Rozprawy doktorskie na temat „Milling machinery”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Milling machinery”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Herman, Paul Andrew. "Improvement of surface finish quality in peripheral milling VIA precision compensation for cutter runout". Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/16696.
Pełny tekst źródłaLazoğlu, İsmail. "Analysis and optimization of milling force system for workpiece with complicated geometry". Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/16032.
Pełny tekst źródłaHekman, Keith Alan. "On-line identification of cutter runout in end milling processes". Diss., Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/16748.
Pełny tekst źródłaFan, Sai Kit. "An study of unit machine operations for tool paths in high speed milling /". View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?IELM%202008%20FAN.
Pełny tekst źródłaGaliotto, A., i Adriano Peruzzi. "Cold Milling - 39: innovative temperature/humidity control on milling operation". Verein für Gerberei-Chemie und -Technik e. V, 2019. https://slub.qucosa.de/id/qucosa%3A34142.
Pełny tekst źródłaCarpenter, Ian David. "Machinability assessment and tool selection for milling". Thesis, Online version, 1996. http://ethos.bl.uk/OrderDetails.do?did=1&uin=uk.bl.ethos.286659.
Pełny tekst źródłaLiles, Howard J. "High throughput profile millling for the flexible and accelerated processing of electric steels". Thesis, Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/47628.
Pełny tekst źródłaThompson, Michael B. "Development of a five-axis machining algorithm in flat end mill roughing /". Diss., CLICK HERE for online access, 2005. http://contentdm.lib.byu.edu/ETD/image/etd823.pdf.
Pełny tekst źródłaFowler, Gary. "Abrasive water-jet : controlled depth milling of titanium alloys". Thesis, University of Nottingham, 2003. http://eprints.nottingham.ac.uk/11436/.
Pełny tekst źródłaEl-Hofy, Mohamed Hassan. "Milling/routing of carbon fibre reinforced plastic (CFRP) composites". Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5529/.
Pełny tekst źródłaFussell, Barry K. "Modeling and adaptive force control of end milling operations /". The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487327695620678.
Pełny tekst źródłaAlharbi, W. N. H. "Development of a closed loop control system for vibratory milling". Thesis, Liverpool John Moores University, 2018. http://researchonline.ljmu.ac.uk/8456/.
Pełny tekst źródłaSharif, Safian. "Face milling of titanium coated alloys using coated and uncoated carbide tools". Thesis, Coventry University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299091.
Pełny tekst źródłaBrowne, D. G. "Development of a bench test to evaluate wear resistant materials and coal grindability for pulverizers". Thesis, Queensland University of Technology, 1987. https://eprints.qut.edu.au/36468/1/36468_Browne_1987.pdf.
Pełny tekst źródłaNiu, Caotan. "A study of tool life and machinability parameters in high speed milling of hardened die steels". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39557170.
Pełny tekst źródłaSkorupa, Jan J. "Wear of tube mill liners for South African power industry". Thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/23382.
Pełny tekst źródłaMa, Lei. "PVDF sensor based wireless monitoring of milling process". Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/47714.
Pełny tekst źródłaPatel, Bhavin Ramesh. "State space formulation of TFEA & uncharted islands of instability in milling". Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4898.
Pełny tekst źródłaThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on January 7, 2008) Includes bibliographical references.
Niu, Caotan, i 牛草坛. "A study of tool life and machinability parameters in high speed milling of hardened die steels". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39557170.
Pełny tekst źródłaLohse, Benjamin H. "The controlled ball milling of titanium and carbon to form TiC /". Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060221.110552/index.html.
Pełny tekst źródłaPisipati, Deepak. "Virtual manufacturing of pockets using end milling with multiple tool paths". Ohio : Ohio University, 2004. http://www.ohiolink.edu/etd/view.cgi?ohiou1177011829.
Pełny tekst źródłaZemčík, Tomáš. "Simulace průběhu řezné síly při obvodovém frézování válcovou frézou s přímými zuby". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229250.
Pełny tekst źródłaMachalová, Veronika. "Řezné síly při frézování vláknově vyztužených kompozitů". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227947.
Pełny tekst źródłaZlámal, Pavel. "Projekt lehké obrobny v TOS Kuřim - OS, a.s. - frézařské pracoviště". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227971.
Pełny tekst źródłaDhamija, Dinesh. "Macintosh - Bridgeport communications CAD/CAM". Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182784285.
Pełny tekst źródłaRenuka, Shivaswaroop R. "Development of models of CNC machines - EMCO VMC100 and EMCO TURN120P in virtual NC". Ohio : Ohio University, 1996. http://www.ohiolink.edu/etd/view.cgi?ohiou1178046654.
Pełny tekst źródłaГерасим’юк, Валерій Михайлович, i Valerii Herasymiuk. "Обґрунтування конструкції елементів приводу головного руху вертикально-фрезерного верстату". Master's thesis, ТНТУ ім. І. Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29680.
Pełny tekst źródłaУ дипломній роботі проведено аналіз конструктивних особливостей базової моделі верстату, а також верстатів-аналогів. Здійснено аналіз загальних структур приводів головного руху вертикально-фрезерних верстатів. Проведено обґрунтування компонувальної схеми та технологічних параметрів для модернізації верстата. Здійснено розробку структури модернізованого приводу на основі морфологічної матриці. На основі проведено аналізу вибрано оптимальну компонувальну схему шпиндельного вузла та проведено дослідження впливу кількості підшипників в передній опорі на жорсткість шпиндельного вузла. Проведено кінематичний і силовий розрахунок ступеневої та безступеневої частин приводу, на основі яких розроблено конструкції коробки швидкостей, шпиндельного вузла, а також системи переключення між ступеневою і безступеневою частинами приводу головного руху вертикально-фрезерного верстату. Проведено розрахунок вартості модернізації приводу головного руху верстата. Розроблені технічні рішення обґрунтовано на основі вимог охорони праці, безпеки життєдіяльності та охорони навколишнього середовища.
Analysis of the structural features of the machine-tool basic model, as well as similar machine-tool, has been carried out in the diploma paper. Analysis of the general structures of the vertical-milling machine main feed drive was performed. The component scheme and technological parameters for the updating of the machine were interpreted. The structure of the improved drive basing on the morphological matrix was developed. The optimal compiling scheme of the spindle unit was chosen basing on it and investigation of the effect of the bearings number in the initial support on the spindle unit rigidity was performed. Kinematic and strength calculations of the speed drive and variable-speed drive part were done, basing on which the design of the gear-box, spindle unit and the system of gearing between speed drive and variable-speed drive of the main feed drive of the vertical-milling machine have been carried out. The calculation of the expenditures for the updating of the main feed of the machine-tool was done. The developed engineering solutions were interpreted to meet the requirements of the health and safety program and the program of the environment protection.
Вступ, Аналітичний розділ, Аналіз формоутворення, Обґрунтування компонувальної схеми верстату, Технологічний розділ, Науково-дослідний розділ, Конструкторський розділ, Спеціальний розділ, Охорона праці та БЖД, Екологія, Обґрунтування економічної ефективності, Висновки, перелік посилань
Tsui, Kin-shing. "Tool path generation for protrusion milling". Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B36891332.
Pełny tekst źródłaShorr, Michael Jared. "Dynamic stability analysis for multi-flute end milling". Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/17789.
Pełny tekst źródłaPerry, Stephen Alan. "Precision compensation for cutter runout in peripheral milling". Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/18200.
Pełny tekst źródłaBondar, I. V. "Five-axis machining on CNC milling machines". Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65171.
Pełny tekst źródłaYuan, Weifeng. "Greedy tool heuristic for rough milling of complex pockets /". View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?IEEM%202002%20YUAN.
Pełny tekst źródłaIncludes bibliographical references (leaves 48-52). Also available in electronic version. Access restricted to campus users.
Tsui, Kin-shing, i 徐健成. "Tool path generation for protrusion milling". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B36891332.
Pełny tekst źródłaPowell, Malcolm S. "The effect of liner design upon charge motion in a rotary mill". Master's thesis, University of Cape Town, 1988. http://hdl.handle.net/11427/21925.
Pełny tekst źródłaKirk, Dean Frederick. "Development of a Small Envelope Precision Milling Machine". Thesis, University of Canterbury. Mechanical Engineering, 2006. http://hdl.handle.net/10092/2773.
Pełny tekst źródłaRathbun, Geoffrey P. "A Stewart Platform six-axis milling machine development". Thesis, University of Canterbury. Engineering, 1986. http://hdl.handle.net/10092/6421.
Pełny tekst źródłaSahari, M. "The microcomputer and the engraving/profile milling machine". Thesis, University of Bristol, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356231.
Pełny tekst źródłaGrebchenko, A. "Mechanization and automation gear milling". Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33627.
Pełny tekst źródłaKöksal, Sakip. "Face milling of nickel-based superalloys with coated and uncoated carbide tools". Thesis, Coventry University, 2000. http://curve.coventry.ac.uk/open/items/86a6b065-704a-475b-b805-9d3397487ddf/1.
Pełny tekst źródłaPafkovič, Roman. "Analýza rizik provozované CNC frézky MCV 754Q". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399342.
Pełny tekst źródłaAbrari, Farid. "Multi-axis milling of flexible parts /". *McMaster only, 1998.
Znajdź pełny tekst źródłaFortgang, Joel D. "Combined Mechanical and Command Design for Micro-Milling Machines". Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/10430.
Pełny tekst źródłaStevens, Anthony J. "An adaptive mimo application of the repetitive controller for runout force rejection in peripheral milling". Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/17669.
Pełny tekst źródłaEbrahimi, S. Morteza K. "Dynamic modelling and simulation of a CNC milling machine". Thesis, Cardiff University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287909.
Pełny tekst źródłaSon, Seung-Kil 1964. "A hybrid type small 5-axis CNC milling machine". Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29275.
Pełny tekst źródłaIncludes bibliographical references (leaves 116-119).
5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these machines have serial mechanisms so that low static and dynamic stiffness become very critical design issues especially for high speed machining. Parallel mechanisms have recently received attention from machine tool designers because of their inherent potential for stiffness and because of their compactness. However, much of the promised advantages of parallel machines only occur within a very small region of their workspace with the expense of the large machine-tool foot print. We discuss some of the kinematic and structural challenges to extracting machining performance from serial and parallel machines. We compare a hybrid machine, which combines serial and parallel mechanisms, with typical serial and parallel machines such as Euler angle machines and the Hexapod. In particular, we consider singularities, reversal characteristics, and manufacturability. We show that hybrid machines can benefit from the advantages of serial and parallel mechanisms while avoiding most potential pitfalls of both mechanisms. However, hybrid structures can suffer from the manufacturing problem of over-constraint. We show that the degree of over-constraint depends on the size of the parallel machine. We have designed and fabricated a small hybrid 5-axis motion platform, the MIT-SS-1, which can tolerate this over-constraint through a novel layout of axes. Numerical and experimental test results of the MIT-SS-1 are presented and compared. Finally we show that this structure has potential as a small 5-axis CNC milling machine.
by Seung-Kil Son.
Ph.D.
Golaski, Edmund Walter 1976. "Direct haptic control of a 3-axis milling machine". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/88887.
Pełny tekst źródłaКоротун, Микола Миколайович, Николай Николаевич Коротун, Mykola Mykolaiovych Korotun, Г. Ананченко i H. Ananchenko. "The construction and functions of the universal milling machine". Thesis, Вид-во СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5552.
Pełny tekst źródłaČunek, Jakub. "Konstrukce jednoúčelového frézovacího stroje". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230489.
Pełny tekst źródłaOzgen, Arda. "Cutting Strategies For Forging Die Manufacturing On Cnc Milling Machines". Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609433/index.pdf.
Pełny tekst źródłacutting speed, step over and feed are the main cutting parameters and these parameters affect geometrical accuracy and surface quality of the forging die cavities. In this study, effects of the cutting parameters on geometrical error have been examined on a representative die cavity profile. To remove undesired volume in the die cavities, available cutting strategies are investigated. Feed rate optimization is performed to maintain the constant metal removal rate along the trajectory of the milling cutter during rough cutting process. In the finish cutting process of the die cavities, Design of Experiment Method has been employed to find out the effects of the cutting parameters on the geometrical accuracy of the manufactured cavity profile. Prediction formula is derived to estimate the geometrical error value in terms of the values of the cutting parameters. Validity of the prediction formula has been tested by conducting verification experiments for the representative die geometry and die cavity geometry of a forging part used in industry. Good agreement between the predicted error values and the measured error values has been observed.
Radhakrishnan, Anupam. "Experimental and numerical investigation of subcritical bifurcations in milling". Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/5095.
Pełny tekst źródłaThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on January 8, 2008) Includes bibliographical references.