Zaloguj się

Gotowe bibliografie tematyczne / Industry / Artykuły w czasopismach

Artykuły w czasopismach na temat „Industry”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Industry.

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 30 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Industry”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Yoshua Pramana Kawi, I Nyoman Putu Budiartha i Ni Made Puspasutari Ujianti. "Pengaturan Industri Permainan Interaktif Elektronik di Era Industri 4.0 Video Game Industry Regulation In 4.0. Industry Era". Jurnal Preferensi Hukum 3, nr 2 (30.04.2022): 253–59. http://dx.doi.org/10.55637/jph.3.2.4925.253-259.

Pełny tekst źródła

Streszczenie:

The video game industry has developed very significantly in the 4.0 industry era. Video game industry development also happened in Indonesia in the last two decades, making the government then feel the need to assign a system of regulation to the video game industry in Indonesia. However, a particular part of that said system, which is Regulation of Indonesia’s Esports Major Administrator Number 034/PB-ESI/B/VI/2021, caused some problems regarding its application in public. Therefore, the researcher is interested to study these problems by using the principles of the regulation-making process in the Republic of Indonesia’s Act Number 12 of 2011 and other related law sources. The purpose of this research is to know and understand the regulation of the video game industry and the application’s impact on the public. The research method is using the normative method with the law and conceptual approaches. The result is showing that the development of the video game industry in Indonesia should be controlled in a good regulation system and the implications must be handled seriously by those in charge to provide huge benefits for the country, especially for those working in the video game industry.

Style APA, Harvard, Vancouver, ISO itp.

2

Adi, Ginanjar Sasmito, Siti Kholifah, Noer Afni Arifanti i Erika Novarinda. "Safety Industry (Pencegahan K3 pada Industri Genteng)". Jurnal Pengabdian Teknologi Informasi dan Kesehatan (DIANKES) 1, nr 2 (30.06.2023): 68–75. http://dx.doi.org/10.47134/diankes.v1i2.14.

Pełny tekst źródła

Streszczenie:

Occupational health and safety is a method used to protect workers from accidents and occupational diseases. This occupational safety and health effort does not only apply to the industrial sector such as manufacturing, mining, construction, this also applies to the small industrial sector such as the tile-making industry. The purpose of this community service is to provide health education to tile industry workers related to health and work safety. This service activity was carried out at UD Genteng Baru Muncul Jember. The results of the community service carried out in the tile industry showed an increase in knowledge from the average pre-test was 12.7 and the post-test was 14 (the highest score was 15). Another result of this service shows that health complaints among tile industry workers are pain in the joints and back and fatigue due to heat and thirst, several other complaints that arise include cough, shortness of breath, visual and hearing impairment. Work accidents that have occurred to workers include machine injuries and falls. Occupational health and safety must be a concern for business owners with regard to providing a safe environment as well as appropriate personal protection and balanced by obedient behavior of workers in using the prescribed personal protection.

Style APA, Harvard, Vancouver, ISO itp.

3

Nugrowibowo, Setyo, i Mohammad Muslimin. "Smart Manufacturing: Latest Technologies And Applications In Industrial Engineering". Jurnal Minfo Polgan 12, nr 1 (19.04.2023): 305–10. http://dx.doi.org/10.33395/jmp.v12i1.12374.

Pełny tekst źródła

Streszczenie:

Penelitian ini mengkaji tentang kajian tentang teknologi terbaru smart manufacturing dan aplikasinya dalam teknik industry.. Penelitian yang digunakan oleh peneliti adalah Sistematic Literature Review dengan data yang diperoleh dari jurnal dan artikel penelitian dari tahun 2019-2023. Platform sumber data yang digunakan pada penelitian ini Google Scholar dan Sage Jounal. Hasil dari penelitian ini menunjukkan bahwasannya Smart Manufacturing (SM) atau Indusry 4.0 adalah istilah yang umumnya diterapkan pada peningkatan operasi manufaktur melalui integrasi sistem, menghubungkan kemampuan fisik dan siber, dan memanfaatkan informasi termasuk memanfaatkan evolusi data besar. Adopsi SM telah terjadi secara tidak merata di seluruh industri, sehingga ada peluang untuk melihat ke industri lain untuk menentukan solusi dan jalur peta jalan untuk industry. Keunggulan operasional setelah penerapan Industri 4.0 akan mencapai standar tingkat baru yang tidak terbayangkan dalam organisasi manufaktur tradisional karena penerapan manufaktur cerdas. Organisasi yang berkaitan dengan teknik industri akan berkontribusi pada pengurangan emisi lingkungan karena Industri 4.0 akan memantau tingkat emisi dan mengatur diri sendiri secara proaktif melalui sistem fisik siber untuk mengurangi dampak lingkungan. Bahaya dan aktivitas yang tidak aman secara ergonomis akan diotomatisasi dan oleh karena itu, kesehatan pekerja akan terjaga. Tidak hanya itu, implementasi dari Smart Manufacturing pada teknik industry akan berengaruh sgnifikan pada hasil dan proses produksi baik waktu, biaya hingga keberlanjutan.

Style APA, Harvard, Vancouver, ISO itp.

4

Hamzah, Hamzah. "Analisis sub sektor industri pengolahan unggulan di Provinsi Kepulauan Bangka Belitung". SOROT 15, nr 2 (5.10.2020): 75. http://dx.doi.org/10.31258/sorot.15.2.75-85.

Pełny tekst źródła

Streszczenie:

Penelitian ini bertujuan untuk mengidentifikasi jenis-jenis industri yang menjadi industri pengolahan unggulan di Provinsi Kepulauan Bangka Belitung. Alat analisis yang digunakan adalah analisis Location Quotient dan Analisis Shift Share. Hasil penelitian dari analisi LQ menunjukkan bahwa industri yang menjadi industri unggulan di Provinsi Kepulauan Bangka Belitung antara lain yaitu industri makanan dan minuman, industri karet, barang dari karet dan plastik, industri bahan galian bukan logam, serta industi logam. Sedangkan sub sektor industri pengolahan yang tidak unggul yaitu Industri Tekstil dan Pakaian Jadi, Industri Kayu, Barang dari Kayu, dan Gabus dan Barang Anyaman dari Bambu, Rotan, dan sejenisnya, Industri Kertas dan Barang dari Kertas, Percetakan dan Reproduksi Media Rekaman, Industri Barang Logam, Komputer, Barang Elektronik, Optik; dan Peralatan Listrik, Industri Furnitur, serta Industri Pengolahan Lainnya (Jasa Reparasi, dan Pemasangan Mesin, dan Peralatan). Penggabungan analisis LQ dan Shift Share menunjukkan hasil bahwa sub sektor industri pengolahan unggulan terdapat pada Industri Karet, Barang dari Karet, dan Plastik, karena memiliki 2 keunggulan sekaligus yaitu keunggulan komparatif dan keunggulan kompetitif.The purpose of this study is to identify the types of industries that are leading industries in the Bangka Belitung Islands Province. The analytical tool used is Location Quotient analysis and Shift Share Analysis. The results of the LQ analysis show that industries that are leading industries in the Bangka Belitung Islands Province include the food and beverage industry, the rubber industry, rubber and plastic goods, the non-metal mining industry, and the metal industry. While the manufacturing industry sub-sectors that are not superior are the Textile and Apparel Industry, the Timber Industry, Wood Products, and Cork and Woven Goods from Bamboo, Rattan, and the like, the Paper Industry and Paper Products, Printing and Reproduction of Recording Media, the Goods Industry Metals, Computers, Electronics, Optics; and Electrical Equipment, Furniture Industry, and Other Processing Industries (Repair Services, and Machine, and Equipment Installation). The merger of LQ analysis and Shift Share shows the results that the leading manufacturing sub-sector is found in the Rubber Industry, Rubber Products, and Plastics, because it has two advantages at once namely comparative advantage and competitive advantage.

Style APA, Harvard, Vancouver, ISO itp.

5

Santi Wahyuningsih, Wiwit. "Analisis Daya Saing Ekspor Sektor Unggulan di Jawa Tengah". Economics Development Analysis Journal 6, nr 2 (15.03.2018): 221–38. http://dx.doi.org/10.15294/edaj.v6i2.22220.

Pełny tekst źródła

Streszczenie:

Penelitian ini mengidentifikasi industri unggulan di Jawa Tengah yang mempunyai daya saing. Penelitian ini menggunakan data PDRB Jawa Tengah dan PDB Tahun 2010-2015, Tabel Input Output Jawa Tengah Tahun 2013, serta data Ekspor-Impor Jawa Tengah Tahun 1997-2015. Penelitian ini mengunakan alat analisis Indeks Daya Penyebaran (IDP), Indeks Derajat Kepekaan (IDK) dan Revealed Comparative Advantage (RCA). Dari hasil IDP dan IDK terdapat 9 industri unggulan di Jawa Tengah yaitu industri pengolahan dan pengawetan ikan, industri minyak dan lemak, industri penggilingan padi, industri tepung terigu dan tepung lainnya, industri makanan ternak, industri pemintalan, industri tekstil, industri kayu dan bahan bangunan dari kayu, serta industri karet dan barang dari karet. Hanya ada 3 industri yang memiliki daya saing ekspor tinggi yaitu industri dengan IDP>1, IDK>1 dan RCA>1 yang meliputi industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Dari penelitian ini dapat disimpulkan bahwa sektor industri yang dapat diandalkan untuk meningkatkan pertumbuhan ekonomi melalui ekspor dan memiliki daya saing ekspor yang sangat bagus serta memilki harga jual tinggi yaitu hanya industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Maka dari itu sebaiknya kebijakan pemerintah lebih ditekankan pada sektor hulu dan sektor hilir dari industri-industri tersebut. This research identify the leading manufactures in central Java which have the export competitiveness. This study used data of Central Java’s Gross Domestic Regional Product (GDRP) and Gross National Product (GNP) on 2010-2015, Input Output Table on 2013, as well as export-import on 1997-2015. This research rely on Forward Linkage Index (FLI), Backward Linkage Index (BLI) and Revealed Comparative Advantage (RCA) analysis tools. There are 9 leading manufacturing industries conducted from the result. Those manufactures are processing and preserving fish industry, oils and fats industry, rice milling industry, wheat flour industry, live and fock feeds industry, knitting industry, textile industry, wood and products of wood industry, and rubber and products of rubber industry. Only 3 industries that have the high export competitiveness. These industries have Forward Linkage Index (FLI)>1, Backward Linkage Index (BLI) >1, and RCA>1 consisting knitting industry, textile industry, and wood and products of wood industry. From this study, it can be concluded that the reliable manufacturing sectors to boot the economy growth through exports, having a good export competitiveness as well as high selling prices are those 3 industries. Therefore the emphasize of goverment policy should be on the upstream and down stream sectors of these industries.

Style APA, Harvard, Vancouver, ISO itp.

6

Utomo, Satrio, i Nugraheni Setiastuti. "INDUSTRI 4.0: PENGUKURAN TINGKAT KESIAPAN INDUSTRI TEKSTIL DENGAN METODE SINGAPORE SMART INDUSTRY READINESS INDEX". Jurnal Techno Nusa Mandiri 16, nr 1 (12.03.2019): 29–36. http://dx.doi.org/10.33480/techno.v16i1.114.

Pełny tekst źródła

Streszczenie:

The era of technology is disrupted at this time, better known as the Industrial Revolution 4.0, already been applied to a various field of each country. Industry 4.0 include Internet of Thing (IoT), Artificial Intelligence (AI), human-machine interface, 3-D printing, and Advanced Robotics. Industry 4.0 is expected to increase productivity, business efficiency, and competitiveness. Indonesia’s Ministry of Industry has designed ‘Making Indonesia 4.0’ by preparing a roadmap and strategy to meet industry 4.0. There are 5 (five) prioritize manufacturing industrial sectors: Food and Beverages, Textile and Apparel, Electronics, Chemical, and Automotive. For studies conducted in the textile and apparel industry, as one of the priority industries. The Research study was conducted to determine the level of readiness of the textile manufacturing industry to meet industry 4.0 based on aspects of Technology, Processes, and Organizations. The method used is The Singapore Smart Industry Readiness Index. By knowing this level of readiness, it will help the industry to know the position of the current level of readiness and what needs are needed to reach the level of industry 4.0. By knowing the position, is able to know the strengths and weaknesses of technology from the operational technology used, which then knows the technological priorities that are of concern by management to increase industrial competitiveness towards industrial level 4.0.Based on the results of the mapping, related to the level of readiness of the textile industry of PT. Grand Textile based on technological aspects (1.56), process aspects (1.33) and organizational aspects (2.00) amounted to 1.63; position at level 1 which is categorized as New Comer.

Style APA, Harvard, Vancouver, ISO itp.

7

Nahar Munny, Kamrun, Mostak Ahamed Galib i Ding Lin. "Scientists Collaborating with Industry: An Exploration of Industry Engagement Types". International Journal of Management Science and Business Administration 1, nr 8 (2015): 37–46. http://dx.doi.org/10.18775/ijmsba.1849-5664-5419.2014.18.1004.

Pełny tekst źródła

Streszczenie:

Involvement of researchers in industry is undeniably beneficial for companies. It drives innovations, patents, licenses and ultimately profits. However, participation of scientists in industry is still scarce. With the aim of emphasizing the benefits of scientific involvement in industry, we conducted a comprehensive exploration of various types of involvement. Contributions of scientists to industry sector comes through 5 types of collaboration encompassing: licensing, collaborative research, academic entrepreneurship, contract research and consulting. This kind of typology enables practitioners to see what collaboration type they may engage in and is optimal for their business needs.

Style APA, Harvard, Vancouver, ISO itp.

8

Tian, Zhaoqi. "Portfolio Optimization for Real Estate Industry, Food and Beverage Industry, Energy Industry, Medicine Industry, Finance Industry and Retail Industry in Chinese Capital Market". BCP Business & Management 30 (24.10.2022): 459–65. http://dx.doi.org/10.54691/bcpbm.v30i.2472.

Pełny tekst źródła

Streszczenie:

Creating a portfolio is one of the mainstream ways for investors to avoid risks. This paper focuses on Chinese investment market, and selects six different industries in A-shares, which are preferred by Chinese investors, i.e., real estate industry, food and beverage industry, energy industry, medicine industry, finance industry and retail industry. This paper selected six representative assets from these industries for analysis. This paper selects the closing price data of these six assets in the past year, simulates 10,000 different investment portfolios by Monte Carlo simulation, and then uses the mean variance model to select the maximum Sharpe ratio portfolio and the minimum volatility portfolio. After getting the weights of the two groups of assets, this paper used the real income data of nearly two months to test the performance of the portfolio. The results show that: In the maximum Sharpe Ratio portfolio, Poly Development accounted for the max proportion, which is 35.05%, however, Tongrentang accounted for the min proportion, which is only 0.26%. And in the minimum volatility portfolio, the max percentage is Tsingtao Brewery, which is 50.82%, while the min percentage is Chenguang, which is 0.84%. This research results have certain reference value for investors.

Style APA, Harvard, Vancouver, ISO itp.

9

HASHIMOTO, Hisayoshi. "Manufacturing Industry Strong Point of Japanese Industry and Chinese Industry". Journal of the Society of Mechanical Engineers 108, nr 1035 (2005): 92–95. http://dx.doi.org/10.1299/jsmemag.108.1035_92.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Singh, M. Bimolchandra. "Manipuri Film Industry". Journal of Advanced Research in Journalism & Mass Communication 05, nr 01 (27.02.2018): 25–30. http://dx.doi.org/10.24321/2395.3810.201805.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Karamina, Hidayati, Nugroho Aji Prasetiyo, Ariani Trisna Murti, Glorianus Glorianus i Avelinus Tampang. "IDENTIFIKASI LOGAM BERAT PADA LAHAN PERTANIAN DI SEKITAR INDUSTRI KERTAS DAN PULP KABUPATEN MALANG". Agrika 17, nr 2 (28.11.2023): 283. http://dx.doi.org/10.31328/ja.v17i2.4843.

Pełny tekst źródła

Streszczenie:

ABSTRAKSalah satu industri yang menghasilkan limbah cair yang mengandung logam berat adalah industri kertas dan pulp. Tujuan penelitian ini adalah untuk mengidentifikasi logam berat yang berada di lahan pertanian di sekitar industri kertas dan pulp di Kabupaten Malang. Penelitian dilaksanakan dengan mengambil beberapa sampel tanah dan air dilahan pertanian di sekitar industru tersebut. Penelitian dilaksanakan pada bulan Mei-Juni 2023. Hasil pengujian laboratorium menunjukkan bahwa logam berat ditemukan pada sampel tanah pada lahan pertanian di sekitar industri kertas dan pulp yaitu timbal (Pb) dengan kandungan sebesar 3064 mg/liter, yang melebihi nilai ambang batas, sedangkan kandungan Cadmium (Cd) (<0,0020 mg/liter) di bawah ambang batas, kandungan Corganik sedang dan pH tanah agak masam. Pada air limbah industri kertas dan pulp juga ditemukan kandungan Pb yang melebihi ambang batas, sedangkan kandungan Cd tidak melebihi nilai ambang batas. Hasil C Organik tanah masuk dalam kategori sedang dan untuk parameter pH H2O masuk dalam kategori agak masam. ABSTRACTOne of the industries that produces liquid waste containing heavy metals is the paper and pulp industry. The aim of this research is to identify heavy metals in agricultural land around the industry in Malang Regency. The research was carried out by taking several soil and water samples on agricultural land around the industry. The research was carried out in May-June 2023. Laboratory test results showed that heavy metals were found in soil samples on agricultural land around the paper and pulp industry, namely plumbum (Pb) with a content of 3064 mg/liter, which exceeds the threshold value, while the Cadmium (Cd) (<0.0020 mg/liter) is below the threshold, the C organic content is moderate and the soil pH is slightly acidic. In wastewater from the industry, it was also found that the Pb content exceeded the threshold value, while the Cd content did not. The soil C organic is in the medium category and the pH parameter H2O is in the slightly acidic category.

Style APA, Harvard, Vancouver, ISO itp.

12

Dewi, Yashinta Kumala, David Hehanussa i Arifuddin Akil. "Arahan Pengembangan Kawasan Industri Kota Sorong Berbasis Green Industry". Jurnal Penelitian Enjiniring 23, nr 2 (30.11.2019): 104–12. http://dx.doi.org/10.25042/jpe.112019.02.

Pełny tekst źródła

Streszczenie:

Sorong is a city that has been planned as an economic center that will serve Eastern Indonesia. This makes Sorong City planned as a Special Economic Zone (SEZ) based on the national spatial plan. The development that occurred in Indonesia is more dependent on economic aspects without looking at other aspects so that the need for industrial estate planning that not only involves economic aspects, but involves social aspects and environmental aspects. The purpose of this plan are: 1) know the current location of industrial estate in terms of the principles of green industry; 2) evaluate the principles of green industry, especially in determining the location; 3) draw up direction for the development of the industrial area of shoves based on the principles of green industry. This research uses scoring method, spatial analysis, and conceptual analysis. this study found that based on the principle of green industrial location, the application of these principles had a total application of 75.6% and on the principle of sustainable site, the area of land was classified as "very appropriate".

Style APA, Harvard, Vancouver, ISO itp.

13

Rijanto, Maria. "ANALISIS STRATEGI BERSAING BISNIS HOME INDUSTRY [ANALYSIS OF HOME INDUSTRY BUSINESS COMPETITIVE STRATEGY]". DeReMa (Development Research of Management): Jurnal Manajemen 16, nr 2 (23.09.2021): 227. http://dx.doi.org/10.19166/derema.v16i2.3989.

Pełny tekst źródła

Streszczenie:

<p><em>The Food Industry is one of industry currently surviving and promising in Indonesia. In 2019 the food and beverage industry in Indonesia increased by 6.77%, and contributed to the national GDP of 7.35% so that this industrial sector can be relied upon. The home industry is one of the business segments that does not require large capital and can absorb a lot of labors. In the city of Bekasi, the market snack industry is one of the industries that is in great demand so that it is growing. This research was conducted in one of the home industries in Harapan Indah, Bekasi. In Harapan Indah, traditional snack industry has tight market competition. Mayona is home industry of traditional snack that has been established since 2002, currently Mayona has the goal of maximizing revenue in order to remain competitive in the current market industry. This research is using qualitative method. the respondents in this study were selected using purposive sampling. Respondent of this research are Mayona owner, Mayona employees, Mayona reseller,owner of retail traditional snack, consumer of enduser Mayona, and consumers of retail traditional snack. This study aims to 1) find out the strengths and weaknesses that Mayona currently has using SWOT analysis, 2) find out what are the external challenges and opportunities of Mayona by using SWOT analysis and Porter's Five Force analysis in the Mayona environment, 3) Propose appropriate strategies to Mayonna is differentiation by creating a competitive advantage.</em></p><p><strong>Abstrak dalam Bahasa Indonesia.</strong> Salah satu industri yang saat ini dapat bertahan dan menjanjikan adalah industri makanan. Di tahun 2019 industri makanan dan minuman di Indonesia mengalami kenaikan 6,77%, dan memberi kontribusi terhadap PDB nasional sebesar 7,35% sehingga sector industry ini dapat diandalkan. <em>Home industry </em>merupakan salah satu segmen usaha yang tidak membutuhkan modal besar dan dapat menyerap banyak tenaga kerja. Di kota Bekasi industri jajanan pasar termasuk industri yang banyak diminati sehingga mengalami pertumbuhan. Penelitian ini dilakukan pada salah satu <em>home industry </em>yang ada di Perumahan Harapan Indah kota Bekasi. Di perumahan Harapan Indah industri jajanan pasar memiliki persaingan yang ketat. Mayona merupakan salah satu <em>home industry </em>jajanan pasar yang sudah berdiri sejak tahun 2002, saat ini Mayona memiliki tujuan yaitu memaksimalkan pendapatan agar dapat tetap bersaing didalam industri jajanan pasar saat ini. Penelitian ini merupakan penelitian kualitatif, responden dalam penelitian ini dipilih dengan menggunakan <em>purposive sampling</em>. Responden dalam penelitian ini terdiri dari pemilik Mayona, karyawan Mayona, <em>resellser </em>Mayona, pemilik tempat titip jual, konsumen <em>enduser </em>Mayona, dan konsumen di tempat titip jual. Penelitian ini bertujuan untuk <sup>1)</sup> mengetahui keunggulan dan kelemahan yang dimiliki Mayona saat ini dengan menggunakan analisis SWOT, <sup>2)</sup> mengetahui yang menjadi tantangan dan kesempatan Mayona dengan menggunakan analisis SWOT dan analisis <em>Porter’s Five Force </em>pada lingkungan eksternal Mayona, <sup>3)</sup> Usulan strategi yang tepat untuk Mayona adalah diferensiasi dengan menciptakan keunggulan kompetitif.</p>

Style APA, Harvard, Vancouver, ISO itp.

14

Safitri, Ayu, i Mukhamad Yazid Afandi. "Trends of Halal Industry Research: A Bibliometric Analysis". Jurnal Ekonomi Syariah Teori dan Terapan 10, nr 6 (30.11.2023): 605–19. http://dx.doi.org/10.20473/vol10iss20236pp605-619.

Pełny tekst źródła

Streszczenie:

ABSTRACT The halal industry provides great opportunities for the provision of goods and services, both domestically and internationally, in the future. The halal industry is one of the topics discussed in several scientific forums. The aim of this research was to discuss the development of research trends in the halal industry over a period of 27 years. This research used bibliometric analysis methods to examine in more depth scientific works and literature that discuss the halal industry in order to study the concept and its development from year to year. Data was collected through searching for articles indexed by Scopus with the acquisition of 960 documents related to the halal industry published between 1997-2023. Data were analyzed using VOSviewer software into three categories, namely network visualization, overlay visualization, and density visualization. The findings show that publications regarding the halal industry have increased significantly. Halal industry research trends based on the author show that Ali, M.H. is the most productive author. The development of halal industry research trends based on keywords shows that halal is the most frequently used keyword, followed by the keywords halal industry, halal tourism, halal food, and Malaysia. Malaysia is the country that has contributed the most to halal industry research. Keywords: Halal, Halal Industry, Bibliometric, Scopus ABSTRAK Industri halal memberikan peluang besar bagi penyediaan barang dan jasa, baik domestik maupun internasional, di masa depan. Industri halal menjadi salah satu topik yang dibahas di beberapa forum ilmiah. Tujuan dari penelitian ini adalah untuk membahas perkembangan tren penelitian pada industri halal dalam kurun waktu 27 tahun. Menggunakan metode analisis bibliometrik untuk mengkaji lebih mendalam karya-karya ilmiah dan literatur tentang industri halal guna mempelajari konsep serta perkembangannya. Data dikumpulkan melalui pencarian artikel yang terindeks oleh Scopus dengan perolehan sebanyak 960 dokumen yang diterbitkan antara tahun 1997-2023. Data dianalisis dengan menggunakan software VOSviewer ke dalam tiga kategori yaitu network visualization, overlay visualization dan density visualization. Hasil penelitian menunjukkan bahwa publikasi mengenai industri halal mengalami peningkatan yang signifikan. Tren penelitian industri halal berdasarkan penulis menunjukkan bahwa Ali, M.H. merupakan penulis yang paling produktif. Perkembangan tren penelitian industri halal berdasarkan kata kunci menunjukkan bahwa halal merupakan kata kunci yang paling banyak digunakan, diikuti kata kunci halal industri, halal tourisme, halal food, dan Malaysia. Malaysia merupakan negara yang paling banyak berkontribusi dalam penelitian industri halal. Keywords: Halal, Industri Halal, Bibliometrik, Scopus

Style APA, Harvard, Vancouver, ISO itp.

15

"Industry 4.0 implementation framework for the producing industry". Journal of Advances in Technology and Engineering Research 4, nr 2 (18.04.2018). http://dx.doi.org/10.20474/jater-4.2.4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Bachtiar, Aziz Ikhsan, Marimin Marimin, Luky Adrianto i Romie Oktovianus Bura. "STRATEGI PENINGKATAN DAYA SAING INDUSTRI PERKAPALAN ( SHIPBUILDING INDUSTRY)". Jurnal Aplikasi Bisnis dan Manajemen, 28.01.2021. http://dx.doi.org/10.17358/jabm.7.1.121.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

"Trained by industry for industry". Production Engineer 64, nr 9 (1985): 5. http://dx.doi.org/10.1049/tpe.1985.0214.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Safavi Jahromi, Gelayol, i Sepehr Ghazinoory. "Clothing industry in transition from Industry 4.0 to Industry 5.0". Journal of The Textile Institute, 11.04.2024, 1–15. http://dx.doi.org/10.1080/00405000.2024.2336438.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

DEMİR, Yeliz, i Fusun ISTANBULLU DİNCER. "The Effects of Industry 4.0 on the Food and Beverage Industry". Journal of Tourismology, 18.08.2020, 133–45. http://dx.doi.org/10.26650/jot.2020.6.1.0006.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Nawiyanto, Nawiyanto, Jose Wendell Capili i Nina Mutiara Calvaryni. "The Colonial Sugar Industry in Indonesia and the Philippines: A Comparative Perspective". Paramita: Historical Studies Journal 33, nr 2 (5.10.2023). http://dx.doi.org/10.15294/paramita.v33i2.46347.

Pełny tekst źródła

Streszczenie:

The sugar industry played a significant role in the colonial economies of Indonesia and the Philippines. Growing the same commodity for the global market, the conditions under which the sugar industry operated in the two places were quite different. Using historical methods and drawing upon secondary sources, this article compares the colonial sugar industry in Indonesia with particular reference to Java and the Philippines between 1890 and 1940. Unlike the case of Indonesia, where the sugar industry operated in densely populated lowland areas, the Philippine sugar industry was established in a sparsely populated region. However, the sugar producers in the two countries took various measures to make their ventures more efficient and competitive. This article will outline broadly the early development of the sugar industry in Java and the Philippines, followed by a discussion on the choice of production technology and the performance of the sugar industry in the interwar period to provide a better understanding of the different development of the sugar industry in Java and the Philippines. The sugar industry in Java was more successful in improving its productivity and efficiency, making the industry more competitive than the Philippines. However, the sugar industry in the two countries had different destinies when the global crises hit hard in the 1930s. Only because of the preferential treatment obtained in the American market did the less efficient sugar industry in the Philippines survive during the Depression. Meanwhile, Java's more efficient sugar industry collapsed due to the unfair protection policy in the world sugar market.Industri gula memainkan peran penting dalam perekonomian kolonial di Indonesia dan Filipina. Menumbuhkan komoditas yang sama untuk pasar global, kondisi industri gula yang beroperasi di kedua tempat tersebut cukup berbeda. Dengan menggunakan metode sejarah dan memanfaatkan sumber-sumber sekunder, artikel ini membandingkan industri gula kolonial di Indonesia dengan referensi khusus di Jawa dan Filipina antara tahun 1890 dan 1940. Berbeda dengan kasus di Indonesia, dimana industri gula beroperasi di daerah dataran rendah yang padat penduduknya, Filipina industri gula didirikan di wilayah yang jarang penduduknya. Namun, produsen gula di kedua negara mengambil berbagai langkah untuk menjadikan usaha mereka lebih efisien dan kompetitif. Artikel ini akan menguraikan secara garis besar perkembangan awal industri gula di Jawa dan Filipina, dilanjutkan dengan diskusi mengenai pilihan teknologi produksi dan kinerja industri gula pada periode antar perang untuk memberikan pemahaman yang lebih baik mengenai perbedaan perkembangan industri gula di Jawa dan Filipina. industri gula di Jawa dan Filipina. Industri gula di Pulau Jawa lebih berhasil meningkatkan produktivitas dan efisiensinya, sehingga industri ini lebih kompetitif dibandingkan Filipina. Namun industri gula di kedua negara mempunyai nasib yang berbeda ketika krisis global melanda pada tahun 1930an. Hanya karena perlakuan istimewa yang diperoleh di pasar Amerika, industri gula yang kurang efisien di Filipina dapat bertahan selama masa Depresi. Sementara itu, industri gula di Jawa yang lebih efisien terpuruk akibat kebijakan proteksi yang tidak adil di pasar gula dunia.

Style APA, Harvard, Vancouver, ISO itp.

21

"Industry". Veterinary Record 184, nr 4 (styczeń 2019): 117. http://dx.doi.org/10.1002/j.2042-7670.2019.tb00222.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

"Industry". Journal of Cellular Plastics 23, nr 6 (listopad 1987): 532–39. http://dx.doi.org/10.1177/0021955x8702300602.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

"Industry". Aircraft Engineering and Aerospace Technology 61, nr 3 (marzec 1989): 33–34. http://dx.doi.org/10.1108/eb036767.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

"Industry". Earthquake Spectra 11, nr 2_suppl (kwiecień 1995): 245–85. http://dx.doi.org/10.1193/1.1585850.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

"Industry". Pigment & Resin Technology 14, nr 1 (styczeń 1985): 22–24. http://dx.doi.org/10.1108/eb042099.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

"Industry". Pigment & Resin Technology 14, nr 1 (styczeń 1985): 25. http://dx.doi.org/10.1108/eb042100.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

"Industry". Pigment & Resin Technology 14, nr 2 (luty 1985): 22–23. http://dx.doi.org/10.1108/eb042109.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

"Industry". Pigment & Resin Technology 14, nr 3 (marzec 1985): 23–24. http://dx.doi.org/10.1108/eb042118.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

"Industry". Pigment & Resin Technology 14, nr 4 (kwiecień 1985): 21–23. http://dx.doi.org/10.1108/eb042128.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

"Industry". Pigment & Resin Technology 14, nr 5 (maj 1985): 23–24. http://dx.doi.org/10.1108/eb042138.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

"Industry". Pigment & Resin Technology 14, nr 6 (czerwiec 1985): 22–23. http://dx.doi.org/10.1108/eb042146.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

"Industry". Pigment & Resin Technology 14, nr 7 (lipiec 1985): 22–25. http://dx.doi.org/10.1108/eb042153.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

"Industry". Pigment & Resin Technology 14, nr 8 (sierpień 1985): 21–23. http://dx.doi.org/10.1108/eb042161.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

"Industry". Pigment & Resin Technology 14, nr 10 (październik 1985): 23–24. http://dx.doi.org/10.1108/eb042168.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

"Industry". Pigment & Resin Technology 14, nr 11 (listopad 1985): 20–23. http://dx.doi.org/10.1108/eb042177.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

"Industry". Pigment & Resin Technology 14, nr 12 (grudzień 1985): 21–24. http://dx.doi.org/10.1108/eb042189.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

"Industry". Pigment & Resin Technology 15, nr 1 (styczeń 1986): 22–24. http://dx.doi.org/10.1108/eb042197.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

"Industry". Pigment & Resin Technology 15, nr 2 (luty 1986): 21–23. http://dx.doi.org/10.1108/eb042209.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

"Industry". Pigment & Resin Technology 15, nr 3 (marzec 1986): 21–24. http://dx.doi.org/10.1108/eb042216.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

"Industry". Pigment & Resin Technology 15, nr 5 (maj 1986): 22–23. http://dx.doi.org/10.1108/eb042232.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

"Industry". Pigment & Resin Technology 15, nr 6 (czerwiec 1986): 23–24. http://dx.doi.org/10.1108/eb042245.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

"Industry". Pigment & Resin Technology 15, nr 7 (lipiec 1986): 24. http://dx.doi.org/10.1108/eb042256.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

"Industry". Pigment & Resin Technology 15, nr 8 (sierpień 1986): 23. http://dx.doi.org/10.1108/eb042268.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

"Industry". Pigment & Resin Technology 15, nr 9 (wrzesień 1986): 23–25. http://dx.doi.org/10.1108/eb042280.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

"Industry". Pigment & Resin Technology 15, nr 10 (październik 1986): 22–24. http://dx.doi.org/10.1108/eb042289.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

"Industry". Pigment & Resin Technology 15, nr 11 (listopad 1986): 24–25. http://dx.doi.org/10.1108/eb042299.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

"Industry". Pigment & Resin Technology 15, nr 12 (grudzień 1986): 20–22. http://dx.doi.org/10.1108/eb042311.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

"Industry". Pigment & Resin Technology 16, nr 1 (styczeń 1987): 20–22. http://dx.doi.org/10.1108/eb042323.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

"Industry". Pigment & Resin Technology 16, nr 3 (marzec 1987): 22–24. http://dx.doi.org/10.1108/eb042342.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

"Industry". Pigment & Resin Technology 16, nr 4 (kwiecień 1987): 19–22. http://dx.doi.org/10.1108/eb042350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!