Gotowe bibliografie tematyczne / Moving plate

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Moving plate”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Moving plate”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Moving plate"

Asadi, Hamed, Mohammad M. Aghdam i Mahmoud Shakeri. "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 228, nr 6 (26.07.2013): 953–69. http://dx.doi.org/10.1177/0954406213498033.

Pełny tekst źródła

Streszczenie:

Vibration analysis of axially moving functionally graded plates with internal line supports and temperature-dependent properties is investigated using harmonic differential quadrature method. The plate is subjected to static in-plane forces while out-of-plane loading is dynamic. Stability of an axially moving plate, traveling at a constant velocity between different supports and experiencing small transverse vibrations are considered. The series of internal rigid line supports parallel to the plate edges are considered together with various arbitrary combinations of boundary conditions. Material properties of the plate are assumed temperature-dependent which is a non-linear function of temperature and differ continuously through thickness according to a power-law distribution of the volume fractions of the plate constituents. Two types of micromechanical models, namely, the Voigt and Mori–Tanaka models are considered. Based on the classical plate theory, the governing equations are obtained for functionally graded plate using the Hamilton’s principle. In the frame of a general dynamic analysis, it is shown that the onset of instability takes place in the form of divergence. The plate may experience divergence or flutter instability at a super critical velocity. Results for dynamic analysis of isotropic and laminated plates are validated with available data in the existing literature, which show excellent agreement. Furthermore, some new results are presented for vibration analysis of functionally graded material plates to study effects of the location of line supports, material properties, volume fraction, temperature, loading, aspect ratio and speed.

Style APA, Harvard, Vancouver, ISO itp.

Ziegler, Peter A. "Plate tectonics, plate moving mechanisms and rifting". Tectonophysics 215, nr 1-2 (grudzień 1992): 9–34. http://dx.doi.org/10.1016/0040-1951(92)90072-e.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Magyari, E. "The moving plate thermometer". International Journal of Thermal Sciences 47, nr 11 (listopad 2008): 1436–41. http://dx.doi.org/10.1016/j.ijthermalsci.2007.12.010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Poojitha, K., V. Pooja, K. Sunitha i Dr Shruti Bhargava Choubey. "Moving Vehicle Registration Plate Detection". International Journal for Research in Applied Science and Engineering Technology 11, nr 1 (31.01.2023): 1789–92. http://dx.doi.org/10.22214/ijraset.2023.48784.

Pełny tekst źródła

Streszczenie:

Abstract: Generally, video surveillance system is used for security purpose as well as monitoring but recognition of moving object is a difficult part of video surveillance. Now a days, due to decreasing costs of high quality video surveillance systems, detection and tracking has becomeincreasingly in practical with the help of human activities. Nowadays, these kind of systems have been designed for various tasks, but the task of detecting illegally parked vehicles has been left largely to the human operators of these systems. The recognition of Registration platesof Indian vehicles is the most interesting and challenging part from past few years. It is noticedthat the registration plates of vehicles are in different shapes and sizes and colours in various countries. We need to identify the registration plate of moving vehicles using python librariessuch as OpenCV and Pytesseract. This project will enable us to identify the numbers and characters of a registration plate easily. The major technology which we use here is Edge detection technique.

Style APA, Harvard, Vancouver, ISO itp.

Vaidya, Prof Rajeshri, Vaishnavi Bisen, Manjusha Bansod, Ganesh Masurkar, Lokesh Telange i Piyush Shelke. "Moving Vehicle Registration Plate Detection". International Journal for Research in Applied Science and Engineering Technology 11, nr 4 (30.04.2023): 544–47. http://dx.doi.org/10.22214/ijraset.2023.50121.

Pełny tekst źródła

Streszczenie:

Abstract: License plate detection and E-challan system is an automated solution for traffic law enforcement that utilizes cameras, image processing algorithms, and software to detect license plates of vehicles and issue electronic challans for traffic rule violations. The system involves the installation of cameras at strategic locations on roads and highways, which capture images of passing vehicles. The E-challan system is an efficient and accurate system that reduces the workload of traffic police and enablesquick identification and penalization of traffic violators. E-Challan System is the online platform aimed at providing a wide rangeof support in managing and monitoring the traffic penalties, helping users regarding the problems they face in paying for their challan. The E-challan System is basically an interaction between Police and drivers easily through an online platform or an app. This project prototype describes how challan becomes easy for users through keeping it online. The online platform aims to reducethe paperwork, manual process and increase the convenience for the users

Style APA, Harvard, Vancouver, ISO itp.

Gorla, Rama Subba Reddy, K. Ramalingam i I. Adluri. "Magnetohydrodynamic Braking". Journal of Tribology 117, nr 4 (1.10.1995): 724–28. http://dx.doi.org/10.1115/1.2831543.

Pełny tekst źródła

Streszczenie:

A viscous and electrically conductive fluid separates two parallel plates. A magnetic field of intensity B0 is applied perpendicular to the plates. The top plate squeezes downward whereas the bottom plate moves laterally in its own plane. The nonsimilar problem is solved for the conditions of the top plate moving with constant velocity or constant force, while the bottom plate moves with a constant velocity. The effect of magnetic field on the braking action is discussed.

Style APA, Harvard, Vancouver, ISO itp.

Luong, Van Hai, Tan Ngoc Than Cao, J. N. Reddy, Kok Keng Ang, Minh Thi Tran i Jian Dai. "Static and Dynamic Analyses of Mindlin Plates Resting on Viscoelastic Foundation by Using Moving Element Method". International Journal of Structural Stability and Dynamics 18, nr 11 (22.10.2018): 1850131. http://dx.doi.org/10.1142/s0219455418501316.

Pełny tekst źródła

Streszczenie:

Presented herein is a novel computational approach using the moving element method (MEM) for simulating the dynamic response of Mindlin plate resting on a viscoelastic foundation and subjected to moving loads. The governing equations and the element mass, damping and stiffness matrices are formulated in a convected coordinate system in which the origin is attached to the point of the moving applied load. Thus, the method simply treats moving loads as ‘stationary’ at the nodes of the plate to avoid updating the locations of moving loads due to the change of the contact points on the plate. To verify the accuracy of the proposed computational approach, static and free vibration analyses of plates are investigated first. Next, the dynamic response of plate resting on a viscoelastic foundation subjected to a moving load is examined. A parametric study is performed to determine the effects of the load’s velocity, foundation damping and foundation stiffness on the dynamic response of a plate. Finally, the comparisons of the dynamic response of plates resting on viscoelastic foundation and subjected to moving vehicles with three models of load (single-wheel, single-axle and tandem-axle) are discussed.

Style APA, Harvard, Vancouver, ISO itp.

Luong, Van Hai, Tan Ngoc Than Cao, Qui X. Lieu i Xuan Vu Nguyen. "Moving Element Method for Dynamic Analyses of Functionally Graded Plates Resting on Pasternak Foundation Subjected to Moving Harmonic Load". International Journal of Structural Stability and Dynamics 20, nr 01 (25.10.2019): 2050003. http://dx.doi.org/10.1142/s0219455420500030.

Pełny tekst źródła

Streszczenie:

This paper presents the moving element method (MEM) for dynamic analyses of functionally graded (FG) plates resting on Pasternak foundation under moving harmonic load. The Mindlin plate theory is used to model the FG plates. Macroscopic material properties of FG plates are assumed to continuously vary across the thickness direction by a simple power-law distribution. The governing equation of the FG plate is formulated in a coordinate system which moves along with the applied load. In addition, the method simply treats the moving load as “stationary” at the discretized node of plate to completely eliminate the update procedure of force vector due to the change of contact point with elements. To verify the accuracy of the computational paradigm, static and free vibration analyses of FG plates are examined first. Dynamic analyses of FG plates subjected to a moving harmonic load are then conducted to investigate the effects of various parameters such as volume fraction exponent, Young’ modulus, load velocity, foundation damping coefficient and load acceleration/deceleration on dynamic responses of the plate.

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Man, i Ji-Xian Dong. "Transverse Vibration Analysis of Axially Moving Trapezoidal Plates". Journal of Nanoelectronics and Optoelectronics 16, nr 6 (1.06.2021): 978–86. http://dx.doi.org/10.1166/jno.2021.3049.

Pełny tekst źródła

Streszczenie:

Transverse vibration of axially moving trapezoidal plates is investigated. The differential equation of transverse vibration for a axially moving trapezoidal plate is established by D'Alembert principle. The original trapezoid region can be replaced by regular square region by the medium parameter method for the convenience of calculation. A generalized complex eigenvalue equation is derived by a discrete method (the differential quadrature method). The complex frequency curve of trapezoidal plate is obtained by calculating the eigenvalue equation. The change of the complex frequencies of the axially moving trapezoidal plates with the dimensionless axially moving speed is analyzed. The effects of the aspect ratio and the trapezoidal angle on instability type of the trapezoidal plate are discussed under different boundary conditions. The results of numerical analysis show that there are two main instability types of axially moving trapezoidal plate: divergence and flutter. The modal orders of the two types of instability are also different, which is related to the trapezoidal angle, aspect ratio and boundary condition of the trapezoidal plate.

Style APA, Harvard, Vancouver, ISO itp.

Wang, Yan, i Zhong Min Wang. "Stability Analyses of a Moving Rectangular Plate by the Element Free Galerkin Method". Advanced Materials Research 594-597 (listopad 2012): 2651–54. http://dx.doi.org/10.4028/www.scientific.net/amr.594-597.2651.

Pełny tekst źródła

Streszczenie:

The element-free Galerkin method is proposed to solve the stability of the moving rectangular plates. Utilizing the extended Hamilton’s principle for the elastic dynamics system, the variational expression of the moving thin plate are established. The dimensionless equations of motion of the moving thin plate are obtained by the element-free Galerkin method, and the complex eigenvalue equation is presented. Via numerical calculation, the variation relationship between the first three complex frequencies of the system and the moving speed is obtained. The effects of dimensionless moving speed on the stability and critical load of the thin plates are analyzed.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Moving plate"

Meszaros, Johan. "Large area zone plate exposure by fixed beam moving stage lithography". Thesis, KTH, Biomedicinsk fysik och röntgenfysik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-44548.

