Artykuły w czasopismach na temat „Out-Of-Autoclave Consolidation”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 24 najlepszych artykułów w czasopismach naukowych na temat „Out-Of-Autoclave Consolidation”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Centea, T., i P. Hubert. "Out-of-autoclave prepreg consolidation under deficient pressure conditions". Journal of Composite Materials 48, nr 16 (8.07.2013): 2033–45. http://dx.doi.org/10.1177/0021998313494101.
Pełny tekst źródłaShaik, Yousuf Pasha, Jens Schuster i Naresh Kumar Naidu. "High-Pressure FDM 3D Printing in Nitrogen [Inert Gas] and Improved Mechanical Performance of Printed Components". Journal of Composites Science 7, nr 4 (10.04.2023): 153. http://dx.doi.org/10.3390/jcs7040153.
Pełny tekst źródłaShaik, Yousuf Pasha, Jens Schuster, Harshavardhan Reddy Katherapalli i Aarif Shaik. "3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts". Journal of Composites Science 6, nr 1 (5.01.2022): 16. http://dx.doi.org/10.3390/jcs6010016.
Pełny tekst źródłaSaenz-Castillo, Diego, María I. Martín, Vanessa García-Martínez, Abhiram Ramesh, Mark Battley i Alfredo Güemes. "A comparison of mechanical properties and X-ray tomography analysis of different out-of-autoclave manufactured thermoplastic composites". Journal of Reinforced Plastics and Composites 39, nr 19-20 (7.05.2020): 703–20. http://dx.doi.org/10.1177/0731684420924081.
Pełny tekst źródłaHelmus, Rhena, Timotei Centea, Pascal Hubert i Roland Hinterhölzl. "Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling". Journal of Composite Materials 50, nr 10 (24.06.2015): 1403–13. http://dx.doi.org/10.1177/0021998315592005.
Pełny tekst źródłaDrakonakis, Vasileios M., James C. Seferis i Charalambos C. Doumanidis. "Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation". Advances in Materials Science and Engineering 2013 (2013): 1–14. http://dx.doi.org/10.1155/2013/356824.
Pełny tekst źródłaMahmood, Amjed Saleh, John Summerscales i Malcolm Neil James. "Resin-Rich Volumes (RRV) and the Performance of Fibre-Reinforced Composites: A Review". Journal of Composites Science 6, nr 2 (10.02.2022): 53. http://dx.doi.org/10.3390/jcs6020053.
Pełny tekst źródłaShaik, Yousuf Pasha, Jens Schuster, Aarif Shaik, Mustafa Mohammed i Harshavardhan Reddy Katherapalli. "Effect of Autoclave Pressure and Temperature on Consolidation of Layers and Mechanical Properties of Additively Manufactured (FDM) Products with PLA". Journal of Manufacturing and Materials Processing 5, nr 4 (27.10.2021): 114. http://dx.doi.org/10.3390/jmmp5040114.
Pełny tekst źródłaHelmus, R., R. Hinterhölzl i P. Hubert. "A stochastic approach to model material variation determining tow impregnation in out-of-autoclave prepreg consolidation". Composites Part A: Applied Science and Manufacturing 77 (październik 2015): 293–300. http://dx.doi.org/10.1016/j.compositesa.2015.03.021.
Pełny tekst źródłaRizzolo, Robert, Daniel Walczyk, Jaron Kuppers, Daniel Montoney i Richard Galloway. "Rapid consolidation and curing of advanced composites using electron beam irradiation". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, nr 4 (28.04.2018): 1168–81. http://dx.doi.org/10.1177/0954405418769950.
Pełny tekst źródłaHeil, Joseph P., Mark A. Wadsworth, Kerrick R. Dando, Ron E. Jones, Matt Tymes, Sam J. Slater, Rodney E. Bahr i Bryan T. Bearden. "Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study". SAMPE JOURNAL 59, nr 6 (listopad 2023): 9–18. http://dx.doi.org/10.33599/sj.v59no6.01.
Pełny tekst źródłaVarkonyi, Balazs, Jonathan P. H. Belnoue, James Kratz i Stephen R. Hallett. "Predicting consolidation-induced wrinkles and their effects on composites structural performance". International Journal of Material Forming 13, nr 6 (16.11.2019): 907–21. http://dx.doi.org/10.1007/s12289-019-01514-2.
