Gotowe bibliografie tematyczne / IR photodetector

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „IR photodetector”

Autor: Grafiati

Data publikacji: 1 lutego 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „IR photodetector”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "IR photodetector"

Khurelbaatar, Zagarzusem, i Chel Jong Choi. "Graphene/Ge Schottky Junction Based IR Photodetectors". Solid State Phenomena 271 (styczeń 2018): 133–37. http://dx.doi.org/10.4028/www.scientific.net/ssp.271.133.

Pełny tekst źródła

Streszczenie:

Ge p-i-n photodetectors with and without graphene on active area fabricated and investigated the graphene effects on opto-electrical properties of photodetectors. The photodetectors were characterized with respect to their dark, photocurrents and responsivities in the wavelength range between 1530-1630 nm. For a 250 um-diameter device at room temperature, it was found that dark current of p-i-n photodetector with graphene were reduced significantly compared with photodetector without graphene. This improvement is attributed to the passivation of the graphene layers that leads to the efficient light detection. Therefore, it is noted that the uniform coverage of graphene onto the Ge surface plays a significant role in advancing their opto-electrical performance of photodetector.

Style APA, Harvard, Vancouver, ISO itp.

Boltar, K. O., I. D. Burlakov, N. I. Iakovleva, P. V. Vlasov i P. S. Lazarev. "Modern Photodetector IR-Modules". Journal of Communications Technology and Electronics 67, nr 9 (wrzesień 2022): 1175–84. http://dx.doi.org/10.1134/s1064226922090030.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Esman, A. K., V. K. Kuleshov i G. L. Zykov. "Microcavity array IR photodetector". Quantum Electronics 39, nr 12 (31.12.2009): 1165–68. http://dx.doi.org/10.1070/qe2009v039n12abeh014148.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tang, Xiaobing, Zhibiao Hao, Lai Wang, Jiadong Yu, Xun Wang, Yi Luo, Changzheng Sun i in. "Plasmon-Enhanced Hot-Electron Photodetector Based on Au/GaN-Nanopillar Arrays for Short-Wave-Infrared Detection". Applied Sciences 12, nr 9 (23.04.2022): 4277. http://dx.doi.org/10.3390/app12094277.

Pełny tekst źródła

Streszczenie:

The complex device structure and costly preparation process have hindered the development and application of the GaN-based ultraviolet and infrared (UV–IR) dual-color photodetector. In this work, we designed and prepared an Au/GaN-nanopillar-based hot-electron photodetector that can operate in the short-wave infrared range, well below the GaN bandgap energy. A suitable Schottky barrier height was developed for a higher photo-to-dark current ratio by post-etching annealing. The surface plasmons generated by Au/GaN-nanopillar arrays could effectively improve the light absorption efficiency. As a result, compared with the planar device, the responsivity of the Au/GaN-nanopillar device could be enhanced by about two orders of magnitude. With the advantages of a simple structure and easy preparation, the proposed devices are promising candidates for application in UV–IR dual-color photodetection.

Style APA, Harvard, Vancouver, ISO itp.

Qi, Tao, Yaolun Yu, Yanyan Hu, Kangjie Li, Nan Guo i Yi Jia. "Single-Walled Carbon Nanotube-Germanium Heterojunction for High-Performance Near-Infrared Photodetector". Nanomaterials 12, nr 8 (8.04.2022): 1258. http://dx.doi.org/10.3390/nano12081258.

Pełny tekst źródła

Streszczenie:

In this research, we report on a high-performance near-infrared (near-IR) photodetector based on single-walled carbon nanotube-germanium (SWCNT-Ge) heterojunction by assembling SWCNT films onto n-type Ge substrate with ozone treatment. The ozone doping enhances the conductivity of carbon nanotube films and the formed interfacial oxide layer (GeOx) suppresses the leakage current and carriers’ recombination. The responsivity and detectivity in the near-IR region are estimated to be 362 mA W−1 and 7.22 × 1011 cm Hz1/2 W−1, respectively, which are three times the value of the untreated device. Moreover, a rapid response time of ~11 μs is obtained simultaneously. These results suggest that the simple SWCNT-Ge structure and ozone treatment method might be utilized to fabricate high-performance and low-cost near-IR photodetectors.

Style APA, Harvard, Vancouver, ISO itp.

Li, Fa Jun, Li Ying Tan i Yan Ping Zhou. "Design and Analysis InGaAs Near-IR Nanowire Photodetector for High Speed Satellite Laser Communication Application". Applied Mechanics and Materials 556-562 (maj 2014): 5163–67. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.5163.

