Rozprawy doktorskie na temat „In situ testing”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „In situ testing”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Williams, Valorie Sharron 1960. "In situ microviscoelastic measurements by polarization interferometry". Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276691.
Pełny tekst źródłaHagen, Anette Brocks. "In-situ Compession Testing of Nanosized Pillars". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-25618.
Pełny tekst źródłaCrouthamel, David Roger 1963. "In-situ flow testing of borehole plugs". Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/291331.
Pełny tekst źródłaJailin, Clément. "Projection-based in-situ 4D mechanical testing". Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLN034/document.
Pełny tekst źródłaThe quantitative analysis of 3D volumes obtained from tomography allows models to be identified and validated. It consists of a sequence of three successive inverse problems: (i) volume reconstruction (ii) kinematic measurement from Digital Volume Correlation (DVC) and (iii) identification. The required very long acquisition times prevent fast phenomena from being captured.A measurement method, called Projection-based DVC (P-DVC), shortens the previous sequence and identifies the kinematics directly from the projections. The number of radiographs needed for tracking the time evolution of the test is thereby reduced from 500 to 1000 down to 2.This thesis extends this projection-based approach to further reduce the required data, letting faster phenomena be captured and pushing the limits of time resolution. Two main axes were developed:- On the one hand, the use of different spatial and temporal regularizations of the 4D fields (space/time) generalizes the P-DVC approach (with a known reference volume) to the exploitation of a single radiograph per loading step. Thus, the test can be carried out with no interruptions, in a few minutes instead of several days.- On the other hand, the measured motion can be used to correct the reconstructed volume itself. This observation leads to the proposition of a novel procedure for the joint determination of the volume and its kinematics (without prior knowledge) opening up new perspectives for material and medical imaging where sometimes motion cannot be interrupted.end{itemize}The development of these two axes opens up new ways of performing tests, faster and driven to the identification of key quantities of interest. These methods are compatible with the recent ``hardware" developments of fast tomography, both at synchrotron beamlines or laboratory and save several orders of magnitude in acquisition time and radiation dose
Greina, Kristine. "IN-SITU FRACTURE MECHANICAL TESTING OF MICROSIZED CANTILEVERS". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-25617.
Pełny tekst źródłaAkbar, Aziz. "Development of low cost in-situ testing devices". Thesis, University of Newcastle Upon Tyne, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364801.
Pełny tekst źródłaZhao, Yueyang. "In situ soil testing for foundation performance prediction". Thesis, University of Cambridge, 2008. https://www.repository.cam.ac.uk/handle/1810/283842.
Pełny tekst źródłaLi, Jingyun Evans John L. "Alternate in-situ environmental testing system by matrix design". Auburn, Ala, 2009. http://hdl.handle.net/10415/1619.
Pełny tekst źródłaOswald, Louisa Jane, i n/a. "Usefulness of Macroinvertebrates for In Situ Testing of Water Quality". University of Canberra. Institute for Applied Ecology, 2008. http://erl.canberra.edu.au./public/adt-AUC20090107.130047.
Pełny tekst źródłaDaniel, Christopher Ryan. "Energy transfer and grain size effects during the Standard Penetration Test (SPT) and Large Penetration Test (LPT)". Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/775.
Pełny tekst źródłaHess, Jeremy. "In-Situ Testing of Uretek's Injectable Barrier as a Mechanism for Groundwater Control". Scholar Commons, 2016. http://scholarcommons.usf.edu/etd/6095.
Pełny tekst źródłaLynch, Alan Gerald. "Trends in back-calculated stiffness of in-situ recycled and stabilised road pavement materials". Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/85857.
Pełny tekst źródłaENGLISH ABSTRACT: Two common methods of road pavement, granular material stabilisation used in road construction throughout South Africa today include Cold in Place Recycling (CIPR) and stabilisation with cement or bitumen and an active filler to create Bitumen Stabilised Materials (BSM). As part of the updating of the South African Pavement Design Method (SAPDM) an experimental section, investigating the structural capacity of cement and lime stabilised and BSM pavement layers, was constructed and will be monitored over a two year period. As part of this study Falling Weight Deflectometer (FWD) measurements were taken on the various experimental stabilised pavement layers constructed. The FWD deflection data, measured at various time intervals over a 360 day period, forms the basis of the study presented here. The objective of this thesis was to identify typical back-calculated layer stiffnesses and their variability over time for the various in-situ recycled and stabilised base layers constructed within the experimental section. Stabiliser type, content and layer thicknesses were varied across experimental sub-sections. Trends in back-calculated stiffness of cement stabilised base layers consistently showed significant reductions in layer stiffness subsequent to construction traffic loading. Subsequent to the initial reduction in stiffness little change in stiffness was noted under normal traffic loads. Observations on the trends in back-calculated stabilised layer stiffness per material type over time indicated that seasonal moisture and temperature fluctuations have an effect on the stiffness of the pavement structure as a whole. BSM materials showed significant variability over time in-line with seasonal variability in the supporting subgrade stiffness in the southbound lane. BSM materials with 1% cement added in the northbound lane show initial stiffness reductions due to direct rainfall application however a significant increase in layer stiffness occurs up to 360 days after construction. BSMs with 2% cement in the northbound lane show significant increases in layer stiffness over the 360 day observation period. No significant difference in stiffness trend was observed between BSM emulsion a BSM foam materials. The BSM emulsion with 0.9% residual bitumen and 1% cement was observed to show rapid reduction in stiffness upon opening to traffic and reverting to stiffness values similar to an unbound material of approximately 350 MPa. Cement and lime stabilised materials showed typical post 28 –day average stiffnesses per sub-section ranging between 600 MPa and 1800 MPa. BSM foam with 1% cement added were observed to have average stiffnesses per sub-section in the range of 400MPa to 2200 MPa and BSM emulsion with 1% cement with stiffnesses between 400 MPa to 1700 MPa over the 360 day period. BSMs with 2% cement added showed stiffness ranges between 900 MPa to 4300 MPa for BSM foam and 900 MPa to 3900 MPa for BSM emulsions over the 360 day period. The spatial variability of back-calculated stiffness per sub-section of a particular stabilisation design was significant and was observed, through the Co-efficient of Variation (COV), to increase over time. The effect of the observed variability when incorporated into a pavement design scenario, requiring a design reliability of 90%, showed 50% of the pavement structure would be overdesigned by a factor of 4. With respect to the current philosophies on the development of stiffness over time of cement and lime stabilised and BSM pavement layers some useful observations were made. Cement stabilised materials correlate well with stiffness development theories predicted by previous studies. Theories relating to the stiffness development of BSMs however did not predict the levels of variability in base layer stiffness observed on the experimental section. The continued observation of the experimental section for another year will give greater insight to the stiffness trends of the stabilised materials discussed above.
Richardson, Sarah. "In-Situ Testing of a Carbon/Epoxy IsoTruss Reinforced Concrete Foundation Pile". Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1280.pdf.
Pełny tekst źródłaDavies, Michael Paul. "Predicting axially and laterally loaded pile behaviour using in-situ testing methods". Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26689.
Pełny tekst źródłaApplied Science, Faculty of
Civil Engineering, Department of
Graduate
Briston, Kevin James. "The functional testing of individual nano-objects using in-situ electron miicroscopy". Thesis, University of Sheffield, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.555646.
Pełny tekst źródłaFarrington, Robert. "Testing mixed phase cloud parametrizations through confronting models with in-situ observations". Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/testing-mixed-phase-cloud-parametrizations-through-confronting-models-with-insitu-observations(e2b7e31b-fa4a-4501-9f30-2ca2452c58fa).html.
Pełny tekst źródłaKidd, David Alan 1956. "In situ testing of Gila Conglomerate with application to probabilistic slope stability". Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/277060.
Pełny tekst źródłaPavic, Aleksandar. "Vibration serviceability of long-span cast in-situ concrete floors". Thesis, University of Sheffield, 1999. http://etheses.whiterose.ac.uk/3486/.
Pełny tekst źródłaGray, Jody D. "In situ determination of strength and stiffness of structural lumber and composite products". Morgantown, W. Va. : [West Virginia University Libraries], 2003. http://etd.wvu.edu/templates/showETD.cfm?recnum=2817.
Pełny tekst źródłaTitle from document title page. Document formatted into pages; contains xi, 154 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 112-122).
Evenden, M. P. "Assessment of the cutting characteristics of coal seams by in situ testing methods". Thesis, University of Nottingham, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.381170.
Pełny tekst źródłaEhret, Steven J. "Instrumentation for anodization and in-situ testing of titanium alloys for capacitor anodes". Case Western Reserve University School of Graduate Studies / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=case1311612394.
Pełny tekst źródłaArnegard, Matthew E. "Toxicant-releasing substrates : a new method for delivering copper to microbial communities in SITU /". Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-12162009-020200/.
Pełny tekst źródłaAshok, Mahima. "Analysis of HER2 testing in breast cancer". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/29711.
Pełny tekst źródłaCommittee Chair: Griffin, Paul; Committee Member: Butera, Robert; Committee Member: Halpern, Michael; Committee Member: Nichols, Richard; Committee Member: Vidakovic, Brani. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Salsbury, Duane. "In-situ testing of radiation effects on VLSI capacitors using the NPS linear accelerator". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1996. http://handle.dtic.mil/100.2/ADA326761.
Pełny tekst źródłaThesis advisor(s): Sherif Michael. "December 1996." Includes bibliographical references (p. 95-96). Also Available online.
Allan, Peter Gerard. "Development of a self-boring pressuremeter for the in situ testing of weak rocks". Thesis, University of Newcastle Upon Tyne, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.238944.
Pełny tekst źródłaRen, Zhe. "Nanomechanics : combining mechanical testing in situ with focused X-ray diffraction on a synchroton beamline". Thesis, Aix-Marseille, 2015. http://www.theses.fr/2015AIXM4387.
Pełny tekst źródłaNanostructures were found to exhibit different mechanical properties compared to their bulk counterpart. For obtaining further insight into the mechanical behaviour on the nanoscale, mechanical tests are combined with observation techniques allowing for monitoring the structural evolution. Within this thesis a special atomic force microscope has been developed which is compatible with different X-ray diffraction techniques at synchrotron sources for in situ mechanical testing on single nano-objects. The great potential of the new experimental approach is demonstrated on two kinds of in situ mechanical tests: (i) in situ nano-indentation on Au crystals with coherent X-ray diffraction. (ii) In situ three point bending tests on Au nanowires with μLaue diffraction. These experiments give access to the elastic as well as the plastic behavior of the nanomaterial and allows for determining the elastic limit and the type of defects induced by the mechanical loading
Ozyurt, Gokhan. "Cataloging And Statistical Evaluation Of Common Mistakes In Geotechnical Investigation Reports For Buildings On Shallow Foundations". Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12615084/index.pdf.
Pełny tekst źródłado not receive the attention they deserve. In this study, site investigation reports, that are required for the license of design projects, are examined and the missing/incorrect site investigations, laboratory tests, geotechnical evaluations and geotechnical suggestions that occur in the reports are catalogued. Also, frequency of each mistake is statistically examined
for geotechnical engineers, recommendations and solutions are presented to help them avoid frequent problems.
Ren, Zhe. "Nanomechanics : combining mechanical testing in situ with focused X-ray diffraction on a synchroton beamline". Electronic Thesis or Diss., Aix-Marseille, 2015. http://www.theses.fr/2015AIXM4387.
Pełny tekst źródłaNanostructures were found to exhibit different mechanical properties compared to their bulk counterpart. For obtaining further insight into the mechanical behaviour on the nanoscale, mechanical tests are combined with observation techniques allowing for monitoring the structural evolution. Within this thesis a special atomic force microscope has been developed which is compatible with different X-ray diffraction techniques at synchrotron sources for in situ mechanical testing on single nano-objects. The great potential of the new experimental approach is demonstrated on two kinds of in situ mechanical tests: (i) in situ nano-indentation on Au crystals with coherent X-ray diffraction. (ii) In situ three point bending tests on Au nanowires with μLaue diffraction. These experiments give access to the elastic as well as the plastic behavior of the nanomaterial and allows for determining the elastic limit and the type of defects induced by the mechanical loading
Foscan, Tiziana. "Mechanical characterization of double-wythe masonry walls with a view to in-situ testing methods". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Znajdź pełny tekst źródłaChapman, Michael James. "Experimental determination of in-situ serviceability of Sitka spruce timber by ultrasonic non-destructive testing". Thesis, University of Ulster, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.370087.
Pełny tekst źródłaBöhm, Jochen. "In situ tensile testing at the limits of X-ray diffraction a new synchrotron-based technique". Stuttgart Max-Planck-Inst. für Metallforschung, 2004. http://deposit.d-nb.de/cgi-bin/dokserv?idn=972182810.
Pełny tekst źródłaLingwanda, Mwajuma. "In-situ Penetration as Alternative to Extensive Boreholes and Lab Testing for Exploration in Sandy Soils". Licentiate thesis, KTH, Jord- och bergmekanik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-161217.
Pełny tekst źródłaFennessy, Michael Jim. "Development and testing of an instrument to measure estuarine floc size and settling velocity in situ". Thesis, University of Plymouth, 1994. http://hdl.handle.net/10026.1/1836.
Pełny tekst źródłaGrippo, Christian P. (Christian Patrick) 1969. "Design and manufacturing of a tensile text machine for in-situ atomic force microscope mechanical testing". Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89386.
Pełny tekst źródłaEvans, John T. IV. "DEVELOPMENT OF A METHOD FOR IN-SITU TESTING OF OXYGEN CONCENTRATIONS IN COMPOST BEDDED PACK BARNS". UKnowledge, 2015. http://uknowledge.uky.edu/bae_etds/30.
Pełny tekst źródłaGlorian, Heinrich, Viktor Schmalz, Pawel Lochyński, Paul Fremdling, Hilmar Börnick, Eckhard Worch i Thomas Dittmar. "Portable Analyzer for On-Site Determination of Dissolved Organic Carbon — Development and Field Testing". Molecular Diversity Preservation International (MDPI), 2018. https://tud.qucosa.de/id/qucosa%3A33327.
Pełny tekst źródłaWatring, Dillon S. "Development of Novel, Microscale Fracture Toughness Testing for Adhesives". FIU Digital Commons, 2017. http://digitalcommons.fiu.edu/etd/3474.
Pełny tekst źródłade, Vaulx Thomas. "Determination of the first damage criterion of a glass/epoxy composite material using an in-situ test system". Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17608.
Pełny tekst źródłaBarrett, Anthony R. "Dynamic Testing of In-Situ Composite Floors and Evaluation of Vibration Serviceability Using the Finite Element Method". Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/28879.
Pełny tekst źródłaPh. D.
Vennapusa, Pavana Kumar Reddy. "Investigation of roller-integrated compaction monitoring and in-situ testing technologies for characterization of pavement foundation layers". [Ames, Iowa : Iowa State University], 2008.
Znajdź pełny tekst źródłaMehmannavaz, Reza. "A laboratory study on the development and testing of a bioaugmentation system for contaminated soils". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0028/NQ50221.pdf.
Pełny tekst źródłaKemerling, Brandon L. "Development of a Weldability Testing Strategy for Laser Powder-Bed Fusion Applications". The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu152380570674288.
Pełny tekst źródłaButler, Joseph Edmund. "In-situ Fiber Strength Distribution in NextelTM 610 Reinforced Aluminum Composites". Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/32433.
Pełny tekst źródłaMaster of Science
Meijer, Gerrit Johannes. "New methods for in situ measurement of mechanical root-reinforcement on slopes". Thesis, University of Dundee, 2016. https://discovery.dundee.ac.uk/en/studentTheses/c8857b54-36cb-4e68-83b1-cf1e78df30d9.
Pełny tekst źródłaSwett, Lauren J. "Seasonal Variations of Pavement Layer Moduli Determined Using In Situ Measurements of Pavement Stress and Strain". Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/SwettLJ2007.pdf.
Pełny tekst źródłaHinterman, Eric Daniel. "System modeling, graphical user interface development, and sensors testing for the Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)". Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119301.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (pages 79-80).
The Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE) represents the first time that NASA is demonstrating In-Situ Resource Utilization (ISRU) on the surface of another planetary body. MOXIE will produce oxygen from atmospheric CO 2 on Mars. It is being developed for NASA's 2020 Mars Rover and will produce greater than 99.6% pure oxygen through solid oxide electrolysis. MOXIE is roughly 0.5% of the scale that would be necessary to produce oxygen for breathing and use as a propellant for a human Mars mission. Tests are being performed on MOXIE in the laboratory at NASA's Jet Propulsion Laboratory (JPL) and the Massachusetts Institute of Technology (MIT). At the same time, a model is being developed to simulate and predict the performance of MOXIE. The ability to predict the performance of MOXIE on Mars is a critical step in preparation for surface operations. Without the ability to estimate inefficient or unsafe operating conditions, MOXIE operations on Mars run a spectrum of risk ranging from loss of efficiency to the loss of the entire mission. Therefore, to predict performance and thus avoid subjecting flight hardware to unsafe conditions, a dynamic model has been developed that simulates MOXIE's operation. Simulink, a package contained within the MATLAB programming language, was chosen as a convenient way to build a dynamic representation of MOXIE. The model was built as a combination of theoretical and empirical values regarding the gas flows, thermal transfers, electrochemistry, and control loops that are representative of the true MOXIE system. The results of this model have been validated against data from JPL's MOXIE testbed laboratory. Continued model validation will occur as JPL acquires new data throughout 2018. This thesis gives an overview of how MOXIE works and how it has been modeled. MOXIE is the first instrument of its kind to leave the Earth, and the modeling of this instrument is similarly unique. As the dynamic model continues to evolve with new data, it becomes a fast and inexpensive way to test MOXIE without subjecting expensive hardware to hazardous conditions. In addition, this thesis covers the development of a Graphical User Interface (GUI) that allows users to easily control the model and view its outputs. Finally, the design and results of construction of a vacuum chamber for testing of MOXIE components are presented. These tests will help to further validate the model and will pave the way for extensibility studies of the MOXIE system.
Supported with the NASA Space Technology Research Fellowship
by Eric Daniel Hinterman.
S.M.
Ali, Arfan. "System modelling and testing of a magnetic susceptibility device and effect of downhole in-situ temperatures on magnetic susceptibility". Thesis, Heriot-Watt University, 2009. http://hdl.handle.net/10399/2232.
Pełny tekst źródłaRenner, Axel, Uwe Marschner i Wolf-Joachim Fischer. "A new imaging approach for in situ and ex situ inspections of conductive fiber–reinforced composites by magnetic induction tomography". Sage, 2014. https://tud.qucosa.de/id/qucosa%3A35619.
Pełny tekst źródłaBrewer, Michael D., i Michael D. Brewer. "Column Leaching Experiments and Mass Balance Modeling Simulating In-Situ Leaching within the Oxide Zone of the Florence Porphyry Copper Deposit, Pinal County, Arizona". Thesis, The University of Arizona, 1998. http://hdl.handle.net/10150/191367.
Pełny tekst źródłaBrashear, Kyle Thomas. "The Assessment of Sonic Waves and Tracer Gases as Non-Destructive Testing (NDT) Methods for In-Situ Underground Mine Seals". Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/50519.
Pełny tekst źródłaMaster of Science