Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: InxGa1-xN.

Artykuły w czasopismach na temat „InxGa1-xN”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „InxGa1-xN”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Jeong, Myoungho, Hyo Sung Lee, Seok Kyu Han, Eun-Jung-Shin, Soon-Ku Hong, Jeong Yong Lee, Yun Chang Park, Jun-Mo Yang i Takafumi Yao. "Microstructural Characterization of High Indium-Composition InXGa1−XN Epilayers Grown on c-Plane Sapphire Substrates". Microscopy and Microanalysis 19, S5 (sierpień 2013): 145–48. http://dx.doi.org/10.1017/s143192761301252x.

Pełny tekst źródła
Streszczenie:
AbstractThe growth of high-quality indium (In)-rich InXGa1−XN alloys is technologically important for applications to attain highly efficient green light-emitting diodes and solar cells. However, phase separation and composition modulation in In-rich InXGa1−XN alloys are inevitable phenomena that degrade the crystal quality of In-rich InXGa1−XN layers. Composition modulations were observed in the In-rich InXGa1−XN layers with various In compositions. The In composition modulation in the InXGa1−XN alloys formed in samples with In compositions exceeding 47%. The misfit strain between the InGaN layer and the GaN buffer retarded the composition modulation, which resulted in the formation of modulated regions 100 nm above the In0.67Ga0.33N/GaN interface. The composition modulations were formed on the specific crystallographic planes of both the {0001} and {0114} planes of InGaN.
Style APA, Harvard, Vancouver, ISO itp.
2

Manzoor, Habib Ullah, Aik Kwan Tan, Sha Shiong Ng i Zainuriah Hassan. "Carrier Density and Thickness Optimization of InxGa1-xN Layer by Scaps-1D Simulation for High Efficiency III-V Solar CelL". Sains Malaysiana 51, nr 5 (31.05.2022): 1567–76. http://dx.doi.org/10.17576/jsm-2022-5105-24.

Pełny tekst źródła
Streszczenie:
In this study, the indium gallium nitride (InxGa1-xN) p-n junction solar cells were optimized to achieve the highest conversion efficiency. The InxGa1-xN p-n junction solar cells with the whole indium mole fraction (0 £ x £ 1) were simulated using SCAPS-1D software. Optimization of the p- and n-InxGa1-xN layer's thickness and carrier density were also carried out. The thickness and carrier density of each layer was varied from 0.01 to 1.50 µm and 1015 to 1020 cm-3. The simulation results showed that the highest conversion efficiency of 23.11% was achieved with x = 0.6. The thickness (carrier density) of the p- and n-layers for this In0.6Ga0.4N p-n junction solar cell are 0.01 (1020) and 1.50 μm (1019 cm-3), respectively. Simulation results also showed that the conversion efficiency is more sensitive to the variations of layer's thickness and carrier density of the top p-InxGa1-xN layer than the bottom n-InxGa1-xN layer. Besides that, the results also demonstrated that thinner p-InxGa1-xN layer with higher carrier density offers better conversion efficiency.
Style APA, Harvard, Vancouver, ISO itp.
3

Song, Juan, Zijiang Luo, Xuefei Liu, Ershi Li, Chong Jiang, Zechen Huang, Jiawei Li, Xiang Guo, Zhao Ding i Jihong Wang. "The Study on Structural and Photoelectric Properties of Zincblende InGaN via First Principles Calculation". Crystals 10, nr 12 (19.12.2020): 1159. http://dx.doi.org/10.3390/cryst10121159.

Pełny tekst źródła
Streszczenie:
In this paper, the structure and photoelectric characteristics of zincblende InxGa1−xN alloys are systematically calculated and analyzed based on the density functional theory, including the lattice constant, band structure, distribution of electronic states, dielectric function, and absorption coefficient. The calculation results show that with the increase in x, the lattice constants and the supercell volume increase, whereas the bandgap tends to decrease, and InxGa1−xN alloys are direct band gap semiconductor materials. In addition, the imaginary part of the dielectric function and the absorption coefficient are found to redshift with the increase in indium composition, expanding the absorption range of visible light. By analyzing the lattice constants, polarization characteristics, and photoelectric properties of the InxGa1−xN systems, it is observed that zincblende InxGa1−xN can be used as an alternative material to replace the channel layer of wurtzite InxGa1−xN heterojunction high electron mobility transistor (HEMT) devices to achieve the manufacture of HEMT devices with higher power and higher frequency. In addition, it also provides a theoretical reference for the practical application of InxGa1−xN systems in optoelectronic devices.
Style APA, Harvard, Vancouver, ISO itp.
4

Lin, Yu-Chung, Ikai Lo, Cheng-Da Tsai, Ying-Chieh Wang, Hui-Chun Huang, Chu-An Li, Mitch M. C. Chou i Ting-Chang Chang. "Optimization of Ternary InxGa1-xN Quantum Wells on GaN Microdisks for Full-Color GaN Micro-LEDs". Nanomaterials 13, nr 13 (23.06.2023): 1922. http://dx.doi.org/10.3390/nano13131922.

Pełny tekst źródła
Streszczenie:
Red, green, and blue light InxGa1−xN multiple quantum wells have been grown on GaN/γ-LiAlO2 microdisk substrates by plasma-assisted molecular beam epitaxy. We established a mechanism to optimize the self-assembly growth with ball-stick model for InxGa1-xN multiple quantum well microdisks by bottom-up nanotechnology. We showed that three different red, green, and blue lighting micro-LEDs can be made of one single material (InxGa1-xN) solely by tuning the indium content. We also demonstrated that one can fabricate a beautiful InxGa1-xN-QW microdisk by choosing an appropriate buffer layer for optoelectronic applications.
Style APA, Harvard, Vancouver, ISO itp.
5

Han, Li Jun, Bin Feng Ding i Guo Man Lin. "The Optical and Structural Properties of InxGa1-XN/GaN Multiple Quantum Wells by Metal Organic Chemical Vapor Deposition". Advanced Materials Research 535-537 (czerwiec 2012): 1270–74. http://dx.doi.org/10.4028/www.scientific.net/amr.535-537.1270.

Pełny tekst źródła
Streszczenie:
The structural and optical properties of InxGa1-xN/GaN multi-quantum wells (MQWs) grown on sapphire are discussed. Two kinds of InxGa1-xN/GaN MQWs with same period and different single cycle thickness and different growth temperature of MQWs are selected. Firstly, from the result of SRXRD and RBS/C, we can estimate that indium content of InxGa1-xN /GaN MQWs is 0.033 and 0.056, the single cycle thickness of MQWs is 13.04nm and 15.86nm respectively. Secondly the PL results indicate the optical properties of InxGa1-xN/GaN MQWs. Finally, we find indium content decreasing with increasing growth temperature of MQWs and the emission intensity reducing with temperature increasing, the emission optical peak position versus temperature show the “S-shaped” character. All these experimental results testify the material design of InxGa1-xN/GaN MQWs will have potential applications in spectral LED.
Style APA, Harvard, Vancouver, ISO itp.
6

Wu, Ren Tu Ya, i Qi Zhao Feng. "Polaronic Effects in Wurtzite InxGa1-xN/GaN Parabolic Quantum Well". Advanced Materials Research 629 (grudzień 2012): 145–51. http://dx.doi.org/10.4028/www.scientific.net/amr.629.145.

Pełny tekst źródła
Streszczenie:
The energy levels of polaron in a wurtzite InxGa1-xN/GaN parabolic quantum well are investigated by adopting a modified Lee-Low-Pines variational method. The ground state energy, the transition energy and the contributions of different branches of optical phonon modes to the ground state energy as functions of the well width are given. The effects of the anisotropy of optical phonon modes and the spatial dependence effective mass, dielectric constant, phonon frequency on energy levels are considered in calculation. In order to compare, the corresponding results in zinc-blende parabolic quantum well are given. The results indicate that the contributions of the electron-optical phonon interaction to ground state energy of polaron in InxGa1-xN/GaN is very large, and make the energy of polaron reduces. For a narrower quantum well,the contributions of half-space optical phonon modes is large , while for a wider one, the contributions of the confined optical phonon modes are larger. The ground state energy and the transition energy of polaron in wurtzite InxGa1-xN/GaN are smaller than that of zinc-blende InxGa1-xN/GaN, and the contributions of the electron-optical phonon interaction to ground state energy of polaron in wurtzite InxGa1-xN/GaN are greater than that of zinc-blende InxGa1-xN/GaN. The contributions of the electron-optical phonon interaction to ground state energy of polaron in wurtzite InxGa1-xN/GaN (about from 22 to 32 meV) are greater than that of GaAs/AlxGa1-xAs parabolic quantum well (about from 1.8 to 3.2 meV). Therefore, the electron-optical phonon interaction should be considered for studying electron state in InxGa1-xN/GaN parabolic quantum well.
Style APA, Harvard, Vancouver, ISO itp.
7

Kaysir, Md Rejvi, i Rafiqul Islam. "Theoretical Charge Control Investigations in InN-Based Quantum Well Double Heterostructure High Electron Mobility Transistors (QW-DHEMTs)". Advanced Materials Research 403-408 (listopad 2011): 52–58. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.52.

Pełny tekst źródła
Streszczenie:
In this paper, charge control mechanism and carrier features have been precisely investigated in InxGa1-xN/InN/InxGa1-xN based quantum-well double heterostructure high electron mobility transistors (QW-DHEMTs). A study of charge control in the InxGa1-xN/InN/InxGa1-xN structure is performed by self-consistently solving Schrödinger equation in conjunction with Poisson’s equation taking into account the spontaneous and piezoelectric polarization effects. The potential profile and the distribution of electron density in the channel as a function of gate voltage are investigated here. A large conduction band offset of about 2.2eV is obtained for the proposed device for In content x=0.05, which ensure better carrier confinement and higher sheet charge density. The influence of In composition(x) and doping concentration of InxGa1-xN upper barrier on sheet charge density and carrier distributions in channel is also presented. This analysis provides a platform to investigate the InN based QW-DHEMTs and to optimized their design.
Style APA, Harvard, Vancouver, ISO itp.
8

Tsai, ChengDa, Ikai Lo, YingChieh Wang, ChenChi Yang, HongYi Yang, HueiJyun Shih, HuiChun Huang, Mitch M. C. Chou, Louie Huang i Binson Tseng. "Indium-Incorporation with InxGa1-xN Layers on GaN-Microdisks by Plasma-Assisted Molecular Beam Epitaxy". Crystals 9, nr 6 (14.06.2019): 308. http://dx.doi.org/10.3390/cryst9060308.

Pełny tekst źródła
Streszczenie:
Indium-incorporation with InxGa1-xN layers on GaN-microdisks has been systematically studied against growth parameters by plasma-assisted molecular beam epitaxy. The indium content (x) of InxGa1-xN layer increased to 44.2% with an In/(In + Ga) flux ratio of up to 0.6 for a growth temperature of 620 °C, and quickly dropped with a flux ratio of 0.8. At a fixed In/(In + Ga) flux ratio of 0.6, we found that the indium content decreased as the growth temperature increased from 600 °C to 720 °C and dropped to zero at 780 °C. By adjusting the growth parameters, we demonstrated an appropriate InxGa1-xN layer as a buffer to grow high-indium-content InxGa1-xN/GaN microdisk quantum wells for micro-LED applications.
Style APA, Harvard, Vancouver, ISO itp.
9

Humayun, M. A., M. A. Rashid, F. Malek, A. Yusof, F. S. Abdullah i N. B. Ahmad. "A Comparative Study of Confined Carrier Concentration of Laser Using Quantum well and Quantum Dot in Active Layer". Advanced Materials Research 701 (maj 2013): 188–91. http://dx.doi.org/10.4028/www.scientific.net/amr.701.188.

Pełny tekst źródła
Streszczenie:
This paper presents a comparative analysis of some of the important characteristics of the carriers of quantum well and quantum dot based laser. Among the characteristics of the carriers, confined carrier concentrations in the gain medium as well as the carrier concentrations at the threshold have been studied extensively by using InxGa1-xN based quantum well and InxGa1-xN based quantum dot in the active layer of the laser structure. The numerical results obtained are compared to investigate the superiority of the quantum dot over quantum well. It is ascertained from the comparison results that InxGa1-xN based quantum dot provides higher density of confined carrier and lower level of carrier concentration required for lasing action. This paper reports the enhancement of confined carrier density and minimization of carrier concentration at threshold of laser using InxGa1-xN based quantum dot as the active layer material. Hence, it is revealed that better performances of lasers have been obtained using InxGa1-xN based quantum dot than that of quantum well in the active medium of the device structure.
Style APA, Harvard, Vancouver, ISO itp.
10

Hu, Yan-Ling, Yuqin Zhu, Huayu Ji, Qingyuan Luo, Ao Fu, Xin Wang, Guiyan Xu i in. "Fabrication of InxGa1−xN Nanowires on Tantalum Substrates by Vapor-Liquid-Solid Chemical Vapor Deposition". Nanomaterials 8, nr 12 (29.11.2018): 990. http://dx.doi.org/10.3390/nano8120990.

Pełny tekst źródła
Streszczenie:
InxGa1−xN nanowires (NWs) have drawn great attentions for their applications in optoelectronic and energy conversion devices. Compared to conventional substrates, metal substrates can offer InxGa1−xN NW devices with better thermal conductivity, electric conductivity, and mechanic flexibility. In this article, InxGa1−xN NWs were successfully grown on the surface of a tantalum (Ta) substrate via vapor-liquid-solid chemical vapor deposition (VLS-CVD), as characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), scanning and transmission electron microscope (STEM), and photoluminescence spectroscopy (PL). It was found that the surface pretreatment of Ta and the composition of metallic catalysts played important roles in the formation of NWs. A dimpled nitrided Ta surface combined with a catalyst of nickle is suitable for VLS-CVD growth of the NWs. The obtained InxGa1−xN NWs grew along the [1100] direction with the presence of basal stacking faults and an enriched indium composition of ~3 at.%. The successful VLS-CVD preparation of InxGa1−xN nanowires on Ta substrates could pave the way for the large-scale manufacture of optoelectronic devices in a more cost-effective way.
Style APA, Harvard, Vancouver, ISO itp.
11

Shih, Huei-Jyun, Ikai Lo, Ying-Chieh Wang, Cheng-Da Tsai, Yu-Chung Lin, Yi-Ying Lu i Hui-Chun Huang. "Growth and Characterization of GaN/InxGa1−xN/InyAl1−yN Quantum Wells by Plasma-Assisted Molecular Beam Epitaxy". Crystals 12, nr 3 (17.03.2022): 417. http://dx.doi.org/10.3390/cryst12030417.

