Gotowa bibliografia na temat „Measurement”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Measurement”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Measurement"
Oleniacz, Grzegorz, Izabela Skrzypczak i Tomasz Świętoń. "ACCURACY OF RTN MEASUREMENT IN VARIOUS MEASUREMENT CONDITIONS". Zeszyty Naukowe Uniwersytetu Zielonogórskiego / Inżynieria Środowiska 166, nr 46 (3.07.2017): 16–24. http://dx.doi.org/10.5604/01.3001.0010.6029.
Pełny tekst źródłaŁętocha, Aneta, Tatiana Miller i Janusz Kalisz. "Influence of measurement areas selection on roughness parameters in burnished surfaces measurements". Mechanik, nr 5-6 (maj 2016): 552–53. http://dx.doi.org/10.17814/mechanik.2016.5-6.82.
Pełny tekst źródłaOberrecht, Stephen P., James G. Kohl i Duane L. Simonson. "OS7-14 Dynamic Complex Shear Modulus Measurements of Silicone Elastomers Containing Coated Clay Particles Using an Experimental Linear Rheometer(Stress and strain measurement IV,OS7 Stress and strain measurement,MEASUREMENT METHODS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 105. http://dx.doi.org/10.1299/jsmeatem.2015.14.105.
Pełny tekst źródłaBuchholz, F. I., W. Kessel i F. Melchert. "Noise power measurements and measurement uncertainties". IEEE Transactions on Instrumentation and Measurement 41, nr 4 (1992): 476–81. http://dx.doi.org/10.1109/19.155910.
Pełny tekst źródłaJudish, R. M. "Quality control of measurements—Measurement assurance". Proceedings of the IEEE 74, nr 1 (1986): 23–25. http://dx.doi.org/10.1109/proc.1986.13394.
Pełny tekst źródłaParekh, S. V. "The measurements column (antenna gain measurement)". IEEE Antennas and Propagation Magazine 32, nr 2 (kwiecień 1990): 41–44. http://dx.doi.org/10.1109/74.80503.
Pełny tekst źródłaKIDO, Ryo, i Kozo TAGUCHI. "Cellular Temperature Measurement by Dielectrophoretic Impedance Measurement Method". Journal of the Japan Society of Applied Electromagnetics and Mechanics 23, nr 3 (2015): 601–5. http://dx.doi.org/10.14243/jsaem.23.601.
Pełny tekst źródłaKroc, Edward. "Generalized measurement error: Intrinsic and incidental measurement error". PLOS ONE 18, nr 6 (29.06.2023): e0286680. http://dx.doi.org/10.1371/journal.pone.0286680.
Pełny tekst źródłaGowda S.L., Girish, Jayanth Kumar H.V., Anand Kuriyan Mathew, Veeresh G.S. i Cholenahally Nanjappa Manjunath. "Intraoperative Flow Measurement of Saphenous Vein Graft: Transit Time Flowmetry Measurement Versus Free Flow Measurement". Journal of Cardiovascular Medicine and Surgery 5, nr 1 (2019): 11–14. http://dx.doi.org/10.21088/jcms.2454.7123.5119.2.
Pełny tekst źródłaSu, Fei, i Xiaoxu Pan. "OS7-2 Stress measurement for ferromagnetic specimen using magnetoacoustic emission(Stress and strain measurement I,OS7 Stress and strain measurement,MEASUREMENT METHODS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 93. http://dx.doi.org/10.1299/jsmeatem.2015.14.93.
Pełny tekst źródłaRozprawy doktorskie na temat "Measurement"
Brougham, Thomas. "joint measurements on qubits and measurement correlation". Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.487858.
Pełny tekst źródłaPretorius, Shaun. "Development of flexible automotive measurement adaptors for the PQ25 VWSA platform". Thesis, Nelson Mandela Metropolitan University, 2009. http://hdl.handle.net/10948/1632.
Pełny tekst źródłaSturm, Anke. "Performance Measurement und Environmental Performance Measurement". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2000. http://nbn-resolving.de/urn:nbn:de:swb:14-994768126734-55001.
Pełny tekst źródłaBartsch, Christian [Verfasser]. "Flow-Adaptive Measurement Sequence for Pneumatic Probe Measurements / Christian Bartsch". München : Verlag Dr. Hut, 2017. http://d-nb.info/1149579595/34.
Pełny tekst źródłaYang, Xuan. "Distributed state estimation with the measurements of Phasor Measurement Units". Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4479/.
Pełny tekst źródłaSnethlage, Tim. "Balanciertes Performance measurement : Grundzüge eines an nachhaltigem Unternehmenserfolg orientierten Performance measurements /". Aachen : Shaker, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=010671315&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Pełny tekst źródłaGaete-Martinez, Victor. "Optical Measurement of Strang Geometry and Orientation and Their Influence on Oriented Strand Composite Formation Quality". Fogler Library, University of Maine, 2009. http://www.library.umaine.edu/theses/theses.asp?highlight=1&Cmd=abstract&ID=FTY2009-004.
Pełny tekst źródłaFagelson, Marc A. "Tinnitus Measurement". Digital Commons @ East Tennessee State University, 2005. https://dc.etsu.edu/etsu-works/1671.
Pełny tekst źródłaYang, Kimberly. "Correlating IVC Measurements with Intravascular Volume Changes at Three Distinct Measurement Sites". Thesis, The University of Arizona, 2014. http://hdl.handle.net/10150/315932.
Pełny tekst źródłaBedside ultrasound of the inferior vena cava (IVC) has grown to be an important tool in the assessment and management of critically ill patients. This study endeavors to examine which location along the IVC is most highly correlated with changes in intravascular volume status: (1) the diaphragmatic juncture (DJ) (2) two centimeters caudal to the hepatic vein juncture (2HVJ) or (3) left renal vein juncture (LRVJ). Data was collected in this prospective observational study on patients in the emergency department who were at least 16 years of age, being treated with intravenous fluids (IVF). Measurements of the IVC were recorded at each site during standard inspiratory and expiratory cycles, and again with the patient actively sniffing to decrease intrapleural pressures. IVF was then administered per the patient’s predetermined treatment, and the same six measurements were repeated after completion of fluid bolus. The difference in caval index (dCI) was calculated for all six data sets and correlated with the mL/kg of IVF administered. There was a statistically significant correlation between mL/kg of IVFs administered and dCI at all three sites (DJ: r = 0.354, p value = 0.0002; 2HVJ: r = 0.334, p value = 0.0003; LRVJ: r = 0.192, p value = 0.03). The greatest correlation between amount of fluids administered and dCI was observed along the IVC at the site 2 cm caudal to the juncture of the hepatic veins (2HVJ). This site is also where the largest change in diameter can be appreciated on ultrasound during intravascular volume resuscitation. Our data also suggests that every mL/kg of IVFs administered should change the dCI by 0.86-1.00%. This anticipated change in IVC diameter can be used to gauge a patient’s response to intravascular volume repletion.
Lee, Hyun. "Reliability evaluation of the BIFMA Chair Measurement Device". Thesis, Virginia Tech, 1996. http://hdl.handle.net/10919/44963.
Pełny tekst źródłaIn the last decade, most offices have been equipped with computers, and most office workers spend much of their time sitting in chairs. And recently, as many office workers complain of back pains, the importance ofproper sitting and of chair designs that provide comfortable and suitable sitting posture has become recognized widely.
One organization involved in the design of chairs is the Human Factors and Ergonomics Society (HFES) and its ANSIIHFES 100 committee. This committee has established the ANS/IHFES 100 standard for various types of furniture used at computer workstations, including chairs, desks, and tables. This committee also has designed the Chair Measurement Device (CMD) for specific assessments of seat height, seat depth, seat width, backrest height, backrest width, lumbar support, seat to back included angle, seat pan angle, armrest height, and armrest clearance, for the purpose of developing chairs in connection with other related furniture, such as computer desks. The CMD has been developed through the Business and Institutional Furniture Manufacturer's Association (BIFMA).
The purpose of this study was to evaluate the reliability of the CMD, for future use in evaluating chair design. Eight participants made specific measurements of three chairs over three measurement sessions. Six measurements were taken from each chair: lumbar support height, seat height, seat depth, backrest height, seat pan angle, and seat to back included angle. This experiment produced 2,160 data points, and standard deviation and confidence interval analysis was used to evaluate the inter-evaluator reliability (ie., consistency across the different evaluators) and the intra-evaluator reliability (i.e., consistency within an evaluator).
All standard deviations and 99% confidence intervals of the measurements were very small, implying that the measurements using the CMD were reliable across the evaluators, as well as within evaluators. The results also show that the procedure established for measurements was adequate for ANSIIHFES 100 compliance evaluations.
Master of Science
Książki na temat "Measurement"
Burnside, C. D. Electromagnetic distance measurement. Wyd. 3. Oxford: BSP Professional Books, 1991.
Znajdź pełny tekst źródłaNarens, Louis. Abstract measurement theory. Cambridge, Mass: MIT Press, 1985.
Znajdź pełny tekst źródła1922-, Suppes Patrick, red. Foundations of measurement. Mineola, N.Y: Dover, 2007.
Znajdź pełny tekst źródłaChesher, Andrew. Wefare measurement and measurement error. Bristol: University of Bristol, Department of Economics, 1999.
Znajdź pełny tekst źródłaBartholomew, David. Measurement. 1 Oliver's Yard, 55 City Road, London EC1Y 1SP United Kingdom: SAGE Publications Ltd, 2006. http://dx.doi.org/10.4135/9781446262481.
Pełny tekst źródłaKelly, Brendan. Measurement. Toronto, ON: Ontario Ministry of Education and Training, 1999.
Znajdź pełny tekst źródłaCorballis, Tim. Measurement. Wellington [N.Z.]: Victoria University Press, 2002.
Znajdź pełny tekst źródłaCunningham, Kevin. Measurement. Greensboro, North Carolina: Morgan Reynolds Publsihing, 2014.
Znajdź pełny tekst źródła(Firm), ETA/Cuisenaire, red. Measurement. Vernon Hills, IL: ETA/Cuisenaire, 2003.
Znajdź pełny tekst źródłaBouch, Debb. Measurement. London: National Research and Development Centre for Adult Literacy and Numeracy, 2007.
Znajdź pełny tekst źródłaCzęści książek na temat "Measurement"
Venkateshan, S. P. "Measurements and Errors in Measurement". W Mechanical Measurements, 3–45. Chichester, UK: John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781119115571.ch1.
Pełny tekst źródłaVenkateshan, S. P. "Measurements and Errors in Measurement". W Mechanical Measurements, 3–48. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73620-0_1.
Pełny tekst źródłaSchönfelder, Gert. "Measurement Errors, Measurement Accuracy and Measurement Parameters". W Sensors in Science and Technology, 793–802. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-34920-2_18.
Pełny tekst źródłaDalati, Serene. "Measurement and Measurement Scales". W Progress in IS, 79–96. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74173-4_5.
Pełny tekst źródłaLeat, Diana. "Missing Measurement, Misunderstanding Measurement?" W Philanthropic Foundations, Public Good and Public Policy, 107–20. London: Palgrave Macmillan UK, 2016. http://dx.doi.org/10.1057/978-1-137-48289-1_9.
Pełny tekst źródłaWohlin, Claes, Per Runeson, Martin Höst, Magnus C. Ohlsson, Björn Regnell i Anders Wesslén. "Measurement". W Experimentation in Software Engineering, 37–43. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29044-2_3.
Pełny tekst źródłaWellner, Marcel. "Measurement". W Elements of Physics, 1–12. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3860-8_1.
Pełny tekst źródłaCzichos, Horst. "Measurement". W Measurement, Testing and Sensor Technology, 3–23. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76385-9_1.
Pełny tekst źródłaSavva, Michalakis. "Measurement". W Pharmaceutical Calculations, 1–18. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20335-1_1.
Pełny tekst źródłaPenketh, F. E. "Measurement". W Work Out Numeracy, 58–63. London: Macmillan Education UK, 1987. http://dx.doi.org/10.1007/978-1-349-08605-4_5.
Pełny tekst źródłaStreszczenia konferencji na temat "Measurement"
"Electromagnetic measurements. Microwave measurement". W 2017 Radiation and Scattering of Electromagnetic Waves (RSEMW). IEEE, 2017. http://dx.doi.org/10.1109/rsemw.2017.8103683.
Pełny tekst źródła"Measurement in biomedicine [breaker page]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983565.
Pełny tekst źródła"Measurement of physical quantities [breaker page]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983534.
Pełny tekst źródła"Theoretical problems of measurement [breaker page]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983522.
Pełny tekst źródłaMatousek, D., O. Subrt i J. Hospodka. "Fibonacci charge pump design, test and measurement". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983554.
Pełny tekst źródłaRublik, F., i V. Witkovsky. "A goodness-of-fit test for uniform distribution with unknown limits". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983529.
Pełny tekst źródłaRost'akova, Z., i R. Rosipal. "Importance of the time alignment of the sleep probabilistic curves". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983528.
Pełny tekst źródła"[Front cover]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983515.
Pełny tekst źródła"[Title page]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983516.
Pełny tekst źródła"[Copyright notice]". W 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983517.
Pełny tekst źródłaRaporty organizacyjne na temat "Measurement"
Brennan, James. PR-50-104-R01 LNG Flow Measurement. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 1985. http://dx.doi.org/10.55274/r0011728.
Pełny tekst źródłaWolf, Zachary. Temperature Measurements in the Magnetic Measurement Facility. Office of Scientific and Technical Information (OSTI), grudzień 2010. http://dx.doi.org/10.2172/1000389.
Pełny tekst źródłaGeorge, Hawley i Owston. PR-015-09603-R01 LNG Measurement Uncertainty Analysis. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), wrzesień 2010. http://dx.doi.org/10.55274/r0010699.
Pełny tekst źródłaChoquette, Gary. PR000-22605-R01 Design Guideline for Retrofittable Inline Flow Measurement. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), luty 2024. http://dx.doi.org/10.55274/r0000054.
Pełny tekst źródłaCrocker, Malcolm, P. Raju i S. Yang. NPR199201 Standard Sound Power Level Specification and Measurement Procedure. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), październik 1992. http://dx.doi.org/10.55274/r0011640.
Pełny tekst źródłaWeier, Dennis R., i Allan F. Pardini. Evaluation of UT Wall Thickness Measurements and Measurement Methodology. Office of Scientific and Technical Information (OSTI), październik 2007. http://dx.doi.org/10.2172/1035013.
Pełny tekst źródłaCIE. CIE 250:2022 Spectroradiometric Measurement of Optical Radiation Sources. International Commission on Illumination, czerwiec 2022. http://dx.doi.org/10.25039/tr.250.2022.
Pełny tekst źródłaCavatorta, Elisa, i Orazio Attanasio. Innovations in measurement and the evaluation of human behaviour. Centre for Excellence and Development Impact and Learning (CEDIL), listopad 2022. http://dx.doi.org/10.51744/cmb9.
Pełny tekst źródłaAruoba, S. Boraǧan, Francis Diebold, Jeremy Nalewaik, Frank Schorfheide i Dongho Song. Improving GDP Measurement: A Measurement-Error Perspective. Cambridge, MA: National Bureau of Economic Research, kwiecień 2013. http://dx.doi.org/10.3386/w18954.
Pełny tekst źródłaMuckenthaler, F. J., R. R. Spencer, H. T. Hunter, J. L. Hull i A. Shono. Measurements for the JASPER Program Axial Shield Re-measurement Experiment. Office of Scientific and Technical Information (OSTI), marzec 1993. http://dx.doi.org/10.2172/432822.
Pełny tekst źródła