Gotowe bibliografie tematyczne / Optical fibers

Gotowa bibliografia na temat „Optical fibers”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 30 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Optical fibers”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Optical fibers"

1

Jóźwicki, Mateusz Łukasz, Mateusz Gargol, Małgorzata Gil-Kowalczyk i Paweł Mergo. "Commercially available granulates PMMA and PS - potential problems with the production of polymer optical fibers". Photonics Letters of Poland 12, nr 3 (30.09.2020): 79. http://dx.doi.org/10.4302/plp.v12i3.1036.

Pełny tekst źródła
Streszczenie:
The aim of the study was to verify the usefulness of commercially available granulates of PMMA (poly (methyl methacrylate) and PS (polystyrene) for the production of polymer optical fibers by extrusion method. Samples were subjected to thermal processing in various conditions (different temperatures and exposure time). Thermal (TG/DTG) and spectroscopic (ATR/FT-IR) analyses were carried out to analyze changes in the samples. Based on FT-IR analysis of liquid monomers and granulates the conversion of double bonds was calculated, which gave us a picture of the degree of monomers conversion, crucial information from the technological point of view. Full Text: PDF ReferencesO. Ziemann, J. Krauser, P.E. Zamzow, W. Daum, POF Polymer Optical Fibersfor Data Communication (Berlin: Springer 2008). DirectLink P. Stajanca et al. "Solution-mediated cladding doping of commercial polymer optical fibers", Opt. Fiber Technol. 41, 227-234, (2018). CrossRef K. Peters, "Polymer optical fiber sensors—a review", Smart Mater. Struct., 20 013002 (2011) CrossRef J. Zubia and J. Arrue, "Plastic Optical Fibers: An Introduction to Their Technological Processes and Applications", Opt. Fiber Technol. 7 ,101-40 (2001) CrossRef M. Beckers, T. Schlüter, T. Gries, G. Seide, C.-A. Bunge, "6 - Fabrication techniques for polymer optical fibres", Polymer Optical Fibres, 187-199 (2017) CrossRef M. Niedźwiedź , M. Gil, M. Gargol , W. Podkościelny, P. Mergo, "Determination of the optimal extrusion temperature of the PMMA optical fibers", Phot. Lett. Poland 11, 7-9 (2019) CrossRef
Style APA, Harvard, Vancouver, ISO itp.
2

Krivenko, Yu E., i E. I. Andreeva. "Traffic interception in fiber optical video-systems". Journal of Physics: Conference Series 2086, nr 1 (1.12.2021): 012150. http://dx.doi.org/10.1088/1742-6596/2086/1/012150.

Pełny tekst źródła
Streszczenie:
Abstract In fiber-optic video systems, as well as in optical communication systems, standard single mode optical fibers (SSMF, standard G.652) are usually used. One of the advantages of these fibers is the ability to use CWDM in a wide spectrum. At the same time, more optimal near the wave-length of 1550 nm are provided by non-zero dispersion fiber (NZDSF, standard G.655) fibers. However, as studies have shown, these optical fibers have an increased sensitivity to bending. This fact can be used to traffic interception. It is shown that fiber-optics systems with SSMF have more protection from traffic interception than systems with NZDSF. To transmit a high-confidentiality video signal, special techniques, such as frequency modulation, can be used, or additional noise signals can be added.
Style APA, Harvard, Vancouver, ISO itp.
3

Tandon, Pushkar, Ming-Jun Li, Dana C. Bookbinder, Stephan L. Logunov i Edward J. Fewkes. "Nano-engineered optical fibers and applications". Nanophotonics 2, nr 5-6 (16.12.2013): 383–92. http://dx.doi.org/10.1515/nanoph-2013-0032.

Pełny tekst źródła
Streszczenie:
AbstractThe paper reviews optical fibers with nano-engineered features and methods to fabricate them. These optical fibers have nano-engineered regions comprising of randomly distributed voids which provide unique properties for designing next generation of fibers. Discussion of impact of void morphology on fiber optical properties is presented, along with the methods to control the void characteristics. Use of nano-engineered fibers for different applications (ultra-low bend loss single mode fiber, quasi-single mode bend loss fiber, endless single-mode fiber, light diffusing fibers) is discussed and the unique optical attributes of the fibers in these applications is highlighted.
Style APA, Harvard, Vancouver, ISO itp.
4

Cozic, Solenn, Simon Boivinet, Christophe Pierre, Johan Boulet, Samuel Poulain i Marcel Poulain. "Splicing fluoride glass and silica optical fibers". EPJ Web of Conferences 215 (2019): 04003. http://dx.doi.org/10.1051/epjconf/201921504003.

Pełny tekst źródła
Streszczenie:
Splicing fluoride glass fibers and silica fibers is a critical point for manufacturing all fibered laser modules. As these materials are extremely different, various problems must be considered: thermal, expansion, mechanical, chemical. Reliability and power handling make priority concerns. We report splices made on a 200/220 multimode silica fiber and a double clad 15/250/290 ZBLAN fiber. Splices are proof tested at 300 g tensile strength. No damage is observed after thermal cycling from -30 °C to 85 °C, at 40 % RH during 24 hours. Typical optical splice loss is about 0.2 dB. They withstand 220 W input power at 976 nm without any damage and drastic temperature increasing.
Style APA, Harvard, Vancouver, ISO itp.
5

Boyd, Robert W., i Eric L. Buckland. "Nonlinear Optical Interactions in Optical Fibers". Journal of Nonlinear Optical Physics & Materials 07, nr 01 (marzec 1998): 105–12. http://dx.doi.org/10.1142/s0218863598000089.

Pełny tekst źródła
Streszczenie:
We report on our research program aimed at clarifying the physical processes leading to the nonlinear optical response of silica optical fibers and at studying the implications of optical nonlinearities on optical pulse propagation and optical switching devices. The dominant physical processes leading to the nonlinear optical response of an optical fiber are nonresonant electronic polarization, with essentially instantaneous response, the Raman interaction, with sub-picosecond response, and electrostriction, with nanosecond response. We present experimental results that show the consequence of each of these processes on the propagation of a light pulse through an optical fiber. We have also performed one of the first direct measurements of the electrostrictive contribution to the nonlinear refractive index of optical fibers. We measure values ranging from 1.5 × 10-16 to 5.8 × 10-16 cm2/W , depending on fiber type. These values are comparable to that of the fast, Kerr nonlinearity (i.e., sum of electronic and Raman contributions) of 2.5 × 10-16 cm2/W . The measured electrostrictive nonlinearities are significantly larger than those predicted by simple models, and the possible explanations of this difference are discussed.
Style APA, Harvard, Vancouver, ISO itp.
6

Romaniuk, Ryszard S., i Waldemar Wójcik. "Optical Fiber Technology 2012". International Journal of Electronics and Telecommunications 59, nr 2 (1.06.2013): 131–40. http://dx.doi.org/10.2478/eletel-2013-0016.

Pełny tekst źródła
Streszczenie:
Abstract The Conference on Optical Fibers and Their Applications, Nałȩczów 2012, in its 14th edition, which has been organized since more than 35 years, has summarized the achievements of the local optical fiber technology community, for the last year and a half. The conference specializes in developments of optical fiber technology, glass and polymer, classical and microstructured, passive and active. The event gathered around 100 participants. There were shown 60 presentations of 20 research and application groups active in fiber photonics, originating from academia and industry. Topical tracks of the Conference were: photonic materials, planar waveguides, passive and active optical fibers, propagation theory in nonstandard optical fibers, and new constructions of optical fibers. A panel discussion concerned teaching in fiber photonics. The conference was accompanied by a school on Optical Fiber Technology. The paper summarizes the chosen main topical tracks of the conference on Optical Fibers and Their Applications, Nałȩczów 2012. The papers from the conference presentations will be published in Proc. SPIE, including a conference version of this paper. The next conference of this series is scheduled for January 2014 in Białowie˙za.
Style APA, Harvard, Vancouver, ISO itp.
7

Barczak, K. "Magnetooptic effect of photonic crystal fiber in blue region of visible spectrum". Bulletin of the Polish Academy of Sciences Technical Sciences 62, nr 4 (1.12.2014): 683–89. http://dx.doi.org/10.2478/bpasts-2014-0074.

Pełny tekst źródła
Streszczenie:
Abstract The phenomenon of optical birefringence in optical fibers is caused by external factors and stress induced by the manufacturing process. This optical birefringence makes it difficult to apply optical fibers as a polarimetric sensors head. Author of this paper, proposes the application of index guiding photonic crystal fibers because stress values in a fiber core caused by internal and external factors are lower. In this paper investigation results extended in comparison with the previous author’s investigations are presented. This extension relies on investigation of magnetooptic for wavelength 405 nm. On the basis of experimental results optimal work points of optical sensing fibers were determined.
Style APA, Harvard, Vancouver, ISO itp.
8

Pickrell, Gary R., Evgenya S. Smirnova, Stanton L. De Haven i Robert S. Rogowski. "Hybrid Ordered Hole-Random Hole Optical Fibers". Advances in Science and Technology 45 (październik 2006): 2598–607. http://dx.doi.org/10.4028/www.scientific.net/ast.45.2598.

Pełny tekst źródła
Streszczenie:
Photonic band gap (PBG) fibers have generated significant interest over the last decade due to the unique set of properties these fibers exhibit. In general, these fibers have been made by drawing a series of glass tubes (which are stacked in an ordered array) into a fiber. These fibers consist of an ordered arrangement of holes or tubes in a glass matrix. In this invited paper we describe a novel type of fiber, called HORHOFs (hybrid ordered random hole optical fibers). In these fibers, the refractive index of the ordered-hole region is controlled by incorporation of very small tubes of glass produced in-situ during the fiber drawing process. The result is a region of controllable glass density inside the “ordered hole”. This allows tailoring of the refractive index of the hole region and of the matrix glass around the holes. Description of the process to produce these new types of fibers, micrographs of some of the fibers produced, some potential applications, and the results of some computer modeling to predict the properties of these fibers, are presented.
Style APA, Harvard, Vancouver, ISO itp.
9

Sumetsky, M. "Nanophotonics of optical fibers". Nanophotonics 2, nr 5-6 (16.12.2013): 393–406. http://dx.doi.org/10.1515/nanoph-2013-0041.

Pełny tekst źródła
Streszczenie:
AbstractThis review is concerned with nanoscale effects in highly transparent dielectric photonic structures fabricated from optical fibers. In contrast to those in plasmonics, these structures do not contain metal particles, wires, or films with nanoscale dimensions. Nevertheless, a nanoscale perturbation of the fiber radius can significantly alter their performance. This paper consists of three parts. The first part considers propagation of light in thin optical fibers (microfibers) having the radius of the order of 100 nanometers to 1 micron. The fundamental mode propagating along a microfiber has an evanescent field which may be strongly expanded into the external area. Then, the cross-sectional dimensions of the mode and transmission losses are very sensitive to small variations of the microfiber radius. Under certain conditions, a change of just a few nanometers in the microfiber radius can significantly affect its transmission characteristics and, in particular, lead to the transition from the waveguiding to non-waveguiding regime. The second part of the review considers slow propagation of whispering gallery modes in fibers having the radius of the order of 10–100 microns. The propagation of these modes along the fiber axis is so slow that they can be governed by extremely small nanoscale changes of the optical fiber radius. This phenomenon is exploited in SNAP (surface nanoscale axial photonics), a new platform for fabrication of miniature super-low-loss photonic integrated circuits with unprecedented sub-angstrom precision. The SNAP theory and applications are overviewed. The third part of this review describes methods of characterization of the radius variation of microfibers and regular optical fibers with sub-nanometer precision.
Style APA, Harvard, Vancouver, ISO itp.
10

Carmo, J. P., i J. E. Ribeiro. "Optical Fibers on Medical Instrumentation". International Journal of Biomedical and Clinical Engineering 2, nr 2 (lipiec 2013): 23–36. http://dx.doi.org/10.4018/ijbce.2013070103.

Pełny tekst źródła
Streszczenie:
This paper provides a revision with the state-of-the-art related to the use of optical fiber sensors on medical instrumentation. Two types of optical fiber sensors are the focus of review: conventional optical fibers for communications and fiber Bragg gratings (FBGs).
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Optical fibers"

1

Washburn, Brian Richard. "Dispersion and nonlinearities associated with supercontinuum generation in microstructure fibers". Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/30964.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Richmond, Eric William. "Birefringent single-arm fiber optic enthalpimeter for catalytic reaction monitoring". Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-07282008-135248/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kuhlmey, Boris T. "Theoretical and numerical investigation of the physics of microstructured optical fibres". Connect to full text, 2004. http://setis.library.usyd.edu.au/adt/public_html/adt-NU/public/adt-NU20040715.171105.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--School of Physics, Faculty of Science, University of Sydney, 2004. (In conjunction with: Université de Droit, d'Économie et des Sciences d'Aix-Marseille (Aix Marseille III)).
Bibliography: leaves 196-204.
Style APA, Harvard, Vancouver, ISO itp.
4

Kominsky, Daniel. "Development of Random Hole Optical Fiber and Crucible Technique Optical Fibers". Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/28949.

Pełny tekst źródła
Streszczenie:
This dissertation reports the development of two new categories of optical fibers. These are the Random Hole Optical Fiber (RHOF) and the Crucible Technique Hybrid Fiber (CTF). The RHOF is a new class of microstructure fiber which possesses air holes which vary in diameter and location along the length of the fiber. Unlike all prior microstructure fibers, these RHOF do not have continuous air holes which extend throughout the fiber. The CTF is a method for incorporating glasses with vastly differing thermal properties into a single optical fiber. Each of these two classes of fiber brings a new set of optical characteristics into being. The RHOF exhibit many of the same guidance properties as the previously researched microstructure fibers, such as reduced mode counts in a large area core. CTF fibers show great promise for integrating core materials with extremely high levels of nonlinearity or gain. The initial goal of this work was to combine the two techniques to form a fiber with exceedingly high efficiency of nonlinear interactions. Numerous methods have been endeavored in the attempt to achieve the fabrication of the RHOF. Some of the methods include the use of sol-gel glass, microbubbles, various silica powders, and silica powders with the incorporation of gas producing agents. Through careful balancing of the competing forces of surface tension and internal pressure it has been possible to produce an optical fiber which guides light successfully. The optical loss of these fibers depends strongly on the geometrical arrangement of the air holes. Fibers with a higher number of smaller holes possess a markedly lower attenuation. RHOF also possess, to at least some degree the reduced mode number which has been extensively reported in the past for ordered hole fibers. Remarkably, the RHOF are also inherently pressure sensitive. When force is applied to an RHOF either isotropically, or on an axis perpendicular to the length of the fiber, a wavelength dependent loss is observed. This loss does not come with a corresponding response to temperature, rendering the RHOF highly anomalous in the area of fiber optic sensing techniques. Furthermore an ordered hole fiber was also tested to determine that this was not merely a hitherto undisclosed property of all microstructure fibers. Crucible technique fibers have also been fabricated by constructing an extremely thick walled silica tube, which is sealed at the bottom. A piece of the glass that is desired for the core (such as Lead Indium Phosphate) is inserted into the hole which is in the center of the tube. The preform is then drawn on an fiber draw tower, resulting in a fiber with a core consisting of a material which has a coefficient of thermal expansion (CTE) or a melting temperature (Tm) which is not commonly compatible with those of silica.
Ph. D.
Style APA, Harvard, Vancouver, ISO itp.
5

Polley, Arup. "High performance multimode fiber systems a comprehensive approach /". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/31699.

Pełny tekst źródła
Streszczenie:
Thesis (Ph.D)--Electrical and Computer Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Ralph, Stephen; Committee Member: Barry, John; Committee Member: Chang, G. K.; Committee Member: Cressler, John D.; Committee Member: Trebino. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Style APA, Harvard, Vancouver, ISO itp.
6

Hao, Miin-Jong. "Performance evaluation of practival FSK, CPFSK, and ASK detection schemes for coherent optical fiber communication systems". Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/15686.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Paye, Corey. "An Analysis of W-fibers and W-type Fiber Polarizers". Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/32474.

Pełny tekst źródła
Streszczenie:
Optical fibers provide the means for transmitting large amounts of data from one place to another and are used in high precision sensors. It is important to have a good understanding of the fundamental properties of these devices to continue to improve their applications. A specially type of optical fiber known as a W-fiber has some desirable properties and unique characteristics not found in matched-cladding fibers. A properly designed W- fiber supports a fundamental mode with a finite cutoff wavelength. At discrete wavelengths longer than cutoff, the fundamental mode experiences large amounts of loss. The mechanism for loss can be described in terms of interaction between the fiberâ ¢s supermodes and the lossy interface at the fiberâ ¢s surface. Experiments and computer simulations support this model of W-fibers. The property of a finite cutoff wavelength can be used to develop various fiber devices. Under consideration here is the fiber polarizer. The fiber polarizer produces an output that is linearly polarized along one of the fiberâ ¢s principal axes. Some of the polarizer properties can be understood from the study of W-fibers.
Master of Science
Style APA, Harvard, Vancouver, ISO itp.
8

MURA, EMANUELE. "PHOPSHATE OPTICAL FIBERS FOR IR FIBER LASERS". Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2544536.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Robinson, Risa J. "Polarization modulation and splicing techniques for stressed birefringent fiber /". Online version of thesis, 1995. http://hdl.handle.net/1850/12228.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Lyyttkäinen, Katja Johanna. "Control of complex structural geometry in optical fibre drawing /". Connect to full text, 2004. http://setis.library.usyd.edu.au/adt/public_html/adt-NU/public/adt-NU20041011.120247.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Optical fibers"

1

Midwinter, John E. Optical fibers for transmission. Malabar, FL: Krieger Pub. Co., 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

C, Schlesinger Jürgen, red. Optical fibers research advances. New York: Nova Science Publishers, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

S, Emersone Peter, red. Progress in optical fibers. Hauppauge, NY: Nova Science Publishers, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Izawa, T. Optical fibers: Materials and fabrication. Tokyo: KTK Scientific Publishers, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Alexis, Méndez, i Morse T. F, red. Specialty optical fibers handbook. Amsterdam: Academic Press, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Cancellieri, Giovanni. Single-mode optical fibres. Oxford: Pergamon Press, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Buck, John A. Fundamentals of optical fibers. Wyd. 2. Hoboken, N.J: John Wiley & Sons, 2004.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Buck, John A. Fundamentals of optical fibers. New York: Wiley, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

1942-, Matsumura Hiroyoshi, red. Infrared optical fibers. Bristol: A. Hilger, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Paschotta, Rüdiger. Field guide to optical fiber technology. Bellingham, Wash: SPIE Press, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Optical fibers"

1

Veit, Dieter. "Optical Fibers". W Fibers, 819–27. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15309-9_40.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Ahluwalia, Gurinder Kaur. "Optical Fibers". W Applications of Chalcogenides: S, Se, and Te, 161–96. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41190-3_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sabella, R., i P. Lugli. "Optical Fibers". W High Speed Optical Communications, 56–73. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-5275-8_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Koshiba, Masanori. "Optical Fibers". W Optical Waveguide Theory by the Finite Element Method, 113–31. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-1634-3_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Chartier, Thierry. "Optical Fibers". W Springer Handbook of Glass, 1405–39. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-93728-1_41.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Degiorgio, Vittorio, i Ilaria Cristiani. "Optical Fibers". W Photonics, 171–92. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20627-1_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Nolan, Daniel A., Paul E. Blaszyk i Eric Udd. "Optical Fibers". W Fiber Optic Sensors, 9–33. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118014103.ch2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ghatak, Ajoy, i K. Thyagarajan. "Optical Fibers". W Springer Handbook of Lasers and Optics, 1171–208. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-19409-2_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Personick, Stewart D. "Optical Fibers". W Fiber Optics, 6–45. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4899-3478-9_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gooch, Jan W. "Optical Fibers". W Encyclopedic Dictionary of Polymers, 504. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_8217.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Optical fibers"

1

Banerjee, Hritwick, Nicola Bartolomei i Fabien Sorin. "Soft Microstructured Optical Fibers via Thermal Drawing". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.som2h.1.

Pełny tekst źródła
Streszczenie:
The preform-to-fiber thermal drawing of thermoplastic elastomers enables the fabrication of soft multi-material optical fibers with complex architectures. It offers unprecedented opportunities to realize complex soft optical fibers for transmission and sensing.
Style APA, Harvard, Vancouver, ISO itp.
2

Khramov, I., i O. Ryabushkin. "Fiber Laser Power Measurements Using Optical Fibers with Metal Winding". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.soth3g.3.

Pełny tekst źródła
Streszczenie:
Various optical fibers with copper winding were used for the real-time measuring the fiber lasers output optical power. The mathematical model of the fiber heating allowed determining the induced microbending losses.
Style APA, Harvard, Vancouver, ISO itp.
3

Lyu, Zhouping, i Lyubov V. Amitonova. "Hollow-core fiber imaging". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu4i.4.

Pełny tekst źródła
Streszczenie:
Multimode fibers serve as high-resolution imaging probes. We show that a hollow-core fiber solves the problems of high background and limited NA. We experimentally demonstrate high-NA raster-scan and compressive imaging through a hollow-core multimode fiber.
Style APA, Harvard, Vancouver, ISO itp.
4

Knight, J. C. "Optics in Microstructured and Photonic Crystal Fibers". W Workshop on Specialty Optical Fibers and their Applications. Washington, D.C.: Optica Publishing Group, 2008. http://dx.doi.org/10.1364/wsof.2008.ps3.

Pełny tekst źródła
Streszczenie:
The development of optical fibers with two-dimensional patterns of air holes running down their length has reinvigorated research in the field of fiber optics. It has greatly–and fundamentally–broadened the range of specialty optical fibers, by demonstrating that optical fibers can be more “special” than previously thought. Fibers with air cores have made it possible to deliver energetic femtosecond-scale optical pulses, transform limited, as solitons, using single-mode fiber. Other fibers with anomalous dispersion at visible wavelengths have spawned a new generation of single-mode optical supercontinuum sources, spanning visible and near-infrared wavelengths and based on compact pump sources. A third example is in the field of fiber lasers, where the use of photonic crystal fiber concepts has led to a new hybrid laser technology, in which the very high numerical aperture available sing air holes have enabled fibers so short they are more naturally held straight than bent. This paper describes some of the basic physics and technology behind these developments, illustrated with some of the impressive demonstrations of the past 18 months.
Style APA, Harvard, Vancouver, ISO itp.
5

Jiang, Shibin. "2 Micron Fiber Lasers Using Silicate Glass Fibers". W Specialty Optical Fibers. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/sof.2014.sotu2b.1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Melli, F., K. Vasko, L. Rosa, L. Vincetti i F. Benabid. "Transverse Roughness Effect on Fundamental Mode Confinement Loss and Modal Content of Hollow-Core Inhibited Coupling Tube Lattice Fibers". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu1i.3.

