Gotowa bibliografia na temat „Italian Chairs”

Abstract<title> SUMMARY </title>We have gathered here twenty-six writings from the correspondence of Giuseppe Peano, as well as letters by Alexander Macfarlane and Alexander Ziwet.Peano's letters were addressed to Ernesto Cesaro, an important member of the great Italian school of mathematics founded in the second half of the Nineteenth century. In these writings, Peano discusses various topics: Infinitesimal calculus and Barycentric calculus, the «Rivista di Matematica» and the «Formulario» of which he was editor; didactics and a question about Actuarial mathematics. Some of the writings are confidential in nature: in one letter, Peano proposes exchanging his professorial chair with Cesaro's, and hence transferring from Turin to Naples.The letters written by Macfarlane and Ziwet were sent to Peano; they contain, at the request of Cesaro, information concerning university chairs and the cost of living in the United States.

Italian Historical Opera Houses are private or public spaces built around a cavea, with tiers of boxes on the surrounding walls. At the early age – from 16th to 18th century – boxes were private properties of the richest class, typically the financial responsible of the whole building. The stalls hosted the middle class, that gradually increased its social position and for this reason the wooden seats were progressively replaced by chairs. The gallery was reserved to lower classes. Does this social division correspond to a different acoustic comfort? The present work tries to answer this question using subjective preference models provided by scholars. With this aim, the room criteria defined by different authors and in distinct times are lined up with the ISO 3382 standards and analysed depending on the acoustic peculiarities of an Italian Historical Opera House selected as case study. Calibrated impulse responses were handled through the numerical simulations of a whole orchestra of virtual sound sources in the pit.

The present report commemorates the persecution of five renown Italian physiologists of Jewish descent that lost their chairs in medical schools because of the anti-semitic policies of the fascist regime. In 1938, Mussolini promulgated the Racial Laws, officially with the aim of safeguarding the purity of the Italian race in conquered African colonies. However, their true intent was to persecute the Italian Jewish community in agreement with the policy of Nazi Germany. In accordance with the Racial Laws, all non-Aryans were banished from professional activities and were evicted from public, social, and academic life. As a result, 98 full professors in Italian universities were removed from their academic positions. In medical schools, physiology, more than other discipline, lost the most prominent faculty members. Of the 17 full Professors of Human Physiology, five were of Jewish descent, and all were evicted: they were Camillo Artom from Palermo, Mario Camis from Bologna, Carlo Foà from Milan, Amedeo Herlitzka from Turin, and Ugo Lombroso from Genoa. All were talented and famous scientists who were forced to leave Italy and take refuge in foreign countries. At the end of World War II, Camis, Foà, Herlitzka, and Lombroso returned to Italy and resumed their previous academic positions, whereas Artom remained in the United States. Unfortunately, Camis died later that year. During the postwar period, some of the fascists responsible for the Jewish persecution were killed or committed suicide while the survivors were imprisoned and prosecuted. However, all were soon released and resumed their former positions.

Purpose The purpose of this paper is to investigate the impact of gender diversity on corporate cash holdings by scrutinizing different positions covered by female board directors. Design/methodology/approach The paper examines a sample of Italian listed companies between 2006 and 2015. Fixed-effects regressions are employed as the base empirical methodology. In addition, because the link between corporate governance variables and cash may suffer from endogeneity issues, the study employs several tests to control for this potential problem. Findings The empirical findings demonstrate that the relationship between gender diversity and cash holdings depends on the role of female directors on the boards. Specifically, the evidence shows that women in monitoring functions, ruled by independent directors and female chairs, led to a decrease in cash reserves. Conversely, companies managed by female CEOs have larger cash holdings. Research limitations/implications The paper refers to Italian listed companies only and does not analyze whether and how the financial crisis has affected the link between female directors and cash reserves. Practical implications The study provides insights for the diverse effects of female directors on cash management decision and contributes to the debate on gender diversity capabilities for improving firm financial flexibility. Originality/value This paper is the first empirical study to attempt to disentangle the effect of gender diversity on cash holdings. It sheds light on the consequences of appointing female directors on cash policies and explores the Italian context after the introduction of the gender quotas law.

This study presents the retrofit acoustic design of the Italian theatre “Cavallino Bianco”. In its historical configuration, the hall had a curved roof with a pressed-plant fiber ceiling, which was demolished and replaced with a wooden roof without a false ceiling, leading to an increase in volume and worsening of the reverberation time. This study proposes the realization of a wave ceiling and the application of sound-absorbing and reflecting panels on the walls, which have already been implemented. These modifications have affected the acoustic characterization of the theatre, as shown both through on-site measurements during the main construction phases and through numerical simulations. The reverberation time, clarity index, and speech transmission index (STI) are evaluated considering all the variations in the hall during its different construction times, and the optimal solution is identified with regard to different specific uses. The final configuration, by reducing the volume of the hall and using sound-absorbing materials, significantly reduces the reverberation time. In addition, the hall at full capacity with chairs and people shows evident improvement to the clarity index, allowing the theatre to be used for a wide range of musical genres such as instrumental, symphonic, and opera.

The European Carbohydrate Organization (ECO), under the auspices of IUPAC and the cosponsorship of the Italian Chemical Society, organized the 16th European Carbohydrate Symposium (Eurocarb-16), in Sorrento (Napoli), Italy on 3-7 July 2011, during the International Year of Chemistry.More than 700 participants representing 46 different countries participated; the scientific program covered all the chemical, biological, biophysical, and biotechnological aspects of carbohydrates; and more than 150 oral communications, 28 invited lectures, 10 plenary lectures, and 2 awarded plenary lectures, as well as 400 poster contributions were presented.Following the tradition of the previous meetings, the Emil-Fischer Carbohydrate Award and the Carbohydrate Research Award were presented during the opening ceremony.The papers published in this issue of Pure and Applied Chemistry (PAC) give a good cross-section of the topics covered at Eurocarb-16, including: synthetic procedures developed on multifunctional molecules such as carbohydrates; design and synthesis of bioactive carbohydrates of pharmaceutical interest; structural studies on very complex carbohydrate molecules and their dynamic interactions; carbo hydrate-based tools for biological applications such as PNA-sugar conjugates; and carbohydratebased synthetic ion transporters and glyco-nanoparticles. These are just some examples of the contributions presented.We are grateful to the contributors, who permit the readers to have an idea of how carbohydrate chemistry can concur with the development of chemistry in different and multidisciplinary areas, with relevant applications of social interest. Eurocarb-17 will take place in Tel Aviv 7-11 July 2013.Rosa Lanzetta and Francesco NicotraConference Co-chairs and Editors

In the autumn of 2019, the organizers of the 2020 Padua Muscle Days planned an intense program, which was to be held from March 18 to March 21, 2020. The program included eight Scientific Sessions to occur over three full days at either Padova University or the Hotel Augustus on Euganei Hills (Padova), Italy. Abruptly, however, in early January the Coronavirus COVID-19 outbreak started in China and changed the world perspectives and expectations. In Italy, it started in Lombardy and Veneto, two main industrial areas of the country with intense connections and interchanges of people and commercial activities with China. Indeed, the virus was first isolated from a couple of Chinese tourists, who inadvertently incubated the infection during their visit to many towns in Italy. Within the following two weeks, the epidemic had the first Italian cases and victims in an area south of Milan and in a Village of the Euganei Hills (Vo Euganeo, Padova). The village was immediately quarantined, but it was too late. The virus had escaped the area. Thus, it was a mandatory, though difficult decision (made even before the Italian National Government posted rules to be followed to decrease spread of the infection), to post-pone the Padua Muscle Days meeting from 18-21 March, 2020 to 25-28 November, 2020. Luckily, the vast majority of organizers, chairs, speakers, and attendees accepted the decision and have assured their presence in late November, despite the coincidence with the Thanksgiving holiday in the US. Currently, the only changes in the program are the new dates; however, it is difficult to forecast the future. Anyhow, the rationale of the decision to post-pone 2020PMD was reinforced by the actions of many organizers of international events. One of the most recent examples is the March 6, 2020 decision of the leaders of the Experimental Biology Host Societies to cancel Experimental Biology (EB) 2020, set to take place April 4–7 in San Diego, California, USA. All these active civil responses to world dangers are mandatory to avoid those military responses that are easy to start, but provide the worst results. How do we not lose half of the 2020 year? The option is to try to achieve some of the goals of the meeting by long-distance communications. Thus, the Collection of Abstracts will be, as originally planned, e-published in this 30(1) 2020 Issue of the European Journal of Translational Myology (EJTM) together with the many EJTM Communications submitted by speakers and attendees of the 2020PMD. We may also start the process that will implement EMMA, the European Mobility Medicine Association, by circulating a proposal and inviting comments.

The current paper analyzes the reasons behind the difficulties of the Italian olive oil industry to compete in the world markets. The analysis highlights that these complexities can be related with two core factors: stagnant demand in the main producer/consumer countries and strong competition arising from the Spanish olive oil industry increasingly involved also in processing and trade. In addition, these weakness factors are boosted by the market power exerted by large retail chains that are now the main channel in which olive oil is retailed in the domestic market. &nbsp;

We publish here, in slightly altered versions, three lectures given by Pierluigi Petrobelli in Autumn 1988 as Chair of Italian Culture at the University of California, Berkeley. The terms of the Chair, established in 1928, state that the person entrusted with the post should ‘lecture in illustration and interpretation of Italian culture’.

The goal of my thesis is to analyse how the food&wine Italian firms can use and take advantage of their local quality and knowledge in the global value chains. In particular, I will study the different ways in which these companies can develop a process of internationalization. I will illustrate how quality of food&wine Italian products could change with the internationalization of the totality or a part of the production processes, and which could be the advantages or the problems of such strategy. In order to bring material examples and to make up a base for my analysis I will expose a few case studies of food&wine Italian firms that have carried out a process of internationalization, highlighting the need of making distinctions depending on the case. In fact, different products have got different features, therefore my aim is not to give a general and universal model, but rather to study the different strategic solutions that firms have put into practice. In particular I will study the following cases: _Rigoni di Asiago _Masi Agricola _Casa Vinicola Zonin _Brazzale

La Toscane conserve un groupe de quatre chaires historiées, réalisées entre 1260 et 1310 par Nicola et Giovanni Pisano, chaires uniquement reconnues comme des chefs d'oeuvres de la sculpture "gothique" italienne. Victimes par le passé de démembrements, puis de restaurations hasardeuses, ces chaires n'ont pas encore livré toutes les subtilités de leurs programmes iconographiques. C'est au niveau de la logique qui régit l'ordonnancement des parties figurées sur la structure architectonique qu'il s'agit de s'interroger afin de retrouver toute l'ampleur du discours théologique global. L'analyse débute sur un rappel des principes liturgiques sur lesquels se fonde la conceptionet l'utilisation médiévale de la chaire, puis effectue un tour d'horizon de diverses solutions formelles mises en oeuvre sur une aire temporelle et géographique plus ample afin de dégager des termes de comparaison utiles à une plus juste appréciation de la spécificité du travail des Pisani. .
Tuscany keeps a group of four pulpits, sculpted between 1260-1310 by Nicola and Giovanni Pisano, which are known as the greatest Italian gothic sculpture masterpieces. Those monuments have been dismembered and the subsequent restaurations have lost part of the original meaning, as the order of the figures has been forgotten. The present study tries to look for the logic that ties all figures within a coherent and unificated signification. It begins with a recall of the liturgical principles on which the pulpit is built, as the monuments exist as an active part of the christian ritual before they're considered as works of art. The analysis of the production of pulpits on a larger geographical and historical scale is also useful to observe with a better accuracy the originality of the Pisani's work. .

The central topic of this work is the analysis of the incremental use of GVCs in Italian Companies; the factors and events that keep on leading more and more companies locating the different stages of the production process across different countries. The strenghts and weaknesses, the opportunities and threats will then be made clearer by taking into consideration the standing out case of Luxottica Group, one of the wordlwide leaders of the Eyewear sector.

En italie meridionale, a l'epoque romane, l'ambon est un meuble d'une valeur insigne. On l'utilise pour la benediction du cierge le soir du samedi saint. C'est aussi le lieu de la parole et l'un des pole les plus importants de la celebration eucharistique apres l'autel. Il recut donc dans les regions des abruzzes et de la campanie un decor qui souligne son importance liturgique et exalte la hautespiritualite de sa fonction. L'examen des techniques et du style des sculptures de ces ambons - d'une qualite artistique remarquable - nous a permis d'apporter des precisiions sur l'evolution de la sculpture dans ces regions. Grace a l'etude du repertoire iconographique, riche et original, nous avons pu mieux comprendre l'importance que les clercs accorderent a la proclamation de l'evangile au sein du dispositif cultuel.

The study investigates how small and medium sized companies can integrate themselves in the manufacturing chain of Global Players in the automotive industry using a qualitative approach (interviews) and a value chain perspective

Orientador: Luiz César Marques Filho
Acompanha volume das figuras
Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Filosofia e Ciências Humanas
Made available in DSpace on 2018-08-19T01:20:08Z (GMT). No. of bitstreams: 1 Gomes_Waldemar_D.pdf: 14480882 bytes, checksum: c4ca4dbc7e0d446d6cc4b910a9597a3e (MD5) Previous issue date: 2011
Resumo: O sepulcro do Papa Júlio II foi finalizado por Michelangelo em 1545 em San Pietro in Vincoli, em Roma. O projeto final contou com 7 esculturas: 4 do artista e 3 de seus discípulos. Alguns estudiosos têm considerado que ele reuniu esculturas feitas em diversos momentos para se ver livre de uma encomenda que durou 40 anos. As recentes abordagens do significado das esculturas da Vida Ativa e da Vida Contemplativa apontam para a existência de um programa iconográfico definido. Antonio Forcellino afirma que Michelangelo se inspirou no conteúdo do livro Il Beneficio di Cristo para idealizar essas esculturas. Enrico Guidoni diz que o mestre se baseou nas iniciais de Vittoria Colonna e Faustina Mancini para concebê-las. Para Marina Gandini as duas alegorias femininas representam as formas de vida de Moisés, enquanto Maria Forcellino entende que Michelangelo teria tomado Maria Madalena e Santa Caterina como modelo ao criá-las. Quando elaborou essas esculturas, Michelangelo mantinha estreitos laços de amizade com alguns integrantes do movimento reformador italiano e comungava dos mesmos preceitos doutrinários das correntes religiosas dos valdesiani e dos "spirituali" do Circolo di Viterbo. Ao introduzir aquelas duas alegorias no monumento, o artista teria perenizado naqueles mármores a relação entre fé e obras - simbolização daquelas duas formas de vida no mundo cristão -, no tocante à justificação, tal qual essa questão era vista por aqueles reformadores, ou seja, de que apenas a fé detinha o mérito de justificar o pecador diante de Deus, sendo essa fé operadora das boas obras. Ao concebê-las o mestre não teria se baseado em qualquer escrito específico e sim em suas próprias reflexões e conversas mantidas com os interlocutores daquelas correntes sobre a questão da justificação
Abstract: The sepulcher of the pope Jules II was finished by Michelangelo in 1545 at the Church of Saint Peter in Chains, in Rome. The final project counted on 7 sculptures: 4 of them by Michelangelo?s own hands and 3 sculptures made by his assistents. Some Scholars have considered that him assembled sculptures made in different moments of his life to be free of an order that lasted 40 years. The recent approaches on the meaning of the sculptures of Activ Life and Contemplative Life point to the existence of an iconographic programme previously defined by the master. Antonio Forcellino says Michelangelo was inspired by the content of the little book Il Beneficio di Cristo to idealize these sculptures. Enrico Guidoni tells that the master had based on the first letters of the Vittoria Colonna and Faustina Mancini?s names to creat them. To Marina Gandini these sculptures are the two forms of the lives of Moses and for Maria Forcellino Michelangelo took Mary Magdalene and Saint Catherine as models to make them. When he worked on these sculptures Michelangelo had narrow ties of friendship with some persons of the italian reformed movement and communicated some doctrinaire ideals of the religious corrents of the valdesiani and the "spirituali" of the Circle of Viterbo. By introducing that two alegories in that sepulchral monument the artist has immortalized on that marbles the relationship between faith and good works - symbolizations of that two forms of life in the Cristian world -, concerning the justification question, like this question was seen by those reformers, that is to say, that only the faith had the merit to justify the sinner before God, being the good works operated by the faith. In creating them the master did not base in any specific written, but in both his own reflections and the talks he had with the interlocuters of those religious groups on the justification question
Doutorado
Historia da Arte
Doutor em História

La produzione agricola industriale su larga scala e il commercio di prodotti sono sempre più connessi a fenomeni di deforestazione e degradazione delle foreste tropicali. Tale fenomeno è descritto tramite il concetto di ‘rischio di deforestazione’ o forest-risk. I prodotti agricoli i cui processi produttivi implicano deforestazione e rimozione della vegetazione autoctona, sono classificati beni a rischio deforestazione (forest risk commodities). Carne bovina, soia, olio di palma e legname – i beni a rischio deforestazione – sono considerati ‘i grandi 4’ tra le forest-risk commodities. A causa della complessità dei sistemi globali di produzione e commercio alcuni beni sono indirettamente legati a tale rischio, poiché derivano da aree deforestate senza essere essi stessi causa diretta di deforestazione. Questa dimensione del rischio viene spesso tralasciata e permane un tema secondario nel dibattito sulla deforestazione derivata dalla produzione e il commercio di beni di consumo. La distinzione tra beni con un legame causale diretto con la deforestazione e beni che includono nella propria filiera il rischio di deforestazione incide su come la responsabilità della deforestazione viene attribuita e considerata sia tramite misure legali che tramite standard volontari di auto-regolamentazione. Pertanto risulta necessario sviluppare una concettualizzazione migliore per concordare una terminologia da utilizzare sia nella letteratura accademica che in quella informale e raggiungere delle decisioni politiche basate su un approccio scientifico. Nella ricerca effettuata si è voluto espandere la concettualizzazione di deforestation risk facendo riferimento al caso delle pelli bovine (di qui in avanti semplicemente, pelli) e in particolare al caso della produzione di pelli/prodotti di conceria in Brasile. Il focus sulle pelli ha molteplici ragioni. In primo luogo, mentre il ruolo degli allevamenti zootecnici come causa di deforestazione in Brasile è soggetto ad una crescente attenzione da parte dell’opinione pubblica, la filiera di produzione delle pelli rimane ancora inesplorata. Fatta eccezione per poche imprese leader del settore dei prodotti in pelle, il dibattito sulla trasparenza di questa filiera e il rischio di deforestazione ad essa associato è praticamente assente. In secondo luogo, la filiera della pelle è di norma molto più complessa rispetto a quella della carne bovina e coinvolge numerosi attori sia a livello nazionale che internazionale, ivi compresi gli intermediari, le concerie, le case di moda, ecc. Ciò crea delle discontinuità nella tracciabilità della pelle e complica l’identificazione del rischio di deforestazione lungo la filiera. Infine, la pelle è un bene che per propria stessa natura è legato a rapporti di forza squilibrati tra gli attori della filiera. Una terza ragione per la scelta del settore della pelle è data dal fatto che, poiché la pelle è spesso considerata un prodotto di scarto secondario della carne bovina, ne consegue che gli attori coinvolti nella filiera sostengono di avere uno scarso potere di negoziazione per imporre i loro standard e delle condizioni di non-deforestazione ai produttori. Al contempo, gli attori a valle della filiera, come le case di moda, sono maggiormente esposti a rischi di natura reputazionale rispetto alle imprese del settore della carne. In conseguenza di tale situazione vi è il fatto che la pelle è un bene con costi e benefici distribuiti in maniera asimmetrica all’interno della filiera. Mentre a monte gli allevatori mancano delle risorse per rispettare standard di sostenibilità e spesso non beneficiano di nessuna compensazione economica per il pellame dei propri bovini, i prodotti finiti in pelle sono visti come beni di lusso, con elevati margini di guadagno per le aziende che li producono e commerciano. Questa ricerca impiega sia dati primari che secondari. I dati primari sono principalmente di tipo qualitativo e derivano da trentanove interviste semi-strutturate e audio-registrate condotte sotto forma sia di colloqui vis-à-vis che a distanza (video-chiamate) durante una missione in Brasile tra maggio e agosto 2018. Tali dati sono stati utilizzati prevalentemente ai fini dell’analisi del discorso (discourse analysis) presentata nel secondo capitolo e come riferimenti interpretativi e di lettura del contesto per l’analisi dei dati quantitativi secondari presentata nei rimanenti capitoli. I dati e le informazioni secondari sono stati derivati da un’estesa analisi della letteratura e analisi di dati statistici relativi a mattatoi, registri su pelli bovine grezze e semilavorate e processi di deforestazione; sono stati inoltre considerati dati geospaziali relativi alle aree deforestate e alla localizzazione dei mattatoi e delle concerie; da ultimo sono stati considerati dati relativi al commercio di pelli e prodotti derivati tra Brasile e Italia. Nessun intervallo di tempo specifico è stato selezionato a priori per l’analisi dei dati: le serie temporali sono state selezionate a seconda della disponibilità di dati e delle necessità relative alle singole tipologie di analisi impiegate. Dai risultati emerge che la filiera delle pelli ha un rischio deforestazione significativo nonostante il pellame non sia un prodotto primario dell’allevamento bovino e un fattore diretto di deforestazione. Il rischio si colloca principalmente nel legame con le attività zootecniche e di allevamento, nell’incompleta tracciabilità della filiera così come nel commercio interno e internazionale di pelle. Le pelli prodotte in Brasile e importate per essere successivamente lavorate in Italia incorporano un livello significativo di rischio di deforestazione a causa degli intensi scambi commerciali tra i due Paesi. Il rischio di deforestazione legato alle pelli è affrontato in maniera diversa dai diversi discorsi esistenti sul tema e pone in evidenza come l’articolarsi della trama di ciascun discorso comporti l’attenzione sia su aspetti visibili che invisibili rispetto alla sostenibilità, all’equità e alla legalità delle filiere in questione. I risultati mettono in risalto l’importanza del ruolo e della voce degli agricoltori di frontiera, mostrando come la loro visione e interpretazione informi un discorso politico incentrato sul tema della sopravvivenza e del sostentamento. È quindi necessaria una maggiore attenzione da parte dell’opinione pubblica sulle filiere produttive, ivi comprese quelle delle pelli e dei prodotti derivati, e in particolare sulle relazioni non eque di potere, così come sull’importanza di un’inclusione significativa di gruppi vulnerabili della popolazione. L’industria del pellame e i grandi marchi dovrebbero essere più proattivi, inviando al mercato un chiaro segnale per cui la deforestazione e altre forme di illegalità non possono essere tollerate. Una piena tracciabilità della filiera e il coinvolgimento dei produttori è imprescindibile se l’industria mira a produrre e commerciare prodotti che non siano responsabili di o coinvolti in processi di deforestazione.
Large-scale industrial agricultural production and commodity trade are increasingly linked to deforestation and forest degradation in the tropics. This link is described via the concept of ‘deforestation risk’. Agricultural products whose production or extraction involves deforestation and native vegetation clearing are classified as forest-risk commodities. Beef, soybean, palm oil, and timber - the commodities with deforestation risk - are considered the “big four” of forest-risk commodities. Due to the complexity of global production and trade systems there are commodities that possess the risk of originating from deforested areas without being direct deforestation/forest degradation drivers. This dimension of the risk is either overlooked or held as secondary in the debates about commodity-driven deforestation. Differentiation between commodities with direct causal links and those with the exposure to deforestation in their supply chain has impact on how responsibility and accountability is constructed both through legal measures and self-regulatory voluntary standards. Better conceptualization is needed to approximate the usage of the terms both in grey and academic literature and to achieve science backed policy decisions. By referring to the case of bovine leather (hereinafter just leather) and the case of Brazilian leather production we aim to expand the conceptualization of deforestation risk. We focus on leather for multiple reasons. First, while the role of cattle in driving deforestation in Brazil is subject to increasing public scrutiny, the leather commodity chain largely remains in the shadow. Except for a few leading firms in leather goods, public discussion about transparency across the leather supply chain and associated deforestation risk is mostly absent. Second, leather supply chains are more complex compared to beef and involve many national and international players, including intermediary sellers, tanneries, fashion houses, etc. This creates traceability gaps and complicates identifying deforestation risk along the chain. Third, leather is a commodity with inherently uneven power relations among the actors in the supply chain and with costs and benefits unevenly distributed across the chain. Often considered a waste or by-product to beef meat, actors in the leather supply chain argue to lack important negotiation power to impose their standards and no deforestation conditions upon producers. At the same time, downstream actors of leather supply chain, such as fashion brands, are more susceptible to reputational risks compared to that of beef. While upstream farmers lack resources to adhere to sustainability standards and hardly get any financial compensation for the skin of their cattle, finished leather products are often regarded as luxury products presenting very high price margins for producing/trading brands. This research employs both primary and secondary data. Primary data is mostly qualitative and entails thirty-nine semi-structured, recorded, and transcribed interviews, in the form of both face-to-face and video call interviews conducted during extended field visit to Brazil in May-August 2018. This data is mainly used for the discourse analysis in the second chapter and for interpretative and contextual purposes to analyse the secondary quantitative data in the other chapters. Secondary information consists of extensive literature review, statistical data on annual slaughter, bovine hide/leather registry and annual deforestation, geospatial data on deforestation, slaughterhouse and tannery locations, as well as, trade statistics on Brazilian-Italian leather trade. No specific time frame was chosen to analyse the data and time series for each data set were selected according to availability and the specific requirements of each type of analysis. The results show that bovine leather supply chains possess significant risk of embedded deforestation despite leather not being a primary product of cattle ranching and driver of deforestation. The risk reveals itself in the link with cattle ranching, incomplete supply chain traceability, as well as in interstate and international leather trade. The Brazilian-Italian bovine leather has significant level of embedded deforestation due to intensive trade relations. Different discourses articulate deforestation risk of bovine leather differently and highlight how the storylines of each discourse bring attention both to what is made visible and invisible in relation to sustainability, legitimacy, and fairness. The results emphasise the importance of the role and voice of frontier settlers, by presenting how their storylines inform a political discourse on livelihoods. There is a need for increased public scrutiny of supply chains, including the leather one, and for special attention to unequal power relations and the importance of meaningful inclusion of vulnerable groups and populations. The leather industry and big brands need to be more proactive by sending clear market signals that deforestation and other illegalities are not tolerated. Full coverage and traceability of the supply chain and engagement with the producers is necessary if the industry wants to produce and trade deforestation-free products.

Este trabalho analisa o aspecto lírico-religioso de três canções marianas, recolhidas do Cancioneiro Popular do imigrante italiano na Região de Colonização Italiana e se propõe revelar, sob o aspecto das metáforas e das metonímias, a representação de Maria. Para tanto, este estudo dialoga com temas imprescindíveis para a obtenção de resultados, como História, Cultura, Identidade, Regionalidade, Mariologia, Metáforas, Metonímias (a Teoria de Metáforas Conceituais) e música. Assim sendo, a dissertação está estruturada sobre quatro capítulos que norteiam a análise e a interpretação. A saber: o Primeiro Capítulo entrelaça a História e a Cultura, procurando fazer uma revisão de aspectos relevantes da história da imigração italiana na RCI na Região Nordeste do Estado, focando a importância da religião e ou da fé desde os primórdios desse processo. A partir disso, há a análise sobre Região, Identidade e Religiosidade. O Segundo Capítulo destaca o Cancioneiro Popular e assim, o aspecto da Tradição Oral Popular. Aprofunda o aspecto da cultura popular expressada com o canto e traz em evidência a caracterização do Canto Mariano (origens, ritualismo e devoção do imigrante italiano). Demonstra, ainda, aspectos da devoção mariana, tão presente e viva junto ao imigrante, pois Maria é descrita como sendo a mãe que está sempre presente e junto aos seus filhos (povo). O Terceiro Capítulo, por sua vez, concentra a análise dos aspectos da Teoria da Metáfora Conceitual, da Simbologia e, também, da interpretação e pesquisa sobre as Virtudes, objetivando a análise da figura da mulher idealizada , ou ainda, da representação da mãe - Maria (Madonna). Por fim, no Quarto Capítulo, tem-se a Metodologia e a Análise das canções marianas, ou seja, a análise do corpus das canções: Beléssa di Maria; Maria Consolatrice; O Bèla mia Speransa, que motivam este estudo. Esta parte segue o método da análise semântica com base em George Lakoff (e colaboradores) que permeiam o estudo das metáforas conceituais. Há, também, a posição etnográfica, onde é destacada a pesquisa de campo realizada para conhecer opiniões e perspectivas do povo, indo além da análise do pesquisador. Após isso, é feita a síntese com os resultados obtidos pela pesquisa/estudo.
Submitted by Marcelo Teixeira (mvteixeira@ucs.br) on 2014-05-28T17:29:23Z No. of bitstreams: 1 Dissertacao Lauro Edson da Cas.pdf: 660533 bytes, checksum: 67162060ee2c9127d36245efbaca0ad2 (MD5)
Made available in DSpace on 2014-05-28T17:29:23Z (GMT). No. of bitstreams: 1 Dissertacao Lauro Edson da Cas.pdf: 660533 bytes, checksum: 67162060ee2c9127d36245efbaca0ad2 (MD5)
This study analyzes the religious lyrical aspect of three Marian songs, collected from the book Cancioneiro Popular do Imigrante Italiano na Região de Colonização Italiana, and also intends to clarify, using metaphors and metonymies, the representation of Mary. To do that, this study takes into consideration imprescindible issues such as History, Culture, Identity, Religiosity, and Mariology, Metaphors, Metonymies (Conceptual Metaphor Theory) and music. This dissertation is structured upon four chapters as follows: the first chapter links History and Culture, trying to revise some relevant points of the history of the Italian immigration on the RCI in the Northeast Region of our state, focusing on the importance of religion and/or faith since the beginning of that process. Therefore, there is the analysis about the Region, Identity and Religiosity. The second chapter highlights the Cancioneiro Popular and then, the Popular Oral Tradition. Also, it deepens the aspect of popular culture expressed by the songs and brings into evidence the characterization of the Marian Songs (origins, ritualism and devotion of the Italian immigrant). Moreover, it shows some aspects of the Marian devotion, so present and alive within the immigrant, because Mary is described as the mother who is always with her children (the people). The third chapter, in turn, focus on the analysis of aspects of the Conceptual Metaphor Theory , of the Symbolism, and also of the interpretation and research regarding the Virtues, aiming at analyzing the idealized woman´s portrait , or still, the representation of the mother Mary (Madonna). At last, presented in the fourth chapter are the Methodology and the Analysis of the Marian Songs, that is, the analysis of the corpus of songs: Beléssa di Mary, Mary Consolatrice and O Bela mia Speransa that motivate the study. This part follows the method of semantic analysis, based on George Lakoff (and collaborators) that permeates the study of the conceptual metaphors. There is the ethnographic position as well, where is emphasized the field work carried out to know opinions and perspectives of the people, going beyond the researcher´s analysis. After that, the synthesis is done with the obtained results by the research/study.

The publication collects the contributions presented during the International Symposium of the Italian UNESCO Chairs (CONIUS) entitled Human Rights and Sustainable Development Goals 2030, which took place on 16 November 2018 at the University of Florence. The contributions of national and international experts address the Global Aims for Sustainable Development of the UNESCO including Sustainable Development Goals (SDGs) n. 3 Improvement of the ‘Global Health’, n. 4 ‘Quality Education’, n. 11 ‘Cities and Inclusive Human Sett lements’ and n. 16 ‘Peace and Justice’, using transdisciplinary and transnational perspectives and implemented through theoretical studies and good practices.

Abstract. The use of end-of-life and end-of-use products to recover parts and raw materials can mitigate the severity of the increasing price of raw materials, the disruption of global supply chains for critical raw materials (e.g., chips and rare earth elements), and reduce the environmental impacts. Furthermore, circular economy strategies can improve scheduling by shortening the completion times of the components. This paper investigates the effects of implementing circular economy strategies (repair, reuse, and re-manufacturing) at the scheduling level in a manufacturing system involving disassembly, re-manufacturing, and assembly operations. A set of eight priority rules modify the job priority and the strategy implementation. The results show that including circular economy strategies through disassembly can reduce the makespan, but scheduling is pivotal to managing the frequent changes in the quality of end-of-life products and their volumes and the current production order mix.

The term “Supply Chain Management” (SCM) denotes the creation, integration, planning and control of all elements of universal added-value chains, from the procurement of raw materials to the final delivery to the customer. IT offer huge potentials for Small and Medium-sized Enterprises to activate effective SCM mechanisms. Even though experts estimate the potential saving that can be achieved through the implementation of effective SCM strategies at 3-5 per cent of turnover, SMEs are experiencing a great deal of difficulty in coping with these strategies. Reasons for this, especially among small enterprises (50 employees and under), are to be found in the specific enterprise culture. The results presented in this paper are the outcome of an EU funded project named “Supply Chain Partnership”, a pilot project aimed at analysing the communication, social and technological obstacles to the implementation of effective SCM strategies in SMEs. The focus of this paper is on the Italian experience, and concerns an industrial district located in Sicily.

Abstract. Polymer foaming is a process broadly used for manufacturing light weight packaging solutions. Polystyrene (PS) is the most widespread material for this application, as it combines easy processability, low cost and high performance of the resulting items. However, foamed PS is difficult to recycle and highly polluting for the oceans and aquatic environment. Polyethylene terephthalate (PET) is, instead, commonly recycled and R-PET is broadly used for several industrial applications. Yet, PET quickly loses viscosity during the foaming process, due to thermo-hydrolytic and oxidative degradation thus causing poor foaming. In this paper, an innovative combination of chain extenders, anti-oxidants and nucleating agents to modify PET rheology is studied. The additives were experimented both in off-line and in-line apparatus. The experimental results show PET rheology can be customized by appropriately modulating the content of the different additives, thus making PET suitable for foaming process of high-quality items.

The contribution aims to investigate integrated supply chain models in Italy. Through the analysis of some case studies, it aims to provide an initial mapping of territories where the involvement of communities in the production chains of local companies has generated sustainable circular supply chain models. In addition to the need to take action on carbon emissions (Coccia, 2022), there is a clear need to focus attention on a local dimension of textile and fashion production, capable of conceiving its own doing as part of a totality in which all the living beings that belong to a specific territorial ecosystem move, understood as a set of relations between an environmental system and a human society, which, organised also with evolved urban structures, find in that environmental system most of the fundamental resources for life, developing culturally and producing a system of relations, symbols, knowledge. The concept of the territorial ecosystem becomes fundamental for practicing the concept of sustainability of human settlements (Saragosa, 2001). By shifting the focus to the creation of a virtuous system capable of including and revitalizing local realities (Vaccari, 2021) by building a new system (Fletcher, 2013), new value can be generated and overcome not only the climate crisis but also the cultural crisis in which contemporary society finds itself. The research aims to build the foundations for starting a mapping exercise of those Italian territories, with a focus on central regions such as Tuscany and Marche, where a strategic scenario emerges made up of entrepreneurial realities in which the chain of processes and operations is collectively distributed among the various players. Starting with the raw material and ending with the finished product, the territorial manufacturing assets are distributed among the various actors who manage the various stages of the chain independently.Among these, a virtuous example is Re.Verso, a collaborative circular economy programme in Tuscany, focused on the reuse, recycling, and reduction of textile waste through the construction of a participative community. The programme aims to build an integrated, transparent, traceable, and certified supply chain divided into three phases: sourcing and selection of post-consumer materials, mechanical transformation of these raw materials, and development of a new product through the production of yarn, fabric, and finished accessories. The research aims to investigate a model of innovative practices, which are expressed in participative design dynamics, relations with the territory, new narratives, and synergies between people and communities (Franzo, 2020). To investigate these realities, located in a varied geographical context, which have chosen to work together, to make and create a new system, aimed at the survival and recovery of their economy, to bring the places back to life by preserving skills and knowledge. It is a pervasive revolution that is changing the whole of society, not just industry, so much so that people started talking first about enterprise 4.0 and then about supply chain 4.0 up to ecosystem 4.0 (Idevaia, Resce, 2019).

The research addresses contemporary trends in the ceramic sector in Italy, emphasizing formal, emotional, and functional innovation through the application of digital tools in two case studies. The digital transition in the Italian manufacturing sector involves multiple aspects, such as the automation of production processes, the adoption of advanced technologies, the digitization of supply chains and the implementation of artificial intelligence solutions. The adoption of advanced technologies such as the Internet of Things (IoT), artificial intelligence (AI) and augmented reality (AR) is also becoming increasingly common in this in the context, enabling real-time data collection and analysis, process optimization, improved product quality and, in general, improved efficiency and innovation.Therefore, in both case studies, the goal is to demonstrate the development possibilities of new formal and chromatic solutions for ceramic artefacts, facilitating new product customization models, emotional values and functions.

Process plants are vulnerable to natural hazards and, in particular, to earthquakes. Nevertheless, the quantitative assessment of seismic risk of process plants is a complex task because available methodologies developed in the field of civil and nuclear engineering are not readily applicable to process plants, while technical standards and regulations do not establish any procedure for the overall seismic risk assessment of industrial process plants located in earthquake-prone areas. This paper details the results of a case study performing a seismic risk assessment of an Italian refinery having a 85,000 barrels per day production capacity, and a storage capacity of over 1,500,000 m3. The analysis has been carried out resorting to a novel quantitative methodology developed in the framework of a European Union research program (INDUSE 2 SAFETY). The method is able to systematically generate potential starting scenarios, deriving from simultaneous interactions of the earthquake with each separate equipment, and to account for propagation of effects between distinct equipment (i.e. Domino effects) keeping track of multiple simultaneous and possibly interacting chains of accidents. In the paper the methodology, already described elsewhere, is briefly resumed, and numerical results are presented showing relevant accident chains and expected economic loss, demonstrating the capabilities of the developed tool.

Responding to a sustainable production is an imperative that is gaining more and more relevance in the definition of specific programs and strategies at national and international level. This urgency leads towards zero waste and circular models and processes that minimize the extraction of resources from the biosphere and do not create waste; instead, when the waste of natural or anthropogenic transformations cannot be avoided, their valorization as resources must be carried out. The development of integrated supply chains, knowledge transfer between different disciplines and the dialogue between research and industry becomes fundamental for the achievement of these objectives. Existing studies in the literature regarding the agri-food production chain in Italy show that the sector, whose environmental impacts are by no means marginal, is fragmented in many small production companies; an interesting and critical aspect at the same time since the generation of waste is not accompanied by an appropriate dissemination of data at a quantitative-qualitative level and there is no clear regulatory framework available on alternative management and valorisation methods. Design, given its natural inclination to transversality, allows to trace scenarios in which to configure, through interdisciplinary approaches, the sustainability models that are intended to be covered in this contribution. Moreover, its methods and tools allow to develop a critical thinking starting from the very early designing phase. The paper addresses the valorisation of agro-industrial waste in a circular and systemic perspective through the presentation of a review of case studies from the textile supply chain, which is one of the most relevant for Italian industry.Due to its disastrous environmental impact, the global textile industry is today the subject of extensive research aimed at the development of innovative materials and processes in order to overcome the traditional linearity of the textile supply chain. The negative impacts of the textile industry are distributed along the entire value chain and are mainly attributable to greenhouse gas emissions -for which the textile industry represents the fifth manufacturing sector- consumption and pollution of water resources and the production of textile waste. In particular, the production of synthetic fibers, which is estimated to be almost two thirds of the global fiber production, is associated with a high use of non-renewable resources and emissions, which derives from the extraction of fossil fuels. In this sense, the valorisation of agro-industrial waste as secondary raw materials and new sustainable inputs for the textile supply chain, represents an opportunity not yet fully explored, in particular as regards the development of a new generation of fibers, yarns and eco-compatible fabrics alternative to the materials currently in use. Bio-based wastes and by-products from agri-food industry could as well present enormous potential for valorisation in the textile finish due to their intrinsic properties (antimicrobial, prebiotic, antioxidant activity, among others). At present, nevertheless, textiles from agro-residues do not completely meet the requirements to make them an attractive replacement for conventional fibre sources. Future research should therefore focus on identifying new agro-residue based blends that offer both performance and sustainability, adopting a systemic design approach based on interdisciplinary and interconnections as a strategy for innovation.

"Contract catering industry is concerned with the production of ready-to-eat meals for schools, hospitals and private companies. The structure of this market is highly competitive, and customers are rarely willing to pay a high price for this catering service. A single production sites may be demanded up to 10.000 meals per day and these operations can hardly be managed via rule of thumbs without any quantitative decision support tool. This situation is common at several stages of a food supply chain and the methodologies presented in this paper are addressed to any food batch production system with similar complexity and trade-offs. This paper proposes an original KPI dashboard, designed to control costs, time and quality efficiency and helping managers to identify criticalities. Special emphasis is given on food safety control which is the management’s main concern and must be carefully monitored in each stage of the production. To calculate the value of KPIs a Montecarlo simulation approach is used to deal with production complexity and uncertainty. A case study showcases the potential of simulation in this complex industrial field. The case study illustrates an application of the methodology on an Italian company suffering local recipe contamination. The company aims at defining the best standard for production, identifying cycles being sustainable from an economic and environmental point of view."

The paper presents part of the results of two studies, the European “Radar” (Raising Awareness on renewable energy Developing Agro-eneRgetic chain models) Project and the “Energy and environmental plan for the consortium of the municipalities of the Esino-Frasassi mountain area”, conducted in an area in central Italy. The area is characterized by huge forestry biomass resources and by substantial amounts of agricultural residues. The work presents a technical-economic study of a cogeneration plant using a solid biomass-fuelled micro turbine as the prime mover. The energy conversion of solid biomass can be achieved with different technologies, e.g. organic Rankine cycles, micro turbines with an external combustion chamber, or Stirling engines. The choice of the conversion system depends mainly on biomass availability and on the level of user demand. Of the conversion technologies mentioned above, the micro turbine is suitable to meet the requirements of the cogeneration plant examined here, which is applied to a low thermal demand public building. The work describes a micro turbine based on a regenerative Brayton cycle endowed with an external combustion chamber. The inlet air, after being compressed, passes through a regenerator and then through an external furnace fuelled by solid biomass, where it is further heated, and finally expands through the turbine. The outlet air of the turbine, before being funnelled through the chimney, passes through the regenerator and subsequently through a dry kiln, thereby reducing the humidity of the solid biomass. The micro turbine studied produces 75 kWe and 300 kWt. The biomass is made up of olive tree prunings. After the technical analysis, an economic study stresses the critical role of incentives systems (herein provided by the Italian legislation) in making the technology appealing to investors in renewable energy solutions. The energy and economic analysis considers different combinations of three different amounts of annual operation hours, of two operating modes (with/without cogeneration) and three purchase prices of the solid biomass. The incentives mechanism considered is the Feed-In Tariff (FiT) granted by the Italian legislation for plants &lt; 1 MWe. The economic analysis highlights some influential factors for solid biomass-fuelled systems: contract with fuel suppliers, biomass price, availability, transportation, storage, and processing, and plant location. In particular, the purchase price of solid biomass is substantially negotiated between the manager of the energy conversion plant and suppliers. The work demonstrates the crucial role of the incentives mechanisms for economic sustainability; the strong influence of biomass price on investment profitability; and the role of cogeneration in further shortening the payback period.

Agriculture and food manufacturing have a considerable effect on the environment emissions: holdings and farms play an important role about greenhouse gas emissions and water consumption. This study aims at evaluating the environmental impact of one of the most important Italian DOP product: organic Parmesan Cheese. Environmental performances of the whole dairy supply chain have been assessed according to the life cycle assessment approach (LCA). In this analysis Parmesan Cheese is made from an organic dairy farm in Emilia Romagna, which uses the milk from three different organic livestock productions. Organic agriculture is different from conventional; the major difference is represented by the avoidance of the use of synthetic fertilizers and pesticides made in chemical industry process. Organic agriculture uses organic fertilizers to encourage the natural fertility of the soil respecting the environment and the agro-system. In this case, life cycle approach is used to assess the carbon footprint and the water footprint of organic Parmesan Cheese considering the milk and cheese production. The object at this level is investigating the environmental impact considering the situation before some improvement changes. The functional unit is represented by 1 kg of organic Parmesan Cheese; inventory data refer to the situation in year 2017 and system boundaries consider the inputs related to the cattle and dairy farm until the ripening (included). The carbon footprint is investigated using IPCC 2013 Global Warming Potential (GWP) 100a method, developed by Intergovernmental Panel on Climate Change, and reported in kg of CO2eq. Otherwise, water footprint allows to measure the water consumption and in this work it is assessed using AWARE method (Available Water REmaining).

This paper reports on an illustrative human rights impact assessment (HRIA) of the Italian wine supply chains of Systembolaget, the Swedish monopoly alcohol retailer. The HRIA aimed to evaluate the actual and potential human rights impacts at the production stage of the value chain in Italy, to identify their root causes, and to provide recommendations to relevant stakeholders concerning their prevention, mitigation and/or remediation. The assessment took just over a year and consisted of five phases of analysis using a methodology aligned with the UN Guiding Principles on Business and Human Rights (UNGPs). However, the onset of Italy’s severe first wave of coronavirus in 2020 meant that the assessment team was unable to conduct the field study phase with the full rigour required of an HRIA. The field phase started in September 2019, with an initial assessment phase based on a literature review and a round of stakeholder interviews from September 2019 to March 2020. Further, limited, worker interviews were conducted from October 2020 to January 2021. The result is an illustration of the human rights risks that are present in the areas of Italy from which Systembolaget sources its wine.

Based upon insights of the global value chain literature, the aim of this paper is to investigate the impact of being a supplier firm on labour productivity. The country of analysis is Italy, historically characterized by a very strong division of labour among firms. We make use of a unique database, which collects information on several organizational, structural and performance variables of a representative sample of more than 3000 Italian manufacturing firms, spanning the period 1998-2006. Our econometric investigation confirms predictions coming from the global value chain literature. By and large, our findings indicate that being a “traditional” supplier is associated with lower levels of productivity in comparison with the ones exhibit by final firms. However, supplier firms that both export a significant percentage of their production and carry out product or process innovations (i.e. the subset of suppliers that we name “advanced suppliers” against “traditional suppliers”) display productivity levels not lower (and, actually, higher) than final firms ones.