Gotowa bibliografia na temat „Material manufacturing”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Material manufacturing”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Material manufacturing"
Smith, Paul, i Allan Rennie. "Computer aided material selection for additive manufacturing materials". Virtual and Physical Prototyping 5, nr 4 (8.11.2010): 209–13. http://dx.doi.org/10.1080/17452759.2010.527556.
Pełny tekst źródłaEagar, Thomas W. "Materials Manufacturing". MRS Bulletin 17, nr 4 (kwiecień 1992): 27–34. http://dx.doi.org/10.1557/s0883769400041038.
Pełny tekst źródłaSHINTANI, Daisuke. "Material and Manufacturing Technology". Journal of the Society of Materials Science, Japan 63, nr 11 (2014): 812. http://dx.doi.org/10.2472/jsms.63.812.
Pełny tekst źródłaIKESHOJI, Toshi-Taka. "Multiple Material Additive Manufacturing". JOURNAL OF THE JAPAN WELDING SOCIETY 88, nr 6 (2019): 489–96. http://dx.doi.org/10.2207/jjws.88.489.
Pełny tekst źródłaMoslah Salman, Mohammed, i Mohammad Zohair Yousif. "MANUFACTURING GREEN CEMENTING MATERIAL". Journal of Engineering and Sustainable Development 23, nr 06 (1.11.2019): 55–69. http://dx.doi.org/10.31272/jeasd.23.6.5.
Pełny tekst źródłaJames, T. "Material ambitions [aerospace manufacturing]". Engineering & Technology 3, nr 11 (21.06.2008): 66–69. http://dx.doi.org/10.1049/et:20081109.
Pełny tekst źródłaJiayong, Yan, Liu Baorong, Yang Kai, Liu Hanliang, Zhang Bin, Zhang Lixin i Wang Cunyi. "Research of Materials and Manufacturing Technology System for On-orbit Manufacturing". E3S Web of Conferences 385 (2023): 01015. http://dx.doi.org/10.1051/e3sconf/202338501015.
Pełny tekst źródłaBarnett, Eric, i Clément Gosselin. "Weak support material techniques for alternative additive manufacturing materials". Additive Manufacturing 8 (październik 2015): 95–104. http://dx.doi.org/10.1016/j.addma.2015.06.002.
Pełny tekst źródłaP., KOŠŤÁL, MUDRIKOVÁ A. i VELÍŠEK K. "MATERIAL FLOW IN FLEXIBLE MANUFACTURING". International Conference on Applied Mechanics and Mechanical Engineering 13, nr 13 (1.05.2008): 111–20. http://dx.doi.org/10.21608/amme.2008.39731.
Pełny tekst źródłaChang, Sheng-Hung, Wen-Liang Lee i Rong-Kwei Li. "Manufacturing bill-of-material planning". Production Planning & Control 8, nr 5 (styczeń 1997): 437–50. http://dx.doi.org/10.1080/095372897235019.
Pełny tekst źródłaRozprawy doktorskie na temat "Material manufacturing"
Braconnier, Daniel J. "Materials Informatics Approach to Material Extrusion Additive Manufacturing". Digital WPI, 2018. https://digitalcommons.wpi.edu/etd-theses/204.
Pełny tekst źródłaShahbazi, Sasha. "MATERIAL EFFICIENCY MANAGEMENT IN MANUFACTURING". Licentiate thesis, Mälardalens högskola, Innovation och produktrealisering, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-28004.
Pełny tekst źródłaMEMIMAN
INNOFACTURE - innovative manufacturing development
Wan, Yen-Tai. "Material transport system design in manufacturing". Diss., Available online, Georgia Institute of Technology, 2006, 2006. http://etd.gatech.edu/theses/available/etd-03282006-231022/.
Pełny tekst źródłaDr. Yih-Long Chang, Committee Member ; Dr. Martin Savelsbergh, Committee Member ; Dr. Leon McGinnis, Committee Co-Chair ; Dr. Gunter Sharp, Committee Chair ; Dr. Doug Bodner, Committee Member ; Dr. Joel Sokol, Committee Member.
Goel, Anjali 1978. "Economics of composite material manufacturing equipment". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/31096.
Pełny tekst źródłaIncludes bibliographical references (p. 43).
Composite materials are used for products needing high strength-to-weight ratios and good corrosion resistance. For these materials, various composite manufacturing processes have been developed such as Automated Tow Placement, Braiding, Diaphragm Forming, Resin Transfer Molding, Pultrusion, Autoclave Curing and Hand Lay Up. The aim of this paper is to examine the equipment used for these seven processes and to produce a cost analysis for each of the processes equipment. Since many of these processes are relatively new or are fairly costly and specified to the customers need, much of the equipment is custom made to meet the requirements of the part being produced. Current pricing information for individual custom-built machines, as well as standard machinery has been provided here.
by Anjali Goel.
S.B.
Mullen, T. D. "Material flow control in complex manufacturing systems". Thesis, University of Strathclyde, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360792.
Pełny tekst źródłaKarmakar, Mattias. "Additive Manufacturing Stainless Steel for Space Application". Thesis, Luleå tekniska universitet, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-72901.
Pełny tekst źródłaZhu, Wenkai, i 朱文凱. "Concurrent toolpath planning for multi-material layered manufacturing". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42841446.
Pełny tekst źródłaZhu, Wenkai. "Concurrent toolpath planning for multi-material layered manufacturing". Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B42841446.
Pełny tekst źródłaEk, Kristofer. "Additivt tillverkat material". Thesis, KTH, Maskinkonstruktion (Inst.), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-152230.
Pełny tekst źródłaAbstractThis project treats Additive Manufacturing (AM) for metallic material and the question if it is suitable to be used in the aeronautics industry. AM is a relatively new production method where objects are built up layer by layer from a computer model. The art of AM allows in many cases more design freedoms that enables production of more weight optimized and functional articles. Other advantages are material savings and shorter lead times which have a large economic value.An extensive literature study has been made to evaluate all techniques on the market and characterize what separates the different processes. Also machine performance and material quality is evaluated, and advantages and disadvantages are listed for each technique. The techniques are widely separated in powder bed processes and material deposition processes. The powder bed techniques allow more design freedom while the material deposition techniques allow production of large articles. The most common energy source is laser that gives a harder and more brittle material than the alternative energy sources electron beam and electric arc.Two specific techniques have been selected to investigate further in this project. Electron Beam Melting (EBM) from Arcam and Wire fed plasma arc direct metal deposition from Norsk Titanium (NTiC). EBM is a powder bed process that can manufacture finished articles in limited size when no requirements are set on tolerances and surface roughness. NTiC uses a material deposition process with electric arc to melt wire material to a near-net shape. The latter method is very fast and can produce large articles, but have to be machined to finished shape. A material investigation have been made where Ti6Al4V-material from both techniques have been investigated in microscope and tested for hardness. For the EBM-material have also surface roughness and weldability been investigated since the limited building volume often requires welding. The materials have mechanical properties better than cast material with respect to strength and ductility, but not as good as wrought material. Test results show that the difference in mechanical properties in different directions is small, even though the material has an inhomogeneous macrostructure with columnar grains in the building direction. The EBM-material has a finer microstructure and a stronger material and, in combination with improved design freedom, this technique is most suitable for aerospace articles when the weldability is good and it is possible to surface work where requirements of the surface roughness are set.Keywords: Additive Manufacturing, Aeronautics, Titanium
Cheung, Hoi-hoi, i 張凱凱. "A multi-material virtual prototyping system". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B29727716.
Pełny tekst źródłaKsiążki na temat "Material manufacturing"
Tanchoco, J. M. A. Material Flow Systems in Manufacturing. Boston, MA: Springer US, 1994.
Znajdź pełny tekst źródłaTanchoco, J. M. A., red. Material Flow Systems in Manufacturing. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2498-4.
Pełny tekst źródłaTanchoco, Jose Mario Azaña, 1946-, red. Material flow systems in manufacturing. London: Chapman & Hall, 1994.
Znajdź pełny tekst źródłaNational SAMPE Technical Conference (17th 1985 Kiamesha Lake, N.Y.). Overcoming material boundaries. [Covina, Calif.]: Society for the Advancement of Material and Process Engineering, 1985.
Znajdź pełny tekst źródłaP, Stephens Matthew, red. Manufacturing facilities design and material handling. Wyd. 3. Columbus, Ohio: Pearson Prentice Hall, 2005.
Znajdź pełny tekst źródłaComposites manufacturing: Materials, product, and process engineering. Boca Raton, FL: CRC Press, 2002.
Znajdź pełny tekst źródłaSchey, John A. Material and process development for competitive manufacturing. Warrendale, Pa: Society of Automotive Engineers, 1988.
Znajdź pełny tekst źródłaKolarevic, Branko, i Kevin Klinger, red. Manufacturing Material Effects. Routledge, 2013. http://dx.doi.org/10.4324/9781315881171.
Pełny tekst źródłaCheng, Wenlong, Li Lu i Xiao Hong Zhu. Material Engineering and Manufacturing. Trans Tech Publications, Limited, 2018.
Znajdź pełny tekst źródłaPishchik, Valerian, Elena R. Dobrovinskaya i Leonid A. Lytvynov. Sapphire: Material, Manufacturing, Applications. Springer, 2010.
Znajdź pełny tekst źródłaCzęści książek na temat "Material manufacturing"
Gibson, Ian, David Rosen, Brent Stucker i Mahyar Khorasani. "Material Extrusion". W Additive Manufacturing Technologies, 171–201. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-56127-7_6.
Pełny tekst źródłaGibson, Ian, David Rosen, Brent Stucker i Mahyar Khorasani. "Material Jetting". W Additive Manufacturing Technologies, 203–35. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-56127-7_7.
Pełny tekst źródłaGibson, Ian, David Rosen i Brent Stucker. "Material Jetting". W Additive Manufacturing Technologies, 175–203. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4939-2113-3_7.
Pełny tekst źródłaGreenwood, Nigel R. "Material Handling". W Implementing Flexible Manufacturing Systems, 116–38. London: Macmillan Education UK, 1988. http://dx.doi.org/10.1007/978-1-349-07959-9_6.
Pełny tekst źródłaAwari, G. K., V. S. Kumbhar, R. B. Tirpude i S. W. Rajurkar. "Material Removal Processes". W Automotive Manufacturing Processes, 173–222. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003367321-7.
Pełny tekst źródłaGilani, Negar, Aleksandra Foerster i Nesma T. Aboulkhair. "Material Jetting". W Springer Handbook of Additive Manufacturing, 371–87. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20752-5_23.
Pełny tekst źródłaHaghighi, Azadeh. "Material Extrusion". W Springer Handbook of Additive Manufacturing, 335–47. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20752-5_21.
Pełny tekst źródłaSirotkin, O. S., i V. B. Litvinov. "Composite-material part joining". W Composite Manufacturing Technology, 219–83. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1268-0_6.
Pełny tekst źródłaMalhotra, Vasdev. "Material Handling for AMS". W Advanced Manufacturing Processes, 104–13. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003476375-10.
Pełny tekst źródłaSrivastava, Manu, Sandeep Rathee, Sachin Maheshwari i T. K. Kundra. "Additive Manufacturing Processes Utilizing Material Jetting". W Additive Manufacturing, 117–30. Boca Raton, FL : CRC Press/Taylor & Francis Group, 2019.: CRC Press, 2019. http://dx.doi.org/10.1201/9781351049382-9.
Pełny tekst źródłaStreszczenia konferencji na temat "Material manufacturing"
Tappan, Alexander, Robert Knepper i C. Lindsay. "Energetic Material Advanced Manufacturing." W Proposed for presentation at the 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter (SHOCK22) held July 10-15, 2022 in Anaheim, CA US. US DOE, 2022. http://dx.doi.org/10.2172/2003915.
Pełny tekst źródłaTanaka, Fumiaki, Hiroshi Sato, Naoki Yoshii i Hidefumi Matsui. "Materials Informatics for Process and Material Co-optimization". W 2018 International Symposium on Semiconductor Manufacturing (ISSM). IEEE, 2018. http://dx.doi.org/10.1109/issm.2018.8651132.
Pełny tekst źródłaLeung, Yuen-Shan, Huachao Mao i Yong Chen. "Approximate Functionally Graded Materials for Multi-Material Additive Manufacturing". W ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86391.
Pełny tekst źródłaChoi, S. H., Y. Cai i H. Cheung. "Reconfigurable Multi-material Layered Manufacturing". W CAD'14. CAD Solutions LLC, 2014. http://dx.doi.org/10.14733/cadconfp.2014.105-107.
Pełny tekst źródłaChoi, S. H. "Reconfigurable Multi-material Layered Manufacturing". W CAD'14 Hong Kong. CAD Solutions LLC, 2014. http://dx.doi.org/10.14733/cadconfp.2014.106-108.
Pełny tekst źródłaZhao, Y. K., T. Y. Chen, S. W. Su i C. F. Wu. "Heat insulation performance for application of phenolic resin foam material as construction material". W 5th International Conference on Responsive Manufacturing - Green Manufacturing (ICRM 2010). IET, 2010. http://dx.doi.org/10.1049/cp.2010.0450.
Pełny tekst źródłaMaseeh, Fariborz. "MEMaterial: a new microelectronic material deposition tool". W Microelectronic Manufacturing, redaktor Anant G. Sabnis. SPIE, 1994. http://dx.doi.org/10.1117/12.186783.
Pełny tekst źródłaGao, Yuan, Souha Toukabri, Ye Yu, Andreas Richter i Robert Kirchner. "Large area multi-material-multi-photon 3D printing with fast in-situ material replacement". W Laser 3D Manufacturing VIII, redaktorzy Henry Helvajian, Bo Gu i Hongqiang Chen. SPIE, 2021. http://dx.doi.org/10.1117/12.2583487.
Pełny tekst źródłaLiu, Jinning, Sandeep Mehta, Sonu L. Daryanani i Che-Hoo Ng. "Material study of indium implant under channel doping conditions". W Microelectronic Manufacturing, redaktorzy David Burnett, Dirk Wristers i Toshiaki Tsuchiya. SPIE, 1998. http://dx.doi.org/10.1117/12.323967.
Pełny tekst źródłaTaeusch, David R., i John M. Ruselowski. "Material Processing Laser Systems For Manufacturing". W 1986 Quebec Symposium, redaktorzy Walter W. Duley i Robert W. Weeks. SPIE, 1986. http://dx.doi.org/10.1117/12.938918.
Pełny tekst źródłaRaporty organizacyjne na temat "Material manufacturing"
Paul, F. W. Robot Assisted Material Handling for Shirt Collar Manufacturing - Automated Shirt Collar Manufacturing. Fort Belvoir, VA: Defense Technical Information Center, czerwiec 1992. http://dx.doi.org/10.21236/ada268284.
Pełny tekst źródłaDoelle, Klaus. New Manufacturing Method for Paper Filler and Fiber Material. Office of Scientific and Technical Information (OSTI), sierpień 2013. http://dx.doi.org/10.2172/1091089.
Pełny tekst źródłaMaddux, Gary A. Diminishing Manufacturing Sources and Material Shortages Research and Support. Fort Belvoir, VA: Defense Technical Information Center, październik 1999. http://dx.doi.org/10.21236/ada374459.
Pełny tekst źródłaWatts, Alden. Towards understanding material characteristics through the additive manufacturing arc. Office of Scientific and Technical Information (OSTI), lipiec 2019. http://dx.doi.org/10.2172/1593314.
Pełny tekst źródłaMURPH, SIMONA. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), październik 2020. http://dx.doi.org/10.2172/1676417.
Pełny tekst źródłaSESSIONS, HENRY. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), październik 2021. http://dx.doi.org/10.2172/1838344.
Pełny tekst źródłaChappell, Mark, Wu-Sheng Shih, Cynthia Price, Rishi Patel, Daniel Janzen, John Bledsoe, Kay Mangelson i in. Environmental life cycle assessment on CNTRENE® 1030 material and CNT based sensors. Engineer Research and Development Center (U.S.), wrzesień 2021. http://dx.doi.org/10.21079/11681/42086.
Pełny tekst źródłaO'Connor, Christopher. Navy Additive Manufacturing: Policy Analysis for Future DLA Material Support. Fort Belvoir, VA: Defense Technical Information Center, grudzień 2014. http://dx.doi.org/10.21236/ada620841.
Pełny tekst źródłaDuty, Chad E., Tom Drye i Alan Franc. Material Development for Tooling Applications Using Big Area Additive Manufacturing (BAAM). Office of Scientific and Technical Information (OSTI), marzec 2015. http://dx.doi.org/10.2172/1209207.
Pełny tekst źródłaSalzbrenner, Bradley, Brad Boyce, Bradley Howell Jared, Jeffrey Rodelas i John Robert Laing. Defect Characterization for Material Assurance in Metal Additive Manufacturing (FY15-0664). Office of Scientific and Technical Information (OSTI), luty 2016. http://dx.doi.org/10.2172/1237892.
Pełny tekst źródła