Gotowe bibliografie tematyczne / Mechanical computation

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Mechanical computation”

Autor: Grafiati
Data publikacji: 29 lipca 2024
Data aktualizacji: 30 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Mechanical computation”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Mechanical computation"

1

Laishram, Jummi, Daniela Avossa, Rajesh Shahapure i Vincent Torre. "Mechanical Computation in Neurons". Biophysical Journal 96, nr 3 (luty 2009): 628a—629a. http://dx.doi.org/10.1016/j.bpj.2008.12.3323.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Laishram, Jummi, Daniela Avossa, Rajesh Shahapure i Vincent Torre. "Mechanical computation in neurons". Developmental Neurobiology 69, nr 11 (15.09.2009): 731–51. http://dx.doi.org/10.1002/dneu.20733.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sathyan, Sabin, Ugur Aydin i Anouar Belahcen. "Acoustic Noise Computation of Electrical Motors Using the Boundary Element Method". Energies 13, nr 1 (3.01.2020): 245. http://dx.doi.org/10.3390/en13010245.

Pełny tekst źródła
Streszczenie:
This paper presents a numerical method and computational results for acoustic noise of electromagnetic origin generated by an induction motor. The computation of noise incorporates three levels of numerical calculation steps, combining both the finite element method and boundary element method. The role of magnetic forces in the production of acoustic noise is established in the paper by showing the magneto-mechanical and vibro-acoustic pathway of energy. The conversion of electrical energy into acoustic energy in an electrical motor through electromagnetic, mechanical, or acoustic platforms is illustrated through numerical computations of magnetic forces, mechanical deformation, and acoustic noise. The magnetic forces were computed through 2D electromagnetic finite element simulation, and the deformation of the stator due to these forces was calculated using 3D structural finite element simulation. Finally, boundary element-based computation was employed to calculate the sound pressure and sound power level in decibels. The use of the boundary element method instead of the finite element method in acoustic computation reduces the computational cost because, unlike finite element analysis, the boundary element approach does not require heavy meshing to model the air surrounding the motor.
Style APA, Harvard, Vancouver, ISO itp.
4

Newland, D. E., i Eric E. Ungar. "Mechanical Vibration Analysis and Computation". Journal of the Acoustical Society of America 88, nr 5 (listopad 1990): 2506. http://dx.doi.org/10.1121/1.400056.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Newland, D. E., i Andres Soom. "Mechanical Vibration Analysis and Computation". Journal of Applied Mechanics 59, nr 2 (1.06.1992): 469. http://dx.doi.org/10.1115/1.2899551.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Barr, A. D. S. "Mechanical vibration analysis and computation". Journal of Sound and Vibration 139, nr 3 (czerwiec 1990): 535–36. http://dx.doi.org/10.1016/0022-460x(90)90684-r.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Peng, Guoyi. "A Practical Combined Computation Method of Mean Through-Flow for 3D Inverse Design of Hydraulic Turbomachinery Blades". Journal of Fluids Engineering 127, nr 6 (1.07.2005): 1183–90. http://dx.doi.org/10.1115/1.2062787.

Pełny tekst źródła
Streszczenie:
A practical combined computation method of the circumferentially averaged mean through-flow is presented for 3D inverse computations of hydraulic turbomachinery blades to consider the influence of interrelated hydraulic components. A comprehensive computation domain including the runner blades and related components is adopted and the mean flow is calculated altogether by solving a set of rotational flow governing equations simultaneously. The method has been applied to the case of Kaplan turbine. Computational results were compared to experimental data and their agreement was confirmed. Numerical investigation indicates that the mean flow is dependent on the configuration of guide vanes and the effect of runner blades reaches to the far upstream. The importance of properly taking account of the effect of blade geometry and the influence of interrelated hydraulic components is demonstrated.
Style APA, Harvard, Vancouver, ISO itp.
8

Schoenauer, Marc, Leila Kallel i François Jouve. "Mechanical inclusions identification by evolutionary computation". Revue Européenne des Éléments Finis 5, nr 5-6 (styczeń 1996): 619–48. http://dx.doi.org/10.1080/12506559.1996.10511240.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Cai, Jiaze. "A Fully Mechanical Realization of PID Controller". Highlights in Science, Engineering and Technology 9 (30.09.2022): 319–28. http://dx.doi.org/10.54097/hset.v9i.1861.

Pełny tekst źródła
Streszczenie:
PID controller is one of the most widely used control elements in the industry. Over history, people have implemented the PID controller mechanically with pneumatical components, electronically in circuits, or digitally using DSP. However, the pure mechanical realization of PID controllers is rarely studied. This paper presents an analog PID controller based on mechanical computation components, including a mechanical integrator, a mechanical differentiator, mechanical constant multipliers, and a mechanical adder. In this work, those parts are studied respectively with CAE modeling and mathematical derivation. A novel design of mechanical differentiator is also introduced to conduct the calculation of the differential part on the PID controller. This work explores the theoretical possibility of a new form of PID controller realization, that is, applying the method of mechanical analog computation to the implementation of a PID controller.
Style APA, Harvard, Vancouver, ISO itp.
10

Ravani, B., i Q. J. Ge. "Computation of Spatial Displacements From Geometric Features". Journal of Mechanical Design 115, nr 1 (1.03.1993): 95–102. http://dx.doi.org/10.1115/1.2919331.

Pełny tekst źródła
Streszczenie:
This paper develops the theoretical foundation for computations of spatial displacements from the simple geometric features of points, lines, planes, and their combinations. Using an oriented projective three space with a Clifford Algebra, all these three features are handled in a similar fashion. Furthermore, issues related to uniqueness of computations and minimum number of required features are discussed. It is shown that contrary to the common intuition, specification of a minimum of four points (planes) or three lines are necessary for computation of a unique displacement. Only when the sense of the orientations of these features are specified then the minimum number of required features reduces to three for points and planes and two for lines. The results, in addition to their theoretical interest in computational geometry of motion, have application in robot calibration.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Mechanical computation"

1

Moore, Darren William. "Quantum state reconstruction and computation with mechanical networks". Thesis, Queen's University Belfast, 2017. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.728195.

Pełny tekst źródła
Streszczenie:
Networks of mechanical resonators embedded in the platform of optomechanics are studied in two quantum information contexts: quantum state reconstruction and measurement based quantum computation. The optomechanical setup considered consists of a harmonically interacting network of resonators one of which is coupled via radiation pressure to a resonant mode of a cavity electromagnetic field. We develop a protocol for reconstructing the state of the network from measurements on the output cavity field. An interaction profile tuned to a set of mechanical quadratures ensures that the cavity field carries a copy of the quadratures’ information. Homodyne detection of the output field provides measurement statistics directly linked to the statistics of the mechanical quadratures from which their marginals can be estimated and standard tomographic techniques applied, recovering the phase space distribution for the network. We provide a method for determining the interaction profiles required and analyse the effectiveness of the scheme for Gaussian states in the case of finite measurements. We also provide some further examples of state reconstruction in similar optomechanics settings. An equivalent setup is that in which the cavity field interacts simultaneously with a collection of non­interacting mechanical modes. Here we implement measurement based quantum computation, giving a summary of cluster state generation in optomechanics and providing a scheme for applying multimode Gaussian operations. Adapting QND measurements on movable mirrors we continuously monitor individual resonators in order to assess the feasibility of using indirect measurements for computation compared to projective measurements performed directly on the cluster. Using a linear cluster state of five modes and taking advantage of the decomposition of single-mode Gaussian operations into four steps, we perform a numerical assessment of a large array of experimental parameters, paring down the list until those that most significantly affect the outcome are distilled. These are the mechanical bath temperature, the mechanical dissipation rate and the cluster squeezing. They place strong restrictions on the experimental parameters in order to ensure high fidelities, with stronger requirements for more highly squeezed clusters. We conclude with a small discussion of currently available experimental settings and remarks on further research possibilities.
Style APA, Harvard, Vancouver, ISO itp.
2

Erhan, Inci. "Quantum Mechanical Computation Of Billiard Systems With Arbitrary Shapes". Phd thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/2/1104082/index.pdf.

Pełny tekst źródła
Streszczenie:
An expansion method for the stationary Schrodinger equation of a particle moving freely in an arbitrary axisymmeric three dimensional region defined by an analytic function is introduced. The region is transformed into the unit ball by means of coordinate substitution. As a result the Schrodinger equation is considerably changed. The wavefunction is expanded into a series of spherical harmonics, thus, reducing the transformed partial differential equation to an infinite system of coupled ordinary differential equations. A Fourier-Bessel expansion of the solution vector in terms of Bessel functions with real orders is employed, resulting in a generalized matrix eigenvalue problem. The method is applied to two particular examples. The first example is a prolate spheroidal billiard which is also treated by using an alternative method. The numerical results obtained by using both the methods are compared. The second exampleis a billiard family depending on a parameter. Numerical results concerning the second example include the statistical analysis of the eigenvalues.
Style APA, Harvard, Vancouver, ISO itp.
3

Su, Yunde. "High-fidelity Computation and Modeling of Turbulent Premixed Combustion". The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1595513943378125.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Ulrich, Karl T. "Computation and Pre-Parametric Design". Thesis, Massachusetts Institute of Technology, 1988. http://hdl.handle.net/1721.1/6845.

Pełny tekst źródła
Streszczenie:
My work is broadly concerned with the question "How can designs bessynthesized computationally?" The project deals primarily with mechanical devices and focuses on pre-parametric design: design at the level of detail of a blackboard sketch rather than at the level of detail of an engineering drawing. I explore the project ideas in the domain of single-input single-output dynamic systems, like pressure gauges, accelerometers, and pneumatic cylinders. The problem solution consists of two steps: 1) generate a schematic description of the device in terms of idealized functional elements, and then 2) from the schematic description generate a physical description.
Style APA, Harvard, Vancouver, ISO itp.
5

Chen, Chao 1974. "A direct kinematic computation algorithm for all planar 3-legged platforms /". Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33962.

Pełny tekst źródła
Streszczenie:
An analysis and comprehensive solution to the direct kinematics problem (DK) of all planar 3-legged platforms with lower pairs, called general planar Stewart-Gough platform (PSGP), is presented. There are 10 types of PSGP DK problem formulation including those with mixed leg architecture.
Planar kinematic mapping expresses pole position and rotation angle of a planar displacement as a point in 3-dimensional projective space represented by 4 homogeneous coordinates. This provides a universal tool for kinematic analysis. Its application will be demonstrated in the derivation of a general algorithm for planar DK. For each type of PSGP, the problem is reduced to a 6th order univariate polynomial whose roots reveal all solutions. An example of a PSGP with 6 real assembly configurations is presented. Furthermore, this algorithm was implemented and tested exhaustively. A complete self-contained version, coded in C, is available at http://www.cim.mcgill.ca/∼paul/. It should be easy to customize and adapt to any given real time micro-controller application.
Style APA, Harvard, Vancouver, ISO itp.
6

Kalakkad, Jayaraman Suganth Kumar. "Computation of economic rebound effect in different sectors of the U.S. economy". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/46068.

Pełny tekst źródła
Streszczenie:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.
Includes bibliographical references.
Economic rebound effect is the phenomenon in which price reduction in products and services, induced by energy efficiency increase will cause more consumption leading to an "eat away" of the potential decreases in energy usage. Several researchers have expressed their views on the existence of the effect and the related consequences of such an effect in the micro economic scale. It is recognized that the microeconomic rebound effect will depend on how the price of a good will vary when an efficiency increase is brought about and also on how the quantity consumed may vary when the price changes by a certain amount. A mathematical formulation for this effect is then developed and the two parameters required are found separately for two relevant sectors of the economy. In the first case, the rebound effect is evaluated for the US Aluminum production sector taking into consideration both primary and secondary production. Several models for determining the price elasticity of demand are developed and the share of energy cost in total costs is also found in order to estimate the rebound. The values indicate very low rebound effect in the aluminum industry. A similar trial is conducted for system wide U.S air travel and the rebound estimates are arrived at. Low to moderate take back is observed in this case due to the increased price elasticity unlike the aluminum case where a very low price elasticity of demand pulled down rebound values. In the final sections of the report, discussions including the future trends in rebound effect in the wake of the higher fuel prices and low cost product introduction etc are made. A qualitative description of the macroeconomic rebound effect is also made and conclusions regarding the presence and significance of this effect are drawn. In summarizing it is inferred that even if the rebound effect is statistically significant, it cannot be big enough to completely mask the gains in efficiency improvement. Hence efficiency improvement is inferred as a definite method to decrease energy usage despite the fact that it has its own effectiveness limit set by the rebound.
by Suganth Kumar Kalakkad Jayaraman.
S.M.
Style APA, Harvard, Vancouver, ISO itp.
7

Razavi, Seyed Esmail. "Far field boundary conditions for computation of compressible aerodynamic flows". Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28896.

Pełny tekst źródła
Streszczenie:
The formulation and implementation of a far field boundary condition (FFBC) model for compressible flows is reported in this thesis. This FFBC model, developed for quasi-one-dimensional and two-dimensional flows, aims to permit a substantial reduction of the computational domain, leading to a considerable improvement in the computational efficiency. The present FFBC approach uses asymptotic expansions of the Riemann variables, which are truncated up to the required degree of accuracy. Then, the far field perturbation equations are integrated in time and applied in conjunction with the solution calculated within the computational domain. The propagating information from the computational domain is determined along the outgoing characteristic fronts, based on the estimation of the wave front orientation.
The proposed FFBC model is implemented in conjunction with an implicit finite-difference flow field solver using an alternating direction implicit (ADI) scheme for solving the Euler equations. The discretized form of the governing equations are solved using a time-marching technique until the steady-state solution is reached. An accurate procedure for the solid boundary treatment was also used.
The proposed FFBC model was used for solving typical problems of confined and external compressible flows in subsonic and transonic regimes. For the transonic regime, the proposed FFBC model has been extended for the case of non-isentrophic outgoing flows, which appear behind the shock waves. The solutions obtained are compared with previous theoretical and numerical results. This comparison shows that the proposed FFBC model can generate accurate solutions using a substantially reduced computational domain, which reduces by an order of magnitude the size of the block tridiagonal matrices to be inverted. This leads to a corresponding improvement in the overall computational efficiency.
Style APA, Harvard, Vancouver, ISO itp.
8

Chan, Godine Kok Yan. "Computation of nonlinear hydrodynamic loads on floating wind turbines using fluid-impulse theory". Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104254.

Pełny tekst źródła
Streszczenie:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 199-202).
Wind energy is one of the more viable sources of renewable energy and offshore wind turbines represent a promising technology for the cost effective harvesting of this abundant source of energy. To capture wind energy offshore, horizontal-axis wind turbines can be installed on offshore platforms and the study of hydrodynamic loads on these offshore platforms becomes a critical issue for the design of offshore wind turbine systems. A versatile and efficient hydrodynamics module was developed to evaluate the linear and nonlinear loads on floating wind turbines using a new fluid-impulse formulation - the Fluid Impulse Theory(FIT). The new formulation allows linear and nonlinear loads on floating bodies to be computed in the time domain, and avoids the computationally intensive evaluation of temporal and spatial gradients of the velocity potential in the Bernoulli equation and the discretization of the nonlinear free surface. The module computes linear and nonlinear loads - including hydrostatic, Froude-Krylov, radiation and diffraction, as well as nonlinear effects known to cause ringing, springing and slow-drift loads - directly in the time domain and a stochastic seastate. The accurate evaluation of nonlinear loads by FIT provides an excellent alternative to existing methods for the safe and cost-effective design of offshore floating wind turbines. The time-domain Green function is used to solve the linear and nonlinear free-surface problems and efficient methods are derived for its computation. The body instantaneous wetted surface is approximated by a panel mesh and the discretization of the free surface is circumvented by using the Green function. The evaluation of the nonlinear loads is based on explicit expressions derived by the fluid-impulse theory, which can be computed efficiently.
by Godine Kok Yan Chan.
Ph. D.
Style APA, Harvard, Vancouver, ISO itp.
9

Huang, Geng S. M. Massachusetts Institute of Technology. "Computation of safety control for hybrid system with applications to intersection collision avoidance system". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101543.

Pełny tekst źródła
Streszczenie:
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 69-74).
In this thesis, I consider the problem of designing a collision avoidance system for the scenario in which two cars approach an intersection from perpendicular directions. One of the cars is a human driven vehicle, and the other one is a semi-autonomous vehicle, equipped with a driver-assist system. The driver-assist system should warn the driver of the semi-autonomous vehicle to brake or accelerate if potential dangers of collision are detected. Then, if the system detects that the driver disobeys the warning, the system can override the behavior of the driver to guarantee safety if necessary. A hybrid automaton model with hidden modes is used to solve the problem. A disturbance estimator is used to estimate the driver's reaction to the warning. Then, with the help of a mode estimator, the hybrid system with hidden modes is translated to a hybrid system with perfect state information. Finally, we generalize the solution for the application example to the solution of safety control problem for general hybrid system with hidden modes when the hybrid system satisfies some proposed constraints and assumptions.
by Geng Huang.
S.M.
Style APA, Harvard, Vancouver, ISO itp.
10

Muñiz, Pablo E. (Muñiz Aponte). "Detection of launch frame in long jump videos using computer vision and discreet computation". Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/123277.

Pełny tekst źródła
Streszczenie:
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2019
Cataloged from PDF version of thesis.
Includes bibliographical references (page 44).
Pose estimation, a computer vision technique, can be used to develop a quantitative feedback training tool for long jumping. Key performance indicators (KPIs) such as launch velocity would allow a long jumping athlete to optimize their technique while training. However, these KPIs need a prior knowledge of when the athlete jumped, referred to as the launch frame in the context of videos and computer vision. Thus, an algorithm for estimating the launch frame was made using the OpenPose Demo and Matlab. The algorithm estimates the launch frame to within 0.8±0.91 frames. Implementing the algorithm into a training tool would give an athlete real-time, quantitative feedback from a video. This process of developing an algorithm to flag an event can be used in other sports as well, especially with the rise of KPIs in the sports industry (e.g. launch angle and velocity in baseball).
by Pablo E. Muniz.
S.B.
S.B. Massachusetts Institute of Technology, Department of Mechanical Engineering
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Mechanical computation"

1

Newland, D. E. Mechanical vibration analysis and computation. New York: Longman Scientific & Technical, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Newland, D. E. Mechanical vibration analysis and computation. Burnt Mill, Harlow, Essex, England: Longman Scientific & Technical, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Vučinić, Dean, Vidya Chandran, Alam Md Mahbub i C. B. Sobhan, red. Applications of Computation in Mechanical Engineering. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6032-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Tucker, Paul G. Computation of Unsteady Internal Flows: Fundamental Methods with Case Studies. Boston, MA: Springer US, 2001.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

William, Leigh, red. Structural Dynamics: Theory and Computation. Boston, MA: Springer US, 2004.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Oomens, C. W. J. Biomechanics: Concepts and computation. Cambridge: Cambridge University Press, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

(Firm), Knovel, i SpringerLink (Online service), red. Fluid dynamics: Theory, computation, and numerical simulation. Wyd. 2. New York: Springer, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Irkutsk), CAAM-90 International Seminar on Computer Algebra and Its Applications to Mechanics (1990 Novosibirsk and. CAAM-90 International Seminar on Computer Algebra and Its Applications to Mechanics: Novosibirsk, August 28-31, 1990, Irkutsk, September 1-3, 1990. Commack, N.Y: Nova Science Publishers, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

(Japan), Sangyō Kōzō Shingikai, red. Unfair trade, the complete report on unfair trade policies by Japan's major trading partners. Commack, N.Y: Nova Science Publishers, Inc., 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

American Society of Mechanical Engineers. Winter Meeting. Symbolic computation in fluid mechanics and heat transfer: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1988.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Mechanical computation"

1

Swade, Doron. "Mathematics and Mechanical Computation". W Philosophy of Engineering and Technology, 79–106. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-93779-3_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Draper, Thomas C., Claire Fullarton, Neil Phillips, Ben P. J. de Lacy Costello i Andrew Adamatzky. "Mechanical Sequential Counting with Liquid Marbles". W Unconventional Computation and Natural Computation, 59–71. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92435-9_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Feynman, Richard P., i Tony Hey. "Quantum Mechanical Computers". W Feynman Lectures on Computation, 169–92. Wyd. 2. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003358817-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Rojas, Raúl. "Babbage Meets Zuse: A Minimal Mechanical Computer". W Unconventional Computation and Natural Computation, 25–34. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41312-9_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Ladevèze, Pierre. "Modeling and Computation for Large Deformations". W Mechanical Engineering Series, 177–204. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-1432-8_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Hubbard, Allyn E., i David C. Mountain. "Analysis and Synthesis of Cochlear Mechanical Function Using Models". W Auditory Computation, 62–120. New York, NY: Springer New York, 1996. http://dx.doi.org/10.1007/978-1-4612-4070-9_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kerschen, Gaetan. "Computation of Nonlinear Normal Modes through Shooting and Pseudo-Arclength Computation". W Modal Analysis of Nonlinear Mechanical Systems, 215–50. Vienna: Springer Vienna, 2014. http://dx.doi.org/10.1007/978-3-7091-1791-0_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Tanaka, Kazuyuki. "Review of Sublinear Modeling in Probabilistic Graphical Models by Statistical Mechanical Informatics and Statistical Machine Learning Theory". W Sublinear Computation Paradigm, 165–275. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4095-7_10.

Pełny tekst źródła
Streszczenie:
AbstractWe review sublinear modeling in probabilistic graphical models by statistical mechanical informatics and statistical machine learning theory. Our statistical mechanical informatics schemes are based on advanced mean-field methods including loopy belief propagations. This chapter explores how phase transitions appear in loopy belief propagations for prior probabilistic graphical models. The frameworks are mainly explained for loopy belief propagations in the Ising model which is one of the elementary versions of probabilistic graphical models. We also expand the schemes to quantum statistical machine learning theory. Our framework can provide us with sublinear modeling based on the momentum space renormalization group methods.
Style APA, Harvard, Vancouver, ISO itp.
9

Jain, Appurva, i Abhishek Mishra. "Computation of Rupture Strain from Macroscopic Criteria". W Lecture Notes in Mechanical Engineering, 765–69. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5463-6_68.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Mane, Pradyumn, i Deepali Atheaya. "Levelized Cost Computation of Novel Thermoelectric Modules". W Lecture Notes in Mechanical Engineering, 51–62. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9678-0_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Mechanical computation"

1

Brasher, J. D. "Quantum mechanical computation". W Critical Review Collection. SPIE, 1994. http://dx.doi.org/10.1117/12.171197.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Itami, Teturo, Nobuyuki Matsui i Teijiro Isokawa. "Quantum Computation by Classical Mechanical Apparatuses". W 2020 4th Scientific School on Dynamics of Complex Networks and their Application in Intellectual Robotics (DCNAIR). IEEE, 2020. http://dx.doi.org/10.1109/dcnair50402.2020.9216939.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Goswami, A., M. A. Peshkin i J. E. Colgate. "Passive robotics: an exploration of mechanical computation". W Proceedings IEEE International Conference on Robotics and Automation. IEEE, 1990. http://dx.doi.org/10.1109/robot.1990.125987.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Goswami, Ambarish, Michael A. Peshkin i James Edward Colgate. "Passive Robotics: An Exploration of Mechanical Computation". W 1990 American Control Conference. IEEE, 1990. http://dx.doi.org/10.23919/acc.1990.4791230.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Rathish Kumar, B. V., T. Yamaguchi, H. Liu i R. Himeno. "Parallel Computation of LV Hemodynamics". W ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/fed-24965.

Pełny tekst źródła
Streszczenie:
Abstract Computer Visualization of hemodynamics in Left Ventricle (LV) is of great significance in treating patients with dilated cardiomyopathy. Numerical simulations that enable such graphical visualization are computationally very intensive. So in the current study we propose to discuss details of the parallel computation of LV flow dynamics on distributed memory based vector parallel processing system (VPP700) under UXP/VPPF90. Speedup and efficiency factors obtained by the present parallel computational strategy will be presented. Results pertaining to the parallel solution to steady flow dynamics in LV model will also be presented.
Style APA, Harvard, Vancouver, ISO itp.
6

Gyongyosi, Laszlo, Laszlo Bacsardi i Sandor Imre. "Novel Approach for Quantum Mechanical Based Autonomic Communication". W 2009 Computation World: Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns (COMPUTATIONWORLD). IEEE, 2009. http://dx.doi.org/10.1109/computationworld.2009.28.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Grace, Sheryl M., Douglas L. Sondak, Daniel J. Dorney i Michaela Logue. "CFD Computation of Fan Interaction Noise". W ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-43779.

Pełny tekst źródła
Streszczenie:
In this study, a 3-D, unsteady, Reynolds-averaged Navier-Stokes (RANS) CFD code coupled to an acoustic calculation is used to predict the contribution of the exit guide vanes to tonal fan noise downstream. The configuration investigated is that corresponding to the NASA Source Diagnostic Test (SDT) 22-in fan rig. One configuration from the SDT matrix is considered here: the approach condition, and outlet guide vane count designed for cut-off of the blade passage frequency. In this chosen configuration, there are 22 rotor blades and 54 stator blades. The stators are located 2.5 tip chords downstream of the rotor trailing edge. The RANS computations are used to obtain the spectra of the unsteady surface pressure on the exit guide vanes. The surface pressure at the blade passage frequency and its second harmonic are then integrated together with the Green’s function for an annular duct to obtain the pressure at locations in the duct. Comparison of the computed sound power level at the exhaust plane with experiment show good agreement at the cut-on circumferential mode. The results from this investigation validate the use of the CFD code along with the acoustic model for downstream fan noise predictions. This validation enables future investigations such as the effect of duct variation on the exhaust tonal power level and the validity of using this method for predicting broadband noise levels.
Style APA, Harvard, Vancouver, ISO itp.
8

Sabri, M. "Computation modelling of tire-road contact". W DISRUPTIVE INNOVATION IN MECHANICAL ENGINEERING FOR INDUSTRY COMPETITIVENESS: Proceedings of the 3rd International Conference on Mechanical Engineering (ICOME 2017). Author(s), 2018. http://dx.doi.org/10.1063/1.5046253.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Parsa, Atoosa, Sven Witthaus, Nidhi Pashine, Corey O'Hern, Rebecca Kramer-Bottiglio i Josh Bongard. "Universal Mechanical Polycomputation in Granular Matter". W GECCO '23: Genetic and Evolutionary Computation Conference. New York, NY, USA: ACM, 2023. http://dx.doi.org/10.1145/3583131.3590520.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

von Bremen, Hubertus F., i Michael J. Bonilla. "Computation of Lyapunov Characteristic Exponents Using Parallel Computing". W ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71757.

Pełny tekst źródła
Streszczenie:
In [1] a method to accurately compute the Lyapunov Characteristic Exponents of continuous dynamical systems of arbitrary dimensions was presented. However, it can be computationally expensive, because it requires the computation of the time derivatives of the entries of the exponential of a skew-symmetric matrix. In this paper, we present an implementation of the method in [1] that takes advantage of the fact that some of the computations can be done in parallel. The speedup in the computations depends on the number of CPU cores used and the computer memory. Numerical simulations show improvements in efficiency when using the parallel implementation. Our implementation retains the accuracy of the method in [1] with the added advantage of a speedup in computations. Numerical simulation results are presented for a dynamical system of dimension seven and one of dimension forty-nine.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Mechanical computation"

1

Raboin, P. J. Computational mechanics. Office of Scientific and Technical Information (OSTI), styczeń 1998. http://dx.doi.org/10.2172/15009523.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Goudreau, G. L. Computational mechanics. Office of Scientific and Technical Information (OSTI), marzec 1993. http://dx.doi.org/10.2172/10194488.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Goudreau, G. L. ,. LLNL. Computational mechanics. Office of Scientific and Technical Information (OSTI), luty 1997. http://dx.doi.org/10.2172/16316.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Riveros, Guillermo, Felipe Acosta, Reena Patel i Wayne Hodo. Computational mechanics of the paddlefish rostrum. Engineer Research and Development Center (U.S.), wrzesień 2021. http://dx.doi.org/10.21079/11681/41860.

Pełny tekst źródła
Streszczenie:
Purpose – The rostrum of a paddlefish provides hydrodynamic stability during feeding process in addition to detect the food using receptors that are randomly distributed in the rostrum. The exterior tissue of the rostrum covers the cartilage that surrounds the bones forming interlocking star shaped bones. Design/methodology/approach – The aim of this work is to assess the mechanical behavior of four finite element models varying the type of formulation as follows: linear-reduced integration, linear-full integration, quadratic-reduced integration and quadratic-full integration. Also presented is the load transfer mechanisms of the bone structure of the rostrum. Findings – Conclusions are based on comparison among the four models. There is no significant difference between integration orders for similar type of elements. Quadratic-reduced integration formulation resulted in lower structural stiffness compared with linear formulation as seen by higher displacements and stresses than using linearly formulated elements. It is concluded that second-order elements with reduced integration and can model accurately stress concentrations and distributions without over stiffening their general response. Originality/value – The use of advanced computational mechanics techniques to analyze the complex geometry and components of the paddlefish rostrum provides a viable avenue to gain fundamental understanding of the proper finite element formulation needed to successfully obtain the system behavior and hot spot locations.
Style APA, Harvard, Vancouver, ISO itp.
5

Lechman, Jeremy B., Andrew David Baczewski, Stephen Bond, William W. Erikson, Richard B. Lehoucq, Lisa Ann Mondy, David R. Noble i in. Computational Mechanics for Heterogeneous Materials. Office of Scientific and Technical Information (OSTI), listopad 2013. http://dx.doi.org/10.2172/1325910.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Borah, Bolindra N., Robert E. White, A. Kyrillidis, S. Shankarlingham i Y. Ji. Computational Methods in Continuum Mechanics. Fort Belvoir, VA: Defense Technical Information Center, listopad 1993. http://dx.doi.org/10.21236/ada278144.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Borah, Bolindra N., Robert E. White, A. Kyrillidis, S. Shankarlingham i Y. Ji. Computational Methods in Continuum Mechanics. Fort Belvoir, VA: Defense Technical Information Center, listopad 1993. http://dx.doi.org/10.21236/ada275560.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Patel, Reena. Complex network analysis for early detection of failure mechanisms in resilient bio-structures. Engineer Research and Development Center (U.S.), czerwiec 2021. http://dx.doi.org/10.21079/11681/41042.

Pełny tekst źródła
Streszczenie:
Bio-structures owe their remarkable mechanical properties to their hierarchical geometrical arrangement as well as heterogeneous material properties. This dissertation presents an integrated, interdisciplinary approach that employs computational mechanics combined with flow network analysis to gain fundamental insights into the failure mechanisms of high performance, light-weight, structured composites by examining the stress flow patterns formed in the nascent stages of loading for the rostrum of the paddlefish. The data required for the flow network analysis was generated from the finite element analysis of the rostrum. The flow network was weighted based on the parameter of interest, which is stress in the current study. The changing kinematics of the structural system was provided as input to the algorithm that computes the minimum-cut of the flow network. The proposed approach was verified using two classical problems three- and four-point bending of a simply-supported concrete beam. The current study also addresses the methodology used to prepare data in an appropriate format for a seamless transition from finite element binary database files to the abstract mathematical domain needed for the network flow analysis. A robust, platform-independent procedure was developed that efficiently handles the large datasets produced by the finite element simulations. Results from computational mechanics using Abaqus and complex network analysis are presented.
Style APA, Harvard, Vancouver, ISO itp.
9

Fried, Eliot, i Morton E. Gurtin. Continuum mechanical and computational aspects of material behavior. Office of Scientific and Technical Information (OSTI), luty 2000. http://dx.doi.org/10.2172/811358.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Fried, Eliot. Continuum Mechanical and Computational Aspects of Material Behavior. Office of Scientific and Technical Information (OSTI), luty 2015. http://dx.doi.org/10.2172/1325887.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Mechanical computation” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii