Zaloguj się

Gotowe bibliografie tematyczne / Heavy ion beam

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Heavy ion beam”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Heavy ion beam”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Heavy ion beam"

1

Dietrich, K. G., K. Mahrt-Olt, J. Jacoby, E. Boggasch, M. Winkler, B. Heimrich i D. H. H. Hoffmann. "Beam–plasma interaction experiments with heavy-ion beams". Laser and Particle Beams 8, nr 4 (grudzień 1990): 583–93. http://dx.doi.org/10.1017/s0263034600009010.

Pełny tekst źródła

Streszczenie:

The progress of the experimental research program at GSI for studying beam-plasma interaction phenomena is reported. Heavy-ion beams from the new accelerator facility SIS/ESR at GSI-Darmstadt are now available for experiments, and will soon deliver ≥ 109 particles per pulse in 100 ns. Focused on a small sample of matter, the beams will be able to produce a high-density plasma and to permit investigation of interaction processes of heavy ions with hot ionized matter.For the intense beam from the new heavy-ion synchrotron (SIS), a fine-focus system has been designed to produce a high specific deposition power beam for target experiments with a beam-spot radius of 100 μm. We further discuss improvements of this lens system by nonconventional focusing devices such as plasma lenses.Intense-beam experiments at the RFQ Maxilac accelerator at GSI have already produced the first heavy-ion-induced plasma with a temperature of 0.75 eV. New diagnostic techniques for investigating ion-beam-induced plasmas are presented. The low-intensity beam from the GSI UNILAC has been used to measure energy deposition profiles of heavy ions in hot ionized matter. In this experiment an enhancement of the stopping power for heavy ions was observed. The current experimental research program tests basic plasma theory and addresses key issues of inertial confinement fusion driven by intense heavy-ion beams.

Style APA, Harvard, Vancouver, ISO itp.

2

Someya, Tetsuo, Aleksandar Ogoyski, Shigeo Kawata i Toru Sasaki. "Heavy Ion Beam Illumination Uniformity in Heavy Ion Beam Inertial Confinement Fusion". IEEJ Transactions on Fundamentals and Materials 124, nr 1 (2004): 85–90. http://dx.doi.org/10.1541/ieejfms.124.85.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Ulrich, A., B. Busch, H. Eylers, W. Krötz, R. Miller, R. Pfaffenberger, G. Ribitzki, J. Wieser i D. E. Murnick. "Lasers pumped by heavy-ion beams". Laser and Particle Beams 8, nr 4 (grudzień 1990): 659–77. http://dx.doi.org/10.1017/s0263034600009071.

Pełny tekst źródła

Streszczenie:

General aspects of the excitation of matter with heavy-ion beams are discussed. Lasers in the wavelength region between 1 and 3 μm in rare-gas mixtures pumped with 1.9-GeV xenon, 100-MeV sulphur, 3.6-MeV argon, and 3.3-MeV helium ions are described as examples for lasers pumped by heavy-ion beams. The beam power ranges from a few watts (dc) to about 1 MW during short pulses of about 1-ns length. Optical gain can be measured with an intracavity method. Data on the shape of the volume excited by a 100- MeV 32S beam are shown. An experimental setup for time-resolved optical spectroscopy in a wide wavelength region between a few nanometers and about 700 nm is described. Emission spectra of rare gases excited by heavy-ion beams are discussed and optical gain on ion lines and excimer bands is estimated for different target and beam parameters. Collisional processes in the target gas were studied by time-resolved optical spectroscopy. Population densities of selected 3p levels in Ne I, II, and IV and rate constants for collisional depopulation of excited levels were determined. Experiments planned at the heavy-ion synchrotron SIS at Gesellschaft für Schwerionenforschung in Darmstadt are discussed.

Style APA, Harvard, Vancouver, ISO itp.

4

Rubbia, Carlo. "Heavy-ion accelerators for inertial confinement fusion". Laser and Particle Beams 11, nr 2 (czerwiec 1993): 391–414. http://dx.doi.org/10.1017/s0263034600004985.

