Gotowa bibliografia na temat „Multiaxial”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Multiaxial”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Multiaxial"
Kosaka, Rui, Fumio Ogawa, Takamoto Itoh i Masao Sakane. "Creep Damage Evaluation using Uniaxial Miniature Specimens for Multiaxially Damaged Components". MATEC Web of Conferences 300 (2019): 07003. http://dx.doi.org/10.1051/matecconf/201930007003.
Pełny tekst źródłaWang, C. H., i M. W. Brown. "Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue—Part 1: Theories". Journal of Engineering Materials and Technology 118, nr 3 (1.07.1996): 367–70. http://dx.doi.org/10.1115/1.2806821.
Pełny tekst źródłaOzdemir, Huseyin, i Kadir Bilisik. "Off-Axis Flexural Properties of Multiaxis 3D Basalt Fiber Preform/Cementitious Concretes: Experimental Study". Materials 14, nr 11 (21.05.2021): 2713. http://dx.doi.org/10.3390/ma14112713.
Pełny tekst źródłaLu, Fucong, Kun Zhang, Yuhang Hou i Zhiwen Wu. "Investigation on Temperature-Dependent Multiaxial Ratchetting of Polycarbonate by a Novel Experimental Method". Advances in Materials Science and Engineering 2022 (13.05.2022): 1–9. http://dx.doi.org/10.1155/2022/6577569.
Pełny tekst źródłaWang, Lei, Wu Zhen Li i Tian Zhong Sui. "Review of Multiaxial Fatigue Life Prediction Technology under Complex Loading". Advanced Materials Research 118-120 (czerwiec 2010): 283–88. http://dx.doi.org/10.4028/www.scientific.net/amr.118-120.283.
Pełny tekst źródłaShirafuji, Nakao, Kenji Shimomizuki, Masao Sakane i Masateru Ohnami. "Tension-Torsion Multiaxial Low Cycle Fatigue of Mar-M247LC Directionally Solidified Superalloy at Elevated Temperature". Journal of Engineering Materials and Technology 120, nr 1 (1.01.1998): 57–63. http://dx.doi.org/10.1115/1.2806838.
Pełny tekst źródłaBercelli, Lorenzo, Cédric Doudard i Sylvain Moyne. "Taking into account the non-proportional loading effect on high cycle fatigue life predictions obtained by invariant-based approaches". MATEC Web of Conferences 300 (2019): 12003. http://dx.doi.org/10.1051/matecconf/201930012003.
Pełny tekst źródłaZhao, Er Nian, i Wei Lian Qu. "Multiaxial Fatigue Life Prediction of Metallic Materials Based on Critical Plane Method under Non-Proportional Loading". Key Engineering Materials 730 (luty 2017): 516–20. http://dx.doi.org/10.4028/www.scientific.net/kem.730.516.
Pełny tekst źródłaStouffer, D. C., V. G. Ramaswamy, J. H. Laflen, R. H. Van Stone i R. Williams. "A Constitutive Model for the Inelastic Multiaxial Response of Rene’ 80 at 871C and 982C". Journal of Engineering Materials and Technology 112, nr 2 (1.04.1990): 241–46. http://dx.doi.org/10.1115/1.2903315.
Pełny tekst źródłaHiyoshi, Noritake, i Yoshihisa Iriyama. "Development of Tension-Torsion Multiaxial Creep Testing Apparatus for Heat Resisting Steel". MATEC Web of Conferences 159 (2018): 02015. http://dx.doi.org/10.1051/matecconf/201815902015.
Pełny tekst źródłaRozprawy doktorskie na temat "Multiaxial"
Liu, Mu-Hsin. "Multiaxial Fatigue Testing Machine". Ohio University / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1266241731.
Pełny tekst źródłaAlsayed, Mahmoud Ibrahim. "Rock behaviour under multiaxial compression". Thesis, University of Newcastle Upon Tyne, 1996. http://hdl.handle.net/10443/1565.
Pełny tekst źródłaTomlinson, Philip S. "Multiaxial deformation of AZ80 magnesium alloy". Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45362.
Pełny tekst źródłaTriantafillou, Thanasis C. (Thanasis Christos). "Multiaxial failure criteria for celluar materials". Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/14315.
Pełny tekst źródłaGonçalves, Camilla de Andrade. "Fadiga multiaxial policíclica : modelagem e simulação". reponame:Repositório Institucional da UnB, 2006. http://repositorio.unb.br/handle/10482/3638.
Pełny tekst źródłaSubmitted by Érika Rayanne Carvalho (carvalho.erika@ymail.com) on 2009-10-01T02:06:54Z No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5)
Approved for entry into archive by Marília Freitas(marilia@bce.unb.br) on 2010-02-12T23:02:17Z (GMT) No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5)
Made available in DSpace on 2010-02-12T23:02:17Z (GMT). No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5) Previous issue date: 2006-09-13
O objetivo deste trabalho é o estudo de critérios de resistência à fadiga multiaxial de metais em regime de alto número de ciclos. Os modelos apresentados por vários autores propõem, como medidas principais, a contribuição das tensões normais e das tensões cisalhantes para a degradação por fadiga do componente, além dos parâmetros do material. A questão que se coloca no contexto de solicitações multiaxiais é: qual é a melhor medida para caracterizar a amplitude de tensões cisalhantes e como incorporar o efeito das tensões normais? O estudo desenvolve então, uma análise destas questões relacionadas à modelagem de um critério de resistência à fadiga. Tensões normais trativas contribuem de forma maléfica para a degradação por fadiga por agirem no processo de abertura de microtrincas; quase a totalidade dos modelos de fadiga multiaxial considera a tensão hidrostática como medida das tensões normais atuantes na solicitação à fadiga. Sabe-se que esta é basicamente uma média das tensões normais e propõe-se aqui a substituição desta, pela máxima tensão principal. A aplicação da proposta a um conjunto grande de resultados experimentais disponíveis na literatura confirmou a hipótese de que a pior situação, que corresponde à existência de uma micro-trinca ortogonalmente orientada à máxima tensão principal, deve ser considerada e fornece uma previsão de resistência à fadiga mais conservativa e portanto, a favor da segurança. Quanto às tensões cisalhantes, primeiro apresentam-se as propostas de alguns autores, destacando-se dentre elas a abordagem do envelope elíptico e do envelope prismático. As duas aproximações fornecem as mesmas boas previsões de resistência à fadiga para dados experimentais de carregamentos senoidais com ciclos de mesma freqüência. Avança-se a análise para carregamentos mais gerais cujas trajetórias se distanciam da forma de um elipsóide e verifica-se de maneira inédita que, para uma ampla faixa de histórias de carregamento, as medidas de amplitude de tensões cisalhantes obtidas pelo máximo envelope prismático são equivalentes às medidas correspondentes obtidas pelo mínimo envelope elíptico. Tal verificação foi comprovada considerando-se trajetórias com ciclos senoidais assíncronos proporcionais e fora de fase, e ciclos não senoidais selecionadas a partir de resultados experimentais relativos a situações limites de resistência à fadiga. ________________________________________________________________________________________ ABSTRACT
The aim of this work is to evaluate multiaxial high cycle fatigue criteria for metals. The models presented by many authors propose that the the normal and shear stresses are the main variables controlling the fatigue damage, as well as the materials parameters. In the multiaxial context, the fundamental question to be answered is: which is the best measure to characterize the shear stress amplitude and how the well known effect of the mean normal stresses can be incorporated in the modeling process? This work carries out an analysis of such issues! Tensile stresses reduce the fatigue strength of metals as they keep the crack faces opened. Almost the totally of the multiaxial fatigue models available in the literature considers the hydrostatic stress as a measure for the normal stresses acting upon the fatigue solicitation. The hydrostatic stress is basically an average of the normal stresses acting in three orthogonal planes passing through a material point. Here we claim that the worst situation in terms of fatigue solicitation corresponds to the existence of a micro-crack orthogonally oriented to the maximum principal stress. Therefore, the maximum principal stress rather than the hydrostatic stress should be considered as an appropriate measure of the mean normal stress effect on the fatigue solicitation. To validate this hypothesis available experimental data published in the literature were selected and compared with the estimates provided by a modified version of the Prismatic Hull criterion developed by Mamiya and Araujo. Concerning the shear stresses, some models which consider the Minimum Circunscribing Ellipsoid or the Maximum Prismatic Hull of the deviatoric stress path as an appropriate measure for the shear stress amplitude are presented. The analysis carried out considering different materials subjected to a broad range of loading paths involving sinusoidal loadings with distinct frequencies and non-harmonic loadings revealed the shear stress amplitudes measured by the prismatic hull are equivalent to the ones measured by the elliptic hull.
Phillips, Peter Louis. "Integrated Multiaxial Experimentation and Constitutive Modeling". University of Dayton / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1492598070791388.
Pełny tekst źródłaHausding, Jan. "Entwicklung einer Verfestigungseinrichtung an einer Multiaxial-Nähwirkmaschine". Master's thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2006. http://nbn-resolving.de/urn:nbn:de:swb:14-1161074776507-67779.
Pełny tekst źródłaThe additional stabilization of open grid warp knits provides a better exploitation of the reinforcing yarns. To realize such an additional stabilization, various possible methods have been examined and assessed. Three different types of stabilization installations have been developed by combining the most promising technologies (infrared radiation, combination of heat and pressure, roll coater) and binding agents (thermoplastics, liquid agents). These installations offer special fea-tures for different needs: production, laboratory and least expense
Cherif, Chokri, Jan Hausding, Ulrike Berger, Ayham Younes i Roland Kleicke. "Textile Betonbewehrungen auf Basis der Multiaxial-Kettenwirktechnik". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-77780.
Pełny tekst źródłaThis paper provides an overview on the results of textile concrete achieved in twelve years of research at the Institute of Textile Machinery and High Performance Material Technology (ITM) in the field of textile reinforcements for concrete based on the multiaxial stitch-bonding technology. During the early years the research focused on the development of the textile manufacturing process and the integration of additional functions in stitch-bonding machines. With the introduction of new fiber materials this was shifted towards the description of the material behavior of glass and carbon fibers under different load scenarios. Based on the results of this research, multiaxial multi-ply fabrics are available now as reinforcements for concrete, covering a broad range of applications. These fabrics can be produced with high quality and productivity and enable the practical usage of textile reinforced concrete
Lousberg, Henri Béatrice. "Chronic pain multiaxial assessment and behavioral mechanisms /". Maastricht : Maastricht : Universitaire Pers Maastricht ; University Library, Maastricht University [Host], 1994. http://arno.unimaas.nl/show.cgi?fid=6589.
Pełny tekst źródłaHallett, Joseph F. "Multiaxial strength and fatigue of rubber compounds". Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/6759.
Pełny tekst źródłaKsiążki na temat "Multiaxial"
Socie, Darrell. Multiaxial Fatigue. Warrendale, PA: SAE International, 1999. http://dx.doi.org/10.4271/r-234.
Pełny tekst źródłaMiller, KJ, i MW Brown, red. Multiaxial Fatigue. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1985. http://dx.doi.org/10.1520/stp853-eb.
Pełny tekst źródłaInternational Conference on Biaxial/Multiaxial Fatigue (4th 1994 Saint-Germain en Laye, France). Multiaxial fatigue and design. London: Mechanical Engineering, 1996.
Znajdź pełny tekst źródłaMcDowell, DL, i JR Ellis, red. Advances in Multiaxial Fatigue. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1993. http://dx.doi.org/10.1520/stp1191-eb.
Pełny tekst źródła1956-, McDowell David L., i Ellis Rod 1939-, red. Advances in multiaxial fatigue. Philadelphia, PA: ASTM, 1993.
Znajdź pełny tekst źródła1947-, Brown M. W., i Miller K. J, red. Biaxial and multiaxial fatigue. London: Mechanical Engineering, 1988.
Znajdź pełny tekst źródłaEwald, Macha, Będkowski W, Łagoda T i European Structural Integrity Society, red. Multiaxial fatigue and fracture. Kidlington, Oxford: Elsevier, 1999.
Znajdź pełny tekst źródłaJ, Miller K., Brown M. W. 1947-, ASTM Committee E-9 on Fatigue. i ASTM Committee E-24 on Fracture Testing., red. Multiaxial fatigue: A symposium. Philadelphia, Pa: American Society for Testing and Materials, 1985.
Znajdź pełny tekst źródłaInternational Conference on Biaxial/Multiaxial Fatigue (2nd 1985 University of Sheffield). Biaxial and multiaxial fatigue. London: Mechanical Engineering Publications, 1989.
Znajdź pełny tekst źródłaGooch, D. J., i I. M. How, red. Techniques for Multiaxial Creep Testing. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3415-3.
Pełny tekst źródłaCzęści książek na temat "Multiaxial"
Kurylo, Monica, i Edward Liebmann. "Multiaxial Assessment". W Encyclopedia of Clinical Neuropsychology, 2285–86. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-57111-9_2026.
Pełny tekst źródłaKurylo, Monica, i Trisha Hay. "Multiaxial Assessment". W Encyclopedia of Clinical Neuropsychology, 1671. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-0-387-79948-3_2026.
Pełny tekst źródłaKurylo, Monica, i Edward Liebmann. "Multiaxial Assessment". W Encyclopedia of Clinical Neuropsychology, 1–3. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56782-2_2026-2.
Pełny tekst źródłaBlétry, Marc, i Georges Cailletaud. "Multiaxial Fatigue". W Fatigue of Materials and Structures, 1–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118616994.ch1.
Pełny tekst źródłaMilella, Pietro Paolo. "Multiaxial Fatigue". W Fatigue and Corrosion in Metals, 477–520. Milano: Springer Milan, 2012. http://dx.doi.org/10.1007/978-88-470-2336-9_9.
Pełny tekst źródłaLexcellent, Christian. "Multiaxial PlasticityMultiaxial plasticity". W Linear and Non-linear Mechanical Behavior of Solid Materials, 91–116. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-55609-3_5.
Pełny tekst źródłaMunz, Dietrich, i Theo Fett. "Multiaxial Failure Criteria". W Ceramics, 167–202. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58407-7_10.
Pełny tekst źródłaCantwell, Dennis P., i Lorian Baker. "Multiaxial Diagnostic Approaches". W Diagnosis and Assessment in Autism, 111–22. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4899-0792-9_8.
Pełny tekst źródłaEllyin, Fernand. "Multiaxial experimental facilities". W Fatigue Damage, Crack Growth and Life Prediction, 179–204. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1509-1_5.
Pełny tekst źródłaBrown, M. W. "Multiaxial Fatigue Failure". W Advances in Fatigue Science and Technology, 339–61. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2277-8_14.
Pełny tekst źródłaStreszczenia konferencji na temat "Multiaxial"
Camarena, Ernesto, Anthony G. Quintana, Victoria Yim, Peter W. Grimmer, John P. Mersch, Jeff Smith, John Emery i Gustavo Castelluccio. "Multiaxial Loading of Threaded Fasteners". W AIAA Scitech 2019 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2019. http://dx.doi.org/10.2514/6.2019-2271.
Pełny tekst źródłaMousselmal, H. D., P. J. Cottinet, L. Quiquerez, B. Remaki i L. Petit. "A multiaxial piezoelectric energy harvester". W SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, redaktor Henry Sodano. SPIE, 2013. http://dx.doi.org/10.1117/12.2009621.
Pełny tekst źródłaMEZZICH, JUAN E., i MARIA ISABEL ZAPATA-VEGA. "MULTIAXIAL DIAGNOSIS OF SCHIZOPHRENIC PATIENTS". W IX World Congress of Psychiatry. WORLD SCIENTIFIC, 1994. http://dx.doi.org/10.1142/9789814440912_0095.
Pełny tekst źródłaWallner, Oswald, Josep M. Perdigues Armengol i Anders L. Karlsson. "Multiaxial single-mode beam combiner". W SPIE Astronomical Telescopes + Instrumentation, redaktor Wesley A. Traub. SPIE, 2004. http://dx.doi.org/10.1117/12.551072.
Pełny tekst źródłaJiang, Yanyao, Tianwen Zhao, Xiaogui Wang i Zengliang Gao. "Multiaxial Fatigue of 16MnR Steel". W ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93473.
Pełny tekst źródłaZhang, Cheng-cheng, Yuan Ren, Jing-yun Gao, Ying Li i Kun Yang. "Analysis of Multiaxial Fatigue Evaluation in Engine Components Using an Improved Multiaxial Fatigue Life Model". W ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-57128.
Pełny tekst źródłaConle, F. A. "Durability Analysis Under Complex Multiaxial Loading". W Passenger Car Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1987. http://dx.doi.org/10.4271/871969.
Pełny tekst źródłaWei, Haoyang, i Yongming Liu. "Energy-based multiaxial fatigue damage modelling". W 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2018. http://dx.doi.org/10.2514/6.2018-0646.
Pełny tekst źródłaKurath, Peter. "Multiaxial Fatigue Criteria for Spot Welds". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920668.
Pełny tekst źródłaHay, N. C. "Conditioned Spectral Analysis in Multiaxial Fatigue". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1997. http://dx.doi.org/10.4271/970707.
Pełny tekst źródłaRaporty organizacyjne na temat "Multiaxial"
Le, Jialiang, Joseph Labuz, Takaaki Koyanagi i Chen Hu. Probabilistic Failure Criterion of SiC/SiC Composites Under Multiaxial Loading. Office of Scientific and Technical Information (OSTI), marzec 2023. http://dx.doi.org/10.2172/1963092.
Pełny tekst źródłaBeaver, P. W. A Review of Multiaxial Fatigue and Fracture of Fibre-Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1987. http://dx.doi.org/10.21236/ada191990.
Pełny tekst źródłaKyriakides, S. Response and Crushing of Cellular Solids Under Uniaxial and Multiaxial Loadings. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 2004. http://dx.doi.org/10.21236/ada423997.
Pełny tekst źródłaLu, Wei-Yang. Small-Scale Multiaxial Deformation Experiments on Solder for High-Fidelity Model Development. Office of Scientific and Technical Information (OSTI), grudzień 2002. http://dx.doi.org/10.2172/811190.
Pełny tekst źródłaRuggles, M. B., G. T. Yahr i R. L. Battiste. Static properties and multiaxial strength criterion for design of composite automotive structures. Office of Scientific and Technical Information (OSTI), listopad 1998. http://dx.doi.org/10.2172/290934.
Pełny tekst źródłaKhan, Akhtar S. Dynamic and Quasi-Static Multiaxial Response of Ceramics and Constitutive/Damage Modeling. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2001. http://dx.doi.org/10.21236/ada391958.
Pełny tekst źródłaPeterson, P. D., D. J. Idar, R. Rabie, C. S. Fugard, W. King, G. A. Buntain i N. B. Crane. Quasi-static multiaxial testing of PBX 9501: Creep effects on Estane molecular weight. Office of Scientific and Technical Information (OSTI), luty 1999. http://dx.doi.org/10.2172/334296.
Pełny tekst źródłaRiveros, Guillermo, Hussam Mahmoud i Santiago Lopez. Multiaxial fatigue strength of structural bolts under combined cyclic axial and shear demands. Engineer Research and Development Center (U.S.), lipiec 2019. http://dx.doi.org/10.21079/11681/33270.
Pełny tekst źródłaDing, J. L., K. C. Liu i C. R. Brinkman. Multiaxial deformation and life prediction model and experimental data for advanced silicon nitride ceramics. Office of Scientific and Technical Information (OSTI), czerwiec 1993. http://dx.doi.org/10.2172/10162954.
Pełny tekst źródłaKaneshige, Michael J., Md Fazle Rabbi, Michael J. Kaneshige, Robert Mach, Carlos A. Catzin i Calvin M. Stewart. Novel Method to Characterize and Model the Multiaxial Constitutive and Damage Response of Energetic Materials. Office of Scientific and Technical Information (OSTI), grudzień 2017. http://dx.doi.org/10.2172/1415222.
Pełny tekst źródła