Rozprawy doktorskie na temat „Photovoltaic modelling”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Photovoltaic modelling”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Manshaei, Leila. "Modelling of Photovoltaic power plantsin SIMPOW". Thesis, KTH, Elektriska energisystem, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-121150.
Pełny tekst źródłaSchweizer, Christian. "Modelling photovoltaic systems in urban environments". Thesis, De Montfort University, 2000. http://hdl.handle.net/2086/4822.
Pełny tekst źródłaGow, John A. "Modelling, simulation and control of photovoltaic converter systems". Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/6871.
Pełny tekst źródłaWang, Yimin. "Modelling physical location based factors of photovoltaic viability". Thesis, University of Sheffield, 2014. http://etheses.whiterose.ac.uk/6367/.
Pełny tekst źródłaAdkins, Deborah Anne. "Experimental and numerical modelling of mid-concentration photovoltaic concentrator systems". Thesis, University of Nottingham, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.594866.
Pełny tekst źródłaCzekala, Piotr. "Modelling of molecules on surfaces and thin-film photovoltaic absorbers". Thesis, University of Liverpool, 2013. http://livrepository.liverpool.ac.uk/16755/.
Pełny tekst źródłaAseeri, Ahmed. "Modelling and simulation of fuel cell/photovoltaic hybrid power system". Thesis, Cranfield University, 2012. http://dspace.lib.cranfield.ac.uk/handle/1826/8280.
Pełny tekst źródłaBlack, Jonathan Paul. "Mathematical modelling of electronic contact mechanisms in silicon photovoltaic cells". Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:ff671215-5f05-4ef0-a876-3f474a8450c9.
Pełny tekst źródłaBisconti, Raffaella. "Optical modelling and optimisation of Spheral Solar'T'M Cells". Thesis, Northumbria University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245206.
Pełny tekst źródłaWu, Xiaofeng. "Fast spatially-resolved electrical modelling and quantitative characterisation of photovoltaic devices". Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/18018.
Pełny tekst źródłaSyres, Karen Louise. "Molecular adsorption on TiO2 surfaces : modelling potential biomedical and photovoltaic devices". Thesis, University of Manchester, 2010. https://www.research.manchester.ac.uk/portal/en/theses/molecular-adsorption-on-tio2-surfaces-modelling-potential-biomedical-and-photovoltaic-devices(14c1f1a6-7650-43e2-b8cc-9c9e102f6923).html.
Pełny tekst źródłaZarmai, Musa Tanko. "Modelling of solder interconnection's performance in photovoltaic modules for reliability prediction". Thesis, University of Wolverhampton, 2016. http://hdl.handle.net/2436/617782.
Pełny tekst źródłaSokolov, Michael. "Small-signal modelling of maximum power point tracking for photovoltaic systems". Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/39348.
Pełny tekst źródłaEbrahim, Mila. "Performance Evaluation of a Photovoltaic/Thermal (PVT) Collector with Numerical Modelling". Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302122.
Pełny tekst źródłaEn panel med kombinerad teknik av både solceller och termisk solfångare (PVT) kan producera både elektricitet och värme samtidigt. Forskning har visat att det kan finnas flera fördelar med att integrera PVT-paneler med ett bergvärmesystem, eftersom det mjliggör lagring av termisk energi över året. Dessutom leder ett sådant system till lägre drifttemperaturer som kan öka PVT-panelens effektivitet och livslängd. Syftet med studien är att presentera den elektriska och termiska prestandan av en PVT-panel utvecklat av Solhybrid i Småland AB för olika driftförhållanden som kan uppstå på grund av olika väderförhållanden och inlopps-temperaturer när panelerna är kopplade till ett bergvärmesystem. Vidare utvärderas prestandan för denna panel med ASHRAEmetoden (standard 93-2003), för att möjliggöra jämförelse med andra PVT-paneler. Modelleringsverktyget som använts i studien är mjukvaran COMSOL Multiphysics, som använder finita elementmetoden för att lösa partiella differentialekvationer i värmeöverförings-och flödesproblem. Baserat på prestandakurvorna som presenteras i resultatet, är den termiska och elektriska verkningsgraden approximativt 48.0-53.4% respektive 19.0-19.2% för en reducerad temperatur med värdet noll, en solstrålning mellan 800-1000 W/m2, för en massflödeshastighet på 0.026 kg/sm2 som beslutades som den mest lämpliga för att öka den termiska prestandan. Resultaten resulterade i en värmeavledningsfaktor (FR) och total värmeförlustkoefficient (UL) på 0.56-0.62 respektive 53.4-53.5 W/m2 K. Resultaten på PVT-panelens prestanda under olika väderförhållanden visar att vattnets inloppstemperatur kan påverka drifttiden och mängden termisk energi som kan extraheras under året avsevärt, speciellt i nordiskt klimat. För att bedöma korrektheten i resultaten och den skapade modellen rekommenderas experimentell testning av den studerade PVT-panelen.
Martin, C. M. "Modelling the Effect of the Interface Morphology in Organic-Inorganic Photovoltaic Devices". Thesis, University of Oxford, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.504434.
Pełny tekst źródłaBraun, Felix Maximilian. "Modelling of light-trapping structures and their application in organic photovoltaic devices". Thesis, University College London (University of London), 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.437362.
Pełny tekst źródłaBrivio, Federico. "Atomistic modelling of perovskite solar cells". Thesis, University of Bath, 2016. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.698992.
Pełny tekst źródłaLam, King-hang. "Techniques for dynamic modelling of BIPV in supporting system design and BEMS". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39558460.
Pełny tekst źródłaQuintana, Samer. "Building integrated photovoltaic (BIPV) modelling for a demo site in Ludvika based on building information modelling (BIM) platform". Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-29078.
Pełny tekst źródłaGabr, Ahmed. "Modelling and Characterization of Down-Conversion and Down-Shifting Processes for Photovoltaic Applications". Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35048.
Pełny tekst źródłaFialho, Luís André Pereira. "Photovoltaic generation with energy storage integrated into the electric grid: modelling, simulation and experimentation". Doctoral thesis, Universidade de Évora, 2019. http://hdl.handle.net/10174/25361.
Pełny tekst źródłaVanden, Eynde Nicholas. "Modelling of a stand alone photovoltaic system with dedicated hybrid battery energy storage system". Master's thesis, University of Cape Town, 2012. http://hdl.handle.net/11427/11932.
Pełny tekst źródłaIncludes bibliographical references.
The purpose of this thesis project was to model and simulate a stand-alone photovoltaic (PV) plant that utilized the maximum power point tracking (MPPT) technique and included a hybrid battery energy storage system (BESS). The model consisted of five main components namely; the photovoltaic module, maximum power point tracking technique, hybrid battery energy storage system, controller and load.
Young, Clinton. "Analysis and optimisation through mathematical modelling: Muresk farm photovoltaic reverse osmosis water treatment plant". Thesis, Young, Clinton (2020) Analysis and optimisation through mathematical modelling: Muresk farm photovoltaic reverse osmosis water treatment plant. Honours thesis, Murdoch University, 2020. https://researchrepository.murdoch.edu.au/id/eprint/57216/.
Pełny tekst źródłaChiodetti, Matthieu. "Bifacial PV plants: performance model development and optimization of their configuration". Thesis, KTH, Kraft- och värmeteknologi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172516.
Pełny tekst źródłaLam, King-hang, i 林勁恆. "Techniques for dynamic modelling of BIPV in supporting system design and BEMS". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39558460.
Pełny tekst źródłaHofmann, Martin [Verfasser]. "Analysis and improvement of irradiance modelling algorithms for the simulation of photovoltaic systems / Martin Hofmann". Hannover : Gottfried Wilhelm Leibniz Universität, 2019. http://d-nb.info/1196809119/34.
Pełny tekst źródłaLammert, Gustav [Verfasser]. "Modelling, Control and Stability Analysis of Photovoltaic Systems in Power System Dynamic Studies / Gustav Lammert". Kassel : Kassel University Press, 2019. http://d-nb.info/1196034125/34.
Pełny tekst źródłaBoreland, Matt School of Electrical Engineering UNSW. "Laser Crystallisation of Silicon for Photovoltaic Applications using Copper Vapour Lasers". Awarded by:University of New South Wales. School of Electrical Engineering, 1999. http://handle.unsw.edu.au/1959.4/17190.
Pełny tekst źródłaMarzooghi, Hesamoddin. "Modelling and Stability Assessment of Future Grid Scenarios". Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/15408.
Pełny tekst źródłaVika, Håvard Breisnes. "Modelling of Photovoltaic Modules with Battery Energy Storage in Simulink/Matlab : With in-situ measurement comparisons". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26128.
Pełny tekst źródłaZacharopoulos, Aggelos. "Optical design modelling and experimental characterisation of line-axis concentrators for solar photovoltaic and thermal applications". Thesis, University of Ulster, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342344.
Pełny tekst źródłaAdeleke, Adedayo Kelvin. "Web-based GIS modelling of building-integrated solar photovoltaic system for the City of Cape Town". Doctoral thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/29181.
Pełny tekst źródłaClemente, Andres. "Design and modelling of a photovoltaic driven fan solar air heater for drying woodchip in Scotland". Thesis, Edinburgh Napier University, 2011. http://researchrepository.napier.ac.uk/Output/4417.
Pełny tekst źródłaOJO, SAHEED OLALEKAN. "Thermo-visco-elastic modelling of photovoltaic laminates: Advanced shear-lag theory and model order reduction techniques". Doctoral thesis, Politecnico di Torino, 2016. http://hdl.handle.net/11583/2650003.
Pełny tekst źródłaMehranfar, Shayan. "Finite Element Modelling and On-Site Measurements for Roof Mounted Photovoltaic Solar Panels under High Wind Load". Thesis, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/31748.
Pełny tekst źródłaChong, Benjamin Vui Ping. "Modelling and controlling of integrated photovoltaic-module and converter systems for partial shading operation using artificial intelligence". Thesis, University of Leeds, 2010. http://etheses.whiterose.ac.uk/11321/.
Pełny tekst źródłaNoori, Keian. "Energy-level alignment at organic and hybrid organic-inorganic photovoltaic interfaces". Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:d1b2a4e9-a5d6-4843-b172-6d83dea8a6cb.
Pełny tekst źródłaYasin, Aysar Mahmoud Masoud. "Distributed Generation Systems Based on Hybrid Wind/Photovoltaic/Fuel Cell Structures". Doctoral thesis, Università di Catania, 2012. http://hdl.handle.net/10761/995.
Pełny tekst źródłaLodi, Chiara. "Modelling the energy dynamics of ventilated photovoltaic facades using stochastic differential equations in a monitored Test Reference Environment". Doctoral thesis, Universitat de Lleida, 2012. http://hdl.handle.net/10803/84167.
Pełny tekst źródłaEl objetivo general de este trabajo es contribuir a la evaluación de la transferencia de la energía en régimen dinámico de sistemas de doble piel FotoVoltaicos Integrados en Edificios (EIFV) con ventilación forzada bajo condiciones climáticas exteriores reales. Por lo tanto, uno de los objetivos de este trabajo de investigación consistió en recolectar datos experimentales bajo condiciones externas reales con el “Test Reference Environment” (TRE) en el Parque Científico y Tecnológico Agroalimentario de Lleida (PCiTAL). Se llevó a cabo una larga campaña de medidas donde se realizaron varios experimentos, con diferentes inclinaciones y regímenes de ventilación. Otro objetivo fue estimar parámetros físicos desconocidos mediante el uso de modelos de identificación. Para lograr este objetivo, varios modelos de caja gris estocásticos se desarrollaron. Por último, a partir de la experiencia adquirida durante el trabajo experimental, de análisis y de modelación, se ha propuesto la definición de un entorno de prueba “Test Reference Environment” estandarizado para las aplicaciones de EIFV de doble piel.
The general aim of this work is to contribute to the energy dynamics assessment of mechanically ventilated double skin Building Integrated PhotoVoltaic (BIPV) systems under real outdoor weather conditions. Therefore, one of the objectives of this research work has consisted in collecting experimental data under real outdoor conditions in the Test Reference Environment (TRE) at the Lleida Agri-food Science and Technology Park (PCiTal). An extensive monitoring campaign has been carried out and several experiments, at different inclinations and ventilation regimes, have been performed. Another goal was to estimate unknown physical parameters by using identification models. To achieve this goal, several stochastic grey-box models have been developed. Finally, from the experience gained during the experimental, analysis and modelling work, the definition of a standardized set-up for a Test Reference Environment for double skin applications of BIPV has been proposed.