Pełny tekst źródła

Streszczenie:

In this diploma project the so-called fixed beam moving stage (FBMS) module in the Raith 150 electron beam lithography system has been evaluated for making large area zone plate exposures. The project goal, besides the evaluation of the module, has been to find an exposure recipe for exposing zone plates with diameter up to 500 μm. The zone plates fabricated with this method will be used for synchrotron and x-ray free electron laser applications. The thesis starts with a short introduction to zone plate properties and fabrication procedures. Then the work where FBMS exposed zone plates are compared with normal write field exposures of 75 μm diameter zone plates is described. The conclusion is that for these small diameters, major problems with wobbly zones occur for the FBMS patterns. However, for larger diameters the pattern typically looks better. The final result with large area exposures are excellent zone plate patterns with 500 μm diameter and 100 nm outermost zone width. The total exposure time was 2 h 15 min. This relatively short time indicate that it will be practically possible to use the Raith system for these large area exposures.

Style APA, Harvard, Vancouver, ISO itp.

Almurshedi, Ahmed. "Alternative plate deformation phenomenon for squeeze film levitation". Thesis, Brunel University, 2018. http://bura.brunel.ac.uk/handle/2438/17120.

Pełny tekst źródła

Streszczenie:

This thesis deals with a theoretical and an experimental exploration of squeeze film levitation (SFL) of light objects. The investigations aimed to find the important design parameters controlling this levitation mechanism and also to suggest an alternative way to implement SFL. The study, through computer modelling and experimental validation, focused on Poisson's contraction effect for generating SFL. A finite element model (ANSYS) was verified by experimental testing of five different plate designs. Each plate was subjected to a uniaxial plain stress by an arrangement of two hard piezoelectric actuators (PZT) bonded to the bottom of the plate and driven with DC or AC voltages. It was observed that pulsation of a dimple or crest shaped elastic deformation along the longitudinal axis in the central area of the plate was created because of Poisson's contraction. This Poisson's effect generated the squeeze-film between the plate and the levitated object. The separation distance between a floating lightweight object and the plate was analysed using computational fluid dynamics (ANSYS CFX) through creation of a modelling model for the air-film entrapped between the two interacting surfaces - a typical three-dimensional fluid-solid interaction system (FSI). Additionally, the levitation distance has been experimentally measured by a Laser Sensor. A satisfactory agreement has been found between model predictions and experimental results. Two levitation systems, one based on a horn transducer (Langevin type) and the other one in the form of a plain rectangular plate made of Aluminium and firmly fastened at both ends with a surface-mounted piezoelectric actuator, were compared in this thesis. Both devices were based on SFL mechanism. Evidently, the performances of both designs were greatly influenced by the design structure and in particular by the driving plate characteristics such as plate size and geometry as well as the driving boundary conditions. To this end, physical experiments were carried out and it was found that the device utilising horn-type transducer yields better levitation performance. Ultimately, the research explained the confusion between three approaches to non-contact levitation through literature review and also pointed out some essential parameters like piezoelectric actuators location, material of the driving structure, coupled-field between the actuators and the driving structure and the fluid-solid interface that was existed between the excited plate and the levitated object.

Style APA, Harvard, Vancouver, ISO itp.

Alqash, Sultan Ibrahim. "Numerical simulations of hydrodynamics of multiple water jets impinging over a horizontal moving plate". Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54783.

Pełny tekst źródła

Streszczenie:

The use and control of water jet impingement in the run-out table (ROT) are crucial in the steel plate cooling phase. Because of the complexity of the involved heat transfer process, the industries still mostly rely on a trial-and-error method for controlling the ROT cooling process. Although there are some experimental and numerical studies of the jet impingement cooling on ROT, the process is not fully understood. The analysis of hydrodynamics of water jet impingement is a key to understanding the process better. This aspect has received little attention in literature and it is the objective of this research. At first, Computational Fluid Dynamics (CFD) axisymmetric simulation of water jet was considered to explore wetting front propagation on stationary surface. In the case of a moving plate, there are different zones over the plate surface and appropriate three-dimensional geometry and model must be built in order to have a complete analysis and realistic outcomes. Nine cases (namely three distinct jet flow rates of 15, 22, and 30 L/min impinging on different plate speeds of 0.6, 1.0, and 1.5 m/s) were numerically investigated. Two main regions were carefully inspected; the propagations of water fronts in wetting zones and the interactions of wall jets in interaction zones. The realizable k-ε turbulent model (RKE) was utilized with the aid of a non-equilibrium wall function treatment and it showed good performance. The numerical results were validated with the experimental data obtained by other members of the UBC ROT group and showed reasonable agreement in terms of wetting front spreading and wall jets interaction type. Higher plate speeds and/or lower jet flow rates require dense mesh near the target surface to avoid water flow intermittency and capture the wetting front propagation as well as the hydraulic jump configuration. A huge air backflow was depicted when the plate was at the highest speed. Due to the plate movement, the symmetric wetting zone was distorted and became noncircular. According to the flow rate amount and the plate speed, different water wall jet interaction type and a corresponding bulge of water ahead of interaction zone (Int-Z) were captured.
Applied Science, Faculty of
Mechanical Engineering, Department of
Graduate

Style APA, Harvard, Vancouver, ISO itp.

Franco, Geoffrey. "Boiling heat transfer during cooling of a hot moving steel plate by multiple top jets". Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/7548.

Pełny tekst źródła

Streszczenie:

Experiments have been carried out on a pilot scale run-out table to study heat transfer during cooling of hot moving steel plates. Two lines of top water jets, each holding three nozzles are used in the study. Emphasis has been placed on studying the effect of nozzle stagger, jet line spacing and plate speed on the overall heat extraction rate. Tests are performed for 3 nozzle stagger arrangements (no-, half- and full-stagger) jet line spacings (25.4 cm, and 50.8 cm) and 2 plate speeds (0.35 m/s and 1.0 mIs) Results show that similar heat extraction rates are obtained regardless of nozzle stagger, for as long as the distance between nozzles and jet lines are held the same. However, cooling is more uniform when the nozzles are fully-staggered. No significant pooling occurred in between jet lines to affect cooling efficiency of the second jet line. More efficient heat extraction is attained when using closer-spaced jet lines and slower plate speeds. The heat extraction capability of an individual nozzle is generally determined by the surface temperature of the to-be-impinged and surrounding areas of the steel plate to be cooled. Nozzle arrangements of subsequent jet lines with respect to hot and cold regions developed by prior jet line impingement is crucial in maintaining uniform and efficient cooling of the hot plate or strip.

Style APA, Harvard, Vancouver, ISO itp.

Zheng, Dingyang. "Vibration and stability analysis of plate-type structures under moving loads by analytical and numerical methods /". Hong Kong : University of Hong Kong, 1999. http://sunzi.lib.hku.hk/hkuto/record.jsp?B20933320.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pragada, Siva Ramakrishna. "Minimizing the number of collectors to measure uniformity from center pivot systems". Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/903.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lobban, Stacey, i Hana Klimsova. "Demand Forecasting : A study at Alfa Laval in Lund". Thesis, Växjö University, School of Management and Economics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-2127.

Pełny tekst źródła

Streszczenie:

Accurate forecasting is a real problem at many companies and that includes Alfa Laval in Lund. Alfa Laval experiences problems forecasting for future raw material demand. Management is aware that the forecasting methods used today can be improved or replaced by others. A change could lead to better forecasting accuracy and lower errors which means less inventory, shorter cycle times and better customer service at lower costs.

The purpose of this study is to analyze Alfa Laval’s current forecasting models for demand of raw material used for pressed plates, and then determine if other models are better suited for taking into consideration trends and seasonal variation.

Style APA, Harvard, Vancouver, ISO itp.

Taylor, Gretel. "Locating: Place and the Moving Body". Thesis, full-text, 2008. https://vuir.vu.edu.au/2050/.

Pełny tekst źródła

Streszczenie:

This research project physically and theoretically investigates a relationship between body and place, via site-specific performance-making processes in diverse Australian sites. It encompasses the creation of two live performances and a video installation, the development of which are documented and elucidated in a written exegesis. The exegesis and associated performance processes explore the proposition that movement/ dance—as a spatial practice—can be a mode of locating, or an attempt to locate. ‘Locating’ implies an endless process that is always heading towards location, place, total presence—but may never arrive. Using practice-based, embodied research as its methodology, environmental information from the specific site is gathered via sensory perception tasks, some derived from Body Weather (a movement philosophy developed by Japanese dancer Min Tanaka), generating an improvisational exchange of perception and response. This ‘locating dance’ is the relationship between body and the place: it is simultaneously the seeking of relationship and the expression, enactment or illustration of it. In seeking location in relation to Australian sites from the perspective of a body that is white, the research also interrogates white Australian identity in relationship to this country, with the knowledge of the genocide and dispossession that its history entails. The work of theorists of place and space, as well as local historical and ecological sources, provide the framework for this series of excavations. Via traveling in Europe and to Aboriginal Land in the Northern Territory, insights develop into the cultural and corporeal residue of colonisation. Thus, the specific geographical site of each of the performance works acts also as a microcosm for, or reference point to, the broader site of contemporary Australia and the non-Aboriginal postcolonial experience of place. Representation of the body in performance is constructed in various ways to acknowledge the implications of its whiteness. The locating dances and performance works that comprise Locating: Place and the Moving Body engage in a multi-sensory listening to the country that aspires towards (white Australian) location—that elusive and longed-for ‘belonging’ or true ‘settlement’—yet they do not purport to have found, or even anticipate finding, an endpoint to this dance.

Style APA, Harvard, Vancouver, ISO itp.

Taylor, Gretel. "Locating place and the moving body /". full-text, 2008. http://eprints.vu.edu.au/2050/1/Gretel_Taylor.pdf.

Pełny tekst źródła

Streszczenie:

Style APA, Harvard, Vancouver, ISO itp.

Kossoff, Adam. "On Terra Firma : Space, Place and the Moving Image". Thesis, Royal College of Art, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503030.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Moving plate"

Stille, Darlene R. Plate tectonics: Earth's moving crust. Minneapolis, Minn: Compass Point Books, 2007.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Park, R. G. Geological structures and moving plates. Glasgow: Blackie, 1988.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Park, R. G. Geological structures and moving plates. Glasgow: Blackie, 1988.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Aylesworth, Thomas G., i Thomas G. Aylesworth. Moving continents: Our changing earth. Hillside, N.J: Enslow Publishers, 1990.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Misemer, Sarah M. Moving forward, looking back: Trains, literature, and the arts in the River Plate. Lewisburg: Bucknell University Press, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Moving forward, looking back: Trains, literature, and the arts in the River Plate. Lewisburg [Pa.]: Bucknell University Press, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

M, Morales Adolfo, i Dryden Flight Research Facility, red. The effects of excitation waveforms and shaker moving mass on the measured modal characteristics of a 2- by 5-foot aluminum plate. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1989.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

ill, Cox David 1933, red. Rattler's place. Ringwood, Vic., Australia: Penguin, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Squire, Vernon A., Roger J. Hosking, Arnold D. Kerr i Patricia J. Langhorne. Moving Loads on Ice Plates. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1649-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Park, R. G. Geological Structures and Moving Plates. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-017-1685-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Moving plate"

Park, R. G. "Plate movement and plate boundaries". W Geological Structures and Moving Plates, 54–72. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-017-1685-7_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hong, Keum-Shik, Li-Qun Chen, Phuong-Tung Pham i Xiao-Dong Yang. "Plate Model". W Control of Axially Moving Systems, 233–63. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-2915-0_7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chen, Jian Kang, Zhu Ping Huang i Shu Lin Bai. "Statistical Evolution of Microvoids in Particle-Filled Polymers under Plate Impact". W Fracture of Materials: Moving Forwards, 111–16. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-994-6.111.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Bao Lin, i Jie Cai Han. "A Nonhomogeneous Piezoelectric Material Plate with a Moving Crack". W Fracture and Damage Mechanics V, 85–88. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-413-8.85.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cao, Tan Ngoc Than, i Van Hai Luong. "Dynamic Responses of Composite Sandwich Plate Under Moving Load". W Lecture Notes in Civil Engineering, 795–804. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3303-5_72.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Okamura, M. "Dynamic response of a plate element of a steel girder caused by high-speed train". W Wave propagation Moving load – Vibration Reduction, 201–6. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-26.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Silva-Zea, Roberto, Romel Erazo-Bone, Fidel Chuchuca-Aguilar, Ricardo Gallegos, Kenny Escobar-Segovia i Ulises Gallegos Carrión. "Pseudoplastic Magnetorheological Fluid Flow on a Moving Horizontal Flat Plate". W Communications in Computer and Information Science, 56–69. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-42517-3_5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kim, Byeong Hwa, Min Seok Park, Heui-Gu Park, In Hwan Bae, Soo Jin Kim i Keum Soo Yeo. "Evaluating Axle Loads of Moving Vehicle Using Bridge Deck Plate Responses". W Dynamics of Civil Structures, Volume 4, 263–70. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9831-6_28.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vu Nguyen, Xuan, Van Hai Luong, Tan Ngoc Than Cao i Minh Thi Tran. "A Moving Element Method for Hydroelastic Response of a Floating Thin Plate Due to a Moving Load". W Lecture Notes in Civil Engineering, 189–98. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7603-0_20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cao, Tan Ngoc Than, i Van Hai Luong. "The Extension of Multi-layer Moving Plate Method (MMPM) for Analysis of Functionally Graded (FG) Sandwich Plate". W Lecture Notes in Civil Engineering, 917–28. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3303-5_84.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Moving plate"

Davis, B. R. "The moving plate capacitor paradox". W Unsolved problems of noise and fluctuations. AIP, 2000. http://dx.doi.org/10.1063/1.60033.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Partom, Y. "Long-Rod Moving-Plate Interaction". W Shock Compression of Condensed Matter - 2001: 12th APS Topical Conference. AIP, 2002. http://dx.doi.org/10.1063/1.1483773.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cheon, Y., i C. Lee. "License Plate Extraction for Moving Vehicles". W 2019 10th International Conference on Information, Intelligence, Systems and Applications (IISA). IEEE, 2019. http://dx.doi.org/10.1109/iisa.2019.8900778.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Xia, Xi, i Kamran Mohseni. "Lift on a Moving Flat Plate". W 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2013. http://dx.doi.org/10.2514/6.2013-838.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chen, Chao-Ho, Tsong-Yi Chen, Min-Tsung Wu, Tsann-Tay Tang i Wu-Chih Hu. "License Plate Recognition for Moving Vehicles Using a Moving Camera". W 2013 Ninth International Conference on Intelligent Information Hiding and Multimedia Signal Processing (IIH-MSP). IEEE, 2013. http://dx.doi.org/10.1109/iih-msp.2013.129.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jeong, K. H., G. M. Lee, T. W. Kim i J. I. Kim. "Hydroelastic vibration of a rectangular perforated plate with a simply supported boundary condition". W FLUID STRUCTURE INTERACTION/MOVING BOUNDARIES 2007. Southampton, UK: WIT Press, 2007. http://dx.doi.org/10.2495/fsi070151.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bagi, Shreyas S., C. H. Harshith, Santosh Tuppad, V. Dinu i R. Srikantaswamy. "Hybrid Algorithms for Moving Vehicle Plate Recognition System". W 2019 International Conference on Communication and Electronics Systems (ICCES). IEEE, 2019. http://dx.doi.org/10.1109/icces45898.2019.9002409.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bolaj, Namrata, i G. R. Padalkar. "The License Plate Identification of Fast Moving Vehicles". W 2017 International Conference on Computing, Communication, Control and Automation (ICCUBEA). IEEE, 2017. http://dx.doi.org/10.1109/iccubea.2017.8463655.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fujii, N., Y. Ito i T. Yoshihara. "Characteristics of moving magnet rotator over conducting plate". W INTERMAG Asia 2005: Digest of the IEEE International Magnetics Conference. IEEE, 2005. http://dx.doi.org/10.1109/intmag.2005.1463753.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rawat, Anurag Singh, Himanshu Devrani, Aman Yaduvanshi, Manvi Bohra, Indrajeet Kumar i Teekam Singh. "Surveillance System using Moving Vehicle Number Plate Recognition". W 2023 2nd International Conference on Edge Computing and Applications (ICECAA). IEEE, 2023. http://dx.doi.org/10.1109/icecaa58104.2023.10212426.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Moving plate"

S.J. Zweben, H. Zhang. Moving Divertor Plates in a Tokamak. Office of Scientific and Technical Information (OSTI), luty 2009. http://dx.doi.org/10.2172/950695.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zilberman, Mark. Methods to Test the “Dimming Effect” Produced by a Decrease in the Number of Photons Received from Receding Light Sources. Intellectual Archive, listopad 2020. http://dx.doi.org/10.32370/iaj.2437.

Pełny tekst źródła

Streszczenie:

The hypothetical “Dimming Effect” describes the change of the number of photons arriving from a moving light source per unit of time. In non-relativistic systems, the “Dimming effect” may occur due to the growing distance of light sources moving away from the receiver. This means that due to the growing distance, the photons continuously require more time to reach the receiver, which reduces the number of received photons per time unit compared to the number of emitted photons. Understandably, the proposed “Dimming effect” must be tested (confirmed or rejected) through observations. a. This article provides the formula for the calculation of “Dimming effect” values using the redshift parameter Z widely used in astronomy. b. The “Dimming effect” can possibly be detected utilizing the orbital movement of the Earth around the Sun. In accordance to the “Dimming effect”, observers on Earth will view 1.0001 more photons per time unit emitted by stars located near the ecliptic plane in the direction of the Earth orbiting the Sun. And, in contrast, observers will view only 0.9999 photons per time unit emitted by stars located near the ecliptic plane in the direction opposite to the Earth orbiting the Sun. Calculating precise measurements of the same stars within a 6-month period can possibly detect this difference. These changes in brightness are not only for specific stars, as the change in brightness takes place for all stars near the ecliptic in the direction of the Earth’s orbit around the Sun and in the opposite direction. c. The “Dimming effect” can possibly be detected in a physics laboratory using a moving light source (or mirror) and photon counters located in the direction of travel and in the opposite direction. d. In theory, Dilation of time can also be used for testing the existence of the “Dimming effect.” However, in experiments on Earth this effect appears in only the 14th digit after the decimal point and testing does not appear to be feasible. e. Why is it important to test the “Dimming effect?” If confirmed, it would allow astronomers to adjust values of "Standard Candles" used in astronomy. Since “Standard Candles” are critical in various cosmological models, the “Dimming effect” can correct models and/or reveal and support new models. If it is proved that the “Dimming effect” does not exist, it will mean that the number of photons arriving per unit of time does not depend on the speed of the light source and observer, which is not so apparent.

Style APA, Harvard, Vancouver, ISO itp.

Chao, A. W., i P. L. Morton. Physical Picture of the Electromagnetic Fields Between Two Infinite Conducting Plates Produced by a Point Charge Moving at the Speed of Light. Office of Scientific and Technical Information (OSTI), czerwiec 2015. http://dx.doi.org/10.2172/1185181.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Czajkowski, Jeffrey, i Tyler Leverty. Pandemic business interruption insurance coverage: Insights from WSB [Wisconsin School of Business] survey of insurance experts. Center for Insurance Policy and Research, maj 2020. http://dx.doi.org/10.52227/21112.2020.

Pełny tekst źródła

Streszczenie:

As businesses across the country (and the globe) have been forced to shut down to contain the spread of COVID-19, many have turned to their insurance policies for indemnification of their losses through business interruption (BI) insurance coverage. However, only about 40% of small businesses in the U.S. purchase BI coverage, and for many policies in place, pandemics are excluded or not explicitly covered. As a consequence of this significant coverage gap, there have been state and federal legislative proposals to either: i) retroactively provide coverage regardless of policy existing policy language; or ii) create a government-backed pandemic insurance program to provide BI coverage for pandemics moving forward. The Wisconsin School of Business (WSB) Insurance Experts Panel explores the extent to which insurance experts agree or disagree on major public policy issues affecting the insurance industry. We turned to the more than 50 insurance experts on the WSB Insurance Experts Panel to obtain their insights on this significant BI coverage issue.

Style APA, Harvard, Vancouver, ISO itp.

Loignon, Andy, Stephanie Wormington i George Hallenbeck. Reconsidering Myths about Teamwork Using CCL’s Framework on Team Effectiveness. Center for Creative Leadership, 2022. http://dx.doi.org/10.35613/ccl.2022.2052.

Pełny tekst źródła

Streszczenie:

In this paper we discuss several pervasive myths and misperceptions about teams and teamwork. We also introduce an evidence-based framework for moving beyond these myths and misperceptions. We shared several statements about teamwork to over 1,300 working adults. On average, across all the myths and respondents, 62% of respondents agreed with the myths we presented, 21% were uncertain, and only 17% disagree. This suggests that over 80% of respondents either endorsed, or expressed uncertainty about, myths relating to fundamental aspects of teamwork. Given the pervasiveness and lack of clarity surrounding myths about teams, we provide a research-grounded framework to better support holistic team effectiveness while also illuminating nuances about common myths. Together, we leverage this framework and our review of the teams literature to offer four broader “truths” that leaders and organizations can keep in mind to support effective teamwork. These include: Effective teams need intentional and systemic support. Teams need to be intentionally supported with ongoing development and an appreciation of their place in broader systems. Teams simultaneously reflect “wholes” and “parts.” Although teams come together to achieve shared and collective goals, they are, fundamentally, a combination of distinct individuals. Teams are dynamic. It is best to re-evaluate where a team is at any point in time rather than assume stability. Beliefs about teams and teamwork need to be (re)surfaced. Given the pervasiveness of myths and misconceptions about teamwork, there is value in openly discussing, questioning, and challenging assumptions about how teams can be the most effective.

Style APA, Harvard, Vancouver, ISO itp.

Løvschal, Mette, Havananda Ombashi, Marianne Høyem Andreasen, Bo Ejstrud, Renée Enevikd, Astrid Jensen, Mette Klingenberg, Søren Munch Kristiansen i Nina Helt Nielsen. The Protected Burial Mound ‘Store Vejlhøj’, Vinderup, Denmark: First Results. Det Kgl. Bibliotek, 2023. http://dx.doi.org/10.7146/aulsps-e.479.

Pełny tekst źródła

Streszczenie:

An archaeological excavation of the protected burial mound Store Vejlhøj in northwestern Denmark was carried out in October-November 2021. The excavation formed part of the ERC-funded research project called ANTHEA, focusing on the deep history of anthropogenic heathlands. It was conducted by Aarhus University in collaboration with Holstebro Museum and Moesgaard Museum. The aim was to test a new method of sampling pollen data from different construction stages in a burial mound and comparing them with pollen data from nearby lake sediments with a view to improving our understanding of prehistoric anthropogenic heathland dynamics. Prior to the excavation, soil cores were collected from two nearby peat sediments as well as six burial mounds (including Store Vejlhøj) within a 1 km range of Lake Skånsø, where previous pollen analyses had been carried out. Based on these preliminary corings, Store Vejlhøj was selected for further archaeological investigation. A dispensation for excavating the protected mound was granted by the Danish Palaces and Culture Agency. The excavation was based on a 5 m long trench through the barrow, moving from its foot inwards. The surface vegetation and 40 cm topsoil were removed by an excavator, after which the remainder of the trench was manually dug in horizontal layers. Observation conditions were good. The excavation revealed a series of well-defined barrow construction stages, as well as unusually wellpreserved turf structures. Only two archaeological finds could be related to the barrow, both of which were later than its initial construction: a secondary urn in the top layer, and the base of a second urn at the foot of the mound. The burial mound was constructed using a minimum of three shells, which could be observed in the trench profile. Turfs were most probably collected locally in a landscape dominated by grass pastures, where no previous turf cutting had taken place. A total of 34 soil samples were collected for paleoecological analyses (pollen, Non-Pollen Polymorphs (NPPs), macrofossils) and geoarchaeological analyses (micromorphology, bulk samples). Preliminary pollen and macrofossil results from the burial mound revealed poor preservation conditions, which prompted a trench extension of 0.5 m by 0.2 m to find better preservation conditions. This extension resulted in the collection of a single final macrofossil sample, although there was no identifiable change in the in-situ preservation conditions. The dating results of the mound have not yet been completed and will be included as appendix 4-6 in 2023.

Style APA, Harvard, Vancouver, ISO itp.

Delbridge, Victoria, Astrid Haas, Oliver Harman, Anthony Venables i Khady Dia-Sarr. Enhancing the financial position of cities: Evidence from Dakar. UNHabitat, marzec 2022. http://dx.doi.org/10.35489/bsg-igc-wp_2022/3.

Pełny tekst źródła

Streszczenie:

The city of Dakar is one of the only cities in Africa to come close to taking a municipal bond to market. The US$40 million bond, set to launch in 2014, was designed to fund a new market hall for informal traders in the city. The market would relocate more than 4,000 street vendors, with the aim of moving them from side streets into a safe and central place to sell their goods, with access to credit agencies and other market services. Development partners, including the Bill and Melinda Gates Foundation, the World Bank’s Public-Private Infrastructure Advisory Facility (PPIAF), Cities Alliance, and USAID, played a crucial role in making the bond terms viable – both in shouldering the financial burden of developing internal creditworthiness, and in providing expertise and guarantees to reduce the risk. Although the bond’s launch was ultimately stopped by national government decree, the process of preparing for the bond has greatly improved the financial management capabilities and creditworthiness of the city. As a result, Dakar’s bond journey is still paying dividends to the city today, with a number of successful concessional and commercial loans. The process also deepened the city’s connection with its residents – with small bond denominations, informal traders were one of the key investors. The motivation for the bond was in part due to the city’s lack of control over its financial resources. While the most recent decentralisation law amendment, Acte III de la Décentralisation of 2013, has seen many responsibilities devolved to the local level, finances to deliver on this new mandate have not followed. In fact, all revenue and expenditure for local governments in Senegal are processed at the national level, leaving little room or incentive for financial reform. Surprisingly, despite this, the law gives local governments relative independence in taking on debt. This meant that when Mayor Sall came into office with a vision for change, the only viable financing opportunity within the city of Dakar’s control was via the latter. This legislated independence is also the reason why the halting of the bond was so heavily contested. The city of Dakar provides an example of the importance of the political landscape in effecting any innovative reforms, as well as the need for the national government to buy-in to the fact that successful cities are in their interest as well. This is particularly critical in Dakar’s case, given the city’s finances are managed at the national level. Fortuitously, the national government is now beginning to focus on improving local revenues, primarily through property taxes, as well as better coordination amongst different stakeholders through a dedicated department and the ‘Local Fiscality Commissions’ described below.

Style APA, Harvard, Vancouver, ISO itp.

Golovko, Khrystyna. TRAVEL REPORT BY ALEKSANDER JANTA-POŁCZYNSKI «INTO THE USSR» (1932): FROG PERSPECTIVE. Ivan Franko National University of Lviv, marzec 2021. http://dx.doi.org/10.30970/vjo.2021.50.11091.

Pełny tekst źródła

Streszczenie:

The article analyzes a series of materials by Aleksander Janta-Polczynski «Into the USSR» from Soviet Russia during the in 1932, published on «Wiadomości Literackiе». The purpose of this article is explain the uniqueness of the reporter’s style and personality. We want to emphasize the role of Janta-Polczynski as the pioneer of reportage journalism. He was the first who worked professionally in this position in the full sense of this word. Analyzed the cycle of Alexander Janta-Polczynski from Russia, we can emphasize the scale of the reporter’s trip: in 1932 the journalist made the largest journalistic trip to the USSR. Janta visited the Eastern republics, which differed from the popular Moscow and Leningrad. Also, he saw the largest construction in the USSR at this time – which it bragged about russian newspapers – Magnitogorsk and Dneprostroy. For a better understanding are given the visual examples from reportorial texts. It should be noted that for Janta the main task of the reporter is to show what is seen and recorded: only facts and personal experience in communication. This cycle can safely be called a journey and social expedition. The main task for Janta the scene where the reportage takes place is to find proper characters and convince them of the importance of their story. These are the materials of a reporter – an eyewitness, not a researcher, a report from the scene, which pushes the reader to an independent conclusion. We explore that all the Janta-Polczynski texts are inextricably linked by looking into the «middle» of the process: the diversity of what is seen allows the journalist to look for differences and similarities, compare, look at the fundamental components, track changes and distinguish them. Special attention was paid to a low-angle shot in his materials. He describes how Soviet society lives, how factories work, how the system of educating a Soviet person, goes to the movies and exhibitions, communicates with ordinary citizens. Undoubtedly, all this is successfully complemented by the factual detail and uniqueness of the author’s style.

Style APA, Harvard, Vancouver, ISO itp.

Head Office, 65 Martin Place - Moving Day - Foyer on moving in day - January 1965. Reserve Bank of Australia, marzec 2021. http://dx.doi.org/10.47688/rba_archives_pn-003526.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Plant Protection and Quarantine: Helping U.S. Agriculture Thrive--Across the Country and Around the World, 2016 Annual Report. U.S. Department of Agriculture, Animal and Plant Health Inspection Service, marzec 2017. http://dx.doi.org/10.32747/2017.7207241.aphis.

Pełny tekst źródła

Streszczenie:

For Plant Protection and Quarantine (PPQ) and our partners, 2016 was a year of remarkable successes. Not only did we eradicate 10 fruit fly outbreaks, but we also achieved 4 years with zero detections of pink bollworm, moving us one step closer to eradicating this pest from all commercial cotton-growing areas of the continental United States. And when the U.S. corn industry faced the first-ever detection of bacterial leaf streak (Xanthomonas vasicular pv vasculorum), we devised a practical and scientific approach to manage the disease and protect valuable export markets. Our most significant domestic accomplishment this year, however, was achieving one of our agency’s top 10 goals: eliminating the European grapevine moth (EGVM) from the United States. On the world stage, PPQ helped U.S. agriculture thrive in the global market-place. We worked closely with our international trading partners to develop and promote science-based standards, helping to create a safe, fair, and predictable agricultural trade system that minimizes the spread of invasive plant pests and diseases. We reached critical plant health agreements and resolved plant health barriers to trade, which sustained and expanded U.S. export markets valued at more than $4 billion. And, we helped U.S. producers meet foreign market access requirements and certified the health of more than 650,000 exports, securing economic opportunities for U.S. products abroad. These successes underscore how PPQ is working every day to keep U.S. agriculture healthy and profitable.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!