Gotowa bibliografia na temat „Multi-Physics characterization”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Multi-Physics characterization”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Multi-Physics characterization"
Sivapurapu, Sridhar, Madhavan Swaminathan, Rui Chen, Chirag Mehta, Yi Zhou, Mohamed L. F. Bellaredj, Xiaotong Jia, Paul A. Kohl, Tsung-Ching Huang i Suresh K. Sitaraman. "Multi-Physics Modeling and Characterization of Components on Flexible Substrates". IEEE Transactions on Components, Packaging and Manufacturing Technology 9, nr 9 (wrzesień 2019): 1730–40. http://dx.doi.org/10.1109/tcpmt.2019.2931452.
Pełny tekst źródłaKim, Min-Ki, i Sang Won Yoon. "Thermal Impedance Characterization Using Optical Measurement Assisted by Multi-Physics Simulation for Multi-Chip SiC MOSFET Module". Micromachines 11, nr 12 (30.11.2020): 1060. http://dx.doi.org/10.3390/mi11121060.
Pełny tekst źródłaHaque, M. A., S. Kumar i M. T. Alam. "A MEMS-Based Platform for Multi-Physics Characterization of Ultra-Thin Freestanding Films". ECS Transactions 50, nr 12 (15.03.2013): 487–94. http://dx.doi.org/10.1149/05012.0487ecst.
Pełny tekst źródłaOppen, Dominic, Lisa M. Berger, Monika Gibis i Jochen Weiss. "Sensory Texture and Mastication Physics of Multi-Phase Meat Products". Applied Sciences 12, nr 21 (1.11.2022): 11076. http://dx.doi.org/10.3390/app122111076.
Pełny tekst źródłaUrban, K., M. Carminati, M. Descher, F. Edzards, D. Fink, C. Fiorini, M. Gugiatti i in. "Characterization measurements of the TRISTAN multi-pixel silicon drift detector". Journal of Instrumentation 17, nr 09 (1.09.2022): C09020. http://dx.doi.org/10.1088/1748-0221/17/09/c09020.
Pełny tekst źródłaLEE, Seunghun. "Combinatorial Science for Condensed Matter Physics and Metal Thin-film Study". Physics and High Technology 29, nr 7/8 (31.08.2020): 34–38. http://dx.doi.org/10.3938/phit.29.028.
Pełny tekst źródłaFavetti, R., P. Chiovaro, P. A. Di Maio i G. A. Spagnuolo. "Validation of Multi-Physics Integrated Procedure for the HCPB Breeding Blanket". International Journal of Computational Methods 17, nr 06 (14.02.2019): 1950009. http://dx.doi.org/10.1142/s0219876219500099.
Pełny tekst źródłaGao, Hai Lin. "Characterization of the Quarternary Wavelet Wraps with Multi-Scale Factor and Applications in Physics". Advanced Materials Research 461 (luty 2012): 656–60. http://dx.doi.org/10.4028/www.scientific.net/amr.461.656.
Pełny tekst źródłaMishra, Aashwin A., i Sharath S. Girimaji. "Intercomponent energy transfer in incompressible homogeneous turbulence: multi-point physics and amenability to one-point closures". Journal of Fluid Mechanics 731 (28.08.2013): 639–81. http://dx.doi.org/10.1017/jfm.2013.343.
Pełny tekst źródłaCutroneo, M., A. Mackova, L. Torrisi i V. Lavrentiev. "Laser ion implantation of Ge in SiO2 using a post-ion acceleration system". Laser and Particle Beams 35, nr 1 (22.12.2016): 72–80. http://dx.doi.org/10.1017/s0263034616000860.
Pełny tekst źródłaRozprawy doktorskie na temat "Multi-Physics characterization"
Gianfrancesco, Anthony Giacomo. "Multi-wavelength characterization of cadmium telluride solar cell: Development of Q-EBIC and NSOM measurement techniques". Digital WPI, 2013. https://digitalcommons.wpi.edu/etd-theses/213.
Pełny tekst źródłaOtaola, Franco. "Additive manufacturing, flow chemistry and multi-physics simulation applied to the development and optimization of structured reactors". Thesis, Compiègne, 2022. http://www.theses.fr/2022COMP2660.
Pełny tekst źródłaThe market pressure from a globalized world, in conjunction with a growing environmental conscience from society, pushes the chemical industry to develop cleaner and more efficient processes. Today, we should produce more, with reducing our environmental impact and at the same time lowering the costs. The Process Intensification (PI) appears as one solution for this challenge. PI is defined as “the development of new chemical routes and of innovative modular technologies that may lead to some breakthrough progress”. There exist several approaches for PI, from using innovative technologies such as microwaves or ultrasounds, to the transition from the chemistry in batch to flow chemistry. The passage from batch to continuous flow can bring several benefits, such as the production in demand, higher selectivity and better control of the process. The process improvement can be obtained by the miniaturization of the reactors, leading to small diffusion lengths that can improve heat and mass transfer properties. One type of miniaturized reactor are what is called “structured reactors”, with a certain degree of regularity inside their structure which leads to the reduction of hotspots, as well as better mixing among other benefits. Nevertheless, the fabrication of this type of reactors can be ratherchallenging. Additive Manufacturing (AM) has been a disrupting technology in several fields of engineering, including in the chemical industry. AM brings the possibility to fabricate miniaturized structured reactors with internal geometries that were not possible to fabricate. The benefit of this type of structures to the chemistry industry are very promising. Nevertheless, as AM enables a wide range of geometries and possibilities, it is necessary to better understand how the geometrical characteristics of the reactors affect their performance. This thesis aimed to improve the understanding of structured reactors, their advantages, disadvantages and future challenges to improve their performance. Consequently, the main objective was to develop a comprehensive methodology, from the conception, characterization and simulation of structured reactors up to their optimization. The work was divided into four different sections, i.e., the fabrication of the reactors (from the conception of the geometry, to their fabrication by AM), their hydrodynamic characterization by studying the Residence Time Distribution (RTD), the study of their performance for applications in heterogeneous catalysis (solid/liquid) and their simulation by Computational Fluid Dynamics (CFD). For the hydrodynamic characterization of the reactors, a complete automated system was developed to measure the RTD by a fluorescence technique, which had the main benefits of not being intrusive and also offered high frequency acquisition rates. The microstructured reactors were fabricated in a polymeric resin, which enabled the grafting of palladium for the use of the reactors for heterogeneous catalytic reactions. Finally, a first step for the development of a complete workflow for the CFD simulation and optimization of structured reactors was presented. Furthermore, a brief presentation of the different additive manufacturing techniques and the perspectives for future applications regarding the fabrication of microstructured reactors were also presented
Fantou, Alexandre. "Étude multi-physique et multi-échelle de la réaction d'hydratation du sulfate de calcium hémihydraté". Electronic Thesis or Diss., Lyon, INSA, 2023. http://www.theses.fr/2023ISAL0099.
Pełny tekst źródłaBecause of their setting ability, hydraulic binders are used for a wide variety of applications (e.g., construction materials, bone substitutes, ...). The setting reaction is always initiated by mixing one or several fine powders with an aqueous solution. The dissolution of the initial reactive powders results in the formation of a viscous paste, whose properties evolve with time to form a porous monolithic ceramic through the nucleation and precipitation of more stable phase(s). In this thesis, gypsum plaster CaSO4·2H2O obtained by the hydration reaction of calcium sulfate hemihydrate CaSO4·0,5H2O is studied under standard conditions (e.g., liquid/solid mass ratio, temperature and pressure), in order to develop multi-physic and multi-scale characterization techniques in-situ and ex-situ to monitor the evolution of:- the phase composition (rate of dissolution and precipitation) using calorimetric measurements, X-ray diffraction and Fourier-transform infrared spectrophotometry techniques;- the microstructure using scanning electron microscopy and X-ray microtomography;- the mechanical properties using ultrasonic propagation velocity measurement, shear and compressive dynamic mechanical analysis and compressive strength testing. This panel of techniques enabled to monitor and to correlate the various physical transitions occurring during the setting reaction, and thus to draw a global picture of the on-going phenomena
Mousselmal, Hadj Daoud. "Conception de dispositifs piézoélectriques de récupération d’énergie utilisant des structures multidirectionnelles et nanostructurés". Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0124.
Pełny tekst źródłaThis thesis work focuses on the development of new piezoelectric energy recovery systems from environmental mechanical vibration. The goal is to provide solutions to some strong constraints on the miniaturization of these systems, their integration in MEMS technology. The 2 major lines followed in this work are: (i) the nanostructuring by porosification silicon substrate. This method allows to create functionalized areas having local properties of density and lower rigidity than those of the silicon substrate. This allows on the one hand to improve the overall electromechanical coupling coefficient of the structure and, secondly, to maintain the resonant frequency of the operational mode in a low frequency range (< 1KHz) compatible with the spectrum of Many conventional vibratory sources. A series of finite element modeling of a type converter (beam with seismic mass) established the optimum dimensional parameters of nanostructured area. The effectiveness of this localized nanostructuring method was then evaluated experimentally on silicon membranes. It was observed a reduction of the resonance frequency of the fundamental mode, while minimizing losses by a judicious choice of the location and the width of the porous zone. (Ii) The development of recovery devices multidirectional sensitivity. These devices allow to recover energy regardless of the direction of the external load. They use 3 different eigenmodes bending each solicited by a particular component (ax, ay and az) vector solicitation characteristic acceleration. These devices based on a planar structure type double orthogonal beams with central seismic mass can be easily integrated and can be broken down to centimeter scale at the millimeter scale using in this case the MEMS technologies. A simple analytical model was first updated energy mechanisms that enable a constant amount of energy when the device is subjected to a bias vector in any direction. The optimization of the electromechanical coupling coefficient of each functional mode, and the adjustment of their resonance frequency were obtained using a finite element model. All these theoretical results has been experimentally validated using centimeter prototypes
Forssén, Clayton. "Characterization of Multi Plate Field Mill for Lunar Deployment". Thesis, Umeå universitet, Institutionen för fysik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-146672.
Pełny tekst źródłaUmeå Lunar Venture
Mesbahi, Tedjani. "Influence des stratégies de gestion d’une source hybride de véhicule électrique sur son dimensionnement et sa durée de vie par intégration d’un modèle multi-physique". Thesis, Ecole centrale de Lille, 2016. http://www.theses.fr/2016ECLI0004/document.
Pełny tekst źródłaThis thesis contributes to the improvement of hybrid embedded source performances supplies an electric vehicle. The studied solution is composed of Li-ion batteries and supercapacitors hybridization, with an aim to achieve improved performances in terms of weight and lifetime over traditional solutions. Our main goal is to take the best advantage of new energy management strategies of the hybrid embedded source and quantify obtained improvements. A multi-physic model including electric, thermal and aging behaviors is developed and integrated into the algorithm of energy management in order to evaluate the gradual degradation of storage components performances during driving cycles and implemented control strategy. New energy management strategies intended to act on the lifetime of hybrid embedded source have been evaluated. Their impact on the performances of the source in terms of weight, cost and lifetime has been quantified and clearly shows that it is possible to make better use of hybrid embedded source thanks to a good power sharing, thus opening the way to new approaches of energy management for these systems
Alarady, Mamdooh R. "Characterization of Image Quality between Multi-Slice Computed Tomography and Cone Beam Computed Tomography for Clinical Used Protocols in Radiation Therapy Treatment Planning". University of Toledo Health Science Campus / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=mco151080400269082.
Pełny tekst źródłaKorostyshevsky, Aaron. "Characterization of Radiation Damage in Multi-Junction Solar Cells Using Light-Biased Current Measurements". Connect to full text in OhioLINK ETD Center, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=toledo1224614484.
Pełny tekst źródłaTypescript. "Submitted as partial fulfillments of the requirements for the Master of Science Degree in Physics." "A thesis entitled"--at head of title. Bibliography: leaves 41-42.
Dronov, Roman. "Multi-component protein films by layer-by-layer : assembly and electron transfer". Phd thesis, Universität Potsdam, 2007. http://opus.kobv.de/ubp/volltexte/2008/1728/.
Pełny tekst źródłaElektronentransferphänomene in Proteinen stellen den häufigsten Typ biochemischer Reaktionen dar. Sie spielen eine zentrale Rolle bei der Energieumwandlung in der Zelle und sind entscheidende Komponenten in der Atmung und Photosynthese. Diese komplexen Kaskaden biochemischer Reaktionen setzen sich aus einer Reihe von Proteinen und Proteinkomplexen zusammen, die den Energietransfer an verschiedene Formen chemischer Energie koppeln. Die große Effektivität und Selektivität des Signaltransfers in diesen natürlichen Redoxketten war Vorbild für die Entwicklung künstlicher Architekturen, die die wesentlichen Eigenschaften ihrer natürlichen Analoga nachahmen. Die Implementierung des direkten Elektronentransfers (DET) von Proteinen mit Elektroden war ein Durchbruch im Bereich der Bioelektronik. Sie lieferte einen einfachen und effizienten Weg für das Koppeln biologischer Erkennungsereignisse an einen Signalumwandler. Durch den DET können Redoxmediatoren vermieden und damit potentielle Grenzflächen und Nebenreaktionen reduziert werden. Ebenso wird damit die Kompatibilität für in vivo Bedingungen erhöht. Jedoch zeigen nur einige Hämproteine wie das Redoxprotein Cytochrom c (Cyt c) und blaue Kupferproteine einen effizienten DET auf verschiedenen Elektrodentypen. Bisherige Untersuchungen mit Cyt c konzentrierten sich hauptsächlich auf den heterogenen Elektronentransfer von Monoschichten dieses Proteins auf Gold. Ein wichtiger Fortschritt war die Herstellung von Cyt c Multischichten durch die elektrostatische Layer-by-Layer-Technik. Die einfache Herstellung, die Stabilität sowie die kontrollierbaren Permeationseigenschaften von Polyelektrolyt-Multischichten machte sie besonders attraktiv für elektroanalytische Anwendungen. So gelang es auch zum ersten Mal vollständig elektroaktive Multischichten aus Cyt c und Polyanilinsulfonsäure zu präparieren. Dieser Ansatz wurde hier erweitert, um eine analytische Signalkette auf der Basis von Multischichten aus Cyt c und Xanthinoxidase zu entwerfen. Das System bedarf keinen externen Mediator, es hängt jedoch von der in situ Generierung eines vermittelnden Radikals ab und erlaubt daher einen Signaltransfer von Hypoxanthin über ein substratumwandelndes Enzym und Cyt c zur Elektrode. Eine andere Art von Signalketten basiert auf der Assemblierung von Proteinen in Komplexen auf Elektroden in solcher Art und Weise, daß ein direkter Protein-Protein-Elektronentransfer möglich wird. Dieser Ansatz benötigt keinen Redoxmediator in Analogie zu Beispielen aus dem biologischen Signaltransfer. Zu diesem Zweck werden Cyt c und das Enzym Bilirubinoxidase mit einem selbst-assemblierenden Polyelektrolyten auf einer Goldelektrode koimmobilisiert. Obwohl diese zwei Proteine keine natürlichen Reaktionspartner sind, unterstützt die Protein-Architektur einen Elektronentransfer von der Elektrode über mehrere Proteinschichten zu molekularem Sauerstoff und ergibt einen signifikanten katalytischen Reduktionsstrom. Schließlich wird eine neue Strategie beschrieben für eine Selbstassemblierung von Proteinen ohne zusätzlichen Polyelektrolyten - am Beispiel der Kombination von Cyt c mit Sulfitoxidase. Es stellte sich heraus, daß die elektrostatische Wechselwirkung zwischen diesen zwei Proteinen mit ziemlich weit voneinander entfernt liegenden pI-Werten während des Assemblierungsprozesses durch einen Puffer mit geringer Ionenstärke ausreicht um die beiden Biomoleküle nach dem Layer-by-Layer-Prinzip auf einer Elektrode abzuscheiden. Es wird erwartet, daß das entwickelte Konzept von Multiprotein-Assemblaten auf Elektroden weitere Fortschritte bei dem Entwurf von Multischichten und sogar noch komplexeren biomimetischen Signalkaskaden anregen wird und dabei der Vorteil der direkten Kommunikation zwischen Proteinen genutzt wird.
Marcault, Emmanuel. "Contribution à l'intégration d'un indicateur de vieillissement lié à l'état mécanique de composants électroniques de puissance". Phd thesis, INSA de Toulouse, 2012. http://tel.archives-ouvertes.fr/tel-00728764.
Pełny tekst źródłaKsiążki na temat "Multi-Physics characterization"
Kringos, Niki. Multi-Scale Modeling and Characterization of Infrastructure Materials: Proceedings of the International RILEM Symposium Stockholm, June 2013. Dordrecht: Springer Netherlands, 2013.
Znajdź pełny tekst źródłaAltenbach, Holm. Generalized Continua as Models for Materials: With Multi-scale Effects or Under Multi-field Actions. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
Znajdź pełny tekst źródłaZeinolebadi, Ahmad. In-situ Small-Angle X-ray Scattering Investigation of Transient Nanostructure of Multi-phase Polymer Materials Under Mechanical Deformation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
Znajdź pełny tekst źródłaKringos, Niki, David Frost i Björn Birgisson. Multi-Scale Modeling and Characterization of Infrastructure Materials. Springer, 2013.
Znajdź pełny tekst źródłaKringos, Niki, David Frost, Björn Birgisson i Linbing Wang. Multi-Scale Modeling and Characterization of Infrastructure Materials: Proceedings of the International RILEM Symposium Stockholm, June 2013. Ingramcontent, 2015.
Znajdź pełny tekst źródłaKringos, Niki, David Frost, Björn Birgisson i Linbing Wang. Multi-Scale Modeling and Characterization of Infrastructure Materials: Proceedings of the International RILEM Symposium Stockholm, June 2013. Springer, 2013.
Znajdź pełny tekst źródłaZeinolebadi, Ahmad. In-situ Small-Angle X-ray Scattering Investigation of Transient Nanostructure of Multi-phase Polymer Materials Under Mechanical Deformation. Springer, 2013.
Znajdź pełny tekst źródłaZeinolebadi, Ahmad. In-situ Small-Angle X-ray Scattering Investigation of Transient Nanostructure of Multi-phase Polymer Materials Under Mechanical Deformation. Springer, 2016.
Znajdź pełny tekst źródłaCzęści książek na temat "Multi-Physics characterization"
Shi, Zhen-ming, Chen-xi Zhao, Qing-zhao Zhang i Jing Song. "Numerical Characterization of Basalt Platform Slope Under Rainfall Condition". W Proceedings of GeoShanghai 2018 International Conference: Multi-physics Processes in Soil Mechanics and Advances in Geotechnical Testing, 307–14. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0095-0_35.
Pełny tekst źródłaBhushan, Bharat. "Multi-scale Tribological Characterization". W Biological and Medical Physics, Biomedical Engineering, 91–136. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-15901-5_5.
Pełny tekst źródłaBernard, Cindy, Angela Digulescu, Alexandre Girard i Cornel Ioana. "Multi-lag Phase Diagram Analysis for Transient Signal Characterization". W Springer Proceedings in Physics, 39–63. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29922-8_3.
Pełny tekst źródłaKovaleva, M. G., Y. N. Tyurin, V. M. Beresnev, M. S. Prozorova, M. Y. Arseenko, V. V. Sirota i I. A. Pavlenko. "Deposition and Characterization of Nanocomposition Cr3C2-TaC-NiCr Coating by Multi-Chamber Detonation Sprayer". W Springer Proceedings in Physics, 3–6. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-18543-9_1.
Pełny tekst źródłaNardone, Marco. "Photovoltaic device modeling: a multi-scale, multi-physics approach". W Advanced Characterization of Thin Film Solar Cells, 103–34. Institution of Engineering and Technology, 2020. http://dx.doi.org/10.1049/pbpo166e_ch5.
Pełny tekst źródłaA. Buot, Felix. "Perspective Chapter: On Entanglement Measures – Discrete Phase Space and Inverter-Chain Link Viewpoint". W Quantum Entanglement in High Energy Physics [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.1002232.
Pełny tekst źródłaStreszczenia konferencji na temat "Multi-Physics characterization"
"Chapter 12, Multi-physics modelling and characterization". W EuroSimE 2005. Proceedings of the 6th International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005. IEEE, 2005. http://dx.doi.org/10.1109/esime.2005.1502819.
Pełny tekst źródłaMacGregor, L., J. Tomlinson i R. Cooper. "Challenges and Pitfalls in Multi-Physics Integration for Reservoir Characterisation". W Seismic Driven Reservoir Characterization and Production Management. Netherlands: EAGE Publications BV, 2015. http://dx.doi.org/10.3997/2214-4609.201412300.
Pełny tekst źródłaPoh, Edith S. W., W. H. Zhu, X. R. Zhang, C. K. Wang, Anthony Y. S. Sun i H. B. Tan. "Lead-free solder material characterization for thermo-mechanical modeling". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525046.
Pełny tekst źródłaJansen, K. M. B., C. Qian, L. J. Ernst, C. Bohm, A. Kessler, H. Preu i M. Stecher. "Characterization and modeling of molding compound properties during cure". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525096.
Pełny tekst źródłaSaraswat, M. K., K. M. B. Jansen, M. D. Patel, L. J. Ernst, C. Bohm, A. Kessler, H. Preu i M. Stecher. "A characterization method for viscoelastic bulk modulus of molding compounds". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525098.
Pełny tekst źródłaKolluri, M., M. H. L. Thissen, J. P. M. Hoefnagels, J. A. W. van Dommelen i M. G. D. Geers. "Advanced miniature mixed mode bending setup for in-situ interface delamination characterization". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525090.
Pełny tekst źródłaQu, Jianmin, i Remi Dingreville. "Modeling and characterization of interfaces — from an atomistic description to a continuum approach". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525105.
Pełny tekst źródłaChang, Chih-Wei, Raanan Marants, Yuan Gao, Matthew Goette, Jessica E. Scholey, Jeffrey D. Bradley, Tian Liu, Jun Zhou, Atchar Sudhyadhom i Xiaofeng Yang. "Physics-informed multi-modal imaging-based material characterization for proton therapy". W Physics of Medical Imaging, redaktorzy Rebecca Fahrig, John M. Sabol i Lifeng Yu. SPIE, 2023. http://dx.doi.org/10.1117/12.2653667.
Pełny tekst źródłaSivapurapu, Sridhar, Chirag Mehta, Rui Chen, Xiaotong Jia, Yi Zhou, Mohamed Bellaredj, Paul A. Kohl, Tsung-Ching Huang, Suresh K. Sitaraman i Madhavan Swaminathan. "Multi-physics Modeling Characterization of Aerosol Jet Printed Transmission Lines". W 2018 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO). IEEE, 2018. http://dx.doi.org/10.1109/nemo.2018.8503509.
Pełny tekst źródłaShirangi, H., J. Auersperg, M. Koyuncu, H. Walter, W. H. Muller i B. Michel. "Characterization of dual-stage moisture diffusion, residual moisture content and hygroscopic swelling of epoxy molding compounds". W Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525009.
Pełny tekst źródłaRaporty organizacyjne na temat "Multi-Physics characterization"
Hou, Zhangshuan, Huiying Ren, Arun Veeramany, Larry Berg, Timothy Scheibe, Lai-Yung Leung, Alexander Sun, Roger Ghanem i Ty Ferre. Multi-scale Multi-physics Scientific Machine Learning for Water Cycle Extreme Events Identification, Labelling, Representation, and Characterization. Office of Scientific and Technical Information (OSTI), kwiecień 2021. http://dx.doi.org/10.2172/1769751.
Pełny tekst źródłaChapman i Toema. PR-266-09211-R01 Physics-Based Characterization of Lambda Sensor from Natural Gas Fueled Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), listopad 2012. http://dx.doi.org/10.55274/r0010022.
Pełny tekst źródła