Gotowa bibliografia na temat „Microscale fabrication process”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Microscale fabrication process”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Microscale fabrication process"
Ghaznavi, Amirreza, Jie Xu i Seth A. Hara. "A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds". Micromachines 14, nr 7 (30.06.2023): 1363. http://dx.doi.org/10.3390/mi14071363.
Pełny tekst źródłaBley, P. "The Liga Process for Fabrication of Three-Dimensional Microscale Structures". Interdisciplinary Science Reviews 18, nr 3 (wrzesień 1993): 267–72. http://dx.doi.org/10.1179/isr.1993.18.3.267.
Pełny tekst źródłaSugimoto, Ryota, Ju Hun Lee, Ju-Hyuck Lee, Hyo-Eon Jin, So Young Yoo i Seung-Wuk Lee. "Bacteriophage nanofiber fabrication using near field electrospinning". RSC Advances 9, nr 67 (2019): 39111–18. http://dx.doi.org/10.1039/c9ra07510k.
Pełny tekst źródłaKim, Kangil, Jae Keun Lee, Seung Ju Han i Sangmin Lee. "A Novel Top-Down Fabrication Process for Vertically-Stacked Silicon-Nanowire Array". Applied Sciences 10, nr 3 (8.02.2020): 1146. http://dx.doi.org/10.3390/app10031146.
Pełny tekst źródłaBunea, Ada-Ioana, Nuria del Castillo Iniesta, Ariadni Droumpali, Alexandre Emmanuel Wetzel, Einstom Engay i Rafael Taboryski. "Micro 3D Printing by Two-Photon Polymerization: Configurations and Parameters for the Nanoscribe System". Micro 1, nr 2 (25.09.2021): 164–80. http://dx.doi.org/10.3390/micro1020013.
Pełny tekst źródłaChoi, Jinwoong, Myeonghyeon Cho i Bumjoo Kim. "Fabrication of Nonconductive Microscale Patterns on Ion Exchange Membrane by Laser Process". Korean Journal of Materials Research 33, nr 2 (27.02.2023): 71–76. http://dx.doi.org/10.3740/mrsk.2023.33.2.71.
Pełny tekst źródłaYang, Zhuo Qing, Hong Wang, Zheng Jie Zhang, Gui Fu Ding, Xiao Lin Zhao i Chun Yan Jiang. "Fabrication and Mechanical Characterization of a Microscale Electrophoretic Polymer Based on MEMS Technology". Advanced Materials Research 422 (grudzień 2011): 375–78. http://dx.doi.org/10.4028/www.scientific.net/amr.422.375.
Pełny tekst źródłaTang, Min Jin, Hui Min Xie, Jian Guo Zhu, Peng Wan Chen, Qing Ming Zhang i Xiao Jun Li. "A New Moiré Grating Fabrication Technique Using Hot Embossing Lithography". Applied Mechanics and Materials 83 (lipiec 2011): 7–12. http://dx.doi.org/10.4028/www.scientific.net/amm.83.7.
Pełny tekst źródłaHerrera-Loya, Maite R., L. Mariana Cervantes-Herrera, Sofia Gutierrez-Vallejo i Jorge G. Ibanez. "Leaded or unleaded? Homemade microscale tin electroplating". Chemistry Teacher International 4, nr 1 (1.03.2022): 97–102. http://dx.doi.org/10.1515/cti-2021-0024.
Pełny tekst źródłaPark, Seorin, Da Young Lee i Sunghun Cho. "Development of Light-Scribing Process Using L-Ascorbic Acid for Graphene Micro-Supercapacitor". Micromachines 15, nr 7 (30.06.2024): 858. http://dx.doi.org/10.3390/mi15070858.
Pełny tekst źródłaRozprawy doktorskie na temat "Microscale fabrication process"
Young-Waithe, Karen (Karen A. ). 1960. "Process design, development and fabrication of InAs homojunction converter cells for microscale thermophotovoltaic application". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/86597.
Pełny tekst źródłaIncludes bibliographical references (p. 179-182).
by Karen Young-Waithe.
S.M.
Hem, Sopheasith. "Nonlinear epitaxial functional oxide-based resonant sensors". Electronic Thesis or Diss., université Paris-Saclay, 2023. http://www.theses.fr/2023UPAST220.
Pełny tekst źródłaThe detection of weak magnetic field signals has gained significant attention for its potential applications in fields such as medicine, geophysics, and nanotechnology. Various methods, including Superconducting Quantum Interference Devices (SQUIDs), optically pumped magnetometers (diamond sensors), and magnetoelectric (ME) resonators, have been used to enhance the detection of these weak signals. The choice of detection method depends on factors such as application context, available resources, cost, and sensitivity requirements. Among these methods, MEMS ME resonator-based sensors have garnered attention due to their design flexibility, compactness, and compatibility with integrated circuits. In these microscale resonators, the interaction between magnetostrictive and piezoelectric thin films enables a strain-mediated effect at micro- and nano-scales, resulting in high precision and spatial-temporal resolution. The thesis delves into the nonlinear regime in resonator operation, characterized by nonlinearity in vibrational responses, including asymmetrical peak shapes, multivalued responses, bifurcations, and nonlinear resonances. The nonlinear regime, particularly bifurcation, promises enhanced sensing capabilities and analog operation modes by sweeping the excitation frequency. Despite challenges like noise-activated stochastic switching, the nonlinear regime is valuable for detecting weak signals. Bistability in resonators within the nonlinear regime, underutilized in piezoelectric configurations, is explored. A proof-of-concept device quantifies signal changes through jumping frequency. Mathematically, differential equations are transformed into normalized Duffing equations using Galerkin's method, enabling dynamic behaviors to manifest through coefficients. Distinct models accommodate various conditions and assumptions, revealing connections between mechanical parameters and normalized coefficients in linear and nonlinear regimes. Bridging the gap between vibrational amplitude-based models and impedance data is complex but achievable. Experiments and iterative model refinement provide insights into frequency responses. Limitations regarding the neutral axis in monolayer thin films are acknowledged, with suggestions to reevaluate assumptions, consider multilayer effects, and employ numerical simulations. A relative neutral axis concept is introduced, transparently justified, and aligned with observed experimental behavior. The nonlinear regime widens resonance peaks, enhancing sensitivity in magnetic field detection. Parameters like piezoelectric and dielectric coefficients influence the transition to the nonlinear regime. The research extends beyond ideal scenarios, requiring further investigation to replicate the bifurcation regime under different conditions. In parallel, the fabrication of PZT-based microcantilevers, vital components of the resonant sensor, underwent multiple iterations to address challenges. These iterative improvements resulted in a more robust and reliable fabrication process. In conclusion, this study advanced the understanding of piezoelectrically actuated resonators and their potential applications in weak signal detection. The iterative fabrication enhancements and mathematical models contributed to the development of multifunctional sensing devices. The research also emphasized the importance of bridging the gap between vibrational amplitude-based models and impedance data. Finally, it shed light on the intricate interplay of nonlinearity and resonance in resonator systems, providing insights for future investigations and practical applications
Części książek na temat "Microscale fabrication process"
Simpson, Michael L., i Gary S. Sayler. "The Device Science of Whole Cells as Components in Microscale and Nanoscale Systems". W Cellular Computing. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780195155396.003.0009.
Pełny tekst źródłaHuang, Weidong, Zihan Wang, Bo Wang, Xianli Liu i Xiaoju Lu. "Implant Development Using 3D Printing with Polylactic Acid-Based Polymer". W Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230027.
Pełny tekst źródłaStreszczenia konferencji na temat "Microscale fabrication process"
Dash, Susmita, Niru Kumari, Mercy Dicuangco i Suresh V. Garimella. "Single-Step Fabrication and Characterization of Ultrahydrophobic Surfaces With Hierarchical Roughness". W ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/ipack2011-52046.
Pełny tekst źródłaSherehiy, Andriy, Andres Montenegro, Danming Wei i Dan O. Popa. "Adhesive Deposition Process Characterization for Microstructure Assembly". W ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63929.
Pełny tekst źródłaDiBartolomeo, Franklin J., i Christine A. Trinkle. "High Throughput Continuous Fabrication of Large Surface Area Microstructured PDMS". W ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10383.
Pełny tekst źródłaBastwros, Mina, Miao Liu, Nicholas Orlowsky i Gap-Yong Kim. "Effects of Reinforcement Particle Size on Cold Roll Bonded (CRB) Al1100 Laminate Composites". W ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9469.
Pełny tekst źródłaKhuushi, Sanjay Kumar Srinivasan, Chandantaru Dey Modak, Arvind Kumar, Abinash Tripathy i Prosenjit Sen. "A Maskless Process for Fabrication of Patterned Surfaces with Microscale Superhydrophobic Borders for High Throughput Droplet Microarray Printing". W 2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2019. http://dx.doi.org/10.1109/memsys.2019.8870702.
Pełny tekst źródłaRen, Jing, i Sriram Sundararajan. "Microfluidic Channel Fabrication With Tailored Wall Roughness". W ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7328.
Pełny tekst źródłaThorsen, Todd A. "Microfluidic Logic: Addressing Complexity at the Microscale". W ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42982.
Pełny tekst źródłaRoy, Nilabh, Obehi Dibua, Chee Seng Foong i Michael Cullinan. "Preliminary Results on the Fabrication of Interconnect Structures Using Microscale Selective Laser Sintering". W ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2017 Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ipack2017-74173.
Pełny tekst źródłaOk, Jeong Tae, Eugene Lopez-On˜a, Daniel Sang-Won Park, Harris Wong i Sunggook Park. "Fabrication of 3-D Superhydrophobic Micro-Ratchets via Combined Thermal Imprint Lithography and Photolithography". W ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67880.
Pełny tekst źródłaLee, Choongyeop, i Chang-Jin “C J. ”. Kim. "Fabrication of Superhydrophobic Microstructures With Nanostructured Sidewalls Designed to Maximize Giant Liquid Slip". W ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18535.
Pełny tekst źródła