Rozprawy doktorskie na temat „Modelling”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Modelling”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Singh, Peterson Lila Physics Faculty of Science UNSW. "Modelling secondary organic aerosol formation :from chemical mechanistic modelling to empirical modelling". Awarded by:University of New South Wales. Physics, 2007. http://handle.unsw.edu.au/1959.4/40466.
Pełny tekst źródłaRomanowska, Izabela Anna. "Modelling hominin dispersals with agent-based modelling". Thesis, University of Southampton, 2017. https://eprints.soton.ac.uk/420372/.
Pełny tekst źródłaGriesser, Martin Thomas. "The modelling of fabric behaviour for automated modelling". Thesis, University of Hull, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262413.
Pełny tekst źródłaTilgner, Hagen 1980. "Modelling splicing". Doctoral thesis, Universitat Pompeu Fabra, 2011. http://hdl.handle.net/10803/85056.
Pełny tekst źródłaSplicing of RNA molecules is the process, by which intervening sequences (“introns”) in the primary transcript are excised, and the remaining sequences (“exons”) are concatenated to form the mature RNA. Recent evidence shows that almost all spliced genes are affected by alternative splicing. Here, we define the minimal length of RNA oligomers that can sensibly be called splicing factor binding sites. Then, we explore the capacity of these oligomers to predict complete exon-intron structures. We highlight those oligomers that are most informative for this and show, that equal accuracy as in previous approaches can be achieved with less RNA oligomers. The observation, that this approach falls short of accurately predicting the entire exon-intron structure, led us to investigate determinants linked to co-transcriptional splicing. We show that nucleosomes are preferentially positioned on exons and hypothesize that they play a role in splicing decisions. We then introduce the “completed splicing index” and conclude that co-transcriptional splicing is very wide-spread in humans. Furthermore co-transcriptional splicing exhibits links to chromatin organization. In the light of these results, we go on to monitor chromatin changes on differentially included exons in pair-wise tissue comparisons. We find a variety of histone marks, but not all, showing significantly different behavior on up- and downregulated exons. The most prominently appearing marks are H3K9ac and two lysine 4 methylation states.
Spackman, Roger A. "Electrochemical modelling". Thesis, University of Oxford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.316899.
Pełny tekst źródłaMackie, Jo. "Situation modelling". Thesis, Lancaster University, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.527167.
Pełny tekst źródłaCox, Sander. "Dynamical modelling". Thesis, Uppsala universitet, Tillämpad matematik och statistik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-262477.
Pełny tekst źródłaGuruprasad, Kunchur. "Protein modelling". Thesis, Birkbeck (University of London), 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.283204.
Pełny tekst źródłaVaidya, A. M. "Ultrafiltration modelling". Thesis, University of Manchester, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.237688.
Pełny tekst źródłaDiamantopoulos, Panayiotis. "Biomedical modelling". Thesis, University of Sussex, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.391860.
Pełny tekst źródłaFinbow, Gerard Mark. "Modelling nanostructures". Thesis, University of Cambridge, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624252.
Pełny tekst źródłaAmmari-Allahyari, Mojtaba. "Modelling recursion". Thesis, University of Warwick, 2008. http://wrap.warwick.ac.uk/3602/.
Pełny tekst źródłaRoseburgh, David Stewart. "Epioptical modelling". Thesis, University of Edinburgh, 2006. http://hdl.handle.net/1842/14327.
Pełny tekst źródłaCole, Ian R. "Modelling CPV". Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/18050.
Pełny tekst źródłaHebeler, Felix. "Modelling topographic uncertainty : impacts on large scale : environmental modelling /". Zürich, 2008. http://opac.nebis.ch/cgi-bin/showAbstract.pl?sys=000253809.
Pełny tekst źródłaHeadey, Jonathan Mark. "Modelling of river corridors : modelling urban particulate transport processes". Thesis, University of Birmingham, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.289714.
Pełny tekst źródłaWang, Wang. "Empirical Investigations of Conceptual Modelling and the Modelling Process". Thesis, Lancaster University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.518147.
Pełny tekst źródłaKjellsdotter, Frida. "MBS-modelling of a heavy truck : Modelling and model validation". Thesis, KTH, Fordonsdynamik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-32076.
Pełny tekst źródłaStrathern, M. "Modelling Organisational Evolution and Change - a Complex Systems Modelling Perspective". Thesis, Cranfield University, 2008. http://hdl.handle.net/1826/3527.
Pełny tekst źródłaLu, Zhengxin. "Modelling geotechnical uncertainty using numerical modelling techniques : Kuldip Narbheshankar Modha". Thesis, University of Nottingham, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446386.
Pełny tekst źródłaMeng, Xuesong. "Modelling multi-scale problems in the transmission line modelling method". Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14461/.
Pełny tekst źródłaGebrehiwet, Yemane Fisseha. "Modelling agricultural input expenditure in a multi-market modelling framework". Thesis, University of Pretoria, 2010. http://hdl.handle.net/2263/25139.
Pełny tekst źródłaThesis (DCom)--University of Pretoria, 2011.
Agricultural Economics, Extension and Rural Development
unrestricted
Deshmukh, Pushkaraj M. "Modelling error estimation and adaptive modelling of functionally graded materials". Cincinnati, Ohio : University of Cincinnati, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1096036755.
Pełny tekst źródłaNilsson, Cecilia. "Modelling of Dynamically Loaded Shotcrete". Thesis, KTH, Betongbyggnad, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-36923.
Pełny tekst źródłaBrignoni, Jimmy. "Modelling transfer processes /". [S.l.] : [s.n.], 2009. http://www.ub.unibe.ch/content/bibliotheken_sammlungen/sondersammlungen/dissen_bestellformular/index_ger.html.
Pełny tekst źródłaLamberti, Giuseppe. "Modelling with heterogeneity". Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/309295.
Pełny tekst źródłaCuando se realiza un estudio científico, el análisis hace énfasis sobre las variables recogidas para responder a las preguntas que se quieren hallar durante el mismo estudio. Sin embargo en muchos análisis se suele recoger más variables, como por ejemplo variables socio demográfico: sexo, status social, edad. Estas variables son conocidas como variables de segmentación, ya que pueden ser útiles en la identificación de posibles fuentes de heterogeneidad. Analizar la heterogeneidad quiere decir realizar distintas análisis para distintos colectivos homogéneos definidos a partir de las variables de segmentación. Muchas veces, si hay algún conocimiento previo, esta heterogeneidad puede ser controlada mediante la definición de segmentos a priori. Sin embargo no siempre se dispone de conocimiento suficiente para definir a priori los grupos. Por otro lado muchas variables de segmentación podrían ser disponibles para analizar la heterogeneidad de acuerdo con un apropiado algoritmo. Un algoritmo desarrollado con este objetivo fue PATHMOX, propuesto por Gastón Sanchez en 2009. Esta técnica, utilizando particiones recursivas, produce un árbol de segmentación con distintos modelos asociados a cada nodo. Para cada nodo, PATHMOX busca entre todas las variables de segmentación aquella que produce una diferencia máxima entre los modelos de los nodos hijos. Tomando como punto de partida el trabajo de Gastón Sanchez esta tesis se propone: 1. Extender PATHMOX para identificar los constructos responsables de la diferencias. PATHMOX nos permite detectar distintos modelos en un data-set sin identificar grupos a priori. Sin embargo, PATHMOX es un criterio global. Pera identificar las distintas ecuaciones y coeficientes responsables de las particiones, introduciremos los test F-block y F-coefficient. 2. Extender PATHMOX para solucionar el problema de la invariancia. En el contexto del PLS-PM (Partial Least Squares Path Modeling), PATHMOX funciona fijando las relaciones causales entre las variables latentes y el objetivo es identificar modelos con coeficientes path lo más posible distintos sin poner ninguna restricción sobre el modelo de medida. Por lo tanto, cada vez que una diferencia significativa es identificada, y dos nodos hijos vienen definidos, las relaciones causales entre las variables latentes son las mismas en ambos modelos "hijos", pero la estimación de cada variable latente se recalcula y no podemos estar seguros de comparar el comportamiento de dos individuos distintos que pertenecen a dos nodos diferentes. Para resolver este problema propondremos un test de invariancia basado en la distribución X^2, donde el objetivo del test es verificar si los modelos de cada nodo terminales se puede considerar igual o no entre ellos. 3. Extender PATHMOX para superar la hipótesis paramétrica del F-test. Una crítica a PATHMOX, aplicadas en el contexto del PLS-PM, es que el algoritmo utiliza una prueba paramétrica, basada en la hipótesis de que los residuos tienen una distribución normal, para comparar dos modelos estructurales. Para superar este límite, extenderemos el test para comparar dos regresiones robustas LAD en el contexto del PLS. 4. La generalización del algoritmo PATHMOX a cualquier tipo de metodología. El algoritmo PATHMOX ha sido propuesto para analizar la heterogeneidad en el contexto PLS-PM. Sin embargo, este algoritmo se puede aplicar a muchos otros tipos de metodologías de acuerdo con un apropiado criterio de partición. Para generalizar PATHMOX consideraremos tres escenarios distintos: modelos de regresión (modelos OLS, LAD, GLM) y el análisis en componentes principales. 5. Implementar la metodología, utilizando el software R como librería específica.
Larsson, Johan. "Modelling a memory". Thesis, Linköping University, Department of Electrical Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1028.
Pełny tekst źródłaThe purpose of this master thesis is to describe the work behind the building of a scalable model of a memory designed at Zarlink Semiconductor AB. This model is to be part of a memory generator and used to extract timing parameters for all available memory sizes instead of simulating the layout, as layout simulation takes too much time.
The report starts with the basic theory of passive circuit elements that has to be considered in a model and what effect these elements have on functionality and robustness of the design. There’s also a short chapter on how to layout for optimisation towards high speed, minimal area or low power consumption.
After that, the work behind three different models of a memory is described. The models are a skeletal model, a mixed-mode model and a digital model. The skeletal model was the only one that could be finished and this model is then evaluated and compared to a simulation made on the original layout of the memory.
Included in the description of the mixed-mode and digital models are a description of how you characterise cells and how you include power information in digital simulation.
At the end there’s a short chapter on the future of modelmaking.
Björklund, Oscar. "Modelling of failure". Thesis, Linköping University, Department of Management and Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-11466.
Pełny tekst źródłaThis report is a review of some failure models today used for determine failure in thin sheets of high strength steels. Focus has been given on phenomenlogical models and only some simple simulations have been carried out. The phenomenlogical models that have been summarized here are of four different categories, namely stress based, strain based, combined stress and strain based and damaged models. However, the simulations have only been preformed for some of the models.
Meier, Stefanie. "Identifying Modelling Tasks". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-80629.
Pełny tekst źródłaOzkan, Erhun. "Stochastic Inventory Modelling". Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/3/12612097/index.pdf.
Pełny tekst źródłaBrännström, Åke. "Modelling animal populations". Doctoral thesis, Umeå universitet, Matematik och matematisk statistik, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-205.
Pełny tekst źródłaSprague, Daniel Alexander. "Modelling health behaviour". Thesis, University of Warwick, 2015. http://wrap.warwick.ac.uk/77458/.
Pełny tekst źródłaSheikh, Irfan. "Modelling power prices". Thesis, Imperial College London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.529355.
Pełny tekst źródłaYeung, William Wai-Hung. "Modelling stalled airfoils". Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/31120.
Pełny tekst źródłaApplied Science, Faculty of
Mechanical Engineering, Department of
Graduate
Lewis-Bowen, J. "Modelling grid architecture". Thesis, University College London (University of London), 2007. http://discovery.ucl.ac.uk/1445669/.
Pełny tekst źródłaMickael, Michel Edwar Khalil. "Modelling baroreceptors function". Thesis, Durham University, 2012. http://etheses.dur.ac.uk/3901/.
Pełny tekst źródłaRobbins, Lynda E. "Modelling cryptographic systems". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ31163.pdf.
Pełny tekst źródłaBredenberg, Johan. "Modelling biomolecular interactions /". Stockholm, 2003. http://diss.kib.ki.se/2003/91-7349-571-9.
Pełny tekst źródłaHutcheson, Kenneth Andrew. "Geomagnetic field modelling". Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.385503.
Pełny tekst źródłaLeith, Miguel Francis. "Modelling linguistic events". Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299691.
Pełny tekst źródłaMarchant, Ben. "Modelling cell invasion". Thesis, University of Oxford, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.365294.
Pełny tekst źródłaHöfer, Thomas. "Modelling Dictyostelium aggregation". Thesis, University of Oxford, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320227.
Pełny tekst źródłaHall, R. J. "Modelling fungicide resistance". Thesis, University of Cambridge, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.599864.
Pełny tekst źródłaBiswas, P. "Inclusive user modelling". Thesis, University of Cambridge, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.596672.
Pełny tekst źródłaTse, Jonathan. "Market microstructure modelling". Thesis, University of Oxford, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.540272.
Pełny tekst źródłaBennett, Donald John. "Semiconductor process modelling". Thesis, University of the West of Scotland, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259677.
Pełny tekst źródłaAxt, Konstantin. "Modelling pre-rRNA". Thesis, University of Edinburgh, 2013. http://hdl.handle.net/1842/7746.
Pełny tekst źródłaCrapper, Martin. "Fluid mud modelling". Thesis, University of Liverpool, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.318237.
Pełny tekst źródłaMorrell, Kevin. "Modelling employee turnover". Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/6794.
Pełny tekst źródłaTighe, Stephen Patrick. "Macroscopic dislocation modelling". Thesis, University of Oxford, 1992. http://ora.ox.ac.uk/objects/uuid:e4f00d59-71b0-43c0-b141-0bb7e6108fff.
Pełny tekst źródła