Gotowa bibliografia na temat „Method of lines”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Method of lines”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Method of lines"
Hamdi, Samir, William Schiesser i Graham Griffiths. "Method of lines". Scholarpedia 2, nr 7 (2007): 2859. http://dx.doi.org/10.4249/scholarpedia.2859.
Pełny tekst źródłaStankevich, Anatoliy. "MODIFIED METHOD OF LINES". Vestnik MGSU, nr 8 (sierpień 2016): 34–43. http://dx.doi.org/10.22227/1997-0935.2016.8.34-43.
Pełny tekst źródłaMuñoz-Pérez, Juan J., Raúl Medina i Begoña Tejedor. "Evolution of longshore beach contour lines determined by E.O.F. method". Scientia Marina 65, nr 4 (30.12.2001): 393–402. http://dx.doi.org/10.3989/scimar.2001.65n4393.
Pełny tekst źródłaAodsup, Kokiat, i Thanatchai Kulworawanichpong. "FDTD Method for Lightning Surge Propagation of Power Transmission Lines". SIJ Transactions on Computer Networks & Communication Engineering 02, nr 04 (7.08.2014): 07–11. http://dx.doi.org/10.9756/sijcnce/v2i4/0203080401.
Pełny tekst źródłaMurzaikin, I. Ya, i A. I. Murzaykin. "The method of parallel lines". Geodesy and Cartography 920, nr 2 (20.03.2017): 10–12. http://dx.doi.org/10.22389/0016-7126-2017-920-2-10-12.
Pełny tekst źródłaNam, S., S. El-Ghazaly, H. Ling i T. Itoh. "Time-domain method of lines". Electronics Letters 24, nr 2 (1988): 128. http://dx.doi.org/10.1049/el:19880085.
Pełny tekst źródłaHindley, D. T., M. A. Lewis i M. J. Robinson. "Method for securing umbilical lines." Archives of Disease in Childhood - Fetal and Neonatal Edition 70, nr 1 (1.01.1994): F79—F80. http://dx.doi.org/10.1136/fn.70.1.f79-a.
Pełny tekst źródłaShujun Xiao, R. Vahldieck i J. Hesselbarth. "Analysis of cylindrical transmission lines with the method of lines". IEEE Transactions on Microwave Theory and Techniques 44, nr 7 (lipiec 1996): 993–99. http://dx.doi.org/10.1109/22.508630.
Pełny tekst źródłaMykytyuk, Myroslav, i Volodymyr Khoma. "Pulse method of watchdog device building for subscriber telephone lines control". Odes’kyi Politechnichnyi Universytet. Pratsi, nr 3 (23.12.2015): 51–55. http://dx.doi.org/10.15276/opu.3.47.2015.13.
Pełny tekst źródłaJaruszewska-Walczak, Danuta, i Krzysztof A. Topolski. "Method of lines for pseudoparabolic equations". Annales Polonici Mathematici 120, nr 1 (2017): 41–61. http://dx.doi.org/10.4064/ap4097-9-2017.
Pełny tekst źródłaRozprawy doktorskie na temat "Method of lines"
Cayan, Fatma Nihan. "The Method Of Lines Solution Of Discrete Ordinates Method For Nongray Media". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/3/12607401/index.pdf.
Pełny tekst źródłaSuwan, Kumpanat. "The 'method of lines' applied to waterhammer computation". Thesis, University of Newcastle Upon Tyne, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.316718.
Pełny tekst źródłaGhimire, Sushma. "Analysis of Fault location methods on transmission lines". ScholarWorks@UNO, 2014. http://scholarworks.uno.edu/td/1800.
Pełny tekst źródłaKeen, Alan G. "Planar transmission line analyses using the Method of Lines". Thesis, University of Kent, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293993.
Pełny tekst źródłaLUSTOSA, EDUARDO MAGALHAES. "DYNAMICS OF SHIPPING LINES USING THE FINITE ELEMENT METHOD". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2000. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=26484@1.
Pełny tekst źródłaEste trabalho apresenta uma abordagem pelo método dos elementos finitos para o cálculo da resposta tridimensional, estática e dinâmica, de estruturas unidimensionais total ou parcialmente imersas em um fluido em movimento. A técnica utilizada baseia-se na separação do movimento de corpo rígido dos deslocamentos totais do elemento resultando naqueles que efetivamente causam deformações, consideradas infinitesimais, sob condições de rotações finitas. A posição da estrutura é definida por um conjunto de eixos co-rotacionados e a avaliação das rotações deste sistema é detalhada. O estudo apresentado considera as não-linearidades decorrentes da mudança de geometria, do acoplamento entre os mecanismos de rigidez axial e transversal e do carregamento hidrodinâmico, considerado proporcional ao quadrado da velocidade relativa entre fluido e estrutura. Na discretização espacial das equações de equilíbrio, a hipótese de pequenas deformações é empregada. Desta forma, a utilização do sistema de coordenada co-rotacionado permite considerar-se um elemento de dois nós baseado no modelo de viga de Euler-Bernoulli com funções de interpolação dos deslocamentos nodais utilizando os polinômios cúbicos de Hermite e referidos ao sistema convectivo de cada elemento. Na integração temporal das equações de equilíbrio, utiliza-se o procedimento passo-a-passo de Newmark juntamente com a técnica iterativa de Newton-Raphson, obtendo-se, a cada instante de tempo, a configuração correspondente ao equilíbrio dinâmico da estrutura discretizada. O procedimento apresentado foi implementado em um programa de computador tendo-se verificado, para diversos exemplos, uma convergência satisfatória entre os resultados do modelo implementado e aqueles obtidos de outros com origem independente.
This work presents a finite element approach to the three-dimensional static and dynamic response calculations of slender structures totally or partially immersed in a moving fluid. The technique is based on the separation of rigid body motions from the element total displacements resulting in those that effectively cause strain, and which are assumed infinitesimal, under conditions of finite rotations. The position of the structure is defined by a set of co-rotational axes and the evaluation of the finite rotations of this system is detailed. The study considers the non-linearities due to change in geometry, coupling between the axial and bending stiffness mechanisms and the velocity-squared drag loading. For the spatial discretization of the equilibrium equations, the small strain hypothesis is employed. The use of the co-rotational coordinate system makes possible to consider a two node element based on the Euler-Bernoulli beam kinematic model, with cubic Hermitian interpolation functions for the nodal displacements obtained at the convective coordinate system of each element. The Newmark step-by-step scheme is applied to directly integrate, in the time domain, the equilibrium equations and the Newton-Raphson iterative algorithm employed t solve the resultinh incremental non-linear set of equations, at each time step. The presented procedure was implemented in a computer program and various example results were satisfactorily tested against the ones obtained from independent programs.
Kim, Sangwoo. "Multiconductor transmission line analysis using surface ribbon method /". Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Pełny tekst źródłaVALE, Tassio Ferreira. "Using a Multi-Method Approach for Evaluating Service Identification Methods in Service-Oriented Product Lines". reponame:Repositório Institucional da UFPE, 2012. https://repositorio.ufpe.br/handle/123456789/11360.
Pełny tekst źródłaMade available in DSpace on 2015-03-09T12:32:57Z (GMT). No. of bitstreams: 2 MSc Dissertation -Tassio Ferreira Vale.pdf: 3047313 bytes, checksum: 266f36d93884380708ea06bafe535341 (MD5) license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Previous issue date: 2012-03
A combinação de Linhas de Produto de Software (LPS) e Computação Orientada a Serviços (COS) tem recebido atenção de pesquisadores e praticantes, já que uma área é capaz de solucionar determinados problemas da outra. A junção dessas duas áreas é chamada de Linha de Produto Orientada a Serviços (LPOS), e tem se mostrado uma área de pesquisa emergente nos últimos anos. No contexto da Computação Orientada a Serviços, identificação de serviços é uma das primeiras atividades para modelagem de uma solução COS, e consiste na determinação de serviços candidatos. Essa não é uma tarefa trivial, e os erros adquiridos durante a identificação de um serviço pode propagar-se para as atividades subsequentes do processo de desenvolvimento orientado a serviços. Existem diversas propostas para identificação de serviços. Apesar da diversidade, não existe um método de identificação de serviços capaz de adequar-se a diversos contextos e necessidades. Considerando a heterogeneidade desses métodos, esta dissertação tem o objetivo de verificar quais métodos podem ser aplicados em linhas de produto de software, bem como as vantagens, desvantages e desafios existentes neste campo. Esta pesquisa utilizou uma abordagem multi-métodos, que combina estudos primários e secundários a fim de incrementar o corpo de conhecimento em determinada área baseada nos achados de tal investigação. Desta forma, este trabalho utilizou um método secundário (revisão sistemática) e dois métodos primários com o intuito de aumentar a confiabilidade dessa pesquisa. Além disso, foi realizada uma revisão da literatura a fim de coletar as abordagens de identificação de serviços existentes, visando propor uma recomendação dos métodos mais adequados considerando três cenários de LPS: top-down, bottom-up e hybrid. Esta recomendação foi avaliada através de um estudo de caso com uma linha de produto de sistemas médicos, usando dois metodos classificados no cenário o qual os sistemas médicos encontram-se, top-down. A principal contribuição dessa pesquisa é prover um instrumento que auxilie os interessados em identificar serviços a escolher um método apropriado, levando em consideração o cenário SPL a ser aplicado. Os resultados do estudo de caso mostram que as abordagens de identificação de serviços podem ser aplicadas num contexto de LPS. Além disso, este métodos facilitam a realização da atividade de identificação.
The combination of Software Product Line (SPL) and Service-Oriented Computing (SOC) have started to receive attention by researchers and practitioners, since they can address issues of each other. Putting these two areas together is called Service-Oriented Product Lines Enginering (SOPLE), presenting itself as an emerging area in the last years. In the Service-Oriented Computing, service identification is one of the first activities in the modeling of a SOC solution, that consists of determining candidate services. This is not a trivial task, and the errors made during the identification can propagate mistakes to the next activities of the service-oriented development process. There are several proposals addressing service identification for several contexts. However, an unified method for identifying services has not yet been reached. Regarding the heterogeneity of these methods, this dissertation aims to verify which methods can be applied in the SPL context, the advantages, disadvantages and the existing challenges of this field. This research used a multi-method approach that combines primary and secondary studies in order to increase the availability of empirical knowledge based on the findings of the investigation. Thus, this work used one secondary method (systematic review) and two primary methods (survey and case study) to address it. Furthermore, it was performed a literature review in order to collect all existing approaches of service identification, aiming to propose a set of decision models that recommend the most suitable methods according to three SPL scenarios: bottom-up, topdown and hybrid, onde decision model for each scenario. One of the decision models was evaluated through a case study in a medical applications domain, using two approaches classified in the decision model of the top-down scenario. The main contribution of this research is to provide an instrument that can help the service identification stakeholders to choose a suitable method, taking consideration of their SPL scenarios. In addition, these systematic methods facilitate the application of the identification activity. The case study results evaluated some service identification approaches and presented evidence that the methods can be applied in SPL.
Ren, Xiaoan. "The method of arbitrary lines in non-linear visco-elasticity". Thesis, University of Westminster, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240413.
Pełny tekst źródłaAras, Ebru. "Characterization Of Skeletal Muscle Lipids In Obese Mice Lines". Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614568/index.pdf.
Pełny tekst źródłaLeonard, Ronald William. "Application of the Monte Carlo method to the estimation of the risk of failure of transmission line insulation". Thesis, University of British Columbia, 1988. http://hdl.handle.net/2429/28496.
Pełny tekst źródłaApplied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate
Książki na temat "Method of lines"
Vande, Wouwer A., Saucez Ph i Schiesser W. E, red. Adaptive method of lines. Boca Raton: Chapman & Hall/CRC Press, 2001.
Znajdź pełny tekst źródłaThe transmission-line modeling method: TLM. New York: Institute of Electrical and Electronics Engineers, 1995.
Znajdź pełny tekst źródłaPregla, Reinhold. Analysis of electromagnetic fields: The method of lines. Hoboken, NJ: J. Wiley & Sons, 2008.
Znajdź pełny tekst źródła1946-, Newman Edward H., i Langley Research Center, red. Moment method analysis of microstrip antennas over a wide frequency range. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1986.
Znajdź pełny tekst źródłaUnited States. National Aeronautics and Space Administration., red. The method of lines in analyzing solids containing cracks. [Washington, DC]: National Aeronautics and Space Administration, 1991.
Znajdź pełny tekst źródłaThe numerical method of lines: Integration of partial differential equations. San Diego: Academic Press, 1991.
Znajdź pełny tekst źródłaSchiesser, William E. Method of Lines PDE Analysis in Biomedical Science and Engineering. Hoboken, NJ, USA: John Wiley & Sons, Inc, 2016. http://dx.doi.org/10.1002/9781119130499.
Pełny tekst źródłaLederer, P. G. A transmission line method for the measurement of microwave permittivity and permeability. [London: HMSO, 1991.
Znajdź pełny tekst źródłaJames, William L. A microwave method for measuring moisture content, density, and grain angle of wood. [Madison, WI]: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985.
Znajdź pełny tekst źródłaA, Kishk Ahmed, red. Analysis and design of substrate integrated waveguide using efficient 2D hybrid method. San Rafael, Calif. (1537 Fourth Street, San Rafael, CA 94901 USA): Morgan & Claypool, 2010.
Znajdź pełny tekst źródłaCzęści książek na temat "Method of lines"
Karnovsky, Igor A., i Olga Lebed. "Influence Lines Method". W Advanced Methods of Structural Analysis, 323–68. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-1047-9_10.
Pełny tekst źródłaKarnovsky, Igor A., i Olga Lebed. "Influence Lines Method". W Advanced Methods of Structural Analysis, 413–50. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-44394-8_12.
Pełny tekst źródłaCoriat, Michel, Jean Jourdan i Fabien Boisbourdin. "The SPLIT Method". W Software Product Lines, 147–66. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-4339-8_8.
Pełny tekst źródłaKamont, Zdzislaw. "Numerical Method of Lines". W Hyperbolic Functional Differential Inequalities and Applications, 181–204. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4635-7_6.
Pełny tekst źródłaReuys, Andreas, Sacha Reis, Erik Kamsties i Klaus Pohl. "The ScenTED Method for Testing Software Product Lines". W Software Product Lines, 479–520. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-33253-4_13.
Pełny tekst źródłaBrowning, Tim. "Lines on Cubic Hypersurfaces". W Cubic Forms and the Circle Method, 141–57. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-86872-7_6.
Pełny tekst źródłaRommes, Eelco, i Pierre America. "A Scenario-Based Method for Software Product Line Architecting". W Software Product Lines, 3–52. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-33253-4_1.
Pełny tekst źródłaJaremkiewicz, Magdalena. "Method of Lines in Heat Conduction". W Encyclopedia of Thermal Stresses, 2990–97. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_395.
Pełny tekst źródłaImmonen, Anne. "A Method for Predicting Reliability and Availability at the Architecture Level". W Software Product Lines, 373–422. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-33253-4_10.
Pełny tekst źródłaAmerica, Pierre, Henk Obbink, Rob Ommering i Frank Linden. "CoPAM: A Component-Oriented Platform Architecting Method Family for Product Family Engineering". W Software Product Lines, 167–80. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-4339-8_9.
Pełny tekst źródłaStreszczenia konferencji na temat "Method of lines"
Zhang, Yiqi, i Yuan Liao. "Optimal Line Parameter Estimation Method For Mid-Compensated Transmission Lines". W 2019 North American Power Symposium (NAPS). IEEE, 2019. http://dx.doi.org/10.1109/naps46351.2019.9000274.
Pełny tekst źródłaBiryulin, V. I., A. N. Gorlov i D. V. Kudelina. "Method for Cable Lines Insulation Monitoring". W 2018 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). IEEE, 2018. http://dx.doi.org/10.1109/icieam.2018.8728700.
Pełny tekst źródłaYang, Lei, Nanning Zheng, Yonghong Song i Yuanlin Zhang. "A Regeneration Based Lines Restoration Method". W 2006 6th International Conference on Intelligent Systems Design and Applications. IEEE, 2006. http://dx.doi.org/10.1109/isda.2006.253709.
Pełny tekst źródłaMammi, Elena, i Anna Del Grosso. "A method for copper lines classification". W 2011 50th FITCE Congress - "ICT: Bridging an Ever Shifting Digital Divide" (FITCE). IEEE, 2011. http://dx.doi.org/10.1109/fitce.2011.6133444.
Pełny tekst źródłaLangerak, Thomas R., Joris S. M. Vergeest i Yu Song. "Parameterising Styling Lines for Reverse Design Using Free Form Shape Analysis". W ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84391.
Pełny tekst źródłaKil, Taeho, Wonkyo Seo, Hyung Il Koo i Nam Ik Cho. "Robust Document Image Dewarping Method Using Text-Lines and Line Segments". W 2017 14th IAPR International Conference on Document Analysis and Recognition (ICDAR). IEEE, 2017. http://dx.doi.org/10.1109/icdar.2017.146.
Pełny tekst źródłaGerdes, Johannes, i Reinhold Pregla. "Bidirectional beam-propagation method based on the Method of Lines". W Integrated Photonics Research. Washington, D.C.: OSA, 1993. http://dx.doi.org/10.1364/ipr.1993.itui8.
Pełny tekst źródłaYan, Sun, Wang Cheng i Xie Fei. "Method for Joining Intersected Contour Lines Intelligently". W 2009 International Forum on Information Technology and Applications (IFITA). IEEE, 2009. http://dx.doi.org/10.1109/ifita.2009.349.
Pełny tekst źródłaDmitriev, Nikita. "Complex method of reconstruction of contour lines". W PROCEEDINGS OF THE 45TH INTERNATIONAL CONFERENCE ON APPLICATION OF MATHEMATICS IN ENGINEERING AND ECONOMICS (AMEE’19). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5133563.
Pełny tekst źródłaCherek, B., i T. J. Brazil. "A Measurement Method for Symmetrical Coupled Lines". W 18th European Microwave Conference, 1988. IEEE, 1988. http://dx.doi.org/10.1109/euma.1988.333839.
Pełny tekst źródłaRaporty organizacyjne na temat "Method of lines"
Schiesser, W. E. Method of lines solution of the Korteweg-de Vries equation. Office of Scientific and Technical Information (OSTI), czerwiec 1993. http://dx.doi.org/10.2172/64337.
Pełny tekst źródłaMahrt, Kristi, Anna W. Herforth, Sherman Robinson, Channing Arndt i Derek D. Headey. Nutrition as a basic need: A new method for utility-consistent and nutritionally adequate food poverty lines. Washington, DC: International Food Policy Research Institute, 2022. http://dx.doi.org/10.2499/p15738coll2.135901.
Pełny tekst źródłaDemko, J. A., W. E. Schiesser, R. Carcagno i M. McAshan. A method of lines solution of the transient behavior of the helium cooled power leads for the SSC. Office of Scientific and Technical Information (OSTI), maj 1995. http://dx.doi.org/10.2172/80734.
Pełny tekst źródłaSheptunov, M. V. Innovation interdisciplinary: a Method of optimizing the performance of production lines for the digitization of Museum objects and archival library materials and collections. Science and Innovation Center Publishing House, 2017. http://dx.doi.org/10.12731/ofernio.2017.23132.
Pełny tekst źródłaAbou-El-Seoud, Dena, Johnna Potthoff, John Cheek, Jeffrey Stamper, Steven Yates, David Druzbicki, Courtney Chambers i in. Invasive species costs to the USACE Navigation Business Line : a demonstration analysis in the Chicago District. Engineer Research and Development Center (U.S.), grudzień 2022. http://dx.doi.org/10.21079/11681/46223.
Pełny tekst źródłaTanksley, Steven D., i Dani Zamir. Development and Testing of a Method for the Systematic Discovery and Utilization of Novel QTLs in the Production of Improved Crop Varieties: Tomato as a Model System. United States Department of Agriculture, czerwiec 1995. http://dx.doi.org/10.32747/1995.7570570.bard.
Pełny tekst źródłaSoller, Moshe (Morris), Hans Cheng i Lyman Crittenden. Mapping the Chicken Genome, Including Loci Affecting Traits of Economic Importance. United States Department of Agriculture, wrzesień 1994. http://dx.doi.org/10.32747/1994.7568779.bard.
Pełny tekst źródłaGur, Amit, Edward Buckler, Joseph Burger, Yaakov Tadmor i Iftach Klapp. Characterization of genetic variation and yield heterosis in Cucumis melo. United States Department of Agriculture, styczeń 2016. http://dx.doi.org/10.32747/2016.7600047.bard.
Pełny tekst źródłaCorscadden, Louise, i Anjali Singh. Methods Of Cleaning And Sterilization. Maze Engineers, grudzień 2022. http://dx.doi.org/10.55157/cs20221207.
Pełny tekst źródłaDavid, Lior, Yaniv Palti, Moshe Kotler, Gideon Hulata i Eric M. Hallerman. Genetic Basis of Cyprinid Herpes Virus-3 Resistance in Common Carp. United States Department of Agriculture, styczeń 2011. http://dx.doi.org/10.32747/2011.7592645.bard.
Pełny tekst źródła