Gotowa bibliografia na temat „Hydrure de titane”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Hydrure de titane”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Hydrure de titane"
Liu, Dage, Hongxi Zhang, Zhong Wang i Liancheng Zhao. "Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Powders and Thin Films by a Sol-gel Route". Journal of Materials Research 15, nr 6 (czerwiec 2000): 1336–41. http://dx.doi.org/10.1557/jmr.2000.0194.
Pełny tekst źródłaGranhed, Erik Jedvik, Anders Lindman, Carin Eklöf-Österberg, Maths Karlsson, Stewart F. Parker i Göran Wahnström. "Band vs. polaron: vibrational motion and chemical expansion of hydride ions as signatures for the electronic character in oxyhydride barium titanate". Journal of Materials Chemistry A 7, nr 27 (2019): 16211–21. http://dx.doi.org/10.1039/c9ta00086k.
Pełny tekst źródłaOsegovic, John P., i Michael D. Max. "Compound clathrate hydrate on Titan's surface". Journal of Geophysical Research: Planets 110, E8 (sierpień 2005): n/a. http://dx.doi.org/10.1029/2005je002435.
Pełny tekst źródłaŠtengl, Václav, Jiří Henych, Martin Šťastný i Martin Kormunda. "Fast and Straightforward Synthesis of Luminescent Titanium(IV) Dioxide Quantum Dots". Journal of Nanomaterials 2017 (2017): 1–9. http://dx.doi.org/10.1155/2017/3089091.
Pełny tekst źródłaConforto, Egle, Frank A. Müller, Lenka Müller i Daniel Caillard. "Chemically Pre-Treated and Biomimetically Coated Titanium for Medical Applications: The True Structure Revealed by Transmission Electron Microscopy". Key Engineering Materials 361-363 (listopad 2007): 637–40. http://dx.doi.org/10.4028/www.scientific.net/kem.361-363.637.
Pełny tekst źródłaConforto, Egle, Daniel Caillard, Lenka Müller i Frank Müller. "The Structure and the Evolution of Titanate Nanobelts, Used as Seeds for the Nucleation of Hydroxyapatite at the Surface of Titanium Implants". Solid State Phenomena 172-174 (czerwiec 2011): 905–10. http://dx.doi.org/10.4028/www.scientific.net/ssp.172-174.905.
Pełny tekst źródłaDavies, Ashley Gerard, Christophe Sotin, Mathieu Choukroun, Dennis L. Matson i Torrence V. Johnson. "Cryolava flow destabilization of crustal methane clathrate hydrate on Titan". Icarus 274 (sierpień 2016): 23–32. http://dx.doi.org/10.1016/j.icarus.2016.02.046.
Pełny tekst źródłaRévész, Ádám, Dániel G. Fodor, György Krállics, Tony Spassov i Marcell Gajdics. "Structural and hydrogen storage characterization of nanocrystalline magnesium synthesized by ECAP and catalyzed by different nanotube additives". REVIEWS ON ADVANCED MATERIALS SCIENCE 60, nr 1 (1.01.2021): 884–93. http://dx.doi.org/10.1515/rams-2021-0056.
Pełny tekst źródłaMädler, L., W. J. Stark i S. E. Pratsinis. "Simultaneous deposition of Au nanoparticles during flame synthesis of TiO2 and SiO2". Journal of Materials Research 18, nr 1 (styczeń 2003): 115–20. http://dx.doi.org/10.1557/jmr.2003.0017.
Pełny tekst źródłaSasaki, T., Y. Komatsu i Y. Fujiki. "Formation and characterization of layered lithium titanate hydrate". Materials Research Bulletin 22, nr 10 (październik 1987): 1321–28. http://dx.doi.org/10.1016/0025-5408(87)90295-9.
Pełny tekst źródłaRozprawy doktorskie na temat "Hydrure de titane"
Wang, Qian. "Crystallographic analysis of hydride phase transformation and its effect on mechanical property of commercial pure titanium". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0034.
Pełny tekst źródłaNucleation and formation of hydride precipitates are important factors on limiting the lifetime of Ti alloys. In this work, the hydride phase transformation in commercial pure titanium is thoroughly investigated by experimental and theoretically crystallographic method. The two dominant orientation relationships (ORs) of hydride transformation by the method of electrolytic hydrogen charging are {0001} //{001} <12̅10>//<110> with interface plane of {101̅0}//{11̅0} (OR1) and {0001}//{11̅1} <12̅10>//<110> with interface plane of {101̅3}//{11̅0} (OR2). The grain orientations of {101̅0} or {101̅3} interface planes parallel to the diffusion surface are most favorable for OR1 and OR2 hydride transition, respectively. The hydride variants with interface plane parallel to the diffusion surface is preferentially selected because of the highest capacity for strain accommodation. The c-axis or a-axis parallel to the diffusion direction are unfavorable orientations, due to the complicated interactions between different hydride variants. The multi-dimensional microstructures of hydride layer were characterized to investigate the accommodation mechanisms for hydride transformation. Plastic accommodation behaviors are necessary inside hydride layer. Both {101̅2} extension and {112̅2} contraction twins are induced at the interface of OR2 hydride platelets. The selected twin variant has the highest accommodation capacity for local distortion of hydride nucleation. The {101̅2} twins are transformed into {101̅1} twins in order to the further growth of hydride platelet. Hydride microstructure on the cross section of hydride layer were observed for the first time, the interactions of different hydride variants relax the anisotropic misfit strain inside hydride layer. The intergranular hydride pair is another accommodation behavior during hydrogenation, which prefer to be formed at the grain boundary with both low angle (< 30o) and high angle (75o< θc < 85o) boundaries. The mechanical property of titanium surface changed by hydrogen charging was investigated by nanoindentation tests and tensile deformation tests. After hydrogenation, the nanohardness increases while elastic modulus decreases due to the formation of hydride precipitation. The orientation dependent hardness of δ-hydride formed after 168 h charging is less sensitive than that of α-Ti. The average HIT value of δ-hydride is 3.8 ± 0.3 GPa, which is higher than titanium matrix (2.8 ± 0.3 GPa) showing the hard nature of hydride phase. During tensile deformation, hydride layer shows a poor deformability, but the interactions between dislocations and twins occur for OR2 hydride platelets: the transmissions of prismatic slips into hydride precipitations and the hindering of hydrides on the growth and thickening of {101̅2} tension twins
Boulila, Sabrine. "Propriétés d’absorption de l’hydrogène sur un titane commercial pur Ti50A ayant subi du laminage à froid". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0066.
Pełny tekst źródłaThe constant use of hydrocarbons, carbon dioxide emissions and global warming are the subject of a global energy debate. Establishing a hydrogen economy is considered as an effective alternative solution. Various technological problems have to be solved to achieve such a global energy system such as hydrogen production, delivery and storage. Various methods of storing hydrogen are available. Among these, storage in the form of metal hydrides represents a promising and practical means. In this context, mechanical deformation techniques applied to hydrogen storage materials have seen increased use these recent years. These techniques enable the improvement of the hydrogen storage performance of various types of metal hydrides. The present work focuses on the effect of mechanical deformation induced by the cold rolling technique on the hydrogen absorption properties of the commercial pure titanium Ti50A. To do this, two main processing parameters were varied and studied during cold rolling, namely the reduction rate and the rolling speed. First, an analysis and an understanding of the deformation microstructures induced by the cold rolling technique on pure titanium before hydrogenation was carried out for the different mechanical processing conditions. Then, the study of the effect of cold rolling on the first hydrogen absorption of titanium was carried out. The hydrogenated samples were also examined and the titanium hydride formed after complete hydrogenation was characterized. The obtained results showed a significant improvement in the kinetics of the first hydrogen absorption for the cold-rolled samples compared to the unrolled pure titanium sample. The parametric study performed on titanium Ti50A showed that the cold rolling processing parameters greatly affect the kinetics of the first hydrogenation while maintaining the maximum hydrogen absorption capacity. The increase in the reduction rate during cold rolling allows the improvement of the hydrogenation kinetics, associated with an activation of the twinning deformation for low reduction rates and a decrease in the size of the titanium grains after rolling. On the other hand, it has been shown that a low rolling speed ensures better kinetics of hydrogen absorption, while exhibiting microstructures characterized by a large fraction of low angle boundaries. Finally, the mechanism of hydrogen absorption by titanium was investigated through the determination of the rate limiting-step of the absorption reaction. It was revealed that all rolled samples under the different conditions follow the absorption mechanism governed by the contracting volume model. In addition, a sample of rolled titanium was selected for detailed study of the phase transformation of titanium to titanium hydride following complete uptake of hydrogen by Ti50A. This study was performed by analyzing and examining partially hydrogenated samples
SALA, BEATRICE. "Contribution a l'etude de la corrosion du titane, de ses alliages et de certains aciers inoxydables en milieu aqueux, a haute temperature et sous pression". Orléans, 1987. http://www.theses.fr/1987ORLE2048.
Pełny tekst źródłaHuez, Julitte. "Influence de l'hydrogène sur les mécanismes d'endommagement du titane alpha et d'un alliage de titane biphasé alpha/bêta". Compiègne, 1996. http://www.theses.fr/1996COMPD950.
Pełny tekst źródłaBini, Fabien. "Applications de la chimie organométallique de surface à l'époxydation des oléfines : synthèse de catalyseurs à base de titane et investigations mécanistiques". Lyon 1, 2004. http://www.theses.fr/2004LYO10222.
Pełny tekst źródłaMonnin, Carole. "Etude de l'optimisation de l'élaboration et des performances de cibles à hydrures de titane (deuteriure et tritiure) destinées à la production de neutrons". Dijon, 2000. http://www.theses.fr/2000DIJOS024.
Pełny tekst źródłaHurysz, Kevin Michael. "The processing of titanium hydride powders into uniform hollow spheres". Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/19502.
Pełny tekst źródłaSakaguchi, Tatsunori. "Synthesis and Characterization of Titanium Perovskite Oxyhydrides Prepared by Topochemical Hydride Reduction". 京都大学 (Kyoto University), 2016. http://hdl.handle.net/2433/215561.
Pełny tekst źródłaLaval, Stéphane. "Nouveaux systèmes réducteurs utilisant des hydrosiloxanes comme substituts des hydrures d'aluminium et de bore : application à la réduction des fonctions amides et nitriles". Phd thesis, Université Claude Bernard - Lyon I, 2011. http://tel.archives-ouvertes.fr/tel-00847353.
Pełny tekst źródłaLaval, Stéphane. "Nouveaux systèmes réducteurs utilisant des hydrosiloxanes comme substituts des hydrures d’aluminium et de bore : application à la réduction des fonctions amides et nitriles". Thesis, Lyon 1, 2011. http://www.theses.fr/2011LYO10193/document.
Pełny tekst źródłaIn recent years, industrial and academic researches have experienced unprecedented changes related to the concept of sustainable development. Health and environment new requirements have prompted chemists to develop chemical products and processes that reduce or eliminate hazardous substances. The research work described in this thesis is focused on the development of new reducing systems using hydrosiloxanes as substitutes for aluminum and boron hydrides. In order to achieve this goal, reducing systems combining 1,1,3,3-tetramethyldisiloxane (TMDS) or polymethylhydrosiloxane (PMHS) with titanium or vanadium complexes have been developed for the reduction of amides and nitriles. The nature of both the association “hydrosiloxane – metal” as well as the studied substrate played an important role on the performance and the selectivity of the reaction. On the one hand, selective reductions of amides (tertiary and secondary) and nitriles to aldehydes were carried out respectively in the presence of titanium(IV) tetraisopropoxide and vanadium(V) triisopropoxide oxide. On the other hand, reductions of amides (primary) and nitriles afforded the corresponding primary amines in the presence of titanium(IV) tetraisopropoxide. Finally, these systems have been applied for the synthesis of saturated N-heterocycles. Reduction of dinitrile compounds led, in one step, to piperidine, pyrrolidine and azetidine derivatives through an intramolecular reductive alkylation reaction
Części książek na temat "Hydrure de titane"
Roy, Syamantak, Jaehun Cho, Nathan J. Hamilton, Amarchand Sathyapalan, Michael L. Free i Zhigang Zak Fang. "Production of Titanium Hydride Powder by Leaching of Aluminum and Silicon Impurities from Reduced Upgraded Titania Slag for Low Cost Titanium Production". W TMS 2016 145th Annual Meeting & Exhibition, 713–19. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48254-5_85.
Pełny tekst źródłaRoy, Syamantak, Jaehun Cho, Nathan J. Hamilton, Amarchand Sathyapalan, Michael L. Free i Zhigang Zak Fang. "Production of Titanium Hydride Powder by Leaching of Aluminum and Silicon Impurities from Reduced Upgraded Titania Slag for Low Cost Titanium Production". W TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings, 711–19. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274896.ch85.
Pełny tekst źródłaGiustiniani, Michela, i Umberta Tinivella. "Gas Hydrates in Antarctica". W Glaciers and Polar Environment [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.94306.
Pełny tekst źródłaO. Ilomuanya, Margaret, Ibilola M. Cardoso-Daodu, Uloma N. Ubani-Ukoma i Adannaya C. Adebona. "Polymeric Biomaterials for Wound Healing Incorporating Plant Extracts and Extracellular Matrix Components". W Wound Healing [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98556.
Pełny tekst źródłaHammad Rasool, Muhammad, i Maqsood Ahmad. "Deep Eutectic Solvents as a New Frontier in Drilling Fluid Design: Opportunities and Challenges". W Solvents - Dilute, Dissolve, and Disperse [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.1001905.
Pełny tekst źródłaMcdowell, K., i J. D. Doll. "Quantum Monte Carlo and the Hydride Ion". W Quantum Monte Carlo, 20. Oxford University PressNew York, NY, 2007. http://dx.doi.org/10.1093/oso/9780195310108.003.0020.
Pełny tekst źródłaFernández Palomeque, Efrén, Diego Rojas Hiedra, Daniel Cordero i Martín Espinoza. "The Second Life of Hybrid Electric Vehicles Batteries Methodology of Implementation in Ecuador". W Energy Storage Devices [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99058.
Pełny tekst źródłaErfani Agah, Ali. "Numerical Modeling of Soil Water Flow and Nitrogen Dynamics in a Tomato Field Irrigated with Municipal Wastewater". W Recent Advances on Numerical Simulations [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98487.
Pełny tekst źródłaTyagi, Nidhi, Gongutri Borah, Pitambar Patel i Danaboyina Ramaiah. "Recent Advances in Ru Catalyzed Transfer Hydrogenation and Its Future Perspectives". W Ruthenium - an Element Loved by Researchers [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.96464.
Pełny tekst źródłaMcdowell, K. "Assessing the Quality of a Wavefunction using Quantum Monte Carlo". W Quantum Monte Carlo, 20. Oxford University PressNew York, NY, 2007. http://dx.doi.org/10.1093/oso/9780195310108.003.0021.
Pełny tekst źródła