Pełny tekst źródła

Streszczenie:

InGaAs is direct and narrow bandgap material with ultrahigh electron mobility, and is a promising candidate for optoelectronic device in the near-infrared region. The main objective of this manuscript is to design an InGaAs semiconductor-based photodetectors nanowire infrared photodetector, which would be manipulated in optical response wavelength range at room temperature with high-detective and fast-responsive performances. Considering into account mature technology in laser device and for maximizing 1.55 um optical communication performance, the design of achieved bandwidth is >1 Gbps. According to the theoretical calculations, the fundamental parameters of the InGaAs core-shell nanowire APD photodetector device are obtained, with certain values of single nanowire diameter, lateral size and applied voltage,r=100 nm,l=1 μm,Vbias=10 V. Meanwhile, we deal with the electrons mobility of the internal nanowire based on three factors, size effect, temperature and electric field effect. The results demonstrate that the InGaAs nanowire APD is potential candidatefor high rate in satellite laser communication field.

Style APA, Harvard, Vancouver, ISO itp.

Salih, A. A., W. K. Abad, S. A. Fadaam i B. H. Hussein. "Fabrication of lead oxide nanoparticles by green synthesis method for photovoltaic applications". Digest Journal of Nanomaterials and Biostructures 18, nr 4 (30.10.2023): 1225–33. http://dx.doi.org/10.15251/djnb.2023.184.1225.

Pełny tekst źródła

Streszczenie:

PbO NPs have been prepared by green synthesis. The diffraction patterns of α-PbO-NPs are shown by the XRD pattern, and the β-PbO-NPs have proven the tetragonal and orthorhombic structure. PbO has an optical energy gap of 4.2 eV. The FT-IR observed bond at 676 cm-1 attributed to the existence of PbO stretch. Nanoparticals with spherical and semi-spherical shapes are formed, as seen in the SEM image. The average particle size was under 100 nm. Fabrication and characterization of a high performance Ag/PbO/PSi/pSi/Ag heterojunction photodetector. The photodetector's responsivity was 0.7 A/W at 850 nm. The maximum detectivity and quantum efficiency spectra 1.009 ×1013 at 850 nm and 3×102 at 200nm which indicates that PbO NPs made using this technique have a good chance of being used to create porous silicon photodetectors with high performance heterojunctions.

Style APA, Harvard, Vancouver, ISO itp.

Muñoz, A., J. Meléndez, M. C. Torquemada, M. T. Rodrigo, J. Cebrián, A. J. de Castro, J. Meneses i in. "PbSe photodetector arrays for IR sensors". Thin Solid Films 317, nr 1-2 (kwiecień 1998): 425–28. http://dx.doi.org/10.1016/s0040-6090(97)00576-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Basyooni-M. Kabatas, Mohamed A., Shrouk E. Zaki, Khalid Rahmani, Redouane En-nadir i Yasin Ramazan Eker. "Negative Photoconductivity in 2D α-MoO3/Ir Self-Powered Photodetector: Impact of Post-Annealing". Materials 16, nr 20 (19.10.2023): 6756. http://dx.doi.org/10.3390/ma16206756.

Pełny tekst źródła

Streszczenie:

Surface plasmon technology is regarded as having significant potential for the enhancement of the performance of 2D oxide semiconductors, especially in terms of improving the light absorption of 2D MoO3 photodetectors. An ultrathin MoO3/Ir/SiO2/Si heterojunction Schottky self-powered photodetector is introduced here to showcase positive photoconductivity. In wafer-scale production, the initial un-annealed Mo/2 nm Ir/SiO2/Si sample displays a sheet carrier concentration of 5.76 × 1011/cm², which subsequently increases to 6.74 × 1012/cm² after annealing treatment, showing a negative photoconductivity behavior at a 0 V bias voltage. This suggests that annealing enhances the diffusion of Ir into the MoO3 layer, resulting in an increased phonon scattering probability and, consequently, an extension of the negative photoconductivity behavior. This underscores the significance of negative photoconductive devices in the realm of optoelectronic applications.

Style APA, Harvard, Vancouver, ISO itp.

Lu, Qin, Li Yu, Yan Liu, Jincheng Zhang, Genquan Han i Yue Hao. "Low-Noise Mid-Infrared Photodetection in BP/h-BN/Graphene van der Waals Heterojunctions". Materials 12, nr 16 (9.08.2019): 2532. http://dx.doi.org/10.3390/ma12162532.

Pełny tekst źródła

Streszczenie:

We present a low-noise photodetector based on van der Waals stacked black phosphorus (BP)/boron nitride (h-BN)/graphene tunneling junctions. h-BN acts as a tunneling barrier that significantly blocks dark current fluctuations induced by shallow trap centers in BP. The device provides a high photodetection performance at mid-infrared (mid-IR) wavelengths. While it was found that the photoresponsivity is similar to that in a BP photo-transistor, the noise equivalent power and thus the specific detectivity are nearly two orders of magnitude better. These exemplify an attractive platform for practical applications of long wavelength photodetection, as well as provide a new strategy for controlling flicker noise.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "IR photodetector"

Cheak, Seck Fai. "Detecting near-UV and near-IR wavelengths with the FOVEON Image Sensor /". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Dec%5FCheak.pdf.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Combat Systems Technology)--Naval Postgraduate School, Dec. 2004.
Thesis Advisor(s): Gamani Karunasiri, Richard C. Olsen. Includes bibliographical references (p. 57-60). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

Desgué, Eva. "Control of structural and electrical properties of bilayer to multilayer PtSe₂ films grown by molecular beam epitaxy for high-performance optoelectronic devices". Electronic Thesis or Diss., université Paris-Saclay, 2024. http://www.theses.fr/2024UPASP170.

Pełny tekst źródła

Streszczenie:

Le PtSe₂ est un matériau 2D de la famille des dichalcogénures de métaux de transition (TMDs) qui présente des propriétés intrinsèques exceptionnelles : mobilité des porteurs de charge élevée (200 - 450 cm².(V.s)⁻¹), gap électronique ajustable en fonction du nombre de monocouches (MLs), absorption optique large bande et excellente stabilité à l'air. Ces propriétés sont idéales pour des applications (opto)électroniques. Cependant, la croissance de PtSe₂ de haute qualité cristalline sur un substrat à bas coût et isolant reste un enjeu majeur. Ici, la synthèse de PtSe₂ bicouche à multicouche (< 20 MLs) par épitaxie par jets moléculaires (MBE) est optimisée sur un substrat de saphir. Les caractérisations systématiques comprennent la diffraction électronique (RHEED), la spectroscopie Raman, la spectroscopie de rayons X à dispersion d'énergie (EDS) et des mesures électriques de conductivité. Pour les films épais de PtSe₂ semi-métallique, on démontre que des températures élevées de croissance (520 °C) et de recuit (690 °C), ainsi qu'un fort flux de sélénium (Ф(Se) = 0,5 Å.s⁻¹ ; Ф(Se)/Ф(Pt) ~ 170), permettent d'obtenir une haute qualité cristalline et une haute conductivité électrique. L'impact du recuit post-croissance sur les propriétés structurelles des films épais est particulièrement étudié par diffraction des rayons X (XRD) et microscopie électronique à transmission (STEM). Les films de PtSe₂ non recuits consistent en une distribution 3D de domaines superposés ayant différentes orientations dans le plan, tandis que les films recuits consistent en un réseau 2D de domaines monocristallins selon l'axe c. En d'autres termes, les films non recuits ont des domaines d'épaisseur plus faible que celle du film et sont constitués de phases semi-conductrices et semi-métalliques, entraînant une faible conductivité (0,5 mS). Au contraire, les films recuits sont composés uniquement de domaines quasi-monocristallins et semi-métalliques, et présentent une très haute conductivité, jusqu'à 1,6 mS. On montre également que l'indicateur de qualité cristalline couramment utilisé, qui est la largeur à mi-hauteur (FWHM) du pic Raman Eg, n'est valide que s'il est étudié conjointement avec la FWHM du pic Raman A1g. On démontre que plus la FWHM des pics Eg et A1g est faible, plus la qualité cristalline des films de PtSe₂ dans le plan et hors du plan, respectivement, est élevée, et plus la conductivité électrique augmente. Concernant les films bicouches de PtSe₂ semi-conducteur, on obtient des films de haute qualité cristalline, dont la FWHM des pics Eg et A1g est comparable à celle des cristaux exfoliés, en effectuant une synthèse avec un flux périodique de Pt (periodic supply epitaxy). Les films de PtSe₂ bicouches à multicouches ne sont pas monocristallins mais présentent une texture de fibre selon l'axe c, ce qui est typique sur un substrat de saphir. On démontre pour la première fois l'épitaxie d'un film épais de PtSe₂ sur des surfaces vicinales (marches) de saphir. Pour finir, nous avons fabriqué des dispositifs optoélectroniques fonctionnant à 1,55 µm, la longueur d'onde typique des télécommunications par fibre optique. Ils sont à base de PtSe₂ épais semi-métallique, présentant une haute conductivité électrique et une bonne absorption optique à 1,55 µm, qui est directement synthétisé sur un substrat de saphir 2 pouces. On montre des photodétecteurs à base de PtSe₂ avec une largeur de bande record de 60 GHz et le premier mélangeur optoélectronique à base d'un TMD présentant, de plus, une largeur de bande supérieure à 30 GHz
PtSe₂ is a 2D material from the transition metal dichalcogenide (TMD) family that exhibits outstanding intrinsic properties: high charge carrier mobility (200 - 450 cm².(V.s)⁻¹), tunable bandgap with the number of monolayers (MLs), broadband optical absorption and excellent air stability. These properties are ideally suited for (opto)electronic applications. However, the growth of high crystalline quality PtSe₂ on low-cost and insulating substrates remains a major challenge. Here, the synthesis of bilayer to multilayer PtSe₂ films (< 20 MLs) by molecular beam epitaxy (MBE) is optimized on a sapphire substrate. The systematic characterizations include electron diffraction (RHEED), Raman spectroscopy, energy dispersive X-ray spectroscopy (EDX) and electrical conductivity measurements. For thick semimetallic PtSe₂ films, we demonstrate that high growth (520°C) and annealing (690°C) temperatures, combined with a high selenium flux (Ф(Se) = 0.5 Å.s⁻¹; Ф(Se)/Ф(Pt) ~ 170), leads to high crystalline quality and high electrical conductivity. In particular, the effect of the post-growth annealing on the structural properties of the thick films is investigated using X-ray diffraction (XRD) and transmission electron microscopy (STEM). We show that non-annealed PtSe₂ films consist of a 3D random distribution of superimposed domains with different in-plane orientations, while the annealed films consist of a 2D network of single-crystalline domains along the c-axis. In other words, non-annealed films have domains with a thickness smaller than that of the film and are composed of both semiconducting and semimetallic phases, resulting in low electrical conductivity (0.5 mS). In contrast, the annealed films are composed solely of quasi-single-crystalline and semimetallic domains, and exhibit high conductivity, up to 1.6 mS. We also show that the commonly used crystalline quality indicator, which is the full width at half maximum (FWHM) of the Eg Raman peak, becomes a reliable metric only when it is studied in conjunction with the FWHM of the A1g Raman peak. We demonstrate that the lower the FWHM of both the Eg and A1g peaks, the higher the crystalline quality of the in-plane and out-of-plane PtSe₂ films, respectively, and the higher the electrical conductivity. For semiconducting PtSe₂ bilayer films, high crystalline quality films with Eg and A1g FWHM values comparable to those of exfoliated crystals are obtained using a periodic Pt flux (periodic supply epitaxy). The bilayer to multilayer PtSe₂ films are not monocrystalline but present a fiber texture along the c-axis, which is typical on a sapphire substrate. The epitaxy of a thick PtSe₂ film on vicinal sapphire surfaces (steps) is demonstrated for the first time. Finally, we fabricated optoelectronic devices operating at 1.55 µm, the typical wavelength of optical fiber telecommunications. They are based on thick semi-metallic PtSe₂, exhibiting high electrical conductivity and good optical absorption at 1.55 µm, which is directly synthesized on a 2-inch sapphire substrate. We demonstrate PtSe₂-based photodetectors with a record bandwidth of 60 GHz and the first TMD-based optoelectronic mixer with, in addition, a bandwidth larger than 30 GHz

Style APA, Harvard, Vancouver, ISO itp.

Dawei, Jiang. "Electrical and optical characterization of InP nanowire-based photodetectors". Thesis, Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25733.

Pełny tekst źródła

Streszczenie:

This thesis deals with electrical and optical characterization of p+i–n+ nanowire-based photodetectors/solar cells. I have investigated their I-V performance and found that all of them exhibit a clear rectifying behavior with an ideality factor around 2.2 at 300K. used Fourier transform infrared spectroscopy to extract their optical properties. From the spectrally resolved photocurrent data, I conclude that the main photocurrent is generated in the i-segment of the nanowire (NW) p-i-n junctions, with negligible contribution from the substrate. I also used a C-V technique to investigate the impurity/doping profiles of the NW p+-i-n+ junction. The technique has been widely used for investigations of doping profiles in planar p-n junctions, in particular with one terminal (n or p) highly doped. To verify the accuracy of the technique, I also used a planar Schottky sample with an already known doping profile for a test experiment. The result is very similar to the actual data. When we used the technique to investigate the doping level in the NWs photodetectors grown on InP substrates, the results show a very high capacitance above 800pF which most likely is due to the influence of the parasitic capacitance from the insulating layer of SiO2. Thus, a new sample design is required to investigate the doping profiles of NWs.

Style APA, Harvard, Vancouver, ISO itp.

Liu, Yining. "Design of an Optical Response System for Characterization of Hyperoped Silicon Photodetectors". University of Dayton / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1461944376.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Giovane, Laura Marie. "Strain-balanced silicon-germanium materials for near IR photodetection in silicon-based optical interconnects". Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9583.

Pełny tekst źródła

Streszczenie:

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1998.
Includes bibliographical references (leaves 129-132).
Strain-balanced silicon-germanium superlattices grown on high quality compositionally graded buffers, or virtual substrates. make a complete range of alloy composition and biaxial strain combinations accessible. This structure is a unique way to achieve high quantum efficiency near IR photodetection for silicon-based optical interconnects. The growth of the strain-balanced superlattices by molecular beam epitaxy (MBE) and ultra high vacuum chemical vapor deposition (UHV-CVD) is presented and the role of adsorbed hydrogen during UHV-CVD growth is addressed. Hydrogen adsorption 0,1 the growth surface proved a useful technique to minimize coherent strain relaxation at the higher growth temperatures required for UHV-CVD silicon-germanium growth. The near IR absorption spectrum of the strained silicon-germanium materials possible using strain-balanced superlattices is critically required in the design of a photodetector. A model based on deformation potential theory and semiconductor absorption physics is used to predict the absorption coefficient as a function of strain and alloy composition. Photocurrent junction spectroscopy of strain-balanced silicongermanium materials is used to confirm the results of the model. The effects of threading dislocations associated with the compositionally graded buffers on the bulk leakage current of photodiodes is determined using electron-beam induced current imaging techniques to measure dislocation density. The correlation between dislocation density and leakage current yielded a current per dislocation line length of 200 pA [mu]m·1. Coupling strategies for the integration of high dielectric contrast polycrystalline silicon/ Si02 strip waveguides and silicon-germanium photodetectors are presented. The high optical power densities possible with the polycrystalline silicon waveguides permits the miniaturization of photodetectors. The effects of integration and miniaturization on photodetector performance are discussed.
by Laura Marie Giovane.
Ph.D.

Style APA, Harvard, Vancouver, ISO itp.

Ahmed, Rizwan, i Shahid Abbas. "Electrical and Optical Characteristics of InP Nanowires based p-i-n Photodetectors". Thesis, Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-13915.

Pełny tekst źródła

Streszczenie:

Photodetectors are a kind of semiconductor devices that convert incoming light to an electrical signal. Photodetectors are classified based on their different structure, fabrication technology, applications and different sensitivity. Infrared photodetectors are widely used in many applications such as night vision, thermal cameras, remote temperature sensing, and medical diagnosis etc. All detectors have material inside that is sensitive to incoming light. It will absorb the photons and, if the incoming photons have enough energy, electrons will be excited to higher energy levels and if these electrons are free to move, under the effect of an external electric field, a photocurrent is generated. In this project Fourier Transform Infrared (FT-IR) Spectroscopy is used to investigate a new kind of photodiodes that are based on self-assembled semiconductor nanowires (NWs) which are grown directly on the substrate without any epi-layer. The spectrally resolved photocurrent (at different applied biases) and IV curves (in darkness and illumination) for different temperatures have been studied respectively. Polarization effects (at low and high Temperatures) have been investigated. The experiments are conducted for different samples with high concentration of NWs as well as with lower concentration of NWs in the temperature range from 78 K (-195ºC) to 300 (27ºC). These photodiodes are designed to work in near infrared (NIR) spectral range. The results show that the NW photodetectors indeed are promising devices with fairly high break down voltage, change of photocurrent spectra with polarized light, low and constant reverse saturation current (Is). The impact of different polarized light on photocurrent spectra has been investigated and an attempt has been made to clarify the observed double peak of InP photocurrent spectrum. Our investigations also include a comparison to a conventional planar InP p-i-n photodetector.

Style APA, Harvard, Vancouver, ISO itp.

Yew, Jone-Ye, i 游宗毅. "Fabrication of Amorphous Silicon Germanium Near IR Photodetector". Thesis, 1997. http://ndltd.ncl.edu.tw/handle/36750805553945830401.

Pełny tekst źródła

Streszczenie:

碩士
國立清華大學
電機工程學系
85
The purpose of this thesis is to fabricate a-SiGe:H IR detectors. Two mainefforts of this thesis are (1)fabrication of a-SiGe:H films. (2)NIPIN IR photodetectors. In order to reduce the influence of the particulate formation in thepreparation of a-SiGe:H films, high hydrogen dilution ratio which is about93 % and pulse RF power is used for a-SiGe:H films. The particulate formationis decreased by using pulse RF power. The device structure of a-SiGe:H photo detector is NIPIN barrier type phototransistor. The I layer which light is first incident is the visible lightabsorption region and the other is the IR light absorption region.The photo to dark current ratios of this device under 780 nm LED illumination is over 100 and the photocurrent is over 1 uA which is enough for the requirement for the circuit design.

Style APA, Harvard, Vancouver, ISO itp.

Lin, Chung-Yi, i 林忠億. "Investigation of ZnSe/Si Metal-Semiconductor-Metal (MSM) Photodetector Using IR Furnace Chemical Vapor Deposition". Thesis, 1999. http://ndltd.ncl.edu.tw/handle/29772847564015235938.

Pełny tekst źródła

Streszczenie:

碩士
國立海洋大學
電機工程學系
87
-Abstract- In this experiment, we use the low cost IR-CVD system and two-step growth method to grow ZnSe epilayers on oriented-(111) Si substrate for reducing the lattice mismatch problem between ZnSe and Si. Because of the existence of the lattice constant mismatch within approximately 4.1% between the ZnSe and Si that can introduce high density of threading dislocations, stacking faults and defects resulting in the interface states. We use the optimum ZnSe epilayers on Si to fabricate the devices of MSM photodetector. Further, we have shown that planar metal-semiconductor-metal photodetectors on ZnSe/Si are promising candidates for optoelectronic integration of short-wavelength components. We report the Au-ZnSe/Si MSM photodetector without any passivation and antireflection coating exhibits the photo-responsivity are 5.21A/W at 470nm light wavelength, 4.77A/W at 500nm light wavelength and 1.64A/W at 650nm light wavelength at 10V bias. In addition, we obtained the strongest photo-responsivity in the wavelength of 470nm. The results demonstrate the studying ZnSe/Si MSM photodetector will be suitable for the applications of the short wavelength photo-detectors. We can measurement yielded an FWHM of 25ns for a bias voltage of 10V. Moreover, we estimated a bandwidth of about 22 MHz. The conventional liner interdigitated electrode MSM and the 2D grid of the alternative approach pattern were been fabricated. Therefore, we obtained larger photo-responsivity for TM polarisation than TE polarisation result of the grating effect. The orthogonal directions with interdigitated fingers of polarisation refer to light polarised parallel (TE) result to the centre stem reflect by the metal grating. Thus, the convention and 2D grid of the alternative approach pattern MSM photodetectors depend on the angle of polarised that is polarisation-sensitivity. There is virtually no obviously difference in the response behavior between the conventional linear electrode and 2D grid of the alternative approach detectors. We can obvious the thickness absorption layer increase and the MSM photo-responsivity increase. This is because the thicker absorption layer will generate more photo carrier in the deep absorption layer due to a larger number EHPs can pass through the absorption layer and arrive to the electrode. Therefore, the MSM photodetector photo-responsivity depends on the thickness of the absorption layer. Nevertheless, the photo-responsivity of dependence on wavelength decrease with the absorption layers thickness increase. Because more light passes through the absorption layer into the substrate is due to the thinner absorption layer and result in lower spectral response in the blue-green range. A thinner ZnSe layer enables to eliminate the longer carrier paths that loop down into the absorption material. Although, decrease the absorption layer will increase the impulse response time which depend on bandwidth but will result to photo-reponsivity decrease. Therefore, the performance of the requirement determines to the absorption layer thickness. We report the Au-ZnSe/Si MSM photodetector without any passivation and antireflection coating and we obtain the high performance of photo-responsivity. It is evident that the absorption area increase and the photocurrent were created increase. And when the absorption areas decrease that the photo-responsivity is exponential decay. In addition, the impulse response time as a function of the interdigital spacing width was measured with bias of 10V. The FWHM is dependent on the spacing width and carrier velocity limited the transit time. Then the bandwidth of the Au-ZnSe/Si MSM photodetector was obtained versus spacing gap relation is based on a fit to experimental results. In addition, we employed the low cost CVD system and Si as the substrate due to the advantages such as high thermal conductivity, large-area, low-cost wafers and mechanical hardness. Those made us easier to achieved low cost short wavelength blue light opto-electronic devices and more useful for the applications of the opto-electronic integrated circuit (OEIC).

Style APA, Harvard, Vancouver, ISO itp.

Huang, Shao-Chang, i 黃紹璋. "A study of Amorphous Silicon Germanium High Speed IR Photodetector fabricated on crystal Si Substrate". Thesis, 1996. http://ndltd.ncl.edu.tw/handle/70649342380411960816.

Pełny tekst źródła

Streszczenie:

碩士
國立成功大學
電機工程研究所
84
In this thesis , the amorphous silicon-germanium / crystal silicon heterojunction high-speed IR photodetector was studied in detail. In preparing the samples , the amorphous silicon- germanium alloys were grown on the crystal silicon subtrate by plasma enhanced chemical vapor deposition (PECVD). Both advantages of the low resistivity and high mobility characteristics of crystal silicon and the low temperature preparation processing,high optical absorption ,large area device feasibility and low cost of amorphous silicon are employed to prepare the heterojunction structure photodetector for faster response speed and lower cost. Compared with the traditoinal amorphous silicon germanium structure,the device with the structure of Al/n-a-Si:H/i-a- Si0.6 Ge0.4:H/p-c-Si has the following advantages: 1.The absorption wavelength peak moves to a higher value(865 nm ) than that 710 nm of the traditional amorphous silicon germanium structure. 2.The device has a faster response speed ( with a rise time of 195μs ) than that ( with a rise time of 465μs ) of the traditional amorphous silicon germanium structure . 3.The dark current has been decreased to a lower value (3.3μA under a reverse bias of 5V ) than that ( 50μA under the same bias)of the amorphous silicon germanium structure.

Style APA, Harvard, Vancouver, ISO itp.

Tsai, Chung-Shih, i 蔡崇世. "A Study of the High Optical Gain Amorphous Silicon Germanium Alloy IR Photodetector with Bragg Reflectors". Thesis, 1995. http://ndltd.ncl.edu.tw/handle/83112415266720618917.

Pełny tekst źródła

Streszczenie:

碩士
國立成功大學
電機工程研究所
83
In this thesis, an high optical gain amorphous silicon germanium alloy IR photodetector with Bragg reflectors has been developed by plasma enhanced chemical vaporphase deposition( PECVD). By using Bragg reflectors ,we can reabsorb the unabsorbed light to increase absorption efficiency , thus we can increase the optical gain. In addition, the Bragg reflector structure will serve as a barrier to block the outdiffusion of defects from the substrate into the active region of the detector which contributes to lower dark current. Therefore, under the same dark current condition, the PIN photodetector with Bragg reflectors can be operated with large voltage bias to increase the avalanche multiplication which will contribute higher optical gain. Based on experiment results, we find that the photodetector with Bragg reflectors has better characteristis than the conventional photodetector The full width of half magnitude(FWHM) can be reduced from 250nm to 150nm .The optical gain under 25uA can be attained as high as 328 with an incident light power of 1uW . Additionally,the rise time of this device is increased from 750us to 942.5us .

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "IR photodetector"

AG, Siemens. Si photodetectors and IR emitters data book 1994/95. München: Siemens AG, 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "IR photodetector"

Piotrowski, J., i A. Piotrowski. "Room Temperature IR Photodetectors". W Mercury Cadmium Telluride, 513–37. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470669464.ch22.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kutepov, M. E., T. A. Minasyan, D. A. Zhilin, V. E. Kaydashev, G. Y. Karapetyan, K. G. Abdulvakhidov, S. I. Shevtsova i E. M. Kaidashev. "Fabrication and Investigation of InSb Thin Films for IR SAW Photodetectors". W Springer Proceedings in Materials, 183–90. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45120-2_16.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sood, Ashok K., John W. Zeller, Roger E. Welser, Yash R. Puri, Nibir K. Dhar, Priyalal S. Wijewarnasuriya i Sanjay Krishna. "Design and Development of Two-Dimensional Strained Layer Superlattice (SLS) Detector Arrays for IR Applications". W Two-dimensional Materials for Photodetector. InTech, 2018. http://dx.doi.org/10.5772/intechopen.71328.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Perera, A. G. U. "Homo- and Heterojunction Interfacial Workfunction Internal Photo-Emission Detectors from UV to IR". W Advances in Infrared Photodetectors, 243–302. Elsevier, 2011. http://dx.doi.org/10.1016/b978-0-12-381337-4.00005-x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Starikov*, D., C. Boney, R. Pillai i A. Bensaoula. "Solar-Blind Dual-Band UV/IR Photodetectors Integrated on a Single Chip". W 2007 Cleantech Conference and Trade Show Cleantech 2007, 126–29. CRC Press, 2019. http://dx.doi.org/10.1201/9780429187469-33.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "IR photodetector"

Su, Zih-Chun, Yao-Han Dong i Ching-Fuh Lin. "The Enhanced mid-IR Responsivity and The Hot Carrier Dynamics in Metal-Silicon Interface". W CLEO: Applications and Technology, JTh2A.51. Washington, D.C.: Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_at.2024.jth2a.51.

Pełny tekst źródła

Streszczenie:

In this work, we achieved a high-speed (< 10-6 s) and broad-spectrum silicon-based photodetector covering visible to mid-infrared light by enhancing the hot carrier mechanism through localized surface plasmon resonance in nano scaled metal.

Style APA, Harvard, Vancouver, ISO itp.

Slapovskaya, Ekaterina, Leonid Mochalov, Mikhail Kudryashov i Edik Rafailov. "CVD-prepared PbSe films for mid-IR photodetectors with high detectivity". W 2024 24th International Conference on Transparent Optical Networks (ICTON), 1–4. IEEE, 2024. http://dx.doi.org/10.1109/icton62926.2024.10648010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Edelstein, Shahar, S. R. K. Chaitanya Indukuri, Noa Mazurski i Uriel Levy. "Waveguide-Coupled Mid-IR Photodetector Based on Interlayer Excitons Absorption in a WS2/HfS2 Heterostructure". W CLEO: Science and Innovations. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/cleo_si.2022.sm3k.8.

Pełny tekst źródła

Streszczenie:

We demonstrate a waveguide-coupled mid-IR photodetector based on interlayer excitons in a WS2/HfS2 heterostructure. We measure broadband photodetection, with responsivity in the order of tens of µA/W with low losses to the waveguide mode.

Style APA, Harvard, Vancouver, ISO itp.

Lepikh, Ya I., I. A. Ivanchenko, L. M. Budijanskaja i V. I. Santonij. "Heterojunction photodetector of IR-radiation". W 2017 International Conference on Information and Telecommunication Technologies and Radio Electronics (UkrMiCo). IEEE, 2017. http://dx.doi.org/10.1109/ukrmico.2017.8095391.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Djuric, Zoran G., i Jozef Piotrowski. "Electromagnetically carrier depleted IR photodetector". W San Diego, '91, San Diego, CA, redaktorzy Bjorn F. Andresen, Marija Scholl i Irving J. Spiro. SPIE, 1991. http://dx.doi.org/10.1117/12.48766.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Biswal, Gyana R., Michael Yakimov, Vadim Tokranov, Kimberly A. Sablon, Sergey Tulyakov, Vladimir Mitin i Serge Oktyabrsky. "Development of voltage-tunable IR photodetector". W Infrared Sensors, Devices, and Applications XIII, redaktorzy Ashok K. Sood, Priyalal Wijewarnasuriya i Arvind I. D'Souza. SPIE, 2023. http://dx.doi.org/10.1117/12.2677169.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Karachevtseva, Lyudmila A., i Alexei V. Lyubchenko. "Thermostimulate optimization of CdHgTe IR-photodetector parameters". W International Conference on Optical Diagnostics of Materials and Devices for Opto-, Micro-, and Quantum Electronics, redaktorzy Sergey V. Svechnikov i Mikhail Y. Valakh. SPIE, 1995. http://dx.doi.org/10.1117/12.226137.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bishnu, Soham Kanti, Sayantika Chowdhury, Pritam Sarkar, Sanaita Khan, Madhurima Paul, Anamitral Gupta, Puijita Roy, Shayani Samanta i Nibedita Maity. "Heart Rate Monitoring system using IR-photodetector sensor". W 2018 IEEE 9th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON). IEEE, 2018. http://dx.doi.org/10.1109/iemcon.2018.8614884.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rostami, A., S. Khosravi i H. Rasooli Saghai. "A Dual-Band UV and IR Quantum Cascade Photodetector". W Asia Communications and Photonics Conference and Exhibition. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/acp.2011.830816.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rostami, A., S. Khosravi i H. Rasooli Saghai. "A dual-band UV and IR quantum cascade photodetector". W SPIE/OSA/IEEE Asia Communications and Photonics, redaktor Guang-Hua Duan. SPIE, 2011. http://dx.doi.org/10.1117/12.904399.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "IR photodetector"

Pezzaniti, Larry, Sanjay Krishna i Payman Zarkesh-Ha. Quantum DOT IR Photodetectors. Fort Belvoir, VA: Defense Technical Information Center, lipiec 2012. http://dx.doi.org/10.21236/ada580397.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yang, Rui Q. Low Noise Mid-Wavelength IR Photodetectors. Fort Belvoir, VA: Defense Technical Information Center, luty 2014. http://dx.doi.org/10.21236/ada596425.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Smith, David J., i Yong-Hang Zhang. Novel Virtual Substrates for Future Generation IR Photodetectors. Fort Belvoir, VA: Defense Technical Information Center, grudzień 2014. http://dx.doi.org/10.21236/ada613845.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Yong-Hang. Electrical and Optical Characterization System for IR Photodetectors. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2015. http://dx.doi.org/10.21236/ad1014947.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Yong-Hang. Multicolor (UV-IR) Photodetectors Based on Lattice-Matched 6.1 A II/VI and III/V Semiconductors. Fort Belvoir, VA: Defense Technical Information Center, sierpień 2015. http://dx.doi.org/10.21236/ada622826.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!