Pełny tekst źródła
Streszczenie:
The nearly lattice-matched InxGa1−xN/InyAl1−yN epi-layers were grown on a GaN template by plasma-assisted molecular beam epitaxy with a metal modulation technique. The band-gap energy of InxGa1−xN QW in photoluminescence measurement was estimated to be 2.89 eV and the indium concentration (x) was 14.8%. In X-ray photoelectric spectroscopy, we obtained an indium concentration (y) in the InyAl1−yN barrier of 25.9% and the band-offset was estimated to be 4.31 eV. From the atomic layer measurements from high-resolution transmission electron microscopy, the lattice misfit between the InxGa1−xN QW and InyAl1−yN barrier was 0.71%. The lattice-matched InxGa1−xN/InyAl1−yN QWs can therefore be evaluated from the band profiles of III-nitrides for engineering of full-visible-light emitting diode in optoelectronic application.
Style APA, Harvard, Vancouver, ISO itp.
12

Jun, Yong-Ki, i Sang-Jo Chung. "Optical properties of InxGa1-xN/GaN epilayers". Korean Journal of Materials Research 12, nr 1 (1.01.2002): 54–57. http://dx.doi.org/10.3740/mrsk.2002.12.1.054.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

Biswas, Dipankar, Tapas Das, Sanjib Kabi i Subindu Kumar. "Conspicuous Presence of Higher Order Transitions in the Photoluminescence of InxGa1-xN/GaN Quantum Wells". Advanced Materials Research 31 (listopad 2007): 62–64. http://dx.doi.org/10.4028/www.scientific.net/amr.31.62.

Pełny tekst źródła
Streszczenie:
For successive annealing stages the photoluminescence (PL) peaks of InXGa1-XN/GaN quantum wells (QWs) shift initially towards red which is followed by a blue. This phenomenon contradicts the usual monotonic blueshift. We have found that the phenomena can be explained properly only if we consider recombinations from the higher sub-bands to be present in the PL of the InXGa1-XN/GaN QWs, which is not usual. When a strong piezoelectric field exists across a QW, as encountered in InXGa1-XN/GaN QWs, the probability of optical transitions from higher sub-bands of the QW become more probable. In this paper this theory has been established from experimental results.
Style APA, Harvard, Vancouver, ISO itp.
14

B. Kashyout, Fathy, Gad, Badr i A. Bishara. "Synthesis of Nanostructure InxGa1-xN Bulk Alloys and Thin Films for LED Devices". Photonics 6, nr 2 (24.04.2019): 44. http://dx.doi.org/10.3390/photonics6020044.

Pełny tekst źródła
Streszczenie:
In this study, we investigated an innovative method for the fabrication of nanostructure bulk alloys and thin films of indium gallium nitride (InxGa1-xN) as active, thin films for light-emitting diode (LED) devices using both crystal growth and thermal vacuum evaporation techniques, respectively. These methods resulted in some tangible improvements upon the usual techniques of InxGa1-xN systems. A cheap glass substrate was used for the fabrication of the LED devices instead of sapphire. Indium (In) and Gallium (Ga) metals, and ammonia (NH3) were the precursors for the alloy formation. The alloys were prepared at different growth temperatures with compositions ranging from 0.1≤x≤0.9. InxGa1-xN alloys at 0.1≤x≤0.9 had different crystallinities with respect to X-Ray diffraction (XRD) patterns where the energy bandgap that was measured by photoluminescence (PL) fell in the range between 1.3 and 2.5 eV. The bulk alloys were utilized to deposit the thin films onto the glass substrate using thermal vacuum evaporation (TVE). The XRD thin films that were prepared by TVE showed high crystallinity of cubic and hexagonal structures with high homogeneity. Using TVE, the InxGa1-xN phase separation of 0.1≤x≤0.9 was eliminated and highly detected by XRD and FESEM. Also, the Raman spectroscopy confirmed the structure that was detected by XRD. The FESEM showed a variance in the grain size of both alloys and thin films. The InxGa1-xN LED device with the structure of glass/GaN/n-In0.1Ga0.9N:n/In0.1Ga0.9N/p-In0.1Ga0.9N:Mg was checked by the light emitted by electroluminescence (EL). White light generation is a promising new direction for the fabrication of such devices based on InxGa1-xN LED devices with simple and low-cost techniques.
Style APA, Harvard, Vancouver, ISO itp.
15

Vartuli, C. B. "Implant isolation of InxAl1−xN and InxGa1−xN". Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 13, nr 6 (listopad 1995): 2293. http://dx.doi.org/10.1116/1.588065.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Zhao, Xiaofang, Tao Wang, Bowen Sheng, Xiantong Zheng, Li Chen, Haihui Liu, Chao He, Jun Xu, Rui Zhu i Xinqiang Wang. "Cathodoluminescence Spectroscopy in Graded InxGa1−xN". Nanomaterials 12, nr 21 (23.10.2022): 3719. http://dx.doi.org/10.3390/nano12213719.

Pełny tekst źródła
Streszczenie:
InGaN materials are widely used in optoelectronic devices due to their excellent optical properties. Since the emission wavelength of the full-composition-graded InxGa1−xN films perfectly matches the solar spectrum, providing a full-spectrum response, this makes them suitable for the manufacturing of high-efficiency optoelectronic devices. It is extremely important to study the optical properties of materials, but there are very few studies of the luminescence of full-composition-graded InxGa1−xN ternary alloy. In this work, the optical properties of full-composition-graded InxGa1−xN films are studied by cathodoluminescence (CL). The CL spectra with multiple luminescence peaks in the range of 365–1000 nm were acquired in the cross-sectional and plan-view directions. The CL spectroscopy studies were carried out inside and outside of microplates formed under the indium droplets on the InGaN surface, which found that the intensity of the light emission peaks inside and outside of microplates differed significantly. Additionally, the paired defects structure is studied by using the spectroscopic method. A detailed CL spectroscopy study paves the way for the growth and device optimization of high-quality, full-composition-graded InxGa1−xN ternary alloy materials.
Style APA, Harvard, Vancouver, ISO itp.
17

Cho, Hyun, S. M. Donovan, C. R. Abernathy, S. J. Pearton, F. Ren, J. Han i R. J. Shul. "Photoelectrochemical Etching of InxGa1−xN". MRS Internet Journal of Nitride Semiconductor Research 4, S1 (1999): 691–96. http://dx.doi.org/10.1557/s1092578300003264.

Pełny tekst źródła
Streszczenie:
A comparison of KOH, NaOH and AZ400K solutions for UV photo-assisted etching of undoped and n+ GaN is discussed. The etching is diffusion-limited (Ea < 6kCal·mol−1) under all conditions and is significantly faster with bias applied to the sample during light exposure. No etching of InN was observed, due to the very high n-type background doping (> 1020cm−3) in the material.
Style APA, Harvard, Vancouver, ISO itp.
18

Bartel, T. P., P. Specht, J. C. Ho i C. Kisielowski. "Phase separation in InxGa1−xN". Philosophical Magazine 87, nr 13 (maj 2007): 1983–98. http://dx.doi.org/10.1080/14786430601146905.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

Anani, M., H. Abid, Z. Chama, C. Mathieu, A. Sayede i B. Khelifa. "InxGa1−xN refractive index calculations". Microelectronics Journal 38, nr 2 (luty 2007): 262–66. http://dx.doi.org/10.1016/j.mejo.2006.11.001.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
20

Hwang, J. M., J. T. Hsieh, C. Y. Ko, H. L. Hwang i W. H. Hung. "Photoelectrochemical etching of InxGa1−xN". Applied Physics Letters 76, nr 26 (26.06.2000): 3917–19. http://dx.doi.org/10.1063/1.126820.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

Sztein, Alexander, John Haberstroh, John E. Bowers, Steven P. DenBaars i Shuji Nakamura. "Calculated thermoelectric properties of InxGa1−xN, InxAl1−xN, and AlxGa1−xN". Journal of Applied Physics 113, nr 18 (14.05.2013): 183707. http://dx.doi.org/10.1063/1.4804174.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
22

Кукушкин, С. А., i А. В. Осипов. "Термодинамическая стабильность твердых растворов In-=SUB=-x-=/SUB=-Ga-=SUB=-1-x-=/SUB=-N". Письма в журнал технической физики 47, nr 19 (2021): 51. http://dx.doi.org/10.21883/pjtf.2021.19.51516.18879.

Pełny tekst źródła
Streszczenie:
A group-theoretical analysis of solid solutions of indium and gallium nitrides InxGa1-xN was carried out, and all the main symmetry groups were found for these solutions with the initial hexagonal structure. The thermodynamic potentials of the main phases with different compositions x are calculated using the density functional theory. It is shown that for small and large x, i.e. at 0 <x <0.2 and 0.8 <x <1, there is a large number of monoclinic phases Pm and P2_1, which are stable with respect to decomposition into InN and GaN at room temperature. In the range 0.2 <x <0.8, there are only two stable orthorhombic phases Cmc2_1 with compositions x = 1/3 and x = 2/3. All basic geometric and thermodynamic properties of various InxGa1-xN phases have been calculated. It was found that the stability of InxGa1-xN epitaxial films increases with growth on InN and decreases with growth on GaN.
Style APA, Harvard, Vancouver, ISO itp.
23

WANG, Xuewen, Wenwen LIU, Chunxue ZHAI, Jiangni YUN i Zhiyong ZHANG. "DFT Calculation on the Electronic Structure and Optical Properties of InxGa1-xN Alloy Semiconductors". Materials Science 26, nr 2 (18.12.2019): 127–32. http://dx.doi.org/10.5755/j01.ms.26.2.21569.

Pełny tekst źródła
Streszczenie:
Using the density functional theory (DFT) of the first principle and Generalized gradient approximation method, the electronic structures and optical properties of the InxGa1-xN crystals with different x (x = 0.25, 0.5, 0.75, 1) have been calculated in this paper. The influence of the electronic structure on the properties has been analyzed. Then the influence of doping quantity on the characteristics has been summarized, which also indicates the trend of complex dielectric function, absorption spectrum and transitivity. With the increase of x, the computational result shows that the optical band gap (i.e.Eg) of the InxGa1-xN crystal tends to be narrow, then the absorption spectrum shifts to the low-energy direction. And the Fermi energy slightly moves to the bottom of conduction band which would cause the growth of conductivity by increasing x. In a word, the InxGa1-xN compound can be achieved theoretically the adjustable Eg and photoelectric performance with x, which will be used in making various optoelectronic devices including solar cell and sensors.
Style APA, Harvard, Vancouver, ISO itp.
24

Annab, N., T. Baghdadli, S. Mamoun i A. E. Merad. "Numerical simulation of highly photovoltaic efficiency of InGaN based solar cells with ZnO as window layer". Journal of Ovonic Research 19, nr 4 (sierpień 2023): 421–31. http://dx.doi.org/10.15251/jor.2023.194.421.

Pełny tekst źródła
Streszczenie:
InxGa1-xN, as one promising nitride semiconductor alloys for modern optoelectronic devices, has received extensive attention in recent years. However, due to its powerful modulation of energy band gap from UV to visible spectra (0.7-3.4 eV) and its interesting absorption coefficient can range from 103 to 105 cm-1 , depending on the material properties, it can be considered as a potential candidate for high efficiency solar cells. The actual efficiency reached is (30.38%) [1]. In order to enhance more the efficiency, we perform in this work, a device modeling and numerical simulation using SCAPS software. We optimize the photovoltaic characteristics of a solar cell based on InxGa1-xN. This cell is mainly composed of indium gallium nitride semiconductors for both buffer and active layer p-InxGa1-xN/i-InxGa1-xN and the window layer contains of n-ZnO. The optimization of the various optoelectronic parameters allows improving performance of the solar cell, in addition to absorbing as much solar radiation as possible. The main photovoltaic parameters of the analog device: open circuit voltage, short circuit current density, fill factor and conversion efficiency (η) were compared and analyzed. We have reached the conversion efficiency of 26.11% for a thickness of 1450 nm and an n-doping of 3×1018 cm-3 in the active layer (In0.3Ga0.7N). This study investigates the great potential of InGaN solar cells and can be used for the design and manufacture of high efficiency III-nitride based solar cells.
Style APA, Harvard, Vancouver, ISO itp.
25

Pantha, B. N., R. Dahal, J. Li, J. Y. Lin, H. X. Jiang i G. Pomrenke. "Thermoelectric properties of InxGa1−xN alloys". Applied Physics Letters 92, nr 4 (28.01.2008): 042112. http://dx.doi.org/10.1063/1.2839309.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Kuo, Yen-Kuang, Han-Yi Chu, Sheng-Horng Yen, Bo-Ting Liou i Mei-Ling Chen. "Bowing parameter of zincblende InxGa1−xN". Optics Communications 280, nr 1 (grudzień 2007): 153–56. http://dx.doi.org/10.1016/j.optcom.2007.07.058.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
27

Li, S. X., K. M. Yu, J. Wu, R. E. Jones, W. Walukiewicz, J. W. Ager, W. Shan, E. E. Haller, Hai Lu i William J. Schaff. "Native defects in InxGa1−xN alloys". Physica B: Condensed Matter 376-377 (kwiecień 2006): 432–35. http://dx.doi.org/10.1016/j.physb.2005.12.111.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
28

Gartner, M., C. Kruse, M. Modreanu, A. Tausendfreund, C. Roder i D. Hommel. "Optical characterization of InxGa1−xN alloys". Applied Surface Science 253, nr 1 (październik 2006): 254–57. http://dx.doi.org/10.1016/j.apsusc.2006.05.077.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
29

Jenkins, David W., i John D. Dow. "Electronic structures and doping of InN,InxGa1−xN, andInxAl1−xN". Physical Review B 39, nr 5 (15.02.1989): 3317–29. http://dx.doi.org/10.1103/physrevb.39.3317.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Huq, Md Fazlul, Zamshed Iqbal Chowdhury, Mehedhi Hasan i Zahid Hasan Mahmood. "The efficiency of the single junction and multijunction InxGa1-xN solar cell using AMPS-1D simulator". Journal of Bangladesh Academy of Sciences 37, nr 1 (13.07.2013): 65–72. http://dx.doi.org/10.3329/jbas.v37i1.15682.

Pełny tekst źródła
Streszczenie:
Transparency loss and excess excitation loss are responsible for relatively lower conversion efficiency of single junction solar cell. One way to reduce these two losses is to use multijunction solar cell. In this research InxGa1-xN based single, double and triple junction solar cells were simulated employing AMPS-1D simulator. The band gap of each layer depends on the composition percentage of InN and GaN within InxGa1-xN. In this simulation the authors found 24.51, 33.89, and 42.12% efficiencies for single, double and triple junctions, respectively. DOI: http://dx.doi.org/10.3329/jbas.v37i1.15682 Journal of Bangladesh Academy of Sciences, Vol. 37, No. 1, 65-72, 2013
Style APA, Harvard, Vancouver, ISO itp.
31

Kim, Ki-Hong, In-Su Kim, Hun-Bo Park, In-Ho Bae, jae-In Yu i Yoon-Seok Jang. "Study of Optical Properties of InxGa1-xN/GaN Multi-Quantum-Well". Journal of the Korean Vacuum Society 18, nr 1 (30.01.2009): 37–43. http://dx.doi.org/10.5757/jkvs.2009.18.1.037.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
32

Manz, Ch, M. Kunzer, H. Obloh, A. Ramakrishnan i U. Kaufmann. "InxGa1−xN/GaN band offsets as inferred from the deep, yellow-red emission band in InxGa1−xN". Applied Physics Letters 74, nr 26 (28.06.1999): 3993–95. http://dx.doi.org/10.1063/1.124247.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

Hadjaj, F., M. Belhadj, K. Laoufi i A. Missoum. "Optimized design of strain-compensated InxGa1-xN/GaN and InxGa1-xN/InYGa1-YN multiple-quantum-well laser diodes". Journal of Ovonic Research 17, nr 2 (marzec 2021): 107–15. http://dx.doi.org/10.15251/jor.2021.172.107.

Pełny tekst źródła
Streszczenie:
We carried out a study of the strain-compensated InxGa1−xN/GaN and InxGa1-xN/InyGa1-yN multiple quantum wells, In order to carry out this analysis, we choose a set of three different types of samples. The optimization of this laser structure allowed us to determine the optimal values of the functional parameters, in order to adjust their performance and interest. We also studied the electronic and structural properties of compound semiconductor alloys used in wurtzite phase and we have presented a comparative theoretical study of both structures. Our studies show the improvement of the spontaneous emission spectra and better carrier confinement from the use of InxGa1-xN/InyGa1-yN MQW with higher In-content in barrier as active regions for diode lasers and this structure is useful for the design of new high performance Laser diodes emitting in the Blue/Violet range, and it’s also shows that the process of the electron-holes transition is strongly affected by the quantum well width and the Indium composition, and the InGaN lattice mismatch that increases with In-content causing the strain accumulation inside the QW structure. However, strain is undesirable as it can cause defects such as cracking at the interface.We can optimize the InGaN/GaN strained quantum well structures to achieve a reliable optoelectronic component. It suffices to incorporate small amounts of indium in the barrier enhances the annihilation of the defect and strain, thereby improving their structural properties.
Style APA, Harvard, Vancouver, ISO itp.
34

Dridi, Z., B. Bouhafs i P. Ruterana. "Pressure dependence of energy band gaps for AlxGa1 -xN, InxGa1 -xN and InxAl1 -xN". New Journal of Physics 4 (15.11.2002): 94. http://dx.doi.org/10.1088/1367-2630/4/1/394.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
35

Masyukov, N. A., i A. V. Dmitriev. "Hot Electrons in InxGa1–xN and InxAl1–xN Binary Solid Solutions". Moscow University Physics Bulletin 73, nr 3 (maj 2018): 325–28. http://dx.doi.org/10.3103/s0027134918030116.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Santos, A. M., E. C. F. Silva, O. C. Noriega, H. W. L. Alves, J. L. A. Alves i J. R. Leite. "Vibrational Properties of Cubic AlxGa1?xN and InxGa1?xN Ternary Alloys". physica status solidi (b) 232, nr 1 (lipiec 2002): 182–87. http://dx.doi.org/10.1002/1521-3951(200207)232:1<182::aid-pssb182>3.0.co;2-q.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Wang, Shuo, Hongen Xie, Hanxiao Liu, Alec M. Fischer, Heather McFavilen i Fernando A. Ponce. "Dislocation baskets in thick InxGa1−xN epilayers". Journal of Applied Physics 124, nr 10 (14.09.2018): 105701. http://dx.doi.org/10.1063/1.5042079.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
38

Shan, W., J. J. Song, Z. C. Feng, M. Schurman i R. A. Stall. "Pressure-dependent photoluminescence study of InxGa1−xN". Applied Physics Letters 71, nr 17 (27.10.1997): 2433–35. http://dx.doi.org/10.1063/1.120083.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
39

Kucheyev, S. O., J. S. Williams, J. Zou, S. J. Pearton i Y. Nakagawa. "Implantation-produced structural damage in InxGa1−xN". Applied Physics Letters 79, nr 5 (30.07.2001): 602–4. http://dx.doi.org/10.1063/1.1388881.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
40

Prozheeva, V., I. Makkonen, R. Cuscó, L. Artús, A. Dadgar, F. Plazaola i F. Tuomisto. "Radiation-induced alloy rearrangement in InxGa1−xN". Applied Physics Letters 110, nr 13 (27.03.2017): 132104. http://dx.doi.org/10.1063/1.4979410.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
41

Katsikini, M., E. C. Paloura, F. Boscherini, F. D’Acapito, C. B. Lioutas i D. Doppalapudi. "Microstructural characterization of InxGa1−xN MBE samples". Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 200 (styczeń 2003): 114–19. http://dx.doi.org/10.1016/s0168-583x(02)01706-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
42

Elyukhin, V. A. "Order–disorder transition in wurtzite InxGa1−xN". Journal of Crystal Growth 356 (październik 2012): 53–57. http://dx.doi.org/10.1016/j.jcrysgro.2012.07.011.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
43

Oh, Eunsoon, Myoung Hee Lee, Kwang Joo Kim, M. Y. Ryu, J. H. Song, S. W. Park, P. W. Yu, H. Park i Y. Park. "Cathodoluminescence study of InxGa1−xN quantum wells". Journal of Applied Physics 89, nr 5 (marzec 2001): 2839–42. http://dx.doi.org/10.1063/1.1345849.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
44

Teles, L. K., L. G. Ferreira, J. R. Leite, L. M. R. Scolfaro, A. Kharchenko, O. Husberg, D. J. As, D. Schikora i K. Lischka. "Strain-induced ordering in InxGa1−xN alloys". Applied Physics Letters 82, nr 24 (16.06.2003): 4274–76. http://dx.doi.org/10.1063/1.1583854.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
45

Alshehri, Bandar, Karim Dogheche, Sofiane Belahsene, Bilal Janjua, Abderrahim Ramdane, Gilles Patriarche, Tien-Khee Ng, Boon S-Ooi, Didier Decoster i Elhadj Dogheche. "Synthesis of In0.1Ga0.9N/GaN structures grown by MOCVD and MBE for high speed optoelectronics". MRS Advances 1, nr 23 (2016): 1735–42. http://dx.doi.org/10.1557/adv.2016.417.

Pełny tekst źródła
Streszczenie:
ABSTRACTIn this work, we report a comparative investigation of InxGa1-xN (SL) and InxGa1-xN/GaN (MQW) structures with an indium content equivalent to x=10%. Both structures are grown on (0001) sapphire substrates using MOCVD and MBE growth techniques. Optical properties are evaluated for samples using PL characteristics. Critical differences between the resulting epitaxy are observed. Microstructures have been assessed in terms of crystalline quality, density of dislocations and surface morphology. We have focused our study towards the fabrication of vertical PIN photodiodes. The technological process has been optimized as a function of the material structure. From the optical and electrical characteristics, this study demonstrates the benefit of InGaN/GaN MQW grown by MOCVD in comparison with MBE for high speed optoelectronic applications.
Style APA, Harvard, Vancouver, ISO itp.
46

Suzuki, Toshimasa, Ruichi Katayama, Shun Hibino, Yoshinori Kato, Fumitaka Ohashi, Takashi Itoh i Shuichi Nonomura. "Effect of thermal annealing in a-InxGa1–xN films prepared by reactive RF-sputtering". Canadian Journal of Physics 92, nr 7/8 (lipiec 2014): 943–46. http://dx.doi.org/10.1139/cjp-2013-0565.

Pełny tekst źródła
Streszczenie:
We deposited amorphous indium gallium nitride (a-InxGa1–xN) films at room temperature by reactive radio frequency sputtering with GaN and InN targets and investigated the change of their properties from thermal annealing at annealing temperatures, Ta, below 200 °C. A large change in the indium and nitrogen composition ratios was not observed by thermal annealing at a Ta below 200 °C. In the X-ray diffraction patterns of the films annealed at a Ta below 200 °C, no perceivable peaks assigned to crystalline InxGa1–xN were found. The photoconductivty, σp, increased with an increase in Ta. On the other hand, the increase of the dark conductivity, σd, was very small with an increase in Ta below 200 °C. As a result, the photosensitivity, σp/σd, increased from 252 to 2500 by thermal annealing at a Ta of 200 °C.
Style APA, Harvard, Vancouver, ISO itp.
47

Gorczyca, I., N. E. Christensen, A. Svane, K. Laaksonen i R. M. Nieminen. "Electronic Band Structure of InxGa1-xN under Pressure". Acta Physica Polonica A 112, nr 2 (sierpień 2007): 203–8. http://dx.doi.org/10.12693/aphyspola.112.203.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Gauthier-Brun, A., J. H. Teng, E. Dogheche, W. Liu, A. Gokarna, M. Tonouchi, S. J. Chua i D. Decoster. "Properties of InxGa1−xN films in terahertz range". Applied Physics Letters 100, nr 7 (13.02.2012): 071913. http://dx.doi.org/10.1063/1.3684836.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

McCluskey, M. D., C. G. Van de Walle, C. P. Master, L. T. Romano i N. M. Johnson. "Large band gap bowing of InxGa1−xN alloys". Applied Physics Letters 72, nr 21 (25.05.1998): 2725–26. http://dx.doi.org/10.1063/1.121072.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
50

Durbha, A. "Microstructural stability of ohmic contacts to InxGa1−xN". Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 14, nr 4 (lipiec 1996): 2582. http://dx.doi.org/10.1116/1.588771.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii