Gotowe bibliografie tematyczne / MICROSTRIP LIVE

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „MICROSTRIP LIVE”

Autor: Grafiati

Data publikacji: 11 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „MICROSTRIP LIVE”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "MICROSTRIP LIVE"

Zarin, Muhammad, Gulzar Ahmad i Faheem Ali. "Design and Implementation of Microstrip Patch Antenna Array for “5G” HD Live Video Streaming Applications". International journal of Engineering Works 9, nr 12 (2022): 181–86. http://dx.doi.org/10.34259/ijew.22.912181186.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chryssomallis, M., K. Siakavara i J. N. Sahalos. "A study of open thick microstrip: the hybrid quasistatic approximation". Canadian Journal of Physics 67, nr 8 (1.08.1989): 747–52. http://dx.doi.org/10.1139/p89-131.

Pełny tekst źródła

Streszczenie:

In this paper we study microstrips with rectangular and rounded edge cross sections. A hybrid quasistatic method is applied and the effective permittivity and the attenuation constant of the microstrip are found. Instead of the dielectric constant of the substrate an ideational one is used that depends on the geometry and the frequency. The attenuation constant for the rectangular microstrip was found to be in good agreement with values given in the literature. A microstrip with a rounded edge cross section has a smaller attenuation constant due to the conductor than that of a microstrip with a rectangular crosssection. Thus, a rounded edge microstrip is preferred because it will give an appreciable effect in reducing the ohmic losses of the line.

Style APA, Harvard, Vancouver, ISO itp.

Li, Mingshun, Wei Song i Xinqing Sheng. "A Broadband Circularly Polarized Antenna with Stable Gain Based on Square Slotted Ground". Journal of Physics: Conference Series 2464, nr 1 (1.03.2023): 012020. http://dx.doi.org/10.1088/1742-6596/2464/1/012020.

Pełny tekst źródła

Streszczenie:

Abstract In this paper, a circularly polarized (CP) low cost, low profile antenna with broadband stable gain is proposed. The antenna consists of a grounded square slot with two inverted-L shaped microstrips, an asymmetrical Y-shaped microstrip radiator with a stub, and several fine tuning elements. The CP radiation is first realized by using the Y-shaped microstrip line, which incorporates a stub is to realize better impedance matching. Next, by utilizing two Inverted-L microstrips into the corners of the grounded slot, the axial ratio (AR) characteristic can be further improved. A wider AR bandwidth (ARBW) can be achieved by utilizing four rectangular strips as fine tuning elements. Simulation results show the proposed antenna demonstrates a radiation with a CP bandwidth of 50% and a stable gain with average value of 5.18 dBi.

Style APA, Harvard, Vancouver, ISO itp.

Aina, Taiwo Samuel. "Investigation on Performance of Microstrip Patch Antenna for a Practical Wireless Local Area Network (WLAN) Application". International Journal for Research in Applied Science and Engineering Technology 10, nr 1 (31.01.2022): 221–28. http://dx.doi.org/10.22214/ijraset.2022.39799.

Pełny tekst źródła

Streszczenie:

Abstract: The performance of a microstrip patch antenna for a practical wireless local area network application is investigated in this research. This design is built around the transmission line concept. The antenna design substrate is FR4 (lossy) with a dielectric constant (Er) of 4.3 dielectric material, and the ground and patch materials are copper (annealed). The substrate is 71.62mm in width and 55.47mm in length. The height of the dielectric material is 1.6mm, which is the normal size for FR4 material. The conducting patch element has a width of 35.81mm and a length of 27.73mm for a resonance frequency of 2.573 GHz. A simulation with CST studio suite was used to optimise the antenna design. Keywords: Microstrio patch antenna, CST suite, WLAN application, Transmission line, Antenna design

Style APA, Harvard, Vancouver, ISO itp.

Rhee, Eugene, i Ji Hoon Lee. "Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna". Advanced Materials Research 684 (kwiecień 2013): 303–6. http://dx.doi.org/10.4028/www.scientific.net/amr.684.303.

Pełny tekst źródła

Streszczenie:

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

Style APA, Harvard, Vancouver, ISO itp.

Wang, H., X. B. Huang, D. G. Fang i G. B. Han. "A Microstrip Antenna Array Formed by Microstrip Line Fed Tooth-Like-Slot Patches". IEEE Transactions on Antennas and Propagation 55, nr 4 (kwiecień 2007): 1210–14. http://dx.doi.org/10.1109/tap.2007.893428.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

La, Dong-Sheng, Xin Guan, Shuai-Ming Chen, Yu-Ying Li i Jing-Wei Guo. "Wideband Band-Pass Filter Design Using Coupled Line Cross-Shaped Resonator". Electronics 9, nr 12 (17.12.2020): 2173. http://dx.doi.org/10.3390/electronics9122173.

Pełny tekst źródła

Streszczenie:

In this paper, a wideband bandpass filter with a coupled line cross-shaped resonator (CLCSR) is proposed. The proposed bandpass filter is composed of two open-end parallel coupled lines, one short-end parallel coupled line, one branch microstrip line, and the parallel coupled line feed structure. With the use of the even and odd mode approach, the transmission zeros and transmission poles of the proposed bandpass filter are analyzed. The coupling coefficient of the parallel coupled line feed structure is big, so the distance between the parallel coupled line is too small to be processed. A three microstirp lines coupled structure is used to realize strong coupling and cross coupling. This structure also can reduce the return loss in passband and increase the out-of-band rejection. The transmission zeros can be adjusted easily by varying the lengths of the open-end parallel coupled line or the short-end parallel coupled line. The proposed bandpass filter is fabricated and measured. The simulated results agree well with the measured ones, which shows that the design method is valid.

Style APA, Harvard, Vancouver, ISO itp.

Homentcovschi, D. "A cylindrical multiconductor stripline-like microstrip transmission line". IEEE Transactions on Microwave Theory and Techniques 37, nr 3 (marzec 1989): 497–503. http://dx.doi.org/10.1109/22.21620.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kumar, Pradeep, Rachit Gangwar i Nishant Kumar Yadav. "Microstrip Patch Antenna". International Journal for Research in Applied Science and Engineering Technology 10, nr 5 (31.05.2022): 5303–7. http://dx.doi.org/10.22214/ijraset.2022.42690.

Pełny tekst źródła

Streszczenie:

Abstract: Performance parameters like return loss, voltage standing wave ratio, gain, and radiation pattern are calculated. Design frequency is 2.4 GHz, the copper-coated substrate material is RT Duroid 5880 having dielectric constant ε=2.2 and thickness is 1.6 mm. The feeding technique, employed in Microstrip patch Antenna is Microstrip 50 Ω feed line. employing a parametric study found that the proposed antenna design are useful for ISM band applications like Wi-Fi, Bluetooth, 2G/3G/LTE mobile communication systems.

Style APA, Harvard, Vancouver, ISO itp.

Xu, Kaihang. "Broadband Microstrip Antenna Overview". Highlights in Science, Engineering and Technology 27 (27.12.2022): 621–29. http://dx.doi.org/10.54097/hset.v27i.3825.

Pełny tekst źródła

Streszczenie:

Microstrip antennas are widely used in people's daily life. Microstrip antenna has the advantages of low cost, low profile, small space occupation, and high conformal capability. So the design of microstrip antennas can be encountered in daily life. Microstrip antennas include the military, aerospace, medical, and so on. Microstrip antenna has a wide research space. The three microstrip antennas, U-shaped open slit laminated microstrip antenna, dual frequency circularly polarized laminated microstrip antenna, and non-radiating edge-fed broadband double-layer microstrip patch antenna are mainly introduced to understand the research progress and expectation of today's microstrip antennas. This paper firstly introduces the basic theoretical concept of microstrip antenna, then introduces the cavity mode theory, and then mainly lists and introduces three kinds of designed microstrip antenna structures. Finally, these three types of microstrip patch antennas are analyzed. And the advantages, disadvantages, and development fields of the corresponding types of microstrip patch antennas are introduced. The application determines the structure of the method used, and each design has its strengths. Microstrip antennas always have room for research, and continuous research will be applied to more fields.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "MICROSTRIP LIVE"

Wimberley, Jack Timpson. "Behavior of Periodic Coupled Microstrip Resonators". Thesis, Boston College, 2011. http://hdl.handle.net/2345/1983.

Pełny tekst źródła

Streszczenie:

Thesis advisor: Krzysztof Kempa
The resonant modes of a sequence of periodically spaced microstrip resonators is studied. The system is analyzed as transmission line with periodic capacitive gaps, as a waveguide with apertures via normal mode expansion, and through a derivation of the static fields in the gap between two microstrip resonators via conformal mapping. FDTD simulations are also performed to numerically calculate the resonant modes of the sequence and also its absorption spectrum when it contains a lossy dielectric. It is found, as expected, that when the gap size is large, the microstrip resonators are uncoupled and there resonant modes are unperturbed. As the gap size narrows, the resonators become strongly coupled, and changing boundary conditions perturb the resonant modes upwards in frequency. Moreover, an additional resonant mode is observed that does not correspond to any uncoupled mode
Thesis (BS) — Boston College, 2011
Submitted to: Boston College. College of Arts and Sciences
Discipline: College Honors Program
Discipline: Physics Honors Program
Discipline: Physics

Style APA, Harvard, Vancouver, ISO itp.

Sze, Kin Yip. "Analysis of line-source-fed single-layer microstrip reflectarrays". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/NQ62669.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jin, Won Tae. "Circuit models for a millimeter-wave suspended-microstrip line discontinuity". Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA240906.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Systems Engineering (Electronic Warfare))--Naval Postgraduate School, September 1990.
Thesis Advisor(s): Atwater, Harry A. Second Reader: Janaswamy, Rama. "September 1990." Description based on title screen as viewed on December 29, 2009. DTIC Identifier(s): Suspended striplines, microstrip lines, equivalent circuits, program listings, theses. Author(s) subject terms: Suspended-microstrip line, step discontinuity, equivalent circuit model, step-change. Includes bibliographical references (p. 60). Also available in print.

Style APA, Harvard, Vancouver, ISO itp.

Rodríguez, Cepeda Juan Pablo. "Modelatge multimodal de transicions i asimetries en línies three-line-microstrip". Doctoral thesis, Universitat Ramon Llull, 2010. http://hdl.handle.net/10803/9142.

Pełny tekst źródła

Streszczenie:

Una línia de transmissió three-line-microstrip consisteix en tres pistes paral·leles practicades sobre la cara d'un dielèctric amb un pla de massa inferior. La propagació en aquesta línia es pot descriure en termes de tres modes fonamentals anomenats ee, oo i oe. Tot i que aquests modes són ortogonals interaccionen entre sí a qualsevol transició, discontinuïtat o asimetria. En el pla d'una transició o asimetria es genera un intercanvi d'energia o conversió modal en el que prenen part tots els modes.
En aquest treball s'analitza la conversió modal que s'origina en un conjunt de transicions i asimetries construïdes sobre línies three-line-microstrip. L'estudi es realitza aplicant la tècnica de l'anàlisi multimodal. L'ús d'aquesta tècnica permet la deducció d'una sèrie de models multimodals (un per a cada transició) que proporcionen una anàlisi simple, rigorosa i quantitativa d'aquest fenomen.
La validesa d'aquest estudi es verifica de manera experimental. Els bons resultats obtinguts demostren que els models multimodals proposats prediuen de manera precisa el comportament de les transicions. Aquest fet permet el seu ús per analitzar circuits o estructures constituïts per trams de tres pistes acoblades. En el cas d'aquesta tesi, han estat aplicats als camps de l'EMC i de les microones. Pel que fa a l'EMC, s'ha realitzat un estudi de l'acoblament i la integritat del senyal en configuracions de PCB amb trams de tres pistes acoblades. Aquest estudi ha permès identificar les transicions i asimetries en aquests circuits com a possibles fonts d'interferència i de degradació dels senyals ja que la conversió modal es pot interpretar com a un procés d'interferència que involucra tots els senyals presents. Pel que fa a les microones, s'ha realitzat una anàlisi multimodal de filtres spurline. Aquesta anàlisi ha permès desenvolupar dues noves estructures, la principal característica de les quals és la seva compacitat que, a diferència d'altres estructures similars, s'aconsegueix permetent la presència d'un nou mode en el procés de ressonància. L'ús dels models multimodals per a l'anàlisi d'aquestes estructures ha permès una interpretació clara i senzilla del seu funcionament així com el desenvolupament d'una sèrie de regles de disseny que permeten un ajust fàcil i ràpid de certs paràmetres dels filtres com ara la freqüència central i l'ample de banda.
Una línea de transmisión three-line-microstrip consiste en tres pistas paralelas practicadas sobre la cara de un dieléctrico con un plano de masa inferior. La propagación en esta línea se puede describir en términos de tres modos fundamentales llamados ee, oo i oe. Aunque estos modos son ortogonales interaccionan entre se en cualquier transición, discontinuidad o asimetría. En el plano de una transición o asimetría se genera un intercambio de energía o conversión modal en el que toman parte todos los modos.
En este trabajo se analiza la conversión modal que se origina en un conjunto de transiciones i asimetrías construidas sobre líneas three-line-microstrip. El estudio se realiza aplicando la técnica del análisis multimodal. El uso de esta técnica permite la deducción de una serie de modelos multimodales (un per a cada transición) que proporcionan un análisis simple, riguroso i cuantitativo de este fenómeno.
La validez de este estudio se verifica de manera experimental. Los buenos resultados obtenidos demuestran que los modelos multimodales propuestos predicen de manera precisa el comportamiento de las transiciones. Este hecho permite su uso para analizar circuitos o estructuras constituidos por tramos de tres pistas acopladas. En esta tesis doctoral, han sido aplicados a los campos de la EMC i de las microondas. En el primero de ellos, se ha realizado un estudio del acoplamiento y la integridad de la señal en configuraciones de PCB con tramos de tres pistas acopladas. Este estudio ha permitido identificar las transiciones y asimetrías en estos circuitos como posibles fuentes de interferencia y de degradación de las señales ya que la conversión modal se puede interpretar como a un proceso de interferencia que involucra todas las señales presentes. En el campo de las microondas, se ha realizado un análisis multimodal de filtros spurline. Este análisis ha permitido desarrollar dos nuevas estructuras, cuya principal característica es su compacidad que, a diferencia de otras estructuras similares, se consigue permitiendo la presencia de un nuevo modo en el proceso de resonancia. El uso de los modelos multimodales para el análisis de estas estructuras ha permitido una interpretación clara i sencilla del su funcionamiento así como el desarrollo de una serie de reglas de diseño que permiten un ajuste fácil i rápido de ciertos parámetros de los filtros como por ejemplo la frecuencia central y el ancho de banda.
A three-line-microstrip transmission line consists of three parallel coupled strips printed on a grounded dielectric substrate. The propagation in this line can be described in terms of three fundamental modes, namely the ee, oo and oe modes. These modes are orthogonal and propagate independently unless a transition or asymmetry is present in the line. Any transition or asymmetry will generate an energy exchange or modal interaction among all the propagating modes.
In this work, the modal interaction of a set of transitions and asymmetries in three-line-microstrip transmission lines is analyzed. The study is carried out by using the multimodal analysis. By means of this technique a set of multimodal circuit models (one for each transition) is derived. These models provide a simple and a quantitative interpretation of the modal interaction.
The proposed multimodal analysis is experimentally validated. The obtained results show that the derived multimodal models accurately predict the behavior of the transitions. Due to this fact, they can be used for the analysis of circuits and structures composed of three-coupled-strip sections. In this work, the models have been applied to both the EMC and microwave fields. In the former, they have been employed to study the cross-talk and signal-integrity problems in PCB configurations involving tree-coupled-trace sections. The performed analysis has shown that transitions and asymmetries in these circuits must be considered as a source of interference and signal degradation since the modal interaction can be interpreted as an interference process that involves all the present signals. In the latter, a multimodal analysis of spurline filters has been performed. This study has allowed the derivation of two new filter structures whose main feature is their compactness, which, in contrast to other analogous filters, is achieved by allowing the presence of an additional mode in the resonance process. The use of the multimodal models for the analysis of these structures has permitted both a simple interpretation of the filter operation and the derivation of a set of design rules which allows a rapid fine tuning of some filter parameters such as the center frequency and the bandwidth.

Style APA, Harvard, Vancouver, ISO itp.

Choi, Man Soo. "Computer-aided design models for millimeter-wave suspended-substrate microstrip line". Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA227259.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, March 1990.
Thesis Advisor(s): Atwater, H.A. Second Reader: Lee, H. M. "March 1990." Description based on signature page as viewed on August 26, 2009. DTIC Descriptor(s): Strip Transmission Lines, Computer Aided Design, Computerized Simulation, Parameters, Microwave Equipment, Radar, Full Wave Rectifiers, Transmittance, Resonant Frequency, Construction, Wave Propagation, Coefficients, Boundary Value Problems, Resonators, Circuits, Discontinuities, Ka Band, Models, Scattering, Equivalent Circuits, Frequency. Author(s) subject terms: Millimeter wave, suspended substrate, design model. Includes bibliographical references (p. 78-79). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

Imran, Md Asheque. "Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design". Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc801931/.

Pełny tekst źródła

Streszczenie:

The thesis represents the design for dual-band quarter wavelength and half wavelength microstrip transmission line. Chapter 2 proposed the design of a novel dual-band asymmetric pi-shaped short-circuited quarter wavelength microstrip transmission line working at frequencies 1GHz and 1.55 GHz for 50Ω transmission line and at frequencies 1GHz and 1.43GHz for 60Ω transmission line. Chapter 3 proposed the design of a novel dual-band quarter wavelength microstrip transmission line with asymmetrically allocated open stubs and short-circuited stubs working at frequencies 1GHz and 1.32GHz. Chapter 4 proposed the design of dual-band pi-shaped open stub half wavelength microstrip transmission line working at frequencies 1GHz and 2.07GHz. Numerical simulations are performed both in HyperLynx 3D EM and in circuit simulator ADS for all of the proposed designs to measure the return loss (S11) and insertion loss (S12) in dB and phase response for S12 in degree.

Style APA, Harvard, Vancouver, ISO itp.

Tugulea, Alexandru. "Two-dimensional equations for the analysis of microstrip line dispersion and step discontinuities". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0012/NQ53051.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Uzelac, Lawrence Stevan. "A Multiple Coupled Microstrip Transmission Line Model for High-Speed VLSI Interconnect Simulation". PDXScholar, 1991. https://pdxscholar.library.pdx.edu/open_access_etds/4526.

Pełny tekst źródła

Streszczenie:

A model is presented which incorporates the advantages of a mixed mode simulation to characterize transmission line behavior in multiple coupled Transmission line systems. The model is intended for use by digital circuit designers who wish to be able to obtain accurate transmission line behavior for complex digital systems for which continuous time simulation tools such as SPICE would time prohibitive. The model uses a transverse electromagnetic wave approximation to obtain solutions to the basic transmission line equations. A modal analysis technique is used to solve for the attenuation and propagation constants for the transmission lines. Modal analysis done in the frequency domain after a Fast Fourier Transform of the time-domain input signals. Boundary conditions are obtained from the Thevinized transmission line input equivalent circuit and the transmission line output load impedance. The model uses a unique solution queue system that allows n-line coupled transmission lines to be solved without resorting to large order matrix methods or the need to diagonals larger matrices using linear transformations. This solution queue system is based on the method of solution superposition. As a result, the CPU time required for the model is primarily a function of the number of transitions and not the number of lines modeled. Incorporation of the model into event driven circuit simulators such as Network C is discussed. It will be shown that the solution queue methods used in this model make it ideally suited for incorporation into a event-driven simulation network. The model presented in this thesis can be scaled to incorporate direct electromagnetic coupling between first, second, or third lines adjacent to the line transitioning. It is shown that modeling strictly adjacent line coupling is adequate for typical digital technologies. It is shown that the model accurately reproduces the transmission line behavior of systems modeled by previous authors. Example transitions on a 8-line system are reviewed. Finally, future model improvements are discussed.

Style APA, Harvard, Vancouver, ISO itp.

Kemppinen, E. (Esa). "Determination of the permittivity of some dielectrics in the microwave and millimetre wave region". Doctoral thesis, University of Oulu, 1999. http://urn.fi/urn:isbn:9514251954.

Pełny tekst źródła

Streszczenie:

Abstract In the first part of this study, determination of the dielectric properties of the low loss microwave ceramic material, barium nonatitanate (Ba2Ti9O20), around 1 GHz is discussed. The structures under test were coaxial resonators, the cores of which were made of barium nonatitanate and the metallization was realised by thick film silver. The measured value of the real part of the relative dielectric constant was εr = 37 and that of the loss tangent was tan σ = 0.00014. The change of the resonance frequency of the coaxial resonators with temperature, in the range -20 … +80 C, was 4 ppm/ C. In addition, realisation of compact interdigital and comb-line bandpass filters was demonstrated for the 900 MHz mobile phone band. Besides Ba2Ti9O20, Ba(Sm,Nd)2Ti5O14 ceramic material with a dielectric constant of εr = 78 was also employed in order to improve the miniaturisation. The volume of the smallest filter was 2 cm3 and the weight was 9 g. In the second part of this study, various measurement methods have been demonstrated to determine the real part of the relative permittivity of FR4 fibreglass circuit board. Test structures were straight asymmetric open-circuited strip lines. It was found that the real part of the relative permittivity decreased slightly with frequency. At 0.72 GHz and 4.5 GHz, εr values of 4.3 and 4.1, respectively, were measured. All the characterisation methods used gave consistent values for εr, and electromagnetic simulators were used to verify the results. In the third part of this study, the structures under test were microstrip or strip line transmission lines, the S parameters of which were measured by using on-wafer measurement techniques. It was found that the insertion loss of the 10 mm long etched Cu microstrip was slightly less than that of the Ag microstrips which were manufactured by etching and gravure offset printing techniques, respectively. The performance of the Ag microstrips was, however, similar. In addition, a theoretical basis was established for the determination of εr of the dielectric substrate and the attenuation coefficient of the transmission lines under test. The calculations were based on signal flow diagrams. The method was applied to determine the dielectric and loss properties of a commercial, Kyocera, Japan, LTCC (Low Temperature Cofired Ceramic) material up to 50 GHz. The measured value of the real part of the relative permittivity was εr = 5.7, and the loss tangent was approximately tan σ = 0.003. The essential idea behind the studies reported in this thesis was twofold. First, the studies aimed at characterising dielectric media which find usage in the realisation of UHF, microwave or millimetre wave circuits. Second, the studies aimed to obtain data of immediate value in practical design work. For this reason, the structures under test were transmission lines having extensive usage in practical high frequency circuit design.

Style APA, Harvard, Vancouver, ISO itp.

Chiang, Chun Pong. "Design of quasi-elliptic microstrip bandpass filter using terminated anti-parallel coupled-line structure". Thesis, University of Macau, 2007. http://umaclib3.umac.mo/record=b1937941.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "MICROSTRIP LIVE"

Uysal, Sener. Nonuniform line microstrip directional couplers and filters. Boston: Artech House, 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bateman, J. E. Enhancement of x-ray line spectra from gas microstrip detector. Chilton: Rutherford Appleton Laboratory, 2000.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Roma 1629: Una microstoria dell'arte. Roma: Artemide, 2020.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

John-Gwan, Yook, i United States. National Aeronautics and Space Administration., red. Theoretical and experimental study of microstrip-to-slot line uniplanar transition. [Washington, D.C.]: National Aeronautics and Space Administration, 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bateman, J. E. Precision measurement of x-ray line spectra by energy dispersion in a gas microstrip detector. Chilton: Rutherford Appleton Laboratory, 2000.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Biondi, Albano. Modena metropoli dello Stato: Storie e microstorie di primo Seicento. Modena: Archivio storico, 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Accame, Giacomo. Pietra Ligure--: Oltre il tempo : microstoria, folclore, dialetto e album fotografico. Ceriale: Tipografia litografia ligure, 1992.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Francesco, Giacovelli, red. Case & cose del passato a Noci: Dimamiche evolutive del paesaggio urbano : microstorie dell'abitare, del mangiare, dell'arte di vivere della comunità nocese. Fasano (Brindisi): Schena, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Broadband uniplanar microstrip to slot-line transitions. [Washington, DC: National Aeronautics and Space Administration, 1995.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Theoretical and experimental study of microstrip-to-slot line uniplanar transition. [Washington, D.C.]: National Aeronautics and Space Administration, 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "MICROSTRIP LIVE"

Jha, Kumud Ranjan, i Ghanshyam Singh. "Multilayered Microstrip Transmission Line". W Terahertz Planar Antennas for Next Generation Communication, 23–37. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02341-0_2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yip, Peter C. L. "Transmission-line Theory and Microstrips". W High-Frequency Circuit Design and Measurements, 7–30. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-6950-9_2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vladislav Ivanovich, Danilchenko, Danilchenko Yevgenia Vladimirovna i Kureichik Viktor Mikhailovich. "Bioinspired Approach to Microstrip Transmission Line Design". W Software Engineering and Algorithms, 170–79. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77442-4_15.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rathod, S. M., R. N. Awale i K. P. Ray. "Analysis of Circular Microstrip Antenna with Single Shorting Post for 50 Ω Microstrip-Line Feed". W Lecture Notes on Data Engineering and Communications Technologies, 75–83. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8339-6_9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Deshmukh, Sanjay B., i Amit A. Deshmukh. "Microstrip-Line Resonator-Fed Rectangular Microstrip Antenna Using Gap-Coupled Parasitic Semi-circular Shape Patches". W Lecture Notes on Data Engineering and Communications Technologies, 109–18. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6601-8_10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ansari, Mohammad Ahmad, Poonam Agarwal i Krishnan Rajkumar. "Artificial Neural Network (ANN) to Design Microstrip Transmission Line". W Proceedings of International Conference on Artificial Intelligence and Applications, 25–33. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4992-2_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ravelo, Blaise. "Symmetric Tree Interconnects Modeling with Elementary Distributed RC-Line". W Analytical Methodology of Tree Microstrip Interconnects Modelling For Signal Distribution, 107–16. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0552-2_6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yu, Chen’. "Research on Transition Between Substrate Integrated Waveguide and Microstrip Line". W Springer Proceedings in Physics, 203–9. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-58868-7_23.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sarkar, Goffar Ali, i Susanta Kumar Parui. "Microstrip Line Fed Two Element E-Plane HDRA Antenna Array". W Advances in Communication, Devices and Networking, 175–81. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3450-4_20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Xiao, Zhen, Dan Zhang i Weijie Xu. "Electromagnetic Line-Parameters Extracted from Microstrip Lines with Step Discontinuities". W Lecture Notes in Electrical Engineering, 25–33. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4110-4_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "MICROSTRIP LIVE"

Roskos, Hartmut, Martin C. Nuss, Keith W. Goossen, David W. Kisker, Ben Tell, Alice E. White, Ken T. Short, Dale C. Jacobson i John M. Poate. "Propagation of 100 GHz bandwidth electrical pulses on a microstrip line with buried silicide groundplane". W Picosecond Electronics and Optoelectronics. Washington, D.C.: Optica Publishing Group, 1991. http://dx.doi.org/10.1364/peo.1991.wb4.

Pełny tekst źródła

Streszczenie:

Microstrip transmission lines consisting of a narrow center line and an extended groundplane are the most commonly used device interconnections in millimeter-wave integrated circuits. Typically, the ground plane of a microstrip line is located on the backside of the roughly 500 µm thick semiconductor wafer that carries the circuit elements. For frequencies above 10 GHz, this simple scheme can lead to a limitation of the useful bandwidth of ultra-high-speed electronic circuits because dispersion can significantly distort the electrical pulses propagating on the microstrip interconnect [Goossen, 1989]. Recently, it has been proposed to use buried silicide layers as groundplanes for microstrip lines in silicon based circuits [Goossen, 1990]; the resulting reduction in the separation of the center conductor and the ground plane should push the onset of the dispersion to frequencies above the range of interest. For a separation of 10 pm the dispersion should be negligible for frequencies up to 500 GHz. Here, we test this concept by studying the propagation of 100 GHz bandwidth electrical pulses on microstrip lines that have been fabricated on silicon wafers with buried and with conventionally formed groundplanes.

Style APA, Harvard, Vancouver, ISO itp.

Chai, Liang, Aziz Shaikh i Vern Stygar. "Characterization of A6 LTCC Systems for Microwave and Millimeter-Wave Applications". W ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35134.

Pełny tekst źródła

Streszczenie:

Low Temperature Co-fired Ceramic (LTCC) materials are widely used in ceramic packaging and interconnect applications, such as RF receiving modules for next generation handsets and T/R modules for satellite communications. The application frequency spans from low GHz to 100+ GHz. A variety of techniques must be used to characterize dielectric properties (loss tangent and dielectric constant) of LTCC in the wide frequency range. These techniques include the parallel plate capacitor method from DC to several MHz, cavity methods in x-band, and open resonator techniques for frequencies up to 100+ GHz. LTCC is a multi-layer ceramic technology, which offers capability for low cost manufacturing, realizing 3D structures, and embedding passive components. Both strip line and microstrip types of transmission line structures can be conveniently manufactured using LTCC material systems. As an important performance parameter, microstrip loss can be characterized using the ring resonator technique. Both LTCC and metal conductors contribute to the microstrip loss. At microwave and mm-wave frequencies, metal losses become significant, although low resistance silver conductor can be used. The metal loss may be divided into two categories: one is the resistive loss and other is surface roughness loss. A photo imaging technique has been introduced which patterns the microstrip, reducing the surface loss. In this paper, the techniques for measuring both dielectric properties of A6 LTCC and microstrip properties of A6 LTCC with conductor systems will be reviewed. Characterization results of the dielectric constant and loss tangent of A6 from near DC to 100 GHz will be presented. Microstrip losses, measured for A6 LTCC with both gold and silver metallization up to 40 GHz, are compared to those computed using the closed form equations and experimentally determined dielectric and conductor properties. The calculated effective microstrip permitivity and attenuation compare well to those from measurements.

Style APA, Harvard, Vancouver, ISO itp.

Lu, H. J., Y. X. Guo, K. Faeyz, C. K. Cheng i J. Wei. "Liquid Crystal Polymer (LCP) for Characterization of Millimer-Wave Transmission Lines and Bandpass Filters". W ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10573.

Pełny tekst źródła

Streszczenie:

In this paper, a multi-layer LCP substrate fabrication process was described and millimeter wave transmission lines and filters were designed and fabricated on the LCP substrate. Various transitions from a CPW to a microstrip line with their characteristic impedance being 50 ohms were investigated. The characteristics of the wirebonding assembly for connecting two transmission lines was also examined. The measurement results show that an insertion loss of 1.3 dB at 60 GHz can be achieved for the two-wire bonding trasmisssion line including two transitions from a CPW to a microstrip line.

Style APA, Harvard, Vancouver, ISO itp.

Hatefi-Aradakani, Hossein, i Jalil Rashed-Mohassel. "Pseudochiral microstrip line". W 2009 Asia Pacific Microwave Conference - (APMC 2009). IEEE, 2009. http://dx.doi.org/10.1109/apmc.2009.5384140.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Mbanya Tchafa, Franck, Jun Yao i Haiying Huang. "Wireless Interrogation of a High Temperature Antenna Sensor Without Electronics". W ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65954.

Pełny tekst źródła

Streszczenie:

This paper presents a novel interrogation mechanism for an antenna sensor subjected to high temperatures. In sensor node, an Ultra-wide Band (UWB) microstrip antenna was used as a wireless Tx/Rx transceiver to amplify the reflected interrogation signal from the temperature-sensing element, i.e. the patch antenna-sensor. A microstrip delay line was used to connect the Tx/Rx antenna and the antenna-sensor so that the reflected signal from the sensor node is delayed and can be separated from the background clutter using time-domain (T-D) gating technique. In this paper, the principle of operation of the proposed interrogation mechanism is first discussed, followed by the design and simulations of the sensor node circuitry. Finally, a temperature test was conducted to validate the wireless temperature sensing performance of the antenna sensor.

Style APA, Harvard, Vancouver, ISO itp.

Jen-Yea Jan, Jen-Ho Yen i Hua-Ming Chen. "Microstrip-line-fed snail-like slot antenna for ultra-wideband operation". W 2009 13th International Symposium on Antenna Technology and Applied Electromagnetics and the Canadian Radio Science Meeting (ANTEM/URSI 2009). IEEE, 2009. http://dx.doi.org/10.1109/antemursi.2009.4805074.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cheo, P. K. "A Tunable IR Laser Source for Remote Sensing". W Optical Remote Sensing of the Atmosphere. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/orsa.1990.md19.

Pełny tekst źródła

Streszczenie:

Frequency tuned IR laser sources can be achieved by generating the upper and the lower sidebands from a CO2 laser using an electrooptic phase modulator. The phase modulator, which is driven by a microwave TWT amplifier in the X and Ku bands (8 to 18 GHz) can be made of either a GaAs IR waveguide with a traveling-wave microstrip transmission line (Ref. 1) or a bulk CdTe crystal filled microwave cavity operating in a resonant mode (Ref. 2). The difference between the two approaches is primarily in the achievable frequency tuning range. With a microstrip IR waveguide modulator, the frequency tuning range of 20 GHz, which is at least 20 times wider than that obtainable with a bulk crystal filled microwave cavity can be achieved. The sideband powers of comparable magnitudes (~ 2mW) can be generated by using either of the above two techniques.

Style APA, Harvard, Vancouver, ISO itp.

Wenwen Yang i Jianyi Zhou. "A single layer wideband low profile tooth-like-slot microstrip patch antenna fed by inset microstrip line". W 2013 International Workshop on Antenna Technology (iWAT). IEEE, 2013. http://dx.doi.org/10.1109/iwat.2013.6518342.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lyons, W. Gregory. "High-Frequency Analog Signal Processing With High-Temperature Superconductors*". W Picosecond Electronics and Optoelectronics. Washington, D.C.: Optica Publishing Group, 1991. http://dx.doi.org/10.1364/peo.1991.fa2.

Pełny tekst źródła

Streszczenie:

The low conductor loss of superconducting materials makes it possible to build passive microwave devices that cannot be built with normal metal conductors. For example, compact transversal filters in the form of tapped delay lines can be fabricated from superconducting niobium to operate with multi-gigahetz signal processing bandwidths [1,2]. Recent advances in the growth of thin films of the high-temperature superconductor (HTS) Y-Ba-Cu-O [3,4] have made possible the demonstration of a variety of passive microwave devices. This includes long delay lines [5], tapped delay line filters [6], and narrow-band microstrip bandpass filters using edge-coupled resonators [5]. The most notable of these demonstations has been the operation of a 2.6-GHz bandwidth stripline chirp filter with 12 ns of total delay and a Y-Ba-Cu-O patterned line length of 0.7 m. The HTS microwave components crucial to this development were long delay lines with more than 10 ns of delay, impedance transformers, and backward-wave couplers. Microstrip, coplanar, and stripline geometries were all examined during the course of this development. The stripline configuration selected for the chirp filter was developed using microwave CAD routines and superconducting niobium prototypes.

Style APA, Harvard, Vancouver, ISO itp.

Wu, Xin, Omar M. Ramahi, Gary A. Brist i Donald P. Cullen. "Surface Finish Effects on High-Speed Interconnects". W ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35332.

Pełny tekst źródła

Streszczenie:

In printed circuit boards (PCB), the selection of surface finish is a balance of cost, performance and material compatibility consideration. When the operating frequency is in gigahertz range, the signal loss in interconnects has stronger dependence on the material composition of traces, surface finishes, substrates, and geometry of the traces. Skin effects, frequency dependent dielectric properties and the electrical functioning mechanism are important factors that affect signal integrity. In this work, both measurements and finite element method (FEM) based full wave simulation are used to investigate the effects of hot air solder leveling (HASL) and its alternatives on signal degradation of high-speed interconnect structures. For the microstrip line structure, the loss due to surface finishes is negligible. For the differential mode coupled microstrip lines, the loss increment resulted from surface finish can be up to 50%∼200% at 10 GHz. Surface finish caused signal loss must be carefully considered for differential mode interconnects.

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "MICROSTRIP LIVE"

Uzelac, Lawrence. A Multiple Coupled Microstrip Transmission Line Model for High-Speed VLSI Interconnect Simulation. Portland State University Library, styczeń 2000. http://dx.doi.org/10.15760/etd.6410.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!