Pełny tekst źródła
Streszczenie:
The effects of the transverse surface roughness on fiber loss and modal content in hollow-core inhibited coupling tube lattice fibers is numerically investigated. Relationship between roughness spectrum and loss of core modes is assessed.
Style APA, Harvard, Vancouver, ISO itp.
7

Villatoro, Joel. "Coupled-core optical fiber sensing". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.soth1h.3.

Pełny tekst źródła
Streszczenie:
The use of optical fibers with coupled cores is proposed for sensing applications. The interrogation of coupled-core fiber sensors is simple, fast and inexpensive as the parameter being sensed can be detected as intensity changes.
Style APA, Harvard, Vancouver, ISO itp.
8

Jiang, Shibin. "Multi-Component Glass Fibers for 2 Micron Fiber Lasers". W Specialty Optical Fibers. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/sof.2011.somb4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Naghdi, Behnam, Lixian Wang, Manish Sharma i Zhiping Jiang. "Highly Dispersive yet Low Loss Hollow Core Fibers by Using a Combination of Anti-resonant and Resonant Elements". W Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu1i.6.

Pełny tekst źródła
Streszczenie:
To achieve a dispersive fiber, we propose and numerically investigate an approach based on adding resonant elements to anti-resonant hollow core fibers (AR-HCF). Dispersion as large as 17,600 ps.nm − 1.km − 1 is obtained along with < 21dB.km − 1 confinement loss.
Style APA, Harvard, Vancouver, ISO itp.
10

Schuster, Kay, Hartmut Lehmann, Tino Elsmann, Tobias Habisreuther i Sebastian Dochow. "Specialty Fibers for Fiber-optic Sensors". W Optical Fiber Communication Conference. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/ofc.2014.tu3k.1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Optical fibers"

1

Rand, S. C. Optical Fibers for Nonlinear Optics. Fort Belvoir, VA: Defense Technical Information Center, październik 1986. http://dx.doi.org/10.21236/ada174518.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Bryant, George G. Fatigue Resistant Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, maj 1991. http://dx.doi.org/10.21236/ada237568.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

DeShazer, Larry, Antonio Pastor i Stephen Rand. Investigation of Optical Fibers for Nonlinear Optics. Fort Belvoir, VA: Defense Technical Information Center, listopad 1985. http://dx.doi.org/10.21236/ada164075.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Morse, T. F. Novel Optical Fibers and Devices. Fort Belvoir, VA: Defense Technical Information Center, maj 1995. http://dx.doi.org/10.21236/ada297050.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Miniscalco, W. J., T. Wei i P. K. Onorato. Radiation Hardened Silica-Based Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, grudzień 1988. http://dx.doi.org/10.21236/ada206910.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Miniscalco, W. J., T. Wei i P. I. Onorato. Radiation Hardened Silica-Based Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, październik 1986. http://dx.doi.org/10.21236/ada178466.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Menyuk, C. R. Pulse propagation in inhomogeneous optical fibers. Office of Scientific and Technical Information (OSTI), maj 1992. http://dx.doi.org/10.2172/7016315.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Hughes, R. J., G. G. Luther, G. L. Morgan, C. G. Peterson i C. Simmons. Quantum cryptography over underground optical fibers. Office of Scientific and Technical Information (OSTI), maj 1996. http://dx.doi.org/10.2172/251411.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Hill, Kent B., i Carl A. Villarruel. POTDR Measurements on Buried Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, sierpień 1998. http://dx.doi.org/10.21236/ada351903.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Engelsrath, A., B. L. Danielson i D. L. Franzen. Attenuation measurements on deformed optical fibers. Gaithersburg, MD: National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.ir.86-3052.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Optical fibers” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii