Zaloguj się

Gotowe bibliografie tematyczne / Laser processing / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Laser processing.

Artykuły w czasopismach na temat „Laser processing”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 12 października 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Laser processing”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

KOBAYASHI, Naoto, Takashi UEDA, Tatsuaki FURUMOTO, Akira HOSOKAWA i Ryutaro TANAKA. "E23 Laser Sintering Characteristics of Metallic Powder with Yb Fiber Laser : Optimization of Processing Conditions about Laser irradiation(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 593–96. http://dx.doi.org/10.1299/jsmelem.2009.5.593.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

IKEDA, Masayuki. "Precision Processing by Laser. Laser Material Processing." Journal of the Japan Society for Precision Engineering 65, nr 11 (1999): 1539–42. http://dx.doi.org/10.2493/jjspe.65.1539.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

OGITA, Taira, Toru MURAI i Masaru KANAOKA. "High-quality Laser Welding of Stainless Steels(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.1 (2005): 279–84. http://dx.doi.org/10.1299/jsmelem.2005.1.279.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

TOYODA, KOICHI. "Laser processing." Review of Laser Engineering 21, nr 1 (1993): 185–87. http://dx.doi.org/10.2184/lsj.21.185.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Zhan, Xuepeng, Huailiang Xu i Hongbo Sun. "Femtosecond laser processing of microcavity lasers". Frontiers of Optoelectronics 9, nr 3 (wrzesień 2016): 420–27. http://dx.doi.org/10.1007/s12200-016-0581-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Chen, Ying-Tung, Yunn-shiuan Liao i Ta-Tung Chen. "Fabrication of arrayed microneedles by laser LIGA process(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.1 (2005): 285–90. http://dx.doi.org/10.1299/jsmelem.2005.1.285.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

TOYODA, Koichi. "Laser Materials Processing". Review of Laser Engineering 24, Supplement (1996): P1—P4. http://dx.doi.org/10.2184/lsj.24.supplement_p1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

YONEDA, Masafumi, i Munehide KATSUMURA. "Laser hybrid processing." Journal of the Japan Welding Society 58, nr 6 (1989): 427–34. http://dx.doi.org/10.2207/qjjws1943.58.427.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

TOYODA, Koichi. "Laser Photochemical Processing". Review of Laser Engineering 38, nr 1 (2010): 39–42. http://dx.doi.org/10.2184/lsj.38.39.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Roessler, David M. "Laser Materials Processing". Optical Engineering 36, nr 12 (1.12.1997): 3481. http://dx.doi.org/10.1117/1.601561.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Dutta Majumdar, J., i I. Manna. "Laser material processing". International Materials Reviews 56, nr 5-6 (listopad 2011): 341–88. http://dx.doi.org/10.1179/1743280411y.0000000003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Spalding, I. J. "Laser materials processing". Optics & Laser Technology 17, nr 5 (październik 1985): 275. http://dx.doi.org/10.1016/0030-3992(85)90048-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Tam, S. C. "Laser material processing". Journal of Materials Processing Technology 39, nr 1-2 (październik 1993): 229. http://dx.doi.org/10.1016/0924-0136(93)90021-w.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Ireland, Clive. "Laser materials processing". Optics & Laser Technology 24, nr 4 (sierpień 1992): 239–40. http://dx.doi.org/10.1016/0030-3992(92)90031-v.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

MIYAMOTO, Isamu. "Laser materials processing". Journal of the Japan Society for Precision Engineering 75, nr 1 (2009): 66–67. http://dx.doi.org/10.2493/jjspe.75.66.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Nakazawa, Hiromu. "LASER RHEOLOGY PROCESSING". Advanced Manufacturing Processes 1, nr 2 (styczeń 1986): 323–39. http://dx.doi.org/10.1080/10426918608953167.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Goswami, G. L., i Dilip Kumar. "Laser materials processing". Bulletin of Materials Science 11, nr 2-3 (listopad 1988): 213–24. http://dx.doi.org/10.1007/bf02744555.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Gillner, Arnold. "Laser Micro Processing". Laser Technik Journal 5, nr 1 (styczeń 2008): 27–30. http://dx.doi.org/10.1002/latj.200790202.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

OKAMOTO, Y., N. KATAOKA, Y. UNO, I. TANINO i S. NAKASHIBA. "Machining Characteristics of Aluminum Nitride by Harmonics of Nd:YAG Laser(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.1 (2005): 269–72. http://dx.doi.org/10.1299/jsmelem.2005.1.269.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

WATANABE, Takehiro. "Precision Processing by Laser. Foreign Research Trend in Laser Material Processing." Journal of the Japan Society for Precision Engineering 65, nr 11 (1999): 1574–78. http://dx.doi.org/10.2493/jjspe.65.1574.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Li, Shuang Mei. "Research of Laser Shock Processing". Applied Mechanics and Materials 182-183 (czerwiec 2012): 343–47. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.343.

Pełny tekst źródła

Streszczenie:

This paper analyzes the actual requirements for the laser in laser shock processing. A laser used in laser shock processing for special experiment is designed and main performance of the laser has been tested.

Style APA, Harvard, Vancouver, ISO itp.

22

Novikov, Dmitri. "Advances in Laser Processing". AM&P Technical Articles 181, nr 6 (1.09.2023): 25–28. http://dx.doi.org/10.31399/asm.amp.2023-06.p025.

Pełny tekst źródła

Streszczenie:

Abstract This guide outlines recent advances in the various methods of laser technology and appropriate manufacturing applications. Each process has unique requirements and matching the laser source to the project is essential for developing a robust solution.

Style APA, Harvard, Vancouver, ISO itp.

23

WASHIO, Kunihiko. "Precision Processing by Laser. Precision Micro-Processing by All-Solid-State Lasers." Journal of the Japan Society for Precision Engineering 65, nr 11 (1999): 1566–69. http://dx.doi.org/10.2493/jjspe.65.1566.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Arnold, Craig B., i Alberto Piqué. "Laser Direct-Write Processing". MRS Bulletin 32, nr 1 (styczeń 2007): 9–15. http://dx.doi.org/10.1557/mrs2007.9.

Pełny tekst źródła

Streszczenie:

AbstractDirect-write techniques enable computer-controlled two- and three-dimensional pattern formation in a serial fashion. Among these techniques, the versatility offered by laser-based direct-write methods is unique, given their ability to add, remove, and modify different types of materials without physical contact between a tool or nozzle and the material of interest. Laser pulses used to generate the patterns can be manipulated to control the composition, structure, and even properties of individual three-dimensional volumes of materials across length scales spanning six orders of magnitude, from nanometers to millimeters. Such resolution, combined with the ability to process complex or delicate material systems, enables laser direct-write tools to fabricate structures that are not possible to generate using other serial or parallel fabrication techniques. The goal of the articles in this issue of MRS Bulletin is to illustrate the range of materials processing capabilities, fundamental research opportunities, and commercially viable applications that can be achieved using recently developed laser direct-write techniques. We hope that the articles provide the reader with a fresh perspective on the challenges and opportunities that these powerful techniques offer for the fabrication of novel devices and structures.

Style APA, Harvard, Vancouver, ISO itp.

25

Hou, Zhi-Shan, Qiu-Lan Huang, Xue-Peng Zhan, Ai-Wu Li i Huai-Liang Xu. "Real 3D microsphere lasers by femtosecond laser processing". RSC Advances 7, nr 27 (2017): 16531–34. http://dx.doi.org/10.1039/c6ra28840e.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Shizhou Xiao, Shizhou Xiao, i Andreas Ostendorf Andreas Ostendorf*. "Laser Processing in Solar Cell Production(Invited Paper)". Chinese Journal of Lasers 36, nr 12 (2009): 3116–24. http://dx.doi.org/10.3788/cjl20093612.3116.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

LAL, BAJRANG, i PANKAJ JAIN. "LASER IN CERAMICS PROCESSING". International Journal of Modern Physics: Conference Series 22 (styczeń 2013): 701–7. http://dx.doi.org/10.1142/s201019451301088x.

Pełny tekst źródła

Streszczenie:

LASER, an acronym for Light Amplification by Stimulated Emission of Radiation have unique properties, Which make it differ from ordinary light such as it is highly coherent, monochromatic, negligible divergence and scattering loss and a intense beam of electromagnetic radiation or light. It also occur in a wide range of wavelength/frequency (from Ultraviolet to Infrared), energy/power and beam-mode/configurations ; Due to these unique properties, it have use in wide application of ceramic processing for industrial manufacturing, fabrication of electronic circuit such as marking, serializing, engraving, cutting, micro-structuring because laser only produces localized heating, without any contact and thermal stress on the any part during processing. So there is no risk of fracturing that occurs during mechanical sawing and also reduce Cost of processing. The discussion in this paper highlight the application of laser in ceramics processing.

Style APA, Harvard, Vancouver, ISO itp.

28

FUJIWARA, Junji. "Laser Processing System Using Direct Diode Laser". JOURNAL OF THE JAPAN WELDING SOCIETY 89, nr 1 (2020): 63–69. http://dx.doi.org/10.2207/jjws.89.63.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Klug, Ulrich, i Frank Siegel. "Laser Micro Processing using short Laser Pulses". Laser Technik Journal 4, nr 1 (styczeń 2007): 32–35. http://dx.doi.org/10.1002/latj.200790140.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

KAWASUMI, Hiromichi. "Laser processing of materials." Jitsumu Hyomen Gijutsu 32, nr 4 (1985): 149–59. http://dx.doi.org/10.4139/sfj1970.32.149.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

KATAYAMA, Seiji. "Progress in Laser Processing". Journal of Smart Processing 1, nr 1 (2012): 8–19. http://dx.doi.org/10.7791/jspmee.1.8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

MIZOBE, Hirofumi, i Tsuyoshi NAKAMURA. "Intelligence in Laser Processing". Journal of Smart Processing 6, nr 2 (2017): 52–56. http://dx.doi.org/10.7791/jspmee.6.52.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

KITAGAWA, Akikazu. "Laser processing of ceramics." Journal of the Surface Finishing Society of Japan 40, nr 8 (1989): 885–88. http://dx.doi.org/10.4139/sfj.40.885.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

NAGAI, Haruhiko. "Laser processing 30 years." Review of Laser Engineering 19, nr 1 (1991): 38–39. http://dx.doi.org/10.2184/lsj.19.38.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

DAIDO, Hiroyuki. "Laser Processing Technology (1)". Journal of the Institute of Electrical Engineers of Japan 136, nr 7 (2016): 422–25. http://dx.doi.org/10.1541/ieejjournal.136.422.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

MIKAME, Kazuhisa, i Hiroyuki NIINO. "Laser Processing Technology (2)". Journal of the Institute of Electrical Engineers of Japan 136, nr 7 (2016): 426–29. http://dx.doi.org/10.1541/ieejjournal.136.426.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Steen, W. M. "Laser processing in manufacturing". Optics & Laser Technology 26, nr 2 (kwiecień 1994): 140–41. http://dx.doi.org/10.1016/0030-3992(94)90100-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Steen, W. M. "Laser processing in manufacturing". Materials & Design 14, nr 5 (styczeń 1993): 313. http://dx.doi.org/10.1016/0261-3069(93)90148-o.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Ilyuschenko, A. Ph, V. A. Okovity, N. K. Tolochko i S. Steinhauser. "Laser processing of ZrO2coatings". Materials and Manufacturing Processes 17, nr 2 (5.01.2002): 157–67. http://dx.doi.org/10.1081/amp-120003526.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Rooks, Brian. "Laser processing of plastics". Industrial Robot: An International Journal 31, nr 4 (sierpień 2004): 338–42. http://dx.doi.org/10.1108/01439910410541837.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Zimmer, K. "Laser Processing and Chemistry". Zeitschrift für Physikalische Chemie 208, Part_1_2 (styczeń 1999): 291–92. http://dx.doi.org/10.1524/zpch.1999.208.part_1_2.291a.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Dutta Majumdar, J., i I. Manna. "Laser processing of materials". Sadhana 28, nr 3-4 (czerwiec 2003): 495–562. http://dx.doi.org/10.1007/bf02706446.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Davies, W. S. "Laser processing in manufacturing". Optics and Lasers in Engineering 18, nr 5 (styczeń 1993): 380. http://dx.doi.org/10.1016/0143-8166(93)90048-p.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Rath, Wolfram, i Corinna Brettschneider. "Industrial Laser Materials Processing". Laser Technik Journal 11, nr 4 (wrzesień 2014): 23–27. http://dx.doi.org/10.1002/latj.201400037.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Afanasieva, Оlga, Nataliia Lalazarova, Anatolіy Chygryn i Olena Popova. "Modeling laser processing of materials". Bulletin of Kharkov National Automobile and Highway University 1, nr 103 (29.12.2023): 151. http://dx.doi.org/10.30977/bul.2219-5548.2023.103.1.151.

Pełny tekst źródła

Streszczenie:

For a long time, the complexity of the phenomena occurring during the laser exposure to the material made possible the mainly experimental selection of processing modes. The analysis of the thermal processes taking place at the same time and the programs being used require in-depth knowledge of physical phenomena, as well as broad capabilities of computing equipment, so they have become inaccessible to many researchers. Goal. The purpose of the study is to model the interaction of laser radiation with substance on the example of acrylic glass using the COMSOL Multiphysics 5.5 software package. Methodology. The scrap material for research was acrylic extrusion glass according to GOST 17622-72 and GOST 10667-99. Successful laser treatment requires maximum absorption of radiation, so a CO2 laser with a wavelength of 10.6 microns was chosen for the research. Other laser processing parameters (power 10 W, focus point diameter 1 mm, pro-menu movement speed 40 mm/s) are typical for the StoLaser Standard 4030 Mini installation. Results. The main task was modelling of the interaction of laser radiation with substance on the example of acrylic glass using the COMSOL Multiphysics 5.5 software package. The paper investigates the peculiarities and nature of the interaction of laser radiation with acrylic glass using the finite element method, as well as with the help of the COMSOL software complex, which works according to this method. A program for modelling the interaction of a laser beam with a material, in this case non-metallic, was created experimentally. A graphical distribution of heat on the surface and an isotherm of the depth of heat distribution inside the material were obtained. Scientific novelty. In this paper, a model of the passage of laser radiation through a block of dielectric material was created using the COMSOL Multiphysics package. The possibility of modeling laser processing of materials by the finite element method was proven. Practicality. The developed model can be used when choosing the modes of laser processing of various materials.

Style APA, Harvard, Vancouver, ISO itp.

46

Kwok, C. T., K. I. Leong, F. T. Cheng i H. C. Man. "Enhancement in Properties of High-speed Steel by Laser Surface Treatment(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.1 (2005): 257–62. http://dx.doi.org/10.1299/jsmelem.2005.1.257.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

TAKAHASHI, Kenji, Takehiro WATANABE, Souta MATSUSAKA i Tsutomu WADA. "Direct Micro-joining of Copper Materials with YAG Laser Beams(Laser processing (continued))". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.2 (2005): 799–804. http://dx.doi.org/10.1299/jsmelem.2005.2.799.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

SUZUKI, Ryo, Jiang ZHU, Tomohisa TANAKA i Yoshio SAITO. "E20 Excimer Laser 3D Machining Based on Irradiation Pulse Number Control(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 581–84. http://dx.doi.org/10.1299/jsmelem.2009.5.581.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

OGAWA, Keiji, Heisaburo NAKAGAWA i Satoshi WATANABE. "E25 Run-out Correction Technology Using Laser On-the-Machine Tool(Laser processing)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 603–8. http://dx.doi.org/10.1299/jsmelem.2009.5.603.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

LIU, Zhongjie, i Muneharu KUTSUNA. "Parametric Study on Laser-Arc Hybrid Welding of High Strength Steels Using CO_2 Laser(Laser processing (continued))". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.2 (2005): 793–98. http://dx.doi.org/10.1299/jsmelem.2005.2.793.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!