Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: LEAKY WAVEGUIDE.
Rozprawy doktorskie na temat „LEAKY WAVEGUIDE”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 27 najlepszych rozpraw doktorskich naukowych na temat „LEAKY WAVEGUIDE”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
1
Hou, Xiaobo Rosen Warren A. Daryoush Afshin S. "A leaky waveguide all-optical analog-to-digital converter /". Philadelphia, Pa. : Drexel University, 2004. http://dspace.library.drexel.edu/handle/1860/437.
Pełny tekst źródła
2
Pasik, Michael Francis. "An asymptotic analysis of a leaky parallel-plate waveguide". Diss., The University of Arizona, 1993. http://hdl.handle.net/10150/186163.
Pełny tekst źródłaStreszczenie:
An asymptotic analysis of a leaky parallel-plate waveguide is presented. The walls of the waveguide consist of bonded wire meshes which are modeled using a sheet impedance boundary condition. The fields are excited by magnetic line sources exterior to the waveguide. The wire meshes allow for coupling between the interior of the waveguide and the exterior region. In addition, each mesh can support a surface wave. We employ Fourier transform techniques to derive an integral representation for the magnetic field. We present various interpretations of the integral representation and evaluate the integral asymptotically using the method of steepest descents. The case of a pole near the saddle point is considered in detail. The integral is also evaluated numerically to determine the accuracy of the asymptotic results. The contributions to the radiation pattern of the structure from the surface-wave and leaky-wave poles, as well as the saddle point, are considered individually. The parameters of the structure are adjusted to exploit the contributions from the poles in the near far zone. The transient response of the structure to a double exponential pulse is also investigated. An alternative representation which is computationally efficient for computing the transient response in early time is derived. The use of the alternative representation for dense distributions of leaky-wave poles is also considered.
3
Smith, Nathan James. "Convergent beam waveguide studies of liquid crystals". Thesis, University of Exeter, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.366612.
Pełny tekst źródła
4
Jahagirdar, Dhananjay R. "Non-leaky conductor-backed coplanar waveguide-fed microstrip patch antennas". Thesis, University of Southampton, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241874.
Pełny tekst źródła
5
Gneiting, Scott Alexander. "Improved Leaky-Mode Waveguide Spatial Light Modulators for Three Dimensional Displays". BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6561.
Pełny tekst źródłaStreszczenie:
This thesis improves on the design of the leaky-mode spatial light modulator, LMW-SLM, presented by Dr. Smalley[1]. Improvements include: input coupling gratings, a pulsed laser input, output coupling gratings, and a 3D printed adjustable module for the stabilization of critical alignments. First, input coupling gratings reduce the cost of the LMW-SLM from $500 to around $2, a drop in cost of over two orders of magnitude. This enables multiple modulators to be used in a single display and allows for an inexpensive modular design to be created. Second, a pulsed laser input allows for image creation without the use of a polygon for derotation. Removal of the polygon allows for direct viewing of the LMW-SLM output enabling near-eye and flat panel displays. Third, output coupling gratings allow for bottom exit devices that are essential for thin substrates and flat panel displays. Fourth, the 3D printed module allows for the critical alignments of the LMW-SLM to become permanent. This in turns allows for transportation of the created displays without a trained technician by abstracting away the complexities of the device. The resulting changes simplify hardware, reduce cost, and enable the LMW-SLM to be modularized and the resulting 3D displays to be transportable. These improvements are made possible by the addition of a one new mask step during fabrication, a simple circuit design, and a 3D printed module designed in SOLIDWORKS. Included in this thesis as attachments are the MATLab, Eagle, and SOLIDWORKS files used to create the improved LMW-SLM.
6
Stevens, Robin A. "The optical characterisation of liquid crystals using a half leaky waveguide geometry". Thesis, University of Exeter, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.307290.
Pełny tekst źródła
7
Allayarov, Izzatjon [Verfasser], i Thomas [Akademischer Betreuer] Weiss. "Theory of leaky mode propagation in optical waveguide geometries / Izzatjon Allayarov ; Betreuer: Thomas Weiss". Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2020. http://d-nb.info/1217253513/34.
Pełny tekst źródła
8
Qaderi, Kamran. "Waveguide-Based Spatial Light Modulators for Use in Holographic Video Displays". BYU ScholarsArchive, 2018. https://scholarsarchive.byu.edu/etd/7054.
Pełny tekst źródłaStreszczenie:
Film display holograms typically diffract light over a wide enough view-angle to be viewed, directly, without intervening optics. However, all holographic video displays must use optics beyond the hologram surface to overcome the challenges of small display extent and low diffraction angle by using some form of demagnification and derotation. We report a leaky mode waveguide spatial light modulator (SLM) with sufficiently high angular diffraction to obviate the need for demagnification in scanned aperture systems. This was achieved by performing a number of experiments to determine the depth of the annealed, proton-exchanged waveguide which corresponded to a maximized diffracted angle. Diffraction sweeps were recorded in excess of 19.5° for 632.8 nm light which is above the 15° required for direct view display. Moreover, we present a paired set of waveguide SLMs capable of a maximum light deflection nearing 28° for red. This deflection, which is several times larger than the angular sweep of current, state-of-the-art modulators, is made possible by the unilateral, near-collinear waveguide nature of the leaky mode interaction. The ability to double angular output in this way, which is either not possible or not practical in other SLMs, is possible in leaky mode devices, thanks to the absence of zero-order light and the lack of high-order outputs. This combined structure has angular deflection high enough to enable color holographic video monitors that do not require angular magnification. Furthermore, the low cost and high angular deflection of these devices may make it possible to make large arrays for flat-screen video holography. One improvement that could be made to the current setup would be to increase the device's diffraction efficiency. One highly influential factor of diffraction efficiency for a Bragg-regime surface acoustic wave (SAW) grating is the length of the interaction between the light and the grating. In this work, we have shown that guided light in a reverse proton exchanged (RPE) waveguide experiences less loss. This enables us to create longer devices which eventually results in devices with higher diffraction efficiency. We have also researched on LCoS SLMs and used them for two different applications: (a) photophoretic-trap volumetric displays and (b) holographic video displays. In the first case, aberrations including spherical, astigmatism, and coma can make particles to trap tighter in the focal point of the beam. Also, a new approach for holographic computations is presented which uses the electromagnetic nature of light in Maxwell Equations to find a unique phase map for every specific 3D object in space.
9
Cox, Gavin J. "Techniques for pattern control of a dielectric rod antenna suitable for use in mobile communications". Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/12693.
Pełny tekst źródłaStreszczenie:
This thesis describes the development of antennas suitable for mobile coinmunication systems based on a dielectric rod antenna fed from circular waveguide. Pattern control of the antenna is implemented using a combination of Frequency Selective Surface (FSS) elements and metallic endcaps placed on the antenna Both linear and circular polarised feeds have been made for these antennas to ensure they are suitable for a wide range of applications. The suitability of the dominant and next, higher order, waveguide mode were investigated and conclusions drawn as to their suitability for this type of antenna. The antennas were extensively modelled using a commercial TLM based solver and the results of these simulations were compared to the comprehensive set of antenna pattern measurements and S-parameter measurements obtained for the prototype antennas.
10
Engelbrecht, Julia Maria. "Ein Beitrag zur funkgestützten Indoor-Positionierung auf der Basis von Leckwellenleitern in Fahrgastzellen". Doctoral thesis, Technische Universität Dresden, 2016. https://tud.qucosa.de/id/qucosa%3A31900.
Pełny tekst źródłaStreszczenie:
In dieser Arbeit wird der Einsatz von Leckwellenleiter (engl. Leaky Coaxial Cable, LCX) zur funkgestützten Indoor-Positionierung in Fahrgastzellen untersucht. Mit Hilfe eines erstellten Vorgehensmodells werden zwei unterschiedliche LCX-Prototypen speziell für den Ortungseinsatz entwickelt. Hierbei wird die elektromagnetische Feldberechnung verwendet, um sowohl Leckwellenleiterstrukturen als auch deren Einsatz in einer Fahrgastzelle zu bewerten. Nach Fertigung beider Leckwellenleiter erfolgt eine messtechnische Validierung in einer vordefinierten Fahrgastzellenumgebung. Der Einsatz dieser Prototypen zur Indoor-Positionierung wird sowohl in Modell- als auch in realen Fahrzeugumgebungen, wie der AutoTram Extra Grand des Fraunhofer IVI, durchgeführt. Eine statistische Betrachtung von Messergebnissen sowie
die Vorstellung eines zonenselektiven Positionierungsansatzes schließen diese Arbeit.
11
茂幸, 西村, i Shigeyuki Nishimura. "遮断TEおよびTMモードを用いた右手/左手系複合導波管の伝送・放射特性". Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13097319/?lang=0, 2018. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13097319/?lang=0.
Pełny tekst źródłaStreszczenie:
本論文では，遮断周波数以下のTE・TMモードを利用した右手/左手系複合円筒導波管および方形導波管を提案する．この提案したCRLH導波管にスリットまたはスロットを設けることで構成された導波管型漏洩波アンテナの放射特性について述べている．最後に，CRLH導波管を試作し解析結果と実験結果の比較を行うことで，CRLH方形・円筒導波管の構成法の有用性を明らかにする．This paper proposes a composite right/left-handed cylindrical and rectangular waveguides using the cutoff TE and TM modes. The CRLH waveguides can be successfully applied to radiation characteristics of leaky-wave antenna by setting slits or slots. Finally, usefulness of the proposed CRLH waveguides is verified by comparison between the calculated and the measured values.
博士(工学)
Doctor of Philosophy in Engineering
同志社大学
Doshisha University
12
Mikulin, Dominic Josef. "Characterising liquid crystal cells by fitting half-leaky guided mode data using genetic algorithms". Thesis, University of Exeter, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361320.
Pełny tekst źródła
13
McSweeney, Matthew J. P. "The optical characterisation of liquid crystal structures". Thesis, University of Exeter, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337747.
Pełny tekst źródła
14
Gallezot, Matthieu. "Simulation numérique du contrôle non-destructif des guides d’ondes enfouis". Thesis, Ecole centrale de Nantes, 2018. http://www.theses.fr/2018ECDN0040/document.
Pełny tekst źródłaStreszczenie:
De nombreux éléments de structures de génie civil sont élancés et partiellement enfouis dans un milieu solide. Les ondes guidées sont souvent utilisées pour le contrôle non destructif (CND) de ces éléments. Ces derniers sont alors considérés comme des guides d’ondes ouverts, dans lesquels la plupart des ondes sont atténuées par des fuites dans le milieu environnant. D’autre part le problème est non borné, ce qui le rend difficile à appréhender sur le plan numérique. La combinaison d’une approche par éléments finis semi-analytique (SAFE) et de la méthode des couches parfaitement adaptées (PML) a été utilisée dans une thèse antérieure pour calculer numériquement trois types de modes (modes piégés, modes à fuite et modes de PML). Seuls les modes piégés et à fuite sont utilisés pour la représentation des courbes de dispersion. Les modes de PML sont non intrinsèques à la physique. L’objectif premier de cette thèse est d’obtenir, par superposition modale sur les modes calculés, les champs émis et diffracté dans les guides d’ondes ouverts. Nous montrons dans un premier temps que les trois types de modes appartiennent à la base modale. Une relation d’orthogonalité est obtenue dans la section du guide(incluant la PML) pour garantir l’unicité des solutions. La réponse forcée du guide peut alors être calculée rapidement par une somme sur les modes en tout point du guide. Des superpositions modales sont également utilisées pour construire des frontières transparentes au bord d’un petit domaine élément fini incluant un défaut, permettant ainsi de calculer le champ diffracté. Au cours de ces travaux, nous étudions les conditions d’approximation des solutions par des superpositions modales, limitées seulement aux modes à fuite, ce qui permet de réduire le coût des calculs. De plus, la généralité des méthodes proposées est démontrée par des calculs hautes fréquences (intéressantes pour le CND) et sur des guides tridimensionnels. Le deuxième objectif de cette thèse est de proposer une méthode d’imagerie pour la localisation de défauts. La méthode de l’imagerie topologique est appliquée aux guides d’ondes. Le cadre théorique général, de type optimisation sous contrainte, est rappelé. Le formalisme modal permet un calcul rapide de l’image. Nous l’appliquons pour simuler un guide d’onde endommagé, et nous montrons l’influence du type de champ émis (monomodal, dispersif,multimodal) ainsi que des configurations de mesure sur la qualité de l’image obtenueVarious elements of civil engineering structures are elongated and partially embedded in a solid medium. Guided waves can be used for the nondestructive evaluation (NDE) of such elements. The latteris therefore considered as an open waveguide, in which most of waves are attenuated by leakage losses into the surrounding medium. Furthermore, the problem is difficult to solve numerically because of its unboundedness. In aprevious thesis, it has been shown that the semi-analytical finite-element method (SAFE) and perfectly matched layers(PML) can be coupled for the numerical computation of modes. It yields three types of modes: trapped modes,leaky modes and PML modes. Only trapped and leaky modes are useful for the post-processing of dispersion curves. PML modes are non-intrinsic to the physics. The major aim of this thesis is to obtain the propagated and diffracted fields, based on modal superpositions on the numerical modes. First, we show that the three types of modes belong to the modal basis. To guarantee the uniqueness of the solutions an orthogonality relationship is derived on the section including the PML. The forced response can then be obtained very efficiently with a modal expansion at any point of the waveguide. Modal expansions are also used to build transparent boundaries at the cross-sections of a small finite-element domain enclosing a defect, thereby yielding the diffracted field. Throughout this work, we study whether solutions can be obtained with modal expansions on leaky modes only, which enables to reduce the computational cost. Besides, solutions are obtained at high frequencies (which are of interest for NDE) and in tridimensional waveguides, which demonstrates the generality of the methods. The second objective of this thesis is to propose an imaging method to locate defects. The topological imaging method is applied to a waveguide configuration. The general theoretical framework is recalled, based on constrained optimization theory. The image can be quickly computed thanks to the modal formalism. The case of a damaged waveguide is then simulated to assess the influence on image quality of the emitted field characteristics (monomodal, dispersive or multimodal)and of the measurement configuration
15
Zeng, Guan-Ling, i 曾冠菱. "Dual-Polarized Slotted Conductor-Backed Coplanar Waveguide Leaky-Wave Antenna". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/85695786639881797377.
Pełny tekst źródłaStreszczenie:
碩士國立交通大學
電信工程研究所
104
Conductor-backed coplanar waveguide (CBCPW) propagates electromagnetic waves via dominant modes (coplanar waveguide mode), and excites leaky wave which propagates toward both sides despite the value of the frequency. In general, there are two applications based on this structure: first is to use such property to design the antenna; the other is to suppress the leaky wave through some methods in order to decrease the unnecessary couplings and crosstalk. Implementing the full wave analysis (Spectral Domain Approach) on the CBCPW structure, we can discover that the leaky wave propagates along a particular angle relative to the main CPW line, causing the wave to propagate as if in a parallel plate waveguide (PPW). Therefore, we can etch rectangular slots along the ground planes with the angle we have acquired. If the length of the slot is significantly longer than the width and approximately equals to half the guided wavelength, the slots fed by CBCPW will radiate power efficiently .We can thus obtain a centralized broadside radiation pattern and a dual-polarization antenna.
16
SRIVASTAVA, KISLAY. "DESIGN AND ANALYSIS OF DUAL SHAPE CORE LARGE-MODE-AREA LEAKY CHANNEL WAVEGUIDE FOR HIGH POWER". Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/14454.
Pełny tekst źródłaStreszczenie:
We propose a leaky channel waveguide for large-mode-area extended single-mode operation.
The proposed structure is characterized by specially designed guiding core and multilayer
cladding. Specially designed cladding enables all the supported modes except fundamental
modes leaky. Leakage loss of the higher-order mode which is key factor of single-mode
operation is calculated by solving the profile by effective index method in conjunction with
transfer matrix method. Dispersive cladding of the proposed design makes this design enable to
show extended single mode operation in the entire wavelength range beyond 900 nm with a
mode area as large as 100μm2. Such a large confinement area for mode propagation can
effectively suppress non linear optical effects. The waveguide is expected to find application in
the design of high power lasers and amplifiers.
17
SINGH, SANDEEP. "DESIGN AND ANALYSIS OF TRENCH ASSISTED LARGE MODE AREA LEAKY CHANNEL WAVEGUIDE FOR HIGH-POWER APPLICATIONS". Thesis, 2013. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15673.
Pełny tekst źródłaStreszczenie:
Integrated-optic waveguide lasers have drawn considerable attention for their
compactness and possibility of device integration. A lot of interest has been shown to
increase the mode area of waveguide for applications in optical communication and
high-power laser and amplifier. For waveguide laser and amplifier applications, it is
preferable to use a waveguide that supports only one mode to avoid instability arising
from intermodal dispersion and mode competition. A conventional single-mode
waveguide has a small guiding core. The tight light confinement in such a waveguide
can reduce the optical damage threshold of the waveguide and at the same time, give
rise to significant nonlinear optical effects, which limit ultimately the power handling
capability of the waveguide.
A preferred structure for high-power applications should be one that has a large core
and yet supports only a single mode. Here a novel cladding design in which the
refractive index is uniform but the geometry is so designed that all the modes are leaky.
Such a geometrically shaped cladding is highly dispersive and can also lead to singlemode
operation over an extended range of wavelengths. Using properly chosen
parameters, the waveguide can exhibit single-mode operation in the wavelength range
900–1600nm with a large core area.
18
KHAN, MOHD IRFAN. "EFFECTS OF LEAKY WAVEGUIDE ON THE CONTROL PERFORMANCE OF COMMUNICATION BASED TRAIN CONTROL SYSTEM BASED ON PATH-LOSS MODEL". Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/14996.
Pełny tekst źródłaStreszczenie:
In urban rail transit, systems using communication based train control
(CBTC), it uses high accuracy of train locating, realizes a continuous automatic train
control system. High resolution of locating the train permits the high line capacity
and fewer Infrastructures is required than Track circuit based system therefore all
over the world countries have more concerned about this technology. DCS system
plays an important role in the information interaction between ground equipment and
vehicle equipment in CBTC. DCS is WLAN which is short range radio networks
based on IEEE 802.11, complete communication network is built with many closely
deployed AP (Access Point). IEEE 802.11b is a physical layer amendment for
operation in the 2.4 GHz band, adopted in CBTC system in which data transmits at
11Mbps and uses DSSS modulation. Data communications systems based in the 2.4
GHz ISM band has raised the concern of RF interference between CBTC equipped
trains and the variety of new and existing users of this band. The reliability and safety
of information transmission can be improved when leaky waveguide is used as
transmission medium of train-ground wireless communication in CBTC
(Communication Based Train Control), also it can provide better performance and
stronger anti-interference ability than free space. These benefits of leaky waveguide
insisting the research scholar of communication field to intervene in CBTC system.
Wireless LAN technologies are adopted in most train wayside
communication systems in CBTC. Successful handoff plays an indispensable role in
wireless communications. Running through the large wireless networks with
numerous APs in urban mass transit, a train equipped with CBTC systems inevitably
encounters the problems of handoff. Against the possibly negative phenomena such
as Ping-Pong effect, handoff delay, packet loss and so on. Frequency Combination
and Location based Handover scheme are analysed, both handover scheme are also
correlated with Leaky waveguide based CBTC system. After analysis, it is realized
that Location Based Handover Scheme is best suited for Leaky waveguide based
CBTC system in many aspects. Leaky waveguide also limits the implementation of
various handover schemes.
19
Hsiao, Cherng Chyi, i 蕭承麒. "A Beam Adjustable Leaky-Wave Antenna Using a Moveable Dielectric Slab inside a Waveguide－Theoretical Analysis and Experimental Studies". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/55706359367069234447.
Pełny tekst źródłaStreszczenie:
博士國立交通大學
電信工程系所
93
In this dissertation, we presented a beam adjustable antenna made up of a slitted waveguide and a dielectric slab. In order to steer the radiation main-beam angle, we changed the phase constant of the waveguide mode by inserting a dielectric slab to perturb its field distribution. The direction of radiation main-beam can be steered by dynamically changing the position of the dielectric slab. In the theoretical analysis, the dispersion relation including the phase and attenuation constants, were determined by solving the transverse resonance equation. An agreement between the theoretical and experimental radiation pattern verifies the beam-steering mechanism. Up to 23o beam-steering angle can be achieved using this approach.
20
Lu, Jeng-Hau, i 呂政皓. "Techniques for Side Lobe Suppression and Gain Enhancement of a Half Mode Substrate Integrated Waveguide Leaky-Wave Antenna ANTENNA". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/53864171228319744956.
Pełny tekst źródłaStreszczenie:
碩士國立交通大學
電信工程研究所
99
This thesis gives a study on two techniques to suppress the side lobes and enhance the gain of a half mode substrate integrated waveguide leak wave antenna, respectively. In this thesis, we are aware of two phenomenon that may spoil the performance of a leaky wave antenna: 1. Due to the traveling wave nature of the leaky wave antennas, the remaining power at the end of the leaky wave antenna should always be carefully guided and terminated or the reflected wave will be excited with the corresponding back lobes that may spoil the radiation pattern. 2. Even if one can guide the wave in the leaky wave antenna to avoid reflections, an ideal leaky wave line source may still introduce side lobes due to the effect of the finite uniform illumination of the aperture antennas. We would here give a study on two methods accompanied with a proposed transition dedicated for a half mode substrate integrate waveguide leaky wave antenna to handle the problems mentioned above. First, a transition to efficiently convert the input power to construct the leaky mode of the leaky wave antenna is proposed to enhance the efficiency of the leaky wave antenna and avoid possible reflections at the terminal of the leaky wave antenna. This transition can be considered as a stepping stone to facilitate the later analysis and design of the leaky wave antenna. Secondly, a cosine-shaped tapering profile is proposed to taper the waveguide width of the half mode substrate integrated waveguide. Since one can thus shape the aperture field of the leaky wave antenna to satisfy the Taylor’s rules, the side lobes of the radiation pattern can having a better chance to be suppressed. Finally, a feed-back network is proposed to guide the non-radiated power back to the feed of the leaky wave antenna. The gain is expected to be enhanced with the aid of the non-radiated power. These two methods accompanied with the proposed transition can improve the performance of the leaky wave antenna at an arbitrary frequency range easily and thus has great potential in many applications.
21
Chuang, Shih-Keng, i 莊士賡. "Design of Dual Band CRLH Substrate Integrated Waveguide Leaky Wave Antenna And The Performance Verification of Embedded End-Fire Antennas in LTCC for 60GHz". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/41083194434655692903.
Pełny tekst źródłaStreszczenie:
碩士國立臺灣大學
電信工程學研究所
102
This thesis is divided into two parts, the first part is a design of CRLH dual band leaky wave antenna by substrate integrated waveguide (SIW). Energy is radiated from the top slots of the SIW. By adding transmission line differs from SIW structure on both sides of SIW, the dual band design can be more flexible and the size of antenna can be reduced. VIAs are added near the slot for adjusting the operating frequency. Dual slots on the top of SIW for enhancing the gain of antenna is also proposed in this thesis. Design theory, antenna structure, simulation and measurement verification of these three antennas, are discussed in the second and the third chapter in the thesis. The second part is the verification of embedded end-fire antenna in LTCC for V-band. Two different type of antenna, monopole and slot, are proposed. Considering the variation in the manufacturing process, the impact of different design parameters on the reflection coefficient and the isolation are analyzed. The comparison of simulation and measurement result are discussed in the fourth and fifth chapter.
22
Sheng, Meng-Huei, i 盛夢徽. "Rigorous Leaky-Mode Analysis of Antiresonant Reflecting Optical Waveguides". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/84110131372336570151.
Pełny tekst źródłaStreszczenie:
博士國立中山大學
光電工程研究所
93
We have developed a rigorous leaky-mode analysis on the antiresonant reflecting optical waveguides (ARROW’s) using a so-called “coupled electric (CE) coupled magnetic (CH) field method.” Radiation loss characteristics and the field distribution of the ARROW are analyzed in detail. Meanwhile, both the refractive indices and the thickness dependence for the isolation and distinction of modes are also investigated in this thesis. From the CE–CH method, the associated complex symmetric tridiagonal matrices are derived to solve the modal solutions via the eigenvalue-eigenvector technique. The uniquely designed formulation of CE–CH method yields better numerical properties, specifically in calculating the field distribution. This is suitable for any combination of materials and is capable of handling complex problems such as the leaky characteristics for both lossless and lossy cases. To quickly solve the complex roots of the ARROW, a set of accurate closed-form approximations for estimating both the field distribution and complex propagating constant have been derived from the CE–CH matrices. These first-order approximations provide six significant figures of the real part of the propagation constant
23
Chuang, Ying-Chieh. "Full-Vectorial Finite Difference Mode Solver for Leaky Optical Waveguides". 2004. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2307200414220900.
Pełny tekst źródła
24
Chuang, Ying-Chieh, i 莊英傑. "Full-Vectorial Finite Difference Mode Solver for Leaky Optical Waveguides". Thesis, 2004. http://ndltd.ncl.edu.tw/handle/71427437027268826890.
Pełny tekst źródłaStreszczenie:
碩士國立臺灣大學
電信工程學研究所
92
Abstract Due to its simplicity and efficiency, a full-vectorial mode solver based on a finite difference scheme is applied to investigate the propagation characteristics of optical waveguides. Since uniform meshes are used in the numerical implementation, it is very easy to divide the computational window of any arbitrary cross-sectional geometries of the waveguides. An index averaging technique is employed to deal with curved dielectric interfaces for stabilizing the numerical calculation and accelerating convergence. In addition, for solving leaky-mode problems, such as the investigation of waveguide confinement loss, the perfectly matched layer (PML) absorbing boundary condition is incorporated into our finite difference formulations. The influence of the index averaging technique on the leaky-mode analysis is also discussed. We employ the shift inverse power method (SIPM) for solving the formulated eigenvalue problems. In this work, both one-dimensional and two-dimensional problems are considered, including the slab waveguide, the antiresonant reflecting optical waveguide (ARROW), the step-index optical fiber, the rectangular channel waveguide, the anisotropic embedded-channel LiNbO3 integrated optical waveguide, and microstructured optical fibers (MOFs). Comparsion of our calculation with other methods is discussed.
25
Liu, Jun Yeh, i 劉潤業. "Effect of Finite Metalization Thickness on Leaky Waves of Coplanar Waveguides". Thesis, 1994. http://ndltd.ncl.edu.tw/handle/50518941931628968636.
Pełny tekst źródłaStreszczenie:
碩士國立中山大學
電機工程研究所
82
In this study, the effects of finite metalization thickness on dispersion characteristics and leaky waves of coplanar waveguides are presented and discussed in detail. We first derive the spectral domain integral equations by using network analytical method, an extension of spectral domain approach, to take metalization thickness into account. By applying the Galerkin's procedure to these integral equations, we can solve the complex propagation constant of this coplanar waveguide structure. Thus, the transmission characteristics of the coplanar waveguide can be obtained, i.e., effective dielectric constants and normalized attenuation constants. Numerical results show that the normalized attenuation constant varies significantly with the dielectric substrate thickness. Changing the center strip width or the slot width has similar influence on the normalized attenuation constant. The normalized attenuation constant is found to increase with increasing metalization thickness.
26
Lin, Yi-Zhen, i 林宜貞. "A new method of analyzing the light transmission in leaky and absorbing waveguides". Thesis, 1997. http://ndltd.ncl.edu.tw/handle/84721150681189187295.
Pełny tekst źródłaStreszczenie:
碩士國立清華大學
電機工程學系
85
A simple, generalized method of analyzing the light transmission in leaky and absorbing planar waveguides is proposed in this thesis. We use a straightforward and intuitive manner to derive the analytical expression of the power transmission discussed. By utilizing the well-known law for the partial reflection of a plane wave at an interface and the Goos-Hanchen shift happened for the case of total internal reflection, the associated power transmission of the above structure is derived. Advantages of the present method are simple and applicable to multilayer structures with ease. For comparisons, the existing formula for this waveguiding structures is overviewed, and numerical calculations are compared well with our and the other method. An extension of this approach is applied to a medium-clad side-polished single-mode fiber. Calculations based on our simplified method and an expression derived from the sophisticated coupled-mode theory are also made. Our results can explain the behaviors of the light transmission in the above structure. It is still far from satisfaction because some assumptions are made too rough, however. Further works in this subject are needed. In summary, this thesis introduces a simple and interesting approach to analyze the light transmission in leaky and absorbing planar and fiber-optic waveguides. The previous subject is important in designing and analyzing optical waveguide components.
27
BACCARELLI, Paolo. "Studio di fenomeni propagativi e radiativi in guide anisotrope e periodiche stampate". Doctoral thesis, 2000. http://hdl.handle.net/11573/394517.
Pełny tekst źródła