Pełny tekst źródła

Streszczenie:

Two concepts have been applied to the classical problem of accelerators for the ignition of indirectly driven inertial fusion. The first is the use of non-Liouvillian stacking based on photoionisation of a singly charged ion beam. A special FEL appears the most suited device to generate the appropriate light beam intensity at the required wavelength. The second is based on the use of a large number of (>1000) beamlets–or “beam straws”–all focussed by an appropriate magnetic structure and concentrated on the same spot on the pellet. The use of a large number of beams–each with a relatively low-current density–elegantly circumvents the problems of space charge, making use of the non-Liouvillian nature of the stopping power of the material of the pellet. The present conceptual design is based on a low-current (〈i〉 ≈ 50 mA) heavy-ion beam accelerated with a standard LINAC structure and accumulated in a stack of rings with the help of photoionisation. Beams are then extracted simultaneously from all the rings and further subdivided with the help of a switchyard of alternate paths separating and synchronising the many bunches from each ring before they hit the pellet. Single beam straws carry a reasonable number of ions: Beams and technology are directly relatable to the ones presently employed, for instance, at the CERN-PS. Space-charge-dominated conditions arise only during the last few turns before extraction and in the beam transport channel to the reaction chamber. In a practical example, we aim at a peak power of 500 TW delivered to the pellet for a duration of 10–15 ns. High-energy (10 GeV) beam straws of Ba doubly ionised ions are concentrated on several (four) focal spots of a radius of about 1 mm. The power density deposited on these tiny cylindrical absorbers inside a hermetic “hohlraum” is about 2.5 × 1016 w/g. These conditions are believed to be optimal for X-ray conversion, i.e., with an estimated conversion efficiency of about 90%.

Style APA, Harvard, Vancouver, ISO itp.

5

BRÄUNING, H., A. DIEHL, K. v. DIEMAR, A. THEIß, R. TRASSL, E. SALZBORN i I. HOFMANN. "Charge-changing ion–ion collisions in heavy ion fusion". Laser and Particle Beams 20, nr 3 (lipiec 2002): 493–95. http://dx.doi.org/10.1017/s0263034602203262.

Pełny tekst źródła

Streszczenie:

In heavy ion fusion, the compression of the DT pellet requires high intensity beams of ions in the gigaelectron volt energy range. Charge-changing collisions due to intrabeam scattering can have a high impact on the design of adequate accelerator and storage rings. Not only do intensity losses have to be taken into account, but also the deposition of energy on the beam lines after bending magnets, for example, may be nonnegligible. The center-of-mass energy for these intrabeam collisions is typically in the kiloelectron volt range for beam energies in the order of several gigaelectron volts. In this article, we present experimental cross sections for charge transfer and ionization in homonuclear collisions of Ar4+, Kr4+, and Xe4+, and for charge transfer only in homonuclear collisions of Pb4+ and Bi4+. Using a hypothetical 100-Tm synchrotron as an example, expected particle losses are calculated based on the experimental data. The results are compared with expectations for singly charged Bi+ ions, which are usually considered for heavy ion fusion.

Style APA, Harvard, Vancouver, ISO itp.

6

Okamura, Masahiro, Megumi Sekine, Shunsuke Ikeda, Takeshi Kanesue, Masafumi Kumaki i Yasuhiro Fuwa. "Preliminary result of rapid solenoid for controlling heavy-ion beam parameters of laser ion source". Laser and Particle Beams 33, nr 2 (13.03.2015): 137–41. http://dx.doi.org/10.1017/s026303461500004x.

Pełny tekst źródła

Streszczenie:

AbstractTo realize a heavy-ion inertial fusion (HIF) driver, we have studied a possibility of laser ion source (LIS). A LIS can provide high-current high-brightness heavy-ion beams; however, it was difficult to manipulate the beam parameters. To overcome the issue, we employed a pulsed solenoid in the plasma drift section and investigated the effect of the solenoid field on singly charged iron beams. The rapid ramping magnetic field could enhance limited time slice of the current and simultaneously the beam emittance changed accordingly. This approach may also be useful to realize an ion source for HIF power plant.

Style APA, Harvard, Vancouver, ISO itp.

7

Bock, R. "German heavy-ion ICF activities: Status and prospects". Laser and Particle Beams 8, nr 4 (grudzień 1990): 563–73. http://dx.doi.org/10.1017/s0263034600008995.

Pełny tekst źródła

Streszczenie:

The main goals of the German program are the study of key issues of inertial fusion with intense beams of heavy ions. The completion of the new heavy-ion synchrotron and storage ring facility SIS/ESR at GSI opens new directions for experimental investigations on beam dynamics at high intensity and on beam/target interaction. In addition, new accelerator scenarios will be investigated based on non-Liouvillean beam-handling techniques.

Style APA, Harvard, Vancouver, ISO itp.

8

Niu, K., P. Mulser i L. Drska. "Beam generations of three kinds of charged particles". Laser and Particle Beams 9, nr 1 (marzec 1991): 149–65. http://dx.doi.org/10.1017/s0263034600002391.

Pełny tekst źródła

Streszczenie:

Analyses are given for beam generations of three kinds of charged particles: electrons, light ions, and heavy ions. The electron beam oscillates in a dense plasma irradiated by a strong laser light. When the frequency of laser light is high and its intensity is large, the acceleration of oscillating electrons becomes large and the electrons radiate electromagnetic waves. As the reaction, the electrons feel a damping force, whose effect on oscillating electron motion is investigated first. Second, the electron beam induces the strong electromagnetic field by its self-induced electric current density when the electron number density is high. The induced electric field reduces the oscillation motion and deforms the beam.In the case of a light ion beam, the electrostatic field, induced by the beam charge, as well as the electromagnetic field, induced by the beam current, affects the beam motion. The total energy of the magnetic field surrounding the beam is rather small in comparison with its kinetic energy.In the case of heavy ion beams the beam charge at the leading edge is much smaller in comparison with the case of light ion beams when the heavy ion beam propagates in the background plasma. Thus, the induced electrostatic and electromagnetic fields do not much affect the beam propagation.

Style APA, Harvard, Vancouver, ISO itp.

9

NEFF, S., R. KNOBLOCH, D. H. H. HOFFMANN, A. TAUSCHWITZ i S. S. YU. "Transport of heavy-ion beams in a 1 m free-standing plasma channel". Laser and Particle Beams 24, nr 1 (marzec 2006): 71–80. http://dx.doi.org/10.1017/s0263034606060125.

Pełny tekst źródła

Streszczenie:

The transport of high-current heavy-ion beams in plasma channels is a promising option for the final transport in a heavy-ion fusion reactor, since it simplifies the construction of the reactor chamber significantly. Our experiments at the Gesellschaft für Schwerionenforschung demonstrate the creation of 1 m long stable plasma channels and the transport of heavy-ion beams. The article outlines the experimental setup used at GSI and reports the results of beam transport measurements using these long channels. The experiments demonstrate good beam transport properties of the channel, indicating that channel transport is a viable alternative to neutralized-ballistic transport.

Style APA, Harvard, Vancouver, ISO itp.

10

KAWATA, Shigeo, Tatsuya KUROSAKI, Shunsuke KOSEKI, Kenta NOGUCHI, Daisuke BARADA, Alexander Ivanov OGOYSKI, John J. BARNARD i B. Grant LOGAN. "Wobbling Heavy Ion Beam Illumination in Heavy Ion Inertial Fusion". Plasma and Fusion Research 8 (2013): 3404048. http://dx.doi.org/10.1585/pfr.8.3404048.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Heavy ion beam"

1

Takeiri, Yasuhiko. "Intense heavy negative-ion beam production and negative ion beam deposition". Kyoto University, 1988. http://hdl.handle.net/2433/162219.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Penache, Dan Lucius. "Heavy ion beam transport in laser initiated high current gas discharge channels". Phd thesis, [S.l.] : [s.n.], 2002. http://elib.tu-darmstadt.de/diss/000245.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Rojko, Roman. "New concepts for transverse beam stability in high-current heavy-ion synchrotrons". Phd thesis, Berlin : Dissertation.de, 2003. http://elib.tu-darmstadt.de/diss/000382.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Neff, Stephan. "Heavy-ion beam transport in plasma channels transport properties and channel stability /". [S.l. : s.n.], 2005. http://elib.tu-darmstadt.de/diss/000561.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Chen, Geng-Sheng. "Ion beam mixing of Mo/Al bilayer samples and thermal spike effects". Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/94500.

Pełny tekst źródła

Streszczenie:

Metallic bilayer samples of Mo(400 Å)/ Al(substrate) were characterized using Rutherford Backscattering Spectroscopy after first being irradiated with Xe ion beam having an energy of 1.8 MeV. The computer code RUMP was then used to simulate the RBS spectra. The interdiffusion at the interface was considered in terms of thermal spike induced atomic migration. It was found that the coupling of the chemical effect with spike is significant with regard to mixing of the bilayer samples. Furthermore, in addition to the initial contamination of carbon atoms on the surface and at the interface, more carbon atoms were found to be picked up by the surface, this carbon w.as from the vacuum pumps and tended to migrate into the surface once irradiation dose exceeded 11 x 10¹⁵cm². A semi-empirical model was developed for ion beam mixing taking into account collisional mixing and thermal spike effects, as well as the thermal spike shape. The collisional mixing part was accounted for by the Kinchin-Pease model, or, alternatively dynamic Monte Carlo simulation. For the thermal spike, the ion beam mixing parameter Dt/Φ was derived to be proportional to ( - F_D /ΔH_coh)^2+μ, where F_D is the damage energy deposited per unit path length, ΔH_coh is the cohesive energy of the target materials, and µ is a constant dependent on the spike shape and point defect density in the spike regions. The thermal spike introduces a nonlinear effect in the mixing process, distinguishing itself from the linear effect of ballistic mixing. The shape of the thermal spike that best fit the experimental results depends on the magnitude of the cascade density. For relatively high density collisional cascades, where thermal spikes start to be important, it was found that a spherical spike model was more consistent with experimental measurements at low temperatures. However, for extremely high density collisional cascade regions, a cylindrical shaped spike gave better results. The atomic migration energy in the spike regions is scaled by a factor of one out of 8.6 of cohesive energy. The migration mechanism was recognized to be interstitial-dominated one.
M.S.

Style APA, Harvard, Vancouver, ISO itp.

6

Manuel, Jack Elliot. "Design, Construction, and Application of an Electrostatic Quadrupole Doublet for Heavy Ion Nuclear Microprobe Research". Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1062819/.

Pełny tekst źródła

Streszczenie:

A nuclear microprobe, typically consisting of 2 - 4 quadrupole magnetic lenses and apertures serving as objective and a collimating divergence slits, focuses MeV ions to approximately 1 x 1 μm for modification and analysis of materials. Although far less utilized, electrostatic quadrupole fields similarly afford strong focusing of ions and have the added benefit of doing so independent of ion mass. Instead, electrostatic quadrupole focusing exhibits energy dependence on focusing ions. A heavy ion microprobe could extend the spatial resolution of conventional microprobe techniques to masses untenable by quadrupole magnetic fields. An electrostatic quadrupole doublet focusing system has been designed and constructed using several non-conventional methods and materials for a wide range of microprobe applications. The system was modeled using the software package "Propagate Rays and Aberrations by Matrices" which quantifies system specific parameters such as demagnification and intrinsic aberrations. Direct experimental verification was obtained for several of the parameters associated with the system. Details of the project and with specific applications of the system are presented.

Style APA, Harvard, Vancouver, ISO itp.

7

Johnson, Samantha. "Optimizing the ion source for polarized protons". Thesis, University of the Western Cape, 2005. http://etd.uwc.ac.za/index.php?module=etd&amp.

Pełny tekst źródła

Streszczenie:

Beams of polarized protons play an important part in the study of the spin dependence of the nuclear force by measuring the analyzing power in nuclear reactions. The source at iThemba LABS produces a beam of polarized protons that is pre-accelerated by an injector cyclotron (SPC2) to a energy of 8 MeV before acceleration by the main separated-sector cyclotron to 200 MeV for physics research. The polarized ion source is one of the two external ion sources of SPC2. Inside the ion source hydrogen molecules are dissociated into atoms in the dissociator and cooled to a temperature of approximately 30 K in the nozzle. The atoms are polarized by a pair of sextupole magnets and the nucleus is polarized by RF transitions between hyperfine levels in hydrogen atoms. The atoms are then ionized by electrons in the ionizer. The source has various sensitive devices, which influence beam intensity and polarization. Nitrogen gas is used to prevent recombination of atoms after dissociation. The amount of nitrogen and the temperature at which it is used plays a very important role in optimizing the beam current. The number of electrons released in the ionizer is influenced by the size and shape of the filament. Optimization of the source will ensure that beams of better quality (a better current and stability) are produced.

Style APA, Harvard, Vancouver, ISO itp.

8

Crespo, Paulo. "Optimization of In-Beam Positron Emission Tomography for Monitoring Heavy Ion Tumor Therapy". Forschungszentrum Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-28512.

Pełny tekst źródła

Streszczenie:

In-beam positron emission tomography (in-beam PET) is currently the only method for an in-situ monitoring of highly tumor-conformed charged hadron therapy. In such therapy, the clinical effect of deviations from treatment planning is highly minimized by implementing safety margins around the tumor and selecting proper beam portals. Nevertheless, in-beam PET is able to detect eventual, undesirable range deviations and anatomical modifications during fractionated irradiation, to verify the accuracy of the beam portal delivered and to provide the radiotherapist with an estimation of the difference in dosage if the treatment delivered differs from the planned one. In a first study within this work, a set of simulation and fully-3D reconstruction routines shows that minimizing the opening angle of a cylindrical camera is determinant for an optimum quality of the in-beam PET images. The study yields two favorite detector geometries: a closed ring or a dual-head tomograph with narrow gaps. The implementation of either detector geometry onto an isocentric, ion beam delivery (gantry) is feasible by mounting the PET scanner at the beam nozzle. The implementation of an in-beam PET scanner with the mentioned detector geometries at therapeutic sites with a fixed, horizontal beam line is also feasible. Nevertheless, knowing that previous in-beam PET research in Berkeley was abandoned due to detector activation (Bismuth Germanate, BGO), arising most probably from passive beam shaping contaminations, the proposed detector configurations had to be tested in-beam. For that, BGO was substituted with a state-of-the-art scintillator (lutetium oxyorthosilicate, LSO) and two position sensitive detectors were built. Each detector contains 32 pixels, consisting of LSO finger-like crystals coupled to avalanche photodiode arrays (APDA). In order to readout the two detectors operated in coincidence, either in standalone mode or at the GSI medical beam line, a multi-channel, zero-suppressing free, list mode data acquisition system was built.The APDA were chosen for scintillation detection instead of photomultiplier tubes (PMT) due to their higher compactness and magnetic field resistance. A magnetic field resistant detector is necessary if the in-beam PET scanner is operated close to the last beam bending magnet, due to its fringe magnetic field. This is the case at the isocentric, ion beam delivery planned for the dedicated, heavy ion hospital facility under construction in Heidelberg, Germany. In-beam imaging with the LSO/APDA detectors positioned at small target angles, both upbeam and downbeam from the target, was successful. This proves that the detectors provide a solution for the proposed next-generation, improved in-beam PET scanners. Further confirming this result are germanium-detector-based, spectroscopic gamma-ray measurements: no scintillator activation is observed in patient irradiation conditions. Although a closed ring or a dual-head tomograph with narrow gaps is expected to provide improved in-beam PET images, low count rates in in-beam PET represent a second problem to image quality. More importantly, new accelerator developments will further enhance this problem to the point of making impossible in-beam PET data taking if the present acquisition system is used. For these reasons, two random-suppression methods allowing to collect in-beam PET events even during particle extraction were tested. Image counts raised almost twofold. This proves that the methods and associated data acquisition technique provide a solution for next-generation, in-beam positron emission tomographs installed at synchrotron or cyclotron radiotherapy facilities.

Style APA, Harvard, Vancouver, ISO itp.

9

Crespo, Paulo. "Optimization of In-Beam Positron Emission Tomography for Monitoring Heavy Ion Tumor Therapy". Forschungszentrum Rossendorf, 2006. https://hzdr.qucosa.de/id/qucosa%3A21679.

Pełny tekst źródła

Streszczenie:

In-beam positron emission tomography (in-beam PET) is currently the only method for an in-situ monitoring of highly tumor-conformed charged hadron therapy. In such therapy, the clinical effect of deviations from treatment planning is highly minimized by implementing safety margins around the tumor and selecting proper beam portals. Nevertheless, in-beam PET is able to detect eventual, undesirable range deviations and anatomical modifications during fractionated irradiation, to verify the accuracy of the beam portal delivered and to provide the radiotherapist with an estimation of the difference in dosage if the treatment delivered differs from the planned one. In a first study within this work, a set of simulation and fully-3D reconstruction routines shows that minimizing the opening angle of a cylindrical camera is determinant for an optimum quality of the in-beam PET images. The study yields two favorite detector geometries: a closed ring or a dual-head tomograph with narrow gaps. The implementation of either detector geometry onto an isocentric, ion beam delivery (gantry) is feasible by mounting the PET scanner at the beam nozzle. The implementation of an in-beam PET scanner with the mentioned detector geometries at therapeutic sites with a fixed, horizontal beam line is also feasible. Nevertheless, knowing that previous in-beam PET research in Berkeley was abandoned due to detector activation (Bismuth Germanate, BGO), arising most probably from passive beam shaping contaminations, the proposed detector configurations had to be tested in-beam. For that, BGO was substituted with a state-of-the-art scintillator (lutetium oxyorthosilicate, LSO) and two position sensitive detectors were built. Each detector contains 32 pixels, consisting of LSO finger-like crystals coupled to avalanche photodiode arrays (APDA). In order to readout the two detectors operated in coincidence, either in standalone mode or at the GSI medical beam line, a multi-channel, zero-suppressing free, list mode data acquisition system was built.The APDA were chosen for scintillation detection instead of photomultiplier tubes (PMT) due to their higher compactness and magnetic field resistance. A magnetic field resistant detector is necessary if the in-beam PET scanner is operated close to the last beam bending magnet, due to its fringe magnetic field. This is the case at the isocentric, ion beam delivery planned for the dedicated, heavy ion hospital facility under construction in Heidelberg, Germany. In-beam imaging with the LSO/APDA detectors positioned at small target angles, both upbeam and downbeam from the target, was successful. This proves that the detectors provide a solution for the proposed next-generation, improved in-beam PET scanners. Further confirming this result are germanium-detector-based, spectroscopic gamma-ray measurements: no scintillator activation is observed in patient irradiation conditions. Although a closed ring or a dual-head tomograph with narrow gaps is expected to provide improved in-beam PET images, low count rates in in-beam PET represent a second problem to image quality. More importantly, new accelerator developments will further enhance this problem to the point of making impossible in-beam PET data taking if the present acquisition system is used. For these reasons, two random-suppression methods allowing to collect in-beam PET events even during particle extraction were tested. Image counts raised almost twofold. This proves that the methods and associated data acquisition technique provide a solution for next-generation, in-beam positron emission tomographs installed at synchrotron or cyclotron radiotherapy facilities.

