Gotowa bibliografia na temat „Imprimed polymers”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Imprimed polymers”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Imprimed polymers"
Becskereki, Gergely, George Horvai i Blanka Tóth. "The Selectivity of Molecularly Imprinted Polymers". Polymers 13, nr 11 (28.05.2021): 1781. http://dx.doi.org/10.3390/polym13111781.
Pełny tekst źródłaChu, Hui Juan, Hong Liang Wei, Jing Zhu i Chun Ping Nong. "Synthesis and Performance of Molecular Imprinted Polymers as Drug Release Controller". Applied Mechanics and Materials 130-134 (październik 2011): 446–49. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.446.
Pełny tekst źródłaAzodi-Deilamia, Saman, Majid Abdoussa i S. Rezvaneh Seyedib. "Synthesis and characterization of molecularly imprinted polymer for controlled release of tramadol". Open Chemistry 8, nr 3 (1.06.2010): 687–95. http://dx.doi.org/10.2478/s11532-010-0035-x.
Pełny tekst źródłaJamoussi, Bassem, Radhouane Chakroun, Bandar A. Al-Mur, Riyadh F. Halawani, Fahed A. Aloufi, Anis Chaabani i Naif S. Aljohani. "Design of a New Phthalocyanine-Based Ion-Imprinted Polymer for Selective Lithium Recovery from Desalination Plant Reverse Osmosis Waste". Polymers 15, nr 18 (21.09.2023): 3847. http://dx.doi.org/10.3390/polym15183847.
Pełny tekst źródłaQiu, Hua Min, Chuan Nan Luo, Lu Lu Fan, Zhen Lv i Fu Guang Lu. "Molecularly Imprinted Polymer Prepared by Precipitation Polymerization for Quercetin". Advanced Materials Research 306-307 (sierpień 2011): 646–48. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.646.
Pełny tekst źródłaBing, Nai Ci, Xiang Rong Zhu, Zhen Tian, Hong Yong Xie i Li Jun Wang. "Controllable Imprinted Polymer Layer Coated Silica-Gel for S-1-(1-Naphthyl) Ethylamine Recognition by ATRP". Advanced Materials Research 508 (kwiecień 2012): 237–40. http://dx.doi.org/10.4028/www.scientific.net/amr.508.237.
Pełny tekst źródłaAugustine, Anju, i Beena Mathew. "Synthesis of Carbon Nanotube Incorporated Molecular Imprinted Polymer with Binding Affinity towards Testosterone". ISRN Polymer Science 2014 (19.02.2014): 1–7. http://dx.doi.org/10.1155/2014/790583.
Pełny tekst źródłaThach, Ut Dong, Hong Hanh Nguyen Thi, Tuan Dung Pham, Hong Dao Mai i Tran-Thi Nhu-Trang. "Synergetic Effect of Dual Functional Monomers in Molecularly Imprinted Polymer Preparation for Selective Solid Phase Extraction of Ciprofloxacin". Polymers 13, nr 16 (19.08.2021): 2788. http://dx.doi.org/10.3390/polym13162788.
Pełny tekst źródłaJiang, Xu Hong, i Zhan Mei Liu. "Uiformly-Sized, Molecularly Imprinted Polymers for Naproxen by Precipitation Polymerization". Advanced Materials Research 399-401 (listopad 2011): 713–17. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.713.
Pełny tekst źródłaBhawani, Showkat Ahmad, Nur'Izzah Binti Juarah, Salma Bakhtiar, Rachel Marcella Roland, Mohamad Nasir Mohamad Ibrahim, Khalid Mohammed Alotaibi i Abdul Moheman. "Synthesis of Molecularly Imprinted Polymer Nanoparticles for Removal of Sudan III Dye". Asian Journal of Chemistry 34, nr 12 (2022): 3269–74. http://dx.doi.org/10.14233/ajchem.2022.24052.
Pełny tekst źródłaRozprawy doktorskie na temat "Imprimed polymers"
Sala, Alexandre. "Synthèse et caractérisation de polymères à empreintes ionique du cuivre pour la conception d'électrodes modifiées". Electronic Thesis or Diss., Toulon, 2022. http://www.theses.fr/2022TOUL0010.
Pełny tekst źródłaThe use of copper as a biocide in anti-fouling coatings on ships has led to its accumulation in harbour waters. The aim of this work is to develop electrochemical sensors for its detection in marine samples. For this purpose, copper(II)-imprinted polymers were prepared and used for the modification of electrodes.Firstly, imprinted polymer particles were synthesised using a cross-linking agent (ethylene glycol dimethacrylate or N,N'-methylene-bis-acrylamide) and a functional monomer, methacrylamido-L-histidine (MAH), which can form a complex with copper(II). The physico-chemical characterization of the polymer particles confirmed the integration of MAH and allowed to evaluate the morphological properties of the polymers.The copper(II) binding properties were then evaluated and the particles with the best performance were used to make carbon paste electrodes. These electrodes, with a detection limit of 5.9 x 10-2 μM (or 3.75 μg/L), allowed the determination of copper(II) in marine samples.Finally, new approaches for surface modification were explored for in situ polymer film formation. Thus, iniferters were grafted onto gold electrodes by the formation of self-assembled monolayers but also by electropolymerisation of a polymer with pendant iniferter functions. The latter route allowed the photopolymerisation of a copper(II)-imprinted polymer film on a carbon electrode
Mandadi, Deepika. "A Characterization of Caffeine Imprinted Polypyrrole Electrode". TopSCHOLAR®, 2009. http://digitalcommons.wku.edu/theses/130.
Pełny tekst źródłaO'Donnell, Elizabeth Anne. "Water-compatible molecularly imprinted polymers". Thesis, University of Strathclyde, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.438467.
Pełny tekst źródłaRobak, Andrew Joseph. "Development of coenzyme-imprinted molecularly imprinted polymers as catalysts /". view abstract or download file of text, 2007. http://proquest.umi.com/pqdweb?did=1276397881&sid=1&Fmt=2&clientId=11238&RQT=309&VName=PQD.
Pełny tekst źródłaTypescript. Includes vita and abstract. Includes bibliographical references (leaves 94-100). Also available for download via the World Wide Web; free to University of Oregon users.
Tsai, Mei-Hsuan. "Boron containing molecular imprinted polymer (MIP) templates from symmetric and asymmetric diboration of olefins and other boron containing functional polymers". Thesis, University of Cambridge, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.608235.
Pełny tekst źródłaBates, Ferdia. "Design and development of molecularly imprinted polymers and imprinted sensors". Doctoral thesis, Universitat Autònoma de Barcelona, 2016. http://hdl.handle.net/10803/399170.
Pełny tekst źródłaThis thesis was predominantly undertaken to study and investigate molecular imprinted polymers (MIPs) with a view to their use as high longevity sensing elements in sensor arrays. The research line of the thesis was intended to lead to the integration of these imprinted arrays into an Electronic Tongue (ET) sensing system which is the area of expertise of the research group in which this project was primarily executed. Having initially executed a review of the literature, focusing initially on the application of the MIPs to an electrochemical device, an imprinted voltammetric sensor and a complimentary sensing procedure was developed using a combination of protocols extracted from the literature. This sensor, described in Article 1, had good selectivity toward the primary analyte, theophylline, and specificity against structural analogues. Though the design of the sensor allowed for significantly improved regeneratibility of the sensor relative to similar systems in the literature, the insulating nature of the polymers used in the MIP reduced the electron transfer rate at the sensor surface and thus resulted in a reduction in sensitivity. Following this initial experimental study, a secondment was undertaken in the University of Leicester under the supervision of Professor Sergey Piletsky. During this period, an intensive study of the design process of molecular imprinting, aided by an in-house computational molecular modelling platform, was conducted focusing on the design of an imprinted receptor for the low solubility 'model template', melamine. This MIP was successfully synthesised, characterised and used in the detection of melamine in milk samples, as detailed in Article 2. Further development of computational modelling techniques for the evaluation of MIP modelling techniques was also achieved with a view to create a virtual evaluation technique for the design of imprinted receptor sites optimised for the requirements of their application to an ET sensor array using the skills acquired during the Leicester secondment as detailed in Article 3. As detailed in the final chapter of this thesis, the insight into the imprinting process which was acquired during the research has been used to design a sensor array system which meets the specifications of ET experimental runs. This takes the form of the introduction of the research topic computationally selected polyelectrolytes, immobilised onto a voltammetric electrode surface via highly robust conducting graphite ink. Additional recommendations are also made to further enhance the on-going MIP projects within the laboratory, such as the separation of the MIP and the electrode to increase MIP regeneratibility. Some final suggestions for some other inter-institutional collaboration are also presented which aim to creating portable ET system for in-field sample collection and analysis.
Yvenou, Etienne. "Développement de modules thermoélectriques imprimés et flexibles pour des applications à température ambiante". Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI071/document.
Pełny tekst źródłaThermoelectricity can convert directly and reversibly a heat flux into an electric current with p and n-type semiconductors. Conjugated polymers, such as poly(3,4-ethylenedioxithiophene) (PEDOT), offers an alternative to the best room temperature thermoelectric materials based on bismuth telluride alloys which used scarce, hazardous and hard to process raw materials.This PhD work aims to enhance the electrical conductivity of an in-situ polymerised PEDOT and make it easy to process with large scale printing techniques like spray-coating.The first part focus on the optimisation of this synthetized PEDOT through spin-coating. The doping of this PEDOT is stabilised with the counter-ion trifluoromethanesulfonate (OTf-). One way of enhancement is to add co-solvents like pyridine and NMP in order to slow down the polymerisation rate. Consequently, PEDOT:OTf get a better structure and reach an outstanding electrical conductivity of 3,600 S.cm-1 without decreased the Seebeck coefficient which remains around 20 µv.K-1.The second part studies pro and cons of the ultrasonic spray as a coating technic to this enhanced PEDOT:OTf. This technic allows to keep an ink formulation closed of the spin-coating one and can print thick films (~ 1 µm) with an electrical conductivity above 1650 S.cm-1. XRD and transport measurements are achieved in order to understand and compare both spray and spin-coating techniques. And therefore, to enlighten improvement on formulation and process.At last, several examples of spray-coated thermoelectric generators are shown and tested. Thus by printing more than 300 thermocouples connected in series and rolled into a cylinder, such devices could produce 1 µW with a gradient of temperature of 35 °C on a surface less than a 5 cm2 (size of a coin).This thesis work wishes to provide insight on the process-electrical relationship in conducting polymers
Bonini, Francesca. "Molecularly imprinted polymers for protome analysis". Thesis, Cranfield University, 2008. http://dspace.lib.cranfield.ac.uk/handle/1826/2716.
Pełny tekst źródłaMistry, Reena. "Niacinamide analysis using molecularly imprinted polymers". Thesis, University of British Columbia, 2002. http://hdl.handle.net/2429/43182.
Pełny tekst źródłaWang, Jinfang. "Xanthine-imprinted polymers for decaffeination applications". Thesis, University of Strathclyde, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431777.
Pełny tekst źródłaKsiążki na temat "Imprimed polymers"
Martín-Esteban, Antonio, red. Molecularly Imprinted Polymers. New York, NY: Springer US, 2021. http://dx.doi.org/10.1007/978-1-0716-1629-1.
Pełny tekst źródłaMattiasson, Bo, i Lei Ye, red. Molecularly Imprinted Polymers in Biotechnology. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20729-2.
Pełny tekst źródłaBörje, Sellergren, red. Molecularly imprinted polymers: Man-made mimics of antibodies and their applications in analytical chemistry. Amsterdam: Elsevier, 2001.
Znajdź pełny tekst źródłaBartsch, Richard A., i Mizuo Maeda, red. Molecular and Ionic Recognition with Imprinted Polymers. Washington, DC: American Chemical Society, 1998. http://dx.doi.org/10.1021/bk-1998-0703.
Pełny tekst źródłaKutner, Wlodzimierz, i Piyush Sindhu Sharma, red. Molecularly Imprinted Polymers for Analytical Chemistry Applications. Cambridge: Royal Society of Chemistry, 2018. http://dx.doi.org/10.1039/9781788010474.
Pełny tekst źródłaA, Bartsch Richard, Maeda Mizuo, American Chemical Society. Division of Industrial and Engineering Chemistry. i American Chemical Society Meeting, red. Molecular and ionic recognition with imprinted polymers. Washington, DC: American Chemical Society, 1998.
Znajdź pełny tekst źródła1967-, Yan Mingdi, i Ramström Olof, red. Molecularly imprinted materials: Science and technology. New York: Marcel Dekker, 2005.
Znajdź pełny tekst źródłaLiu, Zhaosheng, Yanping Huang i Yi Yang, red. Molecularly Imprinted Polymers as Advanced Drug Delivery Systems. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0227-6.
Pełny tekst źródła1947-, Komiyama Makoto, red. Molecular imprinting: From fundamentals to applications. Weinheim: Wiley-VCH, 2003.
Znajdź pełny tekst źródłaDavis, Fred J., red. Polymer Chemistry. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780198503095.001.0001.
Pełny tekst źródłaCzęści książek na temat "Imprimed polymers"
Hall, Andrew J., Marco Emgenbroich i Börje Sellergren. "Imprinted Polymers". W Topics in Current Chemistry, 317–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/b104333.
Pełny tekst źródłaWhitcombe, Michael J., i Dhana Lakshmi. "Imprinted Polymers". W Electropolymerization, 133–51. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527630592.ch7.
Pełny tekst źródłaUlubayram, Kezban. "Molecularly Imprinted Polymers". W Advances in Experimental Medicine and Biology, 123–38. Boston, MA: Springer US, 2004. http://dx.doi.org/10.1007/978-0-306-48584-8_10.
Pełny tekst źródłaPiletsky, Sergey A., Iva Chianella i Michael J. Whitcombe. "Molecularly Imprinted Polymers". W Encyclopedia of Biophysics, 1596–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-16712-6_719.
Pełny tekst źródłaTakeuchi, Toshifumi, i Hirobumi Sunayama. "Molecularly Imprinted Polymers". W Encyclopedia of Polymeric Nanomaterials, 1–5. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-36199-9_126-1.
Pełny tekst źródłaHaupt, Karsten, Ana V. Linares, Marc Bompart i Bernadette Tse Sum Bui. "Molecularly Imprinted Polymers". W Topics in Current Chemistry, 1–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/128_2011_307.
Pełny tekst źródłaTakeuchi, Toshifumi, i Hirobumi Sunayama. "Molecularly Imprinted Polymers". W Encyclopedia of Polymeric Nanomaterials, 1291–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-29648-2_126.
Pełny tekst źródłaRosa, Mariana Azevedo, Tássia Venga Mendes i Eduardo Costa Figueiredo. "Restricted Access Molecularly Imprinted Polymers". W Molecularly Imprinted Polymers, 53–70. New York, NY: Springer US, 2021. http://dx.doi.org/10.1007/978-1-0716-1629-1_5.
Pełny tekst źródłaTuriel Trujillo, Esther, i Myriam Díaz-Álvarez. "Preparation of Monolithic Fibers in Fused Silica Capillary Molds for Molecularly Imprinted Solid-Phase". W Molecularly Imprinted Polymers, 153–62. New York, NY: Springer US, 2021. http://dx.doi.org/10.1007/978-1-0716-1629-1_13.
Pełny tekst źródłaBossi, Alessandra Maria, i Laura Pasquardini. "The Search for Peptide Epitopes for Through". W Molecularly Imprinted Polymers, 269–83. New York, NY: Springer US, 2021. http://dx.doi.org/10.1007/978-1-0716-1629-1_22.
Pełny tekst źródłaStreszczenia konferencji na temat "Imprimed polymers"
Vitale, U., A. Rechichi, M. D’Alonzo, C. Cristallini, N. Barbani, G. Ciardelli i P. Giusti. "Selective Peptide Recognition With Molecularly Imprinted Polymers in Designing New Biomedical Devices". W ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95587.
Pełny tekst źródłaZhenhe Chen, Bin Xue, Wentao Zhao, Linxia Zhang, Liquan Sun i Aiqin Luo. "High porosity lysozyme imprinted polymers". W 2011 International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE). IEEE, 2011. http://dx.doi.org/10.1109/rsete.2011.5964091.
Pełny tekst źródłaCiardelli, G., F. M. Montevecchi, P. Giusti, D. Silvestri, I. Morelli, C. Cristallini i G. Vozzi. "Molecular Imprinted Nanostructures in Biomedical Applications". W ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95669.
Pełny tekst źródłaBenito-Peña, Elena, Sergio Carrasco, Fernando Navarro-Villoslada, David R. Walt i María C. Moreno-Bondi. "Optically-based Molecularly Imprinted Polymers Sensors". W Optical Sensors. Washington, D.C.: OSA, 2017. http://dx.doi.org/10.1364/sensors.2017.setu2e.4.
Pełny tekst źródłaLulinski, Piotr, i Dorota Maciejewska. "Preliminary Evaluation of Molsidomine Imprinted Polymers". W The 12th International Electronic Conference on Synthetic Organic Chemistry. Basel, Switzerland: MDPI, 2008. http://dx.doi.org/10.3390/ecsoc-12-01269.
Pełny tekst źródłaXie, Baiyi, i Aiqin Luo. "Research on the Lysozyme imprinted polymers". W 2015 2nd International Conference on Machinery, Materials Engineering, Chemical Engineering and Biotechnology. Paris, France: Atlantis Press, 2016. http://dx.doi.org/10.2991/mmeceb-15.2016.30.
Pełny tekst źródłaTancharoen, Chompoonuch, Wannisa Sukjee, Chak Sangma i Thipvaree Wangchareansak. "Molecularly Imprinted Polymer for explosive detection". W 2015 Asian Conference on Defence Technology (ACDT). IEEE, 2015. http://dx.doi.org/10.1109/acdt.2015.7111605.
Pełny tekst źródłaMurray, George M., Bradley R. Arnold, Craig A. Kelly i O. Manuel Uy. "Imprinted polymer sensors for contamination detection". W Environmental and Industrial Sensing, redaktorzy Yud-Ren Chen i Shu-I. Tu. SPIE, 2001. http://dx.doi.org/10.1117/12.418722.
Pełny tekst źródłaZHANG, ZHUJUN. "MOLECULAR IMPRINTED POLYMER-BASED CHEMILUMINESCENCE SENSORS". W Proceedings of the 15th International Symposium. WORLD SCIENTIFIC, 2008. http://dx.doi.org/10.1142/9789812839589_0037.
Pełny tekst źródłaHolthoff, Ellen L., Dimitra N. Stratis-Cullum i Mikella E. Hankus. "Xerogel-based molecularly imprinted polymers for explosives detection". W SPIE Defense, Security, and Sensing, redaktorzy Augustus W. Fountain III i Patrick J. Gardner. SPIE, 2010. http://dx.doi.org/10.1117/12.850129.
Pełny tekst źródłaRaporty organizacyjne na temat "Imprimed polymers"
Holthoff, Ellen L., Lily Li, Tobias Hiller i Kimberly L. Turner. A Molecularly Imprinted Polymer (MIP)-Coated Microbeam MEMS Sensor for Chemical Detection. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2015. http://dx.doi.org/10.21236/ada622335.
Pełny tekst źródłaHarvey, Scott D. Ultraselective Sorbents. Task 2: Molecularly Imprinted Polymers (MIPs)/Stabilized Antibody Fragments (STABs). Final Report FY 2004. Office of Scientific and Technical Information (OSTI), wrzesień 2004. http://dx.doi.org/10.2172/15016482.
Pełny tekst źródłaHolthoff, Ellen, i Dimitra Stratis-Cullum. A Nanosensor for Explosives Detection Based on Molecularly Imprinted Polymers (MIPs) and Surfaced-enhanced Raman Scattering (SERS). Fort Belvoir, VA: Defense Technical Information Center, marzec 2010. http://dx.doi.org/10.21236/ada516676.
Pełny tekst źródłaHarvey, Scott D. Ultraselective Sorbents. Task 2: Molecularly Imprinted Polymers (MIPs)/Stabilized Antibody Fragments (STABs). Final Report -- Fiscal Year (FY) 2005. Office of Scientific and Technical Information (OSTI), wrzesień 2005. http://dx.doi.org/10.2172/860003.
Pełny tekst źródłaBendikov, Michael, i Thomas C. Harmon. Development of Agricultural Sensors Based on Conductive Polymers. United States Department of Agriculture, sierpień 2006. http://dx.doi.org/10.32747/2006.7591738.bard.
Pełny tekst źródłaGlasscott, Matthew, Johanna Jernberg, Erik Alberts i Lee Moores. Toward the electrochemical detection of 2,4-dinitroanisole (DNAN) and pentaerythritol tetranitrate (PETN). Engineer Research and Development Center (U.S.), marzec 2022. http://dx.doi.org/10.21079/11681/43826.
Pełny tekst źródła