Gotowe bibliografie tematyczne / Mechanical property

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Mechanical property”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 13 września 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Mechanical property”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Mechanical property"

Schelleng, Robert D. "Mechanical Property Control of Mechanically Alloyed Aluminum". JOM 41, nr 1 (styczeń 1989): 32–35. http://dx.doi.org/10.1007/bf03220800.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Nakazono, Kazuko, i Toshikazu Takata. "Mechanical Chirality of Rotaxanes: Synthesis and Function". Symmetry 12, nr 1 (10.01.2020): 144. http://dx.doi.org/10.3390/sym12010144.

Pełny tekst źródła

Streszczenie:

Mechanically chiral molecules have attracted considerable attention due to their property and function based on its unique interlocked structure. This review covers the recent advances in the synthesis and function of interlocked rotaxanes with mechanical chirality along with their dynamic and complex stereochemistry. The application of mechanically chiral rotaxanes to control the polymer helical structure is also introduced, where amplification of mechanical chirality appears to cause the macroscopic polymer property change, suggesting the potential applicability of mechanical chirality in polymer systems.

Style APA, Harvard, Vancouver, ISO itp.

Liu, Peng, Zhi Wu Yu, Ling Kun Chen i Zhu Ding. "Mechanical Property of Phosphoaluminate Cement". Advanced Materials Research 150-151 (październik 2010): 1754–57. http://dx.doi.org/10.4028/www.scientific.net/amr.150-151.1754.

Pełny tekst źródła

Streszczenie:

The influence of curing time on the mechanical property of the phosphoaluminate cement (PAC) was investigated, and the mechanism was discussed as well. The phase composition and morphology of hydration products, electrical properties, porosity and pore size distribution of PAC cured different age were analyzed with XRD, EIS and MIP. The results showed PAC has the property of early-high strength, and the compressive strength of PAC cured for 1 day was about 70% of 28 days’. The main hydration products of PAC are micro-crystal phase and gel of phosphate and phosphoaluminate which formed compacter microstructure. In addition, there are no calcium hydroxide (CH) and ettringite (AFt) produced during the process of hydration. The compressive strength of PAC increased with age, which was due to more products continuously produced. The ac resistance analysis manifested as the change of the nyquist pattern and resistance value.

Style APA, Harvard, Vancouver, ISO itp.

WAKI, Hiroyuki. "Testing Method for Mechanical Property :". Journal of The Surface Finishing Society of Japan 64, nr 5 (2013): 280–84. http://dx.doi.org/10.4139/sfj.64.280.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Steen, M., i C. Filiou. "Mechanical Property Scatter in CFCCs". Journal of Engineering for Gas Turbines and Power 122, nr 1 (20.10.1999): 69–72. http://dx.doi.org/10.1115/1.483177.

Pełny tekst źródła

Streszczenie:

The tensile response of continuous fibre reinforced ceramic matrix composites (CFCCs) is not expected to show the large variation in strength properties commonly observed for monolithic ceramics. Results of recent investigations on a number of two-dimensional reinforced CFCCs have nevertheless revealed a considerable scatter in the initial elastic modulus, in the first matrix cracking stress and in the failure stress. One school of thought considers that the observed variability is caused by experimental factors. Elaborate testing programmes have been set up to clarify the origins of this scatter by investigation of the effects of control mode, loading rate, specimen shape, etc. Another school explains the scatter by the presence of (axial) residual stresses in the fibres and in the matrix. Although plausible, this hypothesis is difficult to verify because experimental determination of the residual stress state in CFCCs is not straightforward. In addition, with the available methods it is impractical to determine the residual stresses in every test specimen. This approach is indeed required for establishing the relationship between the magnitude of the residual stresses and the experimentally observed scatter. At IAM a method has been developed and validated which allows to quantify the axial residual stress state in individual CFCC specimens by subjecting them to intermittent unloading-reloading cycles. The method as well as the derived relationship between residual stress state and scatter in mechanical response will be presented. [S0742-4795(00)01101-7]

Style APA, Harvard, Vancouver, ISO itp.

Yang, Wei, Liang Lifu i Liang Zhongwei. "On mechanical property of constraint". Applied Mathematics and Mechanics 16, nr 11 (listopad 1995): 1095–103. http://dx.doi.org/10.1007/bf02484376.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tao, Jun Lin, Wei Fang Xu, Gang Cheng, Xi Cheng Huang, Fang Ju Zhang i Xiao Xia Pan. "Dynamic Mechanical Property of a Steel". Advanced Materials Research 197-198 (luty 2011): 1681–85. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.1681.

Pełny tekst źródła

Streszczenie:

In order to realize the dynamic mechanical property of a steel, the quasic-static and dynamic compressive and tensile mechanical tests of a steel are carried out. Based on the stress-strain curves of the steel, the constitutive relation is presented and it can be used to describe compressive and tensile mechanical property correspondently. The stress-strain curves at different strain rate and the obtained dynamic constitutive relationship show that the flow stress of the steel is increased with strain rate increased. The dynamic tension experimental results show that failure strain and stress of the steel are increased small with strain rate increased, and the fracture of tension sample is ductile fracture.

Style APA, Harvard, Vancouver, ISO itp.

ONITA, Takafumi, Tsuyoshi NISHIWAKI, Zen-ichiro MAEKAWA i Hiroyuki HAMADA. "Mechanical Property of Matrix Hybrid Laminates." Journal of the Society of Materials Science, Japan 50, nr 10 (2001): 1146–51. http://dx.doi.org/10.2472/jsms.50.1146.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Nakagawa, Yuji. "MECHANICAL PROPERTY OF THE HUMAN URETER". Japanese Journal of Urology 80, nr 10 (1989): 1481–88. http://dx.doi.org/10.5980/jpnjurol1989.80.1481.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

NAGASHIMA, Nobuo. "Multi-scale Mechanical Property Strength Analysis". Transactions of Japan Society of Spring Engineers 2021, nr 66 (31.03.2021): 13–21. http://dx.doi.org/10.5346/trbane.2021.13.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Mechanical property"

Janakiraman, Balasubramanian. "Mechanical property measurement by indentation techniques". Texas A&M University, 2004. http://hdl.handle.net/1969.1/3111.

Pełny tekst źródła

Streszczenie:

The mechanical properties of materials are usually evaluated by performing a tensile or hardness test on the sample. Tensile tests are often time consuming, destructive and need specially prepared specimens. On the other hand, there is no direct theoretical correlation between the hardness number and the mechanical properties of a material although phenomenological relationships do exist. The advantages of indentation techniques are that they are non-destructive, quick, and can be applied to small material samples and localized in fashion. Mechanical properties are typically determined from spherical indentation load-depth curves. This process is again a time consuming one and not suitable for situations where a quick assessment is required such as in the sheet metal rolling industry. In the present study, a novel method of measuring mechanical properties of the material by multiple spherical indentations is developed. A series of indentations are made on the substrate with a spherical indenter with different loads. The diameter of the indentation is related to the load applied to determine the mechanical properties of the material, namely the yield strength and the work hardening parameters. To determine the diameter of the indentation quickly, a fiber optic sensing technique is developed. An incident light beam from a semiconductor laser is coupled back into an optical fiber upon reflection from the metal surface. By measuring the diffused light power reflected from the metal surface, the diameter of the indentation is measured. The spherical indentation technique is difficult for real time mechanical property measurement of sheet metal in a processing line. Problems arise as the strip is traveling at 2,000 to 4,000 ft/min (10,000 to 20,000 mm/sec) in the processing line. As a first step in developing a process that could be implemented in a real time processing line, a preliminary study has been conducted for the prediction of yield strength by laser shock processing.

Style APA, Harvard, Vancouver, ISO itp.

Bargo, Johnny E. "Mechanical property characterization of recycled thermoplastics". Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1473.

Pełny tekst źródła

Streszczenie:

Thesis (M.S.)--West Virginia University, 2000.
Title from document title page. Document formatted into pages; contains xvii, 143 p. : ill. (some col.) Includes abstract. Includes bibliographical references (p. 104-105).

Style APA, Harvard, Vancouver, ISO itp.

Hill, Jeremy Lee. "Mechanical property determination for flexible material systems". Diss., Georgia Institute of Technology, 2016. http://hdl.handle.net/1853/54993.

Pełny tekst źródła

Streszczenie:

Inflatable Aerodynamic Decelerators (IADs) are a candidate technology NASA began investigating in the late 1960’s. Compared to supersonic parachutes, IADs represent a decelerator option capable of operating at higher Mach numbers and dynamic pressures. IADs have seen a resurgence in interest from the Entry, Descent, and Landing (EDL) community in recent years. The NASA Space Technology Roadmap (STR) highlights EDL systems, as well as, Materials, Structures, Mechanical Systems, and Manufacturing (MSMM) as key Technology Areas for development in the future; recognizing deployable decelerators, flexible material systems, and computational design of materials as essential disciplines for development. This investigation develops a multi-scale flexible material modeling approach that enables efficient high-fidelity IAD design and a critical understanding of the new materials required for robust and cost effective qualification methods. The approach combines understanding of the fabric architecture, analytical modeling, numerical simulations, and experimental data. This work identifies an efficient method that is as simple and as fast as possible for determining IAD material characteristics while not utilizing complicated or expensive research equipment. This investigation also recontextualizes an existing mesomechanical model through validation for structures pertaining to the analysis of IADs. In addition, corroboration and elaboration of this model is carried out by evaluating the effects of varying input parameters. Finally, the present investigation presents a novel method for numerically determining mechanical properties. A sub-scale section that captures the periodic pattern in the material (unit cell) is built. With the unit cell, various numerical tests are performed. The effective nonlinear mechanical stiffness matrix is obtained as a function of elemental strains through correlating the unit cell force-displacement results with a four node membrane element of the same size. Numerically determined properties are validated for relevant structures. Optical microscopy is used to capture the undeformed geometry of the individual yarns.

Style APA, Harvard, Vancouver, ISO itp.

Wright, Andrew M. (Andrew Milton) 1976. "Real-time mass property estimation". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/88852.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Alifierakis, Michail. "Mechanical Property Modeling of Graphene Filled Elastomeric Composites". Thesis, Princeton University, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10823814.

Pełny tekst źródła

Streszczenie:

Accessing improved elastomeric composites filled with functionalized graphene sheets (FGSs) requires an understanding of how the FGSs aggregate and how the position of FGSs affects the mechanical properties of the final composite material. In this thesis, I study both effects by devising models for 2-D particles in the 10s of microns scale and comparing my results with experiments. These models enable an understanding of the effect of the particles in a level that is hard to be studied experimentally or by molecular models. In the first part, I present a model for aggregation of 2-D particles and apply it to study the aggregation of FGS in water with varying concentrations of sodium dodecyl sulfate (SDS). The model produces clusters of similar sizes and structures as a function of SDS concentration in agreement with experiments and predicts the existence of a critical surfactant concentration beyond which thermodynamically stable FGS suspensions form. Around the critical surfactant concentration, particles form dense clusters and rapidly sediment. At surfactant concentrations lower than the critical concentration, a contiguous ramified network of FGS gel forms which also densifies, but at a lower rate, and sediments with time. This densification leads to graphite-like structures. In the second part, I present a model for the prediction of the mechanical properties of elastomers filled with 2-D particles. I apply this model to the Poly-dimethylsiloxane (PDMS)-FGS system. For a perfect polymer matrix and when inter-particle forces are ignored the strength of the composite can be increased with the addition of particles but elongation at failure decreases relative to neat PDMS. Maximum load transfer to the particles is achieved when particles are covalently linked to span the whole polymer matrix. Minimum drop in elongation at failure can be achieved by maximizing the distance between the covalently linked particles. When the assumption of a perfect polymer matrix is relaxed, it can be shown that there is a certain particle concentration range for which elongation at failure can be increased as the particles can protect the polymer by redistributing high stresses created by inherent polymer defects that would lead to early failure.

Style APA, Harvard, Vancouver, ISO itp.

Carrasquel, Isha. "STRUCTURE-PROPERTY QUANTIFICATION RELATED TO CRASHWORTHINESS". MSSTATE, 2008. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07102008-140429/.

Pełny tekst źródła

Streszczenie:

The objective of this study is to characterize critical component structure-properties on a Dodge Neon for material response refinement in crashworthiness simulations. Crashworthiness simulations using full-scale finite element (FE) vehicle models are an important part of vehicle design. According to the National Highway Traffic Safety Administration (NHTSA), there were over six million vehicle crashes in the United States during 2004, claming lives of more than 40,000 people. Crashworthiness simulations on a detailed FE model of a 1996 Plymouth/Dodge Neon were conducted on the NHTSA for different impact crash scenarios. The top-ten energy-absorbing components of the vehicle were determined. Material was extracted from the as-built vehicle and microstructural analyses were conducted. Tension tests at different temperatures and strain rates were performed as well as microhardness tests. Different microstructural spatial clustering and mechanical properties were found for diverse vehicle components. A plasticity model based on microstructure was used to predict the material response of the front bumper.

Style APA, Harvard, Vancouver, ISO itp.

Kim, Joon-Seop. "Structure-morphology-mechanical property relationships in various random ionomers". Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28475.

Pełny tekst źródła

Streszczenie:

The aim of this study was to explore the effects of a range of variables on the properties of ionomers, and also to investigate the structure-morphology-property relationships in these materials in order to advance our understanding in the light of the EHM model. In the first part of the work, the influence of variables such as sample preparation conditions, molecular weight and degree of neutralization on the dynamic mechanical properties of ionomers were studied.
In the second part, the effects of surfactant addition and chemical structure of ionomers were investigated. Sodium sulfonated polystyrene ionomers were mixed with the surfactant sodium p-dodecylbenzene sulfonate. This surfactant molecule has a head group identical to the ionic group of the polymer chain. Therefore, the head group resides in the multiplets, and tail group in the restricted mobility region surrounding the multiples. This results in a dramatic decrease in the cluster $T sb{ rm g}$ as a function of the amount of added surfactant. In the next project, the contact surface area of the chain and its effect on multiplet size was studied. An inverse relationship between contact surface area and size of multiplet was found; if the size of multiplet is decreased, the cluster $T sb{ rm g}$ increases and the ionic plateau is also higher and longer. Furthermore, when the pendant group of the polymer is replaced by a bulkier group, the chain becomes stiffer. As a result, the two $T sb{ rm g}$s shift to higher temperatures. In still another part of the study, the dynamic mechanical properties of poly(styrene-co-sodium methacrylate) ionomers were re-investigated in detail. Discontinuities in the plots of various parameters obtained from the tan $ delta$ vs temperature and modulus vs temperature curves as a function of the ion contents were found. These discontinuities suggest that there are two morphological changes in the system as a function of the ion contents, one at ca. 4-6 and the other at ca. 12-14 mol % of ions. In addition, the data were interpreted using filler and percolation concepts. The Guth equation for modulus vs filler content is applicable up to 30 volume % of the clusters. The Halpin-Tsai equation for the regular system is also applicable at low ion contents. For the percolation approach, the percolation threshold was found at 5.4 mol % of ions. The critical exponent and critical volume fraction of clusters were found to be 1.31 and 0.64, respe

Style APA, Harvard, Vancouver, ISO itp.

Benjamin, Alex(Alex Robert). "3D organ property mapping using freehand ultrasound scans". Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/128989.

Pełny tekst źródła

Streszczenie:

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2020
Cataloged from student-submitted PDF of thesis.
Includes bibliographical references (pages 141-151).
3D organ property mapping has gained a considerable amount of interest in the recent years because of its diagnostic and clinical significance. Existing methods for 3D property mapping include computed tomography (CT), magnetic resonance imaging (MRI), and 3D ultrasound (3DUS). These methods, while capable of producing 3D maps, suffer from one or more of the following drawbacks: high cost, long scan times, computational complexity, use of ionizing radiation, lack of portability, and the need for bulky equipment. We propose the development of a framework that allows for the creation of 3D property maps at point of care (specifically structure and speed of sound). A fusion of multiple low-cost sensors in a Bayesian framework localizes a conventional 1D-ultrasound probe with respect to the room or the patient's body; localizing the probe relative to the body is achieved by using the patient's superficial vasculature as a natural encoding system. Segmented 2D ultrasound images and quantitative 2D speed of sound maps obtained using numeric inversion are stitched together to create 3D property maps. A further advantage of this framework is that it provides clinicians with dynamic feedback during freehand scans; specifically, it dynamically updates the underlying structural or property map to reflect high and low uncertainty regions. This allows clinicians to repopulate regions within additional scans. Lastly, the method also allows for the registration and comparison of longitudinally acquired 3D property/structural maps.
by Alex Benjamin.
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Mechanical Engineering

Style APA, Harvard, Vancouver, ISO itp.

Hollinshead, Phillip Anthony. "Texture and mechanical property developments in aluminium alloy hot rolling". Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/38036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kibble, Kevin Alexander. "Surface finish-mechanical property relation in reaction-bonded silicon carbide". Thesis, University of Wolverhampton, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240364.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Mechanical property"

Chatterjee, S. Mechanical property studies on irradiated garter springs. Mumbai, India: Bhabha Atomic Research Centre, 1999.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Geimer, Robert L. Mechanical property ratios: A measure of flake alignment. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

United States. National Aeronautics and Space Administration., red. Structure-property relationships of bismaleimides: A dissertation ... [Washington, DC: National Aeronautics and Space Administration, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yi-Wen, Cheng, McCowan Chris N i National Institute of Standards and Technology (U.S.), red. Structure-property relationships in steel produced in hot-strip mills. Boulder, Colo: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1999.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yi-Wen, Cheng, McCowan C. N i National Institute of Standards and Technology (U.S.), red. Structure-property relationships in steel produced in hot-strip mills. Boulder, Colo: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1999.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Farley, Gary L. Relationship between mechanical-property and energy-absorption trends for composite tubes. Hampton, Va: Langley Research Center, 1992.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Center, Langley Research, i United States. Army Aviation Systems Command., red. Mechanical property characterization and impact resistance of selected graphite/PEEK composite materials. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hales, Stephen J. Structure-property correlations in Al-Li alloy integrally stiffened extrusions. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

A, Hafley Robert, i Langley Research Center, red. Structure-property correlations in Al-Li alloy integrally stiffened extrusions. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Mechanical property"

Gooch, Jan W. "Mechanical Property". W Encyclopedic Dictionary of Polymers, 449. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7255.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jacquemin, F., i S. Fréour. "Water–Mechanical Property Coupling". W Solid Mechanics and Its Applications, 115–28. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-7417-9_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kennedy, Peter, i Rong Zheng. "Improved Mechanical Property Modeling". W Flow Analysis of Injection Molds, 123–30. München: Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.3139/9781569905227.008.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kennedy, Peter, i Rong Zheng. "Improved Mechanical Property Modeling". W Flow Analysis of Injection Molds, 123–30. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Luo, Yunhua. "Bone Density and Mechanical Property". W Image-Based Multilevel Biomechanical Modeling for Fall-Induced Hip Fracture, 31–44. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51671-4_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Nakai, Masaaki, i Mitsuo Niinomi. "Mechanical Property of Biomedical Materials". W Novel Structured Metallic and Inorganic Materials, 385–97. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7611-5_26.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Baik, Ku Youn, Chang Ho Kim, Suk Yi Woo, Sae Chae Jeoung i Kwang-Sup Soh. "Membrane Mechanical Property of Primo Microcells". W The Primo Vascular System, 157–61. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0601-3_22.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

McHargue, Carl J. "Mechanical Property Determination Using Nanoindentation Techniques". W Tribology Issues and Opportunities in MEMS, 487–508. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5050-7_36.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

McHargue, Carl J. "Breakout Session Report: Mechanical Property Measurements". W Tribology Issues and Opportunities in MEMS, 629–32. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5050-7_50.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fujiyama, Mitsuyoshi. "Morphology-mechanical property relationships in injection molding". W Polymer Science and Technology Series, 519–26. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4421-6_70.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Mechanical property"

Steen, Marc, i Constantina Filiou. "Mechanical Property Scatter in CFCCs". W ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-319.

Pełny tekst źródła

Streszczenie:

The tensile response of continuous fibre reinforced ceramic matrix composites (CFCCs) is not expected to show the large variation in strength properties commonly observed for monolithic ceramics. Results of recent investigations on a number of 2D reinforced CFCCs have nevertheless revealed a considerable scatter in the initial elastic modulus, in the first matrix cracking stress and in the failure stress. One school of thought considers that the observed variability is caused by experimental factors. Elaborate testing programmes have been set up to clarify the origins of this scatter by investigation of the effects of control mode, loading rate, specimen shape, etc.. Another school explains the scatter by the presence of (axial) residual stresses in the fibres and in the matrix. Although plausible, this hypothesis is difficult to verify because experimental determination of the residual stress state in CFCCs is not straightforward. In addition, with the available methods it is impractical to determine the residual stresses in every test specimen. This approach is indeed required for establishing the relationship between the magnitude of the residual stresses and the experimentally observed scatter. At IAM a method has been developed and validated which allows to quantify the axial residual stress state in individual CFCC specimens by subjecting them to intermittent unloading-reloading cycles. The method as well as the derived relationship between residual stress state and scatter in mechanical response will be presented.

Style APA, Harvard, Vancouver, ISO itp.

Suda, Mitsunori, Takanori Kitamura, Ratchaneekorn Wongpajan i Zhiyuan Zhang. "Effect of Paper Property on Mechanical Property of Paper Tube". W ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51392.

Pełny tekst źródła

Streszczenie:

Paper recycling is an effective way in reducing deforestation and energy consumption. Therefore recycling paper and paper products has been widely applied in many areas, such as packaging industry, film rolls, adhesive-tape industry, furniture decoration and temporary structures in building. They can be produced into various structure according to different requirement, such as paper tube, corrugated paperboard and normal paperboard. Paper-tubes gain more and more applications as a traditional structure due to their excellent mechanical property and environmentally friendly property. In order to meet various needs of paper-tube and produce high performance paper-tubes, designing for paper-tubes fabrication is needed. It is necessary to research the lateral compression strength of paper tube because various paper-tubes are used as packages, cores, poles and structure materials. To establish a relation of mechanical property between paperboards and paper-tubes is an important aspect. The current study is to investigate this relation. Paperboards are built from cellulose fibers jointed by hydrogen bonds and some additional elements like talc. The fibers are distributed randomly on the paperboards. However due to the tension action during fabrication process, more fibers are distributed in machine rolling direction which is defined as machine direction (MD, TD for transverse direction). The material expresses obvious anisotropic property. On the other hand, due to the laminated structure of paper materials, it is possible to generate interlaminar fracture in the usage process, especially in the construction made of paper such as paper tubes. The mechanical property of three kinds of paperboards used for paper-tubes fabrication was investigated included tension, compression and peeling combining with anisotropic property. These three kinds of paperboards have different mechanical properties but same dimension for paper-tubes fabrications. By this method, the effects of different properties including tension, compression and peeling on mechanical property of paper-tube could be evaluated. A series of paper-tubes with different layers was fabricated and the lateral compression test was carried out and evaluated. The fracture form of paper-tubes and fracture position on paper-tube were discussed together with paperboards. The cause of delamination behavior of laminated paper was analysis based on the detailed observation. The optical observation were employed to evaluate the fracture properties of paper-tubes after lateral compression test. It was found that the initial fracture of paper-tubes occurred inside the paperboards rather than between layers and the peeling property of paperboard has a signification effects on lateral compression property of paper-tubes.

Style APA, Harvard, Vancouver, ISO itp.

Li, Xiuguang, Fan Zhang, Shengchang Ji, Zhiyuan Pan, Weifeng Lu i Cao Zhan. "Mechanical property of degraded insulation spacers through dynamic mechanical analyzer". W 2017 IEEE 19th International Conference on Dielectric Liquids (ICDL). IEEE, 2017. http://dx.doi.org/10.1109/icdl.2017.8124669.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Reddy, B. R., Ashok Kumar Santra, David Eugene McMechan, Dennis W. Gray, Chad Brenneis i Rick Dunn. "Cement Mechanical Property Measurements Under Wellbore Conditions". W SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/95921-ms.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tao Chen, Lin Zhang, Jian Wu, Shibing Liu i Tiechuan Zuo. "A compact microstructure mechanical property measuring system". W 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2008. http://dx.doi.org/10.1109/nems.2008.4484275.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shoop, S., W. Wieder i B. Elder. "Mechanical Property Measurements on Various Snow Surfaces". W 18th International Conference on Cold Regions Engineering and 8th Canadian Permafrost Conference. Reston, VA: American Society of Civil Engineers, 2019. http://dx.doi.org/10.1061/9780784482599.038.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shen, Hui, i Ahmed Abdel-Mohti. "Mechanical Property Studies of Nanolayered Polymer Membranes". W 2nd International Electronic Conference on Materials. Basel, Switzerland: MDPI, 2016. http://dx.doi.org/10.3390/ecm-2-e001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fan, Y. F., J. Zhou i Z. Q. Hu. "Study on Mechanical Property of Corroded Pipeline". W International Conference on Pipeline Engineering and Construction. Reston, VA: American Society of Civil Engineers, 2007. http://dx.doi.org/10.1061/40934(252)23.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cardinale, Gregory F., i Randal W. Tustison. "Mechanical property measurement of polycrystalline diamond films". W SPIE Proceedings, redaktorzy Albert Feldman i Sandor Holly. SPIE, 1990. http://dx.doi.org/10.1117/12.22448.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gupta, Vikas, Jie-Hua Zhao, Darvin Edwards, Clay Dustin Mortensen, Colby Heideman, David C. Johnson, Kuan-Hsun Lu i Paul S. Ho. "Ultra low-k dielectric mechanical property characterization". W 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (I-THERM). IEEE, 2008. http://dx.doi.org/10.1109/itherm.2008.4544338.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Mechanical property"

Fielding, Randall, i Brady Mackowiak. U-10Mo Mechanical Property Study Results. Office of Scientific and Technical Information (OSTI), wrzesień 2017. http://dx.doi.org/10.2172/1466815.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Clark, Hart i Beavers. L52030 In-Situ Pipeline Mechanical Property Characterization. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), marzec 2005. http://dx.doi.org/10.55274/r0011148.

Pełny tekst źródła

Streszczenie:

The objective of this program is to identify reliable, field applicable nondestructive test methods that can be used for estimating the yield strength, tensile strength, and fracture toughness of line pipe steels. This will include the proper procedures and limitations for the equipment identified. Since a majority of the pipe that may not be properly documented is from older lines, this program is focused on Grade X60 or lower material.

Style APA, Harvard, Vancouver, ISO itp.

Freiman, S. W., D. C. Cranmer, E. R. Jr Fuller, W. Haller, M. J. Koczak, M. Barsoum, T. Palamides i U. V. Deshmukh. Mechanical property enhancement in ceramic matrix composites. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4073.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shoop, Sally, Wendy Wieder i Bruce Elder. Mechanical property measurements on various snow surfaces. Engineer Research and Development Center (U.S.), sierpień 2020. http://dx.doi.org/10.21079/11681/37695.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

McCabe, Rodney J. Strength Member/Liner Mechanical Property/Modeling Update. Office of Scientific and Technical Information (OSTI), sierpień 2012. http://dx.doi.org/10.2172/1050003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Freiman, S. W., T. W. Coyle, E. R. Fuller, P. L. Swanson, D. C. Cranmer i W. Haller. Mechanical property enhancement in ceramic matrix composites. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.ir.88-3798.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tiku, Pussegoda i Luffman. L52031 In-Situ Pipeline Mechanical Property Characterization. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2003. http://dx.doi.org/10.55274/r0011133.

Pełny tekst źródła

Streszczenie:

The focus in the present study was to establish whether there is a reasonable correlation between the Charpy Vee Notch (CVN) toughness and the non-destructive Potential Difference (PD) measurements of ferritic-pearlitic steels having a range of CVN toughness values. Complete material characterization was carried out for six steels procured for this program. The characterization included chemical analysis, microstructural information, tensile properties and CVN transition curves. In addition, most of the data including the CVN transition curves were available for five suitable pipe line steels from a recent publication in the literature.

Style APA, Harvard, Vancouver, ISO itp.

Garrison, Ben, Caleb Massey, Weiju Ren, Maxim Gussev, Tim Graening Seibert, R. Sitterson, Nathan Capps i Kory Linton. Mechanical properties of Zircaloy cladding tubes and contributions to M.E.T.A. mechanical property database. Office of Scientific and Technical Information (OSTI), sierpień 2023. http://dx.doi.org/10.2172/1997689.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Stinton, D., R. Lowden i R. Krabill. Mechanical property characterization of fiber-reinforced SiC matrix composites. Office of Scientific and Technical Information (OSTI), kwiecień 1990. http://dx.doi.org/10.2172/6937422.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Prince, Zachary, Dewen Yushu i Lynn Munday. Enhanced mechanical property evaluation using innovative data analytics capability. Office of Scientific and Technical Information (OSTI), czerwiec 2021. http://dx.doi.org/10.2172/1812088.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!