Gotowe bibliografie tematyczne / Integrated Heterogeneous Systems

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Integrated Heterogeneous Systems”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Integrated Heterogeneous Systems”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Integrated Heterogeneous Systems"

1

Matsumoto, Yoshiyasu. "Toward photochemistry of integrated heterogeneous systems". Journal of Chemical Physics 137, nr 9 (7.09.2012): 091705. http://dx.doi.org/10.1063/1.4746802.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kiefer, François. "Heterogeneous modelling tools for integrated production systems". International Journal of Production Research 38, nr 17 (listopad 2000): 4149–57. http://dx.doi.org/10.1080/00207540050204984.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Esashi, Masayoshi, i Shuji Tanaka. "Integrated Microsystems". Advances in Science and Technology 81 (wrzesień 2012): 55–64. http://dx.doi.org/10.4028/www.scientific.net/ast.81.55.

Pełny tekst źródła
Streszczenie:
Technology called MEMS (Micro Electro Mechanical Systems) or microsystems are heterogeneous integration on silicon chips and play important roles as sensors. MEMS as switches and resonators fabricated on LSI are needed for future multi-band wireless systems. MEMS for safety systems as event driven tactile sensor network for nursing robot are developed. Wafer level packaging for MEMS and open collaboration to reduce the cost for the development are discussed.
Style APA, Harvard, Vancouver, ISO itp.
4

Neal, Colin. "Towards lumped integrated models of complex heterogeneous environmental systems". Science of The Total Environment 183, nr 1-2 (kwiecień 1996): 115–24. http://dx.doi.org/10.1016/0048-9697(95)04976-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kang, Sukhoon, i Songchun Moon. "An integrated access control in heterogeneous distributed database systems". Microprocessing and Microprogramming 35, nr 1-5 (wrzesień 1992): 429–36. http://dx.doi.org/10.1016/0165-6074(92)90350-g.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Li, Shan, Ding Hua Zhang, Jing Tao Zhou, Guang Hui Ma i Hai Yang. "An XML-Based Middleware for Information Integration of Enterprise Heterogeneous Systems". Materials Science Forum 532-533 (grudzień 2006): 516–19. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.516.

Pełny tekst źródła
Streszczenie:
Nowadays, most data in enterprise systems is still stored in relational databases, which brings the majority of difficulties to achieve information interoperation between enterprise-level heterogeneous systems. In this context, we propose a middleware to integrate information from heterogeneous enterprise system based on XML standard. The proposed integration architecture aims at providing a coherent and meaningful view of the integrated heterogeneous information systems by leverage the back-end relational data sources. The architecture of the middleware relies on the well-known mediator/wrapper architecture and satisfies the semantic integration features by several main functions including data descriptions, schema transformations and integrations based on the XML-Schema standard.
Style APA, Harvard, Vancouver, ISO itp.
7

Chen, Z. S., Yong Min Yang i L. J. Song. "Ontology-Based Representation of Heterogeneous Mechanical Systems Information for Integrated Diagnostics". Applied Mechanics and Materials 29-32 (sierpień 2010): 258–63. http://dx.doi.org/10.4028/www.scientific.net/amm.29-32.258.

Pełny tekst źródła
Streszczenie:
During fault diagnostics of mechanical systems, information fusion methods were widely used to improve the reliability. However, diagnostic information comes from all life cycle of a mechanical device and they are always heterogeneous. Whereas heterogeneous information is difficult to be interconnecting, intercommunicating and inter-operating, so how to represent heterogeneous information is a key problem in integrated diagnostics. In this paper, a novel ontology-based representation method of heterogeneous diagnostic information is presented in detail. Firstly it introduces basic principles of ontology-based modeling. Then three methods of ontology-based information modeling are studied respectively. In the end an example of ontology-based modeling for a diesel engine is given.
Style APA, Harvard, Vancouver, ISO itp.
8

Kazior, Thomas E. "Beyond CMOS: heterogeneous integration of III–V devices, RF MEMS and other dissimilar materials/devices with Si CMOS to create intelligent microsystems". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 372, nr 2012 (28.03.2014): 20130105. http://dx.doi.org/10.1098/rsta.2013.0105.

Pełny tekst źródła
Streszczenie:
Advances in silicon technology continue to revolutionize micro-/nano-electronics. However, Si cannot do everything, and devices/components based on other materials systems are required. What is the best way to integrate these dissimilar materials and to enhance the capabilities of Si, thereby continuing the micro-/nano-electronics revolution? In this paper, I review different approaches to heterogeneously integrate dissimilar materials with Si complementary metal oxide semiconductor (CMOS) technology. In particular, I summarize results on the successful integration of III–V electronic devices (InP heterojunction bipolar transistors (HBTs) and GaN high-electron-mobility transistors (HEMTs)) with Si CMOS on a common silicon-based wafer using an integration/fabrication process similar to a SiGe BiCMOS process (BiCMOS integrates bipolar junction and CMOS transistors). Our III–V BiCMOS process has been scaled to 200 mm diameter wafers for integration with scaled CMOS and used to fabricate radio-frequency (RF) and mixed signals circuits with on-chip digital control/calibration. I also show that RF microelectromechanical systems (MEMS) can be integrated onto this platform to create tunable or reconfigurable circuits. Thus, heterogeneous integration of III–V devices, MEMS and other dissimilar materials with Si CMOS enables a new class of high-performance integrated circuits that enhance the capabilities of existing systems, enable new circuit architectures and facilitate the continued proliferation of low-cost micro-/nano-electronics for a wide range of applications.
Style APA, Harvard, Vancouver, ISO itp.
9

Kakhki, Mohammad Daneshvar, Hamid Nemati i Farhad Hassanzadeh. "A Virtual Supply Chain System for Improved Information Sharing and Decision Making". International Journal of Business Analytics 5, nr 1 (styczeń 2018): 16–32. http://dx.doi.org/10.4018/ijban.2018010102.

Pełny tekst źródła
Streszczenie:
Integrated supply chain information systems (ISCIS) face various barriers including lack of alignment between IT and business model, security and privacy concerns, behavioral and cultural issues, and heterogeneous software applications. This paper develops an architecture for ISCIS and validate it by interviewing experts. The proposed architecture is an intermediary to integrate in-house information systems as well as cloud-based systems across distributed heterogeneous supply chain networks. The developed ISCIS architecture works in three layers of data, processes, and knowledge and facilitates the alignment of information systems and decision making with business.
Style APA, Harvard, Vancouver, ISO itp.
10

Zhou, Hua Ping, i Ke Lei Sun. "Research of the Integration Model of Coal Heterogeneous Systems". Applied Mechanics and Materials 397-400 (wrzesień 2013): 2473–76. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.2473.

Pełny tekst źródła
Streszczenie:
This paper was linked to the requirement of coal mine information construction, firstly, on the basis of heterogeneous data environment of the coal mine to sort out, induction, classification, we established an integrated model from the coal underlying data to the application layer, which includes 4 layers: data acquisition layer, data source layer, intermediate interface layer, application layer. The model focused on the underlying data integration and intermediate interface layer data integration, put forward a design idea, which includes mine underlying data integration based on OPC interface and intermediate interface layer based on virtual database and data warehouse, the intermediate interface layer has 4 layers, they are virtual database sub-layer, the data warehouse sub-layer, meta-database sub-layer and service management sub-layer. The coal comprehensive integrated model provides a unified data access platform for integrated data query, 3D visualization integration, Mine Safety forecast and intelligent decision.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Integrated Heterogeneous Systems"

1

Papistas, Ioannis. "Design methodologies for heterogeneous 3-D integrated systems". Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/design-methodologies-for-heterogeneous-3d-integrated-systems(1df2e366-34e1-460c-8534-690ea5edaedb).html.

Pełny tekst źródła
Streszczenie:
Design techniques for heterogeneous three-dimensional (3-D) integrated circuits are developed in this thesis. Heterogeneous 3-D integration is a platform for multifunctional, high performance, and low power electronics. For the advancement of heterogeneous 3-D ICs, contactless solutions are investigated to implement inter-tier communication between tiers manufactured with disparate processes and heterogeneous technologies. Two challenges for the development of contactless inter-tier communication are addressed, the design of energy efficient, heterogeneous inductive link transceivers and the impact of crosstalk noise due to the on-chip spiral inductors. Inter-tier communication between circuits fabricated with disparate technologies requires transceivers capable of operating at dissimilar voltages. A low power transceiver design methodology is proposed exploiting the difference in the core voltage between disparate manufacturing processes in a 3-D system in package. A transceiver is designed to provide inter-tier communication between a sensing layer, designed in a commercial 0.35 Âμm process and a processing layer, designed in an advanced 65 nm process. A significant gain in the power consumed by the transceiver is shown compared to equivalent state-of-the-art prototypes, profiting by the tradeoff between the core voltage and sensing ability of the transceiver circuit in each process. Due to their wireless nature, however the use of inductive links introduces crosstalk noise due to the coupling between the on-chip inductor and on-chip interconnects in the vicinity of the inductor. The noise caused by the inductor on the power distribution network of an integrated system is explored, analysed, and modelled through electromagnetic simulations. The spatial distribution of the noise is described for several power distribution topologies to determine the preferred placement solution for the power and ground network in the vicinity of the inductor, considering the impact on other sources of noise, such as the resistive drop. Depending upon the power distribution network topology, the induced noise can be reduced up to 70% when the additional noise caused by the inductive link is considered by the routing algorithm. Additionally, a methodology utilising an analytic model is proposed for the evaluation of the crosstalk noise without resorting to electromagnetic simulations. A closed-form magnetostatic model is developed to assess the mutual inductance between the on-chip inductor and the power distribution network. Utilising the mutual inductance model, the crosstalk noise is evaluated with SPICE simulations. A signifcant benefit in speedup is achieved, up to four orders of magnitude for determining the mutual inductance and up to 4.7× for the assessment of the crosstalk noise. The accuracy of the model is within 10% of the electromagnetic simulation.
Style APA, Harvard, Vancouver, ISO itp.
2

Qiu, Xiangbin. "A Publish-Subscribe System for Data Replication and Synchronization Among Integrated Person-Centric Information Systems". DigitalCommons@USU, 2010. https://digitalcommons.usu.edu/etd/620.

Pełny tekst źródła
Streszczenie:
Synchronization of data across an integrated system of heterogeneous databases is a difficult but important task, especially in the context of integrating health care information throughout a region, state, or nation. This thesis describes the design and implementation of a data replication and synchronization tool, called the Sync Engine, which allows users to define custom data-sharing patterns and transformations for an integrated system of heterogeneous person-centric databases. This thesis also discusses the relationship between the Sync Engine's contributions and several relevant issues in the area of data integration and replication. The Sync Engine's design and implementation was validated by adapting it to CHARM, a real world integrated system currently in use at the Utah Department of Health.
Style APA, Harvard, Vancouver, ISO itp.
3

Wen, Hao. "IMPROVING PERFORMANCE AND ENERGY EFFICIENCY FOR THE INTEGRATED CPU-GPU HETEROGENEOUS SYSTEMS". VCU Scholars Compass, 2018. https://scholarscompass.vcu.edu/etd/5664.

Pełny tekst źródła
Streszczenie:
Current heterogeneous CPU-GPU architectures integrate general purpose CPUs and highly thread-level parallelized GPUs (Graphic Processing Units) in the same die. This dissertation focuses on improving the energy efficiency and performance for the heterogeneous CPU-GPU system. Leakage energy has become an increasingly large fraction of total energy consumption, making it important to reduce leakage energy for improving the overall energy efficiency. Cache occupies a large on-chip area, which are good targets for leakage energy reduction. For the CPU cache, we study how to reduce the cache leakage energy efficiently in a hybrid SPM (Scratch-Pad Memory) and cache architecture. For the GPU cache, the access pattern of GPU cache is different from the CPU, which usually has little locality and high miss rate. In addition, GPU can hide memory latency more effectively due to multi-threading. Because of the above reasons, we find it is possible to place the cache lines of the GPU data caches into the low power mode more aggressively than traditional leakage management for CPU caches, which can reduce more leakage energy without significant performance degradation. The contention in shared resources between CPU and GPU, such as the last level cache (LLC), interconnection network and DRAM, may degrade both CPU and GPU performance. We propose a simple yet effective method based on probability to control the LLC replacement policy for reducing the CPU’s inter-core conflict misses caused by GPU without significantly impacting GPU performance. In addition, we develop two strategies to combine the probability based method for the LLC and an existing technique called virtual channel partition (VCP) for the interconnection network to further improve the CPU performance. For a specific graph application of Breadth first search (BFS), which is a basis for graph search and a core building block for many higher-level graph analysis applications, it is a typical example of parallel computation that is inefficient on GPU architectures. In a graph, a small portion of nodes may have a large number of neighbors, which leads to irregular tasks on GPUs. These irregularities limit the parallelism of BFS executing on GPUs. Unlike the previous works focusing on fine-grained task management to address the irregularity, we propose Virtual-BFS (VBFS) to virtually change the graph itself. By adding virtual vertices, the high-degree nodes in the graph are divided into groups that have an equal number of neighbors, which increases the parallelism such that more GPU threads can work concurrently. This approach ensures correctness and can significantly improve both the performance and energy efficiency on GPUs.
Style APA, Harvard, Vancouver, ISO itp.
4

Zhu, Cheng. "Resource Management Scheme and Network Selection Strategy for Integrated Multiple Traffic Heterogeneous Systems". University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1265988792.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Robino, Francesco. "A model-based design approach for heterogeneous NoC-based MPSoCs on FPGA". Licentiate thesis, KTH, Elektroniksystem, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145521.

Pełny tekst źródła
Streszczenie:
Network-on-chip (NoC) based multi-processor systems-on-chip (MPSoCs) are promising candidates for future multi-processor embedded platforms, which are expected to be composed of hundreds of heterogeneous processing elements (PEs) to potentially provide high performances. However, together with the performances, the systems complexity will increase, and new high level design techniques will be needed to efficiently model, simulate, debug and synthesize them. System-level design (SLD) is considered to be the next frontier in electronic design automation (EDA). It enables the description of embedded systems in terms of abstract functions and interconnected blocks. A promising complementary approach to SLD is the use of models of computation (MoCs) to formally describe the execution semantics of functions and blocks through a set of rules. However, also when this formalization is used, there is no clear way to synthesize system-level models into software (SW) and hardware (HW) towards a NoC-based MPSoC implementation, i.e., there is a lack of system design automation (SDA) techniques to rapidly synthesize and prototype system-level models onto heterogeneous NoC-based MPSoCs. In addition, many of the proposed solutions require large overhead in terms of SW components and memory requirements, resulting in complex and customized multi-processor platforms. In order to tackle the problem, a novel model-based SDA flow has been developed as part of the thesis. It starts from a system-level specification, where functions execute according to the synchronous MoC, and then it can rapidly prototype the system onto an FPGA configured as an heterogeneous NoC-based MPSoC. In the first part of the thesis the HeartBeat model is proposed as a model-based technique which fills the abstraction gap between the abstract system-level representation and its implementation on the multiprocessor prototype. Then details are provided to describe how this technique is automated to rapidly prototype the modeled system on a flexible platform, permitting to adjust the system specification until the designer is satisfied with the results. Finally, the proposed SDA technique is improved defining a methodology to automatically explore possible design alternatives for the modeled system to be implemented on a heterogeneous NoC-based MPSoC. The goal of the exploration is to find an implementation satisfying the designer's requirements, which can be integrated in the proposed SDA flow. Through the proposed SDA flow, the designer is relieved from implementation details and the design time of systems targeting heterogeneous NoC-based MPSoCs on FPGA is significantly reduced. In addition, it reduces possible design errors proposing a completely automated technique for fast prototyping. Compared to other SDA flows, the proposed technique targets a bare-metal solution, avoiding the use of an operating system (OS). This reduces the memory requirements on the FPGA platform comparing to related work targeting MPSoC on FPGA. At the same time, the performance (throughput) of the modeled applications can be increased when the number of processors of the target platform is increased. This is shown through a wide set of case studies implemented on FPGA.

QC 20140609

Style APA, Harvard, Vancouver, ISO itp.
6

Radhakrishnan, Swarnalatha Computer Science &amp Engineering Faculty of Engineering UNSW. "Heterogeneous multi-pipeline application specific instruction-set processor design and implementation". Awarded by:University of New South Wales. Computer Science and Engineering, 2006. http://handle.unsw.edu.au/1959.4/29161.

Pełny tekst źródła
Streszczenie:
Embedded systems are becoming ubiquitous, primarily due to the fast evolution of digital electronic devices. The design of modern embedded systems requires systems to exhibit, high performance and reliability, yet have short design time and low cost. Application Specific Instruction set processors (ASIPs) are widely used in embedded system since they are economical to use, flexible, and reusable (thus saves design time). During the last decade research work on ASIPs have been carried out in mainly for single pipelined processors. Improving performance in processors is possible by exploring the available parallelism in the program. Designing of multiple parallel execution paths for parallel execution of the processor naturally incurs additional cost. The methodology presented in this dissertation has addressed the problem of improving performance in ASIPs, at minimal additional cost. The devised methodology explores the available parallelism of an application to generate a multi-pipeline heterogeneous ASIP. The processor design is application specific. No pre-defined IPs are used in the design. The generated processor contains multiple standalone pipelined data paths, which are not necessarily identical, and are connected by the necessary bypass paths and control signals. Control unit are separate for each pipeline (though with the same clock) resulting in a simple and cost effective design. By using separate instruction and data memories (Harvard architecture) and by allowing memory access by two separate pipes, the complexity of the controller and buses are reduced. The impact of higher memory latencies is nullified by utilizing parallel pipes during memory access. Efficient bypass network selection and encoding techniques provide a better implementation. The initial design approach with only two pipelines without bypass paths show speed improvements of up to 36% and switching activity reductions of up to 11%. The additional area costs around 16%. An improved design with different number of pipelines (more than two) based on applications show on average of 77% performance improvement with overheads of: 49% on area; 51% on leakage power; 17% on switching activity; and 69% on code size. The design was further trimmed, with bypass path selection and encoding techniques, which show a saving of up to 32% of area and 34% of leakage power with 6% performance improvement and 69% of code size reduction compared to the design approach without these techniques in the multi pipeline design.
Style APA, Harvard, Vancouver, ISO itp.
7

Yulei, W. U. "Performance modelling and evaluation of heterogeneous wired / wireless networks under Bursty Traffic. Analytical models for performance analysis of communication networks in multi-computer systems, multi-cluster systems, and integrated wireless systems". Thesis, University of Bradford, 2010. http://hdl.handle.net/10454/4423.

Pełny tekst źródła
Streszczenie:
Computer networks can be classified into two broad categories: wired networks and wireless networks, according to the hardware and software technologies used to interconnect the individual devices. Wired interconnection networks are hardware fabrics supporting communications between individual processors in highperformance computing systems (e.g., multi-computer systems and cluster systems). On the other hand, due to the rapid development of wireless technologies, wireless networks have emerged and become an indispensable part for people's lives. The integration of different wireless technologies is an effective approach to accommodate the increasing demand of the users to communicate with each other and access the Internet. This thesis aims to investigate the performance of wired interconnection networks and integrated wireless networks under the realistic working conditions. Traffic patterns have a significant impact on network performance. A number of recent measurement studies have convincingly demonstrated that the traffic generated by many real-world applications in communication networks exhibits bursty arrival nature and the message destinations are non-uniformly distributed. Analytical models for the performance evaluation of wired interconnection networks and integrated wireless networks have been widely reported. However, most of these models are developed under the simplified assumption of non-bursty Poisson process with uniformly distributed message destinations. To fill this gap, this thesis first presents an analytical model to investigate the performance of wired interconnection networks in multi-computer systems. Secondly, the analytical models for wired interconnection networks in multi-cluster systems are developed. Finally, this thesis proposes analytical models to evaluate the end-to-end delay and throughput of integrated wireless local area networks and wireless mesh networks. These models are derived when the networks are subject to bursty traffic with non-uniformly distributed message destinations which can capture the burstiness of real-world network traffic in the both temporal domain and spatial domain. Extensive simulation experiments are conducted to validate the accuracy of the analytical models. The models are then used as practical and cost-effective tools to investigate the performance of heterogeneous wired or wireless networks under the traffic patterns exhibited by real-world applications.
Style APA, Harvard, Vancouver, ISO itp.
8

Wong, Chong Wan. "Using dynamically-generated account to integrate heterogeneous B2C e-payment systems". Thesis, University of Macau, 2010. http://umaclib3.umac.mo/record=b2148240.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lohse, Marco. "Network integrated multimedia middleware, services, and applications". Saarbrücken VDM Verlag Dr. Müller, 2005. http://d-nb.info/987144383/04.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Attwater, Iain James Stuart. "Development of an expert system application combining heterogeneous software to form an integrated and concurrent pressure vessel design system". Thesis, University of the West of Scotland, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259995.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Integrated Heterogeneous Systems"

1

Farooq, Umer. Tree-based Heterogeneous FPGA Architectures: Application Specific Exploration and Optimization. New York, NY: Springer New York, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Anis, Husain, Fallahi Mahmoud i SPIE--the International Society for Optical Engineering., red. Heterogeneous integration: Systems on a chip : proceedings of a conference held 26-27 January 1998, San Jose, California. Bellingham, WA: SPIE Optical Engineering Press, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Elfadel, Ibrahim (Abe) M., i Gerhard Fettweis. 3D Stacked Chips: From Emerging Processes to Heterogeneous Systems. Springer, 2016.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Elfadel, Ibrahim (Abe) M., i Gerhard Fettweis. 3D Stacked Chips: From Emerging Processes to Heterogeneous Systems. Springer London, Limited, 2016.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Elfadel, Ibrahim (Abe) M., i Gerhard Fettweis. 3D Stacked Chips: From Emerging Processes to Heterogeneous Systems. Springer, 2018.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Park, Jong H. An integrated approach to knowledge sharing among heterogeneous rule-based systems. 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Nino, Juan C., Fred Roozeboom, Susan Trolier-McKinstry, Paul Muralt i David LaVan. Heterogeneous Integration of Materials for Passive Components and Smart Systems: Volume 969. University of Cambridge ESOL Examinations, 2014.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Treebased Heterogeneous Fpga Architectures Application Specific Exploration And Optimization. Springer, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Mehrez, Habib, Umer Farooq i Zied Marrakchi. Tree-based Heterogeneous FPGA Architectures: Application Specific Exploration and Optimization. Springer, 2014.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Heterogeneous Integration of Materials for Passive Components and Smart Systems: Symposium Held November 27-29, 2006, Boston, Massachusetts, U.S.A. (Materials Research Society Symposium Proceedings). Materials Research Society, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Integrated Heterogeneous Systems"