Pełny tekst źródłaLink, Tobias, Philipp Rosenberg i Frank Henning. "Prediction of Gaps in Automated Tape Laying and Their Influence on Porosity in Consolidated Laminates". Journal of Composites Science 6, nr 7 (15.07.2022): 207. http://dx.doi.org/10.3390/jcs6070207.
Pełny tekst źródłaHoskins, David, i Genevieve Palardy. "High-speed consolidation and repair of carbon fiber/epoxy laminates through ultrasonic vibrations: A feasibility study". Journal of Composite Materials 54, nr 20 (28.01.2020): 2707–21. http://dx.doi.org/10.1177/0021998320903097.
Pełny tekst źródłaProietti, Alice, Leandro Iorio, Nicola Gallo, Marco Regi, Denise Bellisario, Fabrizio Quadrini i Loredana Santo. "Recycling of Carbon Fiber Laminates by Thermo-mechanical Disassembly and Hybrid Panel Compression Molding". Materiale Plastice 59, nr 1 (5.04.2022): 44–50. http://dx.doi.org/10.37358/mp.22.1.5558.
Pełny tekst źródłaYassin, Khaled, i Mehdi Hojjati. "Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods". Journal of Thermoplastic Composite Materials 31, nr 12 (26.11.2017): 1676–725. http://dx.doi.org/10.1177/0892705717738305.
Pełny tekst źródłaZucco, G., V. Oliveri, M. Rouhi, R. Telford, G. Clancy, C. McHale, R. O’Higgins, T. M. Young, P. M. Weaver i D. Peeters. "Static test of a variable stiffness thermoplastic composite wingbox under shear, bending and torsion". Aeronautical Journal 124, nr 1275 (22.01.2020): 635–66. http://dx.doi.org/10.1017/aer.2019.161.
Pełny tekst źródłaVidrih, Tadej, Peter Winiger, Zafiris Triantafyllidis, Valentin Ott i Giovanni P. Terrasi. "Investigations on the Fatigue Behaviour of 3D-Printed Continuous Carbon Fibre-Reinforced Polymer Tension Straps". Polymers 14, nr 20 (11.10.2022): 4258. http://dx.doi.org/10.3390/polym14204258.
Pełny tekst źródłaMaes, Vincent K., Arjun Radhakrishnan, Jamie Hartley, Stuart Sykes i James Kratz. "Tracking consolidation of out-of-autoclave prepreg corners using pressure sensors". Composites Part A: Applied Science and Manufacturing, sierpień 2022, 107172. http://dx.doi.org/10.1016/j.compositesa.2022.107172.
Pełny tekst źródłaIorio, Leandro, Fabrizio Quadrini, Nicola Gallo i Loredana Santo. "Out-of-autoclave molding of carbon fiber laminates by consolidation with shape memory polymer foams". Journal of Composite Materials, 19.09.2023. http://dx.doi.org/10.1177/00219983231204117.
Pełny tekst źródłaSaffar, Florence, Camille Sonnenfeld, Pierre Beauchêne i Chung Hae Park. "In-situ Monitoring of the Out-Of-Autoclave Consolidation of Carbon/Poly-Ether-Ketone-Ketone Prepreg Laminate". Frontiers in Materials 7 (25.06.2020). http://dx.doi.org/10.3389/fmats.2020.00195.
Pełny tekst źródłaIorio, Leandro, Denise Bellisario, Nicola Gallo, Claudia Papa, Marco Regi, Daniele Santoro, Fabrizio Quadrini i Loredana Santo. "Anisogrid lattice cylinders made of thermoplastic composite under buckling loading". ESAFORM 2021, 10.04.2021. http://dx.doi.org/10.25518/esaform21.2798.
Pełny tekst źródłaRizzolo, Robert, Daniel F. Walczyk i Daniel Montoney. "The Effect of Electron Beam Irradiation on Elastomers Used in Tooling for Composites Manufacturing". Journal of Manufacturing Science and Engineering, 2.01.2021, 1–8. http://dx.doi.org/10.1115/1.4049493.
Pełny tekst źródłaBecerra, Luis Humberto Campos, Marco Antonio Loudovic Hernández Rodríguez, Raúl Lesso Arroyo, Hugo Esquivel Solís i Alejandro Torres Castro. "Effect of sterilization on 3-point dynamic response to in vitro bending of an Mg implant". Biomaterials Research 25, nr 1 (6.04.2021). http://dx.doi.org/10.1186/s40824-021-00207-9.
Pełny tekst źródła