Gotowa bibliografia na temat „Metallic and polymeric nanowire arrays”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Metallic and polymeric nanowire arrays”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Metallic and polymeric nanowire arrays"
PUI YEE, LOH, LIU CHENMIN, PUA WEICHENG, KAM FONG YU i CHIN WEE SHONG. "FACILE FABRICATION OF ONE-DIMENSIONAL MULTI-COMPONENT NANOSTRUCTURES USING POROUS ANODIZED ALUMINA MEMBRANE". COSMOS 06, nr 02 (grudzień 2010): 221–34. http://dx.doi.org/10.1142/s0219607710000577.
Pełny tekst źródłaBroaddus, Eric, Ann Wedell i Scott A. Gold. "Formic Acid Electrooxidation by a Platinum Nanotubule Array Electrode". International Journal of Electrochemistry 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/424561.
Pełny tekst źródłaSearson, P. C., R. C. Cammarata i C. L. Chien. "Electrochemical processing of metallic nanowire arrays and nanocomposites". Journal of Electronic Materials 24, nr 8 (sierpień 1995): 955–60. http://dx.doi.org/10.1007/bf02652967.
Pełny tekst źródłaYin, A. J., J. Li, W. Jian, A. J. Bennett i J. M. Xu. "Fabrication of highly ordered metallic nanowire arrays by electrodeposition". Applied Physics Letters 79, nr 7 (13.08.2001): 1039–41. http://dx.doi.org/10.1063/1.1389765.
Pełny tekst źródłaFernandes, David E., i Mário G. Silveirinha. "Bright and dark spatial solitons in metallic nanowire arrays". Photonics and Nanostructures - Fundamentals and Applications 12, nr 4 (sierpień 2014): 340–49. http://dx.doi.org/10.1016/j.photonics.2014.04.003.
Pełny tekst źródłaUzun, Ceren, Chandrasekhar Meduri, Niloofar Kahler, Luis Grave de Peralta, Jena M. McCollum, Michelle Pantoya, Golden Kumar i Ayrton A. Bernussi. "Photoinduced heat conversion enhancement of metallic glass nanowire arrays". Journal of Applied Physics 125, nr 1 (7.01.2019): 015102. http://dx.doi.org/10.1063/1.5059423.
Pełny tekst źródłaQiaoqiang Gan, Haifeng Hu, Huina Xu, Ke Liu, Suhua Jiang i A. N. Cartwright. "Wavelength-Independent Optical Polarizer Based on Metallic Nanowire Arrays". IEEE Photonics Journal 3, nr 6 (grudzień 2011): 1083–92. http://dx.doi.org/10.1109/jphot.2011.2173478.
Pełny tekst źródłaZhang, X. Y., L. D. Zhang, W. Chen, G. W. Meng, M. J. Zheng, L. X. Zhao i F. Phillipp. "Electrochemical Fabrication of Highly Ordered Semiconductor and Metallic Nanowire Arrays". Chemistry of Materials 13, nr 8 (sierpień 2001): 2511–15. http://dx.doi.org/10.1021/cm0007297.
Pełny tekst źródłaZhang, Bo, Yu-Yan Weng, Xiao-Ping Huang, Mu Wang, Ru-Wen Peng, Nai-Ben Ming, Bingjie Yang, Nan Lu i Lifeng Chi. "Creating In-Plane Metallic-Nanowire Arrays by Corner-Mediated Electrodeposition". Advanced Materials 21, nr 35 (18.09.2009): 3576–80. http://dx.doi.org/10.1002/adma.200900730.
Pełny tekst źródłaYee, Timothy D., Carla L. Watson, John D. Roehling, T. Yong-Jin Han i Anna M. Hiszpanski. "Fabrication and 3D tomographic characterization of nanowire arrays and meshes with tunable dimensions from shear-aligned block copolymers". Soft Matter 15, nr 24 (2019): 4898–904. http://dx.doi.org/10.1039/c9sm00303g.
Pełny tekst źródłaRozprawy doktorskie na temat "Metallic and polymeric nanowire arrays"
Sakhamuri, Siddhardha Mohan. "CORROSIVITY SENSOR BASED ON METALLIC NANOWIRE ARRAYS". University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1467894583.
Pełny tekst źródłaYe, Bo. "Fabrication and Magnetic Property Investigation of Metallic Nanowire Arrays". ScholarWorks@UNO, 2006. http://scholarworks.uno.edu/td/424.
Pełny tekst źródłaUllah, Wahid. "Synthèse électrochimique de nanoréseaux métalliques et polymériques au travers de films minces de silice mésoporeuse à canaux verticalement orientés". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0093.
Pełny tekst źródłaIn this project we exploited surface modification of electrodes with vertically oriented mesoporous silica thin films, generated by electrochemically assisted self-assembly method. The silica scaffold offers narrow pores diameter around 2-3 nm and 50-150 nm film thickness, a competitive hard template material for the preparation of low dimensional metallic and organic nanopatterns on conducting surfaces. We combined the wealth of mesoporous silica thin film with electrochemistry to obtain surface nanopatterning of the underlying support. Well-adhered and mechanically stable mesoporous silica film is formed on electrodes bearing hydroxyl moieties on their surface, for example indium tin oxide (ITO). However, the adhesion and mechanical stability of mesoporous silica thin film is poor on noble metals such as gold (Au). To ensure uniform surface coverage and good adhesion of the silica film to the Au surface, it was necessary to use a (3-mercaptopropyl) trimethoxysilane (MPTMS) reagent to act as a “molecular glue” thanks to its thiol functionality, which is able to bind to the gold substrate and to its alkoxysilane moieties enabling condensation with the silica material. The MPTMS layer had, however, a significant effect on film permeability to redox probes, depending on the MPTMS treatment time. MPTMS adsorption should be long enough to ensure proper adhesion of the film but not too long to avoid surface blocking or film defects. In addition, Cu underpotential deposition (UPD) experiments revealed that the silica membrane significantly affected the UPD process, suggesting some barrier effect of the porous membrane, but the interface Au/MPTMS/silica is not sharp and allowed metal UPD between the gold substrate and the silica thin film. In the second part of the thesis, mesoporous silica thin films, with two distinct pore diameters (2.0 and 2.9 nm), covered ITO electrodes were used as hard template for the control electrochemical growth of polyaniline (PANI) nanowire arrays. To ensure proper adhesion of PANI to the underlying ITO surface, aniline moieties are first covalently attached to the bottom of mesochannels via electrografting of aminophenyl diazonium cations, serving in a second step as precursors for PANI growth by electropolymerization of aniline through the silica mesochannels. PANI wires remain attached to ITO after removal of the silica membrane, confirming the importance of initial electrografting. Both PANI inside silica template and the free PANI nanowire arrays were electroactive. Spectroelectrochemical study revealed fast electrochromic behavior and cycling stability of PANI nanowire arrays. In last part of the project, some preliminary attempts were made for the electrochemical co-deposition of bimetallic Cobalt/Platinum (CoPt) nanowire arrays onto ITO electrode covered with mesoporous silica films. The presence of Co and Pt in the deposits was confirmed from surface analysis by spectroscopic methods and electrochemical characterization
Liakakos, Nikolaos. "Organometallic approach to the growth of metallic magnetic nanoparticles in solution and on substrates". Thesis, Toulouse, INSA, 2013. http://www.theses.fr/2013ISAT0026/document.
Pełny tekst źródłaThis thesis concerns a new wet chemical seeded growth method that can produce arrays of metal nanostructures epitaxially grown on crystalline macroscopic surfaces which act as seeds. This approach produces wafer-scale organized 2D hexagonal arrays of perpendicularly oriented, monodisperse and monocrystalline metallic Co nanowires with diameters below 10 nm which exhibit perpendicular magnetic anisotropy and are interesting for applications in ultra high density magnetic recording. Extension of this approach to iron gives rise to nanostructured iron films. The orientation of the nanostructures on the solid substrate depends on the substrate crystallographic orientation, whereas their morphology is dictated by the solution composition. This objective was attained through parallel studies on the growth mechanism of cobalt nano-crystals in solution which revealed an unexpected influence of the stock solution preparation procedure on the nanocrystal morphology. In addition, the use of nanoscopicseeds for the overgrowth of cobalt and iron gave rise to long Co nanowires and Co-Fe dumbbells and contributed to the definition and the improvement of the experimental conditions for the seeded growth of Co and Fe on the solid substrates
(6872132), Doosan Back. "APPLICATIONS OF MICROHEATER/RESISTANCE TEMPERATURE DETECTOR AND ELECTRICAL/OPTICAL CHARACTERIZATION OF METALLIC NANOWIRES WITH GRAPHENE HYBRID NETWORKS". Thesis, 2020.
Znajdź pełny tekst źródłaStreszczenia konferencji na temat "Metallic and polymeric nanowire arrays"
Sharma, Gaurav, Kripesh Vaidyanathan i John H. Lau. "Patterned Metallic Nanowire Arrays Based Flip Chip Interconnects". W 2008 10th Electronics Packaging Technology Conference (EPTC 2008). IEEE, 2008. http://dx.doi.org/10.1109/eptc.2008.4763541.
Pełny tekst źródłaGraf, Matthias, Alexander Eychmuller i Klaus-Jurgen Wolter. "High aspect ratio metallic nanowire arrays by pulsed electrodeposition". W 2011 IEEE 11th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2011. http://dx.doi.org/10.1109/nano.2011.6144342.
Pełny tekst źródłaIm, Seongmin, Gwiyeong Moon, Eunji Sim i Donghyun Kim. "Thermal extinction and image misregistration on metallic nanowire arrays". W Physics and Simulation of Optoelectronic Devices XXX, redaktorzy Marek Osiński, Yasuhiko Arakawa i Bernd Witzigmann. SPIE, 2022. http://dx.doi.org/10.1117/12.2610533.
Pełny tekst źródłaSCHOLZ, PATRICK, STEPHAN SCHWIEGER, PARINDA VASA i ERICH RUNGE. "CALCULATION AND INTERPRETATION OF SURFACE-PLASMON-POLARITON FEATURES IN THE REFLECTIVITY OF METALLIC NANOWIRE ARRAYS". W Proceedings of the 31st International Workshop. WORLD SCIENTIFIC, 2008. http://dx.doi.org/10.1142/9789812836625_0016.
Pełny tekst źródłaRoustaie, F., S. Quednau, F. Dassinger, H. F. Schlaak, M. Lotz i S. Wilfert. "In-place synthesis of metallic nanowire arrays for the use in an ionization vacuum gauge". W 2015 28th International Vacuum Nanoelectronics Conference (IVNC). IEEE, 2015. http://dx.doi.org/10.1109/ivnc.2015.7225571.
Pełny tekst źródłaStojanovic, Nenad, Jordan M. Berg, D. H. S. Maithripala i Mark Holtz. "Microelectrothermal Bridge Circuits for Thermal Conductivity Measurement of Metallic and Semiconducting Nanowires". W ASME 2010 Dynamic Systems and Control Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/dscc2010-4291.
Pełny tekst źródłaLin, Bang-Yan, Hung-chun Chang i Dmitry N. Chigrin. "Analysis of Dielectric-Coated Metallic Nanowire Arrays by the Multiple Scattering Method and a Pseudospectral Time-Domain Scheme". W THEORETICAL AND COMPUTATIONAL NANOPHOTONICS (TACONA-PHOTONICS 2009): Proceedings of the 2nd International Workshop. AIP, 2009. http://dx.doi.org/10.1063/1.3253882.
Pełny tekst źródłaLiang, Jianyu, i Zhenhai Xia. "Synthesis and Properties of Cobalt Nanowires". W 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. ASMEDC, 2007. http://dx.doi.org/10.1115/mnc2007-21298.
Pełny tekst źródła