1

Benoit, Pascal, Gilles Sassatelli, Philippe Maurine, Lionel Torres, Nadine Azemard, Michel Robert, Fabien Clermidy i in. "Towards Autonomous Scalable Integrated Systems". W Design Technology for Heterogeneous Embedded Systems, 63–89. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-1125-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Hofstee, H. Peter. "Heterogeneous Multi-core Processors: The Cell Broadband Engine". W Integrated Circuits and Systems, 271–95. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0263-4_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Fried, Sholom, i Jung Tjong. "Implementing Integrated Monitoring Systems for Heterogeneous Networks". W Network Management and Control, 69–79. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4613-1471-4_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Hwang, Sang-Won, Young-Kwang Nam, Lee-Nam Kwon, Jae-Soo Kim i Byoung-Dai Lee. "Integrated Information Retrieval for Distributed Heterogeneous Ontology Systems". W Lecture Notes in Electrical Engineering, 225–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47895-0_28.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Büyüközkan, Gülçin, Deniz Uztürk i Öykü Ilıcak. "Heterogeneous Information Integrated QFD for Smart Bicycle Design". W Studies in Systems, Decision and Control, 107–32. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-42188-5_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Domenig, Ruxandra, i Klaus R. Dittrich. "Query Explorativeness for Integrated Search in Heterogeneous Data Sources". W Advanced Information Systems Engineering, 715–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-47961-9_52.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Solodovnikova, Darja, Laila Niedrite i Lauma Svilpe. "An Approach to Evolution Management in Integrated Heterogeneous Data Sources". W Enterprise Information Systems, 47–70. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-08965-7_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Wu, Hongyi, Chunming Qiao, Swades De, Evsen Yanmaz i Ozan Tonguz. "Quality of Coverage (QoC) in Integrated Heterogeneous Wireless Systems". W Lecture Notes in Computer Science, 689–700. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11599463_67.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Pasricha, Sudeep, i Nikil D. Dutt. "On-Chip Optical Ring Bus Communication Architecture for Heterogeneous MPSoC". W Integrated Optical Interconnect Architectures for Embedded Systems, 153–76. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-6193-8_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Ricciotti, Wilmer, i James Cheney. "Query Lifting". W Programming Languages and Systems, 579–606. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72019-3_21.

Pełny tekst źródła
Streszczenie:
AbstractLanguage-integrated query based on comprehension syntax is a powerful technique for safe database programming, and provides a basis for advanced techniques such as query shredding or query flattening that allow efficient programming with complex nested collections. However, the foundations of these techniques are lacking: although SQL, the most widely-used database query language, supports heterogeneous queries that mix set and multiset semantics, these important capabilities are not supported by known correctness results or implementations that assume homogeneous collections. In this paper we study language-integrated query for a heterogeneous query language $$\mathcal {NRC}_{\lambda }( Set,Bag )$$ NRC λ ( S e t , B a g ) that combines set and multiset constructs. We show how to normalize and translate queries to SQL, and develop a novel approach to querying heterogeneous nested collections, based on the insight that “local” query subexpressions that calculate nested subcollections can be “lifted” to the top level analogously to lambda-lifting for local function definitions.
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Integrated Heterogeneous Systems"

1

Chang, Li-Wen, Juan Gómez-Luna, Izzat El Hajj, Sitao Huang, Deming Chen i Wen-mei Hwu. "Collaborative Computing for Heterogeneous Integrated Systems". W ICPE '17: ACM/SPEC International Conference on Performance Engineering. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3030207.3030244.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Power, Jason, Arkaprava Basu, Junli Gu, Sooraj Puthoor, Bradford M. Beckmann, Mark D. Hill, Steven K. Reinhardt i David A. Wood. "Heterogeneous system coherence for integrated CPU-GPU systems". W the 46th Annual IEEE/ACM International Symposium. New York, New York, USA: ACM Press, 2013. http://dx.doi.org/10.1145/2540708.2540747.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Park, Jong H., i Stanley Y. W. Su. "An integrated approach to heterogeneous expert systems". W the third international conference. New York, New York, USA: ACM Press, 1990. http://dx.doi.org/10.1145/98894.98897.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Liang, Ping, Yunsheng Liu, Shuming Liang i Heping Chen. "Semantic Query for Integrated Heterogeneous Database Systems". W 2008 First International Conference on Intelligent Networks and Intelligent Systems (ICINIS). IEEE, 2008. http://dx.doi.org/10.1109/icinis.2008.166.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

"Compact modeling support for heterogeneous systems". W 2014 21st International Conference "Mixed Design of Integrated Circuits & Systems" (MIXDES). IEEE, 2014. http://dx.doi.org/10.1109/mixdes.2014.6872149.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Yoo, S. J. B. "Heterogeneous integrated systems for future computing and networking". W 2013 IEEE Photonics Society Summer Topical Meeting Series. IEEE, 2013. http://dx.doi.org/10.1109/phosst.2013.6614536.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Lam, Y. M., J. G. F. Coutinho, W. Luk i P. H. W. Leong. "Integrated Hardware/Software Codesign for Heterogeneous Computing Systems". W 2008 4th Southern Conference on Programmable Logic (SPL). IEEE, 2008. http://dx.doi.org/10.1109/spl.2008.4547761.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kim, Samuel S., Ehsan Saeedi, Deirdre R. Meldrum i Babak A. Parviz. "Self-Assembled Heterogeneous Integrated Fluorescence Detection System". W 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007. http://dx.doi.org/10.1109/nems.2007.352170.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Gomez-Luna, Juan, Izzat El Hajj, Li-Wen Chang, Victor Garcia-Flores, Simon Garcia de Gonzalo, Thomas B. Jablin, Antonio J. Pena i Wen-mei Hwu. "Chai: Collaborative heterogeneous applications for integrated-architectures". W 2017 IEEE International Symposium on Performance Analysis of Systems and Software (ISPASS). IEEE, 2017. http://dx.doi.org/10.1109/ispass.2017.7975269.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gruenewald, Armin, Michael Wahl i Rainer Brueck. "Manufacturing and test assistance for 3D-Integrated heterogeneous systems". W 2014 International 3D Systems Integration Conference (3DIC). IEEE, 2014. http://dx.doi.org/10.1109/3dic.2014.7152171.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Integrated Heterogeneous Systems"

1

de Kemp, E. A., H. A. J. Russell, B. Brodaric, D. B. Snyder, M. J. Hillier, M. St-Onge, C. Harrison i in. Initiating transformative geoscience practice at the Geological Survey of Canada: Canada in 3D. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/331097.

Pełny tekst źródła
Streszczenie:
Application of 3D technologies to the wide range of Geosciences knowledge domains is well underway. These have been operationalized in workflows of the hydrocarbon sector for a half-century, and now in mining for over two decades. In Geosciences, algorithms, structured workflows and data integration strategies can support compelling Earth models, however challenges remain to meet the standards of geological plausibility required for most geoscientific studies. There is also missing links in the institutional information infrastructure supporting operational multi-scale 3D data and model development. Canada in 3D (C3D) is a vision and road map for transforming the Geological Survey of Canada's (GSC) work practice by leveraging emerging 3D technologies. Primarily the transformation from 2D geological mapping, to a well-structured 3D modelling practice that is both data-driven and knowledge-driven. It is tempting to imagine that advanced 3D computational methods, coupled with Artificial Intelligence and Big Data tools will automate the bulk of this process. To effectively apply these methods there is a need, however, for data to be in a well-organized, classified, georeferenced (3D) format embedded with key information, such as spatial-temporal relations, and earth process knowledge. Another key challenge for C3D is the relative infancy of 3D geoscience technologies for geological inference and 3D modelling using sparse and heterogeneous regional geoscience information, while preserving the insights and expertise of geoscientists maintaining scientific integrity of digital products. In most geological surveys, there remains considerable educational and operational challenges to achieve this balance of digital automation and expert knowledge. Emerging from the last two decades of research are more efficient workflows, transitioning from cumbersome, explicit (manual) to reproducible implicit semi-automated methods. They are characterized by integrated and iterative, forward and reverse geophysical modelling, coupled with stratigraphic and structural approaches. The full impact of research and development with these 3D tools, geophysical-geological integration and simulation approaches is perhaps unpredictable, but the expectation is that they will produce predictive, instructive models of Canada's geology that will be used to educate, prioritize and influence sustainable policy for stewarding our natural resources. On the horizon are 3D geological modelling methods spanning the gulf between local and frontier or green-fields, as well as deep crustal characterization. These are key components of mineral systems understanding, integrated and coupled hydrological modelling and energy transition applications, e.g. carbon sequestration, in-situ hydrogen mining, and geothermal exploration. Presented are some case study examples at a range of scales from our efforts in C3D.
Style APA, Harvard, Vancouver, ISO itp.
2

de Kemp, E. A., H. A. J. Russell, B. Brodaric, D. B. Snyder, M. J. Hillier, M. St-Onge, C. Harrison i in. Initiating transformative geoscience practice at the Geological Survey of Canada: Canada in 3D. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331871.

Pełny tekst źródła
Streszczenie:
Application of 3D technologies to the wide range of Geosciences knowledge domains is well underway. These have been operationalized in workflows of the hydrocarbon sector for a half-century, and now in mining for over two decades. In Geosciences, algorithms, structured workflows and data integration strategies can support compelling Earth models, however challenges remain to meet the standards of geological plausibility required for most geoscientific studies. There is also missing links in the institutional information infrastructure supporting operational multi-scale 3D data and model development. Canada in 3D (C3D) is a vision and road map for transforming the Geological Survey of Canada's (GSC) work practice by leveraging emerging 3D technologies. Primarily the transformation from 2D geological mapping, to a well-structured 3D modelling practice that is both data-driven and knowledge-driven. It is tempting to imagine that advanced 3D computational methods, coupled with Artificial Intelligence and Big Data tools will automate the bulk of this process. To effectively apply these methods there is a need, however, for data to be in a well-organized, classified, georeferenced (3D) format embedded with key information, such as spatial-temporal relations, and earth process knowledge. Another key challenge for C3D is the relative infancy of 3D geoscience technologies for geological inference and 3D modelling using sparse and heterogeneous regional geoscience information, while preserving the insights and expertise of geoscientists maintaining scientific integrity of digital products. In most geological surveys, there remains considerable educational and operational challenges to achieve this balance of digital automation and expert knowledge. Emerging from the last two decades of research are more efficient workflows, transitioning from cumbersome, explicit (manual) to reproducible implicit semi-automated methods. They are characterized by integrated and iterative, forward and reverse geophysical modelling, coupled with stratigraphic and structural approaches. The full impact of research and development with these 3D tools, geophysical-geological integration and simulation approaches is perhaps unpredictable, but the expectation is that they will produce predictive, instructive models of Canada's geology that will be used to educate, prioritize and influence sustainable policy for stewarding our natural resources. On the horizon are 3D geological modelling methods spanning the gulf between local and frontier or green-fields, as well as deep crustal characterization. These are key components of mineral systems understanding, integrated and coupled hydrological modelling and energy transition applications, e.g. carbon sequestration, in-situ hydrogen mining, and geothermal exploration. Presented are some case study examples at a range of scales from our efforts in C3D.
Style APA, Harvard, Vancouver, ISO itp.
3

Patel, Reena. Complex network analysis for early detection of failure mechanisms in resilient bio-structures. Engineer Research and Development Center (U.S.), czerwiec 2021. http://dx.doi.org/10.21079/11681/41042.

Pełny tekst źródła
Streszczenie:
Bio-structures owe their remarkable mechanical properties to their hierarchical geometrical arrangement as well as heterogeneous material properties. This dissertation presents an integrated, interdisciplinary approach that employs computational mechanics combined with flow network analysis to gain fundamental insights into the failure mechanisms of high performance, light-weight, structured composites by examining the stress flow patterns formed in the nascent stages of loading for the rostrum of the paddlefish. The data required for the flow network analysis was generated from the finite element analysis of the rostrum. The flow network was weighted based on the parameter of interest, which is stress in the current study. The changing kinematics of the structural system was provided as input to the algorithm that computes the minimum-cut of the flow network. The proposed approach was verified using two classical problems three- and four-point bending of a simply-supported concrete beam. The current study also addresses the methodology used to prepare data in an appropriate format for a seamless transition from finite element binary database files to the abstract mathematical domain needed for the network flow analysis. A robust, platform-independent procedure was developed that efficiently handles the large datasets produced by the finite element simulations. Results from computational mechanics using Abaqus and complex network analysis are presented.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Integrated Heterogeneous Systems” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii