Artykuły w czasopismach: „Installations”

1

Kurdziel, John M. "Standard Installation Direct Design Trench Installations". Transportation Research Record: Journal of the Transportation Research Board 1656, nr 1 (styczeń 1999): 58–63. http://dx.doi.org/10.3141/1656-08.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Anang Dasa Novfowan, Mochammad Mieftah, Rachmat Sutjipto, Dhimas Kharisma i Sukamdi. "Pelatihan Pemasangan Instalasi Listrik Tenaga Untuk Masyarakat Binaan Disnaker Di Pemkot Malang". Jurnal Pengabdian Kepada Masyarakat 9, nr 1 (30.06.2022): 14–18. http://dx.doi.org/10.33795/jabdimas.v9i1.152.

Pełny tekst źródła

Streszczenie:

Training on the correct, precise and safe installation of electric power installations for the people assisted by the Manpower Office in the Malang City Government. The existence of this training is expected to provide additional skills for installing power installations, to be used in working on installing power installations that are correct and safe and in accordance with standards, so as to minimize work hazards or accidents due to errors due to installation and use.

Style APA, Harvard, Vancouver, ISO itp.

3

Putra, Adi Pratama. "Penyuluhan Dan Instalasi Kelistrikan Pada Mesin Pemisah Kulit Ari Kedelai UMKM Produksi Tempe Tradisional Di Desa Wringinpitu Banyuwangi". JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) 3, nr 2 (24.10.2019): 155. http://dx.doi.org/10.36339/je.v3i2.243.

Pełny tekst źródła

Streszczenie:

Problems found in related to electrical installations in buildings/houses are not arranged perfectly or the installation is not following to the procedure because there have been improvements to the electrical installations of the building or house beforehand. Electrical installations that will be installed should also consider the concept of savings and costs Installation and addition of electrical installations with equipment that is not based on knowledge of electrical installations can be dangerous if not carried out by save maintenance and security of existing electrical equipment. Based on the situation analysis of MSME traditional tempe producers that have a separator machine using an electric motor, there is a need for a good and correct electrical installation to prevent the user avoid from electrical shock that could be potentially dangerous, because the separator from the soybean skin is a direct contact with water. The method of implementation in community service activities at Tempe producers MSMEs include; Field Observation, Tool Design, Tool Assembly, Tool Testing, Tool Installation, Electricity Installation, Electricity and Operation Training, and MONEV. The results of a series of community service activities that have been carried out are being able to increase the knowledge of all who are on the business purposes to understand how electricity and good installation are save from an unwanted thing about electricity.

Style APA, Harvard, Vancouver, ISO itp.

4

Purwono, Efa Yumna. "Evaluasi Kelayakan Instalasi Gedung TTSK 3 Lantai PT Phapros, Tbk Semarang". ENERGI & KELISTRIKAN 14, nr 1 (27.06.2022): 109–18. http://dx.doi.org/10.33322/energi.v14i1.1675.

Pełny tekst źródła

Streszczenie:

The development of time and the increasing need for electricity, electrical installations must undergo changes both in quality and quantity. The decrease in the quality of electrical installations and changes in the quantity of load points can result in changes in the quality and quantity of installation feasibility and safety of the wearer. Therefore, checking and evaluating electrical installations is carried out. Research at the TTSK building of PT Phapros, Tbk determines predetermined criteria, including: earth resistance, insulation resistance, safety, and delivery cross-section. After meeting the criteria, installation testing is carried out. The result of the feasibility evaluation of the installation feasibility of PT Phapros 3 floor TTSK building, Tbk reached 92% feasible, and 8% unfit. These tests include testing of earth resistance with a decent number of 67%. From the results of testing on insulation resistance with a decent amount of 100%. From the safety of electrical installations with a decent amount of 100%, as well as the results of the cross-section of electrical installations with a decent amount of 100%.

Style APA, Harvard, Vancouver, ISO itp.

5

Novac, Bogdan. "Electromagnetic Vibration System Designed for De-Stressing Welded Joints from Large Metal Constructions". RECENT - REzultatele CErcetărilor Noastre Tehnice 21, nr 2 (19.11.2020): 78–82. http://dx.doi.org/10.31926/recent.2020.61.078.

Pełny tekst źródła

Streszczenie:

The paper presents an electromagnetic installation for producing vibrations, used in the de-tensioning of welded joints of welded constructions. They are also presented novelty elements regarding the domains of use of these types of installations, as well as the benefit of their use. They are highlighted the component parts of these types of installations. This type of electromagnetic installations can be used at the treatment of welded joints used only on magnetic steels. The results obtained with this type of installations are obvious. This vibration system can be used to de-stress welded joints and can successfully replace other types of conventional heat treatment. The components of this installation were purchased commercially. That makes possible that this type of installation can be easily built. The installation has designed a protection system for high voltages and currents. The main purpose of using this type of installation is to reduce the costs of conventional heat treatment, used at welded metal constructions. The installation can be used without strict protection rules. If we talk about the results, we can say that this type of treatment can bring significant economic benefits.

Style APA, Harvard, Vancouver, ISO itp.

6

Гонтарев, С., S. Gontarev, Сергей Мошаров, Sergey Mosharov, М. Корсак i M. Korsak. "Novel Way for Continuous Filtration of Large Volumes of Water in Environmental Monitoring System". Safety in Technosphere 6, nr 3 (17.10.2017): 13–17. http://dx.doi.org/10.12737/article_59d3a1993a6f61.46420059.

Pełny tekst źródła

Streszczenie:

During ecological researches and monitoring of the natural aquatic environment it is very often necessary to carry out filtration of water large volumes for extraction on filters the weighed components, and for subsequent analysis of mineral and organic suspension’s structure. The installations applied now for vacuum filtration have a number of essential restrictions. The most important deficiency of existing installations for vacuum filtration is the use of a leak-tight receiver with rigid design. At intensive filtration such receiver has to have a large volume that limits filtration installation’s possibilities for transportation and afield operation. Need of a vacuum pump’s protection against a filtrate intrusion demands constant monitoring for receiver filling at the large filtration volume. During receiver filling the filtration process needs to be interrupted for filtrate removal from the receiver, but sometimes such interruption significantly complicates the filtration process. In this paper is described the developed new mobile installation for continuous vacuum filtration based on a closed cycle water-jet pump for vacuum generation. The proposed installation for vacuum filtration of natural water’s weighed components allows carry out filtration of water large volumes in the continuous mode. The installation hasn’t a leak-tight vacuum receiver so that it has small dimensions.

Style APA, Harvard, Vancouver, ISO itp.

7

Wiśniewska, Marta, i Krystyna Lelicińska-Serafin. "The Role and Effectiveness of the MBT Installation in Poland Based on Selected Examples". Civil and Environmental Engineering Reports 29, nr 2 (1.06.2019): 1–12. http://dx.doi.org/10.2478/ceer-2019-0011.

Pełny tekst źródła

Streszczenie:

Abstract The paper presents examples of installations for the mechanical and biological treatment of municipal waste in Poland. Each of the presented installations is defined as a regional municipal waste treatment installation (RIPOK). Their technological solutions and work efficiency have been compared in this study. In addition, the loss of waste mass as a result of processes occurring in the biological part of individual installations was calculated in the research. The paper refers to the National Waste Management Plan (KPGO 2022) regarding the circular economy. As intended by the circular economy, MBP installations will be transformed into installations that will treat selectively collected municipal waste and become Regional Recycling Centers (RCR).

Style APA, Harvard, Vancouver, ISO itp.

8

Wichliński, Michał, i Janusz Staszkiewicz. "Photovoltaic installation for a roofed car park in Egypt as an example of effective use of solar energy". E3S Web of Conferences 49 (2018): 00127. http://dx.doi.org/10.1051/e3sconf/20184900127.

Pełny tekst źródła

Streszczenie:

Photovoltaic installations are becoming an increasingly important player in the global renewable energy production market. The biggest disadvantage of photovoltaic installations is their high price, and relatively low efficiency. Photovoltaic cells achieve a theoretical efficiency of 30%, but in real conditions this efficiency is much lower at roughly 15%. Photovoltaic installations are particularly recommended in locations where the amount of solar radiation is high and where photovoltaic installations will be able to work at full capacity for most of the year. The paper presents an analysis of the work of a photovoltaic installation built for a roofed car park located in eastern Cairo, the capital of Egypt. The installation is built for a car park located at the Schlumberger company. The installation is built of 1344 Hanwha Q.Power L-G325 silicon polycrystalline cell modules, each module has a power of 325 Wp, and the total area of the installation is 2,611 m2. Effective irradiance on collectors is 1922 kWh/m2. The array’s nominal produced energy was 840 MWh/year, the amount of electricity injected into the grid was 587 MWh/year, which means that the calculated performance ratio was 0.62.

Style APA, Harvard, Vancouver, ISO itp.

9

Hadiyanto, Gunawan Toto, Djoko Anwar Mardiono, Bambang Apriyanto, Nurhatisyah i Nur Effendi Effendy. "INSTALASI LISTRIK MASJID AL-IKHLAS KAMPUNG KARET-BATU BESAR KECAMATAN NONGSA KOTA BATAM". Jurnal Pendekar Nusantara 1, nr 1 (10.10.2023): 53–63. http://dx.doi.org/10.37776/pend.v1i1.1221.

Pełny tekst źródła

Streszczenie:

The people of Kampung Karet, Nongsa District, most of them still don't understand about electrical installations, the condition of the electrical installation system in people's homes and especially places of worship (mosques) are still many that do not comply with general regulations regarding electrical installations. Apart from that, there are still many connections. -connection of electrical installations carried out by the community itself which does not comply with regulations. Community service by providing counseling and going directly to see the location that is the target of carrying out service activities, namely the Al-Ikhlas mosque. By holding community service (PKM), the residents of Rubber Village will understand how to install electricity properly, correctly and safely. The equipment selected for installation in an electrical installation must meet applicable standards and must be suitable for its environment. Installation of equipment must comply with the provisions in PUIL, and match the equipment manufacturer's instructions. Electrical installations must be regularly inspected and tested for misuse, damage or poor installation, including loose connections. To protect against leakage currents, an ELCB can be installed. In order to achieve an increase in public knowledge and understanding about the importance of electrical hazards, this activity needs to be sustainable.

Style APA, Harvard, Vancouver, ISO itp.

10

Rios, Patricia, i Aquiles Negrete. "The object of art in science: science communication via art installation". Journal of Science Communication 12, nr 03 (11.12.2013): A04. http://dx.doi.org/10.22323/2.12030204.

Pełny tekst źródła

Streszczenie:

Science is part of our everyday live; so is art. Some art installations that link the two require the active presence of the spectator. Thereby they help to raise the awareness, promote understanding, and generate an emotional response from the public. This project rests on the public participation model that seeks to explore the connection between art installations and science communication through experiential learning. In order to test the effectiveness of an art installation communicating science two groups were contrasted. The first was exposed to a list of scientific facts; the second participated in the creation of an art installation. The results of this research suggest that art installations do promote long-term fact retention. Therefore, the use of art installations can be considered an interesting method of conveying science in an attractive, reliable, and memorable way.

Style APA, Harvard, Vancouver, ISO itp.

11

Golisz, Ewa, Krzysztof Korpysz, Olga Rutkowska, Szymon Głowacki i Andrzej Bryś. "Efficiency analysis of photovoltaic systems". E3S Web of Conferences 154 (2020): 05003. http://dx.doi.org/10.1051/e3sconf/202015405003.

Pełny tekst źródła

Streszczenie:

The goal of the study was to analyse the efficiency of two existing photovoltaic micro-installations with the power of approx. 40 kWp. The main factor differing the two installations being analysed was the arrangement of modules in relation to the sides of the world, one is south-west and the other is east-west. The total yield of electrical energy in 2017 from the south-west installation was higher and amounted to 34980 kWh. For the east-west installation the amount of energy generated was equal to 31180 kWh. 4 methods of forecasting electrical energy yield were discussed. Simple computational method proved to be the best method for both installations.

Style APA, Harvard, Vancouver, ISO itp.

12

Sobiech, Marian. "The safe use of building installations". Bulletin of the Military University of Technology 66, nr 2 (3.07.2017): 55–65. http://dx.doi.org/10.5604/01.3001.0010.1889.

Pełny tekst źródła

Streszczenie:

The article describes the issues of technical solutions to contemporary installations used in modern buildings. Technical characteristics of installation systems refer to various sources of heat for building heating and domestic hot water. Description of the technical installation solutions also presents available materials, such as pipes, shutoff valves, regulatory, safety, control and measurement, as well as circulation pumps. In reference to the applicable installation materials there are presented potential threats in operation of the system in the case of the absence of professional service and maintenance during building exploitation. Keywords: construction, heating and ventilation installations, exploitation, operating and maintenance, use

Style APA, Harvard, Vancouver, ISO itp.

13

Nikolsky, Oleg, Vadim Faranosov, Dmitry Surinsky i Evgeniy Uskov. "Multicriteria assessment of anthropogenic risk of electrical installations based on simulation modeling". АгроЭкоИнфо 1, nr 61 (5.02.2024): 5. http://dx.doi.org/10.51419/202141105.

Pełny tekst źródła

Streszczenie:

Risk management in a human-machine system is considered. The basic models and methods of decision-making, “man - electrical installation - environment” are presented. The method of risk analysis is considered. An expert software complex is proposed that implements the risk assessment of electrical installations. Keywords: HUMAN-MACHINE SYSTEM, RISK MANAGEMENT, ELECTRICAL INSTALLATION, MULTICRITERIA ANALYSIS, RISK ANALYSIS METHOD, “BOW TIE”, FIRE RISK OF ELECTRICAL INSTALLATIONS, SIMULATION MODEL

Style APA, Harvard, Vancouver, ISO itp.

14

Kurniasih, Novi. "Pelatihan Instalasi Penerangan Untuk Mahasiswa Teknik Elektro". TERANG 2, nr 2 (29.06.2020): 126–36. http://dx.doi.org/10.33322/terang.v2i2.429.

Pełny tekst źródła

Streszczenie:

The training of lighting installations for electrical engineering students is intended to provide an understanding of the electricity dangers and skills in terms of installing lighting installations that comply with PUIL standards. With the training of this lighting installation, it can help electrical engineering students to install and repair electrical installations independently even with having these skills can make those students open business opportunities so that employment opportunities will be open and at least they will have income for themselves. This training is given in two stages, namely the stage of supply material and the material testing phase, both theoretically and practically. With this training, the trainees are expected to understand well about the electricity dangers and how to secure it, read installation drawings, measure voltage, detect broken connections, and can make lighting installations using various switches and sockets that comply with the standards and conditions in PUIL and SPLN. In designing and installing electrical installations systems must be considered about human safety, other living things and the security of property from harm and damage that can be caused by the use of electrical installations. Through the Community Partnership Program, electrical engineering lecturer team of IT–PLN felt to need to conduct community training which is currently only focused on electrical engineering students of Pertamina University, by providing knowledge about lighting installation engineering skills. By utilizing experts in the electrical engineering department of IT–PLN, it is expected to be able to add skills and knowledge to electrical engineering students of Pertamina University. The trainees are expected to have an understanding of the electricity theory, the dangers of electricity and how to deal with it and have a strong desire to obtain theoretical and practical knowledge about electrical lighting installation techniques.

Style APA, Harvard, Vancouver, ISO itp.

15

Sukamdi, Anang Dasa Novfowan, Mochammad Mieftah, Rachmat Sutjipto i Dhimas Dhesah Kharisma. "Instalasi Listrik Penerangan Untuk Masyarakat Binaan Disnaker Di Pemkot Malang". Elposys: Jurnal Sistem Kelistrikan 7, nr 3 (17.02.2023): 45–50. http://dx.doi.org/10.33795/elposys.v7i3.667.

Pełny tekst źródła

Streszczenie:

This study discusses the installation of lighting electrical installations that are appropriate and safe for the communityassisted by the Manpower Office in Malang City Government. The existence of this research is expected to provide additional skills ininstalling lighting installations, to be used in working to install lighting installations that are correct and safe and in accordance withstandards, so as to minimize work hazards or accidents due to errors due to installation and use. This research activity was carried out inthe AK Building of Malang State Polytechnic, Jalan Soekarno Hatta Malang by Malang State Polytechnic. The research activity forlighting electrical installations was carried out using a direct practice method. These activities are the introduction of standard electricalinstallation equipment according to PUIL; Introduction of lighting equipment components such as lamps, switches, contact boxes; andInstallation of fittings, contact boxes, pipes, cables, switches. From the results of the research which was carried out for several days, theresults obtained were knowing the practical theory of lighting installation; know the use of PPE properly; know the components of thelighting installation; know the electric measuring instruments; knowing how to install lighting installation components correctly and safely;know what things are done before the object is connected to a power source; and can take measurements when the object has beenconnected to a power source.

Style APA, Harvard, Vancouver, ISO itp.

16

Yanto, Doni Tri Putra, Mukhlidi Muskhir, Erita Astrid i Ricky Maulana. "Peningkatan Kompetensi Pemuda melalui Pelatihan Pemasangan dan Pemeliharaan Instalasi Listrik Rumah Sederhana". JTEV (Jurnal Teknik Elektro dan Vokasional) 7, nr 2 (2.09.2021): 345. http://dx.doi.org/10.24036/jtev.v7i2.114872.

Pełny tekst źródła

Streszczenie:

This study reveals the improvement of community competence, especially youth after participating in the Installation and Maintenance training program for Simple House Installations in Padang City. The competence in question is the ability in the field of installation and maintenance of simple house installations at the household level in the community. The increase in the ability of the training participants is measured using a research instrument in the form of a Performance Assessment Rubric that has gone through a validation process. The research data were analyzed by percentage analysis and interpreted with an improvement table to get the level of improvement achieved. The research subjects were as many as 15 trainees who were representatives of members of the youth organizations of each sub-district in the city of Padang. The results showed that the average participants experienced an increase in the installation and maintenance of simple home electrical installations after participating in training activities where the increase was at a very high level (total average = 83.32). Thus, it can be concluded that the training program held was able to improve the competence of youth youth organizations in the city of Padang in the field of installation and maintenance of simple house installations.

Style APA, Harvard, Vancouver, ISO itp.

17

Kartika Sekarsari, Heri Kusnadi, Sunardi i Oky Supriadi. "Pemberdayaan Masyarakat di Wilayah Benda Baru Melalui Pelatihan Instalasi Listrik Rumah Tangga". Dinamisia : Jurnal Pengabdian Kepada Masyarakat 4, nr 3 (31.08.2020): 426–33. http://dx.doi.org/10.31849/dinamisia.v4i3.4016.

Pełny tekst źródła

Streszczenie:

The Community empowerment through an activity related to the provision of specific skills can support its independence. Technical training of simple home electrical installation is one form of Community Service (PKM) which contributes to supporting independence in the community, especially residents who live on Jln. H. Nurleman Benda Baru Pamulang, South Tangerang City. Training in the form of community independence for simple home electrical installations is taught through learning material related to electricity, K3, and the implementation of electrical installation practice using training modules that have been prepared. There is a curiosity about knowledge related to electricity, good understanding of knowledge, agility and skill in mastering the practice of electrical installations according to procedures, and having a cautious attitude in the installation of electrical installations will be the main capital for a person to be an entrepreneur. This can also be a solution for the lack of orderly installation of electricity in residential homes

Style APA, Harvard, Vancouver, ISO itp.

18

SCHÄFER, SABINE, i JOACHIM KREBS. "Sound – Time – Space – Movement: the Space-soundInstallations of the artist-couple 〈sabine schäfer // joachim krebs〉". Organised Sound 8, nr 2 (sierpień 2003): 213–25. http://dx.doi.org/10.1017/s1355771803000128.

Pełny tekst źródła

Streszczenie:

This article describes the theories and practices of the German installation artists and composers Sabine Schäfer and Joachim Krebs. Much of their work concerns site-specific sound installations involving the articulation of time and space. Their principal work methods and materials are described. In addition, they have formulated a typology of five installation types which they describe using their own installations as examples. Each installation type responds to a particular set of aesthetic and practical challenges both for the artists and the visitors. These are discussed and illustrated in the article. The typology extends beyond the specific work of these artists and can be applied to installations in general, thus providing a framework for critical analysis. Furthermore, the translators have discussed the issues regarding the specialised vocabulary of the artists and the rendering of such language into English.

Style APA, Harvard, Vancouver, ISO itp.

19

Rauf, Abdul, Belly Yan Dewantara i Istiyo Winarno. "Design of Protection Relay Prototype Against Arduino Uno Overload Interference in Electrical Installations". Fidelity : Jurnal Teknik Elektro 5, nr 3 (30.09.2023): 168–74. http://dx.doi.org/10.52005/fidelity.v5i3.168.

Pełny tekst źródła

Streszczenie:

Electrical installations are prone to disturbances, both short circuits and overloads, for this reason protection is needed in home electrical installations. MCB or mini circuit breaker is generally widely used as protection in electrical installations how the MCB works. When there is an overload disturbance, the MCB will cut off the electric current flowing in the electrical installation. In this study, researchers will create a prototype that will detect overload disturbances that occur in electrical installations. The advantage of developing this prototype is that the flow can be monitored. The prototype consists of Arduino ATmega 328, ACS712 sensor, relay, push button. The way this tool works is when there is a disturbance in the electrical installation the ACS712 sensor will detect a current which will then send the signal to the Arduino and the relay. The current value will be displayed on the LCD screen. This prototype contributes an overload protection equipped with current monitoring which can later be used by household applications.

Style APA, Harvard, Vancouver, ISO itp.

20

Goldman, Jonathan. "Installations". Circuit: Musiques contemporaines 17, nr 3 (2007): 5. http://dx.doi.org/10.7202/017584ar.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Sikora, Roman, Przemysław Markiewicz i Wiesława Pabjańczyk. "The Active Power Losses in the Road Lighting Installation with Dimmable LED Luminaires". Sustainability 10, nr 12 (12.12.2018): 4742. http://dx.doi.org/10.3390/su10124742.

Pełny tekst źródła

Streszczenie:

In accordance with the requirements of PN EN 13201-5 standard for road lighting installation, energy performance indicators should be descripted. In order to calculate energy performance indicators, it is necessary to know the active power of the road lighting system. The above standard does not specify whether active power losses should be taken into account in calculations. The main purpose of the article is to estimate the active power losses in the road lighting installation. The article presents methods for calculating active power losses, taking into account losses in all main elements of the installation. The obtained calculation results show the relationship between active power losses and the power of luminaires, their number and spacing between poles. Calculations of active power losses were made for single-phase and three-phase installations. The active power losses in a three-phase system do not exceed 1.5% and in a single-phase installation they may be greater than 7%. Therefore, in order to obtain exact values of energy performance indicators (and also predict electricity consumption), active power losses should be taken into account in calculations. In addition, a comparative analysis of the effect of luminaires dimming and active power losses on annual CO2 emissions was made. Not taking into account the active power losses in the calculation of the lighting installation’s power, for single-phase installations in particular, understates the calculated value of CO2 emissions by more than 6%.

Style APA, Harvard, Vancouver, ISO itp.

22

Węgierek, Paweł, i Justyna Pietraszek. "Analysis of electricity generation efficiency in photovoltaic building systems made of HIT-IBC cells for multi-family residential buildings". Open Physics 17, nr 1 (15.06.2019): 307–12. http://dx.doi.org/10.1515/phys-2019-0032.

Pełny tekst źródła

Streszczenie:

Abstract The purpose of this article is to analyze the efficiency of electricity generation in photovoltaic systems located on the building made on the basis of HIT-IBC cells for multi-family residential buildings. The comparative analysis of the efficiency of electricity generation by photovoltaic (PV) installations made of two cell types -Heterojunction with Intrinsic Thin-layer-Interdigitated Back Contact (HIT-IBC) and classical mono-crystalline silicon (mono-Si) - showed that the efficiency of HIT-IBC cells is 60% higher. These cells were selected for use as photo-voltaic systems located on the building to cover the demand for electricity through an exemplary multi-family residential building, consisting of 35 apartments divided into two, three and four-person households. Considering the previous calculations, in which it was shown that a PV installation made of HIT-IBC cells (PV1) is able to generate 192,75 kWh/(m2·y), annual electricity production was calculated by the indicated photovoltaic installation. It was found that the photovoltaic installation located on the roof of the building, based on HIT-IBC cells, will allow to cover the total electricity demand by a selected multi-family building. In addition, the installation’s payback period of 9 years was calculated, which takes a high place in the lifespan of photovoltaic installations of 20-25 years and thus ensuring the economic efficiency of the adopted technical solutions.

Style APA, Harvard, Vancouver, ISO itp.

23

Tukhvatullin, Midhat, Yuri Arkhangelsky, Rustam Aipov i Eduard Khasanov. "Materials and Economic Aspects of Designing Microwave Electrical Installations". Mathematical Modelling of Engineering Problems 9, nr 2 (28.04.2022): 336–42. http://dx.doi.org/10.18280/mmep.090206.

Pełny tekst źródła

Streszczenie:

Ultrahigh-frequency electro-technical installations are capable of performing thermal microwave modification of dielectric and non-thermal microwave modification of polymer materials and products, as a result of which new properties and parameters appear in the object processed in the working chamber of such an installation. When designing microwave electrical installations, it is necessary to consider the relationship between the dielectric parameters of the processed object and the parameters of the microwave electromagnetic field of the working chamber of the installation. The paper considers the influence of the parameters of the processed dielectrics on the synthesis of working chambers of microwave electrical installations and mathematical modelling of heat treatment in a microwave electromagnetic field, the structure and parameters of the installation on its economic efficiency. Consideration of the materials science and economic aspects of microwave electrical technology allows to accelerate and reduce the cost of design in microwave electrical technology.

Style APA, Harvard, Vancouver, ISO itp.

24

Golubyatnikov, Oleg O., i Evgeny I. Akulinin. "OPTIMAL DESIGN OF RESOURCE-SAVING ADSORPTION UNITS FOR HYDROGEN RECOVERY ON BLOCK ADSORBENTS". Bulletin of the Saint Petersburg State Institute of Technology (Technical University) 66 (2023): 108–17. http://dx.doi.org/10.36807/1998-9849-2023-66-92-108-117.

Pełny tekst źródła

Streszczenie:

The paper presents a new approach to the design of resource-saving pressure swing adsorption (PSA) installations for hydrogen recovery, which ensures a safe flow rate in the frontal layer of the block adsorbent using optimal programs for multi-stage smooth opening of the valves of the installation. The safe flow rate of 0.3 m/s was determined experimentally, which practically eliminates the abrasion of the adsorbent during the PSA process. An iterative algorithm was proposed to reduce the problem of optimal installation design to the problem of nonlinear programming. A number of optimization problems of design of the installation with a capacity of 100-4000 l/min STP and a hydrogen purity of 99.99%+ were solved using the example of a hydrogen 4-bed 4-step vacuum PSA. The optimal combinations of mode and design parameters of the PSA installation and the trends of their changes depending on capacity were determined. An exhaustive comparative analysis of PSA installations designed according to a new and traditional approach was carried out. It was found that installations designed according to the new approach secure a greater profit from hydrogen production by an average of 28.3% due to lower energy consumption for hydrogen production and weight and size characteristics (the length of the adsorbent layer and the inner diameter of the adsorber) compared to installations that are designed according to the traditional approach

Style APA, Harvard, Vancouver, ISO itp.

25

Olczak, Piotr, Małgorzata Olek, Dominika Matuszewska, Artur Dyczko i Tomasz Mania. "Monofacial and Bifacial Micro PV Installation as Element of Energy Transition—The Case of Poland". Energies 14, nr 2 (18.01.2021): 499. http://dx.doi.org/10.3390/en14020499.

Pełny tekst źródła

Streszczenie:

The several government subsidies available in Poland contributed to an increased interest in PV installations. Installed PV capacity increased from 100 MW in 2016 up to 2682.7 MW in July 2020. In 2019 alone, 104,000 microinstallations (up to 50 kWp) were installed in Poland. The paper determines the energy gain and the associated reduction of CO2 emissions for two types of solar installation located in Poland. The monofacial solar modules with a power of 5.04 kWp (located in Leki) and bifacial solar modules with a power of 6.1 kWp (located in Bydgoszcz). Both installations use mono-crystalline Si-based 1st generation PV cells. With comparable insolation, a bifacial installation produces approx. 10% (for high insolation) to 28% (for low insolation) more energy than a monofacial PV installation. Avoided annual CO2 emission in relation to the installation capacity ranges from 0.58 to 0.64 Mg/kWp for monofacial and from 0.68 to 0.74 Mg/kWp for bifacial and is on average approx. 16% higher for bifacial installations. Cost-benefit analyses were made. For different electricity prices, the NPV for monofacial and bifacial was determined.

Style APA, Harvard, Vancouver, ISO itp.

26

rudi, jøran. "‘from a musical point of view, the world is musical at any given moment’: an interview with bill fontana". Organised Sound 10, nr 2 (sierpień 2005): 97–101. http://dx.doi.org/10.1017/s1355771805000737.

Pełny tekst źródła

Streszczenie:

bill fontana is an american composer and artist who has been working with large-scale sound installations since the 1970s. in his installations he recontextualises sounds by transmitting them from one location to another, and uses the transported sounds as acoustical ‘overlay’, masking the sounds naturally occurring in the installation spaces. his installations often occur in central urban environments, and he has, for example, been commissioned in conjunction with the fifty-year anniversary of d-day (1994, paris), and the 100-year anniversary of brooklyn bridge (1983, new york city).

Style APA, Harvard, Vancouver, ISO itp.

27

RøNNINGEN, ODD. "Milkline vacuum stability in milking machine installations". Journal of Dairy Research 69, nr 4 (listopad 2002): 501–9. http://dx.doi.org/10.1017/s0022029902005812.

Pełny tekst źródła

Streszczenie:

Transient vacuum drops in the milkline during one ordinary milking were recorded as a measure of vacuum stability in milking installations on 184 Norwegian dairy farms in the summer of 1997. An association between the frequency of vacuum drops and technical data including milkline diameter, length and slope, number of milking units and effective reserve was demonstrated. The direct connection between the transient vacuum drop and its cause could be established for most drops during milking observations. A high frequency of transient vacuum drops in the milkline was associated with a high level of mastitis and a high new infection rate as inferred from changes in somatic cell counts for individual cows. The frequency of vacuum drops during one milking is only a rough indication of the long-term vacuum stability in a specific installation, and must be interpreted with care. The dimensions and slope of the milkline and the effective reserve probably give as good information about the installation's ability to maintain a stable vacuum.

Style APA, Harvard, Vancouver, ISO itp.

28

Basanta, Adam. "Extending Musical Form Outwards in Space and Time: Compositional strategies in sound art and audiovisual installations". Organised Sound 20, nr 2 (7.07.2015): 171–81. http://dx.doi.org/10.1017/s1355771815000059.

Pełny tekst źródła

Streszczenie:

Sound and media installations are rarely considered from a time-based, formal perspective. In order to enable a greater understanding of temporal form in sound installations, I suggest a cross-disciplinary adaptation of musical form to the installation context. Due to the differences between concert and installation presentation practices – including, but not limited to, the increased agency of the mobile visitor – I re-examine form in installation contexts as the particular temporal experience co-produced by the first-person subject as they navigate in, through and out of the work’s frame. By applying this musical perspective to macro-scale formal structures, a set of tools and concepts become available for the analysis of temporal form in existing sound or audiovisual installations. Using practice-based observation and analysis, I describe several compositional strategies through which musical concepts of material and form can be extended in space and time: each of these strategies provides means with which to shape or constrain the visitor’s co-production of experiential form. Finally, I discuss several strategies that can be used for the creation of large-scale form, with particular reference to algorithmic design principles used in my recent audiovisual installation, Room Dynamics.

Style APA, Harvard, Vancouver, ISO itp.

29

Kut, Paweł, i Katarzyna Pietrucha-Urbanik. "Most Searched Topics in the Scientific Literature on Failures in Photovoltaic Installations". Energies 15, nr 21 (31.10.2022): 8108. http://dx.doi.org/10.3390/en15218108.

Pełny tekst źródła

Streszczenie:

Photovoltaic installations (PVs) are currently one of the fastest-growing sources of renewable energy. Expanded forms of financial support and higher electricity prices have resulted in a large increase in its installed capacity. PV installations are increasingly being ordered by industry and privates, often for installations capacity of several hundred kilowatts. In addition to the advantages, photovoltaic installations also have drawbacks. One of these is that the increase in the voltage in the power grid leads to the exclusion of individual installations from the grid. An important issue in the operation of photovoltaic installations is also their reliability during their lifetime. The reliability of photovoltaic installations depends on the random nature of the cloud cover as well as the material’s mechanical degradations. This paper presents a literature analysis using Citespace software in terms of reliability. A detailed bibliometric analysis has been performed to outline the main drawbacks of the PV installations cited by researchers. This literature review forms the basis for further analysis. The paper also presents a new approach to implementing the Multiple-Criteria Decision Analysis (MCDA) method for assessing the risk of failure of PV panels. The obtained results showed the main interests of scientists in the field of failure analysis of photovoltaic installations and countries having the largest share in research on this issue. The applied Analytic Hierarchy Process (AHP) analysis enables supporting the process of managing photovoltaic installations by analyzing installation operations in terms of reliability as reliability impacts the profitability of investments and operating costs. The proposed method can be used by the operators of photovoltaic installations or farms.

Style APA, Harvard, Vancouver, ISO itp.

30

Kaczmarzewski, Sylwester, Piotr Olczak i Artur Halbina. "Issues of photovoltaic installation size choice for a hard coal mine". E3S Web of Conferences 123 (2019): 01014. http://dx.doi.org/10.1051/e3sconf/201912301014.

Pełny tekst źródła

Streszczenie:

Poland is the leader in hard coal mining in the European Union and in generation of electricity on this basis, it is related also to low generation of energy from renewable energy sources, in particular photovoltaic installations. The paper analyses the potential of PV installations application for the needs of a selected hard coal mine from the Upper Silesian Coal Basin. Using the hourly data on its electricity consumption in 2018 various sizes of PV installations were selected, a simple payback period was calculated as well as the percentage of energy from the installation use for the current mine operations. It has been shown that in the case of a mine, having available 20 MW of ordered power and average consumption of approx. 14 MW, an installation of 20 MWp rating covers approx. 15% of the electricity demand per year, while for 1 o’clock p.m., i.e. the hour at which most frequently the peak consumption occurred, the share in electricity demand coverage by the PV installation of this power on average amounts to approx. 50% per year.

Style APA, Harvard, Vancouver, ISO itp.

31

Peker, Nilüfer. "Agricultural production and installations in Byzantine Cappadocia: a case study focusing on Mavrucandere". Byzantine and Modern Greek Studies 44, nr 1 (19.02.2020): 40–61. http://dx.doi.org/10.1017/byz.2019.23.

Pełny tekst źródła

Streszczenie:

While there has been extensive research conducted on Byzantine religious architecture in Cappadocia, little work has been done on agricultural installations there. The valley of Mavrucandere in Cappadocia contains a settlement which has a remarkable agrarian installation complex. Resembling a factory, this area highlights the architectural and the organizational structure of the wine-presses in Cappadocia. In the light of the new findings, this article aims to examine the organization of the wine-making process, the location of the installations in the settlement, and the importance of the installations for the region's trade activities during the Byzantine period.

Style APA, Harvard, Vancouver, ISO itp.

32

Carretero-Ayuso, Manuel J., Gonzalo Sánchez-Barroso, Jaime González-Domínguez i Justo García-Sanz-Calcedo. "Failure Modes in Electricity and Telecommunication Facilities in Dwellings in Spain". Applied Sciences 11, nr 11 (6.06.2021): 5274. http://dx.doi.org/10.3390/app11115274.

Pełny tekst źródła

Streszczenie:

The value of a house depends not only on the quality of the construction elements but also on the functionality of its installations. Making mistakes during the design and even execution phases of installations in newly built homes is common. This paper determines, catalogues, and quantifies faults in electrical and telecommunications installations in dwellings based on owners’ complaints and using the ‘learning from faults’ philosophy. To this end, 154 complaints concerning these installations in all of Spain were analyzed and protocolized. The results show that, in all types of dwellings, the most common fault was ‘alterations and malfunctions’ (81%), followed by ‘incorrect or lack of placement of elements’ (14%). The pathological origin with the greatest presence in the research was ‘shortcomings and omissions in the installation’ (40%) and ‘anomalies in the installation’ (36%). Moreover, all functional deterioration processes as well as the type of dwelling where each of these parameters occurred most were defined and quantified (association between each fault and its cause). Finally, the ‘probability factor’ (PF) was determined, which numerically quantifies the probable existence of complaints according to four ranges. The results will pave the way for more precise inspections during the construction phase.

Style APA, Harvard, Vancouver, ISO itp.

33

Mustafayev, Vahid T., i Chingiz R. Nasirov. "Analysis of the influence of wave loads on offshore installations". Nafta-Gaz 80, nr 2 (luty 2024): 91–95. http://dx.doi.org/10.18668/ng.2024.02.03.

Pełny tekst źródła

Streszczenie:

Given that the loads affecting offshore installations exhibit a broad range of variability in both temporal and spatial parameters, these loads are among the least studied components in the consideration of offshore installations as integrated systems. The existing calculation models and approaches used in design are rather conditional. When determining loads affecting offshore installations, the most common error is the description of loads in terms of time parameters, which lead to a distortion of the dynamic behavior of offshore installations. This is primarily because dynamic effects on the structure clearly demonstrate feedback between the influence of loads and the system itself. These loads can be classified as external and internal. Internal loads include loads from installation and construction processes, as well as loads from auxiliary and technological equipment, and external loads include ice, seismic, snow and wind loads. There are several approaches to solving problems related to the impact of wind waves on offshore installations. For this reason, an analysis and comparison of these methods were conducted to improve modeling process of offshore installations. Taking into account the impact of wave loads is a critical aspect of in developing the calculation model for the operational assessment of the residual resource of offshore installations.

Style APA, Harvard, Vancouver, ISO itp.

34

Galla, Stanislaw, i Miroslaw Wlas. "The Influence of a Photovoltaic Micro-Installation on the Low-Frequency Parameters of Electricity at PCC and Its Impact on the Thermal Characteristics of Selected Devices". Energies 14, nr 9 (21.04.2021): 2355. http://dx.doi.org/10.3390/en14092355.

Pełny tekst źródła

Streszczenie:

This manuscript illustrates the measurement results of parameters describing the quality of energy at the PCC (point of common coupling) of a photovoltaic micro-installation that can significantly affect devices in the same power grid. The analyses reflecting heating of selected devices used in domestic installations, which were performed in an isolated laboratory environment, are also indicated. The conducted study aimed at checking the thermal characteristics of the chosen equipment, i.e., AC/DC power supply, LED and fluorescent light sources, a step-down transformer at synergistically higher voltage harmonics and constant component in the network voltage. The tests were carried out at the disturbance levels recorded at the site of the photovoltaic micro-installation. The conducted tests aimed at indicating the presence of an increased level of synergetic disturbances in the vicinity of micro-photovoltaic installations. Based on the research, recommendations were made for photovoltaic micro-installations.

Style APA, Harvard, Vancouver, ISO itp.

35

Knežević, Predrag, Ivan Božić i Bogdan Ristić. "Modeliranje i izrada Pelton turbine sa dva mlaznika za potrebe novoformirane laboratorijske instalacije". Energija, ekonomija, ekologija 23, nr 2 (2021): 35–38. http://dx.doi.org/10.46793/eee21-2.35k.

Pełny tekst źródła

Streszczenie:

After surveying the existing teaching and research installations with Pelton turbines worldwide, it was concluded that there are no appropriate laboratory installations with a two- nozzle-Pelton turbine. Therefore, the design, techno-economic analysis and construction of one such laboratory installation have been conducted, where all the necessary energy characteristics of Pelton turbines will be tested. This adaptable installation can be used for various researches in order to determine numerous influential geometrical parameters with the aim of optimizing the construction of such type of hydraulic turbines. In addition to presenting the conceptual solution of the installation, the modeling and production of vital parts of the Pelton turbine, applying modern engineering recommendations and techniques are given in the paper.

Style APA, Harvard, Vancouver, ISO itp.

36

Steinmann, Peter, Martin W. Bratschi, Pallavi Lele, Uddhavi Chavan, Neisha Sundaram, Mitchell G. Weiss, Sanjay Juvekar i Siddhivinayak Hirve. "Availability and satisfactoriness of latrines and hand washing stations in health facilities, and role in health seeking behavior of women: evidence from rural Pune district, India". Journal of Water, Sanitation and Hygiene for Development 5, nr 3 (11.06.2015): 474–82. http://dx.doi.org/10.2166/washdev.2015.101.

Pełny tekst źródła

Streszczenie:

Water, sanitation and hygiene (WASH) installations are indispensable in health care facilities. Their quality might also influence the decision whether to visit a health facility. We investigated the WASH infrastructure in small health facilities in rural Pune, India, and surveyed expectations and satisfactoriness among women. The availability and quality of WASH installations was assessed in 12 facilities using a checklist. Dedicated questions in a household survey provided the community perspective, complemented by qualitative methods. A few public facilities had no latrine or hand washing station. On the contrary, all private facilities offered such installations. The bed/outpatient-to-installation ratio was also lower in private compared to public facilities. While most latrines were functional and well maintained, they often lacked garbage bins. Soap was often missing from hand washing stations. Dedicated latrines for women were rare. Women were generally satisfied with the WASH installations in the local health facility, but considered private facilities as better. WASH installations in health facilities are generally acceptable in private facilities while improvements are needed in some government facilities. Women expect WASH installations in health facilities, and view their quality in a broader framework of ‘cleanliness,’ which they consider when choosing facilities.

Style APA, Harvard, Vancouver, ISO itp.

37

Triwijaya, Santi, Andri Pradipta, Fathurrozi Winjaya, Akhwan Akhwan i Trisna Wati. "PENINGKATAN KOMPETENSI MELALUI PELATIHAN INSTALASI LISTRIK DALAM DIKLAT PEMBERDAYAAN MASYARAKAT". JMM (Jurnal Masyarakat Mandiri) 7, nr 1 (1.02.2023): 876. http://dx.doi.org/10.31764/jmm.v7i1.12808.

Pełny tekst źródła

Streszczenie:

Abstrak: Teknisi yang tidak memiliki kualifikasi di bidang instalasi listrik dapat menghasilkan instalasi yang tidak aman. Untuk mengatasi kondisi tersebut diperlukan peningkatan keterampilan dari teknisi instalasi listrik melalui pendidikan non formal berbasis pada pengabdian kepada masyarakat (PKM) yaitu Diklat Pemberdayaan Masyarakat (DPM) Instalasi listrik. Tujuan dari pelaksanaan PKM adalah menghasilkan sumber daya manusia yang memiliki kualifikasi dalam bidang instalasi listrik. Peserta DPM Instalasi Listrik pada bulan juni 2022 ada sejumlah 20 peserta dari SMK Negeri 1 Madiun yang berlangsung dari tanggal 20 Juni 2022 sampai dengan 22 Juni 2022. Evaluasi diklat dilaksanakan dengan pengamatan secara langsung kemampuan peserta untuk menghasilkan hasil instalasi listrik yang dapat menyalakan beban lampu. Rata-rata peningkatan kompetensi dari peserta diklat instalasi listrik adalah 29,5% dari 5 (lima) indikator pengamatan yaitu pengetahuan akan komponen peralatan instalasi listrik, fungsi setiap komponen, pengetahuan akan simbol komponen instalasi listrik, mampu membaca dan memahami wiring instalasi listrik, serta memiliki kompetensi dalam intalasi listrik. Abstract: Technicians who are not qualified in the field of electrical installations can result in unsafe and reliable installations. To overcome this condition, it is necessary to increase the skills of electrical installation technicians through non-formal education based on Pengabdian Kepada Masyarakat (PKM), namely Diklat Pemberdayaan Masyarakat (DPM) Instalasi listrik. The aim of implementing PKM is to produce qualified human resources in the field of electrical installation. There were 20 participants in the Electrical Installation DPM in June 2022 from SMK Negeri 1 Madiun which took place from June 20 2022 to June 22 2022. The training evaluation was carried out by directly observing the participants' ability to produce electrical installations that can light up the lamp. The average competency increase of electrical installation training participants was 29.5% as seen from 5 (five) observation indicators, namely knowledge of electrical installation equipment components, function of each component, knowledge of electrical installation component symbols, ability understand electrical installation wiring, and had competency in electrical installations.

Style APA, Harvard, Vancouver, ISO itp.

38

Neugebauer, Maciej, Jakub d’Obyrn i Piotr Sołowiej. "Economic Analysis of Profitability of Using Energy Storage with Photovoltaic Installation in Conditions of Northeast Poland". Energies 17, nr 13 (21.06.2024): 3075. http://dx.doi.org/10.3390/en17133075.

Pełny tekst źródła

Streszczenie:

This work presents an economic analysis of the use of electricity storage in PV installations, based on previously adopted assumptions, i.e., the type and location of the tested facility and comparative variants, divided into the share of the storage in the installation, and the billing system. The work takes into account the share of the energy shield and assumes a consumption limit of 2000 kWh. The cost of building the installation is based on July 2023 prices. The work assumes potential directions of changes in electricity prices, based on which the degree of investment profitability for a given price situation is determined. Depending on the adopted change in the direction of electricity prices, with a low price increase rate, for installations in the new billing system (net-billing), the optimal choice is an installation without energy storage with a power exceeding the actual energy demand. Assuming a high increase in electricity prices, the optimal choice is an installation with energy storage with an installation capacity exceeding the actual demand. For installations billed using the net-metering system, the optimal choice is an installation without storage with an appropriately selected installation power. This article shows how much you can gain after installing a PV installation and not only what costs must be incurred to complete the investment. Profit analysis will enable a more complete assessment of the profitability of investing in PV panels (with or without energy storage). It describes the verification of the profitability of a PV installation for a standard user depending on various types of settlements with the electricity supplier and the lack or installation of an energy-storage facility.

Style APA, Harvard, Vancouver, ISO itp.

39

Tuhvatullin, Midhat, Yuri Arkhangelsky, Rustam Aipov i Eduard Khasanov. "Ultra High-Frequency Electric Installation with a Hybrid-Type Working Chamber". Mathematical Modelling of Engineering Problems 8, nr 6 (22.12.2021): 937–44. http://dx.doi.org/10.18280/mmep.080613.

Pełny tekst źródła

Streszczenie:

Ultra-high frequency (UHF) electric installations, using the energy of UHF electromagnetic oscillations, can perform thermal UHF modification of dielectric materials and products. As a result, its properties and parameters change in an object processed in a UHF electromagnetic field faster and more uniformly than when the heat is transferred to a heated dielectric by thermal conductivity, convection, thermal radiation. The exact change in the properties and parameters of polymers of living and inanimate nature, uniform in volume and significantly in a shorter time spent in a UHF electromagnetic field, can be obtained in UHF electrical installations, and practically without heating the object as a result of the so-called non-thermal UHF modification. The paper proposes the design and design of a UHF electric installation with a hybrid-type working chamber. Such a working chamber makes it possible to simultaneously carry out non-thermal UHF modification of a polymer and thermal UHF modification of a dielectric in one installation. A UHF electric installation with a hybrid-type working chamber is cheaper. It takes up less space than two separate installations producing the same products with the same productivity.

Style APA, Harvard, Vancouver, ISO itp.

40

Cuan, Catie, Erin Berl i Amy LaViers. "Time to compile: A performance installation as human-robot interaction study examining self-evaluation and perceived control". Paladyn, Journal of Behavioral Robotics 10, nr 1 (28.08.2019): 267–85. http://dx.doi.org/10.1515/pjbr-2019-0024.

Pełny tekst źródła

Streszczenie:

AbstractEmbodied art installations embed interactive elements within theatrical contexts and allow participating audience members to experience art in an active, kinesthetic manner. These experiences can exemplify, probe, or question how humans think about objects, each other, and themselves. This paper presents work using installations to explore human perceptions of robot and human capabilities. The paper documents an installation, developed over several months and activated at distinct venues, where user studies were conducted in parallel to a robotic art installation. A set of best practices for successful collection of data over the course of these trials is developed. Results of the studies are presented, giving insight into human opinions of a variety of natural and artificial systems. In particular, after experiencing the art installation, participants were more likely to attribute action of distinct system elements to non-human entities. Post treatment survey responses revealed a direct relationship between predicted difficulty and perceived success. Qualitative responses give insight into viewers’ experiences watching human performers alongside technologies. This work lays a framework for measuring human perceptions of humanoid systems – and factors that influence the perception of whether a natural or artificial agent is controlling a given movement behavior – inside robotic art installations.

Style APA, Harvard, Vancouver, ISO itp.

41

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 41, nr 1 (2016): 170–81. http://dx.doi.org/10.3406/rjenv.2016.6963.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Hill, D. "Green installations". IEE Review 44, nr 3 (1.05.1998): 134. http://dx.doi.org/10.1049/ir:19980307.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Grin’, N. P. "Milking installations". Chemical and Petroleum Engineering 33, nr 6 (listopad 1997): 694–95. http://dx.doi.org/10.1007/bf02430311.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 20, nr 1 (1995): 160–67. http://dx.doi.org/10.3406/rjenv.1995.5137.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 20, nr 3 (1995): 502–13. http://dx.doi.org/10.3406/rjenv.1995.5154.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 21, nr 1 (1996): 160–74. http://dx.doi.org/10.3406/rjenv.1996.3275.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Jaworski, Véronique. "Installations classées". Revue Juridique de l'Environnement 21, nr 4 (1996): 501–2. http://dx.doi.org/10.3406/rjenv.1996.4996.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 22, nr 1 (1997): 98–109. http://dx.doi.org/10.3406/rjenv.1997.3376.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Schneider, Raphaël. "Installations classées". Revue Juridique de l'Environnement 22, nr 4 (1997): 573–88. http://dx.doi.org/10.3406/rjenv.1997.3467.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Jaworski, Véronique. "Installations classées". Revue Juridique de l'Environnement 22, nr 2 (1997): 258–61. http://dx.doi.org/10.3406/rjenv.1997.5021.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Artykuły w czasopismach na temat „Installations”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych