Gotowa bibliografia na temat „Local solidification conditions”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Local solidification conditions”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Local solidification conditions"
Sobolev, S. L. "Rapid solidification under local nonequilibrium conditions". Physical Review E 55, nr 6 (1.06.1997): 6845–54. http://dx.doi.org/10.1103/physreve.55.6845.
Pełny tekst źródłaSobolev, S. L. "Driving force for binary alloy solidification under far from local equilibrium conditions". Acta Materialia 93 (lipiec 2015): 256–63. http://dx.doi.org/10.1016/j.actamat.2015.04.028.
Pełny tekst źródłaDomeij, Björn, i Attila Diószegi. "Solidification Chronology of the Metal Matrix and a Study of Conditions for Micropore Formation in Cast Irons Using EPMA and FTA". Materials Science Forum 925 (czerwiec 2018): 436–43. http://dx.doi.org/10.4028/www.scientific.net/msf.925.436.
Pełny tekst źródłaSobolev, Sergey L., Mikhail G. Tokmachev i Yuri R. Kolobov. "Rapid Multicomponent Alloy Solidification with Allowance for the Local Nonequilibrium and Cross-Diffusion Effects". Materials 16, nr 4 (15.02.2023): 1622. http://dx.doi.org/10.3390/ma16041622.
Pełny tekst źródłaPlotkowski, A., K. Fezi i M. J. M. Krane. "Estimation of transient heat transfer and fluid flow for alloy solidification in a rectangular cavity with an isothermal sidewall". Journal of Fluid Mechanics 779 (14.08.2015): 53–86. http://dx.doi.org/10.1017/jfm.2015.424.
Pełny tekst źródłaGotterbarm, Martin R., Alexander M. Rausch i Carolin Körner. "Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing". Metals 10, nr 3 (28.02.2020): 313. http://dx.doi.org/10.3390/met10030313.
Pełny tekst źródłaMerchant, G. J., i S. H. Davis. "Kinetic Effects in Directional Solidification". Applied Mechanics Reviews 43, nr 5S (1.05.1990): S76—S78. http://dx.doi.org/10.1115/1.3120855.
Pełny tekst źródłaZimmermann, Gerhard, Viktor T. Vitusevych i Laszlo Sturz. "Microstructure Formation in AlSi6Cu4 Alloy with Forced Melt Flow Induced by a Rotating Magnetic Field". Materials Science Forum 649 (maj 2010): 249–54. http://dx.doi.org/10.4028/www.scientific.net/msf.649.249.
Pełny tekst źródłaHeckmann, C. J., W. Stets i G. Wolf. "Plate Fracture of Nodular Cast Iron". Key Engineering Materials 457 (grudzień 2010): 367–73. http://dx.doi.org/10.4028/www.scientific.net/kem.457.367.
Pełny tekst źródłaHuo, Miao, Chuyue Chen, Hangyue Jian, Wenchao Yang i Lin Liu. "The Stray Grains from Fragments in the Rejoined Platforms of Ni-Based Single-Crystal Superalloy". Metals 13, nr 8 (15.08.2023): 1470. http://dx.doi.org/10.3390/met13081470.
Pełny tekst źródłaRozprawy doktorskie na temat "Local solidification conditions"
Banos, Julien. "Modélisation du procédé de refusion à l’arc sous vide : Échanges thermiques et défauts de solidification". Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0117.
Pełny tekst źródłaThe Vacuum Arc Remelting (VAR) process is used in the production of high-added value metals such as titanium alloys or nickel-based superalloys for the aerospace industry. The control of solidification conditions is an important industrial issue in order to process ingots of adequate chemical homogeneity and free of solidification defects. The work presented in this manuscript aims at improving the description of heat exchanges in a VAR process model (SOLAR) and at proposing a new approach for the prediction of segregated channels type solidification defects. First, the description of the heat exchanges in the model between the electrode, the ingot, the mould and the cooling circuit has been improved. These modifications were validated by comparing the numerical results with measurements from real industrial melts. An original experimental apparatus for measuring the external mould temperature adapted to industrial melts was designed. This apparatus was used during an experimental campaign on an industrial site during the remelting of a titanium alloy. The measurements obtained were compared with the numerical results from SOLAR. These two activities led to a first implementation of the side-arcing phenomenon in the model. In parallel, a multi-scale numerical approach was developed to predict the formation of segregated channels as a function of local solidification conditions. A first study on a Sn-Pb alloy was carried out and a mathematical criterion was calculated from the results. This first study shows a much lower impact of the thermal gradient on the formation of segregated channels than that generally considered in the literature
Streszczenia konferencji na temat "Local solidification conditions"
Hope, Adam T., Hai-Lin Chen, João Pedro Oliveira i Carolin Fink. "Solidification and Homogenization Modeling of High Entropy Alloys". W HT 2017. ASM International, 2017. http://dx.doi.org/10.31399/asm.cp.ht2017p0302.
Pełny tekst źródłaVasileiou, A. N. "Investigating the suitability of using a single heat transfer coefficient in metal casting simulation: An inverse approach". W Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-128.
Pełny tekst źródłaSchulte-Fischedick, Jan, Rainer Tamme i Ulf Herrmann. "CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems". W ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/es2008-54101.
Pełny tekst źródłaRawlings, A. L. K., A. J. Birnbaum, J. G. Michopoulos, J. C. Steuben, A. P. Iliopoulos i H. Ryou. "Simulation Informed Effects of Solidification Rate on 316L Single Tracks Produced by Selective Laser Melting". W ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22451.
Pełny tekst źródłaYang, Zhuo, Brandon Lane, Yan Lu, Ho Yeung, Jaehyuk Kim, Yande Ndiaye i Sundar Krishnamurty. "Using Coaxial Melt Pool Monitoring Images to Estimate Cooling Rate for Powder Bed Fusion Additive Manufacturing". W ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/detc2022-89934.
Pełny tekst źródłaWang, G. X., Chengcai Yao i B. T. F. Chung. "On Physical Mechanisms of Mushy Zone Formation in Solidification of Pure Semitransparent Materials". W ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-1039.
Pełny tekst źródłaWan, Y. P., X. Y. Jiang, H. Zhang, S. Sampath, V. Prasad i J. R. Fincke. "Modeling of Oxidation of Plasma-Sprayed Molybdenum Coatings". W ITSC 2000, redaktor Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0135.
Pełny tekst źródłaKocherlakota, Pavan, i Jerome Savarimuthu. "Effect of Welding Conditions on TIG Welded AISI 304 Stainless Steels Using FEM and Experimental Methods". W ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61047.
Pełny tekst źródłaKavicka, Frantisek, Karel Stransky, Bohumil Sekanina, Jana Dobrovska i Josef Stetina. "Cooling of a Massive Casting of Ductile Cast-Iron and Its Numerical Optimization". W ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77914.
Pełny tekst źródłaWang, C., D. Sun, H. Zhang, L. Zheng i B. Yang. "Continuous Silicon Wafer Manufacturing by EFG Method". W ASME 2003 Heat Transfer Summer Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ht2003-47007.
Pełny tekst źródła