Gotowa bibliografia na temat „Microfabricati”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Microfabricati”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Microfabricati"
De Maria, C., L. Grassi, F. Vozzi, A. Ahluwalia i G. Vozzi. "Development of a novel micro-ablation system to realise micrometric and well-defined hydrogel structures for tissue engineering applications". Rapid Prototyping Journal 20, nr 6 (20.10.2014): 490–98. http://dx.doi.org/10.1108/rpj-03-2012-0022.
Pełny tekst źródłaDu, L. Q., C. Liu, H. J. Liu, J. Qin, N. Li i Rui Yang. "Design and Fabrication of Micro Hot Embossing Mold for Microfluidic Chip Used in Flow Cytometry". Key Engineering Materials 339 (maj 2007): 246–51. http://dx.doi.org/10.4028/www.scientific.net/kem.339.246.
Pełny tekst źródłaBanerjee, Arunav S., Richard Blaikie i Wen Hui Wang. "Microfabrication Process for XYZ Stage-Needle Assembly for Cellular Delivery and Surgery". Materials Science Forum 700 (wrzesień 2011): 195–98. http://dx.doi.org/10.4028/www.scientific.net/msf.700.195.
Pełny tekst źródłaFolch, A., A. Ayon, O. Hurtado, M. A. Schmidt i M. Toner. "Molding of Deep Polydimethylsiloxane Microstructures for Microfluidics and Biological Applications". Journal of Biomechanical Engineering 121, nr 1 (1.02.1999): 28–34. http://dx.doi.org/10.1115/1.2798038.
Pełny tekst źródłaPARK, W. B., J. H. CHOI, C. W. PARK, G. M. KIM, H. S. SHIN, C. N. CHU i B. H. KIM. "FABRICATION OF MICRO PROBE-TYPE ELECTRODES FOR MICROELECTRO-CHEMICAL MACHINING USING MICROFABRICATION". International Journal of Modern Physics B 24, nr 15n16 (30.06.2010): 2639–44. http://dx.doi.org/10.1142/s0217979210065398.
Pełny tekst źródłaStarodubov, Andrey, Roman Torgashov, Viktor Galushka, Anton Pavlov, Vladimir Titov, Nikita Ryskin, Anand Abhishek i Niraj Kumar. "Microfabrication, Characterization, and Cold-Test Study of the Slow-Wave Structure of a Millimeter-Band Backward-Wave Oscillator with a Sheet Electron Beam". Electronics 11, nr 18 (9.09.2022): 2858. http://dx.doi.org/10.3390/electronics11182858.
Pełny tekst źródłaLiu, Yue, Megan Chesnut, Amy Guitreau, Jacob Beckham, Adam Melvin, Jason Eades, Terrence R. Tiersch i William Todd Monroe. "Microfabrication of low-cost customisable counting chambers for standardised estimation of sperm concentration". Reproduction, Fertility and Development 32, nr 9 (2020): 873. http://dx.doi.org/10.1071/rd19154.
Pełny tekst źródłaAlvarez-Escobar, Marta, Sidónio C. Freitas, Derek Hansford, Fernando J. Monteiro i Alejandro Pelaez-Vargas. "Soft Lithography and Minimally Human Invasive Technique for Rapid Screening of Oral Biofilm Formation on New Microfabricated Dental Material Surfaces". International Journal of Dentistry 2018 (2018): 1–5. http://dx.doi.org/10.1155/2018/4219625.
Pełny tekst źródłaCreff, Justine, Laurent Malaquin i Arnaud Besson. "In vitro models of intestinal epithelium: Toward bioengineered systems". Journal of Tissue Engineering 12 (styczeń 2021): 204173142098520. http://dx.doi.org/10.1177/2041731420985202.
Pełny tekst źródłaYang, Jian Zhong, Li Chao Pan, C. L. Kang, Gang Liu, Hui Juan Li, Z. You, D. H. Ren i Y. C. Tian. "Advance of the Micro-Magnetometer MEMSMag Research". Advanced Materials Research 60-61 (styczeń 2009): 241–45. http://dx.doi.org/10.4028/www.scientific.net/amr.60-61.241.
Pełny tekst źródłaRozprawy doktorskie na temat "Microfabricati"
Feng, Chunhua. "Microfabrication-compatible synthesis strategies for nanoscale electrocatalysts in microfabricated fuel cell applications /". View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?CENG%202007%20FENG.
Pełny tekst źródłaCannon, Andrew Hampton. "Unconventional Microfabrication Using Polymers". Thesis, Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/19845.
Pełny tekst źródłaBarham, Oliver M. "Microfabricated Bulk Piezoelectric Transformers". Thesis, University of Maryland, College Park, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10615552.
Pełny tekst źródłaPiezoelectric voltage transformers (PTs) can be used to transform an input voltage into a different, required output voltage needed in electronic and electro- mechanical systems, among other varied uses. On the macro scale, they have been commercialized in electronics powering consumer laptop liquid crystal displays, and compete with an older, more prevalent technology, inductive electromagnetic volt- age transformers (EMTs). The present work investigates PTs on smaller size scales that are currently in the academic research sphere, with an eye towards applications including micro-robotics and other small-scale electronic and electromechanical sys- tems. PTs and EMTs are compared on the basis of power and energy density, with PTs trending towards higher values of power and energy density, comparatively, indicating their suitability for small-scale systems. Among PT topologies, bulk disc-type PTs, operating in their fundamental radial extension mode, and free-free beam PTs, operating in their fundamental length extensional mode, are good can- didates for microfabrication and are considered here. Analytical modeling based on the Extended Hamilton Method is used to predict device performance and integrate mechanical tethering as a boundary condition. This model differs from previous PT models in that the electric enthalpy is used to derive constituent equations of motion with Hamilton’s Method, and therefore this approach is also more generally applica- ble to other piezoelectric systems outside of the present work. Prototype devices are microfabricated using a two mask process consisting of traditional photolithography combined with micropowder blasting, and are tested with various output electri- cal loads. 4mm diameter tethered disc PTs on the order of .002cm
3 , two orders smaller than the bulk PT literature, had the followingperformance: a prototype with electrode area ratio (input area / output area) = 1 had peak gain of 2.3 (± 0.1), efficiency of 33 (± 0.1)% and output power density of 51.3 (± 4.0)W cm
-3 (for output power of80 (± 6)mW) at 1M? load, for an input voltage range of 3V-6V (± one standard deviation). The gain results are similar to those of several much larger bulk devices in the literature, but the efficiencies of the present devices are lower. Rectangular topology, free-free beam devices were also microfabricated across 3 or- ders of scale by volume, with the smallest device on the order of .00002cm
3 . These devices exhibited higher quality factorsand efficiencies, in some cases, compared to circular devices, but lower peak gain (by roughly 1/2 ). Limitations of the microfab- rication process are determined, and future work is proposed. Overall, the devices fabricated in the present work show promise for integration into small-scale engi- neered systems, but improvements can be made in efficiency, and potentially voltage gain, depending on the application
Mehregany, Mehran. "Microfabricated silicon electric mechanisms". Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14042.
Pełny tekst źródłaIncludes bibliographical references (leaves 151-156).
by Mehran Mehregany.
Ph.D.
Florian, Baron Camilo. "Laser direct-writing for microfabrication". Doctoral thesis, Universitat de Barcelona, 2016. http://hdl.handle.net/10803/400403.
Pełny tekst źródłaLa fabricació digital de dispositius tecnològics requereix el desenvolupament de noves i millors tècniques per al microprocessament de materials que al mateix temps siguin compatibles amb mètodes de producció en sèrie a gran escala com el roll-to-roll processing. Aquestes tècniques han de complir certs requisits relacionats amb la possibilitat de realitzar canvis de disseny ràpids durant el procés de fabricació, alta velocitat de processament, i al mateix temps permetre la producció de motius de forma controlada amb altes resolucions espacials. En la present tesi es proposen i implementen solucions viables a alguns dels reptes presents a la microfabricació amb làser tant substractiva com additiva. D'una banda, es presenta un nou mètode d'enfocament del feix làser sobre la mostra per l'ablació superficial de materials transparents que permet obtenir resolucions espacials que superen el límit de difracció del dispositiu òptic. D'altra banda, es duu a terme un estudi de la dinàmica de la impressió de líquids mitjançant làser a alta velocitat, de gran interès de cara a la implementació industrial de la tècnica. A més, es presenten estratègies d'impressió de tintes conductores amb l'objectiu de produir línies contínues amb alta qualitat d'impressió. Finalment s'inclouen dues propostes que són producte de la combinació d’ambues tècniques, la impressió de líquids i l'ablació amb làser.
Jeffery, Nicholas Toby. "PET radiochemistry on microfabricated devices". Thesis, Imperial College London, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.420892.
Pełny tekst źródłaVelásquez, García Luis Fernando 1976. "A microfabricated colloid thruster array". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/82201.
Pełny tekst źródłaLubratt, Mark Paul. "A voltage-tunable microfabricated accelerometer". Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/37497.
Pełny tekst źródłaHarris, Robert Michael. "Geometric simulation of microfabricated structures". Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/11842.
Pełny tekst źródłaIncludes bibliographical references (p. 295-302).
Robert Michael Harris.
Ph.D.
Wang, Weihua. "Tools for flexible electrochemical microfabrication /". Thesis, Connect to this title online; UW restricted, 2002. http://hdl.handle.net/1773/9854.
Pełny tekst źródłaKsiążki na temat "Microfabricati"
Kordal, Richard, Arthur Usmani i Wai Tak Law, red. Microfabricated Sensors. Washington, DC: American Chemical Society, 2002. http://dx.doi.org/10.1021/bk-2002-0815.
Pełny tekst źródłaFranssila, Sami. Introduction to Microfabrication. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9781119990413.
Pełny tekst źródłaSugioka, Koji, Michel Meunier i Alberto Piqué, red. Laser Precision Microfabrication. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-10523-4.
Pełny tekst źródłaChakraborty, Suman, red. Microfluidics and Microfabrication. Boston, MA: Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-1543-6.
Pełny tekst źródłaJ, Jackson Mark, red. Microfabrication and nanomanufacturing. Boca Raton, FL: Taylor & Francis, 2005.
Znajdź pełny tekst źródłaFranssila, Sami. Introduction to Microfabrication. New York: John Wiley & Sons, Ltd., 2005.
Znajdź pełny tekst źródłaChakraborty, Suman. Microfluidics and Microfabrication. Boston, MA: Springer Science+Business Media, LLC, 2010.
Znajdź pełny tekst źródłaNarayanan, Sundararajan, red. Microfabrication for microfluidics. Boston: Artech House, 2010.
Znajdź pełny tekst źródłaIntroduction to microfabrication. Wyd. 2. Chichester, West Sussex, England: John Wiley & Sons, 2010.
Znajdź pełny tekst źródłaMichel, Meunier, Piqué Alberto i SpringerLink (Online service), red. Laser Precision Microfabrication. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2010.
Znajdź pełny tekst źródłaCzęści książek na temat "Microfabricati"
Adams, Thomas M., i Richard A. Layton. "Microfabrication laboratories". W Introductory MEMS, 371–403. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-09511-0_13.
Pełny tekst źródłaLeitão, Diana C., José Pedro Amaral, Susana Cardoso i Càndid Reig. "Microfabrication Techniques". W Giant Magnetoresistance (GMR) Sensors, 31–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-37172-1_2.
Pełny tekst źródłaShoji, Satoru, i Kyoko Masui. "Nano-/Microfabrication". W Encyclopedia of Polymeric Nanomaterials, 1–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36199-9_108-2.
Pełny tekst źródłaJohnstone, Robert W., i M. Parameswaran. "Microfabrication Processes". W An Introduction to Surface-Micromachining, 9–28. Boston, MA: Springer US, 2004. http://dx.doi.org/10.1007/978-1-4020-8021-0_2.
Pełny tekst źródłaShoji, Satoru, i Kyoko Masui. "Nano-/Microfabrication". W Encyclopedia of Polymeric Nanomaterials, 1311–17. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-29648-2_108.
Pełny tekst źródłaOno, Takahito, i Masayoshi Esashi. "Microfabricated Probe Technology". W Encyclopedia of Nanotechnology, 2167–78. Dordrecht: Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-94-017-9780-1_247.
Pełny tekst źródłaJuarez-Martinez, Gabriela, Alessandro Chiolerio, Paolo Allia, Martino Poggio, Christian L. Degen, Li Zhang, Bradley J. Nelson i in. "Microfabricated Probe Technology". W Encyclopedia of Nanotechnology, 1406–15. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_247.
Pełny tekst źródłaBaborowski, J. "Microfabrication of Piezoelectric MEMS". W Electroceramic-Based MEMS, 325–59. Boston, MA: Springer US, 2005. http://dx.doi.org/10.1007/0-387-23319-9_13.
Pełny tekst źródłaJiménez-Martínez, Ricardo, i Svenja Knappe. "Microfabricated Optically-Pumped Magnetometers". W Smart Sensors, Measurement and Instrumentation, 523–51. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-34070-8_17.
Pełny tekst źródłaQin, Dong, Younan Xia, John A. Rogers, Rebecca J. Jackman, Xiao-Mei Zhao i George M. Whitesides. "Microfabrication, Microstructures and Microsystems". W Topics in Current Chemistry, 1–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/3-540-69544-3_1.
Pełny tekst źródłaStreszczenia konferencji na temat "Microfabricati"
Levitan, Jeremy A., Dan Good, Michael J. Sinclair i Joseph M. Jacobson. "Creation of Nanometer-Sized Features in Polysilicon Using Fusing". W ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/mems-23858.
Pełny tekst źródłaPark, Daniel S., Saade Bou-Mikael, Sean King, Karsten E. Thompson, Clinton S. Willson i Dimitris E. Nikitopoulos. "Design and Fabrication of Rock-Based Micromodel". W ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88501.
Pełny tekst źródłaKandra, Deepak, i Ram V. Devireddy. "On the Possible Application of a Microscale Thermocouple to Measure Intercellular Ice Formation in Cells Embedded in an Extracellular Matrix". W ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60728.
Pełny tekst źródłaDemiri, S., i S. Boedo. "Clearance Effects on the Impact Behavior of Large Aspect Ratio Silicon Journal Microbearings". W STLE/ASME 2010 International Joint Tribology Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ijtc2010-41189.
Pełny tekst źródłaCarretero, J. A., i K. S. Breuer. "Measurement and Modeling of the Flow Characteristics of Micro Disc Valves". W ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1120.
Pełny tekst źródłaShao, Zhanjie, Carolyn L. Ren i Gerry Schneider. "Control of Laminar Flow and Mass Transport in Crossing Linked Microchannels for Micro Fabrication". W ASME 3rd International Conference on Microchannels and Minichannels. ASMEDC, 2005. http://dx.doi.org/10.1115/icmm2005-75021.
Pełny tekst źródłaHsu, C. P., N. E. Jewell-Larsen, A. C. Rollins, I. A. Krichtafovitch, S. W. Montgomery, J. T. Dibene i A. V. Mamishev. "Miniaturization of Electrostatic Fluid Accelerators". W ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13990.
Pełny tekst źródłaKo, Jong Soo, Young-Ho Cho, Byung Man Kwak i Kwanhum Park. "Design and Fabrication of Piezoresistive Cantilever Microaccelerometer Arrays With a Symmetrically Bonded Proof-Mass". W ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1267.
Pełny tekst źródłaWang, Yaqiang, i Massood Tabib-Azar. "Fabrication and Characterization of Evanescent Microwave Probes Compatible With Atomic Force Microscope for Scanning Near-Field Microscopy". W ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33291.
Pełny tekst źródłaMu¨ller, Norbert, i Luc G. Fre´chette. "Performance Analysis of Brayton and Rankine Cycle Microsystems for Portable Power Generation". W ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39628.
Pełny tekst źródłaRaporty organizacyjne na temat "Microfabricati"
Jau, Yuan-Yu. Microfabricated Waveguide Atom Traps. Office of Scientific and Technical Information (OSTI), wrzesień 2017. http://dx.doi.org/10.2172/1396077.
Pełny tekst źródłaWoodard, David W. Microfabrication Technology for Photonics. Fort Belvoir, VA: Defense Technical Information Center, czerwiec 1990. http://dx.doi.org/10.21236/ada225428.
Pełny tekst źródłaJames C. Lund. Microfabricated Solid State Neutron Generators. Office of Scientific and Technical Information (OSTI), listopad 2000. http://dx.doi.org/10.2172/791322.
Pełny tekst źródłaJames C. Lund. Microfabricated Solid State Neutron Generators. Office of Scientific and Technical Information (OSTI), wrzesień 2001. http://dx.doi.org/10.2172/791324.
Pełny tekst źródłaSpahn, Olga Blum, Adam M. Rowen, Michael Joseph Cich, Gregory Merwin Peake, Christian L. Arrington, Thomas J. Nash, John Frederick Klem i Dustin Heinz Romero. Microfabricated wire arrays for Z-pinch. Office of Scientific and Technical Information (OSTI), październik 2008. http://dx.doi.org/10.2172/945909.
Pełny tekst źródłaBandyopadhyay, P. R. A Microfabricated Surface for Turbulence Control. Fort Belvoir, VA: Defense Technical Information Center, listopad 1993. http://dx.doi.org/10.21236/ada637044.
Pełny tekst źródłaPitts, W. K., K. M. Walsh, H. L. Cox i Jr. Development of Microfabricated Radiation Sensor Systems. Fort Belvoir, VA: Defense Technical Information Center, listopad 2000. http://dx.doi.org/10.21236/ada392846.
Pełny tekst źródłaCowan, Benjamin M. Microfabrication of Laser-Driven Accelerator Structures. Office of Scientific and Technical Information (OSTI), kwiecień 2003. http://dx.doi.org/10.2172/812999.
Pełny tekst źródłaRevelle, Melissa. Microfabricated Devices and Ion Trapping Capabilities. Office of Scientific and Technical Information (OSTI), lipiec 2022. http://dx.doi.org/10.2172/1876626.
Pełny tekst źródłaSASAKI, DARRYL Y., JULIE A. LAST, BRUCE BONDURANT, TINA A. WAGGONER, C. JEFFREY BRINKER, SHANALYN A. KEMME, JOEL R. WENDT i in. Nanostructured Materials Integrated in Microfabricated Optical Devices. Office of Scientific and Technical Information (OSTI), grudzień 2002. http://dx.doi.org/10.2172/808600.
Pełny tekst źródła