Gotowa bibliografia na temat „Non-Standard bending test”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Non-Standard bending test”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Non-Standard bending test"
Liu, Chao, Ning Ding, Jingsong Duan, Lili Zhou, Shanfu Cui, Shuna Jiang i Aofei Li. "Precise mathematical model for the ratchet tooth root bending stress". Mechanical Sciences 12, nr 2 (20.12.2021): 1105–13. http://dx.doi.org/10.5194/ms-12-1105-2021.
Pełny tekst źródłaKalia, Ajit, Juhi Joshi, Mohammed Mandsaurwala, Sayali Bobade i Azmat Azha Khan. "Esthetic nickel titanium wires– Do they deliver the same force?" IP Indian Journal of Orthodontics and Dentofacial Research 8, nr 4 (15.12.2022): 260–66. http://dx.doi.org/10.18231/j.ijodr.2022.045.
Pełny tekst źródłaChai, Teck Jung, Tan Cher Siang, Tang Hing Kwong i Koh Heng Boon. "Bending Strength of Magnesium Oxide Board". Key Engineering Materials 879 (marzec 2021): 169–78. http://dx.doi.org/10.4028/www.scientific.net/kem.879.169.
Pełny tekst źródłaKunecký, Jiří, Václav Sebera, Jan Tippner, Hana Hasníková, Michal Kloiber, Anna Arciszewska-Kędzior i Jaromír Milch. "Mechanical Performance and Contact Zone of Timber Joint With Oblique Faces". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 63, nr 4 (2015): 1153–59. http://dx.doi.org/10.11118/actaun201563041153.
Pełny tekst źródłaKosior-Kazberuk, Marta, i Rafał Wasilczyk. "Influence of static long-term loads and cyclic freezing/thawing on the behaviour of concrete beams reinforced with BFRP and HFRP bars". MATEC Web of Conferences 174 (2018): 04013. http://dx.doi.org/10.1051/matecconf/201817404013.
Pełny tekst źródłaSusanto, Eko, Yulian Maheswara i Akhmad Basuki Widodo. "Bending Strength of Apus Bamboo Fiber Reinforced Asphalt Composite Materials as Small Ship". BERKALA SAINSTEK 10, nr 4 (10.12.2022): 195. http://dx.doi.org/10.19184/bst.v10i4.32604.
Pełny tekst źródłaVu, Ngoc-Hung, Xuan-Tan Pham, Vincent François i Jean-Christophe Cuillière. "Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, nr 17 (7.07.2019): 6167–76. http://dx.doi.org/10.1177/0954406219861126.
Pełny tekst źródłaDeTora, M., i K. Kraus. "Mechanical testing of 3.5 mm locking and non-locking bone plates". Veterinary and Comparative Orthopaedics and Traumatology 21, nr 04 (2008): 318–22. http://dx.doi.org/10.3415/vcot-07-04-0034.
Pełny tekst źródłaConcli, Franco. "Numerical Study of the Impact of Shot Peening on the Tooth Root Fatigue Performances of Gears Using Critical Plane Fatigue Criteria". Applied Sciences 12, nr 16 (18.08.2022): 8245. http://dx.doi.org/10.3390/app12168245.
Pełny tekst źródłaFuentes-Talavera, F. J., J. A. Silva-Guzmán, R. Rodríguez-Anda, M. G. Lomelí-Ramírez, R. Sanjuán-Dueñas i H. G. Richter. "Strength properties and natural durability of Avocado (Persea americana Mill.) branch wood". Madera y Bosques 17, nr 1 (30.08.2016): 37–47. http://dx.doi.org/10.21829/myb.2011.1711153.
Pełny tekst źródłaRozprawy doktorskie na temat "Non-Standard bending test"
Salloum, Joulia. "Comportement mécanique de Matériaux Sandwichs Innovants pour application nautique". Electronic Thesis or Diss., IMT Mines Alès, 2023. http://www.theses.fr/2023EMAL0017.
Pełny tekst źródłaThis work consists of an experimental and numerical study of the mechanical behaviour of sandwich composite materials used in the nautical industry, up to damage occurrence and its evolution. For eco-design purposes, the facings are made of NCF triaxial basalt fibre laminates and a partially bio-sourced resin (greenpoxy), and the core consists of recycled PET foam. In addition to preparing these materials via vacuum infusion and conducting their microstructural and mechanical characterisation, the main goal of this study is to develop a robust model capable of predicting the response of these sandwich materials under static loading. It is worth noting that all conducted mechanical tests, including compression of the foam alone, simple traction of the monolithic in different directions, or bending of the sandwich composite, are instrumented by image correlation on multiple sides of the specimen to monitor the real-time damage evolution. Furthermore, a 3D finite element study of the mechanical response of the single components (foam and monolithic) and the sandwich is carried out based on Abaqus® simulations to assess the applicability of failure criteria and damage evolution methods. For instance, regarding the foam, the "crushable foam" model was used to predict its collapse within the sandwich structure. As for the monolithic, a progressive damage model of the fibre/matrix constituents is adopted within each ply, and cohesive elements between adjacent plies are used to account for delamination on a mesoscopic scale. This methodology aims to predict the initiation and accumulation of damage in the laminate. The proposed methodology is generic and provides an evolving basis for introducing the concept of cohesion between fibre and matrix, the effectiveness of which is intended for evaluation
Części książek na temat "Non-Standard bending test"
Sharifi Ghaderi, Javad. "Determining the Characteristics of Acoustic Emission in the Fatigue Crack Growth of Aluminum Alloy 2025 for Online Structural Monitoring". W Advances in Fatigue and Fracture Testing and Modelling [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99360.
Pełny tekst źródłaStreszczenia konferencji na temat "Non-Standard bending test"
Ferreira, Denis Alves, Vagner Pascualinotto Junior i Diego F. B. Sarzosa. "Test Protocol Definition to Measure Fracture Toughness J-Parameter Using Non-Standard Four-Point Bending Specimens". W ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21592.
Pełny tekst źródłaVan Wittenberghe, Jeroen, Patrick De Baets i Wim De Waele. "Non-Linear Contact Analysis of an API Line Pipe Coupling". W ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77775.
Pełny tekst źródłaZhu, Xian-Kui. "Methods to Determine Low-Constraint Fracture Toughness: Review and Progress". W ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63662.
Pełny tekst źródłaStephens, Michael John, Simon John Roberts i Derek James Bennet. "A Validated Methodology to Establish Structural Capacities for Subsea Connector Families". W SPE Offshore Europe Conference & Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205412-ms.
Pełny tekst źródłaAdams, Douglas J., Svetlana Lublinsky i Mauricio Barrero. "Test Methods for Accurate and Robust Material Property Measurements of Rodent Cortical Bone". W ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-192893.
Pełny tekst źródłaYin, Shengjun, Paul T. Williams, Hilda B. Klasky i B. Richard Bass. "Analysis of Ductile Crack Growth in Pipe Test in STYLE Project". W ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78518.
Pełny tekst źródłaLagat, Christopher, Reem Roufail, Vamegh Rasouli, Brian Evans i Soren Soe. "Experimental Investigation of Steel Coiled Tubes Performance Under Cyclic Bending". W ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23208.
Pełny tekst źródłaSaldanha, Faber A., V. Venkateswara Rao, J. Christopher i Raviraja Adhikari. "Investigations on Concepts for Modularizing a Horizontal Axis Wind Turbine Blade". W ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12069.
Pełny tekst źródłaSalazar, Julio Alberto Boix, Dirk F. de Lange i Hugo I. Medellín Castillo. "Elastoplastic Analysis of the Erichsen Cupping Test Using Comsol Multiphysics FEM Code". W ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39018.
Pełny tekst źródłaLadpli, Purim, Raphael Nardari, Raunaq Rewari, Hongjian Liu, Michael Slater, Keith Kepler, Yinan Wang, Fotis Kopsaftopoulos i Fu-Kuo Chang. "Multifunctional Energy Storage Composites: Design, Fabrication, and Experimental Characterization". W ASME 2016 10th International Conference on Energy Sustainability collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/es2016-59416.
Pełny tekst źródłaRaporty organizacyjne na temat "Non-Standard bending test"
Chauhan, Vinod. L52307 Remaining Strength of Corroded Pipe Under Secondary Biaxial Loading. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), sierpień 2009. http://dx.doi.org/10.55274/r0010175.
Pełny tekst źródła