Gotowe bibliografie tematyczne / Musgrave Block (W.A.)

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Musgrave Block (W.A.)”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 10 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Musgrave Block (W.A.)”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Musgrave Block (W.A.)"

Bache, Francois, Paul Walshe, Juergen Gusterhuber, Sandra Menpes, Mattilda Sheridan, Sergey Vlasov i Lance Holmes. "Exploration of the south-eastern part of the Frontier Amadeus Basin, Northern Territory, Australia". APPEA Journal 58, nr 1 (2018): 190. http://dx.doi.org/10.1071/aj17221.

Pełny tekst źródła

Streszczenie:

The Neoproterozoic to Late Paleozoic-aged Amadeus Basin is a large (~170 000 km2) east–west-trending basin, bounded to the south by the Musgrave Province and to the north by the Arunta Block of the Northern Territory. Commercial oil and gas production is established in the northern part of the basin but the southern part is still a frontier exploration area. Vintage and new seismic reflection data have been used with well data along the south-eastern Amadeus Basin to construct a new structural and depositional model. Three major phases of deformation controlling deposition have been identified. The first phase is characterised by a SW–NE trending structural fabric and is thought to be older than the deposition of the first sediments identified above basement (Heavitree and Bitter Springs formations). The second phase corresponds to the Petermann Orogeny (580–540 Ma) and trends in a NW–SE orientation. The third phase is the Alice Springs Orogeny (450–300 Ma) and is oriented W–E to WNW–ESE in this part of the basin. This tectono-stratigraphic model involving three distinct phases of deformation potentially explains several critical observations: the lack of Heavitree reservoir at Mt Kitty-1, limited salt movements before the Petermann Orogeny (~300 Ma after its deposition) and salt-involved structures that can be either capped by the Petermann Unconformity and overlying Cambrian to Devonian sediments, or can reach the present day surface. Finally, this model, along with availability of good quality seismic data, opens new perspectives for the hydrocarbon exploration of the Amadeus Basin. Each of the tectonic phases impacts the primary petroleum system and underpins play-based exploration.

Style APA, Harvard, Vancouver, ISO itp.

Wex, Sebastian, Neil S. Mancktelow, Friedrich Hawemann, Alfredo Camacho i Giorgio Pennacchioni. "Inverted distribution of ductile deformation in the relatively “dry” middle crust across the Woodroffe Thrust, central Australia". Solid Earth 9, nr 4 (11.07.2018): 859–78. http://dx.doi.org/10.5194/se-9-859-2018.

Pełny tekst źródła

Streszczenie:

Abstract. Thrust fault systems typically distribute shear strain preferentially into the hanging wall rather than the footwall. The Woodroffe Thrust in the Musgrave Block of central Australia is a regional-scale example that does not fit this model. It developed due to intracontinental shortening during the Petermann Orogeny (ca. 560–520 Ma) and is interpreted to be at least 600 km long in its E–W strike direction, with an approximate top-to-north minimum displacement of 60–100 km. The associated mylonite zone is most broadly developed in the footwall. The immediate hanging wall was only marginally involved in the mylonitization process, as can be demonstrated from the contrasting thorium signatures of mylonites derived from the upper amphibolite facies footwall and the granulite facies hanging wall protoliths. Thermal weakening cannot account for such an inverse deformation gradient, as syn-deformational P–T estimates for the Petermann Orogeny in the hanging wall and footwall from the same locality are very similar. The distribution of pseudotachylytes, which acted as preferred nucleation sites for shear deformation, also cannot provide an explanation, since these fault rocks are especially prevalent in the immediate hanging wall. The most likely reason for the inverted deformation gradient across the Woodroffe Thrust is water-assisted weakening due to the increased, but still limited, presence of aqueous fluids in the footwall. We also establish a qualitative increase in the abundance of fluids in the footwall along an approx. 60 km long section in the direction of thrusting, together with a slight decrease in the temperature of mylonitization (ca. 100 °C). These changes in ambient conditions are accompanied by a 6-fold decrease in thickness (from ca. 600 to 100 m) of the Woodroffe Thrust mylonitic zone.

Style APA, Harvard, Vancouver, ISO itp.

Camacho, A., I. McDougall, R. Armstrong i J. Braun. "Evidence for shear heating, Musgrave Block, central Australia". Journal of Structural Geology 23, nr 6-7 (czerwiec 2001): 1007–13. http://dx.doi.org/10.1016/s0191-8141(00)00172-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Austin, James, Dean Hillan, Phil Schmidt i Clive Foss. "Understanding magnetism in the Giles Complex, Musgrave Block, SA". Preview 2014, nr 171 (sierpień 2014): 41–44. http://dx.doi.org/10.1071/pvv2014n171p41.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Calandro, Domenic, i Stephen Hore. "Target Exploration Initiative South Australia (TEiSA) – Musgrave Block uncovered". ASEG Extended Abstracts 2001, nr 1 (grudzień 2001): 1–5. http://dx.doi.org/10.1071/aseg2001ab014.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

CAMACHO ( alfredo.camacho@anu.edu., A., W. COMPSTON, M. McCULLOCH i I. McDOUGALL. "Timing and exhumation of eclogite facies shear zones, Musgrave Block, central Australia". Journal of Metamorphic Geology 15, nr 6 (listopad 1997): 735–51. http://dx.doi.org/10.1111/j.1525-1314.1997.00053.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Camacho, A., B. Simons i P. W. Schmidt. "Geological and palaeomagnetic significance of the Kulgera Dyke Swarm, Musgrave Block, NT, Australia". Geophysical Journal International 107, nr 1 (październik 1991): 37–45. http://dx.doi.org/10.1111/j.1365-246x.1991.tb01154.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lambeck, K., i G. Burgess. "Deep crustal structure of the Musgrave Block, central Australia: Results from teleseismic travel‐time anomalies". Australian Journal of Earth Sciences 39, nr 1 (luty 1992): 1–19. http://dx.doi.org/10.1080/08120099208727996.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hawemann, Friedrich, Neil S. Mancktelow, Sebastian Wex, Alfredo Camacho i Giorgio Pennacchioni. "Pseudotachylyte as field evidence for lower-crustal earthquakes during the intracontinental Petermann Orogeny (Musgrave Block, Central Australia)". Solid Earth 9, nr 3 (9.05.2018): 629–48. http://dx.doi.org/10.5194/se-9-629-2018.

Pełny tekst źródła

Streszczenie:

Abstract. Geophysical evidence for lower continental crustal earthquakes in almost all collisional orogens is in conflict with the widely accepted notion that rocks, under high grade conditions, should flow rather than fracture. Pseudotachylytes are remnants of frictional melts generated during seismic slip and can therefore be used as an indicator of former seismogenic fault zones. The Fregon Subdomain in Central Australia was deformed under dry sub-eclogitic conditions of 600–700 °C and 1.0–1.2 GPa during the intracontinental Petermann Orogeny (ca. 550 Ma) and contains abundant pseudotachylyte. These pseudotachylytes are commonly foliated, recrystallized, and cross-cut by other pseudotachylytes, reflecting repeated generation during ongoing ductile deformation. This interplay is interpreted as evidence for repeated seismic brittle failure and post- to inter-seismic creep under dry lower-crustal conditions. Thermodynamic modelling of the pseudotachylyte bulk composition gives the same PT conditions of shearing as in surrounding mylonites. We conclude that pseudotachylytes in the Fregon Subdomain are a direct analogue of current seismicity in dry lower continental crust.

Style APA, Harvard, Vancouver, ISO itp.

White, Clarke i Nelson. "SHRIMP U-Pb zircon dating of Grenville-age events in the western part of the Musgrave Block, central Australia". Journal of Metamorphic Geology 17, nr 5 (wrzesień 1999): 465–81. http://dx.doi.org/10.1046/j.1525-1314.1999.00211.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Musgrave Block (W.A.)"

Seat, Zoran. "Geology, petrology, mineral and whole-rock chemistry, stable and radiogenic isotope systematics and Ni-Cu-PGE mineralisation of the Nebo-Babel intrusion, West Musgrave, Western Australia". University of Western Australia. School of Earth and Geographical Sciences, 2008. http://theses.library.uwa.edu.au/adt-WU2008.0202.

Pełny tekst źródła

Streszczenie:

The Nebo-Babel Ni-Cu-platinum-group element (PGE) magmatic sulphide deposit, a world-class ore body, is hosted in low-MgO, tube-like (chonolithic) gabbronorite intrusion in the West Musgrave Block, Western Australia. The Nebo-Babel deposit is the first significant discovery of a nickel sulphide deposit associated with the ca. 1078 Ma Giles Complex, which is part of the Warakurna large igneous province (LIP), now making the Musgrave Block a prime target for nickel sulphide exploration. The Musgrave Block is a Mesoproterozoic, east-west trending, orogenic belt in central Australia consisting of amphibolite and granulite facies basement gneisses with predominantly igneous protoliths. The basement lithologies have been intruded by mafic-ultramafic and felsic rocks; multiply deformed and metamorphosed between 1600 Ma and 500 Ma. The Giles Complex, which is part of the Warakurna LIP, was emplaced at ca. 1078 Ma and consists of a suite of layered mafic-ultramafic intrusions, mafic and felsic dykes and temporally associated volcanic rocks and granites. The Giles Complex intrusions are interpreted to have crystallised at crustal depths between 15km and 30km and are generally undeformed and unmetamorphosed.

Style APA, Harvard, Vancouver, ISO itp.

Conor, Colin H. H. "The geology of the Eateringinna 1:100 000 sheet area, eastern Musgrave Block, South Australia /". Title page, contents and abstract only, 1987. http://web4.library.adelaide.edu.au/theses/09SM/09smc753.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Barrett, Rebecca G. "From Welfare to Work: the Precursors, Politics, and Policies of Wisconsin and Federal Work-Based Welfare Reform". The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1337001655.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Conor, Colin H. H. (Colin Hugh Holford). "The geology of the Eateringinna 1:100 000 sheet area, eastern Musgrave Block, South Australia". 1987. http://web4.library.adelaide.edu.au/theses/09SM/09smc753.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Musgrave Block (W.A.)"

Dobkowski, Jan. Zwierzycniec, albo, Świta Orfeusza: 28 linorytów do cyklu poetyckiego Guillaume'a Apollinarie'a : Warszawa, 2-17 października 1996. Kraków: C&K Studio, 1996.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Narkiewicz, Marek. Seria węglanowa dewonu i karbonu w południowej części bloku górnośląskiego =: Devonian and Carboniferous carbonate complex in the southern part of the Upper Silesian block. Warszawa: Państwowy Instytut Geologiczny, 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

J, Robinson Michael. An inter-market comparison of the cost of trading common stocks: The case of block trades in the U.S. and Canada : by Michael J. Robinson & Robert W. White. London, Canada: Western Business School, University of Western Ontario, 1992.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2031, Barney Vvlg. Barney:Walk Around the Block W/Barney. LYONS GROUP, 1999.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

*. 1" Cube Red Block W/ 3/8" Hole. Elsevier, 1995.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Geology of the western Musgrave Block, central Australia, with particular reference to the mafic-ultramafic Giles Complex. Canberra: Australian Govt. Pub. Service, 1996.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Musgrave Block (W.A.)"

Żyluk, Andrzej, Mirosław Adamski, Konrad Zwoliński i Tomasz Grzybowski. "Charakterystyka oraz rozwiązania technologiczne skrzydła samolotu F-16 BLOCK 52+". W Mechanika w Lotnictwie ML-XIX 2020, 319–26. Instytut Techniczny Wojsk Lotniczych, Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej, 2020. http://dx.doi.org/10.15632/ml2020/319-326.

Pełny tekst źródła

Streszczenie:

Celem artykułu jest identyfikacja istniejącego, dostępnego w literaturze modelu dynamiki lotu samolotu F-16. Identyfikacja ta oznacza pełne zrozumienie tego modelu, zastosowanych w nim uproszczeń, nałożonych na model ograniczeń oraz określenie charakterystyk aerodynamicznych samolotu. Przedstawiono rozwiązania technologiczne mające na celu uzyskanie maksymalnie wysokiej manewrowości przy jednocześnie niewielkiej masie oraz niskim koszcie jednostkowym produkcji tego samolotu.

Style APA, Harvard, Vancouver, ISO itp.

Kawanabe, K., Y. Okada, H. Iida i T. Nakamura. "Treatment of osteomyelitis by antibiotic-soaked porous A-W glass ceramic block". W Bioceramics, 87–90. Elsevier, 1997. http://dx.doi.org/10.1016/b978-008042692-1/50021-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Winnicott, Donald W. "On Influencing and Being Influenced". W The Collected Works of D. W. Winnicott, 109–14. Oxford University Press, 2016. http://dx.doi.org/10.1093/med:psych/9780190271343.003.0016.

Pełny tekst źródła

Streszczenie:

In this essay on influence, Winnicott recognizes that a great stumbling block in scientific inquiry into human affairs is the difficulty in recognizing the existence and importance of unconscious feelings. Only against a background of recognition of the unconscious as well as of the conscious in human nature, can one study human relationships with profit, especially the teacher–pupil relationship.

Style APA, Harvard, Vancouver, ISO itp.

MUKHERJEE, S., i P. GRIGULL. "THERMAL ANALYSIS OF W VII-AS LIMITER SYSTEM AND PRESENTATION OF A GRAPHITE-BLOCK CONCEPT". W Fusion Technology 1988, 748–53. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-444-87369-9.50120-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sahoo, Prasanta, Supriyo Roy i J. Paulo Davim. "Design and Selection of Chemically Deposited Ni-P-W Coatings for Optimum Tribological Behavior". W Surface Engineering Techniques and Applications, 45–72. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-5141-8.ch002.

Pełny tekst źródła

Streszczenie:

Chemically deposited nickel coatings possess superior tribological properties such as high hardness, good wear, and corrosion resistance. The quest for improved tribological performance has led to the design and selection of newer variants of these coatings. The present chapter deals with the development of Ni-P-W coating on mild steel substrate and the improvement of tribological characteristics through modification of the coating process parameters. Three coating process parameters, concentration of nickel source, concentration of reducing agent, and concentration of tungsten source along with the annealing temperature, are optimized for minimum friction and wear of the coating. Friction and wear tests are carried out in a multi-tribotester using block on roller configuration under dry conditions. Taguchi-based grey relational analysis is employed for the optimization of this multiple response problem using L27 orthogonal array. Analysis of variance shows that the concentration of nickel source, the interaction between nickel source concentration, and reducing agent concentration, and also the interaction between nickel source concentration and tungsten source concentration have significant influence in controlling the friction and wear behavior of chemically deposited Ni-P-W coating. It is observed that wear mechanism is a mild adhesive in nature. The structural morphology, composition, and phase structure of the coating are studied with the help of Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray analysis (EDX), and X-Ray Diffraction analysis (XRD), respectively.

Style APA, Harvard, Vancouver, ISO itp.

Kroczak, Hanna. "Od wyuczonej bezradności do uaktywnionej zaradności – determinanty aktywizowania i „przełamywania” syndromu kultury ubóstwa. Studium przypadku popegeerowskiej wsi Kubanki". W Więzi społeczne, sieci społeczne w perspektywie procesów inkluzji i wykluczenia społecznego. Wydawnictwo Uniwersytetu Łódzkiego, 2014. http://dx.doi.org/10.18778/7969-483-9.11.

Pełny tekst źródła

Streszczenie:

Within 50 years of socialist realism in Poland, Polish forms of a social subclass and the culture of poverty distinguishing it appeared and became established in the specific community of State- Owned Farms. In the face of the lack of data update for over 10 years, the achievements of Polish researchers in this field so far leave many intriguing questions unanswered. The most important questions became an inspiration to make in the year 2011 an analysis of the study of the case of Kubanki village in the Region of Western Pomerania. The data gathered in this research have made it possible to diagnose the lack of a widespread occurrence of many indicators of the complex syndrome of the culture of poverty in that community. The data show concrete factors, which could and can block the process of development of the discussed phenomenon in the practice of social life, as well as eliminate individual detailed characteristics of the syndrome of the culture of poverty. In research practice, different types of indirect evidence have led to direct association of certain conditions occurring in Kubanki and in the surroundings with improvement of the residents’ life situation. These circumstances are directly connected with a broadly understood human activity and its conditions. In the discourse on contemporary social policy, the aspect of activation of individuals increases in popularity. This activation is to be an important factor on the path of transition from welfare state to welfare society. Observations made during the research mentioned above are placed into the context based on these guidelines. In accordance with these observations, in the light of the concept of the culture of poverty, the “overcoming” of this syndrome in the community can be done thanks to a far-flung activation of its members. As a result, this can lead to the transition from the culture of poverty, dependence on welfare, and so-called acquired helplessness to the culture of self-reliance, independence, and resourcefulness. The goal of the text is depiction of inspirations (determinants) in the scope of activation of this process.

Style APA, Harvard, Vancouver, ISO itp.

Haigh, Thomas, Mark Priestley i Crispin Rope. "Imagining ENIAC". W Eniac in Action. The MIT Press, 2016. http://dx.doi.org/10.7551/mitpress/9780262033985.003.0002.

Pełny tekst źródła

Streszczenie:

Explores the origins of ENIAC, beginning with its two primary inventors John W. Mauchly and J. Presper Eckert. Examines ENIAC’s original 1942 and 1943 proposals, the process by which the machine was approved, and the initial assembly of a team to work on the project. Documents connections between ENIAC and earlier work on differential analyzers, including a machine constructed during the 1930s and a 1940 proposal by Irven Travis for the creation of a digital electronic version. Analysis focuses particularly the relationship between the problem for which ENIAC was commissioned, the computation of artillery trajectories, and the proposed design. It concludes with a description of early planning work to determine the basic capabilities of ENIAC’s accumulators, its standard building block.

Style APA, Harvard, Vancouver, ISO itp.

James, Simon. "The Plateau Zone East of G St". W The Roman Military Base at Dura-Europos, Syria. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198743569.003.0020.

Pełny tekst źródła

Streszczenie:

The N end of the city’s plateau zone E of G St, bounded by the N wadi, the river cliff, and the head of the inner wadi, comprising the remotest corner within the walls, also became part of the Roman military quarter. Here, as across the whole N part of the city, the stratigraphy is shallow, rarely deeper than a metre, with bedrock showing in places. Surface indications and magnetometry suggest that much of the region had been built up in pre-Roman times, although there may have been areas of open ground. The street grid had been substantially laid out here, especially H St which ran to the N city wall, but E of this line it seems partly to break down. In particular, in the nominal areas of projected block positions X1–X8, 10th St actually curved off-grid to the S, probably preserving the line of an early approach road to the N end of the Citadel before the stronghold was separated from the plateau by a great quarry and rebuilt. This far N region was presumably mostly residential before AD 165, except for two known sanctuaries beside H St: the so-called Dolicheneum in X7, and a temple of unknown dedication in X9. Under Roman rule it became dominated by insertion of the massive residence known as the ‘Palace of the dux ripae’, here referred to as the Roman Palace. Closures of both G and I Sts on the N side of 10th St, by the building of Roman structures across them, indicates that the zone N of this line became a military enclosure. This was accessible from the civil town only via an entrance on H St, and from the W part of the base area on the plateau, already enclosed by a boundary along the W side of G St, via a smaller entrance on the diverted line of ‘12th St’ at the N-most point of block E3. Within the re-entrant to the continuous base perimeter created by the G St and 10th St lines, more blocks appear to have been taken over by the military.

Style APA, Harvard, Vancouver, ISO itp.

James, Simon. "How Did the Base Work?" W The Roman Military Base at Dura-Europos, Syria. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198743569.003.0028.

Pełny tekst źródła

Streszczenie:

We now consider how the military base area operated, as a zone where a large number of people lived and worked on a routine basis. On one hand, to function it required the affordances of its internal communications, connections with the civil town, and access to roads, river, and lands beyond the walls; on the other, there was a need for surveillance and control of activities within the base, and of movements across its boundary. The most obvious part of the base boundary (Plate XXII) is the substantial mud brick wall ploughed across four blocks from the city defences just S of Tower 21, and blocking Wall, A, C, and D Sts, with a gate established at B St. How the S boundary was defined E of D St has always remained an issue. If it was necessary to build a wall at the W end, why was this not simply continued all the way to, e.g., the S end of the Citadel? Across blocks F7 and F5 it seems that the boundary of the military zone simply comprised party walls between military and civilian-occupied structures. The same was true within block B2, by the Citadel, although the boundary probably comprised building frontages along Lower Main St. On the plateau, as the camp wall may have been a subsequent local enhancement, except where the amphitheatre formed part of it, the boundary may generally have comprised the rear walls of military-held houses lining the S side of 8th St—probably all properties from the city wall to H St. The course of the boundary along the W side of the inner wadi is unknown, but the base is suggested, as along 8th St, to have incorporated at least all properties lining the S side of the Wadi Ascent Road, if not encompassing all blocks on the wadi slope—in which case the boundary here may rather have comprised property frontages on K St. The base area was split by site topography into two major zones, the flat plateau, and the N branch of the inner wadi around the Citadel. Each was further subdivided.

Style APA, Harvard, Vancouver, ISO itp.

Kosuge, Koji. "Non-Stoichiometric Compounds Derived From Extended Defects". W Chemistry of Non-stoichiometric Compounds. Oxford University Press, 1994. http://dx.doi.org/10.1093/oso/9780198555551.003.0005.

Pełny tekst źródła

Streszczenie:

The non-stoichiometric compounds that we describe in this chapter are closely correlated with the classical non-stoichiometric compounds derived from point defects discussed in Chapter 1. For the past twenty years precise structural analyses on complex binary and ternary compounds have been carried out using X-ray and neutron diffraction techniques. Moreover, owing to the striking development of the resolving power of the electron microscope crystal structures can be seen directly as structure images. As a result, it has been shown that most complex structures can be derived by introducing extended defects regularly into a mother structure. A typical example is a ‘shear structure’, which is derived by introducing planar defects of anion rows into the mother lattice. A ‘block structure’ is derived by introducing two groups of planar defects. ‘Vernier structures’, ‘micro-twin structures’, ‘intergrowth structures’, and ‘adaptive structures’ are also described in detail in this chapter. At the beginning of 1950, Professor A. Magnéli’s group in Sweden started a systematic study of the crystal structures of the oxides of transition metal elements such as Ti, V, Mo, and W, mainly by X-ray diffraction techniques. As a result, they confirmed the existence of the homologous compounds expressed by VnO2n–1; TinO2n–1 etc. (n = 2, 3, 4, . . .) and also predicted that the crystal structure of these compounds could be derived from a mother structure, ‘rutile’. Figure 2.1 shows the X-ray powder diffraction patterns (CuKα) of compounds TiOx between Ti2O3 (x = 1.5) and TiO2 (x = 2.0).3 This clearly indicates the convergence of the diffraction patterns to that of TiO2 (rutile) with increasing x, which is why the Magnéli school predicted the mother structure to be rutile. This prediction was verified by the structure determinations of Ti5O95 and VnO2n–1.6 These compounds are called Magnéli phases after the main investigator, and similar compounds have been discovered.

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Musgrave Block (W.A.)"

Rihan, Rana Adnan, i Khaled M. Khan. "Using Block Cipher for Confidentiality of Images in Cloud-Based Systems". W 2016 IEEE 4th International Conference on Future Internet of Things and Cloud Workshops (FiCloudW). IEEE, 2016. http://dx.doi.org/10.1109/w-ficloud.2016.22.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Skrzynik, T. "Analysis of Reservoir Parameters of Main Dolomite (Ca2) in Gorzów Block (W Poland)". W 75th EAGE Conference and Exhibition incorporating SPE EUROPEC 2013. Netherlands: EAGE Publications BV, 2013. http://dx.doi.org/10.3997/2214-4609.20131091.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hiç, Özlen, i Ayşen Hiç Gencer. "Anti-Keynesian Views: Fiscal and Monetary Guidelines". W International Conference on Eurasian Economies. Eurasian Economists Association, 2014. http://dx.doi.org/10.36880/c05.00849.

Pełny tekst źródła

Streszczenie:

In this article, we will cover the main anti-Keynesian views and macroeconomic systems that arose in the post Keynes period as well as their fiscal and monetary policy guidelines. As is known, the early Classical economists introduced a macroeconomic system based on the Quantity Theory and Say’s Law resulting in automatic full-employment equilibrium; and finally after 1929-1934 Great World Depression, the Keynesian System was introduced as a “revolution” (Keynesian Revolution) in theory and practice. As a result of the Keynesian policies implemented, European countries and the United States not only got over the Great World Depression but also in the years following the World War II, they have observed a fast and stable growth for a long time. Moreover, cyclical fluctuations have been controlled to a great extent. Even so, at the stage when the Keynesian System was introduced, anti-Keynesian views and macroeconomic systems were immediately introduced. Intense academic discussions between advocates of these views and the Keynesian economists have continued up until today. Meanwhile, many economists such as J.R. Hicks, R.F. Harrod, N. Kaldor, M. Kalesci, A.W. Philips, A. Hansen, P.A. Samuelson, E. Domar, J. Tobin, R. Solow, A.M. Okun, W. Helier, G. Ackler, F. Modigliani, and R. Musgrave and many others have developed and defended the Keynesian System from different aspects. We can characterize significant anti-Keynesian views and macroeconomic systems as the “Counter-Revolution”.

Style APA, Harvard, Vancouver, ISO itp.

Ozbey, Zeynep. "BLOCK ROTATIONS ON VERTICAL AND HORIZONTAL AXIS IN THE W ANATOLIAN EXTENSIONAL PROVINCE, TURKEY: PALAEOMAGNETIC EVIDENCE". W SGEM2011 11th International Multidisciplinary Scientific GeoConference and EXPO. Stef92 Technology, 2011. http://dx.doi.org/10.5593/sgem2011/s01.102.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Resca, Davide, i Francesco Scappaviva. "A minature 70 W quasi-MMIC PA block suitable for highly integrated X-band pulsed SSPA schemes". W 2016 11th European Microwave Integrated Circuits Conference (EuMIC). IEEE, 2016. http://dx.doi.org/10.1109/eumic.2016.7777531.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jing, Jiaqiang, Zhongyuan Guan, Jiang Meng i Yuan Xu. "Properties and Transportation of the Produced Fluid in KD18 Viscous Oil Block, Shengli Oilfield". W 2006 International Pipeline Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/ipc2006-10118.

Pełny tekst źródła

Streszczenie:

The alumina adsorption, acidity, rheology, image analysis and other related methods are used to characterize the produced fluid in KD18 viscous oil block in Shengli Oilfield. The fluid generally contains 68–75% water cut and about 50–60% bound water. The apparent viscosities of the water-in-oil (W/O) emulsions, varying from 7000mPa.s to 12000mPa.s at 50 °C and the shear rate of 51s−1, are 4–6 times higher than those of the corresponding dehydrated oil. The fluid is transported by a 259-mm-ID, 23.8-km-length pipeline with 2 intermediate heat-pump stations because of its high viscosity, which is followed by high energy and associated gas consumptions. A viscosity reduction method of the W/O emulsion to be inverted into oil-in-water or other composite emulsions by directly adding a sort of viscosity reducer VRKD18 is given in this paper. Composed of two types of nonionic surfactants, VRKD18 is developed by a series of preparations. VRKD18 reduces the apparent viscosity of the W/O emulsion to less than 100 mPa.s at 50 °C and 51 s−1, being more than 98% of apparent viscosity reduction. The reason for this significant viscosity reduction is that VRKD18 changes the outer and inner phase structures of the W/O emulsion, the modes of inner friction, and the drop-drop interaction. A field test for the fluid treated with VRKD18 is performed through the production pipeline. VRKD18 solution is only injected into the fluid by a metering pump at the head heat and pump station, while the other fluids along the pipeline which they are pumped into is not treated. In this article, the inlet temperature of the pipeline is about 50–57°C. The inlet and outlet flow rates are approximately 1200m3/d and 2600m3/d respectively. When the concentration of VRKD18 in the fluid is 300mg/kg, the friction loss along the whole pipeline will be reduced from 1.397MPa to 0.566MPa, i.e. 59.5% of drag reduction. Based on our observation and numerical simulation, such drag reduction is due to the apparent viscosity reduction of the transporting fluid, the wettability improvement on the pipeline inner wall and partial isolation of the viscous oil by the gathered gas at the pipeline top.

Style APA, Harvard, Vancouver, ISO itp.

Satpathy, Sudhir, Sanu Mathew, Vikram Suresh, Vinodh Gopal, James Guilford, Mark Anders, Himanshu Kaul, Amit Agarwal, Steven Hsu i Kam Krisnnamurthy. "34.4Mbps 1.56Tbps/W DEFLATE Decompression Accelerator Featuring Block-Adaptive Huffman Decoder in 14nm Tri-Gate CMOS for IoT Platforms". W ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference (ESSCIRC). IEEE, 2018. http://dx.doi.org/10.1109/esscirc.2018.8494238.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kim, Sangjin, Juhyoung Lee, Dongseok Im i Hoi-Jun Yoo. "PNNPU: A 11.9 TOPS/W High-speed 3D Point Cloud-based Neural Network Processor with Block-based Point Processing for Regular DRAM Access". W 2021 Symposium on VLSI Circuits. IEEE, 2021. http://dx.doi.org/10.23919/vlsicircuits52068.2021.9492450.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wachtmeister, Georg, i Horst W. Koehler. "Design Features of MAN B&W Medium Speed Diesel Engines Optimizing Life Cycle Costs". W ASME 2001 Internal Combustion Engine Division Spring Technical Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/ices2001-100.

Pełny tekst źródła

Streszczenie:

Abstract It is not only fuel and lube oil costs which determine life cycle costs of a diesel engine, but also maintenance costs and costs for replacements of wear components. All these costs are linked to the individual design of the engine and its capability to burn a variety of fuels, including low-priced heavy fuel oils. As an example, the paper describes several main components of MAN B&W medium-speed diesel engines (engine block, liner, piston) and how they contribute to lower life cycle costs by easier maintenance procedures, longer TBOs and longer life times. To achieve this is a challenging task for the engine manufacturer, since other strong market requirements such as reduced exhaust gas emissions or high power density have to be fulfilled simultaneously.

Style APA, Harvard, Vancouver, ISO itp.

Gunawan, Andrey, Alexander Limia, Jong Min Ha, Peter A. Kottke, Seung Woo Lee, Andrei G. Fedorov i Shannon K. Yee. "Techno-Economic Analysis of Dual-Stage Sodium Thermal Electrochemical Converter (Na-TEC) Power Block for Distributed CSP". W ASME 2018 12th International Conference on Energy Sustainability collocated with the ASME 2018 Power Conference and the ASME 2018 Nuclear Forum. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/es2018-7505.

Pełny tekst źródła

Streszczenie:

A sodium thermal electrochemical converter (Na-TEC) converts heat directly into electricity without moving parts by isothermal expansion of ions through beta”-alumina solid-electrolyte (BASE). These generators are most similar to thermoelectric generators; however, they are considerably more efficient than the best performing thermoelectric materials. While these heat engines have been considered for CSP applications, literature review found that the efficiency of single-stage Na-TEC could readily achieve 20% even though ideal cycle efficiencies predict above 45% efficiency at elevated temperatures. Thermal parasitic loss has been identified to be responsible for the largest drop in the efficiency. Our recent study shows that staging helps to improve thermal management of the Na-TEC, due to the lower average temperature of the device, which can reduce the thermal parasitic loss. We demonstrate that dual-stage device can improve the efficiency by up to 8% over the best performing single-stage device. We are currently designing and developing a modular dual-stage Na-TEC power block with target efficiency of 33%. We emphasize modularity because this power block can be potentially deployed for both small-scale dish solar, which is appropriate for distributed residential scale (2–3 kWe), and large-scale heliostats and parabolic trough CSP, which is appropriate for centralized industrial scale. A fundamental cost-scaling relationship for this technology was developed based on this design. System variables and component manufacturing methods with material selection for processes were established. The current off-the-shelf component costs indicated an overnight capital cost of $2,044/kWe. The costs of BASE, manufacturing, and electrode preparation have driven the overall price of the module. The paper demonstrates $/W design optimization and cost scaling analysis to reduce the system capital $/W metric below $ 1,500/kWe, with the goal being to achieve the cost target of <900/kWe set by Department of Energy’s Sun Shot Initiative.

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Musgrave Block (W.A.)"

Sniezek, Frank M. Performance Oriented Packaging Report for Charge, Demolition Block, 1/4 Pound, (TNT) w/Priming Adapters M1A4. Fort Belvoir, VA: Defense Technical Information Center, listopad 1992. http://dx.doi.org/10.21236/ada259096.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sniezek, Frank M. Performance Oriented Packaging Report for Charge, Demolition Block, 1 Pound or 1/2 Pound (TNT) w/Priming Adapters M1A4. Fort Belvoir, VA: Defense Technical Information Center, listopad 1992. http://dx.doi.org/10.21236/ada258492.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chapman, Ray, Phu Luong, Sung-Chan Kim i Earl Hayter. Development of three-dimensional wetting and drying algorithm for the Geophysical Scale Transport Multi-Block Hydrodynamic Sediment and Water Quality Transport Modeling System (GSMB). Engineer Research and Development Center (U.S.), lipiec 2021. http://dx.doi.org/10.21079/11681/41085.

Pełny tekst źródła

Streszczenie:

The Environmental Laboratory (EL) and the Coastal and Hydraulics Laboratory (CHL) have jointly completed a number of large-scale hydrodynamic, sediment and water quality transport studies. EL and CHL have successfully executed these studies utilizing the Geophysical Scale Transport Modeling System (GSMB). The model framework of GSMB is composed of multiple process models as shown in Figure 1. Figure 1 shows that the United States Army Corps of Engineers (USACE) accepted wave, hydrodynamic, sediment and water quality transport models are directly and indirectly linked within the GSMB framework. The components of GSMB are the two-dimensional (2D) deep-water wave action model (WAM) (Komen et al. 1994, Jensen et al. 2012), data from meteorological model (MET) (e.g., Saha et al. 2010 - http://journals.ametsoc.org/doi/pdf/10.1175/2010BAMS3001.1), shallow water wave models (STWAVE) (Smith et al. 1999), Coastal Modeling System wave (CMS-WAVE) (Lin et al. 2008), the large-scale, unstructured two-dimensional Advanced Circulation (2D ADCIRC) hydrodynamic model (http://www.adcirc.org), and the regional scale models, Curvilinear Hydrodynamics in three dimensions-Multi-Block (CH3D-MB) (Luong and Chapman 2009), which is the multi-block (MB) version of Curvilinear Hydrodynamics in three-dimensions-Waterways Experiments Station (CH3D-WES) (Chapman et al. 1996, Chapman et al. 2009), MB CH3D-SEDZLJ sediment transport model (Hayter et al. 2012), and CE-QUAL Management - ICM water quality model (Bunch et al. 2003, Cerco and Cole 1994). Task 1 of the DOER project, “Modeling Transport in Wetting/Drying and Vegetated Regions,” is to implement and test three-dimensional (3D) wetting and drying (W/D) within GSMB. This technical note describes the methods and results of Task 1. The original W/D routines were restricted to a single vertical layer or depth-averaged simulations. In order to retain the required 3D or multi-layer capability of MB-CH3D, a multi-block version with variable block layers was developed (Chapman and Luong 2009). This approach requires a combination of grid decomposition, MB, and Message Passing Interface (MPI) communication (Snir et al. 1998). The MB single layer W/D has demonstrated itself as an effective tool in hyper-tide environments, such as Cook Inlet, Alaska (Hayter et al. 2012). The code modifications, implementation, and testing of a fully 3D W/D are described in the following sections of this technical note.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!