Ramadan, Khaled Mohamed. "Modelling and Experimental Characterization of Photovoltaic/Thermal Systems for Cooling and Heating of Buildings in different climate conditions". Doctoral thesis, Universitat Rovira i Virgili, 2021. http://hdl.handle.net/10803/670914.
Pełny tekst źródłaThe integration of photovoltaic/thermal (PV/T) and efficient air conditioning systems into buildings allows the provision of heating, cooling and electricity with a reduction in greenhouse emissions. The integration configurations of: a) photovoltaic (PV) systems with air-cooled electric chillers and air-to-water heat pump (HP) systems; b) air-based PV/T systems with air-to-water HP systems; c) Low concentrated photovoltaic/thermal systems (LCPV/T) with compression and absorption chillers; and d) LCPV/T coupled with water-to-water HP have a great potential in boosting the share of onsite PV-electricity. The flexibility of incorporating LCPV/T energy for the bidirectional low temperature network in urban districts reduces thermal losses and provides producer and consumer (prosumer) buildings. In comparison to the typical configuration of PV integrated compression chiller, the proposed configuration of LCPV/T coupled with the compression and absorption chillers reduces the payback period by 10-40% in the case building in Cairo. Substituting the connection to the campus water network with the use of reversible
Sahli, Mehdi. "Simulation and modelling of thermal and mechanical behaviour of silicon photovoltaic panels under nominal and real-time conditions". Thesis, Strasbourg, 2019. http://www.theses.fr/2019STRAD036.
Pełny tekst źródłaThe work presented in this thesis deals with the development of a numerical multi-physics model, designed to study the optical, electrical and thermal behaviour of a photovoltaic module. The optical behaviour was evaluated using stochastic modelling based on Markov chains, whereas the electrical behaviour was drawn specifically for Silicon based photovoltaic panels using numerical optimization methods. The thermal behaviour was developed in 1D over the thickness of the module, and the multi-physics module was weakly coupled in MATLAB. The behaviour of commercial panels under nominal operation conditions was validated using data declared by the manufacturers. This model was used to perform a parametric study on the effect of solar irradiances in steady state. It was also validated for real use conditions by comparing it to experimental temperature and electrical power output. A thermomechanical study in 2D in ABAQUS/CAE based in the multi-physics model was carried out in nominal operating conditions, as well as in fatigue thermal cycling according to the IEC 61215 Standard to predict the stresses that are imposed on the panel
Malm, Ulf. "Modelling and Degradation Characteristics of Thin-film CIGS Solar Cells". Doctoral thesis, Uppsala University, Solid State Electronics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9291.
Pełny tekst źródłaThin-film solar cells based around the absorber material CuIn1-xGaxSe2 (CIGS) are studied with respect to their stability characteristics, and different ways of modelling device operation are investigated. Two ways of modelling spatial inhomogeneities are detailed, one fully numerical and one hybrid model. In the numerical model, thin-film solar cells with randomized parameter variations are simulated showing how the voltage decreases with increasing material inhomogeneities.
With the hybrid model, an analytical model for the p-n junction action is used as a boundary condition to a numerical model of the steady state electrical conduction in the front contact layers. This also allows for input of inhomogeneous material parameters, but on a macroscopic scale. The simpler approach, compared to the numerical model, enables simulations of complete cells. Effects of material inhomogeneities, shunt defects and grid geometry are simulated.
The stability of CIGS solar cells with varying absorber thickness, varying buffer layer material and CIGS from two different deposition systems are subjected to damp heat treatment. During this accelerated ageing test the cells are monitored using characterization methods including J-V, QE, C-V and J(V)T. The degradation studies show that the typical VOC decrease experienced by CIGS cells subjected to damp heat is most likely an effect in the bulk of the absorber material.
When cells encapsulated with EVA are subjected to the same damp heat treatment, the effect on the voltage is considerably reduced. In this situation the EVA is saturated with moisture, representing a worst case scenario for a module in operation. Consequently, real-life modules will not suffer extensively from the VOC degradation effect, common in unprotected CIGS devices.
Odeh, Ibrahim Khalil. "Modelling, field data analysis and economics of photovoltaic water pumps and the prospects for integrating desalination using reverse osmosis". Thesis, University of Ulster, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.419108.
Pełny tekst źródłaMesbahi, Abdessamad. "Deterministic and Stochastic Economic Modeling of Hybrid Power Supply System with Photovoltaic Generators". Master's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/42555.
Pełny tekst źródłaSchön, Gustav. "NUMERICAL MODELLING OF A NOVEL PVT COLLECTOR AT CELL RESOLUTION". Thesis, KTH, Energiteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-212731.
Pełny tekst źródłaEn kombinerad solcellspanel och solvärmefångare (PVT) producerar värme och elenergi på samma yta genom att en värmeväxlare upptar värmen från baksidan av solcellspanelen. Den PVT som berörs i denna studien är nyutvecklad och har aldrig tidigare testats, vilket medför att data för hur den beter sig samt dess termo-elektiska prestanda saknas för olika driftförhållanden samt flödeskonfigurationer. Vidare ger mediet som flödar genom värmeväxlaren upphov till en temperaturgradient, vilken kan innebära en påtaglig skillnad i temperatur mellan solcellerna i solcellspanelen vid mediets in- respektive utlopp. Trots solcellers temperaturkänslighet, så sker simulering i allmänhet med avseende på panelens medeltemperatur istället för att hänsyn tas till denna temperaturgradient. I den här studien implementeras en så kallad ”single diode”-modell i en kommersiell numerisk mjukvara termiska beräkningar för att samsimulera termiskt och elektriskt effektuttag ur den nyutvecklade PVT-designen. Designen modelleras statiskt under givna variationer av vindhastighet, inloppstemperatur, omgivande temperatur, flödeshastighet, solinstrålning och konvektionskoefficienter för mediet samt baksidan av modulen. Resultaten visar att kontrollerbara variabler som inloppstemperatur har högst inverkan på den totala effekten samt att en parallell flödeskonfiguration lämpar sig bäst. Studien visar också att skillnaden mellan simulering på cellnivå och modulnivå inte motiverar en numerisk beräkningsmetod med upplösning satt till solcellsnivå.
Mockus, Modestas. "Autonominės saulės energijos sistemos modeliavimas". Master's thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20120202_135157-77748.
Pełny tekst źródłaDecentralization of today‘s energy system is inevitability related to conversion to sustainable power system. Solar energy has the most potential to partially replace finite energy sources used today. A research on solar power systems and main components of the autonomous system was made in this paper. Autonomous photovoltaic system modelling was conducted. System size was chosen with reference to middle class user electric power consumption habbits in Lithuania. Consumption optimization and system load optimization were done and effects on consuption rate, excess electricity output and operating mode of batteries were observed and analysed. Optimized system‘s operation during the lowest and highest solar radiation conditions in Lithuania were evaluated.
Trapani, Kim. "FLEXIBLE FLOATING THIN FILM PHOTOVOLTAIC (PV) ARRAY CONCEPT FOR MARINE AND LACUSTRINE ENVIRONMENTS". Thesis, Laurentian University of Sudbury, 2014. https://zone.biblio.laurentian.ca/dspace/handle/10219/2199.
Pełny tekst źródłaTatsiankou, Viktar. "Instrumentation Development for Site-Specific Prediction of Spectral Effects on Concentrated Photovoltaic System Performance". Thesis, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/31222.
Pełny tekst źródłaSultani, Jasim Farhood. "Modelling, design and implementation of D-Q control in single-phase grid-connected inverters for photovoltaic systems used in domestic dwellings". Thesis, De Montfort University, 2013. http://hdl.handle.net/2086/9631.
Pełny tekst źródłaKozlowski, Fryderyk. "Numerical simulation and optimisation of organic light emitting diodes and photovoltaic cells". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2005. http://nbn-resolving.de/urn:nbn:de:swb:14-1134592504212-65990.
Pełny tekst źródła