Style APA, Harvard, Vancouver, ISO itp.

10

Franich, Rick, i rick franich@rmit edu au. "Monte Carlo Simulation of Large Angle Scattering Effects in Heavy Ion Elastic Recoil Detection Analysis and Ion Transmission Through Nanoapertures". RMIT University. Applied Sciences, 2007. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080212.121837.

Pełny tekst źródła

Streszczenie:

Heavy Ion Elastic Recoil Detection Analysis (HIERDA) is a versatile Ion Beam Analysis technique well suited to multi-elemental depth profiling of thin layered structures and near-surface regions of materials. An existing limitation is the inability to accurately account for the pronounced broadening and tailing effects of multiple scattering typically seen in HIERDA spectra. This thesis investigates the role of multiple large angle scattering in heavy ion applications such as HIERDA, and seeks to quantify its contribution to experimental output. This is achieved primarily by the development of a computer simulation capable of predicting these contributions and using it to classify and quantify the interactions that cause them. Monte Carlo ion transport simulation is used to generate simulated HIERDA spectra and the results are compared to experimental data acquired using the Time of Flight HIERDA facility at the Australian Nuclear Science and Technology Organisat ion. A Monte Carlo simulation code was adapted to the simulation of HIERDA spectra with considerable attention on improving the modelling efficiency to reduce processing time. Efficiency enhancements have achieved simulation time reductions of two to three orders of magnitude. The simulation is shown to satisfactorily reproduce the complex shape of HIERDA spectra. Some limitations are identified in the ability to accurately predict peak widths and the absolute magnitude of low energy tailing in some cases. The code is used to identify the plural scattering contribution to the spectral features under investigation, and the complexity of plurally scattered ion and recoil paths is demonstrated. The program is also shown to be useful in the interpretation of overlapped energy spectra of elements of similar mass whose signals cannot be reliably separated experimentally. The effect of large angle scattering on the transmission of heavy ions through a nano-scale aperture mask, used to collimate an ion beam to a very small beam spot, is modelled using a version of the program adapted to handle the more complex geometry of the aperture mask. The effectiveness of nano-aperture collimation was studied for a variety of ion-energy combinations. Intensity, energy, and angular distributions of transmitted ions were calculated to quantify the degree to which scattering within the mask limits the spatial resolution achievable. The simulation successfully predicted the effect of misaligning the aperture and the beam, and the result has subsequently been observed experimentally. Transmitted ion distributions showed that the higher energy heavier ions studied are more effectively collimated than are lower energy lighter ions. However, there is still a significant probability of transmission of heavy ions with substantial residual energy beyond the perimeter of the aperture. For the intended application, ion beam lithography, these ions are likely to be problematic. The results indicate that medium energy He ions are the more attractive option, as the residual energy of scattered transmitted ions can be more readily managed by customising the etching process. Continuing research by experimentalists working in this area is proceeding in this direction as a result of the conclusions from this work.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Heavy ion beam"

1

United States. National Aeronautics and Space Administration., red. One dimensional heavy ion beam transport: Energy independent model. [Washington, D.C: National Aeronautics and Space Administration], 1990.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Edwards, David P. Some theoretical studies on the implosion and fusion burn of heavy ion beam driven ICF targets. Birmingham: University of Birmingham, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Workshop on the PS-Spin Collider (1992 Tsukuba-shi, Japan). Proceedings of the Workshop on the PS-Spin Collider: Jan. 31-Feb. 1, 1992, KEK, Tsukuba, Japan. Tsukuba-shi, Ibaraki-ken, Japan: National Laboratory for High Energy Physics, 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

M, Ishihara, Takigawa N. 1943- i Yamaji S, red. RIKEN International Workshop on Heavy-Ion Reactions with Neutron-Rich Beams, Wako, Japan, 18-20 February 1993. Singapore: World Scientific, 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Townsend, Lawrence W. An assessment of transport coefficient approximations used in galactic heavy ion shielding calculations. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

United States. National Aeronautics and Space Administration., red. Mutagenesis in human cells with accelerated H & Fe ions: Final summary of research programs. [Washington, DC: National Aeronautics and Space Administration, 1991.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

International Symposium on Heavy Ion Physics and its Applications (2nd 1995 Lanzhou, China). Proceedings of the second international symposium: Heavy ion physics and its applications : 29 August-1 September 1995, Lanzhou, China. Redaktorzy Luo Y. X. 1944-, Jin G. M. 1943- i Liu J. Y. 1936-. River Edge, NJ: World Scientific Publ., 1996.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

High, Energy and Heavy Ion Beams in Materials Analysis Workshop (1989 Albuquerque N. M. ). Proceedings: High Energy and Heavy Ion Beams in Materials Analysis Workshop, Albuquerque, New Mexico, June 14-16, 1989. Pittsburgh, Pa: Materials Research Society, 1990.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Schneider, V. A Two Dimensional Hydrodynamic Code for the Interaction of Intense Heavy Ion Beams with Matter Based on the Code Conchas Spray. Darmstadt: Gesellschaft fur Schwerionenforschung, 1988.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

The physics and radiobiology of fast neutron beams. Bristol: A. Hilger, 1989.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Heavy ion beam"

1

Elsässer, Thilo. "Modeling Heavy Ion Radiation Effects". W Ion Beam Therapy, 117–33. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21414-1_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Avasthi, D. K., i G. K. Mehta. "Ion Beam Analysis". W Swift Heavy Ions for Materials Engineering and Nanostructuring, 67–85. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1229-4_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Schmidke, William. "Ion Polarimetry". W Polarized Beam Dynamics and Instrumentation in Particle Accelerators, 285–300. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-16715-7_12.

Pełny tekst źródła

Streszczenie:

AbstractThe degree of polarization of the beams must be precisely measured, both to enable development and optimization of the beams, and to normalize the spin dependent effects observed in experiments. Ion beam polarimetry is particularly challenging since the physics processes available for polarimetry are themselves the subject of active physics research. This chapter describes ion polarimetry as implemented at the Relativistic Heavy Ion Collider (RHIC), the only high energy polarized proton collider.

Style APA, Harvard, Vancouver, ISO itp.

4

Shirkov, Grigori D., i Günter Zschornack. "Electron Beam Ion Sources". W Electron Impact Ion Sources for Charged Heavy Ions, 90–122. Wiesbaden: Vieweg+Teubner Verlag, 1996. http://dx.doi.org/10.1007/978-3-663-09896-6_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Wesch, Werner, Tobias Steinbach i Mark C. Ridgway. "Swift Heavy Ion Irradiation of Amorphous Semiconductors". W Ion Beam Modification of Solids, 403–40. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33561-2_10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Wesch, Werner, i Claudia S. Schnohr. "Swift Heavy Ion Irradiation of Crystalline Semiconductors". W Ion Beam Modification of Solids, 365–402. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33561-2_9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Martinson, Indrek. "Beam-Foil Spectroscopy". W Treatise on Heavy-Ion Science, 423–89. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4615-8100-0_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Kamada, Tadashi, i Hirohiko Tsujii. "HIMAC: A New Start for Heavy Ions". W Ion Beam Therapy, 611–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21414-1_36.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Schneider, D. H. G., J. Steiger, T. Schenkel i J. R. Crespo Lòpez-Urrutia. "Physics at the Electron Beam Ion Trap". W Atomic Physics with Heavy Ions, 30–59. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58580-7_2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Ribitzki, G., A. Ulrich, B. Busch, W. Krötz, R. Miller i J. Wieser. "Heavy ion beam excitation of rare gases". W Atomic Physics of Highly Charged Ions, 169–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-76658-9_38.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Heavy ion beam"

1

Ahle, Larry, i Harvey S. Hopkins. "Gated beam imager for heavy ion beams". W The eighth beam instrumentation workshop. AIP, 1998. http://dx.doi.org/10.1063/1.57036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Kikuchi, Takashi, Shigeo Kawata, Shigeru Kato, Susumu Hanamori i Masaru Yazawa. "Intense-heavy-ion-beam transport through an insulator beam guide for heavy ion fusion". W Space charge dominated beam physics for heavy ion fusion. AIP, 1999. http://dx.doi.org/10.1063/1.59495.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Wollnik, H., i J. Garrett. "Isobar separators for radioactive ion beam facilities". W HEAVY ION ACCELERATOR TECHNOLOGY. ASCE, 1999. http://dx.doi.org/10.1063/1.58993.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Zinkann, G. P., B. E. Clifft, J. A. Nolen, R. C. Pardo, C. E. Rehm i W. Q. Shen. "A very low intensity ion beam detector system". W HEAVY ION ACCELERATOR TECHNOLOGY. ASCE, 1999. http://dx.doi.org/10.1063/1.58949.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Bennett, J. R. J. "A radioactive ion beam facility , SIRIUS, at ISIS". W HEAVY ION ACCELERATOR TECHNOLOGY. ASCE, 1999. http://dx.doi.org/10.1063/1.58992.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Klein, Spencer R. "Nonlinear QED Effects in Heavy Ion Collisions". W 18th Advanced ICFA Beam Dynamics Workshop. WORLD SCIENTIFIC, 2002. http://dx.doi.org/10.1142/9789812777447_0026.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Zenkevich, P. R. "Transverse electron-ion instability in ion storage rings with high current". W Space charge dominated beam physics for heavy ion fusion. AIP, 1999. http://dx.doi.org/10.1063/1.59505.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Wutte, D., J. Burke, B. Fujikawa, P. Vetter, S. J. Freedman, R. A. Gough, C. M. Lyneis i Z. Q. Xie. "Development of a radioactive ion beam test stand at LBNL". W HEAVY ION ACCELERATOR TECHNOLOGY. ASCE, 1999. http://dx.doi.org/10.1063/1.58999.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Ruggiero, A. G. "The BNL heavy-ion beam facility". W The Physics of Particles Accelerators: Based in Part on the U.S. Particle Accelerator School (USPAS) Seminars and Courses in 1989 and 1990. AIP, 1992. http://dx.doi.org/10.1063/1.41974.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Peters, Andreas. "Beam diagnostics for the heavy ion cancer therapy facility". W The ninth beam instrumentation workshop. AIP, 2000. http://dx.doi.org/10.1063/1.1342625.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Heavy ion beam"

1

Luo, Y., W. Fischer i S. White. Beam-beam observations in the Relativistic Heavy Ion Collider. Office of Scientific and Technical Information (OSTI), czerwiec 2015. http://dx.doi.org/10.2172/1222607.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Ruggiero, A. G. The BNL Heavy-Ion Beam Facility. Office of Scientific and Technical Information (OSTI), styczeń 1991. http://dx.doi.org/10.2172/1118932.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Larry R. Grisham. Evaluation of Negative-Ion-Beam Driver Concepts for Heavy Ion Fusion. Office of Scientific and Technical Information (OSTI), styczeń 2002. http://dx.doi.org/10.2172/793000.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Lehrach A., A. U. Luccio, W. W. MacKay i T. Roser. Beam Polarization Distribution for the Relativistic Heavy Ion Collider. Office of Scientific and Technical Information (OSTI), grudzień 2000. http://dx.doi.org/10.2172/1061629.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Barboza, N. Heavy ion beam transport in an inertial confinement fusion reactor. Office of Scientific and Technical Information (OSTI), sierpień 1995. http://dx.doi.org/10.2172/132778.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Tsang, T., S. Bellavia, R. Connolly, D. Gassner, Y. Makdisi, T. Russo, P. Thieberger, D. Trbojevic i A. Zelenski. A new luminescence beam profile monitor for intense proton and heavy ion beams. Office of Scientific and Technical Information (OSTI), październik 2008. http://dx.doi.org/10.2172/945353.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Tsang T., D. Trbojevic, S. Bellavia, R. Connolly, D. Gassner, Y. Makdisi, T. Russo, P. Thieberger i A. Zelenski. A New Luminescence Beam Profile Monitor for Intense Proton and Heavy Ion Beams. Office of Scientific and Technical Information (OSTI), październik 2008. http://dx.doi.org/10.2172/1061920.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Fessenden, T. J., J. J. Barnard, M. D. Cable, F. J. Deadrick, S. Eylon, M. B. Nelson, T. C. Sangster i H. S. Hopkins. Intense heavy-ion beam transport with electric and magnetic quadrupoles. Office of Scientific and Technical Information (OSTI), sierpień 1995. http://dx.doi.org/10.2172/132777.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Grinenko, A., D. Gericke, J. Vorberger i S. Glenzer. Melting of Dense Hydrogen during Heavy Ion Beam-Driven Compression. Office of Scientific and Technical Information (OSTI), marzec 2009. http://dx.doi.org/10.2172/948976.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Luo Y., M. Brennan, W. Fischer, N. Kling, K. Mernick, T. Roser, C. Zimmer i S. Y. Zhang. Beam-beam effects with stochastic cooling in the 2012 RHIC 100 GeV heavy ion run. Office of Scientific and Technical Information (OSTI), wrzesień 2012. http://dx.doi.org/10.2172/1054180.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!