Gotowa bibliografia na temat „Microstructural and mechanical characterizations”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Microstructural and mechanical characterizations”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Microstructural and mechanical characterizations"
Solmaz, Mehmet, Hasan Kotan, Sabriye Açıkgöz i Mehmet Bağcı. "Microstructural Characterization and Mechanical Tests of Mill Rolls". Orclever Proceedings of Research and Development 1, nr 1 (31.12.2022): 220–39. http://dx.doi.org/10.56038/oprd.v1i1.204.
Pełny tekst źródłaFerreira-Palma, Carlos, Héctor J. Dorantes-Rosales, Víctor M. López-Hirata i Alberto A. Torres-Castillo. "Effect of Ag additions on the microstructure and phase transformations of Zn-22Al-2Cu (wt.%) alloy". International Journal of Materials Research 112, nr 2 (1.02.2021): 108–17. http://dx.doi.org/10.1515/ijmr-2020-8009.
Pełny tekst źródłaFrancisco, Fernanda Regina, Joao Roberto Moro, Evaldo Jose Corat, R. A. Campos i Osmar Bagnato. "Effect of Heat Treatment on Microstructure and Mechanical Property of Diamonds Substrates Brazed with Active Filler Metal". Defect and Diffusion Forum 353 (maj 2014): 254–58. http://dx.doi.org/10.4028/www.scientific.net/ddf.353.254.
Pełny tekst źródłaBenlamnouar, Mohamed Farid, Mohamed Hadji, Riad Badji, Nabil Bensaid, Taher Saadi, Yazid Laib dit Laksir i Sabah Senouci. "Optimization of TIG Welding Process Parameters for X70-304L Dissimilar Joint Using Taguchi Method". Solid State Phenomena 297 (wrzesień 2019): 51–61. http://dx.doi.org/10.4028/www.scientific.net/ssp.297.51.
Pełny tekst źródłaDos Santos, Silas Cardoso, Orlando Rodrigues Júnior i Letícia Lucente Campos. "Formation and EPR response of europium-yttria micro rods". QUARKS: Brazilian Electronic Journal of Physics, Chemistry and Materials Science 1, nr 1 (18.09.2019): 53–56. http://dx.doi.org/10.34019/2674-9688.2019.v1.28229.
Pełny tekst źródłaSheng, Hua, Inge Uytdenhouwen, Guido Van Oost i Jozef Vleugels. "Mechanical properties and microstructural characterizations of potassium doped tungsten". Nuclear Engineering and Design 246 (maj 2012): 198–202. http://dx.doi.org/10.1016/j.nucengdes.2011.10.008.
Pełny tekst źródłaDzhurinskiy, Dmitry, Abhishek Babu, Stanislav Dautov, Anil Lama i Mayuribala Mangrulkar. "Modification of Cold-Sprayed Cu-Al-Ni-Al2O3 Composite Coatings by Friction Stir Technique to Enhance Wear Resistance Performance". Coatings 12, nr 8 (4.08.2022): 1113. http://dx.doi.org/10.3390/coatings12081113.
Pełny tekst źródłaLiu, Yuan, Qingqing Ding, Xiao Wei, Yuefei Zhang, Ze Zhang i Hongbin Bei. "The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy". Crystals 12, nr 10 (21.09.2022): 1336. http://dx.doi.org/10.3390/cryst12101336.
Pełny tekst źródłaMaury, Nicolas, Moukrane Dehmas, Claude Archambeau-Mirguet, Jérôme Delfosse i Elisabeth Aeby-Gautier. "MICROSTRUCTURAL EVOLUTIONS AND MECHANICAL PROPERTIES DURING LONG-TERM AGEING OF TITANIUM ALLOY Ti-17". MATEC Web of Conferences 321 (2020): 12004. http://dx.doi.org/10.1051/matecconf/202032112004.
Pełny tekst źródłaMohan, Dhanesh G., Jacek Tomków i S. Gopi. "Induction Assisted Hybrid Friction Stir Welding of Dissimilar Materials AA5052 Aluminium Alloy and X12Cr13 Stainless Steel". Advances in Materials Science 21, nr 3 (1.09.2021): 17–30. http://dx.doi.org/10.2478/adms-2021-0015.
Pełny tekst źródłaRozprawy doktorskie na temat "Microstructural and mechanical characterizations"
Katiyar, Pushkar. "PROCESSING, MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF MECHANICALLY ALLOYED Al-Al2O3 NANOCOMPOSITES". Master's thesis, University of Central Florida, 2004. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4496.
Pełny tekst źródłaM.S.
Department of Mechanical, Materials and Aerospace Engineering;
Engineering and Computer Science
Materials Science and Engineering
BACELLAR, RAPHAEL SIMOES. "MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF AGRIBUSINESS WASTES". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2010. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=16445@1.
Pełny tekst źródłaCONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
Compósitos reforçados por fibras lignocelulósicas e, também, materiais estruturais de origem vegetal, tal como o bambu, vêm sendo cada vez mais empregados em diversos segmentos industriais, tendo em vista a crescente necessidade da sociedade de usar materiais provenientes de recursos naturais renováveis. Assim sendo, este trabalho visa analisar resíduos da agroindústria da produção sustentável de palmito e de coco, que são os caules das palmeiras Bactris gasipaes (pupunha) e Cocos nucifera (coqueiro). O objetivo em caracterizá-los é fundamentar uma via alternativa de obtenção de madeira, considerando os seguintes aspectos: a disponibilidade, a preservação do meio ambiente, o bom desempenho do material e o baixo custo. Neste trabalho foi feita a caracterização microestrutural da pupunha por microscopia eletrônica de varredura e microscopia óptica digital. O comportamento térmico e termo-mecânico da pupunha foi avaliado por termogravimetria e por análise termo-dinâmico mecânica. Foi avaliado ainda o comportamento mecânico em flexão, compressão e cisalhamento na linha de cola de corpos de prova usinados do estipe da pupunha, bem como se avaliou por difração de raios-X a estrutura cristalina e o grau de cristalinidade do material. Além disso, foi feita a caracterização da resistência à abrasão e avaliado o efeito do envelhecimento por absorção de água e por radiação UV nas propriedades à flexão da pupunha. Também foram avaliadas a resistência à abrasão e as propriedades mecânicas à flexão e à compressão do caule do coqueiro.
Composites reinforced by lignocellulosic fibers and structural cellulosic materials, such as bamboo, have being increasingly used in many industrial fields, owing to the growing society need to use materials from renewable resources. Therefore, this study aims to analyze two agro-wastes of the cococnut and heart of palm sustainable production, which are the trunks of these palms (Bactris gasipaes and Cocos nucifera). The main objective is to establish the foundation for an alternative way of obtaining wood, considering the following aspects: availability, environmental conservation, good performance and low material cost. In this work microestrutural characterization of pupunha trunk was done by scanning electron microscopy and digital optical microscopy. The thermal and the thermo mechanical behaviors were evaluated by thermogravimetric analysis and by dynamic thermo mechanics analysis. Also rated was the material mechanical behavior in bending, compressing and shearing in the glue line. The material crystal structure and the degree of crystallinity was tested by X-ray diffraction. The resistance to abrasion was checked and the effect of aging due to water absorption and UV radiation in the bending properties of pupunha. Finally we verified the abrasion resistance and mechanical properties of bending and compressing the coconut palm.
Lee, William Morgan. "Dynamic Microstructural Characterization of High Strength Aluminum Alloys". NCSU, 2008. http://www.lib.ncsu.edu/theses/available/etd-04302008-114019/.
Pełny tekst źródłaRubisoff, Haley. "MICROSTRUCTURAL CHARACTERIZATION OF FRICTION STIR WELDED TI-6AL-4V". MSSTATE, 2009. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07082009-203851/.
Pełny tekst źródłaANDIA, JOSE LUIS MONTALVO. "API X80 HAZ PHYSICAL SIMULATION AND MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2012. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=21807@1.
Pełny tekst źródłaCOORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTS. DE ENSINO
Foram utilizados dois sistemas de aço API 5L X80, Nb-Cr e Nb-Cr-Mo, para obter as diferentes regiões da ZTA pertencentes a uma soldagem multipasse. Estas regiões são denominadas de: região de grãos grosseiros inalterados (RGGI), região de grãos refinados reaquecidos supercriticamente (RGRRS), região de grãos grosseiros reaquecidos intercriticamente (RGGRI), região de grãos grosseiros reaquecidos subcriticamente (RGGRS). Estas regiões foram obtidas para dois aportes de calor (1,2 e 2,5 kJ/mm) e a RGGRI por ser considerada a região onde poderiam ser formadas zonas frágeis localizadas (ZFL) foram utilizados também aportes de calor de 3,0 e 4,0 kJ/mm. Cada uma das regiões obtidas pela simulação física foi submetida a ensaios mecânicos de impacto Charpy e dureza, assim como a análises metalográficos por microscopia ótica (MO) e microscopia eletrônica de varredura (MEV). Foi possível observar que as microestruturas pertencentes a uma ZTA simulada obtidas com o equipamento (GleebleR3800) se mostram compatíveis com aquelas pertencentes a uma soldagem real. Este resultado comprova que as velocidades de resfriamento obtidas pela simulação foram similares àquelas da soldagem real. A adição de Mo ao sistema Nb-Cr-Mo não promoveu mudanças significativas tanto a nível microestrutural, observado por MO e MEV, como em termos de propriedades mecânicas.
Two API 5L steels grade X80 of the systems Nb-Cr and Nb-Cr-Mo, were submitted to physical simulation in order to obtain different regions of the HAZ similar to those of a multipass welding, the coarse grained heat affected zone (CGHAZ), supercritically coarse grained heat affected zone (SCCGHAZ), intercritically coarse grained heat affected zone (ICCGHAZ), subcritically coarse grained heat affected zone (SCGHAZ). The welding simulation was carried out on a Gleeble R 3800 considering two thermal cycles and different heat inputs 1.2, 2.5, 3.0 and 4,0 kJ/mm, typical of a girth weld. All HAZ zones were simulated only for 1.2 and 2.5kJ/mm. Since the ICCGHAZ is the probable weak link where a local brittle zone (LBZ) can occur, this region was simulated for all heat inputs studied. All simulated regions were subjected to traditional mechanical tests such as impact Charpy-V at -40 and -60C and microhardness Hv1kg. Metallographic analysis by optical microscopy (OM) and scanning electron microscopy (SEM) and fractography were also performed. The microstructures obtained for the different regions of the HAZ, by simulation were close to those of a real welding, however, the cooling rates obtained by simulation were slower than that obtained in a real welding. The mechanical properties and microstructure of the different regions of the HAZ for the systems NbCr and NbCrMo indicate that the microstructural and mechanical behavior of the intercritical region (ICCGHAZ) was considered to be similar to a local brittle zone (LBZ) for all conditions studied.
Wei, Yun. "Microstructural characterization and mechanical properties of super 13% Cr steel". Thesis, University of Sheffield, 2005. http://etheses.whiterose.ac.uk/12826/.
Pełny tekst źródłaQuerin, Joseph A. "Microstructural Characterization of AA6022-T43 Aluminum Alloy Sheet During Monotonic Loading". MSSTATE, 2005. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07082005-140147/.
Pełny tekst źródłaDash, Manas Ranjan. "Thermo-mechanical durability assessment and microstructural characterization of 95.5Pb2Sn2.5Ag high temperature solder". College Park, Md. : University of Maryland, 2006. http://hdl.handle.net/1903/3570.
Pełny tekst źródłaThesis research directed by: Dept. of Mechanical Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
Prabhu, Balaji. "MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF AL-AL2O3 NANOCOMPOSITES SYNTHESIZED BY HIGH-ENERGY MILLING". Master's thesis, University of Central Florida, 2005. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3571.
Pełny tekst źródłaM.S.M.S.E.
Department of Mechanical, Materials and Aerospace Engineering;
Engineering and Computer Science
Materials Science and Engineering
Bei, Guo-Ping. "Synthesis, microstructural characterization and mechanical properties of nanolaminated Ti3AlxSn(1-x)C2 MAX phases". Poitiers, 2011. http://nuxeo.edel.univ-poitiers.fr/nuxeo/site/esupversions/9a20805b-0e53-47c0-8b16-c1a4ac3c2042.
Pełny tekst źródłaThe work described in this thesis concerns the elaboration, the microstructural characterization and the mechanical properties of nanolaminated MAX phases solid solutions. The MAX phases represent a large class of ceramics. They are a family of ternary nitrides and carbides, with the general formula Mn+1AXn (n=1, 2 or 3), where M is an early transition metal, A is a metal of the groups IIIA or IVA, and X is either carbon or nitrogen. We performed at first the optimization of the synthesis, by powder metallurgy, of highly pure Ti3AlC2. Since a new MAX phase, Ti3SnC2, has been discovered in the laboratory in 2007, the study has been further focused on the synthesis of Ti3AlxSn(1-x)C2 solid solutions by hot isostatic pressing. In a second step, the microstructural characterization of these solid solutions has been carried out, by studying, in particular, the variation of the cell parameters, the distortion rates of [Ti6C] octahedrons and [Ti6AlxSn(1-x)] trigonal prisms. Finally, we have determined the intrinsic hardness and the elastic modulus of the various solid solutions as a function of the Al content by using the nanoindentation. Besides, uniaxial and gas confining compression tests were realized at room temperature, to study and compare the deformation mechanisms of Ti3AlC2 and Ti3Al0. 8Sn0. 2C2. The relationship between microstructural modifications and mechanical properties are discussed. We show in particular that Ti3AlC2 and Ti3Al0. 8Sn0. 2C2 can be considered as "Kinking Non-linear Elastic" materials
Książki na temat "Microstructural and mechanical characterizations"
Center, Lewis Research, red. Tensile properties and microstructural characterization of Hi-Nicalon SiC/RBSN composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.
Znajdź pełny tekst źródłaSingh, Jag J. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. [Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.
Znajdź pełny tekst źródłaH, Pater Ruth, Eftekhari Abe i Langley Research Center, red. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.
Znajdź pełny tekst źródłaSingh, Jag J. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.
Znajdź pełny tekst źródłaBansal, Narottam P. Microstructural, chemical and mechanical characterization of polymer-derived Hi-Nicalon fibers with surface coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.
Znajdź pełny tekst źródłaBansal, Narottam P. Microstructural, chemical and mechanical characterization of polymer-derived Hi-Nicalon fibers with surface coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.
Znajdź pełny tekst źródłaAntonio, Brian Kent. Material and mechanical characterizations for braided composite pressure vessels. Springfield, Va: Available from the National Technical Information Service, 1990.
Znajdź pełny tekst źródłaA, DiCarlo James, i NASA Glenn Research Center, red. Thermomechanical characterization of SiC fiber tows and implications for CMC. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Znajdź pełny tekst źródłaMcHale, Paul F. Factors influencing the microstructural and mechanical properties of ULCB steel weldments. Monterey, Calif: Naval Postgraduate School, 1991.
Znajdź pełny tekst źródłaClark, Elizabeth J. Molecular and microstructural factors affecting mechanical properties of polymeric cover plate materials. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1985.
Znajdź pełny tekst źródłaCzęści książek na temat "Microstructural and mechanical characterizations"
Gissler, W., i J. Haupt. "Microstructural Characterization of Films and Surface Layers". W Eurocourses: Mechanical and Materials Science, 313–33. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-017-0631-5_14.
Pełny tekst źródłaAjmi, Basma, Mohamed Kchaou, Amilcar Ramalho, Amira Sellami, Antonio J. Gamez i Nabil Bouzayani. "Microstructural and Mechanical Characterization of a Baby Diaper". W Lecture Notes in Mechanical Engineering, 312–19. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52071-7_43.
Pełny tekst źródłaBarcellona, A., L. Cannizzaro i D. Palmeri. "Microstructural Characterization of Thermo-Mechanical Treated TRIP Steels". W Sheet Metal 2007, 71–78. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.71.
Pełny tekst źródłaKumar, Chandan, i Manas Das. "Microstructural Characterization of Ti-6Al-4V Alloy Fiber Laser Weldments". W Advances in Mechanical Engineering, 475–86. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0124-1_43.
Pełny tekst źródłaWötting, G., B. Kanka i G. Ziegler. "Microstructural Development, Microstructural Characterization and Relation to Mechanical Properties of Dense Silicon Nitride". W Non-Oxide Technical and Engineering Ceramics, 83–96. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-3423-8_6.
Pełny tekst źródłaDeshpande, Shridhar, D. Amaresh Kumar, C. T. Murali i Shrishail Kakkeri. "Mechanical and Microstructural Characterization of Copper and Carbon Nanotubes Composites". W Lecture Notes in Mechanical Engineering, 811–25. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4739-3_71.
Pełny tekst źródłaInterrante, Leonard V., Kevin Moraes, Leo MacDonald i Walter Sherwood. "Mechanical, Thermochemical, and Microstructural Characterization of AHPCS-Derived SiC". W Ceramic Transactions Series, 123–40. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118406014.ch11.
Pełny tekst źródłaKatsari, C. M., H. Che, D. Guye, A. Wessman i S. Yue. "Microstructural Characterization and Mechanical Properties of Rene 65 Precipitates". W Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, 629–41. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89480-5_41.
Pełny tekst źródłaNakamura, Toshio, Cunyou Lu i Chad S. Korach. "Mechanical Properties of Tooth Enamel: Microstructural Modeling and Characterization". W Conference Proceedings of the Society for Experimental Mechanics Series, 171–79. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0219-0_24.
Pełny tekst źródłaZheng, Xiu Hua, Bilal Dogan i Karl Heinz Bohm. "Microstructural and Mechanical Characterization of TiAl/Ti6242 Diffusion Bonds". W Materials Science Forum, 1393–400. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.1393.
Pełny tekst źródłaStreszczenia konferencji na temat "Microstructural and mechanical characterizations"
Victoria, Patricia Iglesias, Weimin Yin, Surendra K. Gupta i Steve Constantinides. "Microstructural Characterization of Sm-Co Magnets". W ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-37106.
Pełny tekst źródłaMahajan, Heramb P., Mohamed Elbakhshwan, Bruce C. Beihoff i Tasnim Hassan. "Mechanical and Microstructural Characterization of Diffusion Bonded 800H". W ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21502.
Pełny tekst źródłaYedida, V. V. Satyavathi, Hitesh Vasudev i Shaik Vaseem Akram. "Mechanical and microstructural characterization of YSZ coating". W 14TH INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND CHARACTERIZATION 2023. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0194067.
Pełny tekst źródłaDamião de Souza, Carlos, Vinicius Torres dos Santos, Flávia Gonçalves Lobo, Marcio Silva, Caique Movio Pereira de Souza, Rene Oliveira, Vanessa Seriacopi i Wilson Carlos Silva Junior. "MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF THE BRONZE ALLOY CUSN8ZN4PB1 COMMONLY USED IN BEARINGS". W 27th Brazilian Congress of Thermal Sciences and Engineering. ABCM, 2023. http://dx.doi.org/10.26678/abcm.cobem2023.cob2023-0356.
Pełny tekst źródłaDOTCHEV, PETAR, SEYED HAMID REZA SANEI, ERIC STEINMETZ i JASON WILLIAMS. "Nanocomposites: Manufacturing, Microstructural Characterization and Mechanical Testing". W American Society for Composites 2018. Lancaster, PA: DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/asc33/26060.
Pełny tekst źródłaPereira, Gualter, Waldek Wladimir Bose Filho, Gustavo Teixeira, Fernando Ferreira Fernandez i Julian Arnaldo Avila Diaz. "MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF WE43 MAGNESIUM ALLOY". W 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-1839.
Pełny tekst źródłaZeferino, Danilo, Lucas Costa Vieira, Matheus Costa, Claudinei José de Oliveira, Marcelo Câmara, Pedro Henrique Antônio Santos, Sara Silva Ferreira de Dafé i BRUNNA DE OLIVEIRA. "Microstructural and Mechanical Characterization of Hardox 450 Steel". W 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-2892.
Pełny tekst źródłaNadeau, Joseph C., i Mauro Ferrari. "Microstructural Optimization of a Functionally Gradient Layer". W ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0645.
Pełny tekst źródłaMashali, Farzin, Ethan M. Languri, Gholamreza Mirshekari, Jim Davidson i David Kerns. "Microstructural and Thermal Characterization of Diamond Nanofluids". W ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87496.
Pełny tekst źródłaSoboyejo, W. O., C. Mercer, S. Allameh, B. Nemetski, N. Marcantonio i J. Ricci. "Microstructural Characterization of Micro-Textured Titanium Surfaces". W ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2674.
Pełny tekst źródłaRaporty organizacyjne na temat "Microstructural and mechanical characterizations"
Tiku, Pussegoda i Luffman. L52031 In-Situ Pipeline Mechanical Property Characterization. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2003. http://dx.doi.org/10.55274/r0011133.
Pełny tekst źródłaSikka, V. K., C. R. Howell, F. Hall i J. Valykeo. Microstructural and mechanical property characterization of ingot metallurgy ODS iron aluminide. Office of Scientific and Technical Information (OSTI), grudzień 1997. http://dx.doi.org/10.2172/330687.
Pełny tekst źródłaNatesan, K., D. Renusch, B. W. Veal i M. Grimsditch. Microstructural and mechanical characterization of alumina scales thermally developed on iron aluminide alloys. Office of Scientific and Technical Information (OSTI), listopad 1996. http://dx.doi.org/10.2172/437705.
Pełny tekst źródłaYoon, Heayoung. In-situ Characterizations of Microstructural Degradation of Perovskite Solar Cells. Office of Scientific and Technical Information (OSTI), listopad 2023. http://dx.doi.org/10.2172/2208889.
Pełny tekst źródłaSagartz, M. J., D. Segalman i T. Simmermacher. Mechanical diode: Comparing numerical and experimental characterizations. Office of Scientific and Technical Information (OSTI), luty 1998. http://dx.doi.org/10.2172/574174.
Pełny tekst źródłaJablonski, David. DTRT57-09-C-10046 Digital Imaging of Pipeline Mechanical Damage and Residual Stress. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), luty 2010. http://dx.doi.org/10.55274/r0011872.
Pełny tekst źródłaBhattacharya, Arunodaya, Xiang Chen, Kory D. Linton, Yukinori Yamamoto, Mikhail A. Sokolov, Logan N. Clowers i Yutai Katoh. Mechanical properties and microstructure characterization of unirradiated Eurofer-97 steel variants for the EUROfusion project. Office of Scientific and Technical Information (OSTI), sierpień 2018. http://dx.doi.org/10.2172/1471901.
Pełny tekst źródłaNatesan, K., D. L. Smith, P. G. Sanders i K. H. Leong. Laser-welded V-Cr-Ti alloys: Microstructural and mechanical properties. Office of Scientific and Technical Information (OSTI), marzec 1998. http://dx.doi.org/10.2172/335378.
Pełny tekst źródłaClark, Elizabeth J. Molecular and microstructural factors affecting mechanical properties of polymeric cover plate materials. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3197.
Pełny tekst źródłaKumar, Ramasamy Sanjeev, Allaka Gopichand i Rajumani Srinivasan. Fabrication, Microstructural and Mechanical Behaviour of Al-ZrO2 -TiC Hybrid Metal Matrix Composite. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, listopad 2021. http://dx.doi.org/10.7546/crabs.2021.11.10.
Pełny tekst źródła