Gotowe bibliografie tematyczne / Nano Molding

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Nano Molding”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Nano Molding”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Nano Molding"

1

Ito, Hiroshi. "Micro-/Nano-Molding". Seikei-Kakou 30, nr 7 (25.06.2018): 371–78. http://dx.doi.org/10.4325/seikeikakou.30.371.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

ITO, Hiroshi. "Nano/Micro-Molding". Journal of the Japan Society for Technology of Plasticity 57, nr 663 (2016): 340–44. http://dx.doi.org/10.9773/sosei.57.340.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Zhang, Nan, Cormac J. Byrne, David J. Browne i Michael D. Gilchrist. "Towards nano-injection molding". Materials Today 15, nr 5 (maj 2012): 216–21. http://dx.doi.org/10.1016/s1369-7021(12)70092-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Choi, Doo Sun, Tae Jin Je, Young Ho Seo i Kyung Hyun Whang. "Nano Pattern Mold Technology Using Nano Stamper Based on Quartz". Key Engineering Materials 277-279 (styczeń 2005): 912–18. http://dx.doi.org/10.4028/www.scientific.net/kem.277-279.912.

Pełny tekst źródła
Streszczenie:
In this paper, we present a reusable quartz master fabricated by electron-beam lithography and the results of the preliminary test of injection molding using the reusable quartz master. Since patterned structures of photoresist can be easily damaged by demolding process of nickel stamper and master, a master with photoresist cannot be reused in stamper fabrication process. In this work, we have made it possible of the repeated use of master by directly patterning on quartz in nickel stamper fabrication process. We have developed a 100nm-pit sized reusable quartz master with intaglio carving patterns of finer sizes than those of DVD (400nm) and blue-ray disc (200nm). In the preliminary test of the injection molding, we have found optimum injection molding conditions using polypropylene.
Style APA, Harvard, Vancouver, ISO itp.
5

ITO, Hiroshi. "Polymer Micro-and Nano-Molding". Journal of the Japan Society for Technology of Plasticity 52, nr 610 (2011): 1143–47. http://dx.doi.org/10.9773/sosei.52.1143.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Schift, Helmut, Sunggook Park i Jens Gobrecht. "Nano-Imprint-Molding Resists for Lithography". Journal of Photopolymer Science and Technology 16, nr 3 (2003): 435–38. http://dx.doi.org/10.2494/photopolymer.16.435.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Mao, Huajie, Bo He, Wei Guo, Lin Hua i Qing Yang. "Effects of Nano-CaCO3 Content on the Crystallization, Mechanical Properties, and Cell Structure of PP Nanocomposites in Microcellular Injection Molding". Polymers 10, nr 10 (17.10.2018): 1160. http://dx.doi.org/10.3390/polym10101160.

Pełny tekst źródła
Streszczenie:
Using supercritical nitrogen as the physical foaming agent, microcellular polypropylene (PP) nanocomposites were prepared in microcellular injection molding. The main purpose of this work is to study effects of content of nano-CaCO3 on the crystallization, mechanical properties, and cell structure of PP nanocomposites in microcellular injection molding. The results show that adding nano-CaCO3 to PP could improve its mechanical properties and cell structure. The thermal stability and crystallinity enhances with increase of nano-CaCO3. As a bubble nucleating agent, adding nano-CaCO3 to PP improves the cell structure in both the parallel sections and vertical sections. The mechanical properties increase first and then decrease with increase of nano-CaCO3. The mechanical properties are affected by the cell structure, as well. The mechanical properties and cell structure are optimum when the content of nano-CaCO3 is 6 wt %.
Style APA, Harvard, Vancouver, ISO itp.
8

Amano, Akira. "Nano-Level Surface Machining for Molding Die". Seikei-Kakou 21, nr 4 (20.03.2009): 172–77. http://dx.doi.org/10.4325/seikeikakou.21.172.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Yoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je i Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays". Key Engineering Materials 326-328 (grudzień 2006): 449–52. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.449.

Pełny tekst źródła
Streszczenie:
An injection molding technology is developed to replicate pillars in micro/nano scale on the thin plastic substrate. Two types of pillar are to be replicated and one is square type of 10um x 10um, the other is circular type whose diameter is in range of 100 nm ~ 300 nm. For both types of the pillars, the height is about 250 nm. A pattern master is first fabricated on the photo resist(PR) layer spin coated to about 250nm of thickness on chrome/quartz plate by patterning e-beam writing and then developing the PR. The patterns on the PR master are transferred by nickel electro-plating to fabricate rigid nickel stamper. Using this nickel stamper, a substrate with nano pillars on its surface is injection molded by optimizing the conditions to fabricate DNA separating chip.
Style APA, Harvard, Vancouver, ISO itp.
10

Nishiyabu, Kazuaki, Kenichi Kakishita i Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders". Materials Science Forum 534-536 (styczeń 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.

Pełny tekst źródła
Streszczenie:
This study aims to investigate the effects of hybrid micro/nano powders in a micro metal injection molding (μ-MIM) process. A novel type of mixing-injection molding machine was used to produce tiny specimens (<1mm in size) with high trial efficiency using a small amount of feedstock (<0.05cm3 in volume). Small dumbbell specimens were produced using various feedstocks prepared by changing binder content and fraction of nano-scale Cu powder (130nm in particle size). The effects of adding the fraction of nano-scale Cu powder on the melt viscosity of the feedstock, microstructure, density and tensile strength of sintered parts were discussed.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Nano Molding"

1

Sorgato, Marco. "Characterization of the micro injection molding of micro- and nano- structured polymer surfaces". Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424332.

Pełny tekst źródła
Streszczenie:
The micro injection moulding process has a set of advantages that makes it commercially interesting, with potential for further developments in the future. In this sense, its application to the replication of surfaces characterized by micro and nano-structures has been the focus of many researches. In this work, the micro injection moulding process for the manufacturing of nanofeatures and high AR microfeatures was characterized, focusing on the challenges and limitations in the replication. This research completely characterized the micro injection moulding technology, not only considering the process parameters, but also considering the material properties, the interaction between polymer and mould material, and the use of auxiliary technologies like cavity air evacuation and rapid heat cycle moulding. The carried out work confirms previous findings and contributes to extend the state-of-the-art knowledge about the micro injection moulding process, which is considering nowadays a reliable and cost effective means of producing a wide range of micro components in thermoplastics materials.
Tra i processi per la produzione di componenti micro e nano strutturati, il processo di micro stampaggio a iniezione presenta una serie di vantaggi che lo rendono commercialmente interessante. Tale tecnologia è caratterizzata da un elevato grado di riproducibilità, che la rende idonea alla produzione di massa di micro componenti in materiale termoplastico. Parlando di micro prodotti, la qualità del pezzo stampato risulta essere di fondamentale importanza e per questo, negli ultimi decenni, lo studio dei fattori che influenzano la qualità del prodotto finito, sono stati al centro di numerose indagini. Questo lavoro di tesi si pone come obbiettivo l'analisi del processo di micro stampaggio per la produzione di componenti micro e nano strutturati aventi features ad elevato rapporto di forma. Lo studio si concentra soprattutto sulle limitazioni del processo, utilizzando come casi studio delle geometrie particolarmente critiche per il micro stampaggio a iniezione. La caratterizzazione del processo e l'individuazione dei sui limiti sono stati indagati non solo considerando i parametri che influenzano la qualità del prodotto finito, ma anche le proprietà dei materiali termoplastici impiegati, l'interazione tra materiale plastico e stampo, e l'utilizzo di tecnologie ausiliarie come il riscaldamento e raffreddamento rapido dello stampo e l'evacuazione forzata dell'aria dalla cavità. I risultati confermano quanto riportato in letteratura e contribuiscono ad estendere lo stato dell'arte sul processo di micro stampaggio a iniezione, il quale rappresenta ad oggi una tecnologia affidabile ed economicamente efficace per la produzione su larga scala di micro componenti in materiale plastico in diversi settori industriali.
Style APA, Harvard, Vancouver, ISO itp.
2

Peng, Zirong [Verfasser]. "Nano-scale investigation of the degradation mechanism of multilayer protective coating for precision glass molding / Zirong Peng". Aachen : Shaker, 2018. http://d-nb.info/1186590084/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Peng, Cheng-Chang, i 彭成彰. "Nano injection molding and optical property". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/31664322896088917957.

Pełny tekst źródła
Streszczenie:
碩士
國立中央大學
機械工程學系在職專班
102
A rapid, cost-effective and high-throughput process for nanotexturing subwavelength structures with high uniformity using the polycarbonate (PC) is realized via injection nanomolding. The process enables the precise control of nanohole array (NHA) surface topography (nanohole depth, diameter, and periodicity) over large areas thereby presenting a highly versatile platform for fabricating substrates with user-defined, functional performance. Specifically, the optical property of the PC substrates were systematically characterized and tuned through the modulation of the depths of NHA. The aspect ratio submicron holes can be easily modulated and experimentally proven by simply adjusting the molding temperature. The nanotextured depths were reliably fabricated in the range of 200 to 400 nm with a period of approximately 700 nm. The fabricated PC films can reduce the reflectivity from an original bare film of 10.2% and 8.9% to 1.4% and 2.1% with 400-nm depth of nanoholes at the wavelength of 400 and 550 nm, respectively. Compared with conventional moth-like nanostructures with nanopillar arrays with heights adjustable only by an etching process, this paper proposes a facile route with submicron holes to achieve a similar antireflective function, with a significantly reduced time and facile height modulation capability. Furthermore, the effects of multilayer coatings of dielectric and metallic layers on the nanomolded NHA have been performed and potential sensing application is explored.
Style APA, Harvard, Vancouver, ISO itp.
4

Wang, Wei-Tsan, i 王唯讚. "Molecular Dynamics Simulation of Molding Filling in Nano-Injection Molding Process". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/32393555864076768289.

Pełny tekst źródła
Streszczenie:
碩士
國立清華大學
化學工程學系
94
In this research, molecular dynamics simulation is adopted to simulate the molding filling in nano-injection molding process. Our work divided into two parts is as follows. (I) Glass transition temperature : Molecular dynamics is adopted to simulate the glass transition temperature of polypropylene at different chain length, and the chain length has 200, 400 and 800 , respectively. The simulated purpose is to explore the relation between the chain length(molecular weight) of polymer and the glass transition temperature of polymer. (II) We adopt molecular dynamics to simulate the nano-scale injection molding process, and investigate the defects during molding filling process. With decreasing the injection velocity, the adsorption phenomena at the entrance of mold will become more obvious. The orientation of polymer is obvious at the wall of runner and the wall which faces the entrance of mold. While the temperature of system at 350 K, polymer has less tendency to adsorb on the wall.
Style APA, Harvard, Vancouver, ISO itp.
5

Qiu, S. W., i 邱仕文. "The application of nano-materals in microinjection molding". Thesis, 2004. http://ndltd.ncl.edu.tw/handle/38494403785544433218.

Pełny tekst źródła
Streszczenie:
碩士
龍華科技大學
機械系碩士班
92
The miniaturization of components and systems has been progressing rapidly due to the developments in microelectronics, communication, optoelectronics, and biotechnology. Recently, the use of plastic material is becoming a potential alternative due to its versatile property and ease of batch fabrication. Most micro parts, such as gears and fans, need a strong structural capability to resist abrasive. Only plastic material cannot satisfy this requirement. Fillers or fibers are tried to add into plastic compounds to enforce structural strength. But, compounds and reinforced plastics have not been used successfully in the micro moulding process. Thus, the nano-particles were introduced into plastic to enforce structural strength and improve filling properties. This thesis studied the processing and wearing properties of nano-composites. The filling and wear properties of nano-materials, SiO2, TiO2, and ZnO with 10%, 20%, and 30% weight content, respectively, introduced to PP were tested. The processing characteristics of a mold with 4 cavities and an IC micro-structure were observed. Experimental results show that the shrinkage of micro-parts with high pressure, impact velocity, cooling rate was significantly reduced. However, the shrinkage was slightly increased when mold temperature was promoted. The shrinkage was decreased as nano-particle contents were increased. The nano-composite with 30% SiO2 reduced 55% in shrinkage compared to pure PP. The filling properties of IC micro-structure using ZnO nano-materials had an outstanding result. The filling properties of nano-material with 10% nano-particles were better than those of 20% and 30% nano-particles contents. However, the filling property was worse when POM with bigger particles was introduced. The hardness of nano-composites was increased as the weight content in PP was increased. The nano-material with 30% SiO2 promoted 24% in hardness compared to pure PP. However, wear resistance was decreased as the nano-material content was increased in SiO2 and TiO2. But wear resistance was slightly promoted when ZnO particles were used. From TGA testing, the decomposition was increased and serious in SiO2 and TiO2 resulting melting temperature was decreased. The decomposition was reduced in ZnO resulting the melt temperature was not decreased. The results show that the filling properties were outstanding when nano-particles were introduced into plastic pellets. The wear resistance was reduced if not suitable nano-materials were chosen.
Style APA, Harvard, Vancouver, ISO itp.
6

