Gotowa bibliografia na temat „Mécanique des matrices”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Mécanique des matrices”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Mécanique des matrices"
Djeddi, Fadila, Mouloud Mohellebi i Ahmed Ouibrahim. "Optimisation des propriétés mécaniques de matériaux polymériques par les mélanges et effet bénéfique du vieillissement thermique". Matériaux & Techniques 107, nr 6 (2019): 604. http://dx.doi.org/10.1051/mattech/2020001.
Pełny tekst źródłaJuarez, Cesar, Gerardo Fajardo i Pedro Valdez. "Caractérisation microstructurale des fibres naturelles pour des matériaux composites à base de ciment". Canadian Journal of Civil Engineering 36, nr 3 (marzec 2009): 449–62. http://dx.doi.org/10.1139/l09-009.
Pełny tekst źródłaDjoudi, Tarek, Mabrouk Hecini, Daniel Scida, Youcef Djebloun i Belhi Guerira. "Caractérisation physique et mécanique du bois et des fibres issus d’une palme mûre de palmier dattier". Matériaux & Techniques 106, nr 4 (2018): 403. http://dx.doi.org/10.1051/mattech/2018056.
Pełny tekst źródłaPASTOUREAU, P. "Physiologie du développement du tissu osseux". INRAE Productions Animales 3, nr 4 (10.10.1990): 265–73. http://dx.doi.org/10.20870/productions-animales.1990.3.4.4385.
Pełny tekst źródłaBillaux, Daniel, i Fabian Dedecker. "Modélisation numérique des roches et fracturation : du continu au discontinu". Revue Française de Géotechnique, nr 155 (2018): 2. http://dx.doi.org/10.1051/geotech/2018006.
Pełny tekst źródłaBurlion, Nicolas, Ismail Yurtdas i Frédéric Skoczylas. "Comportement mécanique et séchage de matériaux à matrice cimentaire". Revue Française de Génie Civil 7, nr 2 (luty 2003): 145–65. http://dx.doi.org/10.1080/12795119.2003.9692486.
Pełny tekst źródłaNaceur, Selmi, i Bel Hadj Salah Hedi. "Finite Element and Experimental Investigation of the Multipoint Flexible Hydroforming". Key Engineering Materials 554-557 (czerwiec 2013): 1290–97. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1290.
Pełny tekst źródłaDouarche, Carine, Virginie Bailleux, Catherine Even, Jean-Marc Allain, Christophe Regeard i Éric Raspaud. "La mécanique des biofilms à la surface de liquides". Reflets de la physique, nr 56 (styczeń 2018): 20–24. http://dx.doi.org/10.1051/refdp/201856020.
Pełny tekst źródłaPedro, L. S., J. C. Dupla, J. Canou, L. Dormieux i Y. Kazan. "Comportement mécanique d’un sol grossier à matrice sous cisaillement monotone". Revue Française de Géotechnique, nr 112 (2005): 35–42. http://dx.doi.org/10.1051/geotech/2005112035.
Pełny tekst źródłaMoulet, M. H., F. Gautier i J. C. Pascal. "Mesure des coefficients de la matrice de diffusion d'une jonction mécanique". Journal de Physique IV (Proceedings) 12, nr 11 (grudzień 2002): 153–60. http://dx.doi.org/10.1051/jp4:20020488.
Pełny tekst źródłaRozprawy doktorskie na temat "Mécanique des matrices"
Chabannet, Michel. "Gel interne de matrices cimentaires sous sollicitation mécanique". Lyon, INSA, 1994. http://www.theses.fr/1994ISAL0019.
Pełny tekst źródłaThis study deals with one of the main research backgrounds developed by the Mineral Materials Laboratory: the formulation of highly durable concretes. Usually, chemical air-entraining agents are used to improve the durability to winter environment of concrete. This addition leads to a drastic strength decrease. Therefore, to prevent from this phenomenon, the research goal was to find physical admixtures leading to a good durability of matrices. This study is divided into three parts. In the first part, the literature about behaviour of concrete in presence of freezing and thawing cycles is reviewed. The different types of water present in the matrix are one of the most important parameters governing that behaviour. In the second part, different types of physical admixtures are investigated by means of cement pastes. The results obtained show that the lower is the crystallinity of the matrix and at interfaces the better is the behaviour of the paste. The flexural strength of specimens is more adequate than the compressive strength to describe the behaviour of the paste. From these data, a damage parameter (D) can be computed. In the third part, the influence of metakaolin addition is analysed. Mortars are cast, containing or not air -entraining agents. They present a smaller cement to sand ratio than standard mortars in order to reproduce the actual cement to aggregates ratio of concrete. A special apparatus is developed to subject the samples to coup led thermal and mechanical stresses. The study of microstructures before and after testing allows to exp lain the good durability of mortars containing metakaolin
En-Nefkhaoui, Hakim. "Simulation numérique d'un écoulement visqueux incompressible dans une géometrie complexe par la méthode des matrices d'interpolation". Lille 1, 1994. http://www.theses.fr/1994LIL10055.
Pełny tekst źródłaFernagut, François. "Comportement plastique de matrices époxydes et de composites en relation avec leur structure moléculaire". Lille 1, 1990. http://www.theses.fr/1990LIL10190.
Pełny tekst źródłaVivet, Alexandre. "Renforcement des matrices polymères et des matériaux composites par des nanoparticules". Habilitation à diriger des recherches, Université de Caen, 2012. http://tel.archives-ouvertes.fr/tel-00778185.
Pełny tekst źródłaMoulet, Marie-Hélène. "Les jonctions en mécanique vibratoire : représentation par matrice de diffusion et caractérisation expérimentale pour des poutres assemblées". Le Mans, 2003. http://cyberdoc.univ-lemans.fr/theses/2003/2003LEMA1004.pdf.
Pełny tekst źródłaIn many engineering applications, assembled structures are widely used. These structures are composed of thin-walled members connected together by mechanical junctions, which characterisation is necessary to have a predictive model of the vibratory behaviour of assembled structure. Using the state vector formalism to describe the structural waves propagation in a bidimensional medium, a junction can be model intrinsically by a scattering matrix, which properties are studied in the bidimensional case. The case of a mono dimensional junction between two beams is developed: this junction couples extensional and bending waves. A measurement method of the coefficients of the scattering matrix is validated using a blocking mass junction. The study shows that slight modifications of the junction have a great influence on the scattering matrix coefficients
Giraudeau, Joan. "Relations entre la microstructure et le comportement mécanique de matrices polyamide 66 injectées". Thesis, Paris Sciences et Lettres (ComUE), 2016. http://www.theses.fr/2016PSLEM080/document.
Pełny tekst źródłaThis study focuses on polyamide 66 matrices, formed as injection molded plates. The aim of the study is to highlight existing interrelations between microstructural organization and mechanic behavior.At first, the analysis is limited to one plate. A microstructural mapping has been done, and shows a typical injection molded organization, with evolutions in thickness and injection directions. Therefore, some areas can be differentiated, the superficial ones, those in contact with the mold, where the crystallization is induced by thermal gradient and shear stresses quite important, contrary to bulk areas which have known more stable conditions. Evolutions along the injection direction are more subtle and seem to be induced by the transportation of matter or different pressure conditions during the injection process.These microstructural differences are reflected on the mechanical plan and evolutions in the same directions have been observed. It appears that crystallites dimensions, perfection levels, constraint of amorphous phase or crystallinity ratio all impact on mechanical properties, even if interrelations are complex and not easy to discriminate.The influence of humidity on polyamide 66 material has been observed and discussed. This parameter controls the position of the material relatively to its glass transition and determines the way microstructure is implicated in deformation mechanisms.Finally, the study has been extended to different processing conditions. Although the evolutions that have been noticed were very small, they have helped to refine the analysis and confirm some points
Poli, Charles. "Chaos ondulatoire en milieux ouverts : approche statistique par la théorie des matrices aléatoires non-hermitiennes". Nice, 2009. http://www.theses.fr/2009NICE4091.
Pełny tekst źródłaIn the field of Wave Chaos, statistics of ideal closed systems are nowadays well understood. However, much less is known for open systems, namely for systems those coupling to environment cannot be neglected anymore. Applying the Random Matrix Theory to the formalism of the effective Hamiltonian, spectral and spatial statistics of open chaotic systems are investigated analytically. Furthermore, theoretical predictions are checked systematically through numerical simulations of random matrices. In the spectral domain, the modifications induced by the openness on the spacings and the avoided crossings are illustrated using the resonance trapping effect. The well-known distributions of spacings and avoided crossings are generalized to open chaotic systems that allow to explain results based on microwave experiments. In the spatial domain, statistics of the non-orthogonal parameter, which measures the impact of the openness on the eigenfunctions of the effective Hamiltonian, are derived analytically and verified by numerical simulations modelling chaotic complexness parameter for a given resonance, is also obtained. This finding is confirmed through electrodynamics experiments
Tripa, Viorica-Mihaela. "Optimisation de coques axisymétriques : modélisation par matrices-transfert". Toulouse, INSA, 1995. http://www.theses.fr/1995ISAT0029.
Pełny tekst źródłaAlexandrov, Serguei. "Mécanique quantique matricielle et la théorie des cordes à deux dimensions dans des fonds non-triviaux". Paris 11, 2003. https://tel.archives-ouvertes.fr/tel-00003512.
Pełny tekst źródłaString theory is the most promising candidate for the theory unifying all interactions including gravity. It has an extremely difficult dynamics. Therefore, it is useful to study some its simplifications. One of them is non-critical string theory which can be defined in low dimensions. A particular interesting case is 2D string theory. On the one hand, it has a very rich structure and, on the other hand, it is solvable. A complete solution of 2D string theory in the simplest linear dilaton background was obtained using its representation as Matrix Quantum Mechanics. This matrix model provides a very powerful technique and reveals the integrability hidden in the usual CFT formulation. This thesis extends the matrix model description of 2D string theory to non-trivial backgrounds. We show how perturbations changing the background are incorporated into Matrix Quantum Mechanics. The perturbations are integrable and governed by Toda Lattice hierarchy. This integrability is used to extract various information about the perturbed system: correlation functions, thermodynamical behaviour, structure of the target space. The results concerning these and some other issues, like non-perturbative effects in non-critical string theory, are presented in the thesis
Chae, Hyun Sic. "Modelisation numerique de la circulation en milieux cotiers et estuariens par la methode des matrices d'interpolation (mmi) en coordonnees generalisees : Application à la Gironde". Caen, 1996. http://www.theses.fr/1996CAEN2020.
Pełny tekst źródłaKsiążki na temat "Mécanique des matrices"
Cazenave, Michel. Méthode des éléments finis: Approche pratique en mécanique des structures. Paris: Dunod, 2010.
Znajdź pełny tekst źródłaCrisanti, Andrea. Products of random matrices in statistical physics. Berlin: Springer, 1993.
Znajdź pełny tekst źródłaMelnikov, Yuri. Influence Functions and Matrices. CRC Press LLC, 2017.
Znajdź pełny tekst źródłaMelnikov, Yuri. Influence Functions and Matrices. CRC Press LLC, 2017.
Znajdź pełny tekst źródłaPilkey, Walter D. Formulas for Stress, Strain, and Structural Matrices. Wiley, 2004.
Znajdź pełny tekst źródłaPilkey, Walter D. Formulas for Stress, Strain, and Structural Matrices. Wiley & Sons, Incorporated, John, 2008.
Znajdź pełny tekst źródłaPilkey, Walter D. Formulas for Stress, Strain, and Structural Matrices. Wiley & Sons, Incorporated, John, 2008.
Znajdź pełny tekst źródłaFormulas for stress, strain, and structural matrices. Wyd. 2. Hoboken, NJ: John Wiley & Sons, 2005.
Znajdź pełny tekst źródłaNeumann, John Von. Mathematical Foundations of Quantum Mechanics. Princeton University Press, 1996.
Znajdź pełny tekst źródłaNeumann, John Von. Mathematical Foundations of Quantum Mechanics: New Edition. Princeton University Press, 2018.
Znajdź pełny tekst źródłaCzęści książek na temat "Mécanique des matrices"
"La mécanique des matrices". W Comprendre la mécanique quantique, 31–38. EDP Sciences, 2001. http://dx.doi.org/10.1051/978-2-7598-0175-6.c004.
Pełny tekst źródła"Max Born et la mécanique des matrices". W La théorie quantique en images, 128–29. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1697-2-074.
Pełny tekst źródła"Max Born et la mécanique des matrices". W La théorie quantique en images, 128–29. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1697-2.c074.
Pełny tekst źródłaLIU, Yu, Delong HE, Ann-Lenaig HAMON i Jinbo BAI. "Interface et interphase entre matrice époxyde et nanorenforts à base de carbone dans les nanocomposites". W Nanocomposites, 147–65. ISTE Group, 2021. http://dx.doi.org/10.51926/iste.9031.ch5.
Pełny tekst źródłaDOUMENG, Marie, Karl DELBÉ, Florentin BERTHET, Olivier MARSAN, Jean DENAPE i France CHABERT. "Effets de taille et de nature des charges sur les propriétés thermiques et mécaniques des composites à matrice PEEK". W Nanocomposites, 97–146. ISTE Group, 2021. http://dx.doi.org/10.51926/iste.9031.ch4.
Pełny tekst źródłaBEDOUI, Fahmi, Adoté Sitou BLIVI, Benhui FAN i Djimédo KONDO. "Effets de taille et propriétés physiques et mécaniques des polymères nanorenforcés". W Nanocomposites, 73–95. ISTE Group, 2021. http://dx.doi.org/10.51926/iste.9031.ch3.
Pełny tekst źródła"Chapitre 9. Évolution quantique et matrice de diffusion". W Intégrale de chemin en mécanique quantique : Introduction, 241–62. EDP Sciences, 2003. http://dx.doi.org/10.1051/978-2-7598-0275-3.c011.
Pełny tekst źródła"Une méthode intégrate de frontière tenant compte du comportement mécanique de la liaison hétérogenéité-matrice". W Interfaces in Cementitious Composites, 263–73. CRC Press, 1992. http://dx.doi.org/10.1201/9781482271256-36.
Pełny tekst źródła