Książki na temat „High fatigue cycles”

Christ, Hans-Jürgen, red. Fatigue of Materials at Very High Numbers of Loading Cycles. Wiesbaden: Springer Fachmedien Wiesbaden, 2018. http://dx.doi.org/10.1007/978-3-658-24531-3.

Zhu, Dongming. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. Washington, D.C: National Aeronautics and Space Administration, 1997.

1947-, Miller Robert A., i United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., red. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Inforamtion Program, 1997.

Van, Ky Dang, i Ioannis Vassileiou Papadopoulos, red. High-Cycle Metal Fatigue. Vienna: Springer Vienna, 1999. http://dx.doi.org/10.1007/978-3-7091-2474-1.

Dang, Van Ky, i Papadopoulos Iōannēs V, red. High-cycle metal fatique: From theory to applications. Wien: Springer, 1999.

Herda, D. A. A comparison of high cycle fatigue methodologies. [Marshall Space Flight Center, Ala.]: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1992.

Hall, Rodney H. F. Crack growth under combined high and low cycle fatigue. Portsmouth: Portsmouth Polytechnic, School of Systems Engineering, 1991.

A, Miller Robert, i Lewis Research Center, red. Investigation of thermal high cycle and low cycle fatigue mechanisms of thick thermal barrier coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

A, Miller Robert, i Lewis Research Center, red. Investigation of thermal high cycle and low cycle fatigue mechanisms of thick thermal barrier coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

United States. National Aeronautics and Space Administration., red. Estimation of high temperature low cycle fatigue on the basis of inelastic strain and strainrate. [Washington, DC] : National Aeronautics and Space Administration: For sale by the National Technical Information Service, 1986.

Berkovits, Avraham. Estimation of high temperature low cycle fatigue on the basis of inelastic strain and strainrate. [Washington, DC] : National Aeronautics and Space Administration: For sale by the National Technical Information Service, 1986.

1944-, Boyce Lola, i United States. National Aeronautics and Space Administration., red. Probabilistic material strength degradation model for Inconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Taghani, Nourberdi. Crack growth in gas turbine alloys due to high cycle fatigue. Portsmouth: Portsmouth Polytechnic, Dept. of Mechanical Engineering, 1989.

Kolenda, Janusz. Analytical procedures of high-cycle fatigue assessment of structural steel elements. Gdańsk: Technical University of Gdańsk, 1997.

S, Manson S., Halford Gary R i United States. National Aeronautics and Space Administration., red. Environmental degradation of 316 stainless steel in high temperature low cycle fatigue. [Washington, DC]: National Aeronautics and Space Administration, 1987.

Kensche, Christoph W. High cycle fatigue of glass fibre reinforced epoxy materials for wind turbines. Köln: Deutsche Forschungsanstalt für Luft- Und Raumfahrt, 1992.

Rosenberg, T. D. A compilation of fatigue test results for welded joints subjected to high stress/low cycle conditions: Stage 1. London: HMSO, 1991.

D, Baust Henry, Agrell Johan i NASA Glenn Research Center, red. Management of total pressure recovery, distortion and high cycle fatigue in compact air vehicle inlets. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2002.

S, Srivatsan T., ASM International, Minerals, Metals and Materials Society, Minerals, Metals and Materials Society. Structural Materials Division i ASM's Materials Week '97 (1997 : Indianapolis, Indiana), red. High cycle fatigue of structural materials: Symposium Proceedings in honor of: Professor Paul C. Paris : proceedings of a symposium held during Materials Week '97 in Indianapolis, IN, September 14-18, 1997. Warrendale, Pennsylvania: TMS, 1997.

1944-, Boyce Lola, i United States. National Aeronautics and Space Administration., red. Probabilistic material strength degradation model for Iconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects: Final technical report of project entitled Development of advanced methodologies for probabilistic constitutive relationships of material strength models, phase 5 and 6. San Antonio, TX: Division of Engineering, University of Texas at San Antonio, 1995.

1944-, Boyce Lola, i United States. National Aeronautics and Space Administration., red. Probabilistic material strength degradation model for Iconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects: Final technical report of project entitled Development of advanced methodologies for probabilistic constitutive relationships of material strength models, phase 5 and 6. San Antonio, TX: Division of Engineering, University of Texas at San Antonio, 1995.

1930-, Paris P. C., Soboyejo W. O, Srivatsan T. S i Minerals, Metals and Materials Society. Structural Materials Division., red. High cycle fatigue of structural materials: Symposium proceedings in honor of Professor Paul C. Paris : proceedings of a symposium sponsored by the Structural Materials Division (SMD) of the Minerals, Metals and Materials Society (TMS) held during Materials Week '97 in Indianapolis, IN, September 14-18, 1997, hosted by the Minerals, Metals and Materials Society and ASM International. Warrendale, Pa: The Society, 1997.

Christ, Hans-Jürgen. Fatigue of Materials at Very High Numbers of Loading Cycles: Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment. Springer, 2018.

High Cycle Fatigue. Elsevier, 2006. http://dx.doi.org/10.1016/b978-0-08-044691-2.x5000-0.

Prof Jaime Tupiassu Pinho de Castro, Prof Marco Antonio Meggiolaro i Prof Timothy Hamilton Topper. Fatigue Design Techniques: Vol. I - High-Cycle Fatigue. Createspace Independent Publishing Platform, 2016.

Wang, Qingyuan. Advances in Very High Cycle Fatigue. Trans Tech Publications, Limited, 2016.

Wang, Qing Yuan. Advances in Very High Cycle Fatigue. Trans Tech Publications, Limited, 2015.

Wang, Qingyuan. Advances in Very High Cycle Fatigue. Trans Tech Publications Ltd, 2015. http://dx.doi.org/10.4028/b-1x6sfu.

Marquis, Gary B. High cycle spectrum fatigue of welded components. 1995.

Nicholas, Theodore. High Cycle Fatigue: A Mechanics of Materials Perspective. Elsevier Science, 2006.

Nicholas, Theodore. High Cycle Fatigue: A Mechanics of Materials Perspective. Elsevier Science & Technology Books, 2006.

Nicholas, Theodore. High Cycle Fatigue: A Mechanics of Materials Perspective. Elsevier Science, 2006.

Van, Ky Dang, i Ioannis V. Paradopoulos. High-Cycle Metal Fatigue: From Theory to Applications. Springer London, Limited, 2014.

(Editor), Ky Dang Van, i Ioannis V. Paradopoulos (Editor), red. High-Cycle Metal Fatigue: From Theory to Applications (CISM International Centre for Mechanical Sciences). Springer, 2003.

Exposure time considerations in high temperature low cycle fatigue. [Washington, DC: National Aeronautics and Space Administration, 1987.

Gauthier, J. P. High Cycle Fatigue of Austenitic Stainless Steels: Final Report. European Communities / Union (EUR-OP/OOPEC/OPOCE), 1990.

Jones, J. Wayne, James M. Larsen, John E. Allison i Robert O. Ritchie. Fourth International Conference on Very High Cycle Fatigue (VHCF-4). Wiley & Sons, Incorporated, John, 2007.

Manson, S. S., i G. R. Halford. Fatigue and Durability of Metals at High Temperatures. ASM International, 2009. http://dx.doi.org/10.31399/asm.tb.fdmht.9781627083430.

Probabilistic material strength degradation model for Inconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Burger, Sofie. High Cycle Fatigue of Al and Cu Thin Films by a Novel High-Throughput Method. KIT Scientific Publishing, 2013.

DePiero, Anthony H. High cycle fatigue modeling and analysis for deck floor truss connection details. 1997.

National Aeronautics and Space Administration (NASA) Staff. High Cycle Fatigue Crack Initiation Study of Case Blade Alloy Rene 125. Independently Published, 2018.

National Aeronautics and Space Administration (NASA) Staff. High-Cycle Fatigue Behavior of a Nicalon(tm)/Si-N-C Composite. Independently Published, 2018.

Effects of Shot-Peening on High Cycle Fretting Fatigue Behavior of Ti- 6Al-4V. Storming Media, 2002.

(Editor), W. O. Soboyejo, i T. S. Srivatsan (Editor), red. High Cycle Fatigue of Structural Materials: Symposium Proceedings in Honor of Professor Paul C. Paris. Minerals, Metals, & Materials Society, 1998.

Straub, Thomas. Experimental Investigation of Crack Initiation in Face-Centered Cubic Materials in the High and Very High Cycle Fatigue Regime. Saint Philip Street Press, 2020.

Eslami, Reza. A Novel Micro-mechanical Model for Prediction of Multiaxial High Cycle Fatigue at Small Scales. Saint Philip Street Press, 2020.

The Development of a Finite Element Program to Model High Cycle Fatigue in Isotropic Plates. Storming Media, 2001.

Effects of Foreign Object Damage From Small Hard Particles on the High- Cycle Fatigue Life of Ti-6Al-4V. Storming Media, 1999.

Andrews, R. M., T. D. Rosenberg i T. R. Gurney. A Compilation of Fatigue Test Results for Welded Joints Subjected to High Stress/Low Cycle Conditions <196> Stage 1 (Offshore Technology Information). Stationery Office Books, 1991.