Lu, Ping-Hang, i 呂秉翰. "Molecular Dynamics Simulation of Injection Molding Filling System on Nano-Scale Flow". Thesis, 2007. http://ndltd.ncl.edu.tw/handle/42142350101665855108.

Pełny tekst źródła
Streszczenie:
碩士
國立清華大學
化學工程學系
95
In this research, molecular dynamics simulation is adopted to simulate the glass transition temperature of polyethlene and the molding filling in nano-injection molding process. Our work divided into two parts is as follows. I. Glass transition temperature：Molecular dynamics is adopted to simulate the glass transition temperature of polymer at different chain lengths, and the chain lengths are 100,200,400 and 800, respectively. The purpose of the simulation is to explore not only the relation between the chain length and the glass transition temperature of polymer, but also the relation between the pressure and the glass transition temperature of polymer at the same chain length. II. Unsteady nano injection molding：With increasing chain length, the density of local system gets more uniform.The probability of warpage becomes great with increasing the interaction between metal particle and polymer particle. Besides, the simulation results between Pt and Au are almost the same. However, if the injection velocity is too large, more plastics will be wasted and the filling quality is relatively bad. Finally, when the temperature is on the increase, the polymer gets easier to be processed and the density in the mold gets more uniform.
Style APA, Harvard, Vancouver, ISO itp.
7

Ho, Chang-En, i 何長恩. "Study on the Molding of Nano- and Micro-features Using Injection and Imprint Techniques". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/30024667961040932032.

Pełny tekst źródła
Streszczenie:
碩士
龍華科技大學
工程技術研究所
97
In recent years, there is a considerable development in technique which has been a tempting trend of miniaturization in production technology and the techniques which demands the quality and structures which face the role in nanotechnology. In this study, molding of nano-and micro-features using injection and imprint technique is focused. A square, silicon grating in a 3x3 mm2 array, with a depth of 82 nm 1.5µm 0.9µm, and a pitch of 3.0µm. The grating costs only about NT 4000. It provides a simple way to replicate high quality nano-scale molded parts by using a simple custom-made injection machine and hot embossing machine results in manufacturing the different shape and the structure depth nano-and micro-features part. In the injection molding process, nano-and micron structures will be masked in the mold inserts molds with a simple silicon dye using the assist of simple custom-made injection machine. In this technique polymethylmethacrylate (PMMA) and polycarbonate (PC) act as the nano-micro-features. In the analysis the depth of 82 nm and 0.9 μm can be produced by the micro-structural formability. It is a low-cost and fast way to successfully produce high-precision nano-and micro structural elements. The results shows that, when the simple mold and custom-made machine were employed, structure is encountered with the nano-micron micro-structure shape, by improve the mold temperature and injection pressure, which can be a clear edge and the surface of a higher quality. Generally in the press printing process, nano-micro-features structure can be produced 82 nm, 1.5 μm and 0.9 μm can be obtained. An optical film of PMMA and PC is used in molding experiments. The depth of 82 nm, 1.5 μm and 0.9 μm can be produced by the micro-structural formability. To identify the glass transition temperature thermal analysis instruments were used to control the parameters as a reference. For a silicone mold-jet we required the imprinted molding window. A single parameter method is used to investigate the dye temperature imprints pressure, imprint time and ejection temperature of nano and micro-structure for the surface roughness and shape effects. The result shows that, forming a high pressure and imprinted with the injection temperature is linear. If the Injection temperature is closer to the glass transition temperature, will be difficult to form the shapes and also affects the roughness of the most significant process parameters in the ejection temperature. To investigate the surface morphology of the obtained micron-sized structures we require Chanai electron microscopy. Further to make the measurements of height and surface roughness of the samples we use atomic force microscope (AFM), Chennai-micron structure of its.
Style APA, Harvard, Vancouver, ISO itp.
8

Huang-YaLin i 林晃業. "Experimental and Analytical Study on Filling of Nano and Micro Structures in Micro Injection Molding". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/91745851280465541640.

Pełny tekst źródła
Streszczenie:
博士
國立成功大學
航空太空工程學系碩博士班
98
Nano and micro technology is attracting more attention and has increasing applications in recent years. Among the products with applications of nano technology, many of them are made of polymer plastics. Micro injection molding is one of the important processes for polymer plastics. In micro injection molding, the ability for the polymer melt to flow into the micro/nano features is a crucial factor for successful molding. The flow behavior of polymer in micro/nano features needs to be explored further to facilitate the molding process. In this study, we investigated the effects of the processing conditions on the filling of micro/nano features analytically and experimentally. Firstly, mold inserts with micro or nano features were constructed by LIGA-LIKE process. Secondly, an analytical model was developed to model the filling of polymer melt in the micro/nano features. Molding experiments were performed to verify the analytical filling model. With this verified model, a theoretical filling distance can be predicted for the micro/nano injection molding, and the suitable processing conditions can be estimated for different geometries of product. Finally, the Infrared heating system is introduced to improve the penetration distance in nano feature filling.
Style APA, Harvard, Vancouver, ISO itp.
9

Tareq, Saif. "Fabrication and characterisation of polymeric nano-composites". Thesis, 2019. http://hdl.handle.net/1959.7/uws:51728.

Pełny tekst źródła
Streszczenie:
In this study, graphitised multi-walled carbon nanotubes (GMWCNT) are used to reinforce high impact polystyrene (HIPS) as base material for fabricating nanoparticle reinforced composites with improved material properties – GMWCNTHIPS. For two phases composite, three weight percentages of nanoparticles in the devised nanocomposites - 1wt%, 3wt% and 5wt% are selected and 2wt% of three phase composite, 1wt% of GMWCNT and 1wt% of graphitized carbon nanofibers (GCNF), to investigate its weight fraction’s influence on material properties and mechanical behaviours. The nano-composites are fabricated using moulding injection in lab as standard ASTM samples. These samples are then employed for mechanical tests including uniaxial tension test and four-point bending test. A microstructural analysis of the samples is conducted to determine the microstructure of GMWCNT-HIPS nano-composites, in particular for the interfacial zone of nanotube and base material. Meanwhile a finite element analysis is developed and applied for modelling the uniaxial tension and four-point bending and conducting a parametric study to guide the adjustment of main control parameters of moulding injection process as a material design tool. The obtained results show that the mechanical properties of final-product materials are influenced by manufacturing processes and controlled by main factors that affect that processes. Also, 3D printing, also referred to additive manufacturing (AM), has been developed as a revolutionary manufacturing process, becoming a potential process to replace conventional manufacturing processes. 3D printing process – Fused Deposition Modelling/Fused Filament Fabrication (FDM/FFF) has been developed to rapidly print thermoplastic products while the traditional manufacturing process – injection moulding has been well developed for making thermoplastic products with a long history. In this research, a comparative study is experimentally conducted to investigate material properties and mechanical behaviours of two commonly-used 3D printing thermoplastic materials – Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) via uniaxial tension and three point bending tests according to ASTM standard. The mechanical properties of final product materials are influenced by manufacturing processes and controlled by main factors that affect that processes. In order to optimise the 3D printing process using available 3D printers at lab, correlations between main control parameters and material properties of ABS and PLA are extracted based on the experimental results obtained considering the mould injection as a benchmarking process. A series of finite element analyses are developed and applied for conducting a parametric study to guide the adjustment of main control parameters of layer-by-layer 3D printing process as a material design tool.
Style APA, Harvard, Vancouver, ISO itp.
10

Goswami, Arjyajyoti. "Development of micro/nano structured surfaces". Thesis, 2017. http://localhost:8080/iit/handle/2074/7445.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Nano Molding"

1

Hot Embossing Micro Nano Technologies. William Andrew Publishing, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Tosello, Guido, red. Latest Advancements in Micro Nano Molding Technologies – Process Developments and Optimization, Materials, Applications, Key Enabling Technologies. MDPI, 2022. http://dx.doi.org/10.3390/books978-3-0365-5433-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Nano Molding"

1

Abdul Manaf, Ahmad Rosli, i Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications". W Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Abdul Manaf, Ahmad Rosli, i Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications". W Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Abdul Manaf, Ahmad Rosli, i Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications". W Micro/Nano Technologies, 661–90. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_21.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Lee, H. K., G. E. Yang i Hong Gun Kim. "Residual Stress and Surface Molding Conditions in Thin Wall Injection Molding". W Macro-, Meso-, Micro- and Nano-Mechanics of Materials, 137–42. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-979-2.137.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Zhou, Tianfeng. "Precision Molding of Microstructures on Chalcogenide Glass for Infrared Optics". W Micro/Nano Technologies, 635–59. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_20.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Abliz, Dilmurat, i Gerhard Ziegmann. "Liquid Composite Molding Processes". W Acting Principles of Nano-Scaled Matrix Additives for Composite Structures, 79–88. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68523-2_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Yoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je i Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays". W Experimental Mechanics in Nano and Biotechnology, 449–52. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.449.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Shin, Hong Gue, Heon Young Kim i Byeong Hee Kim. "Nano Molding Technology for Optical Storage Media with Large-Area Nano-Pattern". W Optics Design and Precision Manufacturing Technologies, 925–30. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.925.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Vranić, Edina. "Micro-molding and Its Application to Drug Delivery". W Nano- and Microfabrication Techniques in Drug Delivery, 275–94. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-26908-0_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Nishiyabu, Kazuaki, Kenichi Kakishita i Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders". W Progress in Powder Metallurgy, 381–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.381.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Nano Molding"

1

Mogi, Katsuo, Yuki Hashimoto, Takatoki Yamamoto i Takehiko Tsukahara. "Nano-pattern molding technique using photocurable silicone elastomer". W 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2015. http://dx.doi.org/10.1109/nano.2015.7388788.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Wu, Cheng-Hsien, i Wei-Hsu Chen. "Injection molding of grating optical elements with microfeatures". W Smart Materials, Nano-, and Micro-Smart Systems, redaktorzy Jung-Chih Chiao, David N. Jamieson, Lorenzo Faraone i Andrew S. Dzurak. SPIE, 2005. http://dx.doi.org/10.1117/12.582425.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Li, Sijie, Hongxing Xie, Yun Ye, Sheng Xu, Enguo Chen i Tailiang Guo. "Injection molding and performance testing of quantum-dot diffusion plate". W Nanophotonics, Micro/Nano Optics, and Plasmonics VIII, redaktorzy Zhiping Zhou, Kazumi Wada, Limin Tong, Zheyu Fang i Takuo Tanaka. SPIE, 2023. http://dx.doi.org/10.1117/12.2643875.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Park, Jae Hong, Hyun Ik Jang, Jun Yong Park, Seok Woo Jeon, Woo Choong Kim, Hee Yeoun Kim i Chi Won Ahn. "Advanced nano lithography via soft materials-derived and reversible nano-patterning methodology for molding of infrared nano lenses". W SPIE Advanced Lithography, redaktorzy Douglas J. Resnick i Christopher Bencher. SPIE, 2015. http://dx.doi.org/10.1117/12.2080980.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Cui, Liangyu, Zhichen Huo i Dawei Zhang. "Ultrasonic Molding of Polymer Micro Devices". W 2019 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2019. http://dx.doi.org/10.1109/3m-nano46308.2019.8947356.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Shin, Jihyun, Shuji Tanaka i Masayoshi Esashi. "Nanostructured Silicon Carbide Molds for Glass Press Molding". W 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007. http://dx.doi.org/10.1109/nems.2007.352019.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Lucchetta, Giovanni, Davide Masato, Marco Sorgato i Nicola Milan. "Effect and Modeling of Ultrasound-Assisted Ejection in Micro Injection Molding". W WCMNM 2018 World Congress on Micro and Nano Manufacturing. Singapore: Research Publishing Services, 2018. http://dx.doi.org/10.3850/978-981-11-2728-1_26.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Tom, Alan M., Aleksandar K. Angelov i John P. Coulter. "An Experimental Investigation of a Micro Injection Molded Mechanical Device". W ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81968.

Pełny tekst źródła
Streszczenie:
The primary objective of this study, through a scientific experimental investigation, was to determine optimum injection molding processing parameters on semi-crystalline materials HDPE and POM focusing on mechanical properties, obtained thru the use of a nano-indenter, of micro gears being manufactured on non-heated and heated mold bases. A secondary objective was to initiate a similar experimental study using amorphous COC material. Taguchi’s method utilizing an L-9 orthogonal array was used to determine the effects of Tnoz, Tmold, Pinj, Vinj, Ppack, and tpack injection molding processing parameters. A nano-indenter was used to determine investigated mechanical properties on final injection molded parts that included stiffness (S), reduced modulus (Er), and hardness (H). Results showed HDPE, POM and COC, heated mold experiments exhibiting increases in mechanical properties S, Er, and H, on the order of 1.2–4.0 times those of non-heated molding trials. Decreases in optimum molding conditions for Tnoz, Pinj, and Ppack was also observed for heated molding trials. The highest mold temperatures and injection pressures tested did not produce greatest optimum molding conditions. However, largest packing times tested produced optimum molding conditions.
Style APA, Harvard, Vancouver, ISO itp.
9

Shao, Dongbing, Shifeng Li i Shaochen Chen. "Near-Field nano-molding of gold thin films by a pulsed laser". W ICALEO® 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2005. http://dx.doi.org/10.2351/1.5060599.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Marco, Sorgato, Masato Davide i Lucchetta Giovanni. "Injection Molding of Nano-Structured Polylactic Acid Surfaces for Bone Regeneration Studies". W Proceedings of the 4M/ICOMM2015 Conference. Singapore: Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_072.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Nano Molding"

1

DeSimone, Joseph, Jude Samulski, Jeffrey Frelinger i Sergio Sheiko. Replicating Viral Particles and other Shape-controlled, Functional Particles for Targeted Delivery Applications Using Nano-molding Techniques. Fort Belvoir, VA: Defense Technical Information Center, październik 2007. http://dx.doi.org/10.21236/ada482673.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams i Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), kwiecień 2022. http://dx.doi.org/10.21079/11681/43980.

Pełny tekst źródła
Streszczenie:
The impacts of Harmful Algal Blooms (HAB), often caused by cyanobacteria (Figure 1), on water resources are increasing. Innovative solutions for treatment of HABs and their associated toxins are needed to mitigate these impacts and decrease risks without introducing persistent legacy contaminants that cause collateral ecosystem impacts. This technical note (TN) identifies novel opportunities enabled by Additive Manufacturing (AM), or 3D printing, to produce high surface area advanced material composites to rapidly prototype sustainable environmental solutions for aquatic nuisance species control. This innovative research explores deployment of 3D-printable polymer composite structures containing nano-scale photocatalysts for targeted open water treatment of HABs that are customizable to the site-of-concern and also retrievable, reusable, and sustainable. The approach developed to control cyanobacteria HAB events has the potential to augment or replace broadcast, non-specific chemical controls that otherwise put non-target species and ecological resources at long-term risk. It can also augment existing UV-treatment HAB treatment control measures. The expected research outcome is a novel, effective, and sustainable HAB management tool for the US Army Corps of Engineers (USACE) and resource managers to deploy in their HAB rapid response programs. The research will provide a framework for scale-up into other manufacturing methods (e.g., injection molding) to produce the devices in bulk (quickly and efficiently). Research for this project title “Mitigation of Harmful Algal Bloom Toxins using 3D Printed Photocatalytic Materials (FY21-23)” was sponsored by the US Army Engineer Research Development Center’s (ERDC) Aquatic Nuisance Species Research Program (ANSRP).
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Nano Molding” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii