Gotowe bibliografie tematyczne / Heat Transmission

Gotowa bibliografia na temat „Heat Transmission”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 26 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Heat Transmission”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Heat Transmission"

1

Chang, Liang, Zhiwei Li, Sheng Li, Wenang Jia i Jian Ruan. "Heat Loss Analysis of a 2D Pump’s Transmission". Machines 10, nr 10 (26.09.2022): 860. http://dx.doi.org/10.3390/machines10100860.

Pełny tekst źródła
Streszczenie:
Highly enhanced pump power density inevitably results in a profound rise in pump temperature, which seriously influences both power loss and service performance. Heat loss analysis is an important part of analyzing the mechanical and cooling efficiency of a 2D piston pump. This paper focuses on heat loss analysis of this pump’s transmission. Firstly, theoretical and experimental studies are carried out on the thermal–hydraulic model to investigate the heat loss of the pump’s transmission. A pump test rig is developed and thermal experiments are conducted, from 1000 rpm to 6000 rpm. Furthermore, its transient thermal simulation model is implemented with Ansys software to capture the pump’s thermal status. The test convective heat transfer coefficients and temperature data are set in the model, and the simulation results are mutually validated with the experimental ones. Finally, the transmission’s heat loss is compared with its reference churning loss formula. The distribution of the transient heat loss is 49.66% into the end cap, 27.74% into the cylinder head, 13.30% into the inner cylinder, and 9.30% into the oil. The heat loss simulation results agree with the churning loss below 4000 rpm; therefore, the transmission thermal model is accurate and efficient.
Style APA, Harvard, Vancouver, ISO itp.
2

Willits, A. B. "HEAT TRANSMISSION AND TRANSMITTERS". Journal of the American Society for Naval Engineers 22, nr 1 (18.03.2009): 139–44. http://dx.doi.org/10.1111/j.1559-3584.1910.tb04546.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Quintanilla, R., i B. Straughan. "Explosive instabilities in heat transmission". Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 458, nr 2028 (8.12.2002): 2833–37. http://dx.doi.org/10.1098/rspa.2002.1009.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Cathcart, W. L. "HEAT LOSSES IN STEAM TRANSMISSION". Journal of the American Society for Naval Engineers 27, nr 3 (18.03.2009): 529–55. http://dx.doi.org/10.1111/j.1559-3584.1915.tb00539.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Marki, J., R. A. Pitts, T. Eich, A. Herrmann, J. Horacek, F. Sanchez i G. Veres. "Sheath heat transmission factors on TCV". Journal of Nuclear Materials 363-365 (czerwiec 2007): 382–88. http://dx.doi.org/10.1016/j.jnucmat.2007.01.197.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Sultan, M. A., T. Z. Harmathy i J. R. Mehaffey. "Heat transmission in fire test furnaces". Fire and Materials 10, nr 2 (czerwiec 1986): 47–55. http://dx.doi.org/10.1002/fam.810100202.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Cao, Wenbo, Fengxia Zhang, Jianhang Hu, Shiliang Yang, Huili Liu i Hua Wang. "DEM Investigation on the Flow and Heat Transmission Characteristics of Multi-Size Particles Mixed Flow in Moving Bed". Processes 12, nr 2 (18.02.2024): 408. http://dx.doi.org/10.3390/pr12020408.

Pełny tekst źródła
Streszczenie:
The moving bed heat exchanger (MBHE) has been widely applied in the recovery of waste heat of industrial particles. Currently, investigations focus on uniform-size particles in the MBHE, but few studies are conducted on multi-size particles produced by industrial granulation. Therefore, based on the discrete element method (DEM), the heat transmission model of multi-size particles is established, and flow and heat transmission processes of typically normal distribution particles in the MBHE are studied. In conclusion, there are significant differences in particles tangential velocity and contact number in local regions of a heat exchanger pipe, resulting in different local heat transmission coefficients. In addition, the increases in outlet particle velocity and inlet particle temperature significantly enhance the heat transmission. When the outlet particle velocity grows from 1 mm/s to 5 mm/s, the overall heat transmission coefficient increases by 36.4%, and as the inlet particle temperature rises from 473 K to 873 K, the overall heat transmission coefficient increases by 16.1%.
Style APA, Harvard, Vancouver, ISO itp.
8

Wang, Xi, Bin Chao Liu, Hong Yu Guan, Zhi Wen Cheng, Hong Ren Li i Yan Jiang. "Dynamic Transmission Experiment Research of Underground Heat Storage". Advanced Materials Research 322 (sierpień 2011): 328–32. http://dx.doi.org/10.4028/www.scientific.net/amr.322.328.

Pełny tekst źródła
Streszczenie:
The circular layout of the heat transfer soil tank experiments on the dynamic transmission of underground storage mechanism. By analyzing and comparing the dynamic and static, with or without heat shield of the storage conditions, explore ways to make a favorable energy storage ,which has better effect on energy injected and preservation. The results show that, compared to the static continuous loading , intermittent loading and storage with heat shield are more conducive to the storage of energy injected and improve the ability of cohesion of temperature field; controlling the ratio of the heat for the heat shield to the total load is the key issues on application of heat screen.
Style APA, Harvard, Vancouver, ISO itp.
9

Tso, C. P., S. C. Yap i K. S. Chan. "Heat transmission in cylindrical and spherical shells with exponential heat sources". Journal of Physics D: Applied Physics 23, nr 7 (14.07.1990): 773–77. http://dx.doi.org/10.1088/0022-3727/23/7/004.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hagoort, Jacques. "Ramey's Wellbore Heat Transmission Revisited". SPE Journal 9, nr 04 (1.12.2004): 465–74. http://dx.doi.org/10.2118/87305-pa.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Heat Transmission"

1

Etter, Christy L. "Numerical model of the transient behavior of a copper-water heat pipe". Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/19972.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Liang, Haodong. "Fractal Interfaces and Heat Transmission Problems". Digital WPI, 2013. https://digitalcommons.wpi.edu/etd-dissertations/124.

Pełny tekst źródła
Streszczenie:
The main portion of my thesis focuses on a 2-dimensional second order heat transmission problem in domains with pre-fractal interfaces. My focus is on the numerical approximation of the solutions. Precisely, I€™m concerned to develop a suitable mesh refinement algorithm that could be adapted to our situation, by taking into account the regularity of the solutions and the geometry of irregular pre-fractal interfaces. I obtain an error estimate between the weak solution and the discrete solution, which indicates an optimal rate of convergence as in the classical case when the solution has H^2-regularity. In addition, numerical simulations are also included, which demonstrates the features of our heat transmission model. Another portion of my thesis focuses on the asymptotic analysis of singular boundary value problems with highly conductive layers of pre-fractal type. My models illustrate the problems of a lower- dimensional highly conductive material intruding into a higher- dimensional material with lower conductivity. I consider a 2D model of Sierpinski pre-fractal layers and 3D models of hierarchical layers. The main results consist in the so-called Mosco-convergence of certain energy functionals, which implies the strong convergence of the solutions and of the spectral resolutions as a byproduct in real applications.
Style APA, Harvard, Vancouver, ISO itp.
3

Chu, Wun Wai. "Experimental study for the fully-developed single-phase heat transfer and friction factor in micro-fin tube". Thesis, University of Macau, 2011. http://umaclib3.umac.mo/record=b2493619.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Norris, Pamela Marie. "An investigation of coolant passage heat transfer in a diesel engine cylinder head". Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17633.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Pidgeon, Wesley. "Numerical analysis of heat conduction from a buried heat pipe". Thesis, Georgia Institute of Technology, 1985. http://hdl.handle.net/1853/18393.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Roth, Eric. "Transient heat transfer". PDXScholar, 1991. https://pdxscholar.library.pdx.edu/open_access_etds/4264.

Pełny tekst źródła
Streszczenie:
With the advent of the new high Tc superconductors, liquid nitrogen will be one of the preferred cryogens used to cool these materials. Consequently, a more thorough understanding of the heat transfer characteristics of liquid nitrogen is required. In our investigations we examine the transient heating characteristics of liquid nitrogen to states of nucleate and film boiling under different liquid flow conditions. Using a platinum hot wire technique, it is verified that there is a premature transition to film boiling in the transient case at power levels significantly lower than under steady state nucleate boiling conditions. It is also shown that the premature transition can be reduced or eliminated depending on the flow velocity.
Style APA, Harvard, Vancouver, ISO itp.
7

Baird, James Robert. "Phase change heat transfer in narrow passages". Thesis, Graduate School of Engineering, 2001. http://hdl.handle.net/2123/5130.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Leung, Sharon Shui Yee. "Heat transfer in microchannels : taylor flow". Thesis, The University of Sydney, 2012. http://hdl.handle.net/2123/17835.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Galarraga, Maider. "Heat balance of a historical church- transmission losses". Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-17137.

Pełny tekst źródła
Streszczenie:
The structure of old monumental churches differs a lot from contemporary buildings. The structural materials were wood, brick and stone. In order to construct high buildings with huge spans, thick massive walls and many massive columns were needed. Originally these buildings had no heating and for centuries the outdoor temperature determined the indoor climate. As churches are considered historical heritage buildings their renovation should be thoroughly studied.               In this thesis the transmission losses of Hamrånge church will be analysed. Hence, the transmission trough walls and windows as well as the heat buffering of materials will be examined. In addition, the effect of possible reformation measurements will be concluded.               Finally, this project belongs to a complete study of the church, were not only transmission losses are considered but also air infiltration losses and solar heat gain. That way, a comparison between them will be carried out in order to contribute to attain the objective of the project: possible restoration for church heating system with respect to preservation, energy requirements, thermal comfort and aesthetics.
Church project
Style APA, Harvard, Vancouver, ISO itp.
10

Norris, Pamela Marie. "An experimental investigation of heat transfer in a diesel engine cylinder head". Thesis, Georgia Institute of Technology, 1989. http://hdl.handle.net/1853/17590.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Heat Transmission"

1

McAdams, William H. Heat transmission. Wyd. 3. Malabar, Fla: R.E. Krieger Pub. Co., 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Mills, Anthony F. Heat transfer. Homewood, IL: Irwin, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Mills, Anthony F. Heat transfer. Wyd. 2. Upper Saddle River, N.J: Prentice Hall, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Nellis, Gregory. Heat transfer. 32 Avenue of the Americas, N.Y., NY: Cambridge University Press, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

S, Kakaç, red. Heat transfer enhancement of heat exchangers. Dordrecht: Kluwer Academic Publishers, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Hewitt, G. F. Process heat transfer. Boca Raton: CRC Press, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Simonson, John R. Engineering heat transfer. Wyd. 2. New York: Hemisphere Pub. Corp., 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Han, Je-Chin. Analytical heat transfer. Boca Raton, FL: CRC Press, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kreith, Frank. Principles of heat transfer. Wyd. 4. New York: Harper & Row, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Lienhard, John H. A heat transfer textbook. Mineola, N.Y: Dover Publications, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Heat Transmission"

1

Gorovits, Rena, i Henryk Czosnek. "Insect Symbiotic Bacterial GroEL (Chaperonin 60) and Plant Virus Transmission". W Heat Shock Proteins, 173–87. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-6787-4_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Luzzini, Paolo, i Paolo Musolino. "Periodic Transmission Problems for the Heat Equation". W Integral Methods in Science and Engineering, 211–23. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16077-7_17.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Steinbacher, Matthias, Gerrit Hellenbrand, Dieter Mevissen, Jens Brimmers i Christian Brecher. "Heat Treatment of 20MnCr5 and X20NiCrAlMoV6-5-2-1 for High Temperature Gear Applications". W Bearing and Transmission Steels Technology, 29–47. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2024. http://dx.doi.org/10.1520/stp164920220102.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Blümel, J., I. Schmidt, W. Effenberger, H. Seitz, H. Willkommen, H. H. Brackmann, J. Löwer i A. M. Eis-Hübinger. "Transmission of Parvovirus B19 by Heat-treated Coagulation Factor Concentrates". W 32nd Hemophilia Symposium Hamburg 2001, 149–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-18150-4_21.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Pechanek, R., V. Kindl i K. Hruska. "Air Gap Heat Transmission and Its Consideration in FEM Analyses". W Mechatronics 2013, 291–98. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02294-9_37.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Mishuris, Gennady, Wiktoria Miszuris i Andreas Öchsner. "Evaluation of Transmission Conditions for Thin Reactive Heat-Conducting Interphases". W Diffusion in Solids and Liquids III, 394–99. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-51-5.394.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Mishuris, Gennady, Wiktoria Miszuris i Andreas Öchsner. "Finite Element Verification of Transmission Conditions for 2D Heat Conduction Problems". W Materials Science Forum, 93–99. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-438-3.93.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Chen, Hongqing, Chunfa Jiang, Yunfei Su i Xiaowei Wang. "Temperature Distribution and Transmission in Multilayer Porous Asphalt Courses". W Lecture Notes in Civil Engineering, 321–29. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_29.

Pełny tekst źródła
Streszczenie:
AbstractThe objective of this paper was to investigate the temperature distribution and the law of temperature transmission in multilayer porous asphalt courses. Three types of multilayer porous asphalt courses are designed as the same thickness of actual pavements. In order to achieve this objective, experiments were conducted in an oven with different temperature, and samples were enwrapped with an efficient insulation material except the surface. The final temperature in samples is lower by 5~10 °C than ambient temperature and reduced gradually from top to bottom. The ability of heat transmission is related to the mixture’s air void and ambient temperature. The temperature transmission rate in porous asphalt mixture is lower than traditional dense graded asphalt mixture. At last, temperature transmission formulas of porous asphalt mixture are given.
Style APA, Harvard, Vancouver, ISO itp.
9

Öchsner, Andreas, i Wiktoria Miszuris. "Finite Element Verification of Transmission Conditions for Thin Reactive Heat-Conducting Interphases". W Diffusion in Solids and Liquids III, 400–405. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-51-5.400.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Priya, Bhanu, R. K. Poonia i Abhilasha Saini. "Analysis of First-Order Differential Equations in Temperature and Heat Transmission Problem". W Springer Proceedings in Energy, 91–100. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2870-5_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Heat Transmission"

1

Levorato, Marco, Nalini Venkatasubramanian i Nikil Dutt. "Heat-aware transmission strategies". W 2015 Information Theory and Applications Workshop (ITA). IEEE, 2015. http://dx.doi.org/10.1109/ita.2015.7308981.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

L, Natrayan. "Simulating laminar induced heat capacity and heat transmission convection using Al2O3 nanofluid". W International Conference on Mathematical and Statistical Physics, Computational Science, Education, and Communication (ICMSCE 2022), redaktorzy Lazim Abdullah i Norma bt Alias. SPIE, 2023. http://dx.doi.org/10.1117/12.2675557.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sato, Kimitoshi, Takushi Saito, Isao Satoh i Yasuo Kurosaki. "Heat Transfer in Laser Transmission Welding of Thermoplastics Using Functional Pigment". W International Heat Transfer Conference 12. Connecticut: Begellhouse, 2002. http://dx.doi.org/10.1615/ihtc12.3550.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Tomo, Yoko, Alexandros Askounis, Khellil Sefiane, Yasuyuki Takata i Koji Takahashi. "STUDY ON LIQUID-GAS INTERFACE AT NANOSCALE USING TRANSMISSION ELECTRON MICROSCOPY". W International Heat Transfer Conference 16. Connecticut: Begellhouse, 2018. http://dx.doi.org/10.1615/ihtc16.bae.023136.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Roth, Timothy, i Ann Anderson. "Liquid Crystal Thermography Using Light Transmission". W 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-3097.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Bravo, Richard J. "Inrush Current Behavior of Packaged Commercial Heat Pumps". W 2018 IEEE/PES Transmission and Distribution Conference and Exposition (T&D). IEEE, 2018. http://dx.doi.org/10.1109/tdc.2018.8440516.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Wang, Feng, Wensi Wang, Ruoyu You, Tengfei Zhang i Qingyan Chen. "EVALUATION OF DETERMINISTIC AND PROBABILISTIC MODELS FOR PREDICTING COVID-19 TRANSMISSION IN AIRLINER CABINS". W International Heat Transfer Conference 17. Connecticut: Begellhouse, 2023. http://dx.doi.org/10.1615/ihtc17.330-240.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Nguyen, Minh Y., Yong T. Yoon i Nack H. Choi. "Dynamic programming formulation of Micro-Grid operation with heat and electricity constraints". W 2009 Transmission & Distribution Conference & Exposition: Asia and Pacific. IEEE, 2009. http://dx.doi.org/10.1109/td-asia.2009.5356870.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Spinner, B., D. Stitou i N. Mazet. "New Sorption Cycles for Heat and/or Cold Production Adapted for Long Distance Heat Transmission". W ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33407.

Pełny tekst źródła
Streszczenie:
The analysis of the combinations of dipoles, linked by a gas transfer between an endothermic element and an exothermal element, through an exothermal physical-chemical process in thermal contact with an other endothermic process, is the basis of a new process for the transmission at long distance of heat/cold production. The yield of such cycles is identified through the values of the unused exergy, the untapped exergy and the exergy which is produced in excess by the process.
Style APA, Harvard, Vancouver, ISO itp.
10

Li, Kai-qin, Liang Du i Wei-heng Han. "Icing Analysis of Transmission Lines Considering the Current Heat". W 2011 Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2011. http://dx.doi.org/10.1109/appeec.2011.5748707.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Heat Transmission"

1

Wu, Yu-Shu. A comparison of analytical approaches for wellbore heat transmission in layered formations. Office of Scientific and Technical Information (OSTI), sierpień 1988. http://dx.doi.org/10.2172/6918217.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Unknown, Author. L51602 Criteria for Hot Tap Welding Further Studies. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), maj 1989. http://dx.doi.org/10.55274/r0010102.

Pełny tekst źródła
Streszczenie:
In the gas transmission industry there is a frequent need for modification of existing pipework. Modifications are made primarily by welding on additional pipes and branch connections to existing pipelines. The associated costs of shutting down a pipeline creates a situation whereby it becomes economically feasible to weld onto pipelines containing flowing, pressurized products. The risk of burn through and in particular, the susceptibility to cracking are greatly increased by the rapid cooling rates associated with the high heat sink effect of the flowing gas and in turn can result in excessive hardening of the heat affected zone in ferritic steels. Edison Welding Institute developed new criteria for safe hot tap welding procedures on all ferritic steels. Their approach is based on correlating field measurements of the ability of the pipe to conduct heat (i.e., its heat-sink capacity) to the cooling rate of the weld. Laboratory welding trials with simulated branch and sleeve connections on live pipelines containing natural gas were used to validate the new criteria. The results indicate that structurally sound hot tap repairs can be made with a high level of confidence.
Style APA, Harvard, Vancouver, ISO itp.
3

James, Christian, Ronald Dixon, Luke Talbot, Stephen James, Nicola Williams i Bukola Onarinde. Assessing the impact of heat treatment on antimicrobial resistant (AMR) genes and their potential uptake by other ‘live’ bacteria. Food Standards Agency, sierpień 2021. http://dx.doi.org/10.46756/sci.fsa.oxk434.

Pełny tekst źródła
Streszczenie:
Addressing the public health threat posed by AMR is a national strategic priority for the UK, which has led to both a 20-year vision of AMR and a 5-year (2019 to 2024) AMR National Action Plan (NAP). The latter sets out actions to slow the development and spread of AMR with a focus on antimicrobials. The NAP used an integrated ‘One-Health’ approach which spanned people, animals, agriculture and the environment, and calls for activities to “identify and assess the sources, pathways, and exposure risks” of AMR. The FSA continues to contribute to delivery of the NAP in a number of ways, including through furthering our understanding of the role of the food chain and AMR.Thorough cooking of food kills vegetative bacterial cells including pathogens and is therefore a crucial step in reducing the risk of most forms of food poisoning. Currently, there is uncertainty around whether cooking food is sufficient to denature AMR genes and mobile genetic elements from these ‘dead’ bacteria to prevent uptake by ‘live’ bacteria in the human gut and other food environments - therefore potentially contributing to the overall transmission of AMR to humans. This work was carried out to assess these evidence gaps.
Style APA, Harvard, Vancouver, ISO itp.
4

Williams i Maxey. NR198803 Evaluation of an X80 Pipe Fabricated from a Plate Processed using On-line Accelerated Cooling. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 1988. http://dx.doi.org/10.55274/r0010186.

Pełny tekst źródła
Streszczenie:
In recent years a number of important developments in steel making, rolling, and heat treatment have been applied to the production of plate for API Grades X65 through X80 line pipe. Based on industry interest in the performance of these steels in line pipe, a research task was to investigate the characteristics of representative examples of these new pipes. The objectives of this task are to provide independent measurements of pipe properties and to examine the metallurgical characteristics that may affect their performance in service. It is anticipated that information from the task will aid users in the selection of pipe for future gas-transmission lines. This report presents the results of an evaluation of an X80 pipe fabricated from a microalloyed, controlled-rolled steel processed using on-line accelerated cooling.
Style APA, Harvard, Vancouver, ISO itp.
5

Cola i Threadgill. L51548 Criteria for Hot Tap Welding. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), marzec 1988. http://dx.doi.org/10.55274/r0010128.

Pełny tekst źródła
Streszczenie:
There is a frequent need in the transmission industry to modify pipe work by welding on additional pipes and branches to existing pipelines. It is very expensive to shut down the pipeline during this operation, and it is therefore, customary to make these welds onto live pipelines. This procedure must be done with great care, since a burn through would allow the leak of pressurized products. However, a greater problem is the rapid cooling of any weld due to the high heat sink effect of the flowing gas. In ferritic steel pipelines, this can lead to excessive hardening of the heat-affected zone (HAZ) of the weld and a high risk of cracking. Although guidelines are available to help welding engineers design safe welding procedures for hot tap welding, these guidelines were developed specifically for high carbon equivalent steels and are excessively conservative for the less hardenable lower carbon steels that have recently been supplied. This work develops a new criteria for hot tap welding which will allow safe procedures to be developed easily for all ferritic steels. The approach being used is primarily experimental and a series of tests using simulated branch and sleeve connections have been welded with various electrodes (E7018, E6010 and E8010) and cooling rates and the extent of cracking determined. A parallel study is being made to develop a technique in which the heat sink capacity of a pipeline containing flowing pressurized gas can be easily measured in the field. Knowledge of this parameter will enable the welding engineer to select an appropriate welding procedure.
Style APA, Harvard, Vancouver, ISO itp.
6

Begg, Darren. PR-214-124506-R02 Toughness and Strength of Sub-Arc Double Jointed High Strength Pipe. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), sierpień 2017. http://dx.doi.org/10.55274/r0011418.

Pełny tekst źródła
Streszczenie:
Current design of pipelines calls for overmatching weld metal tensile strength, forcing deformation to occur in the base material and not in the weld. If straining of the weld metal were to occur, higher levels of weld metal toughness would be required to prevent fracture initiation from pre-existing defects. There are three known issues related to the Submerged Arc Welding (SAW) double jointing of pipeline steels: - Consistently achieving weld metal strength and toughness requirements. - Heat affected zone (HAZ) softening of the base material. - Lack of an accepted test protocol for the entire range of pipe grades. The results herein will help improve the quality and efficiency of SAW welding in double jointing for all pipeline steels, and enhance industry's ability to complete double jointing and standardize its acceptance, and will improve construction efficiency, pipeline reliability and safety by addressing this important research gap in transmission pipeline welding.
Style APA, Harvard, Vancouver, ISO itp.
7

Threadgill, P. L., i M. J. Cola. L51601 Review of Procedures for Welding Onto Pressurized Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), maj 1989. http://dx.doi.org/10.55274/r0010279.

Pełny tekst źródła
Streszczenie:
The welding of attachments onto pressurized pipelines and storage vessels (referred to as hot tapping) is a necessary and common operation in the transmission industry. Care must be exercised to choose a welding procedure that can reduce the risk of burn through and the formation of very high hardness levels in the heat-affected zone (HAZ) that can lead to a higher than normal risk of cracking. This report summarizes a state-of-the-art review of current procedures for hot tap welding on pressurized pipelines. All open literature related to hot tap welding were examined and catalogued, and areas requiring further research were identified. Although a large volume of literature exists on this subject, the majority gives accounts of successful repair work on specific items, rather than describing generalized safe procedures. The methods and controls vary widely; no national or industry standards exist.
Style APA, Harvard, Vancouver, ISO itp.
8

Clapham. L52206 3D Details of Defect-Induced MFL and Stress in Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 2002. http://dx.doi.org/10.55274/r0011358.

Pełny tekst źródła
Streszczenie:
The following report represents a continuation of our ongoing efforts to understand and quantify the effect of stress on MFL signals from oil and gas transmission line inspection tools. Earlier GRI funding has enabled us to develop an unprecedented understanding of stress effects on magnetic behaviour in pipeline steels, and this understanding is now further enhanced and applied to specific problems such as MFL signals from interacting defects and also MFL signals produced from mechanical damage. This report summarizes the result of the 2002 studies. These studies focused on 3 main areas: MFL signals from interacting defects � examined how magnetic behaviour is altered when two pits are sufficiently close that their stress and magnetization fields interact. This produces MFL signal effects that differ from those of isolated defects. MFL signal dependence on elastic, plastic and residual strain � this continues our fundamental investigation into stress effects. By combining applied uniaxial strain and stress-relief heat treatments, we have been able to show how magnetic behaviour and MFL signals respond to different types of deformation. Specifically, we have found the elastic deformation has a significant effect, but that plastic deformation does not. This is a fundamental result on which our further modeling and experimental studies are based. MFL signals from mechanical damage � this is the first year we have turned our attention to this specific area, however our earlier results have laid the groundwork for these studies. MFL signals from dents contain geometry and stress components. We have conducted experimental and finite element modeling studies of MFL signals from dented samples, and have shown that the MFL signal from shallow dents arises from the residual stress pattern, while severe dent signals are mainly related to dent geometry. This work forms the main part of a continuing study.
Style APA, Harvard, Vancouver, ISO itp.
9

Taylor. L51755 Development and Testing of an Advanced Technology Vibration Transmission. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), lipiec 1996. http://dx.doi.org/10.55274/r0010124.

Pełny tekst źródła
Streszczenie:
Fiber optic sensors have been under development in industrial and government laboratories around the world for over a decade. The commercial market for fiber sensors for measuring parameters such as temperature, displacement, and liquid level is now estimated to exceed $100 M/year. Aside from the commercial interest, the U. S. Department of Defense has vigorously pursued the development of fiber gyroscopes and hydrophones. In spite of the high level of research and development activity, however, until recently fiber sensors had not been successfully applied in high-temperature engine environments. The goal of this effort is to develop and test high-temperature fiber optic sensors and show that they are suitable for monitoring vibration and other instabilities in gas turbine engines. The underlying technology developed during the course of PRCI projects PR- 219-9120 and PR-219-9225 during 1991-94 serves as the foundation for PR-240-9416. Transducers with the fiber optic Fabry-Perot interferometer (FFPI) configuration have been adapted for use in the turbomachinery environment.To ensure the survival of the FFPI sensors at high temperatures, two techniques for coating the fibers with metal have been developed: electroplating and vacuum deposition. Coated sensors have subsequently been embedded in aluminum and brass alloys. Experiments on a small Sargent Welch turbine engine have shown the high sensitivity of embedded FFPI strain sensors to vibration in rolling bearings. Data have been collected in both the time and frequency domain. A new accelerometer design in which a metal-coated fiber containing the FFPI element is soldered directly to a diaphragm in a stainless steel housing shows response similar to a piezoelectric accelerometer in shaker table tests. The high sensitivity of the FFPI accelerometer has been demonstrated in field tests in a Solar Centaur turbine engine, and the design has survived temperatures greater than 500�C in a test oven. A magnetometer with a physical configuration similar to that of the accelerometer has been used to measure the distance from the sensor head to a rotating shaft made of ferromagnetic material. This device, which functions as a proximity probe, has been used to monitor shaft rotation rate (keyphasor application) and as a shaft thrust position sensor. These results indicate the potential for performing critical measurements in turbine engines with FFPI sensors. They can measure acceleration, distance (proximity), strain (as it relates to bearing defect diagnosis), and gas pressure, and can operate at higher temperatures than conventional transducers.
Style APA, Harvard, Vancouver, ISO itp.
10

Genetically informed family research, and anti-racism in mental health research - In Conversation with Dr. Yasmin Ahmadzadeh. ACAMH, sierpień 2021. http://dx.doi.org/10.13056/acamh.16740.

Pełny tekst źródła
Streszczenie:
We hear how Dr. Yasmin Ahmadzadeh helped to set up the Twins Early Development Study, CoTEDS, her research on genetically informed methods to examine the intergenerational transmission of psychopathology, advice for those considering a part-time PhD, and anti-racism in mental health research.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Heat Transmission” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii