampolskaya. "Physico-Chemical Background of the Foaming Protein Separation for Waste Minimization". W Role of Interfaces in Environmental Protection, 507–20. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-010-0183-0_31.
Pełny tekst źródłaDi Maio, Ernesto, Salvatore Iannace i Giuseppe Mensitieri. "Gas foaming with physical blowing agents". W Supercritical Fluid Science and Technology, 33–54. Elsevier, 2021. http://dx.doi.org/10.1016/b978-0-444-63724-6.00002-0.
Pełny tekst źródłaWypych, George. "EFFECT OF FOAMING ON PHYSICAL-MECHANICAL PROPERTIES OF FOAMS". W Handbook of Foaming and Blowing Agents, 195–217. Elsevier, 2017. http://dx.doi.org/10.1016/b978-1-895198-99-7.50014-3.
Pełny tekst źródłaWypych, George. "EFFECT OF FOAMING ON PHYSICAL-MECHANICAL PROPERTIES OF FOAMS". W Handbook of Foaming and Blowing Agents, 231–60. Elsevier, 2022. http://dx.doi.org/10.1016/b978-1-77467-000-2.50015-7.
Pełny tekst źródłaJerpdal, L., J. Hain i O. Täger. "Lightweight design for increased payload: new ways using polymer composites and physical foaming". W Kunststoffe im Automobilbau 2017, 273–74. VDI Verlag, 2017. http://dx.doi.org/10.51202/9783182443476-273.
Pełny tekst źródłaJerpdal, L., J. Hain i O. Täger. "Lightweight design for increased payload: new ways using polymer composites and physical foaming". W Plastics in Automotive Engineering 2017, 259–60. VDI Verlag, 2017. http://dx.doi.org/10.51202/9783182443483-259.
Pełny tekst źródłaStreszczenia konferencji na temat "Physical foaming"
Petrossian, Gayaneh, i Amir Ameli. "Preparation of Highly Loaded Piezo-Composite Foams With High Expansion and Low Permittivity". W ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3807.
Pełny tekst źródłaHopmann, Ch, C. Windeck, S. Hendriks, S. Zepnik i T. Wodke. "Extrusion foaming of thermoplastic cellulose acetate from renewable resources using a two-component physical blowing agent system". W PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. American Institute of Physics, 2014. http://dx.doi.org/10.1063/1.4873746.
Pełny tekst źródłaGuarino, S., i V. Tagliaferri. "Fabrication of Aluminium Foam Components by Using Powder Compact Melting Method". W ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58607.
Pełny tekst źródłaVISCUSI, A. "Experimental analysis of cold sprayed precursors for closed-cells aluminum foams". W Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-6.
Pełny tekst źródłaRizvi, Hussain R., i Nandika D'Souza. "Design of a Multifunctional Porous Coaxial Electrospun Mesh Using Polycaprolactone (PCL) and Poly Butylene Adipate-CO-Terephthalate (PBAT)". W ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67534.
Pełny tekst źródłaTampubolon, Grecy Kristina, Mukti Hamjah Harahap i Winsyah Putra. "Review of the Physical Properties of CLC Lightweight Concrete Using the Addition of Red Sand from Labuhan Batu Selatan". W The 5th International Conference on Science and Technology Applications. Switzerland: Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-zd0pw0.
Pełny tekst źródłaMarcano, Luis, Xiomara Santana Gutierrez, Beatriz Perez i Edward Martinez. "Effect of Some Physical-Chemical Variables on the Formation and Stability of Foam in Oil-Gas Systems and Their Correlation With the Formation of Foaming Crude Oil". W Latin American and Caribbean Petroleum Engineering Conference. Society of Petroleum Engineers, 2009. http://dx.doi.org/10.2118/123060-ms.
Pełny tekst źródłaRao, Jiajia. "Tuning plant protein for improved functionality and flavor profile: From field to application". W 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/xqxj4886.
Pełny tekst źródłaZvada, Maiia Vladimirovna, Pavel Nikolaevich Belovus, Evgeny Ivanovich Sergeev, Nikolay Grigorevich Glavnov, Mikhail Alekseevich Varfolomeev i Emil Rinatovich Saifullin. "Study of the Efficiency of Gel and Polymer-Stabilized Foam Systems for Gas Shut-Off in Horizontal Wells". W SPE Russian Petroleum Technology Conference. SPE, 2021. http://dx.doi.org/10.2118/206404-ms.
Pełny tekst źródłaMohamad, Abdelrahman, Fouzia Khadraoui, Nassim Sebaibi, Mohamed Boutouil i Daniel Chateigner. "Water Sensitivity of Hemp-Foam Concrete". W 4th International Conference on Bio-Based Building Materials. Switzerland: Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.135.
Pełny tekst źródła